-
Flow rate from a vertical silo with a tilted orifice
Authors:
Ryan Kozlowski,
Luis A. Pugnaloni
Abstract:
The flow of dry granular materials from silos is of great practical interest in industry and of theoretical import for understanding multiphase dynamics. Recent studies have demonstrated that one way to control the rate of flow from a silo is to tilt it. However, this may not be practical in many industrial applications. Here, we demonstrate in experiments of quasi-2D silo discharge of monodispers…
▽ More
The flow of dry granular materials from silos is of great practical interest in industry and of theoretical import for understanding multiphase dynamics. Recent studies have demonstrated that one way to control the rate of flow from a silo is to tilt it. However, this may not be practical in many industrial applications. Here, we demonstrate in experiments of quasi-2D silo discharge of monodisperse grains that the flow rate can be modulated by rotating the orifice - through elevating and shifting one side of the base - instead of tilting the entire silo. We use high-speed image analysis to track the average motion of grains in the silo. We first show that the flow rate decreases with orifice angle, but that this decrease is not as strong as when a silo is tilted or when a lateral orifice is used. However, with the addition of a grain-sized ridge on each side of the orifice, the flow rate collapses with prior tilted-silo results. We then characterize the flow velocity of grains exiting the orifice and highlight key features of the stagnant zones and slip zones on each orifice side. Finally, we model our results based on these measurements, demonstrating the importance of horizontal creep along slip zones next to the orifice and the narrowest opening cross-section through which the material flows. These findings reveal a simple method for controlling both flow rate and direction, and highlight the importance of both dynamics within and geometry of the stagnant zones near the orifice.
△ Less
Submitted 4 February, 2025;
originally announced February 2025.
-
Intruder in a two-dimensional granular system: statics and dynamics of force networks in an experimental system experiencing stick-slip dynamics
Authors:
R. Basak,
R. Kozlowski,
L. A. Pugnaloni,
M. Kramar,
E. S. Socolar,
C. M. Carlevaro,
L. Kondic
Abstract:
In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data doe…
▽ More
In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data does not include precise information about individual contact forces, we use an approach developed in our previous work (Basak et al, J. Eng. Mechanics (2021)) based on networks constructed from measurements of the integrated strain magnitude on each particle. These networks are analyzed using topological measures based on persistence diagrams, revealing that force networks evolve smoothly but in a nontrivial manner throughout each sticking period, even though the intruder and granular particles are stationary. Characteristic features of persistence diagrams show identifiable changes as a slip is approaching, indicating the existence of slip precursors. Key features of the dynamics are similar for granular materials composed of disks or pentagons, but some details are consistently different. In particular, we find significantly larger fluctuations of the measures computed based on persistence diagrams, and therefore of the underlying networks, for systems of pentagonal particles.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
Average outpouring velocity and flow rate of grains discharged from a tilted quasi-2D silo
Authors:
Ryan Kozlowski,
J. Carter Luketich,
Elijah Oshatz,
Douglas J. Durian,
Luis A. Pugnaloni
Abstract:
The flow of granular materials through constricted openings is important in many natural and industrial processes. These complex flows - featuring dense, dissipative flow in the bulk but low-dissipation, low density outpouring in the vicinity of the orifice - have long been characterized empirically by the Beverloo rule and, recently, modeled successfully using energy balance. The dependence of fl…
▽ More
The flow of granular materials through constricted openings is important in many natural and industrial processes. These complex flows - featuring dense, dissipative flow in the bulk but low-dissipation, low density outpouring in the vicinity of the orifice - have long been characterized empirically by the Beverloo rule and, recently, modeled successfully using energy balance. The dependence of flow rate on the silo's angle with respect to gravity, however, is not captured by current models. We experimentally investigate the role of tilt angle in this work using a quasi-2D monolayer of grains in a silo. We measure mass flow rate, the average exit velocities of grains, and the packing fraction along the orifice with varying tilt angles. We propose a model that describes our results (and earlier findings with 3D systems [H. G. Sheldon and D. J. Durian, Granul. Matter 12, 579 (2010)]) by considering the dependence of outpouring speed and angle with respect to the orifice angle and, importantly, the angle of stagnant zones adjacent to the orifice. We conclude by posing questions about possible extensions of our model in order to describe spatial variations of exit velocity and density along the orifice cross section.
△ Less
Submitted 20 January, 2023; v1 submitted 11 October, 2022;
originally announced October 2022.
-
On the use of magnetic particles to enhance the flow of vibrated grains through narrow apertures
Authors:
C. Manuel Carlevaro,
Marcelo N Kuperman,
Sebastián Bouzat,
Luis A Pugnaloni,
Marcos A Madrid
Abstract:
The flow of grains through narrow apertures posses an extraordinary challenge: clogging. Strategies to alleviate the effect of clogging, such as the use of external vibration, are always part of the design of machinery for the handling of bulk materials. It has recently been shown that one way to reduce clogging is to use a small fraction of small particles as an additive. Besides, several works r…
▽ More
The flow of grains through narrow apertures posses an extraordinary challenge: clogging. Strategies to alleviate the effect of clogging, such as the use of external vibration, are always part of the design of machinery for the handling of bulk materials. It has recently been shown that one way to reduce clogging is to use a small fraction of small particles as an additive. Besides, several works reported that self-repelling magnetic grains can flow through narrow apertures with little clogging, which suggest these are excellent candidates as "lubricating" additives for other granular materials. In this work, we study the effect of adding self-repelling magnetic particles to a sample of grains in two-dimensions. We find that, in contrast with intuition, the added magnetic grains not necessarily aid the flow of the original species.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Enhancement of the flow of vibrated grains through narrow apertures by addition of small particles
Authors:
Marcos A. Madrid,
C. Manuel Carlevaro,
Luis A. Pugnaloni,
Marcelo Kuperman,
Sebastián Bouzat
Abstract:
We analyze the flow and clogging of circular grains passing through a small aperture under vibration in two dimensions. Via Discrete Element Method simulations, we show that when grains smaller than the original ones are introduced in the system as an additive, the net flow of the original species can be significantly increased. Moreover, there is an optimal radius of the additive particles that m…
▽ More
We analyze the flow and clogging of circular grains passing through a small aperture under vibration in two dimensions. Via Discrete Element Method simulations, we show that when grains smaller than the original ones are introduced in the system as an additive, the net flow of the original species can be significantly increased. Moreover, there is an optimal radius of the additive particles that maximizes the effect. This finding may constitute the basis for technological applications not only concerning the flow of granular materials but also regarding active matter, including pedestrian evacuation.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Two approaches to quantification of force networks in particulate systems
Authors:
Rituparna Basak,
C. Manuel Carlevaro,
Ryan Kozlowski,
Chao Cheng,
Luis A. Pugnaloni,
Miroslav Kramar,
Hu Zheng,
Joshua E. S. Socolar,
Lou Kondic
Abstract:
The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interpartic…
▽ More
The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interparticle forces. In this work, we show by analysis of the data extracted from simulations that such detailed information about interparticle forces may not be necessary, as long as the focus is on extracting the most dominant features of these networks. The main finding is that a reasonable understanding of the time evolution of force networks can be obtained from incomplete information such as total force on the particles. To compare the evolution of the networks based on the completely known particle interactions and the networks based on incomplete information (total force each grain) we use tools of algebraic topology. In particular we will compare simple measures defined on persistence diagrams that provide useful summaries of the force network features.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Effect of the granular material on the maximum holding force of a granular gripper
Authors:
Julián M. Gómez--Paccapelo,
Angel A. Santarossa,
H. Daniel Bustos,
Luis A. Pugnaloni
Abstract:
