-
Neyman-Pearson Detector for Ambient Backscatter Zero-Energy-Devices Beacons
Authors:
Shanglin Yang,
Jean-Marie Gorce,
Muhammad Jehangir Khan,
Dinh-Thuy Phan-Huy,
Guillaume Villemaud
Abstract:
Recently, a novel ultra-low power indoor wireless positioning system has been proposed. In this system, Zero-Energy-Devices (ZED) beacons are deployed in Indoor environments, and located on a map with unique broadcast identifiers. They harvest ambient energy to power themselves and backscatter ambient waves from cellular networks to send their identifiers. This paper presents a novel detection met…
▽ More
Recently, a novel ultra-low power indoor wireless positioning system has been proposed. In this system, Zero-Energy-Devices (ZED) beacons are deployed in Indoor environments, and located on a map with unique broadcast identifiers. They harvest ambient energy to power themselves and backscatter ambient waves from cellular networks to send their identifiers. This paper presents a novel detection method for ZEDs in ambient backscatter systems, with an emphasis on performance evaluation through experimental setups and simulations. We introduce a Neyman-Pearson detection framework, which leverages a predefined false alarm probability to determine the optimal detection threshold. This method, applied to the analysis of backscatter signals in a controlled testbed environment, incorporates the use of BC sequences to enhance signal detection accuracy. The experimental setup, conducted on the FIT/CorteXlab testbed, employs a two-node configuration for signal transmission and reception. Key performance metrics, which is the peak-to-lobe ratio, is evaluated, confirming the effectiveness of the proposed detection model. The results demonstrate a detection system that effectively handles varying noise levels and identifies ZEDs with high reliability. The simulation results show the robustness of the model, highlighting its capacity to achieve desired detection performance even with stringent false alarm thresholds. This work paves the way for robust ZED detection in real-world scenarios, contributing to the advancement of wireless communication technologies.
△ Less
Submitted 28 April, 2025; v1 submitted 14 April, 2025;
originally announced April 2025.
-
First Real-Time Detection of Ambient Backscatters using Uplink Sounding Reference Signals of a Commercial 4G Smartphone
Authors:
Ahmed ElSanhoury,
Islam Galal,
Khaled AlKady,
Aml ElKhodary,
Dinh-Thuy Phan-Huy,
Ayman M. Hassan
Abstract:
Recently, cellular Ambient Backscattering has been proposed for cellular networks. Up to now an Ambient backscatter device, called zero-energy device or tag, broadcasted its message by backscattering ambient downlink waves from the closest Base Station (BS) according to a predefined pattern. A tag was detected by smartphones nearby. This paper presents, for the first time, a novel ambient backscat…
▽ More
Recently, cellular Ambient Backscattering has been proposed for cellular networks. Up to now an Ambient backscatter device, called zero-energy device or tag, broadcasted its message by backscattering ambient downlink waves from the closest Base Station (BS) according to a predefined pattern. A tag was detected by smartphones nearby. This paper presents, for the first time, a novel ambient backscatter communication system exploiting uplink ambient waves from smartphones instead of downlink waves. In this novel system, a BS connected to a smartphone monitors the uplink pilot signals and detects TAGs in proximity. The proposed system is implemented and tested with one prototype of TAG, a commercial off-the shelf 4G smartphone and a 4G Software Defined Radio (SDR) BS. Indoor and outdoor experiments were conducted to assess the proposed technique. These very preliminary experiments exhibit a promising potential. In indoor, a detection probability of more than 90% has been achieved without false alarm when the TAG was 3 meters from the UE, and the BS 20 meters away of them, behind walls and obstacles.
△ Less
Submitted 10 April, 2025; v1 submitted 26 January, 2025;
originally announced January 2025.
-
Ambient Backscatter Communication in LTE Uplink Sounding Reference Signal
Authors:
Jingyi Liao,
Tianshu Zhang,
Kalle Ruttik,
Riku Jäntti,
Dinh-Thuy Phan-Huy
Abstract:
Ambient Internet of Things (AIoT), recently standardized by the 3rd Generation Partnership Project (3GPP), demands a low-power wide-area communication solution that operates several orders of magnitude below the power requirements of existing 3GPP specifications. Ambient backscatter communication (AmBC) is considered as a competitive potential technique by harvesting energy from the ambient RF sig…
▽ More
Ambient Internet of Things (AIoT), recently standardized by the 3rd Generation Partnership Project (3GPP), demands a low-power wide-area communication solution that operates several orders of magnitude below the power requirements of existing 3GPP specifications. Ambient backscatter communication (AmBC) is considered as a competitive potential technique by harvesting energy from the ambient RF signal. This paper considers a symbiotic AmBC into Long Term Evolution (LTE) cellular system uplink. Leveraging by LTE uplink channel estimation ability, AIoT conveys its own message to Base Station (BS) by modulating backscatter path. We explore the detector design, analyze the error performance of the proposed scheme, provide exact expression and its Guassian approximation for the error probability. We corroborate the receiver error performance by Monte Carlo simulation. Analysis of communication range reveals AmBC achieves a reasonable BER of order of magnitude $10^{-2}$ within four times wavelength reading distance. In addition, a AmBC prototype in LTE uplink confirms the its feasibility. The over-the-air experiment results validate theoretical analysis. Hence, the proposed AmBC approach enables AIoT deployment with minimal changes to the LTE system.
