-
Boosting the efficiency of transient photoluminescence microscopy using cylindrical lenses
Authors:
Alvaro J. Magdaleno,
Mercy Cutler,
Jesse J. Suurmond,
Marc Meléndez,
Rafael Delgado-Buscalioni,
Michael Seitz,
Ferry Prins
Abstract:
Transient Photoluminescence Microscopy (TPLM) allows for the direct visualization of carrier transport in semiconductor materials with sub nanosecond and few nanometer resolution. The technique is based on measuring changes in the spatial distribution of a diffraction limited population of carriers using spatiotemporal detection of the radiative decay of the carriers. The spatial resolution of TPL…
▽ More
Transient Photoluminescence Microscopy (TPLM) allows for the direct visualization of carrier transport in semiconductor materials with sub nanosecond and few nanometer resolution. The technique is based on measuring changes in the spatial distribution of a diffraction limited population of carriers using spatiotemporal detection of the radiative decay of the carriers. The spatial resolution of TPLM is therefore primarily determined by the signal-to-noise-ratio (SNR). Here we present a method using cylindrical lenses to boost the signal acquisition in TPLM experiments. The resulting asymmetric magnification of the photoluminescence emission of the diffraction limited spot can increase the collection efficiency by more than a factor of 10, significantly reducing acquisition times and further boosting spatial resolution.
△ Less
Submitted 29 May, 2023;
originally announced May 2023.
-
Tackling Multimodal Device Distributions in Inverse Photonic Design using Invertible Neural Networks
Authors:
Michel Frising,
Jorge Bravo-Abad,
Ferry Prins
Abstract:
Inverse design, the process of matching a device or process parameters to exhibit a desired performance, is applied in many disciplines ranging from material design over chemical processes and to engineering. Machine learning has emerged as a promising approach to overcome current limitations imposed by the dimensionality of the parameter space and multimodal parameter distributions. Most traditio…
▽ More
Inverse design, the process of matching a device or process parameters to exhibit a desired performance, is applied in many disciplines ranging from material design over chemical processes and to engineering. Machine learning has emerged as a promising approach to overcome current limitations imposed by the dimensionality of the parameter space and multimodal parameter distributions. Most traditional optimization routines assume an invertible one-to-one mapping between the design parameters and the target performance. However, comparable or even identical performance may be realized by different designs, yielding a multimodal distribution of possible solutions to the inverse design problem which confuses the optimization algorithm. Here, we show how a generative modeling approach based on invertible neural networks can provide the full distribution of possible solutions to the inverse design problem and resolve the ambiguity of nanodevice inverse design problems featuring multimodal distributions. We implement a Conditional Invertible Neural Network (cINN) and apply it to a proof-of-principle nanophotonic problem, consisting in tailoring the transmission spectrum of a metallic film milled by subwavelength indentations. We compare our approach with the commonly used conditional Variational Autoencoder (cVAE) framework and show the superior flexibility and accuracy of the proposed cINNs when dealing with multimodal device distributions. Our work shows that invertible neural networks provide a valuable and versatile toolkit for advancing inverse design in nanoscience and nanotechnology.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Broadband-tunable spectral response of perovskite-on-paper photodetectors using halide mixing
Authors:
Alvaro J. Magdaleno,
Riccardo Frisenda,
Ferry Prins,
Andres Castellanos-Gomez
Abstract:
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In th…
▽ More
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. From the bandgap tunability of halide-mixed perovskites we create photodetectors with a cut-off spectral onset that ranges from the NIR to the green, by increasing the bromide content on MAPb(I$_{1-x}$Br$_x$)$_3$ perovskite alloys. The devices show a fast and efficient response. The best performances are observed for the pure I and Br perovskite compositions, with a maximum responsivity of 376 mA/W on the MAPbBr$_3$ device. This study provides an example of the wide range of possibilities that the combination of solution processable materials with paper substrates offer for the development of low-cost, biodegradable and easy-to-fabricate devices.
△ Less
Submitted 19 May, 2022;
originally announced May 2022.