A granular gripper is a device used to hold objects by taking advantage of the phenomenon of Reynold's dilatancy. A membrane containing a granular sample is allowed to deform around the object to be held and then vacuum is used to jam the granular material inside the membrane. This allows to hold the object against external forces since deformation of the granular material is prevented by not allo…
▽ More
A granular gripper is a device used to hold objects by taking advantage of the phenomenon of Reynold's dilatancy. A membrane containing a granular sample is allowed to deform around the object to be held and then vacuum is used to jam the granular material inside the membrane. This allows to hold the object against external forces since deformation of the granular material is prevented by not allowing the system to increase its volume. The maximum holding force supported by the gripper depends on a number of variables. In this work, we show that in the regime of frictional holding (where the gripper does not interlock with the object), the maximum holding force does not depend on the granular material used to fill the membrane. Results for a variety of granular materials can be collapsed into a single curve if maximum holding force is plotted against the penetration depth achieved. The results suggest that the most important feature in selecting a particular granular material is its deformability to ensure an easy flow during the initial phase of the gripping process.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Effect of lateral confinement on the apparent mass of particle dampers
Authors:
María Victoria Ferreyra,
Mauro Baldini,
Luis A. Pugnaloni,
Stéphane Job
Abstract:
We study, via DEM simulations, the apparent mass $m$ and loss factor $η$ of particle dampers (PD) attached to a vertically driven, single degree of freedom mechanical system. Although many studies focus on $η$, less work has been devoted to $m$. It has been recently demonstrated [M. Masmoudi \textit{et al}. Granular Matter 18 (2016) 71.] that $m$ non-linearly depends on the driving acceleration…
▽ More
We study, via DEM simulations, the apparent mass $m$ and loss factor $η$ of particle dampers (PD) attached to a vertically driven, single degree of freedom mechanical system. Although many studies focus on $η$, less work has been devoted to $m$. It has been recently demonstrated [M. Masmoudi \textit{et al}. Granular Matter 18 (2016) 71.] that $m$ non-linearly depends on the driving acceleration $γ$ according to a power law, $m\proptoγ^k$. Experiments using 3D packings of particles suggest $k=-2$. However, simulations with 1D columns of particles on a vibrating plate and theoretical predictions based on the inelastic bouncing ball model (IBBM) suggest that $k=-1$. These findings left open questions whether m may depend on the dimensionality of the packing or on lateral interactions between walls and grains. In turn, $η$ was shown to follow a universal curve, $η\proptoγ^{-1}$, whatever the dimensionality and the constraints in the motion of the grains. In this work, we consider PD under different confinement conditions in the motion of the particles (1D, quasi-1D, quasi-2D and 3D). We find that the dynamical response of the PD ($m$ and $η$) is not sensitive to the lateral confinement or dimensionality. However, we have observed two distinct regimes: (i) In the inertial regime, $η$ decays according to the IBBM for all dimensions, $η\proptoγ^{-1}$, while $m$ falls with an apparent power law behaviour that matches Masmoudi's experiments, $m\proptoγ^{-2}$, for all dimensions but only in the range of moderate acceleration, before becoming negative for very high accelerations. (ii) In the quasi-static regime, both $m$ and $η$ display a complex behavior as functions of the excitation amplitude, but tend to the IBBM prediction, $m\proptoγ^{-1}$ and $η\proptoγ^{-1}$.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Differential equation for the flow rate of discharging silos based on energy balance
Authors:
J. R. Darias,
Marcos A. Madrid,
Luis A. Pugnaloni
Abstract:
Since the early work of Hagen in 1852 and Beverloo et al. in 1961, the flow rate of granular material discharging through a circular orifice from a silo has been described by means of dimensional analysis and experimental fits, and explained through the "free fall arch" model. Here, in contrast with the traditional approach, we derive a differential equation based on the energy balance of the syst…
▽ More
Since the early work of Hagen in 1852 and Beverloo et al. in 1961, the flow rate of granular material discharging through a circular orifice from a silo has been described by means of dimensional analysis and experimental fits, and explained through the "free fall arch" model. Here, in contrast with the traditional approach, we derive a differential equation based on the energy balance of the system. This equation is consistent with the well known Beverloo rule thanks to a compensation of energy terms. Moreover, this new equation can be used to explore new conditions for silo discharges. In particular, we show how the effect of friction on the flow rate can be predicted. The theory is validated using discrete element method simulations.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Velocity profiles in forced silo discharges
Authors:
Marcos A. Madrid,
Luis A. Pugnaloni
Abstract:
When a granular material is freely discharged from a silo through an orifice at its base, the flow rate remains constant throughout the discharge. However, it has been recently shown that, if the discharge is forced by an overweight, the flow rate increases at the final stages of the discharge, in striking contrast to viscous fluids [Madrid et al. Europhys. Lett. (2018)]. {Although the general mec…
▽ More
When a granular material is freely discharged from a silo through an orifice at its base, the flow rate remains constant throughout the discharge. However, it has been recently shown that, if the discharge is forced by an overweight, the flow rate increases at the final stages of the discharge, in striking contrast to viscous fluids [Madrid et al. Europhys. Lett. (2018)]. {Although the general mechanism that drives this increase in the flow rate has been discussed, there exist yet a number of open questions regarding this phenomenon. One such questions is to what extent is the internal velocity profile affected, beyond the trivial overall increase consistent with the increasing flow rate.} We study via Discrete Element Method simulations the internal velocity profiles during forced silo discharges and compare them with those of free discharges. The changes in velocity profiles are somewhat subtle. Interestingly, during free discharges, while the velocity profiles are steady at the silo base and above a height equivalent to one silo diameter, there exists a transition region where the profile evolves in time, despite the constant flow rate. In contrast, forced discharges present steady profiles at all heights of the granular column during the initial constant flow phase, followed by an overall increase of the velocities when the acceleration phase develops.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Intruder in a two-dimensional granular system: Effects of dynamic and static basal friction on stick-slip and clogging dynamics
Authors:
C. Manuel Carlevaro,
Ryan Kozlowski,
Luis A. Pugnaloni,
Hu Zheng,
Joshua E. S. Socolar,
Lou Kondic
Abstract:
We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to s…
▽ More
We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to stick-slip. Here we first show that our simulation results are in excellent agreement with the experimental data for a variety of experimentally accessible friction coefficients governing interactions of particles with each other and with boundaries. Then, we use simulations to explore a broader range of parameter space, focusing on the friction between the particles and the base. We consider a range of both static and dynamic basal friction coefficients, which are difficult to vary smoothly in experiments. The simulations show that dynamic friction strongly affects the stick-slip behaviour when the coefficient is decreased below 0.1, while static friction plays only a marginal role in the intruder dynamics.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Dynamics of a grain-scale intruder in a two-dimensional granular medium with and without basal friction
Authors:
Ryan Kozlowski,
C. Manuel Carlevaro,
Karen E. Daniels,
Lou Kondic,
Luis A. Pugnaloni,
Joshua E. S. Socolar,
Hu Zheng,
Robert P. Behringer
Abstract:
We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical…
▽ More
We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical regimes: intermittent flow, in which the intruder moves freely most of the time but occasionally gets stuck, and stick-slip dynamics, in which the intruder advances via a sequence of distinct, rapid events. When basal friction is present, we observe a smooth crossover between the two regimes as a function of packing fraction, and we find that reducing the interparticle friction coefficient causes the stick-slip regime to shift to higher packing fractions. When basal friction is eliminated, we observe intermittent flow at all accessible packing fractions. For all cases, we present results for the statistics of stick events, the intruder velocity, and the force exerted on the intruder by the grains. Our results indicate the qualitative importance of basal friction at high packing fractions and suggest a possible connection between intruder dynamics in a static material and clogging dynamics in granular flows.