△ Less
Submitted 19 January, 2025;
originally announced January 2025.
-
Indoor Localization of Smartphones Thanks to Zero-Energy-Devices Beacons
Authors:
Shanglin Yang,
Yohann Benedic,
Dinh-Thuy Phan-Huy,
Jean-Marie Gorce,
Guillaume Villemaud
Abstract:
In this paper, we present a new ultra-low power method of indoor localization of smartphones (SM) based on zero-energy-devices (ZEDs) beacons instead of active wireless beacons. Each ZED is equipped with a unique identification number coded into a bit-sequence, and its precise position on the map is recorded. An SM inside the building is assumed to have access to the map of ZEDs. The ZED backscatt…
▽ More
In this paper, we present a new ultra-low power method of indoor localization of smartphones (SM) based on zero-energy-devices (ZEDs) beacons instead of active wireless beacons. Each ZED is equipped with a unique identification number coded into a bit-sequence, and its precise position on the map is recorded. An SM inside the building is assumed to have access to the map of ZEDs. The ZED backscatters ambient waves from base stations (BSs) of the cellular network. The SM detects the ZED message in the variations of the received ambient signal from the BS. We accurately simulate the ambient waves from a BS of Orange 4G commercial network, inside an existing large building covered with ZED beacons, thanks to a ray-tracing-based propagation simulation tool. Our first performance evaluation study shows that the proposed localization system enables us to determine in which room a SM is located, in a realistic and challenging propagation scenario.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Zero-energy Devices for 6G: Technical Enablers at a Glance
Authors:
Onel López,
Ritesh Kumar Singh,
Dinh-Thuy Phan-Huy,
Efstathios Katranaras,
Nafiseh Mazloum,
Riku Jäntti,
Hamza Khan,
Osmel Rosabal,
Pavlos Alexias,
Prasoon Raghuwanshi,
David Ruiz-Guirola,
Bikramjit Singh,
Andreas Höglund,
Dung Pham Van,
Amirhossein Azarbahram,
Jeroen Famaey
Abstract:
Low-cost, resource-constrained, maintenance-free, and energy-harvesting (EH) Internet of Things (IoT) devices, referred to as zero-energy devices (ZEDs), are rapidly attracting attention from industry and academia due to their myriad of applications. To date, such devices remain primarily unsupported by modern IoT connectivity solutions due to their intrinsic fabrication, hardware, deployment, and…
▽ More
Low-cost, resource-constrained, maintenance-free, and energy-harvesting (EH) Internet of Things (IoT) devices, referred to as zero-energy devices (ZEDs), are rapidly attracting attention from industry and academia due to their myriad of applications. To date, such devices remain primarily unsupported by modern IoT connectivity solutions due to their intrinsic fabrication, hardware, deployment, and operation limitations, while lacking clarity on their key technical enablers and prospects. Herein, we address this by discussing the main characteristics and enabling technologies of ZEDs within the next generation of mobile networks, specifically focusing on unconventional EH sources, multi-source EH, power management, energy storage solutions, manufacturing material and practices, backscattering, and low-complexity receivers. Moreover, we highlight the need for lightweight and energy-aware computing, communication, and scheduling protocols, while discussing potential approaches related to TinyML, duty cycling, and infrastructure enablers like radio frequency wireless power transfer and wake-up protocols. Challenging aspects and open research directions are identified and discussed in all the cases. Finally, we showcase an experimental ZED proof-of-concept related to ambient cellular backscattering.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Zero-Energy-Device for 6G: First Real-Time Backscatter Communication thanks to the Detection of Pilots from an Ambient Commercial Cellular Network
Authors:
Papis Ndiaye,
Dinh-Thuy Phan-Huy,
Ayman Hassan,
Jingyi Liao,
Xiyu Wang,
Kalle Ruttik,
Riku Jantti
Abstract:
Ambient backscatter communication technology (AmBC) and a novel device category called zero-energy devices (ZED) have recently emerged as potential components for the forthcoming 6th generation (6G) networks. A ZED communicates with a smartphone without emitting additional radio waves, by backscattering ambient waves from base stations. Thanks to its very low consumption, a ZED powers itself by ha…
▽ More
