-
Emulsions in microfluidic channels with asymmetric boundary conditions and directional surface roughness: stress and rheology
Authors:
Francesca Pelusi,
Daniele Filippi,
Ladislav Derzsi,
Matteo Pierno,
Mauro Sbragaglia
Abstract:
The flow of emulsions in confined microfluidic channels is affected by surface roughness. Directional roughness effects have recently been reported in channels with asymmetric boundary conditions featuring a flat wall, and a wall textured with a directional roughness, the latter promoting a change in the velocity profiles when the flow direction of emulsions is inverted [D. Filippi et al., Adv. Ma…
▽ More
The flow of emulsions in confined microfluidic channels is affected by surface roughness. Directional roughness effects have recently been reported in channels with asymmetric boundary conditions featuring a flat wall, and a wall textured with a directional roughness, the latter promoting a change in the velocity profiles when the flow direction of emulsions is inverted [D. Filippi et al., Adv. Mater. Technol. 8, 2201748 (2023)]. An operative protocol is needed to reconstruct the stress profile inside the channel from velocity data to shed light on the trigger of the directional response. To this aim, we performed lattice Boltzmann numerical simulations of the flow of model emulsions with a minimalist model of directional roughness in two dimensions: a confined microfluidic channel with one flat wall and the other patterned by right-angle triangular-shaped posts. Simulations are essential to develop the protocol based on mechanical arguments to reconstruct stress profiles. Hence, one can analyze data to relate directional effects in velocity profiles to different rheological responses close to the rough walls associated with opposite flow directions. We finally show the universality of this protocol by applying it to other realizations of directional roughness by considering experimental data on emulsions in a microfluidic channel featured with a flat wall and a wall textured by herringbone-shaped roughness.
△ Less
Submitted 16 April, 2024; v1 submitted 29 December, 2023;
originally announced December 2023.
-
Highly sticky surfaces made by electrospun polymer nanofibers
Authors:
S. Varagnolo,
F. Raccanello,
M. Pierno,
G. Mistura,
M. Moffa,
L. Persano,
D. Pisignano
Abstract:
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops…
▽ More
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops upon changing the average fiber diameter up to the micrometer scale, fibers are found to exhibit unequalled water adhesion. Placed vertically, they can hold up water drops as large as 60 microL, more than twice the values typically obtained with hairy surfaces prepared by different methods. For aligned fibers with anisotropic wetting behavior, the maximum volume measured in the direction perpendicular to the fibers goes up to 90 μL. This work suggests new routes to tailor the wetting behavior on extended areas by nanofiber coatings, with possible applications in adsorbing and catalytic surfaces, microfluidic devices, and filtration technologies.
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
-
Fluidization and wall slip of soft-glassy materials by controlled surface roughness
Authors:
Ladislav Derzsi,
Daniele Filippi,
Giampaolo Mistura,
Matteo Pierno,
Matteo Lulli,
Mauro Sbragaglia,
Massimo Bernaschi,
Piotr Garstecki
Abstract:
The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced groo…
▽ More
The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced grooves oriented perpendicularly to the flow direction. We show that roughness-induced fluidization can be quantitatively tailored by systematically changing both the width and separation of the grooves. We find that a simple scaling law describes such fluidization as a function of the density of grooves, suggesting common scenarios for droplet trapping and release. Numerical simulations confirm these views and are used to elucidate the relation between fluidization and the rate of plastic rearrangements.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Droplet breakup driven by shear thinning solutions in a microfluidic T-Junction
Authors:
Enrico Chiarello,
Anupam Gupta,
Giampaolo Mistura,
Mauro Sbragaglia,
Matteo Pierno
Abstract:
Droplet-based microfluidics turned out to be an efficient and adjustable platform for digital analysis, encapsulation of cells, drug formulation, and polymerase chain reaction. Typically, for most biomedical applications, the handling of complex, non-Newtonian fluids is involved, e.g. synovial and salivary fluids, collagen, and gel scaffolds. In this study we investigate the problem of droplet for…
▽ More
Droplet-based microfluidics turned out to be an efficient and adjustable platform for digital analysis, encapsulation of cells, drug formulation, and polymerase chain reaction. Typically, for most biomedical applications, the handling of complex, non-Newtonian fluids is involved, e.g. synovial and salivary fluids, collagen, and gel scaffolds. In this study we investigate the problem of droplet formation occurring in a microfluidic T-shaped junction, when the continuous phase is made of shear thinning liquids. At first, we review in detail the breakup process providing extensive, side-by-side comparisons between Newtonian and non-Newtonian liquids over unexplored ranges of flow conditions and viscous responses. The non-Newtonian liquid carrying the droplets is made of Xanthan solutions, a stiff rod-like polysaccharide displaying a marked shear thinning rheology. By defining an effective Capillary number, a simple yet effective methodology is used to account for the shear-dependent viscous response occurring at the breakup. The droplet size can be predicted over a wide range of flow conditions simply by knowing the rheology of the bulk continuous phase. Experimental results are complemented with numerical simulations of purely shear thinning fluids using Lattice Boltzmann models. The good agreement between the experimental and numerical data confirm the validity of the proposed rescaling with the effective Capillary number.