-
Halide mixing inhibits exciton transport in two-dimensional perovskites despite phase purity
Authors:
Michael Seitz,
Marc Meléndez,
Peyton York,
Daniel A. Kurtz,
Alvaro J. Magdaleno,
Nerea Alcázar,
Mahesh K. Gangishetty,
Rafael Delgado-Buscalioni,
Daniel N. Congreve,
Ferry Prins
Abstract:
Metal-halide perovskites are a versatile material platform for light-harvesting and light-emitting applications as their variable chemical composition allows the optoelectronic properties to be tailored to specific applications. Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites across wide spectral ranges. However, halide mixing has common…
▽ More
Metal-halide perovskites are a versatile material platform for light-harvesting and light-emitting applications as their variable chemical composition allows the optoelectronic properties to be tailored to specific applications. Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites across wide spectral ranges. However, halide mixing has commonly been observed to result in phase segregation, which reduces excited-state transport and limits device performance. While the current emphasis lies on the development of strategies to prevent phase segregation, it remains unclear how halide mixing may affect excited-state transport even if phase purity is maintained. In this work, we study excitonic excited-state transport in phase pure mixed-halide 2D perovskites. Using transient photoluminescence microscopy, we show that, despite phase purity, halide mixing inhibits exciton transport in these materials. We find a significant reduction even for relatively low alloying concentrations, with bromide-rich perovskites being particularly sensitive to the introduction of iodide ions. Performing Brownian dynamics simulations, we are able to reproduce our experimental results and attribute the decrease in diffusivity to the energetically disordered potential landscape that arises due to the intrinsic random distribution of alloying sites. Our results suggest that even in the absence of phase segregation, halide mixing may still impact carrier transport due to the local intrinsic inhomogeneities in the energy landscape.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
A deep learning approach to resonant light transmission through single subwavelength apertures
Authors:
David Alonso-Gonzalez,
Michel Frising,
Ferry Prins,
Jorge Bravo-Abad
Abstract:
Resonant transmission of light is a surface-wave assisted phenomenon that enables funneling light through subwavelength apertures milled in otherwise opaque metallic screens. In this work, we introduce a deep learning approach to efficiently compute and design the optical response of a single subwavelength slit perforated in a metallic screen and surrounded by periodic arrangements of indentations…
▽ More
Resonant transmission of light is a surface-wave assisted phenomenon that enables funneling light through subwavelength apertures milled in otherwise opaque metallic screens. In this work, we introduce a deep learning approach to efficiently compute and design the optical response of a single subwavelength slit perforated in a metallic screen and surrounded by periodic arrangements of indentations. First, we show that a semi-analytical framework based on a coupled-mode theory formalism is a robust and efficient method to generate the large training datasets required in the proposed approach. Second, we discuss how simple, densely connected artificial neural networks can accurately learn the mapping from the geometrical parameters defining the topology of the system to its corresponding transmission spectrum. Finally, we report on a deep learning tandem architecture able to perform inverse design tasks for the considered class of systems. We expect this work to stimulate further work on the application of deep learning to the analysis of light-matter interaction in nanostructured metallic films.
△ Less
Submitted 20 June, 2021;
originally announced June 2021.