Ambient backscatter communication technology (AmBC) and a novel device category called zero-energy devices (ZED) have recently emerged as potential components for the forthcoming 6th generation (6G) networks. A ZED communicates with a smartphone without emitting additional radio waves, by backscattering ambient waves from base stations. Thanks to its very low consumption, a ZED powers itself by harvesting ambient light energy. However, the time variations of data traffic in cellular networks prevents AmBC to work properly. Recent works have demonstrated experimentally that a backscatter device could be detected by listening only ambient pilot signals (which are steady) instead of the whole ambient signal (which is bursty) of 4G. However, these experiments were run with a 4G base station emulator and a bulky energy greedy backscatter device. In this paper, for the first time, we demonstrate real-time AmBC on the field, with Orange commercial 4G network as ambient source and Orange Zero-Energy Device.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Experimental Demonstration of 3D Reflected Beamforming at sub6GHz thanks to Varactor Based Reconfigurable Intelligent Surface
Authors:
Philippe Ratajczak,
Eric Séguenot,
Dinh-Thuy Phan-Huy
Abstract:
Reconfigurable intelligent surface (RIS) is a promising solution to boost coverage sustainably by reflecting waves from a transmitter to a receiver and acting as a low-power and passive relay. In this paper, for the first time, we demonstrate experimentally that a reconfigurable intelligent surface designed for sub6GHz, and using varactor technology, can perform three-dimensional reflective beamfo…
▽ More
Reconfigurable intelligent surface (RIS) is a promising solution to boost coverage sustainably by reflecting waves from a transmitter to a receiver and acting as a low-power and passive relay. In this paper, for the first time, we demonstrate experimentally that a reconfigurable intelligent surface designed for sub6GHz, and using varactor technology, can perform three-dimensional reflective beamforming. This result is achieved with a RIS prototype of 984 unit-cells, thanks to a compact control circuit individually addressing and configuring the voltage of each unit-cell, with a distinct voltage. To our knowledge, this prototype configures 17 to 70 times more distinct voltages than in the state-of-the-art. The experimental results in an indoor environment show a 10 dB gain. They also show, for the first time, that producing such a new prototype is feasible with minimal energy footprint and environmental impact, thanks to refurbishing. Indeed, a reflectarray antenna originally designed for three-dimensional beamforming has been turned into a RIS.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
RIS-Enabled Smart Wireless Environments: Deployment Scenarios, Network Architecture, Bandwidth and Area of Influence
Authors:
George C. Alexandropoulos,
Dinh-Thuy Phan-Huy,
Kostantinos D. Katsanos,
Maurizio Crozzoli,
Henk Wymeersch,
Petar Popovski,
Philippe Ratajczak,
Yohann Bénédic,
Marie-Helene Hamon,
Sebastien Herraiz Gonzalez,
Placido Mursia,
Marco Rossanese,
Vincenzo Sciancalepore,
Jean-Baptiste Gros,
Sergio Terranova,
Gabriele Gradoni,
Paolo Di Lorenzo,
Moustafa Rahal,
Benoit Denis,
Raffaele D'Errico,
Antonio Clemente,
Emilio Calvanese Strinati
Abstract:
Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enab…
▽ More
Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enabled smart wireless environments that have been recently designed within the ongoing European Union Horizon 2020 RISE-6G project, as well as a network architecture integrating RISs with existing standardized interfaces. We identify various RIS deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and respective capabilities. Furthermore, we introduce and discuss, with the aid of simulations and reflectarray measurements, two novel metrics that emerge in the context of RIS-empowered wireless systems: the RIS bandwidth and area of influence. Their extensive investigation corroborates the need for careful deployment and planning of the RIS technology in future networks.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Dual Gradient Descent EMF-Aware MU-MIMO Beamforming in RIS-Aided 6G Networks
Authors:
Yi Yu,
Rita Ibrahim,
Dinh-Thuy Phan-Huy
Abstract:
Reconfigurable Intelligent Surface (RIS) is one of the key technologies for the upcoming 6th Generation (6G) communications, which can improve the signal strength at the receivers by adding artificial propagation paths. In the context of Downlink (DL) Multi-User Multiple-Input Multiple-Output (MU-MIMO) communications, designing an appropriate Beamforming (BF) scheme to take full advantage of this…
▽ More