△ Less
Submitted 8 October, 2019; v1 submitted 30 May, 2019;
originally announced May 2019.
-
Forced flow of granular media: Breakdown of the Beverloo scaling
Authors:
Marcos A. Madrid,
J. R. Darias,
Luis A. Pugnaloni
Abstract:
The Beverloo scaling for the gravity flow of granular materials through orifices has two distinct universal features. On the one hand, the flow rate is independent of the height of the granular column. On the other hand, less well-known yet more striking, the flow rate is fairly insensitive to the material properties of the grains (density, Young's modulus, friction coefficient, etc.). We show tha…
▽ More
The Beverloo scaling for the gravity flow of granular materials through orifices has two distinct universal features. On the one hand, the flow rate is independent of the height of the granular column. On the other hand, less well-known yet more striking, the flow rate is fairly insensitive to the material properties of the grains (density, Young's modulus, friction coefficient, etc.). We show that both universal features are lost if work is done on the system at a high rate. In contrast to viscous fluids, the flow rate increases during discharge if a constant pressure is applied to the free surface of a granular column. Moreover, the flow rate becomes sensitive to the material properties. Nevertheless, a new universal feature emerges: the dissipated power scaled by the mean pressure and the flow rate follows a master curve for forced and unforced conditions and for all material properties studied. We show that this feature can be explained if the granular flow in the silo is assumed to be a quasistatic shear flow under the $μ(I)$-rheology.
△ Less
Submitted 14 May, 2020; v1 submitted 9 March, 2017;
originally announced March 2017.
-
Ergodic-nonergodic transition in tapped granular systems: The role of persistent contacts
Authors:
Paula A. Gago,
Diego Maza,
Luis A. Pugnaloni
Abstract:
Static granular packs have been studied in the last three decades in the frame of a modified equilibrium statistical mechanics that assumes ergodicity as a basic postulate. The canonical example on which this framework is tested consists in the series of static configurations visited by a granular column subjected to taps. By analyzing the response of a realistic model of grains, we demonstrate th…
▽ More
Static granular packs have been studied in the last three decades in the frame of a modified equilibrium statistical mechanics that assumes ergodicity as a basic postulate. The canonical example on which this framework is tested consists in the series of static configurations visited by a granular column subjected to taps. By analyzing the response of a realistic model of grains, we demonstrate that volume and stress variables visit different regions of the phase space at low tap intensities in different realizations of the experiment. We show that the tap intensity beyond which sampling by tapping becomes ergodic coincides with the forcing necessary to break all particle-particle contacts during each tap. These results imply that the well-known "reversible" branch of tapped granular columns is only valid at relatively high tap intensities.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
A differential equation for the flow rate during silo discharge: Beyond the Beverloo rule
Authors:
Marcos A. Madrid,
José R. Darias,
Luis A. Pugnaloni
Abstract:
We present a differential equation for the flow rate of granular materials during the discharge of a silo. This is based in the energy balance of the variable mass system in contrast with the traditional derivations based on heuristic postulates such as the free fall arch. We show that this new equation is consistent with the well known Beverloo rule, providing an independent estimate for the univ…
▽ More
We present a differential equation for the flow rate of granular materials during the discharge of a silo. This is based in the energy balance of the variable mass system in contrast with the traditional derivations based on heuristic postulates such as the free fall arch. We show that this new equation is consistent with the well known Beverloo rule, providing an independent estimate for the universal Beverloo prefactor. We also find an analytic expression for the pressure under discharging conditions.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
Wang-Landau algorithm for entropic sampling of arch-based microstates in the volume ensemble of static granular packings
Authors:
D. Slobinsky,
Luis A. Pugnaloni
Abstract:
We implement the Wang-Landau algorithm to sample with equal probabilities the static configurations of a model granular system. The "non-interacting rigid arch model" used is based on the description of static configurations by means of splitting the assembly of grains into sets of stable arches. This technique allows us to build the entropy as a function of the volume of the packing for large sys…
▽ More
We implement the Wang-Landau algorithm to sample with equal probabilities the static configurations of a model granular system. The "non-interacting rigid arch model" used is based on the description of static configurations by means of splitting the assembly of grains into sets of stable arches. This technique allows us to build the entropy as a function of the volume of the packing for large systems. We make a special note of the details that have to be considered when defining the microstates and proposing the moves for the correct sampling in these unusual models. We compare our results with previous exact calculations of the model made at moderate system sizes. The technique opens a new opportunity to calculate the entropy of more complex granular models.
△ Less
Submitted 5 October, 2015;
originally announced August 2016.
-
Structure of force networks in tapped particulate systems of disks and pentagons (Part 1): Clusters and Loops
Authors:
L. A. Pugnaloni,
C. M. Carlevaro,
M. Kramar,
K. Mischaikow,
L. Kondic
Abstract:
The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of…
▽ More
The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of tapped systems built from frictional disks and pentagons, and study the structure of the force networks of granular packings by considering network's topology as force thresholds are varied. We show that the number of clusters and loops observed in the force networks as a function of the force threshold are markedly different for disks and pentagons if the tangential contact forces are considered, whereas they are surprisingly similar for the network defined by the normal forces. In particular, the results indicate that, overall, the force network is more heterogeneous for disks than for pentagons. Additionally, we show that the states obtained by tapping with different intensities that display similar packing fraction are difficult to distinguish based on simple topological invariants.
△ Less
Submitted 11 October, 2015;
originally announced October 2015.