-
Mapping the Trap-State Landscape in 2D Metal-Halide Perovskites using Transient Photoluminescence Microscopy
Authors:
Michael Seitz,
Marc Meléndez,
Nerea Alcázar-Cano,
Daniel N. Congreve,
Rafael Delgado-Buscalioni,
Ferry Prins
Abstract:
Transient microscopy is of vital importance in understanding the dynamics of optical excited states in optoelectronic materials, as it allows for a direct visualization of the movement of energy carriers in space and time. Important information on the influence of trap-states can be obtained using this technique, typically observed as a slow-down of the energy transport as carriers are trapped at…
▽ More
Transient microscopy is of vital importance in understanding the dynamics of optical excited states in optoelectronic materials, as it allows for a direct visualization of the movement of energy carriers in space and time. Important information on the influence of trap-states can be obtained using this technique, typically observed as a slow-down of the energy transport as carriers are trapped at defect sites. To date, however, studies of the trap-state dynamics have been mostly limited to phenomenological descriptions of the early time-dynamics. In this report, we show how long-acquisition-time transient photoluminescence microscopy can be used to provide a detailed map of the trap-state landscape in 2D perovskites, in particular when used in combination with transient spectroscopy. We reveal anomalous spatial dynamics of excitons in 2D perovskites, which cannot be explained with existing models for trap limited exciton transport that only account for a single trap type. Instead, using a continuous diffusion model and performing Brownian dynamics simulations, we show that this behavior can be explained by accounting for a distinct distribution of traps in this material. Our results highlight the value of transient microscopy as a complementary tool to more common transient spectroscopy techniques in the characterization of the excited state dynamics in semiconductors.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Long-Term Stabilization of Two-Dimensional Perovskites by Encapsulation with Hexagonal Boron Nitride
Authors:
Michael Seitz,
Patricia Gant,
Andres Castellanos-Gomez,
Ferry Prins
Abstract:
Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2PbI4) two-dimensional perovskites under ambient conditions is studied using fluorescence, absorbance and fluorescence lifetime measurements. It is demonstrated that a long-term stability of two-dimensional perovskites can be achieved…
▽ More
Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2PbI4) two-dimensional perovskites under ambient conditions is studied using fluorescence, absorbance and fluorescence lifetime measurements. It is demonstrated that a long-term stability of two-dimensional perovskites can be achieved through the encapsulation with hexagonal boron nitride. While un-encapsulated perovskite flakes degrade within hours, the encapsulated perovskites are stable for at least three months. In addition, encapsulation considerably improves the stability under laser irradiation. The environmental stability, combined with the improved durability under illumination, is a critical ingredient for thorough spectroscopic studies of the intrinsic opto-electronic properties of this material platform.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
A system for the deterministic transfer of 2D materials under inert environmental conditions
Authors:
Patricia Gant,
Felix Carrascoso,
Qinghua Zhao,
Yu Kyoung Ryu,
Michael Seitz,
Ferry Prins,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes th…
▽ More
The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes that require the use of very thick gloves to operate within the chamber or the implementation of several motorized micro-manipulators. Here, we set up a deterministic transfer system for 2D materials within a gloveless anaerobic chamber. Unlike other setups based on over-pressurized gloveboxes, in our system the operator can manipulate the 2D materials within the chamber with bare hands. This experimental setup allows us to exfoliate 2D materials and to deterministically place them at a desired location with accuracy in a controlled O2-free and very low humidity (<2% RH) atmosphere. We illustrate the potential of this system to work with air-sensitive 2D materials by comparing the stability of black phosphorus and perovskite flakes inside and outside the anaerobic chamber.
△ Less
Submitted 14 February, 2020;
originally announced March 2020.
-
Exciton diffusion in two-dimensional metal-halide perovskites
Authors:
Michael Seitz,
Alvaro J. Magdaleno,
Nerea Alcázar-Cano,
Marc Meléndez,
Tim J. Lubbers,
Sanne W. Walraven,
Sahar Pakdel,
Elsa Prada,
Rafael Delgado-Buscalioni,
Ferry Prins
Abstract:
Two-dimensional perovskites, in which inorganic layers are stabilized by organic spacer molecules, are attracting increasing attention as a more robust analogue to the conventional three-dimensional metal-halide perovskites. However, reducing the perovskite dimensionality alters their optoelectronic properties dramatically, yielding excited states that are dominated by bound electron-hole pairs kn…