Reconfigurable Intelligent Surface (RIS) is one of the key technologies for the upcoming 6th Generation (6G) communications, which can improve the signal strength at the receivers by adding artificial propagation paths. In the context of Downlink (DL) Multi-User Multiple-Input Multiple-Output (MU-MIMO) communications, designing an appropriate Beamforming (BF) scheme to take full advantage of this reconfigured propagation environment and improve the network capacity is a major challenge. Due to the spatial dimension provided by MIMO systems, independent data streams can be transmitted to multiple users simultaneously on the same radio resources. It is important to note that serving the same subset of users over a period of time may lead to undesired areas where the average Electromagnetic Field Exposure (EMFE) exceeds regulatory limits. To address this challenge, in this paper, we propose a Dual Gradient Descent (Dual-GD)-based Electromagnetic Field (EMF)-aware MU-MIMO BF scheme that aims to optimize the overall capacity under EMFE constraints in RIS-aided 6G cellular networks.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
EMF-Aware MU-MIMO Beamforming in RIS-Aided Cellular Networks
Authors:
Yi Yu,
Rita Ibrahim,
Dinh-Thuy Phan-Huy
Abstract:
Reconfigurable Intelligent Surfaces (RISs) are one of the key emerging 6th Generation (6G) technologies that are expected to improve the link budgets between transmitters and receivers by adding artificial propagation paths. In such re-configured propagation environment, Downlink (DL) Multi-User Multi-Input Multi-Output (MU-MIMO) brings capacity improvement to cellular networks. It benefits from t…
▽ More
Reconfigurable Intelligent Surfaces (RISs) are one of the key emerging 6th Generation (6G) technologies that are expected to improve the link budgets between transmitters and receivers by adding artificial propagation paths. In such re-configured propagation environment, Downlink (DL) Multi-User Multi-Input Multi-Output (MU-MIMO) brings capacity improvement to cellular networks. It benefits from the spatial dimension offered by MIMO systems to enable simultaneous transmission of independent data streams to multiple users on the same radio resources by applying appropriate Beamforming (BF) schemes. However, in some cases, serving the same subset of users for a long period of time may cause some undesired regions where the average Electromagnetic Field Exposure (EMFE) exceeds the regulatory limits. To address this challenge, we propose in this paper a novel Electromagnetic Field (EMF) aware MU-MIMO BF scheme that aims to optimize the overall capacity under EMF constraints in RIS-aided cellular networks.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Electromagnetic Field Exposure Avoidance thanks to Non-Intended User Equipment and RIS
Authors:
Hao Guo,
Dinh-Thuy Phan-Huy,
Tommy Svensson
Abstract:
On the one hand, there is a growing demand for high throughput which can be satisfied thanks to the deployment of new networks using massive multiple-input multiple-output (MIMO) and beamforming. On the other hand, in some countries or cities, there is a demand for arbitrarily low electromagnetic field exposure (EMFE) of people not concerned by the ongoing communication, which slows down the deplo…
▽ More
On the one hand, there is a growing demand for high throughput which can be satisfied thanks to the deployment of new networks using massive multiple-input multiple-output (MIMO) and beamforming. On the other hand, in some countries or cities, there is a demand for arbitrarily low electromagnetic field exposure (EMFE) of people not concerned by the ongoing communication, which slows down the deployment of new networks. Recently, it has been proposed to take the opportunity, when designing the future 6th generation (6G), to offer, in addition to higher throughput, a new type of service: arbitrarily low EMFE. Recent works have shown that a reconfigurable intelligent surface (RIS), jointly optimized with the base station (BS) beamforming can improve the received throughput at the desired location whilst reducing EMFE everywhere. In this paper, we introduce a new concept of a non-intended user (NIU). An NIU is a user of the network who requests low EMFE when he/she is not downloading/uploading data. An NIU lets his/her device, called NIU equipment (NIUE), exchange some control signaling and pilots with the network, to help the network avoid exposing NIU to waves that are transporting data for another user of the network: the intended user (IU), whose device is called IU equipment (IUE). Specifically, we propose several new schemes to maximize the IU throughput under an EMFE constraint at the NIU (in practice, an interference constraint at the NIUE). Several propagation scenarios are investigated. Analytical and numerical results show that proper power allocation and beam optimization can remarkably boost the EMFE-constrained system's performance with limited complexity and channel information.
△ Less
Submitted 7 October, 2022; v1 submitted 21 September, 2022;
originally announced September 2022.