-
Experimental proof of Faster-is-Slower in multi-particle systems flowing through bottlenecks
Authors:
José M. Pastor,
Angel Garcimartín,
Paula A. Gago,
Juan P. Peralta,
César Martín-Gómez,
Luis M. Ferrer,
Diego Maza,
Daniel R. Parisi,
Luis A. Pugnaloni,
Iker Zuriguel
Abstract:
The "faster-is-slower" (FIS) effect was first predicted by computer simulations of the egress of pedestrians through a narrow exit [Helbing D, Farkas I J, Vicsek T, Nature 407:487-490 (2000)]. FIS refers to the finding that, under certain conditions, an excess of the individuals' vigor in the attempt to exit causes a decrease in the flow rate. In general, this effect is identified by the appearanc…
▽ More
The "faster-is-slower" (FIS) effect was first predicted by computer simulations of the egress of pedestrians through a narrow exit [Helbing D, Farkas I J, Vicsek T, Nature 407:487-490 (2000)]. FIS refers to the finding that, under certain conditions, an excess of the individuals' vigor in the attempt to exit causes a decrease in the flow rate. In general, this effect is identified by the appearance of a minimum when plotting the total evacuation time of a crowd as a function of the pedestrian desired velocity. Here, we experimentally show that the FIS effect indeed occurs in three different systems of discrete particles flowing through a constriction: (a) humans evacuating a room, (b) a herd of sheep entering a barn and (c) grains flowing out a 2D hopper over a vibrated incline. This finding suggests that FIS is a universal phenomenon for active matter passing through a narrowing.
△ Less
Submitted 29 June, 2015;
originally announced July 2015.
-
Flow rate of polygonal grains through a bottleneck: Interplay between shape and size
Authors:
Ezequiel Goldberg,
C. Manuel Carlevaro,
Luis A. Pugnaloni
Abstract:
We report two-dimensional simulations of circular and polygonal grains passing through an aperture at the bottom of a silo. The mass flow rate for regular polygons is lower than for disks as observed by other authors. We show that both the exit velocity of the grains and the packing fraction are lower for polygons, which leads to the reduced flow rate. We point out the importance of the criteria u…
▽ More
We report two-dimensional simulations of circular and polygonal grains passing through an aperture at the bottom of a silo. The mass flow rate for regular polygons is lower than for disks as observed by other authors. We show that both the exit velocity of the grains and the packing fraction are lower for polygons, which leads to the reduced flow rate. We point out the importance of the criteria used to define when two objects of different shape are considered to be of the same size. Depending on this criteria, the mass flow rate may vary significantly for some polygons. Moreover, the particle flow rate is non-trivially related to a combination of mass flow rate, particle shape and particle size. For some polygons, the particle flow rate may be lower or higher than that of the corresponding disks depending on the size comparison criteria.
△ Less
Submitted 21 May, 2015;
originally announced May 2015.
-
Arch-based configurations in the volume ensemble of static granular systems
Authors:
D. Slobinsky,
Luis A. Pugnaloni
Abstract:
We propose an alternative approach to count the microscopic static configurations of granular packs under gravity by considering arches. This strategy simplifies the problem of filtering out configurations that are not mechanically stable, opening the way for a range of granular models to be studied via ensemble theory. Following this arch-based approach, we have obtained the exact density of stat…
▽ More
We propose an alternative approach to count the microscopic static configurations of granular packs under gravity by considering arches. This strategy simplifies the problem of filtering out configurations that are not mechanically stable, opening the way for a range of granular models to be studied via ensemble theory. Following this arch-based approach, we have obtained the exact density of states for a two-dimensional non-interacting rigid arch model of granular assemblies. The calculated arch size distribution and volume fluctuations show qualitative agreement with realistic simulations of tapped granular beds. We have also validated our calculations by comparing with the analytic solution for the limiting case of a quasi-one-dimensional column of frictionless disks.
△ Less
Submitted 27 November, 2014;
originally announced November 2014.
-
Exact predictions from Edwards ensemble vs. realistic simulations of tapped narrow two-dimensional granular columns
Authors:
Ramiro M. Irastorza,
C. Manuel Carlevaro,
Luis A. Pugnaloni
Abstract:
We simulate via a Discrete Element Method the tapping of a narrow column of disk under gravity. For frictionless disks, this system has a simple analytic expression for the density of states in the Edwards volume ensemble. We compare the predictions of the ensemble at constant compactivity against the results for the steady states obtained in the simulations. We show that the steady states cannot…
▽ More
We simulate via a Discrete Element Method the tapping of a narrow column of disk under gravity. For frictionless disks, this system has a simple analytic expression for the density of states in the Edwards volume ensemble. We compare the predictions of the ensemble at constant compactivity against the results for the steady states obtained in the simulations. We show that the steady states cannot be properly described since the microstates sampled are not in correspondence with the predicted distributions, suggesting that the postulates of flat measure and ergodicity are, either or both, invalid for this simple realization of a static granular system. However, we show that certain qualitative features of the volume fluctuations difficult to predict from simple arguments are captured by the theory.
△ Less
Submitted 5 November, 2013;
originally announced November 2013.
-
Universal response of optimal granular damping devices
Authors:
Martín Sánchez,
Gustavo Rosenthal,
Luis A. Pugnaloni
Abstract:
Granular damping devices constitute an emerging technology for the attenuation of vibrations based on the dissipative nature of particle collisions. We show that the performance of such devices is independent of the material properties of the particles for working conditions where damping is optimal. Even the suppression of a dissipation mode (collisional or frictional) is unable to alter the resp…
▽ More
Granular damping devices constitute an emerging technology for the attenuation of vibrations based on the dissipative nature of particle collisions. We show that the performance of such devices is independent of the material properties of the particles for working conditions where damping is optimal. Even the suppression of a dissipation mode (collisional or frictional) is unable to alter the response. We explain this phenomenon in terms of the inelastic collapse of granular materials. These findings provide a crucial standpoint for the design of such devices in order to achieve the desired low maintenance feature that makes particle dampers particularly suitable to harsh environments.
△ Less
Submitted 29 May, 2012; v1 submitted 9 January, 2012;
originally announced January 2012.
-
Creep motion of a model frictional system
Authors:
Baptiste Blanc,
Luis A. Pugnaloni,
Jean-Christophe Géminard
Abstract:
We report on the dynamics of a model frictional system submitted to minute external perturbations. The system consists of a chain of sliders connected through elastic springs that rest on an incline. By introducing cyclic expansions and contractions of the springs we observe a reptation of the chain. We account for the average reptation velocity theoretically. The velocity of small systems exhibit…
▽ More
We report on the dynamics of a model frictional system submitted to minute external perturbations. The system consists of a chain of sliders connected through elastic springs that rest on an incline. By introducing cyclic expansions and contractions of the springs we observe a reptation of the chain. We account for the average reptation velocity theoretically. The velocity of small systems exhibits a series of plateaus as a function of the incline angle. Due to elastic e ects, there exists a critical amplitude below which the reptation is expected to cease. However, rather than a full stop of the creep, we observe in numerical simulations a transition between a continuous-creep and an irregular-creep regime when the critical amplitude is approached. The latter transition is reminiscent of the transition between the continuous and the irregular compaction of granular matter submitted to periodic temperature changes.