▽ More
Two-dimensional perovskites, in which inorganic layers are stabilized by organic spacer molecules, are attracting increasing attention as a more robust analogue to the conventional three-dimensional metal-halide perovskites. However, reducing the perovskite dimensionality alters their optoelectronic properties dramatically, yielding excited states that are dominated by bound electron-hole pairs known as excitons, rather than by free charge carriers common to their bulk counterparts. Despite the growing interest in two-dimensional perovskites for both light harvesting and light emitting applications, the full impact of the excitonic nature on their optoelectronic properties remains unclear, particularly regarding the spatial dynamics of the excitons within the two-dimensional (2D) plane. Here, we present direct measurements of in-plane exciton transport in single-crystalline layered perovskites. Using time-resolved fluorescence microscopy, we show that excitons undergo an initial fast, intrinsic normal diffusion through the crystalline plane, followed by a transition to a slower subdiffusive regime as excitons get trapped. Interestingly, the early intrinsic exciton diffusivity depends sensitively on the exact composition of the perovskite, such as the choice of organic spacer. We attribute these changes in exciton transport properties to strong exciton-phonon interactions and the formation of large exciton-polarons. Our findings provide a clear design strategy to optimize exciton transport in these systems.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Direct Patterning of Colloidal Quantum-Dot Thin Films for Enhanced and Spectrally Selective Out-Coupling of Emission
Authors:
Ferry Prins,
David K. Kim,
Jian Cui,
Eva De Leo,
Kevin M. McPeak,
David J. Norris
Abstract:
We report on a template-stripping method for the direct surface patterning of colloidal quantum-dot thin films to produce highly luminescent structures with feature sizes less than 100 nm. Through the careful design of high quality bulls-eye gratings we can produce strong directional beaming (10° divergence) with up to six-fold out-coupling enhancement of spontaneous emission in the surface-normal…
▽ More
We report on a template-stripping method for the direct surface patterning of colloidal quantum-dot thin films to produce highly luminescent structures with feature sizes less than 100 nm. Through the careful design of high quality bulls-eye gratings we can produce strong directional beaming (10° divergence) with up to six-fold out-coupling enhancement of spontaneous emission in the surface-normal direction. A transition to narrow single-mode lasing is observed in these same structures at thresholds as low as 120 μJ/cm2. Furthermore, making use of the size-tunable character of colloidal quantum dots, we demonstrate spectrally selective out-coupling of light from mixed quantum-dot films. Our results provide a straightforward route towards significantly improved optical properties of colloidal quantum-dot assemblies.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
How semiconductor nanoplatelets form
Authors:
Andreas Riedinger,
Florian D. Ott,
Aniket Mule,
Sergio Mazzotti,
Philippe N. Knuesel,
Stephan J. P. Kress,
Ferry Prins,
Steven C. Erwin,
David J. Norris
Abstract:
Colloidal nanoplatelets - quasi-two-dimensional sheets of semiconductor exhibiting efficient, spectrally pure fluorescence - form when liquid-phase syntheses of spherical quantum dots are modified. Despite intense interest in their properties, the mechanism behind their anisotropic shape and precise atomic-scale thickness remains unclear, and even counterintuitive when their crystal structure is i…
▽ More
Colloidal nanoplatelets - quasi-two-dimensional sheets of semiconductor exhibiting efficient, spectrally pure fluorescence - form when liquid-phase syntheses of spherical quantum dots are modified. Despite intense interest in their properties, the mechanism behind their anisotropic shape and precise atomic-scale thickness remains unclear, and even counterintuitive when their crystal structure is isotropic. One commonly accepted explanation is that nanoclusters nucleate within molecular templates and then fuse. Here, we test this mechanism for zincblende nanoplatelets and show that they form instead due to an intrinsic instability in growth kinetics. We synthesize CdSe and CdS1-xSex nanoplatelets in template- and solvent-free isotropic melts containing only cadmium carboxylate and chalcogen, a finding incompatible with previous explanations. Our model, based on theoretical results showing enhanced growth on narrow surface facets, rationalizes nanoplatelet formation and experimental dependencies on temperature, time, and carboxylate length. Such understanding should lead to improved syntheses, controlled growth on surfaces, and broader libraries of nanoplatelet materials.
△ Less
Submitted 22 September, 2016; v1 submitted 20 May, 2016;
originally announced May 2016.