-
A Novel RIS-Aided EMF-Aware Beamforming Using Directional Spreading, Truncation and Boosting
Authors:
Nour Awarkeh,
Dinh-Thuy Phan-Huy,
Raphael Visoz,
Marco Di Renzo
Abstract:
This paper addresses a drawback of massive multiple-input multiple-output Maximum Ratio Transmission beamforming. In some propagation conditions, when the base station serves the same target user equipment for a long period, it reduces the transmit power (and degrades the received power) to avoid creating high exposure regions located in the vicinity of the antenna and concentrated in few directio…
▽ More
This paper addresses a drawback of massive multiple-input multiple-output Maximum Ratio Transmission beamforming. In some propagation conditions, when the base station serves the same target user equipment for a long period, it reduces the transmit power (and degrades the received power) to avoid creating high exposure regions located in the vicinity of the antenna and concentrated in few directions (corresponding to the best propagation paths between the antenna and the receiver). In this paper, we propose a novel electromagnetic field aware beamforming scheme, which (i) spreads the beamforming radiation pattern in the angular domain by adding artificial propagation paths thanks to reconfigurable intelligent surfaces, (ii) truncates the pattern in strong directions, and (iii) boosts it in weak directions. Compared to existing solutions, it maximizes the received power. However, it also consumes more power. Finally, truncation alone is the best trade-off between received power and energy efficiency, under exposure constrain.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Creating and Operating Areas With Reduced Electromagnetic Field Exposure Thanks to Reconfigurable Intelligent Surfaces
Authors:
Dinh-Thuy Phan-Huy,
Yohann Bénédic,
Sebastien Herraiz Gonzalez,
Philippe Ratajczak
Abstract:
Mobile network operators must provide a target quality of service within a target coverage area. Each generation of networks from the 2nd to the 5th has reached higher quality-of-service (QoS) targets and coverage area sizes. However, the deployment of new networks is sometimes challenged by Electromagnetic Field (EMF) exposure constraints. In this paper, to take into account these constraints, we…
▽ More
Mobile network operators must provide a target quality of service within a target coverage area. Each generation of networks from the 2nd to the 5th has reached higher quality-of-service (QoS) targets and coverage area sizes. However, the deployment of new networks is sometimes challenged by Electromagnetic Field (EMF) exposure constraints. In this paper, to take into account these constraints, we assess the novel and recent concept of Reduced EMF Exposure Area. Such an area would be created and operated by a mobile network operator upon the request of its customers. In such an area, customers keep enjoying high data rate internet access while getting a reduced EMF exposure. To ensure this EMF exposure reduction, we propose to deploy Reconfigurable Intelligent Surfaces (RIS) connected to the mobile network and exploit a joint RIS-M-MIMO uplink beamforming scheme. We use our ray-tracing-based simulation tool to visualize and characterize the Reduced EMF Exposure Area in a challenging environment in terms of propagation. Our simulations show that an operator can create and operate such an area under the condition that it carefully places the RIS in the environment.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
A Novel RIS-Aided EMF Exposure Aware Approach using an Angularly Equalized Virtual Propagation Channel
Authors:
Nour Awarkeh,
Dinh-Thuy Phan-Huy,
Marco Di Renzo
Abstract:
Massive Multiple-Input Multiple-Output systems with beamforming are key components of the 5th and the future 6th generation of networks. However, in some cases, where the BS serves the same user for a long period, and in some propagation conditions, such systems reduce their transmit power to avoid creating unwanted regions of electromagnetic field exposure exceeding the regulatory threshold, beyo…
▽ More
Massive Multiple-Input Multiple-Output systems with beamforming are key components of the 5th and the future 6th generation of networks. However, in some cases, where the BS serves the same user for a long period, and in some propagation conditions, such systems reduce their transmit power to avoid creating unwanted regions of electromagnetic field exposure exceeding the regulatory threshold, beyond the circle around the BS that limits the distance between people and the BS antenna. Such power reduction strongly degrades the received power at the target user. Recently, exposition aware beamforming schemes aided by self-tuning reconfigurable intelligent surfaces derived from maximum ratio transmission beamforming, have been proposed: truncated beamforming. However, such scheme is highly complex. In this paper, we propose a novel and low complexity reconfigurable intelligent surface aided beamforming scheme called Equalized beamforming, which applies maximum ratio transmission to an angularly equalized virtual propagation channel. Our simulations show that our proposed scheme outperforms the reduced beamforming scheme, whilst complying with the exposition regulation.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Smart Wireless Environments Enabled by RISs: Deployment Scenarios and Two Key Challenges
Authors:
George C. Alexandropoulos,
Maurizio Crozzoli,
Dinh-Thuy Phan-Huy,
Konstantinos D. Katsanos,
Henk Wymeersch,
Petar Popovski,
Philippe Ratajczak,
Yohann Bénédic,
Marie-Helene Hamon,
Sebastien Herraiz Gonzalez,
Raffaele D'Errico,
Emilio Calvanese Strinati
Abstract:
Reconfigurable Intelligent Surfaces (RISs) constitute the enabler for programmable propagation of electromagnetic signals, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless communications networks. In this paper, we present various deployment scenarios for R…
▽ More
Reconfigurable Intelligent Surfaces (RISs) constitute the enabler for programmable propagation of electromagnetic signals, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless communications networks. In this paper, we present various deployment scenarios for RIS-enabled smart wireless environments that have been recently designed by the ongoing EU H2020 RISE-6G project. The scenarios are taxonomized according to performance objectives, in particular, connectivity and reliability, localization and sensing, as well as sustainability and secrecy. We identify various deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and their respective capabilities. Furthermore, we introduce and discuss, via preliminary simulation results and reflectarray measurements, two key novel challenges with RIS-enabled smart wireless environments, namely, the area of influence and the bandwidth of influence of RISs, which corroborate the need for careful deployment and planning of this new technology.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
RIS-Aware Indoor Network Planning: The Rennes Railway Station Case
Authors:
Antonio Albanese,
Guillermo Encinas-Lago,
Vincenzo Sciancalepore,
Xavier Costa-Pérez,
Dinh-Thuy Phan-Huy,
Stéphane Ros
Abstract:
Future generations of wireless networks will offer newfangled performance via unprecedented solutions: the metasurface innovation will drive such a revolution by posing control onto the surrounding propagation environment, always portrayed as a tamper-proof black-box. The RIS technology, envisioned as the discrete version of a metasurface, can be dynamically configured to alter the propagation pro…
▽ More
Future generations of wireless networks will offer newfangled performance via unprecedented solutions: the metasurface innovation will drive such a revolution by posing control onto the surrounding propagation environment, always portrayed as a tamper-proof black-box. The RIS technology, envisioned as the discrete version of a metasurface, can be dynamically configured to alter the propagation properties of the impinging signals by, e.g., steering the corresponding beams towards defined directions. This will unlock new application opportunities and deliver advanced end-user services. However, this fascinating solution comes at not negligible costs: RIS require ad-hoc design, deployment and management operations to be fully exploited. In this paper, we tackle the RIS placement problem from a theoretical viewpoint, showcasing a large-scale solution on synthetic topologies to improve communication performance while solving the "dead-zone" problem. Additionally, our mathematical framework is empirically validated within a realistic indoor scenario, the Rennes railway station, showing how a complex indoor propagation environment can be fully disciplined by an advanced RIS installation.
