-
Mu2e-II: Muon to electron conversion with PIP-II
Authors:
K. Byrum,
S. Corrodi,
Y. Oksuzian,
P. Winter,
L. Xia,
A. W. J. Edmonds,
J. P. Miller,
J. Mott,
W. J. Marciano,
R. Szafron,
R. Bonventre,
D. N. Brown,
Yu. G. Kolomensky,
O. Ning,
V. Singh,
E. Prebys,
L. Borrel,
B. Echenard,
D. G. Hitlin,
C. Hu,
D. X. Lin,
S. Middleton,
F. C. Porter,
L. Zhang,
R. -Y. Zhu
, et al. (83 additional authors not shown)
Abstract:
An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for exa…
▽ More
An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for examining the process on additional target materials. Mu2e-II is a proposed upgrade to Mu2e, with at least an additional order of magnitude in sensitivity to the conversion rate over Mu2e. The approach and challenges for this proposal are summarized. Mu2e-II may be regarded as the next logical step in a continued high-intensity muon program at FNAL.
△ Less
Submitted 16 March, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Study of secondary neutron interactions with $^{232}$Th, $^{129}$I, and $^{127}$I nuclei with the uranium assembly "QUINTA" at 2, 4, and 8 GeV deuteron beams of the JINR Nuclotron accelerator
Authors:
J. Adam,
V. V. Chilap,
V. I. Furman,
M. G. Kadykov,
J. Khushvaktov,
V. S. Pronskikh,
A. A. Solnyshkin,
V. I. Stegailov,
M. Suchopar,
V. M. Tsoupko-Sitnikov,
S. I. Tyutyunnikov,
J. Vrzalova,
V. Wagner,
L. Zavorka
Abstract:
The natural uranium assembly, "QUINTA", was irradiated with 2, 4, and 8 GeV deuterons. The $^{232}$Th, $^{127}$I, and $^{129}$I samples have been exposed to secondary neutrons produced in the assembly at a 20-cm radial distance from the deuteron beam axis. The spectra of gamma rays emitted by the activated $^{232}$Th, $^{127}$I, and $^{129}$I samples have been analyzed and several tens of product…
▽ More
The natural uranium assembly, "QUINTA", was irradiated with 2, 4, and 8 GeV deuterons. The $^{232}$Th, $^{127}$I, and $^{129}$I samples have been exposed to secondary neutrons produced in the assembly at a 20-cm radial distance from the deuteron beam axis. The spectra of gamma rays emitted by the activated $^{232}$Th, $^{127}$I, and $^{129}$I samples have been analyzed and several tens of product nuclei have been identified. For each of those products, neutron-induced reaction rates have been determined. The transmutation power for the $^{129}$I samples is estimated. Experimental results were compared to those calculated with well-known stochastic and deterministic codes.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
Activation Products from Copper and Steel Samples Exposed to Showers Produced by 8 GeV Protons Lost in the Fermilab Main Injector Collimation System
Authors:
Bruce C. Brown,
Nikolai V. Mokhov,
Vitaly S. Pronskikh
Abstract:
In conjunction with efforts to predict residual radiation levels in the Fermilab Main Injector, measurements of residual radiation were correlated with the time history of losses. Detailed examination suggested that the list of radioactive isotopes used for fitting was incomplete. We will report on activation studies of magnet steel and copper samples which we irradiated adjacent to the Fermilab M…
▽ More
In conjunction with efforts to predict residual radiation levels in the Fermilab Main Injector, measurements of residual radiation were correlated with the time history of losses. Detailed examination suggested that the list of radioactive isotopes used for fitting was incomplete. We will report on activation studies of magnet steel and copper samples which we irradiated adjacent to the Fermilab Main Injector collimation system. Our results identified several additional radioactive isotopes of interest. The MARS15 studies using a simplified model are compared with measurements. The long half-life isotopes will grow in importance as operation stretches to a second decade and as loss rates rise. These studies allow us to predict limits on these concerns.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Beam-Induced Effects and Radiological Issues in High-Intensity High-Energy Fixed Target Experiments
Authors:
N. V. Mokhov,
S. R. Childress,
A. I. Drozhdin,
V. S. Pronskikh,
D. Reitzner,
I. S. Tropin,
K. Vaziri
Abstract:
The next generation of accelerators for Megawatt proton and heavy-ion beams moves us into a completely new domain of extreme specific energies of up to 0.1 MJ/g (Megajoule/gram) and specific power up to 1 TW/g (Terawatt/gram) in beam interactions with matter. This paper is focused on deleterious effects of controlled and uncontrolled impacts of high-intensity beams on components of beam-lines, tar…
▽ More
The next generation of accelerators for Megawatt proton and heavy-ion beams moves us into a completely new domain of extreme specific energies of up to 0.1 MJ/g (Megajoule/gram) and specific power up to 1 TW/g (Terawatt/gram) in beam interactions with matter. This paper is focused on deleterious effects of controlled and uncontrolled impacts of high-intensity beams on components of beam-lines, target stations, beam absorbers, shielding and environment. Two new experiments at Fermilab are taken as an example. The Long-Baseline Neutrino Experiment (LBNE) will explore the interactions and transformations of the world's highest-intensity neutrino beam by sending it from Fermilab more than 1,000 kilometers through the Earth's mantle to a large liquid argon detector. The Mu2e experiment is devoted to studies of the conversion of a negative muon to electron in the field of a nucleus without emission of neutrinos.