-
Reduced dielectric screening and enhanced energy transfer in single and few-layer MoS2
Authors:
Ferry Prins,
Aaron J. Goodman,
William A. Tisdale
Abstract:
We report highly efficient non-radiative energy transfer from cadmium selenide (CdSe) quantum dots to monolayer and few-layer molybdenum disulfide (MoS2). The quenching of the donor quantum dot photoluminescence increases as the MoS2 flake thickness decreases, with the highest efficiency (>95%) observed for monolayer MoS2. This counterintuitive result arises from reduced dielectric screening in th…
▽ More
We report highly efficient non-radiative energy transfer from cadmium selenide (CdSe) quantum dots to monolayer and few-layer molybdenum disulfide (MoS2). The quenching of the donor quantum dot photoluminescence increases as the MoS2 flake thickness decreases, with the highest efficiency (>95%) observed for monolayer MoS2. This counterintuitive result arises from reduced dielectric screening in thin layer semiconductors having unusually large permittivity and a strong in-plane transition dipole moment, as found in MoS2. Excitonic energy transfer between a 0D emitter and a 2D absorber is fundamentally interesting and enables a wide range of applications including broadband optical down-conversion, optical detection, photovoltaic sensitization, and color shifting in light-emitting devices.
△ Less
Submitted 7 August, 2014;
originally announced August 2014.
-
Highly efficient, dual state emission from an organic semiconductor
Authors:
Sebastian Reineke,
Nico Seidler,
Shane R. Yost,
Ferry Prins,
William A. Tisdale,
Marc A. Baldo
Abstract:
We report highly efficient, simultaneous fluorescence and phosphorescence (74% yield) at room temperature from a single molecule ensemble of (BzP)PB dispersed into a polymer host. The slow phosphorescence (208 ms lifetime) is very efficient (50%) at room temperature and only possible because the non-radiative rate for the triplet state is extremely low. The ability of an organic molecule to functi…
▽ More
We report highly efficient, simultaneous fluorescence and phosphorescence (74% yield) at room temperature from a single molecule ensemble of (BzP)PB dispersed into a polymer host. The slow phosphorescence (208 ms lifetime) is very efficient (50%) at room temperature and only possible because the non-radiative rate for the triplet state is extremely low. The ability of an organic molecule to function as an efficient dual state emitter at room temperature is unusual and opens new fields of applications including the use as broadband down-conversion emitters, optical sensors and attenuators, exciton probes, and spin-independent intermediates for Förster resonant energy transfer.
△ Less
Submitted 31 July, 2013;
originally announced August 2013.
-
Current-induced nanogap formation and graphitization in boron-doped diamond films
Authors:
V. Seshan,
C. R. Arroyo,
A. Castellanos-Gomez,
F. Prins,
M. L. Perrin,
S. D. Janssens,
K. Haenen,
M. Nesládek,
E. J. R. Sudhölter,
L. C. P. M. de Smet,
H. S. J. van der Zant,
D. Dulic
Abstract:
A high-current annealing technique is used to fabricate nanogaps and hybrid diamond/graphite structures in boron-doped nanocrystalline diamond films. Nanometer-sized gaps down to 1 nm are produced using a feedback-controlled current annealing procedure. The nanogaps are characterized using scanning electron microscopy and electronic transport measurements. The structural changes produced by the el…
▽ More
A high-current annealing technique is used to fabricate nanogaps and hybrid diamond/graphite structures in boron-doped nanocrystalline diamond films. Nanometer-sized gaps down to 1 nm are produced using a feedback-controlled current annealing procedure. The nanogaps are characterized using scanning electron microscopy and electronic transport measurements. The structural changes produced by the elevated temperature, achieved by Joule heating during current annealing, are characterized using Raman spectroscopy. The formation of hybridized diamond/graphite structure is observed at the point of maximum heat accumulation.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
Fast and efficient photodetection in nanoscale quantum-dot junctions
Authors:
Ferry Prins,
Michele Buscema,
Johannes S. Seldenthuis,
Samir Etaki,
Gilles Buchs,
Maria Barkelid,
Val Zwiller,
Yunan Gao,
Arjan J. Houtepen,
Laurens D. A. Siebbeles,
Herre S. J. van der Zant
Abstract:
We report on a photodetector in which colloidal quantum-dots directly bridge nanometer-spaced electrodes. Unlike in conventional quantum-dot thin film photodetectors, charge mobility no longer plays a role in our quantum-dot junctions as charge extraction requires only two individual tunnel events. We find an efficient photoconductive gain mechanism with external quantum-efficiencies of 38 electro…
▽ More
We report on a photodetector in which colloidal quantum-dots directly bridge nanometer-spaced electrodes. Unlike in conventional quantum-dot thin film photodetectors, charge mobility no longer plays a role in our quantum-dot junctions as charge extraction requires only two individual tunnel events. We find an efficient photoconductive gain mechanism with external quantum-efficiencies of 38 electrons-per-photon in combination with response times faster than 300 ns. This compact device-architecture may open up new routes for improved photodetector performance in which efficiency and bandwidth do not go at the cost of one another.