△ Less
Submitted 27 January, 2018; v1 submitted 25 October, 2016;
originally announced October 2016.
-
Stretching of viscoelastic drops by steady sliding
Authors:
Silvia Varagnolo,
Daniele Filippi,
Giampaolo Mistura,
Matteo Pierno,
Mauro Sbragaglia
Abstract:
The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (P…
▽ More
The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (PAA) solutions of different molecular weights, suspended either in water or glycerol/water mixtures. In contrast to drops with stiff polymers, drops with flexible polymers exhibit a remarkable elongation in steady sliding. This difference is most likely attributed to different viscous bending as a consequence of different shear thinning. Moreover, an "optimal elasticity" of the polymer seems to be required for this drop elongation to be visible. We have complemented experimental results with numerical simulations of a viscoelastic FENE-P drop. This has been a decisive step to unravel how a change of the elastic parameters (e.g. polymer relaxation time, maximum extensibility) affects the dimensionless sliding velocity.
△ Less
Submitted 30 March, 2017; v1 submitted 6 October, 2016;
originally announced October 2016.
-
Single-file escape of colloidal particles from microfluidic channels
Authors:
Emanuele Locatelli,
Matteo Pierno,
Fulvio Baldovin,
Enzo Orlandini,
Yizhou Tan,
Stefano Pagliara
Abstract:
Single-file diffusion is a ubiquitous physical process exploited by living and synthetic systems to exchange molecules with their environment. It is paramount quantifying the escape time needed for single files of particles to exit from constraining synthetic channels and biological pores. This quantity depends on complex cooperative effects, whose predominance can only be established through a st…
▽ More
Single-file diffusion is a ubiquitous physical process exploited by living and synthetic systems to exchange molecules with their environment. It is paramount quantifying the escape time needed for single files of particles to exit from constraining synthetic channels and biological pores. This quantity depends on complex cooperative effects, whose predominance can only be established through a strict comparison between theory and experiments. By using colloidal particles, optical manipulation, microfluidics, digital microscopy and theoretical analysis we uncover the self-similar character of the escape process and provide closed-formula evaluations of the escape time. We find that the escape time scales inversely with the diffusion coefficient of the last particle to leave the channel. Importantly, we find that at the investigated {\bf microscale}, bias forces as tiny as $10^{-15}\;{\rm N}$ determine the magnitude of the escape time by drastically reducing interparticle collisions. Our findings provide crucial guidelines to optimize the design of micro- and nano-devices for a variety of applications including drug delivery, particle filtering and transport in geometrical constrictions.
△ Less
Submitted 21 July, 2016;
originally announced July 2016.