△ Less
Submitted 29 August, 2014;
originally announced September 2014.
-
MARS15 Code Developments Driven by the Intensity Frontier Needs
Authors:
N. V. Mokhov,
V. S. Pronskikh,
I. L. Rakhno,
S. I. Striganov,
I. S. Tropin,
Yu. I. Eidelman,
P. Aarnio,
K. K. Gudima,
A. Yu. Konobeev
Abstract:
The MARS15(2012) is the latest version of a multi-purpose Monte-Carlo code developed since 1974 for detailed simulation of hadronic and electromagnetic cascades in an arbitrary 3-D geometry of shielding, accelerator, detector and spacecraft components with energy ranging from a fraction of an electronvolt to 100 TeV. Driven by needs of the intensity frontier projects with their Megawatt beams, e.g…
▽ More
The MARS15(2012) is the latest version of a multi-purpose Monte-Carlo code developed since 1974 for detailed simulation of hadronic and electromagnetic cascades in an arbitrary 3-D geometry of shielding, accelerator, detector and spacecraft components with energy ranging from a fraction of an electronvolt to 100 TeV. Driven by needs of the intensity frontier projects with their Megawatt beams, e.g., ESS, FAIR and Project X, the code has been recently substantially improved and extended. These include inclusive and exclusive particle event generators in the 0.7 to 12 GeV energy range, proton inelastic interaction modeling below 20 MeV, implementation of the EGS5 code for electromagnetic shower simulation at energies from 1 keV to 20 MeV, stopping power description in compound materials, new module for DPA calculations for neutrons from a fraction of eV to 20-150 MeV, user-friendly DeTra-based method to calculate nuclide inventories, and new ROOT-based geometry.
△ Less
Submitted 29 August, 2014;
originally announced September 2014.
-
Energy Production Demonstrator for Megawatt Proton Beams
Authors:
Vitaly S. Pronskikh,
Nikolai Mokhov,
Igor Novitski,
Sergey I. Tyutyunnikov
Abstract:
A preliminary study of the Energy Production Demonstrator (EPD) concept - a solid heavy metal target irradiated by GeV-range intense proton beams and producing more energy than consuming - is carried out. Neutron production, fission, energy deposition, energy gain, testing volume and helium production are simulated with the MARS15 code for tungsten, thorium, and natural uranium targets in the prot…
▽ More
A preliminary study of the Energy Production Demonstrator (EPD) concept - a solid heavy metal target irradiated by GeV-range intense proton beams and producing more energy than consuming - is carried out. Neutron production, fission, energy deposition, energy gain, testing volume and helium production are simulated with the MARS15 code for tungsten, thorium, and natural uranium targets in the proton energy range 0.5 to 120 GeV. This study shows that the proton energy range of 2 to 4 GeV is optimal for both a natU EPD and the tungsten-based testing station that would be the most suitable for proton accelerator facilities. Conservative estimates, not including breeding and fission of plutonium, based on the simulations suggest that the proton beam current of 1 mA will be sufficient to produce 1 GW of thermal output power with the natU EPD while supplying < 8% of that power to operate the accelerator. The thermal analysis shows that the concept considered has a problem due to a possible core meltdown; however, a number of approaches (a beam rastering, in first place) are suggested to mitigate the issue. The efficiency of the considered EPD as a Materials Test Station (MTS) is also evaluated in this study.