△ Less
Submitted 2 November, 2012;
originally announced November 2012.
-
Room-temperature gating of molecular junctions using few-layer graphene nanogap electrodes
Authors:
Ferry Prins,
Amelia Barreiro,
Justus W. Ruitenberg,
Johannes S. Seldenthuis,
Nuria Aliaga-Alcalde,
Lieven M. K. Vandersypen,
Herre S. J. van der Zant
Abstract:
We report on a method to fabricate and measure gateable molecular junctions which are stable at room temperature. The devices are made by depositing molecules inside a few-layer graphene nanogap, formed by feedback controlled electroburning. The gaps have separations on the order of 1-2 nm as estimated from a Simmons model for tunneling. The molecular junctions display gateable IV-characteristics…
▽ More
We report on a method to fabricate and measure gateable molecular junctions which are stable at room temperature. The devices are made by depositing molecules inside a few-layer graphene nanogap, formed by feedback controlled electroburning. The gaps have separations on the order of 1-2 nm as estimated from a Simmons model for tunneling. The molecular junctions display gateable IV-characteristics at room temperature.
△ Less
Submitted 7 February, 2012; v1 submitted 11 October, 2011;
originally announced October 2011.
-
Influence of chemical structure on the stability and the conductance of porphyrin single-molecule junctions
Authors:
Mickael L. Perrin,
Ferry Prins,
Christian A. Martin,
Ahson J. Shaikh,
Rienk Eelkema,
Jan H. van Esch,
Tomas Briza,
Robert Kaplanek,
Vladimir Kral,
Jan M. van Ruitenbeek,
Herre S. J. van der Zant,
Diana Dulić
Abstract:
Porphyrin molecules can form stable single molecule junctions without anchoring groups. Adding thiol end groups and pyridine axial groups yields more stable junctions with an increased spread in low-bias conductance. This is a result of different bridging geometries during breaking, the stability of which is demonstrated in time-dependent conductance measurements. This is in strong contrast with r…
▽ More
Porphyrin molecules can form stable single molecule junctions without anchoring groups. Adding thiol end groups and pyridine axial groups yields more stable junctions with an increased spread in low-bias conductance. This is a result of different bridging geometries during breaking, the stability of which is demonstrated in time-dependent conductance measurements. This is in strong contrast with rod like molecules which show one preferential binding geometry.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
Charge Transport in a Zn-Porphyrin single molecule junction
Authors:
Mickael L. Perrin,
Christian A. Martin,
Ferry Prins,
Ahson J. Shaikh,
Rienk Eelkema,
Jan H. van Esch,
Jan M. van Ruitenbeek,
Herre S. J. van der Zant,
Diana Dulić
Abstract:
We have investigated charge transport in ZnTPPdT-Pyr molecular junctions using the lithographic MCBJ technique at room temperature and cryogenic temperature (6K). We combined low-bias statistical measurements with spectroscopy of the molecular levels using I(V) characteristics. This combination allows us to characterize the transport in a molecular junction in detail. This complex molecule can for…
▽ More
We have investigated charge transport in ZnTPPdT-Pyr molecular junctions using the lithographic MCBJ technique at room temperature and cryogenic temperature (6K). We combined low-bias statistical measurements with spectroscopy of the molecular levels using I(V) characteristics. This combination allows us to characterize the transport in a molecular junction in detail. This complex molecule can form different junction configurations, which is observed in trace histograms and in current-voltage (I(V)) measurements. Both methods show that multiple stable single-molecule junction configurations can be obtained by modulating the inter-electrode distance. In addition we demonstrate that different ZnTPPdT-Pyr junction configurations can lead to completely different spectroscopic features with the same conductance values. We show that statistical low-bias conductance measurements should be interpreted with care, and that the combination with I(V) spectroscopy represents an essential tool for a more detailed characterization of the charge transport in a single molecule.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
An All-Electric Single-Molecule Motor
Authors:
Johannes S. Seldenthuis,
Ferry Prins,
Joseph M. Thijssen,
Herre S. J. van der Zant
Abstract:
Many types of molecular motors have been proposed and synthesized in recent years, displaying different kinds of motion, and fueled by different driving forces such as light, heat, or chemical reactions. We propose a new type of molecular motor based on electric field actuation and electric current detection of the rotational motion of a molecular dipole embedded in a three-terminal single-molecul…
▽ More
Many types of molecular motors have been proposed and synthesized in recent years, displaying different kinds of motion, and fueled by different driving forces such as light, heat, or chemical reactions. We propose a new type of molecular motor based on electric field actuation and electric current detection of the rotational motion of a molecular dipole embedded in a three-terminal single-molecule device. The key aspect of this all-electronic design is the conjugated backbone of the molecule, which simultaneously provides the potential landscape of the rotor orientation and a real-time measure of that orientation through the modulation of the conductivity. Using quantum chemistry calculations, we show that this approach provides full control over the speed and continuity of motion, thereby combining electrical and mechanical control at the molecular level over a wide range of temperatures. Moreover, chemistry can be used to change all key parameters of the device, enabling a variety of new experiments on molecular motors.
△ Less
Submitted 12 October, 2010;
originally announced October 2010.
-
Superconductivity: coherent "tunnelling" by a dielectric array of charge-carriers
Authors:
Johan F. Prins
Abstract:
Superconduction manifests when a steady-state current flows through a material without an electric field being present. It is argued here that the absence of scattering of the charge-carriers, although absolutely necessary, is not sufficient to explain why an electric field is zero when a current flows between two contacts to a superconducting material. It is concluded that an electric field, an…
▽ More
Superconduction manifests when a steady-state current flows through a material without an electric field being present. It is argued here that the absence of scattering of the charge-carriers, although absolutely necessary, is not sufficient to explain why an electric field is zero when a current flows between two contacts to a superconducting material. It is concluded that an electric field, and thus a resistance, must manifest unless (i) the charge-carriers form part of an array of dielectric charge centres, and (ii) the charge-carriers can increase their velocities without increasing their kinetic energies. A model is propoased which allows these requirements to manifest. The model is fitted to selected experimental results which have been published for low temperature metals, YBCO, and highly-doped p-type diamond. In each case a satisfactory description of the experimental results is demonstrated.
△ Less
Submitted 25 July, 2006;
originally announced July 2006.
-
Causality and relativity in quantum physics
Authors:
Johan F. Prins
Abstract:
It is argued here that the Copenhagen interpretation of quantum mechanics violates the tenets on which both Galileo's and Einstein's theories of relativity are based. It is postulated that the "building blocks" of the universe are not "particles" but are holistic wave-entitities which act and interact with other wave-entities as one would expect from waves. A new approach to model the free elect…
▽ More
It is argued here that the Copenhagen interpretation of quantum mechanics violates the tenets on which both Galileo's and Einstein's theories of relativity are based. It is postulated that the "building blocks" of the universe are not "particles" but are holistic wave-entitities which act and interact with other wave-entities as one would expect from waves. A new approach to model the free electron is presented. It is argued from Coulomb's law that the electromagnetic quantum-field energy is not part of an electric field surrounding the electron, but is localised, so that it is wholly equal to the mass of the electron. It is found that an energy component must also exist along a fourth spatial dimension which could be the origin of the "dark energy" in the universe and which, in turn, should be responsible for "vacuum-fluctuations" as governed by Heisenberg's uncertainty relationship for energy and time. The possible consequences of this approach are analysed and discussed.
△ Less
Submitted 24 July, 2006;
originally announced July 2006.
