Showing 1–3 of 3 results for author: Pinelli, D

Development of a High Rate Front-end ASIC for X-ray Spectroscopy and Diffraction Applications

Authors: Emerson Vernon, Gianluigi De Geronimo, Jonathan Baldwin, Wei Chen, Jack Fried, Gabriele Giacomini, Anthony Kuczewski, John Kuczewski, Joe Mead, Antonino Miceli, John S. Okasinski, Don Pinelli, Orlando Quaranta, Abdul K. Rumaiz, Peter Siddons, Graham Smith, Milutin Stanacevic, Russell Woods

Abstract: We developed a new front-end application specific integrated circuit (ASIC) for the upgrade of the Maia x-ray microprobe. The ASIC instruments 32 configurable front-end channels that perform either positive or negative charge amplification, pulse shaping, peak amplitude and time extraction along with buffered analog storage. At a gain of 3.6 V/fC, 1 $μ$s peaking time and a temperature of 248 K, an… ▽ More We developed a new front-end application specific integrated circuit (ASIC) for the upgrade of the Maia x-ray microprobe. The ASIC instruments 32 configurable front-end channels that perform either positive or negative charge amplification, pulse shaping, peak amplitude and time extraction along with buffered analog storage. At a gain of 3.6 V/fC, 1 $μ$s peaking time and a temperature of 248 K, an electronic resolution of 13- and 10 electrons rms was measured with and without a SDD sensor respectively. A spectral resolution of 170 eV FWHM at 5.9 keV was obtained with an $^{55}$Fe source. The channel linearity was better than $\pm$ 1 % with rate capabilities up to 40 kcps. The ASIC was fabricated in a commercial 250 nm process with a footprint of 6.3 mm x 3.9 mm and dissipates 167 mW of static power. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Front-end ASIC for Spectroscopic Readout of Virtual Frisch-Grid CZT Bar Sensors

Authors: Emerson Vernon, Gianluigi De Geronimo, Aleksey Bolotnikov, Milutin Stanacevic, Jack Fried, Luis Ocampo Giraldo, Kevin Wolniewicz, Kim Ackley, Cynthia Salwen, John Triolo, Don Pinelli, Kenny Luong

Abstract: Compact multi-channel radiation detectors rely on low noise front-end application specific integrated circuits (ASICs) to achieve high spectral resolution. Here, a new ASIC developed to readout virtual Frisch-grid cadmium zinc telluride (VFG CZT) detectors for gamma ray spectroscopy is presented. Corresponding to each ionizing event in the detector, the ASIC measures the amplitude and timing at th… ▽ More Compact multi-channel radiation detectors rely on low noise front-end application specific integrated circuits (ASICs) to achieve high spectral resolution. Here, a new ASIC developed to readout virtual Frisch-grid cadmium zinc telluride (VFG CZT) detectors for gamma ray spectroscopy is presented. Corresponding to each ionizing event in the detector, the ASIC measures the amplitude and timing at the anode, the cathode and four pad sense electrodes associated with each sensor in a detector array. The ASIC is comprised of 52 channels of which there are 4 cathode channels and 48 channels which can be configured as either anode channels with a baseline of 250 mV or pad sense channels to process induced signals with a baseline of 1.2 V. With a static power dissipation of 3 mW, each channel performs low-noise charge amplification, high-order shaping, peak and timing detection along with analog storage and multiplexing. The overall channel linearity was better than $\pm$ 1 % with timing resolution down to 700 ps for charges greater than 8 fC in the 3 MeV range. With a 4 x 4 array of 6 mm x 6 mm x 20 mm virtual Frisch-grid bar sensors connected and biased, an electronic resolution of $\approx$ 270 rms $e^{-}$ for charges up to 100 fC in the 3.2 MeV range was measured. Spectral measurements obtained with the 3D correction technique demonstrated resolutions of 1.8 % FWHM at 238 keV and 0.9 % FWHM at 662 keV. △ Less

Submitted 2 April, 2019; originally announced April 2019.

Comments: This article contains 36 pages and 16 figures. At the time of this submission, this work is not yet published. The document was submitted to Nuclear Instruments and Methods, Physics A

Multi-element Germanium Detectors for Synchrotron Applications

Authors: Abdul K. Rumaiz, Anthony J. Kuczewski, Joseph Mead, Emerson Vernon, Donald Pinelli, Eric Dooryhee, Sanjit Ghose, Thomas Caswell, D. Peter Siddons, Antonino Miceli, Jonathan Baldwin, Jonathan Almer, John Okasinski, Orlando Quaranta, Russell Woods, Thomas Krings, Stuart Stock

Abstract: We have developed a series of monolithic multi-element germanium detectors, based on sensor arrays produced by the Forschungzentrum Julich, and on Application-specific integrated circuits (ASICs) developed at Brookhaven. Devices have been made with element counts ranging from 64 to 384. These detectors are being used at NSLS-II and APS for a range of diffraction experiments, both monochromatic and… ▽ More We have developed a series of monolithic multi-element germanium detectors, based on sensor arrays produced by the Forschungzentrum Julich, and on Application-specific integrated circuits (ASICs) developed at Brookhaven. Devices have been made with element counts ranging from 64 to 384. These detectors are being used at NSLS-II and APS for a range of diffraction experiments, both monochromatic and energy-dispersive. Compact and powerful readout systems have been developed, based on the new generation of FPGA system-on-chip devices, which provide closely coupled multi-core processors embedded in large gate arrays. We will discuss the technical details of the systems, and present some of the results from them. △ Less

Submitted 23 April, 2018; originally announced April 2018.

Comments: 10 pages, 14 figures, Accepted J. Instrumentation