-
Deviation of viscous drops at chemical steps
Authors:
Ciro Semprebon,
Silvia Varagnolo,
Daniele Filippi,
Luca Perlini,
Matteo Pierno,
Martin Brinkmann,
Giampaolo Mistura
Abstract:
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a co…
▽ More
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a contact line mobility model showing that contact angle hysteresis dominates the dynamics at the step and determines whether the drop passes onto the lower substrate. This analysis is very well supported by the experimental dynamic phase diagram in terms of pinning, crossing, sliding and sliding followed by pinning.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Sliding droplets of Xanthan solutions: a joint experimental and numerical study
Authors:
Silvia Varagnolo,
Giampaolo Mistura,
Matteo Pierno,
Mauro Sbragaglia
Abstract:
We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-newtonian behavior, notably characterized by a shear-rate dependence of the viscosity. These experimental results are quantitatively compared with those of newtonian fluids (water). The impact of the non-newtonian behavior on the sliding process was shown through the relation…
▽ More
We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-newtonian behavior, notably characterized by a shear-rate dependence of the viscosity. These experimental results are quantitatively compared with those of newtonian fluids (water). The impact of the non-newtonian behavior on the sliding process was shown through the relation between the average dimensionless velocity (i.e. the Capillary number) and the dimensionless volume forces (i.e. the Bond number). To this aim, it is needed to define operative strategies to compute the Capillary number for the shear thinning fluids and compare with the corresponding newtonian case. Results from experiments were complemented with lattice Boltzmann numerical simulations of sliding droplets, aimed to disentangle the influence that non-newtonian flow properties have on the sliding.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
Frictional Transition from Superlubric Islands to Pinned Monolayers
Authors:
Matteo Pierno,
Lorenzo Bruschi,
Giampaolo Mistura,
Guido Paolicelli,
Alessandro di Bona,
Sergio Valeri,
Roberto Guerra,
Andrea Vanossi,
Erio Tosatti
Abstract:
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the…
▽ More
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the large size limit of naturally incommensurate Xe islands. Theory also predicts, as coverage approaches a full monolayer, an abrupt adhesion-driven 2D density compression of order several %, implying here a hysteretic jump from superlubric free islands to a pressurized commensurate immobile monolayer. This scenario is fully supported by QCM data showing remarkably large slip times at increasing submonolayer coverages, signaling superlubricity, followed by a dramatic drop to zero for the dense commensurate monolayer. Careful analysis of this variety of island sliding phenomena will be mandatory in future applications of friction of crystal-adsorbate interfaces.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Generation of water-in-oil and oil-in-water microdroplets in polyester-toner microfluidic devices
Authors:
Evandro Piccin,
Davide Ferraro,
Paolo Sartori,
Enrico Chiarello,
Matteo Pierno,
Giampaolo Mistura
Abstract:
This paper demonstrates that disposable polyester-toner microfluidic devices are suitable to produce either water-in-oil (W/O) or oil-in-water (O/W) droplets without using any surface treatment of the microchannels walls. Highly monodisperse W/O and O/W emulsions were generated in T-junction microdevices by simply adding appropriate surfactants to the continuous phase. The dispersion in size of dr…
▽ More
This paper demonstrates that disposable polyester-toner microfluidic devices are suitable to produce either water-in-oil (W/O) or oil-in-water (O/W) droplets without using any surface treatment of the microchannels walls. Highly monodisperse W/O and O/W emulsions were generated in T-junction microdevices by simply adding appropriate surfactants to the continuous phase. The dispersion in size of droplets generated at frequencies up to 500 Hz was always less than about 2% over time intervals of a couple of hours.
△ Less
Submitted 6 June, 2014;
originally announced June 2014.
-
Active Brownian Particles Escaping a Channel in Single File
Authors:
Emanuele Locatelli,
Fulvio Baldovin,
Enzo Orlandini,
Matteo Pierno
Abstract:
Active particles may happen to be confined in channels so narrow that they cannot overtake each other (Single File conditions). This interesting situation reveals nontrivial physical features as a consequence of the strong inter-particle correlations developed in collective rearrangements. We consider a minimal model for active Brownian particles with the aim of studying the modifications introduc…
▽ More
Active particles may happen to be confined in channels so narrow that they cannot overtake each other (Single File conditions). This interesting situation reveals nontrivial physical features as a consequence of the strong inter-particle correlations developed in collective rearrangements. We consider a minimal model for active Brownian particles with the aim of studying the modifications introduced by activity with respect to the classical (passive) Single File picture. Depending on whether their motion is dominated by translational or rotational diffusion, we find that active Brownian particles in Single File may arrange into clusters which are continuously merging and splitting ({\it active clusters}) or merely reproduce passive-motion paradigms, respectively. We show that activity convey to self-propelled particles a strategic advantage for trespassing narrow channels against external biases (e.g., the gravitational field).