△ Less
Submitted 23 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Polarization-Based Reconfigurable Tags for Robust Ambient Backscatter Communications
Authors:
Romain Fara,
Dinh-Thuy Phan-Huy,
Abdelwaheb Ourir,
Yvan Kokar,
Jean-Christophe Prévotet,
Maryline Hélard,
Marco Di Renzo,
Julien De Rosny
Abstract:
Ambient backscatter communication is an emerging and promising low-energy technology for the Internet of Things. In such a system, a tag sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient source. The tag can operate without battery and without generating additional radio waves. However, the tag-to-reader link suffers from the source-to-reader inte…
▽ More
Ambient backscatter communication is an emerging and promising low-energy technology for the Internet of Things. In such a system, a tag sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient source. The tag can operate without battery and without generating additional radio waves. However, the tag-to-reader link suffers from the source-to-reader interference. In this paper, we propose a polarization-based reconfigurable antenna in order to improve the robustness of the tag-to-reader link against the source-to-reader direct interference. More precisely, we compare different types of tags' antennas, different tags' encoding schemes, and different detectors at the reader. By using analysis, numerical simulations, and experiments, we show that a polarization-based reconfigurable tag with four polarization directions significantly outperforms a non-reconfigurable tag, and provides almost the same performance as an ideal reconfigurable tag with a large number of reconfigurable polarization patterns.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
First experimental evaluation of ambient backscatter communications with massive MIMO reader
Authors:
Romain Fara,
Nada Bel-Haj-Maati,
Dinh-Thuy Phan-Huy,
Nadine Malhouroux,
Marco Di Renzo
Abstract:
Ambient backscatter communications have been introduced as low-power communications for green networking. This technology is very promising as it recycles ambient radio frequency waves, however such systems have limitations and suffer from poor performance due to their low-power. In this paper, we present and evaluate the performance of an ambient backscatter system equipped with a massive multipl…
▽ More
Ambient backscatter communications have been introduced as low-power communications for green networking. This technology is very promising as it recycles ambient radio frequency waves, however such systems have limitations and suffer from poor performance due to their low-power. In this paper, we present and evaluate the performance of an ambient backscatter system equipped with a massive multiple input multiple output (MIMO) antenna at the reader side. A mobile device transmits a signal that is backscattered by a tag and received by the reader. Thanks to the spatial diversity of the massive MIMO antenna, the reader is able to identify, for each received signal, the state of the tag (backscattering or transparent) that corresponds to a bit of the tag message. First, we experimentally determine the channel between the device and the reader for two states of the tag. Then using a minimum mean square error algorithm we evaluate the performance of the ambient backscatter communication. We demonstrate that the performance of the ambient backscatter system is significantly improved by the massive MIMO reader.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Robust Ambient Backscatter Communications with Polarization Reconfigurable Tags
Authors:
Romain Fara,
Dinh-Thuy Phan-Huy,
Abdelwaheb Ourir,
Marco Di Renzo,
Julien de Rosny
Abstract:
Ambient backscatter communication system is an emerging and promising low-energy technology for Internet of Things. In such system, a device named tag, sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient source. Such tag can operate without battery and without generating additional wave. However, the tag-to-reader link suffers from the source-to-re…
▽ More
Ambient backscatter communication system is an emerging and promising low-energy technology for Internet of Things. In such system, a device named tag, sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient source. Such tag can operate without battery and without generating additional wave. However, the tag-to-reader link suffers from the source-to-reader direct interference. In this paper, for the first time, we propose to exploit a "polarization reconfigurable" antenna to improve robustness of the tag-to-reader link against the source-to-reader direct interference. Our proposed new tag sends its message by backscattering as an usual tag. However, it repeats its message several times, with a different radiation pattern and polarization, each time. We expect one polarization pattern to be better detected by the reader. We show by simulations and experiments, in line-of-sight and in richly scattering environment, that a polarization reconfigurable tag limited to 4 polarization directions outperforms a nonreconfigurable tag and nearly equals an ideally reconfigurable tag in performance.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Reconfigurable, Intelligent, and SustainableWireless Environments for 6G Smart Connectivity
Authors:
Emilio Calvanese Strinati,