△ Less
Submitted 16 July, 2014;
originally announced July 2014.
-
Project X: Physics Opportunities
Authors:
Andreas S. Kronfeld,
Robert S. Tschirhart,
Usama Al-Binni,
Wolfgang Altmannshofer,
Charles Ankenbrandt,
Kaladi Babu,
Sunanda Banerjee,
Matthew Bass,
Brian Batell,
David V. Baxter,
Zurab Berezhiani,
Marc Bergevin,
Robert Bernstein,
Sudeb Bhattacharya,
Mary Bishai,
Thomas Blum,
S. Alex Bogacz,
Stephen J. Brice,
Joachim Brod,
Alan Bross,
Michael Buchoff,
Thomas W. Burgess,
Marcela Carena,
Luis A. Castellanos,
Subhasis Chattopadhyay
, et al. (111 additional authors not shown)
Abstract:
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, had…
▽ More
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, hadron structure, hadron spectroscopy, and lattice-QCD calculations. Part 1 is available as arXiv:1306.5022 [physics.acc-ph] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph].
△ Less
Submitted 1 October, 2016; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Calculation of Residual Dose Around Small Objects Using Mu2e Target as an Example
Authors:
V. S. Pronskikh,
A. F. Leveling,
N. V. Mokhov,
I. L. Rakhno,
P. Aarnio
Abstract:
The MARS15 code provides contact residual dose rates for relatively large accelerator and experimental components for predefined irradiation and cooling times. The dose rate at particular distances from the components, some of which can be rather small in size, is calculated in a post Monte-Carlo stage via special algorithms described elsewhere. The approach is further developed and described in t…
▽ More
The MARS15 code provides contact residual dose rates for relatively large accelerator and experimental components for predefined irradiation and cooling times. The dose rate at particular distances from the components, some of which can be rather small in size, is calculated in a post Monte-Carlo stage via special algorithms described elsewhere. The approach is further developed and described in this paper.
△ Less
Submitted 1 May, 2012;
originally announced May 2012.
-
Radiation and thermal analysis of production solenoid for Mu2e experimental setup
Authors:
V. S. Pronskikh,
V. V. Kashikhin,
N. V. Mokhov
Abstract:
The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the p…
▽ More
The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the pion decay will be captured in the PS aperture and directed by an S-shaped Transport Solenoid towards the stopping target inside the Detector Solenoid. In order for the superconducting magnets to operate reliably and with a sufficient safety margin, the peak neutron flux entering the coils must be reduced by 3 orders of magnitude that is achieved by means of a sophisticated absorber placed in the magnet aperture. The proposed absorber, consisting of W- and Cu-based alloy parts, is optimized for the performance and cost. Results of MARS15 simulations of energy deposition and radiation are reported. The results of the PS magnet thermal analysis, coordinated with the coil cooling scheme, are reported as well for the selected absorber design.
△ Less
Submitted 17 February, 2012;
originally announced February 2012.
-
Optimization of a Mu2e production solenoid heat and radiation shield using MARS15
Authors:
V. S. Pronskikh,
N. V. Mokhov
Abstract:
A Monte-Carlo study of several Mu2e Production Solenoid (PS) absorber (heat shield) versions using the MARS15 code has been performed. Optimizations for material as well as cost (amount of tungsten) have been carried out. Studied are such quantities as the number of displacements per atom (DPA) in the helium-cooled solenoid superconducting coils, power density and dynamic heat load in various part…
▽ More
A Monte-Carlo study of several Mu2e Production Solenoid (PS) absorber (heat shield) versions using the MARS15 code has been performed. Optimizations for material as well as cost (amount of tungsten) have been carried out. Studied are such quantities as the number of displacements per atom (DPA) in the helium-cooled solenoid superconducting coils, power density and dynamic heat load in various parts of the PS and its surrounding structures. Prompt dose, residual dose, secondary particle flux are also simulated in the PS structures and the experimental hall. A preliminary choice of the PS absorber design is made on the ground of these studies.