△ Less
Submitted 27 November, 2014; v1 submitted 30 April, 2014;
originally announced April 2014.
-
Sliding drops across alternating hydrophobic and hydrophilic stripes
Authors:
M. Sbragaglia,
L. Biferale,
G. Amati,
S. Varagnolo,
D. Ferraro,
G. Mistura,
M. Pierno
Abstract:
We perform a joint numerical and experimental study to sistematically characterize the motion of drops sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with large wettability contrast, and typical width of hundreds of $μ\textrm{m}$. The fraction of the hydrophobic stripes has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be descr…
▽ More
We perform a joint numerical and experimental study to sistematically characterize the motion of drops sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with large wettability contrast, and typical width of hundreds of $μ\textrm{m}$. The fraction of the hydrophobic stripes has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be described by a renormalized value of the critical Bond number, i.e. the critical dimensionless force needed to depin the drop before it starts to move. Close to the critical Bond number we observe a jerkily motion characterized by an evident stick-slip dynamics. As a result, dissipation is strongly localized in time, and the mean velocity of the drops can easily decrease by an order of magnitude compared to the sliding on homogeneous surface. Lattice Boltzmann (LB) numerical simulations are crucial for disclosing to what extent the sliding dynamics can be deduced from the computed balance of capillary, viscous and body forces at varying the Bond number, the surface composition and the liquid viscosity. Away from the critical Bond number, we characterize both experimentally and numerically the dissipation inside the droplet by studying the relation between the average velocity and the applied volume forces.
△ Less
Submitted 14 November, 2016; v1 submitted 16 October, 2013;
originally announced October 2013.
-
Thermolubricity of Xe monolayers on graphene
Authors:
M. Pierno,
L. Bignardi,
M. C. Righi,
L. Bruschi,
S. Gottardi,
M. Stöhr,
P. L. Silvestrelli,
P. Rudolf,
G. Mistura
Abstract:
The nanofriction of Xe monolayers deposited on graphene was explored with a quartz crystal microbalance (QCM) at temperatures between 25 and 50 K. Graphene was grown by chemical vapor deposition and transferred to the QCM electrodes with a polymer stamp. At low temperatures, the Xe monolayers are fully pinned to the graphene surface. Above 30 K, the Xe film slides and the depinning onset coverage…
▽ More
The nanofriction of Xe monolayers deposited on graphene was explored with a quartz crystal microbalance (QCM) at temperatures between 25 and 50 K. Graphene was grown by chemical vapor deposition and transferred to the QCM electrodes with a polymer stamp. At low temperatures, the Xe monolayers are fully pinned to the graphene surface. Above 30 K, the Xe film slides and the depinning onset coverage beyond which the film starts sliding decreases with temperature. Similar measurements repeated on bare gold show an enhanced slippage of the Xe films and a decrease of the depinning temperature below 25 K. Nanofriction measurements of krypton and nitrogen confirm this scenario.This thermolubric behavior is explained in terms of a recent theory of the size dependence of static friction between adsorbed islands and crystalline substrates.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.
-
Stick-Slip Sliding of Water Drops on Chemically Heterogeneous Surfaces
Authors:
Silvia Varagnolo,
Davide Ferraro,
Paolo Fantinel,
Matteo Pierno,
Giampaolo Mistura,
Giorgio Amati,
Luca Biferale,
Mauro Sbragaglia
Abstract:
We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic…
▽ More
We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic deformations of the drop interface when crossing the stripes. Numerical simulations confirm this view and are used to elucidate the principles underlying the experimental observations.
△ Less
Submitted 6 May, 2013;
originally announced May 2013.