△ Less
Submitted 22 December, 2011;
originally announced December 2011.
-
Arches and contact forces in a granular pile
Authors:
C. Manuel Carlevaro,
Luis A. Pugnaloni
Abstract:
Assemblies of granular particles mechanically stable under their own weight contain arches. These are structural units identified as sets of mutually stable grains. It is generally assumed that these arches shield the weight above them and should bear most of the stress in the system. We test such hypothesis by studying the stress born by in-arch and out-of-arch grains. We show that, indeed, parti…
▽ More
Assemblies of granular particles mechanically stable under their own weight contain arches. These are structural units identified as sets of mutually stable grains. It is generally assumed that these arches shield the weight above them and should bear most of the stress in the system. We test such hypothesis by studying the stress born by in-arch and out-of-arch grains. We show that, indeed, particles in arches withstand larger stresses. In particular, the isotropic stress tends to be larger for in-arch-grains whereas the anisotropic component is marginally distinguishable between the two types of particles. The contact force distributions demonstrate that an exponential tail (compatible with the maximization of entropy under no extra constraints) is followed only by the out-of-arch contacts. In-arch contacts seem to be compatible with a Gaussian distribution consistent with a recently introduced approach that takes into account constraints imposed by the local force balance on grains.
△ Less
Submitted 29 May, 2012; v1 submitted 21 October, 2011;
originally announced October 2011.
-
Effect of packing fraction on the jamming of granular flow through small apertures
Authors:
Rodolfo Omar Uñac,
Ana María Vidales,
Luis A. Pugnaloni
Abstract:
We investigate the flow and jamming through small apertures of a column of granular disks via a pseudo-dynamic model. We focus on the effect that the preparation of the granular assembly has on the size of the avalanches obtained. Ensembles of packings with different mean packing fractions are created by tapping the system at different intensities. Surprisingly, packing fraction is not a good indi…
▽ More
We investigate the flow and jamming through small apertures of a column of granular disks via a pseudo-dynamic model. We focus on the effect that the preparation of the granular assembly has on the size of the avalanches obtained. Ensembles of packings with different mean packing fractions are created by tapping the system at different intensities. Surprisingly, packing fraction is not a good indicator of the ability of the deposit to jam a given orifice. Different mean avalanche sizes are obtained for deposits with the same mean packing fraction that were prepared with very different tap intensities. It has been speculated that the number and size of arches in the bulk of the granular column should be correlated with the ability of the system to jam a small opening. We show that this correlation, if exists, is rather poor. A comparison between bulk arches and jamming arches (i.e., arches that block the opening) reveals that the aperture imposes a lower cut-off on the horizontal span of the arches which is greater than the actual size of the opening. This is related to the fact that blocking arches have to have the appropriate orientation to fit the gap between two piles of grains resting at each side of the aperture.
△ Less
Submitted 29 May, 2012; v1 submitted 21 October, 2011;
originally announced October 2011.
-
Master curves for the stress tensor invariants in stationary states of static granular beds. Implications for the thermodynamic phase space
Authors:
Luis A. Pugnaloni,
José Damas,
Iker Zuriguel,
Diego Maza
Abstract:
We prepare static granular beds under gravity in different stationary states by tapping the system with pulsed excitations of controlled amplitude and duration. The macroscopic state---defined by the ensemble of static configurations explored by the system tap after tap---for a given tap intensity and duration is studied in terms of volume, V, and force moment tensor, Σ. In a previous paper [Pugna…
▽ More
We prepare static granular beds under gravity in different stationary states by tapping the system with pulsed excitations of controlled amplitude and duration. The macroscopic state---defined by the ensemble of static configurations explored by the system tap after tap---for a given tap intensity and duration is studied in terms of volume, V, and force moment tensor, Σ. In a previous paper [Pugnaloni et al., Phys. Rev. E 82, 050301(R) (2010)], we reported evidence supporting that such macroscopic states cannot be fully described by using only V or Σ, apart from the number of particles N. In this work, we present an analysis of the fluctuations of these variables that indicates that V and Σmay be sufficient to define the macroscopic states. Moreover, we show that only one of the invariants of Σis necessary, since each component of Σfalls onto a master curve when plotted as a function of Tr(Σ). This implies that these granular assemblies have a common shape for the stress tensor, even though it does not correspond to the hydrostatic type. Although most results are obtained by molecular dynamics simulations, we present supporting experimental results.
△ Less
Submitted 7 September, 2011; v1 submitted 24 May, 2011;
originally announced May 2011.
-
Effective mass overshoot in single degree of freedom mechanical systems with a particle damper
Authors:
Martín Sánchez,
Luis A. Pugnaloni
Abstract:
We study the response of a single degree of freedom mechanical system composed of a primary mass, M, a linear spring, a viscous damper and a particle damper. The particle damper consists in a prismatic enclosure of variable height that contains spherical grains (total mass m_p). Contrary to what it has been discussed in previous experimental and simulation studies, we show that, for small containe…
▽ More
We study the response of a single degree of freedom mechanical system composed of a primary mass, M, a linear spring, a viscous damper and a particle damper. The particle damper consists in a prismatic enclosure of variable height that contains spherical grains (total mass m_p). Contrary to what it has been discussed in previous experimental and simulation studies, we show that, for small containers, the system does not approach the fully detuned mass limit in a monotonous way. Rather, the system increases its effective mass up and above M+m_p before reaching this expected limiting value (which is associated with the immobilization of the particles due to a very restrictive container). Moreover, we show that a similar effect appears in the tall container limit where the system reaches effective masses below the expected asymptotic value M. We present a discussion on the origin of these overshoot responses and the consequences for industrial applications.
△ Less
Submitted 8 September, 2011; v1 submitted 2 May, 2011;
originally announced May 2011.
-
Steady state of tapped granular polygons
Authors:
Carlos M. Carlevaro,
Luis A. Pugnaloni
Abstract:
The steady state packing fraction of a tapped granular bed is studied for different grain shapes via a discrete element method. Grains are monosized regular polygons, from triangles to icosagons. Comparisons with disk packings show that the steady state packing fraction as a function of the tapping intensity presents the same general trends in polygon packings. However, better packing fractions ar…
▽ More
The steady state packing fraction of a tapped granular bed is studied for different grain shapes via a discrete element method. Grains are monosized regular polygons, from triangles to icosagons. Comparisons with disk packings show that the steady state packing fraction as a function of the tapping intensity presents the same general trends in polygon packings. However, better packing fractions are obtained, as expected, for shapes that can tessellate the plane (triangles, squares and hexagons). In addition, we find a sharp transition for packings of polygons with more than 13 vertices signaled by a discontinuity in the packing fraction at a particular tapping intensity. Density fluctuations for most shapes are consistent with recent experimental findings in disk packing; however, a peculiar behavior is found for triangles and squares.