△ Less
Submitted 17 February, 2012;
originally announced February 2012.
-
Recoil Studies in the Reaction of 12-C Ions with the Enriched Isotope 118-Sn
Authors:
A. R. Balabekyan,
A. S. Danagulyan,
J. R. Drnoyan,
N. A. Demekhina,
G. H. Hovhannisyan,
J. Adam,
V. G. Kalinnikov,
M. I. Krivopustov,
V. S. Pronskikh,
V. I. Stegailov,
A. A. Solnyshkin,
V. M. Tsoupko-Sitnikov,
S. G. Mashnik,
K. K. Gudima
Abstract:
The recoil properties of the product nuclei from the interaction of 2.2 GeV/nucleon 12-C ions from Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 118-Sn target have been studied using catcher foils. The experimental data were analyzed using the mathematical formalism of the standard two-step vector model. The results for 12-C ions…
▽ More
The recoil properties of the product nuclei from the interaction of 2.2 GeV/nucleon 12-C ions from Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 118-Sn target have been studied using catcher foils. The experimental data were analyzed using the mathematical formalism of the standard two-step vector model. The results for 12-C ions are compared with those for deuterons and protons. Three different Los Alamos versions of the Quark-Gluon String Model (LAQGSM) were used for comparison with our experimental data.
△ Less
Submitted 4 May, 2009;
originally announced May 2009.
-
Recoil Products from p+$^{118}Sn$ and d+$^{118}Sn$ at 3.65 GeV/A
Authors:
A. R. Balabekyan,
A. S. Danagulyan,
J. R. Drnoyan,
N. A. Demekhina,
G. H. Hovhannisyan,
J. Adam,
V. G. Kalinnikov,
M. I. Krivopustov,
V. S. Pronskikh,
V. I. Stegailov,
A. A. Solnyshkin,
P. Chaloun,
V. M. Tsoupko-Sitnikov,
S. G. Mashnik,
K. K. Gudima
Abstract:
The recoil properties of the product nuclei from the interaction of 3.65 GeV/nucleon protons and deuterons with $^{118}Sn$ target have been studied by the method of catching foils on the beams of LHE JINR.
The mathematical formalism of the standard two step vector model was used for the analysis of experimental results. The obtained results for the protons are compared with the ones obtained f…
▽ More
The recoil properties of the product nuclei from the interaction of 3.65 GeV/nucleon protons and deuterons with $^{118}Sn$ target have been studied by the method of catching foils on the beams of LHE JINR.
The mathematical formalism of the standard two step vector model was used for the analysis of experimental results. The obtained results for the protons are compared with the ones obtained for the deuterons. The total energy of the deuterons beam was 3.65GeV/nucleon. It is interesting to note that the forward velocity v and the recoil nuclei kinetic energy increases linearly with the increase of mass loss of target $ΔA$, but seems to change its slope at around $ΔA=60$. It seems that light and medium mass products are produced partly by a fragmentation mechanism.
△ Less
Submitted 17 May, 2006; v1 submitted 23 March, 2006;
originally announced March 2006.
-
Formation of Light Isotopes by Protons and Deuterons of 3.65 GeV/nucleon on Separated Tin Isotopes
Authors:
A. R. Balabekyan,
A. S. Danagulyan,
J. R. Drnoyan,
G. H. Hovhannisyan,
J. Adam,
V. G. Kalinnikov,
M. I. Krivopustov,
V. S. Pronskikh,
V. I. Stegailov,
A. A. Solnyshkin,
P. Chaloun,
V. M. Tsoupko-Sitnikov,
S. G. Mashnik,
K. K. Gudima
Abstract:
We measure cross sections for residual nuclide formation in the mass range 6 < A < 97 caused by bombardment with protons and deuterons of 3.65 GeV/nucleon energy of enriched tin isotopes (112-Sn, 118-Sn, 120-Sn, 124-Sn). The experimental data are compared with calculations by the codes FLUKA, LAHET, CEM03, and LAQGSM03. Scaling behavior is observed for the whole mass region of residual nuclei, s…
▽ More
We measure cross sections for residual nuclide formation in the mass range 6 < A < 97 caused by bombardment with protons and deuterons of 3.65 GeV/nucleon energy of enriched tin isotopes (112-Sn, 118-Sn, 120-Sn, 124-Sn). The experimental data are compared with calculations by the codes FLUKA, LAHET, CEM03, and LAQGSM03. Scaling behavior is observed for the whole mass region of residual nuclei, showing a possible multifragmentation mechanism for the formation of light products (6 < A < 31). Our analysis of the isoscaling dependence also shows a possible contribution of multifragmentation to the production of heavier nuclides, in the mass region 39 < A < 81.