George C. Alexandropoulos,
Henk Wymeersch,
Benoit Denis,
Vincenzo Sciancalepore,
Raffaele D'Errico,
Antonio Clemente,
Dinh-Thuy Phan-Huy,
Elisabeth De Carvalho,
Petar Popovski
Abstract:
Various visions on the forthcoming sixth Generation (6G) networks point towards flexible connect-and-compute technologies to support future innovative services and the corresponding use cases. 6G should be capable to accommodate ever-evolving and heterogeneous applications, future regulations, and diverse user-, service-, and location-based requirements. A key element towards building smart and en…
▽ More
Various visions on the forthcoming sixth Generation (6G) networks point towards flexible connect-and-compute technologies to support future innovative services and the corresponding use cases. 6G should be capable to accommodate ever-evolving and heterogeneous applications, future regulations, and diverse user-, service-, and location-based requirements. A key element towards building smart and energy sustainable wireless systems beyond 5G is the Reconfigurable Intelligent Surface (RIS), which offers programmable control and shaping of the wireless propagation environment.
Capitalizing on this technology potential, in this article we introduce two new concepts: i) wireless environment as a service, which leverages a novel RIS-empowered networking paradigm to trade off diverse, and usually conflicting, connectivity objectives; and ii) performance-boosted areas enabled by RIS-based connectivity, representing competing service provisioning areas that are highly spatially and temporally focused. We discuss the key technological enablers and research challenges with the proposed networking paradigm, and highlight the potential profound role of RISs in the recent Open Radio Access Network (O-RAN) architecture.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
Ambient Backscatter Communications in Mobile Networks: Crowd-Detectable Zero-Energy-Devices
Authors:
D. -T. Phan-Huy,
D. Barthel,
P. Ratajczak,
R. Fara,
M. di Renzo,
J. de Rosny
Abstract:
In this paper, we introduce the new concept of Crowd-Detectable Zero-Energy-Devices. Such devices harvest solar or ambient light energy to power themselves, backscatter ambient waves to communicate, and are detected simultaneously by a smartphone connected to the network, and the network itself, as long as the device is close to the considered smartphone. Such device is a promising sustainable sol…
▽ More
In this paper, we introduce the new concept of Crowd-Detectable Zero-Energy-Devices. Such devices harvest solar or ambient light energy to power themselves, backscatter ambient waves to communicate, and are detected simultaneously by a smartphone connected to the network, and the network itself, as long as the device is close to the considered smartphone. Such device is a promising sustainable solution for the future of the Internet of Things. We describe an example of use case: asset tracking with zero added energy, zero new signals and zero new infrastructure in the network, thanks to the anonymous and transparent participation of smartphones connected to the wireless network. We then present our first prototypes of such devices that backscatter TV, 4G and 5G signals, and show our first experiments in challenging conditions and environments.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Backscatter Communication System With Dumb Diffusing Surface
Authors:
Jean-Marc Kelif,
Dinh-Thuy Phan-Huy
Abstract:
Ambient backscatter communications have been identified for ultra-low energy wireless communications. Indeed, a tag can send a message to a reader without emitting any wave and without battery, simply by backscattering the waves generated by a source. In the simplest implementation of such a system, the tag sends a binary message by oscillating between two states and the reader detects the bits by…
▽ More
Ambient backscatter communications have been identified for ultra-low energy wireless communications. Indeed, a tag can send a message to a reader without emitting any wave and without battery, simply by backscattering the waves generated by a source. In the simplest implementation of such a system, the tag sends a binary message by oscillating between two states and the reader detects the bits by comparing the two distinct received powers. In this paper, for the first time, we propose to study an ambient backscatter communication system, in the presence of a diffusing surface, a simple flat panel that diffuses in all directions. We establish the analytical closed form expression of the power contrast in the presence of the surface. We show that the diffusing surface improves the power contrast. Moreover our approach allows us to express the contrast to noise ratio, and therefore to establish the BER performance. Furthermore, we derive the optimum source transmit power for a given target power contrast. This makes it possible to quantify the amount of energy that can be saved at the source side, thanks to the diffusing surface.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Wireless Environment as a Service Enabled by Reconfigurable Intelligent Surfaces: The RISE-6G Perspective
Authors:
Emilio Calvanese Strinati,
George C. Alexandropoulos,
Vincenzo Sciancalepore,
Marco Di Renzo,
Henk Wymeersch,
Dinh-Thuy Phan-huy,
Maurizio Crozzoli,
Raffaele D'Errico,