△ Less
Submitted 19 October, 2010;
originally announced October 2010.
-
The shape of jamming arches in two-dimensional deposits of granular materials
Authors:
Angel Garcimartin,
Iker Zuriguel,
Luis A. Pugnaloni,
Alvaro Janda
Abstract:
We present experimental results on the shape of arches that block the outlet of a two dimensional silo. For a range of outlet sizes, we measure some properties of the arches such as the number of particles involved, the span, the aspect ratio, and the angles between mutually stabilizing particles. These measurements shed light on the role of frictional tangential forces in arching. In addition, we…
▽ More
We present experimental results on the shape of arches that block the outlet of a two dimensional silo. For a range of outlet sizes, we measure some properties of the arches such as the number of particles involved, the span, the aspect ratio, and the angles between mutually stabilizing particles. These measurements shed light on the role of frictional tangential forces in arching. In addition, we find that arches tend to adopt an aspect ratio (the quotient between height and half the span) close to one, suggesting an isotropic load. The comparison of the experimental results with data from numerical models of the arches formed in the bulk of a granular column reveals the similarities of both, as well as some limitations in the few existing models.
△ Less
Submitted 21 July, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
Pressure independence of granular flow through an aperture
Authors:
Maria Alejandra Aguirre,
Juan G. Grande,
Adriana Calvo,
Luis A. Pugnaloni,
Jean-Christophe Géminard
Abstract:
We experimentally demonstrate that the flow rate of granular material through an aperture is controlled by the exit velocity imposed to the particles and not by the pressure at the base, contrary to what is often assumed in previous works. This result is achieved by studying the discharge process of a dense packing of monosized disks through an orifice. The flow is driven by a conveyor belt. This…
▽ More
We experimentally demonstrate that the flow rate of granular material through an aperture is controlled by the exit velocity imposed to the particles and not by the pressure at the base, contrary to what is often assumed in previous works. This result is achieved by studying the discharge process of a dense packing of monosized disks through an orifice. The flow is driven by a conveyor belt. This two-dimensional horizontal setup allows to uncouple pressure and velocity and, therefore, to independently control the velocity at which the disks escape the horizontal silo and the pressure in the vicinity of the aperture. The flow rate is found to be directly proportional to the belt velocity, independent of the amount of disks in the container and, thus, independent of the pressure in the outlet region. In addition, this specific experimental configuration makes it possible to get information on the system dynamics from a single image of the disks that rest on the conveyor belt after the discharge.
△ Less
Submitted 17 May, 2010;
originally announced May 2010.
-
High intensity tapping regime in a frustrated lattice gas model of granular compaction
Authors:
Paula A. Gago,
Nicolás E. Bueno,
Luis A. Pugnaloni
Abstract:
In the frame of a well established lattice gas model for granular compaction, we investigate the high intensity tapping regime where a pile expands significantly during external excitation. We find that this model shows the same general trends as more sophisticated models based on molecular dynamic type simulations. In particular, a minimum in packing fraction as a function of tapping strength i…
▽ More
In the frame of a well established lattice gas model for granular compaction, we investigate the high intensity tapping regime where a pile expands significantly during external excitation. We find that this model shows the same general trends as more sophisticated models based on molecular dynamic type simulations. In particular, a minimum in packing fraction as a function of tapping strength is observed in the reversible branch of an annealed tapping protocol.
△ Less
Submitted 17 February, 2010;
originally announced February 2010.
-
Towards a relevant set of state variables to describe static granular packings
Authors:
Luis A. Pugnaloni,
Iván Sánchez,
Paula A. Gago,
José Damas,
Iker Zuriguel,
Diego Maza
Abstract:
We analyze, experimentally and numerically, the steady states, obtained by tapping, of a 2D granular layer. Contrary to the usual assumption, we show that the reversible (steady state branch) of the density--acceleration curve is nonmonotonous. Accordingly, steady states with the same mean volume can be reached by tapping the system with very different intensities. Simulations of dissipative frict…
▽ More
We analyze, experimentally and numerically, the steady states, obtained by tapping, of a 2D granular layer. Contrary to the usual assumption, we show that the reversible (steady state branch) of the density--acceleration curve is nonmonotonous. Accordingly, steady states with the same mean volume can be reached by tapping the system with very different intensities. Simulations of dissipative frictional disks show that equal volume steady states have different values of the force moment tensor. Additionally, we find that steady states of equal stress can be obtained by changing the duration of the taps; however, these states present distinct mean volumes. These results confirm previous speculations that the volume and the force moment tensor are both needed to describe univocally equilibrium states in static granular assemblies.
△ Less
Submitted 17 November, 2010; v1 submitted 17 February, 2010;
originally announced February 2010.
-
Role of vibrations in the jamming and unjamming of grains discharging from a silo
Authors:
Cristian Mankoc,
Angel Garcimartin,
Iker Zuriguel,
Diego Maza,
Luis A. Pugnaloni
Abstract:
We present experimental results of the jamming of non-cohesive particles discharged from a flat bottomed silo subjected to vertical vibration. When the exit orifice is only a few grain diameter wide, the flow can be arrested due to the formation of blocking arches. Hence, an external excitation is needed to resume the flow. The use of a continuous gentle vibration is a usual technique to ease th…
▽ More
We present experimental results of the jamming of non-cohesive particles discharged from a flat bottomed silo subjected to vertical vibration. When the exit orifice is only a few grain diameter wide, the flow can be arrested due to the formation of blocking arches. Hence, an external excitation is needed to resume the flow. The use of a continuous gentle vibration is a usual technique to ease the flow in such situations. Even though jamming is less frequent, it is still an issue in vibrated silos. There are, in principle, two possible mechanisms through which vibrations may facilitate the flow: (i) a decrease in the probability of the formation of blocking arches, and (ii) the breakage of blocking arches once they have been formed. By measuring the time intervals inside an avalanche during which no particles flow through the outlet, we are able to estimate the probability of breaking a blocking arch by vibrations. The result agrees with the prediction of a bivariate probabilistic model in which the formation of blocking arches is equally probable in vibrated and non-vibrated silos. This indicates that the second aforementioned mechanism is the main responsible for improving the flowability in gently vibrated silos.
△ Less
Submitted 28 July, 2009;
originally announced July 2009.
-
Nonmonotonic reversible branch in four model granular beds subjected to vertical vibration
Authors:
Luis A. Pugnaloni,
Martin Mizrahi,
Carlos M. Carlevaro,
Fernando Vericat
Abstract:
We present results from four independent models of a granular assembly subjected to tapping. We find that the steady-state packing fraction as a function of the tapping intensity is nonmonotonic. In particular, for high tapping intensities, we observe an increase of the packing fraction with tapping strength. This finding challenges the current understanding of compaction of granular media since…
▽ More
We present results from four independent models of a granular assembly subjected to tapping. We find that the steady-state packing fraction as a function of the tapping intensity is nonmonotonic. In particular, for high tapping intensities, we observe an increase of the packing fraction with tapping strength. This finding challenges the current understanding of compaction of granular media since the steady-state packing fraction is believed to decrease monotonically with increasing tapping intensity. We propose an explanation of our results based on the properties of the arches formed by the particles.