△ Less
Submitted 22 June, 2005;
originally announced June 2005.
-
Investigation of proton-nuclear reactions on isotopes $^{129}$I, $^{237}$Np and $^{241}$Am at $E_p$ = 660 MeV
Authors:
V. S. Pronskikh
Abstract:
Cross sections of the residual nuclei production in $^{129}$I, $^{237}$Np and $^{241}$Am target irradiated by proton beam with energy 660 MeV are measured by means of activation analysis with the use of HPGe detectors. The number of product nuclei identified amounts to 74 for $^{129}$I target, 53 for $^{237}$Np target and 80 for $^{241}$Am target. Theoretical model analysis employing eleven cont…
▽ More
Cross sections of the residual nuclei production in $^{129}$I, $^{237}$Np and $^{241}$Am target irradiated by proton beam with energy 660 MeV are measured by means of activation analysis with the use of HPGe detectors. The number of product nuclei identified amounts to 74 for $^{129}$I target, 53 for $^{237}$Np target and 80 for $^{241}$Am target. Theoretical model analysis employing eleven contemporary computer models of hadron-nuclear interactions is performed. Insufficient for practical purposes precision of modelling of the reactions under study is demonstrated. Methods for short-lived beta-unstable reaction product identification are developed and amended, a program package for gamma-spectrometry data analysis is described.
△ Less
Submitted 26 March, 2005;
originally announced March 2005.
-
Analysis of the JINR p(660 MeV) + 129I, 237Np, and 241Am Measurements with Eleven Different Models
Authors:
S. G. Mashnik,
V. S. Pronskikh,
J. Adam,
A. Balabekyan,
V. S. Barashenkov,
V. P. Filinova,
A. A. Solnyshkin,
V. M. Tsoupko-Sitnikov,
R. Brandt,
R. Odoj,
A. J. Sierk,
R. E. Prael,
K. K. Gudima,
M. I. Baznat
Abstract:
We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2…
▽ More
We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. We found out that all these models have problems in a correct description of many of these cross sections, though some of these models describe very well most of the recent measurements done at GSI using inverse kinematics, as well as many other reactions. None of the tested here models is able to reproduce well all the JINR data and all of them should be further improved. Development of a better universal evaporation/fission model should be of a highest priority. We conclude that it is impossible to make a correct choice between fission and fragmentation reaction mechanisms analyzing only measurements on product cross sections; addressing this question would require analysis of two- or multi-particle correlation measurements.
△ Less
Submitted 27 July, 2004;
originally announced July 2004.
-
Study of Proton Induced Reactions in a Radioactive 129-I Target at Ep=660 MeV
Authors:
V. S. Pronskikh,
J. Adam,
A. R. Balabekyan,
V. S. Barashenkov,
V. P. Dzhelepov,
S. A. Gustov,
V. P. Filinova,
V. G. Kalinnikov,
M. I. Krivopustov,
I. V. Mirokhin,
A. A. Solnyshkin,
V. I. Stegailov,
V. M. Tsoupko-Sitnikov,
J. Mrazek,
R. Brandt,
W. Westmeier,
R. Odoj,
S. G. Mashnik,
A. J. Sierk,
R. E. Prael,
K. K. Gudima,
M. I. Baznat
Abstract:
Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA optio…
▽ More
Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA options), CASCADE, CEM95, CEM2K, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. Most of the models describe spallation products with masses close to the target reasonably well while the reliability of the codes differs greatly in the deep spallation and fission/fragmentation regions. The difficulties in describing products with A=40-80 by all of the codes tested here except for CEM2k+GEMINI and LAQGSM+GEMINI is related to the neglect of fission (and fragmentation) processes for targets as light as 129-I.
△ Less
Submitted 30 March, 2004;
originally announced March 2004.