-
Brambilla et al. Reply to a Comment by J. Reinhardt et al. on "Probing the equilibrium dynamics of colloidal hard spheres above the mode-coupling glass transition"
Authors:
G. Brambilla,
D. El Masri,
M. Pierno,
L. Berthier,
L. Cipelletti
Abstract:
G. Brambilla et al. Reply to a Comment by J. Reinhardt et al. questioning the existence of equilibrium dynamics above the critical volume fraction of colloidal hard spheres predicted by mode coupling theory.
G. Brambilla et al. Reply to a Comment by J. Reinhardt et al. questioning the existence of equilibrium dynamics above the critical volume fraction of colloidal hard spheres predicted by mode coupling theory.
△ Less
Submitted 18 October, 2010;
originally announced October 2010.
-
Brambilla, et al. Reply
Authors:
Giovanni Brambilla,
Djamel El Masri,
Matteo Pierno,
Ludovic Berthier,
Luca Cipelletti,
George Petekidis,
Andrew B. Schofield
Abstract:
Brambilla, et al. Reply: van Megen and Williams (vMW) question our recent claim that dense colloidal hard spheres enter at large volume fraction φa dynamical regime not observed in earlier work and not described by the mode-coupling theory (MCT) of the glass transition.
Brambilla, et al. Reply: van Megen and Williams (vMW) question our recent claim that dense colloidal hard spheres enter at large volume fraction φa dynamical regime not observed in earlier work and not described by the mode-coupling theory (MCT) of the glass transition.
△ Less
Submitted 27 August, 2010;
originally announced August 2010.
-
Dynamic light scattering measurements in the activated regime of dense colloidal hard spheres
Authors:
Djamel El Masri,
Giovanni Brambilla,
Matteo Pierno,
George Petekidis,
Andrew Schofield,
Ludovic Berthier,
Luca Cipelletti
Abstract:
We use dynamic light scattering and numerical simulations to study the approach to equilibrium and the equilibrium dynamics of systems of colloidal hard spheres over a broad range of density, from dilute systems up to very concentrated suspensions undergoing glassy dynamics. We discuss several experimental issues (sedimentation, thermal control, non-equilibrium aging effects, dynamic heterogenei…
▽ More
We use dynamic light scattering and numerical simulations to study the approach to equilibrium and the equilibrium dynamics of systems of colloidal hard spheres over a broad range of density, from dilute systems up to very concentrated suspensions undergoing glassy dynamics. We discuss several experimental issues (sedimentation, thermal control, non-equilibrium aging effects, dynamic heterogeneity) arising when very large relaxation times are measured. When analyzed over more than seven decades in time, we find that the equilibrium relaxation time, tau_alpha, of our system is described by the algebraic divergence predicted by mode-coupling theory over a window of about three decades. At higher density, tau_alpha increases exponentially with distance to a critical volume fraction phi_0 which is much larger than the mode-coupling singularity. This is reminiscent of the behavior of molecular glass-formers in the activated regime. We compare these results to previous work, carefully discussing crystallization and size polydispersity effects. Our results suggest the absence of a genuine algebraic divergence of tau_alpha in colloidal hard spheres.
△ Less
Submitted 11 March, 2009;
originally announced March 2009.
-
Probing the equilibrium dynamics of colloidal hard spheres above the mode-coupling glass transition
Authors:
Giovanni Brambilla,
Djamel El Masri,
Matteo Pierno,
Ludovic Berthier,
Luca Cipelletti,
George Petekidis,
Andrew B. Schofield
Abstract:
We use dynamic light scattering and computer simulations to study equilibrium dynamics and dynamic heterogeneity in concentrated suspensions of colloidal hard spheres. Our study covers an unprecedented density range and spans seven decades in structural relaxation time, $\ta$, including equilibrium easurements above $φ_{\rm c}$, the location of the glass transition deduced from fitting our data…
▽ More
We use dynamic light scattering and computer simulations to study equilibrium dynamics and dynamic heterogeneity in concentrated suspensions of colloidal hard spheres. Our study covers an unprecedented density range and spans seven decades in structural relaxation time, $\ta$, including equilibrium easurements above $φ_{\rm c}$, the location of the glass transition deduced from fitting our data to mode-coupling theory. Instead of falling out of equilibrium, the system remains ergodic above $φ_{\rm c}$ and enters a new dynamical regime where $\ta$ increases with a functional form that was not anticipated by previous experiments, while the amplitude of dynamic heterogeneity grows slower than a power law with $\ta$, as found in molecular glass-formers close to the glass transition.