△ Less
Submitted 17 February, 2010; v1 submitted 7 March, 2008;
originally announced March 2008.
-
Pentagon deposits unpack under gentle tapping
Authors:
Ana M. Vidales,
Luis A. Pugnaloni,
Irene Ippolito
Abstract:
We present results from simulations of regular pentagons arranged in a rectangular die. The particles are subjected to vertical tapping. We study the behavior of the packing fraction, number of contacts and arch distributions as a function of the tapping amplitude. Pentagons show peculiar features as compared with disks. As a general rule, pentagons tend to form less arches than disks. Neverthel…
▽ More
We present results from simulations of regular pentagons arranged in a rectangular die. The particles are subjected to vertical tapping. We study the behavior of the packing fraction, number of contacts and arch distributions as a function of the tapping amplitude. Pentagons show peculiar features as compared with disks. As a general rule, pentagons tend to form less arches than disks. Nevertheless, as the tapping amplitude is decreased, the typical size of the pentagon arches grows significantly. As a consequence, a pentagon packing reduces its packing fraction when tapped gently in contrast with the behavior found in rounded particle deposits.
△ Less
Submitted 8 October, 2007;
originally announced October 2007.
-
Cluster pair correlation function of simple fluids: energetic connectivity criteria
Authors:
Luis A. Pugnaloni,
Guillermo J. Zarragoicoechea,
Fernando Vericat
Abstract:
We consider the clustering of Lennard-Jones particles by using an energetic connectivity criterion proposed long ago by T.L. Hill [J. Chem. Phys. 32, 617 (1955)] for the bond between pairs of particles. The criterion establishes that two particles are bonded (directly connected) if their relative kinetic energy is less than minus their relative potential energy. Thus, in general, it depends on t…
▽ More
We consider the clustering of Lennard-Jones particles by using an energetic connectivity criterion proposed long ago by T.L. Hill [J. Chem. Phys. 32, 617 (1955)] for the bond between pairs of particles. The criterion establishes that two particles are bonded (directly connected) if their relative kinetic energy is less than minus their relative potential energy. Thus, in general, it depends on the direction as well as on the magnitude of the velocities and positions of the particles. An integral equation for the pair connectedness function, proposed by two of the authors [Phys Rev. E 61, R6067 (2000)], is solved for this criterion and the results are compared with those obtained from molecular dynamics simulations and from a connectedness Percus-Yevick like integral equation for a velocity-averaged version of Hill's energetic criterion.
△ Less
Submitted 11 October, 2006;
originally announced October 2006.
-
Identification of arches in 2D granular packings
Authors:
Roberto Arevalo,
Luis A. Pugnaloni,
Diego Maza
Abstract:
We identify arches in a bed of granular disks generated by a molecular dynamic-type simulation. We use the history of the deposition of the particles to identify the supporting contacts of each particle. Then, arches are defined as sets of mutually stable disks. Different packings generated through tapping are analyzed. The possibility of identifying arches from the static structure of a deposit…
▽ More
We identify arches in a bed of granular disks generated by a molecular dynamic-type simulation. We use the history of the deposition of the particles to identify the supporting contacts of each particle. Then, arches are defined as sets of mutually stable disks. Different packings generated through tapping are analyzed. The possibility of identifying arches from the static structure of a deposited bed, without any information on the history of the deposition, is discussed.
△ Less
Submitted 14 July, 2006; v1 submitted 29 March, 2006;
originally announced March 2006.
-
Arching in tapped deposits of hard disks
Authors:
Luis A. Pugnaloni,
Marcos G. Valluzzi,
Lucas G. Valluzzi
Abstract:
We simulate the tapping of a bed of hard disks in a rectangular box by using a pseudo dynamic algorithm. In these simulations, arches are unambiguously defined and we can analyze their properties as a function of the tapping amplitud. We find that an order--disorder transition occurs within a narrow range of tapping amplitudes as it has been seen by others. Arches are always present in the syste…
▽ More
We simulate the tapping of a bed of hard disks in a rectangular box by using a pseudo dynamic algorithm. In these simulations, arches are unambiguously defined and we can analyze their properties as a function of the tapping amplitud. We find that an order--disorder transition occurs within a narrow range of tapping amplitudes as it has been seen by others. Arches are always present in the system althought they exhibit regular shapes in the ordered regime. Interestingly, an increase in the number of arches does not always correspond to a reduction in the packing fraction. This is in contrast with what is found in three-dimensional systems.
△ Less
Submitted 9 January, 2006;
originally announced January 2006.
-
Continuum percolation and the liquid-solid coexistence line of simple fluids
Authors:
Luis A. Pugnaloni,
Marcos G. Valluzzi,
Fernando Vericat
Abstract:
We compare the percolation loci for chemical clusters with the liquid-solid transition in the temperature-density phase diagram. Chemical clusters are defined as sets of particles connected through particle-particle bonds that last for a given time tau. By using molecular dynamics simulations of a Lennard-Jones system we obtain the percolation loci at different values of tau as the lines in the…
▽ More
We compare the percolation loci for chemical clusters with the liquid-solid transition in the temperature-density phase diagram. Chemical clusters are defined as sets of particles connected through particle-particle bonds that last for a given time tau. By using molecular dynamics simulations of a Lennard-Jones system we obtain the percolation loci at different values of tau as the lines in the temperature-density plane at which the system presents a spanning cluster in 50 percent of the configurations. We find that the percolation loci for chemical clusters shifts rapidly towards high densities as tau is increased. For moderate values of tau this line coincides with the low-density branch of the liquid-solid coexistence curve. This implies that no stable chemical clusters can be found in the fluid phase. In contrast, the percolation loci for physical clusters -sets of particles that remain close together at every instant for a given period tau- tends to a limiting line, as tau tends to infinity, which is far from the liquid-solid transition line.
△ Less
Submitted 10 May, 2005;
originally announced May 2005.
-
Jamming during the discharge of granular matter from a silo
Authors:
Iker Zuriguel,
Angel Garcimartín,
Diego Maza,
Luis A. Pugnaloni,
J. M. Pastor
Abstract:
In this work we present an experimental study of the jamming that stops the free flow of grains from a silo discharging by gravity. When the outlet size is not much bigger than the beads, granular material jams the outlet of the container due to the formation of an arch. Statistical data from the number of grains fallen between consecutive jams are presented. The information that they provide ca…
▽ More
In this work we present an experimental study of the jamming that stops the free flow of grains from a silo discharging by gravity. When the outlet size is not much bigger than the beads, granular material jams the outlet of the container due to the formation of an arch. Statistical data from the number of grains fallen between consecutive jams are presented. The information that they provide can help to understand the jamming phenomenon. As the ratio between the size of the orifice and the size of the beads is increased, the probability that an arch blocks the outlet decreases. We show here that there is a power law divergence of the mean avalanche size for a finite critical radius. Beyond this critical radius no jamming can occur and the flow is never stopped. The dependence of the arch formation on the shape and the material of the grains has been explored. It has been found that the material properties of the grains do not affect the arch formation probability. On the contrary, the shape of the grains deeply influences it. A simple model to interpret the results is also discussed.
△ Less
Submitted 8 March, 2005; v1 submitted 29 July, 2004;
originally announced July 2004.
-
On the relationship between rheology and percolation in the gelation of weakly attractive colloids: Beyond "snapshot" percolation
Authors:
Luis A. Pugnaloni
Abstract:
A discussion on the viscoelastic properties of weakly attractive colloids and the relation to a newly developed percolation theory is presented. The need for taking into account the particle-particle bond lifetime in order to compare rheological and percolation estimates of the sol-gel transition is stressed. Recent molecular dynamics simulations and generalised percolation theory that use a bon…
▽ More
A discussion on the viscoelastic properties of weakly attractive colloids and the relation to a newly developed percolation theory is presented. The need for taking into account the particle-particle bond lifetime in order to compare rheological and percolation estimates of the sol-gel transition is stressed. Recent molecular dynamics simulations and generalised percolation theory that use a bond lifetime criterion in the definition of aggregates show that the percolation transition can be reconciled with the rheological sol-gel transition. The percolation concept is used here as a "measuring" tool to assess the viscoelastic behaviour of the system.
△ Less
Submitted 29 June, 2004;
originally announced June 2004.
-
Structure and distribution of arches in shaken hard sphere deposits
Authors:
Luis A. Pugnaloni,
G. C. Barker
Abstract:
We investigate the structure and distribution of arches formed by spherical, hard particles shaken in an external field after they come to rest. Arches (or bridges) are formed during a computer-simulated, non-sequential deposition of the spheres after each shaking cycle. We identify these arches by means of a connectivity criterion and study their structural characteristics and spatial distribut…
▽ More
We investigate the structure and distribution of arches formed by spherical, hard particles shaken in an external field after they come to rest. Arches (or bridges) are formed during a computer-simulated, non-sequential deposition of the spheres after each shaking cycle. We identify these arches by means of a connectivity criterion and study their structural characteristics and spatial distribution. We find that neither the size distribution nor the shape of the arches is strongly affected by the packing fraction of the deposit. Conversely, the spatial distribution and orientation of the bridges do depend on the volume fraction occupied by the spheres.
△ Less
Submitted 3 February, 2004; v1 submitted 18 July, 2003;
originally announced July 2003.
-
Jamming During the Discharge of Grains from a Silo Described as a Percolating Transition
Authors:
Iker Zuriguel,
Luis A. Pugnaloni,
Angel Garcimartin,
Diego Maza
Abstract:
We have looked into an experiment that has been termed the ``canonical example'' of jamming: granular material, clogging the outlet of a container as it is discharged by gravity. We present quantitative data of such an experiment. The experimental control parameter is the ratio between the radius of the orifice and the radius of the beads. As this parameter is increased, the jamming probability…
▽ More
We have looked into an experiment that has been termed the ``canonical example'' of jamming: granular material, clogging the outlet of a container as it is discharged by gravity. We present quantitative data of such an experiment. The experimental control parameter is the ratio between the radius of the orifice and the radius of the beads. As this parameter is increased, the jamming probability decreases. However, in the range of parameters explored, no evidence of criticality --in the sense of a jamming probability that becomes infinitely small for a finite radius-- has been found. We draw instead a comparison with a simple model that captures the main features of the phenomenon, namely, percolation in one dimension. The model gives indeed a phase transition, albeit a special one.
△ Less
Submitted 30 July, 2003; v1 submitted 1 January, 2003;
originally announced January 2003.
-
Continuum percolation of simple fluids: Energetic connectivity criteria
Authors:
Luis A. Pugnaloni,
Ileana F. Marquez,
Fernando Vericat
Abstract:
During the last few years, a number of works in computer simulation have focused on the clustering and percolation properties of simple fluids based in an energetic connectivity criterion proposed long ago by T.L. Hill [J. Chem. Phys. 23, 617 (1955)]. This connectivity criterion appears to be the most appropriate in the study of gas-liquid phase transition. So far, integral equation theories hav…
▽ More
During the last few years, a number of works in computer simulation have focused on the clustering and percolation properties of simple fluids based in an energetic connectivity criterion proposed long ago by T.L. Hill [J. Chem. Phys. 23, 617 (1955)]. This connectivity criterion appears to be the most appropriate in the study of gas-liquid phase transition. So far, integral equation theories have relayed on a velocity-averaged version of this criterion. We show, by using molecular dynamics simulations, that this average strongly overestimates percolation densities in the Lennard-Jones fluid making unreliable any prediction based on it. Additionally, we use a recently developed integral equation theory [Phys. Rev. E 61, R6067 (2000)] to show how this velocity-average can be overcome.
△ Less
Submitted 23 September, 2002;
originally announced September 2002.
-
New criteria for cluster identification in continuum systems
Authors:
Luis A. Pugnaloni,
Fernando Vericat
Abstract:
Two new criteria, that involve the microscopic dynamics of the system, are proposed for the identification of clusters in continuum systems. The first one considers a residence time in the definition of the bond between pairs of particles, whereas the second one uses a life time in the definition of an aggregate. Because of the qualitative features of the clusters yielded by the criteria we call…
▽ More
Two new criteria, that involve the microscopic dynamics of the system, are proposed for the identification of clusters in continuum systems. The first one considers a residence time in the definition of the bond between pairs of particles, whereas the second one uses a life time in the definition of an aggregate. Because of the qualitative features of the clusters yielded by the criteria we call them chemical and physical clusters, respectively. Molecular dynamics results for a Lennard-Jones system and general connectivity theories are presented.
△ Less
Submitted 25 October, 2001; v1 submitted 24 October, 2001;
originally announced October 2001.
-
Multi-particle structures in non-sequentially reorganized hard sphere deposits
Authors:
Luis A. Pugnaloni,
G. C. Barker,
Anita Mehta
Abstract:
We have examined extended structures, bridges and arches, in computer generated, non-sequentially stabilized, hard sphere deposits. The bridges and arches have well defined distributions of sizes and shapes. The distribution functions reflect the contraints associated with hard particle packing and the details of the restructuring process. A subpopulation of string-like bridges has been identifi…
▽ More
We have examined extended structures, bridges and arches, in computer generated, non-sequentially stabilized, hard sphere deposits. The bridges and arches have well defined distributions of sizes and shapes. The distribution functions reflect the contraints associated with hard particle packing and the details of the restructuring process. A subpopulation of string-like bridges has been identified. Bridges are fundamental microstructural elements in real granular systems and their sizes and shapes dominate considerations of structural properties and flow instabilities such as jamming.
△ Less
Submitted 18 October, 2001;
originally announced October 2001.