△ Less
Submitted 3 April, 2009; v1 submitted 19 September, 2008;
originally announced September 2008.
-
Direct experimental evidence of a growing length scale accompanying the glass transition
Authors:
Ludovic Berthier,
Giulio Biroli,
Jean-Philippe Bouchaud,
Luca Cipelletti,
Djamel El Masri,
Denis L'Hôte,
Francois Ladieu,
Matteo Pierno
Abstract:
Understanding glass formation is a challenge because the existence of a true glass state, distinct from liquid and solid, remains elusive: Glasses are liquids that have become too viscous to flow. An old idea, as yet unproven experimentally, is that the dynamics becomes sluggish as the glass transition approaches because increasingly larger regions of the material have to move simultaneously to…
▽ More
Understanding glass formation is a challenge because the existence of a true glass state, distinct from liquid and solid, remains elusive: Glasses are liquids that have become too viscous to flow. An old idea, as yet unproven experimentally, is that the dynamics becomes sluggish as the glass transition approaches because increasingly larger regions of the material have to move simultaneously to allow flow. We introduce new multipoint dynamical susceptibilities to estimate quantitatively the size of these regions and provide direct experimental evidence that the glass formation of molecular liquids and colloidal suspensions is accompanied by growing dynamic correlation length scales.
△ Less
Submitted 16 December, 2005;
originally announced December 2005.
-
Aging and ultra-slow equilibration in concentrated colloidal hard spheres
Authors:
Djamel El Masri,
Matteo Pierno,
Ludovic Berthier,
Luca Cipelletti
Abstract:
We study the dynamic behaviour of concentrated colloidal hard spheres using Time Resolved Correlation, a light scattering technique that can detect the slow evolution of the dynamics in out-of-equilibrium systems. Surprisingly, equilibrium is reached a very long time after sample initialization, the non-stationary regime lasting up to three orders of magnitude more than the relaxation time of th…
▽ More
We study the dynamic behaviour of concentrated colloidal hard spheres using Time Resolved Correlation, a light scattering technique that can detect the slow evolution of the dynamics in out-of-equilibrium systems. Surprisingly, equilibrium is reached a very long time after sample initialization, the non-stationary regime lasting up to three orders of magnitude more than the relaxation time of the system. Before reaching equilibrium, the system displays unusual aging behaviour. The intermediate scattering function decays faster than exponentially and its relaxation time evolves non-monotonically with sample age.
△ Less
Submitted 21 June, 2005;
originally announced June 2005.
-
Liquid-liquid phase separation of a surfactant-solubilized membrane protein
Authors:
R. Piazza,
M. Pierno,
E. Vignati,
G. Venturoli,
F. Francia,
A. Mallardi,
G. Palazzo
Abstract:
The phase behavior of membrane proteins stems from a complex synergy with the amphiphilic molecules required for their solubilization. We show that ionization of a pH-sensitive surfactant, LDAO, bound to a bacterial photosynthetic protein, the Reaction Center (RC), leads in a narrow pH range to protein liquid-liquid phase separation in surprisingly stable `droplets', forerunning reversible aggre…
▽ More
The phase behavior of membrane proteins stems from a complex synergy with the amphiphilic molecules required for their solubilization. We show that ionization of a pH-sensitive surfactant, LDAO, bound to a bacterial photosynthetic protein, the Reaction Center (RC), leads in a narrow pH range to protein liquid-liquid phase separation in surprisingly stable `droplets', forerunning reversible aggregation at lower pH. Phase segregation is promoted by increasing temperature and hindered by adding salt. RC light-absorption and photoinduced electron cycle are moreover strongly affected by phase segregation.
△ Less
Submitted 22 November, 2002;
originally announced November 2002.