Elisabeth De Carvalho,
Petar Popovski,
Paolo Di Lorenzo,
Luca Bastianelli,
Mathieu Belouar,
Julien Etienne Mascolo,
Gabriele Gradoni,
Sendy Phang,
Geoffroy Lerosey,
Benoît Denis
Abstract:
The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructu…
▽ More
The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructure, where new terminal types are embedded in the daily environment. In this context, the RISE-6G project aims at investigating innovative solutions that capitalize on the latest advances in the emerging technology of Reconfigurable Intelligent Surfaces (RISs), which offers dynamic and goal-oriented radio wave propagation control, enabling the concept of the wireless environment as a service. The project will focus on: i) the realistic modeling of RIS-assisted signal propagation, ii) the investigation of the fundamental limits of RIS-empowered wireless communications and sensing, and iii) the design of efficient algorithms for orchestrating networking RISs, in order to implement intelligent, sustainable, and dynamically programmable wireless environments enabling diverse services that go well beyond the 5G capabilities. RISE-6G will offer two unprecedented proof-of-concepts for realizing controlled wireless environments in near-future use cases.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Reconfigurable Intelligent Surface -Assisted Ambient Backscatter Communications -- Experimental Assessment
Authors:
Romain Fara,
Dinh-Thuy Phan-Huy,
Philippe Ratajczak,
Abdelwaheb Ourir,
Marco Di Renzo,
Julien de Rosny
Abstract:
Sixth generation (6G) mobile networks may include new passive technologies, such as ambient backscatter communication or the use of reconfigurable intelligent surfaces, to avoid the emission of waves and the corresponding energy consumption. On the one hand, a reconfigurable intelligent surface improves the network performance by adding electronically controlled reflected paths in the radio propag…
▽ More
Sixth generation (6G) mobile networks may include new passive technologies, such as ambient backscatter communication or the use of reconfigurable intelligent surfaces, to avoid the emission of waves and the corresponding energy consumption. On the one hand, a reconfigurable intelligent surface improves the network performance by adding electronically controlled reflected paths in the radio propagation channel. On the other hand, in an ambient backscatter system, a device, named tag, communicates towards a reader by backscattering the waves of an ambient source (such as a TV tower). However, the tag's backscattered signal is weak and strongly interfered by the direct signal from the ambient source. In this paper, we propose a new reconfigurable intelligent surface assisted ambient backscatter system. The proposed surface allows to control the reflection of an incident wave coming from the exact source location towards the tag and reader locations (creating hot spots at their locations), thanks to passive reflected beams from a predefined codebook. A common phase-shift can also be applied to the beam. Thanks to these features, we demonstrate experimentally that the performance of ambient backscatter communications can be significantly improved.
△ Less
Submitted 7 April, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Predictor Antenna: A Technique to Boost the Performance of Moving Relays
Authors:
Hao Guo,
Behrooz Makki,
Dinh-Thuy Phan-Huy,
Erik Dahlman,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
In future wireless systems, a large number of users may access the networks via moving relays (MRs) installed on top of vehicles. One of the main challenges of MRs is rapid channel variation which may make channel estimation, and its following procedures, difficult. To address these issues, various schemes are designed, among which predictor antenna (PA) is a candidate. The PA setup refers to a sy…
▽ More
In future wireless systems, a large number of users may access the networks via moving relays (MRs) installed on top of vehicles. One of the main challenges of MRs is rapid channel variation which may make channel estimation, and its following procedures, difficult. To address these issues, various schemes are designed, among which predictor antenna (PA) is a candidate. The PA setup refers to a system with two (sets of) antennas on top of a vehicle, where the PA(s) positioned in front of the vehicle is(are) utilized to predict the channel state information required for data transmission to the receive antennas (RAs) aligned behind the PA. In this paper, we introduce the concept and the potentials of PA systems. Moreover, summarizing the field trials for PAs and the 3GPP attempts on (moving) relays, we compare the performance of different PA and non-PA methods for vehicle communications in both urban and rural areas with the PA setup backhauled through terrestrial or satellite technology, respectively. As we show, with typical parameter settings and vehicle speeds, a single-antenna PA-assisted setup can boost the backhaul throughput of MRs, compared to state-of-the-art open-loop schemes, by up to 50%.
△ Less
Submitted 5 May, 2021; v1 submitted 18 December, 2020;
originally announced December 2020.
-
Ambient backscatters-friendly 5G networks: creating hot spots for tags and good spots for readers
Authors:
Romain Fara,
Dinh-Thuy Phan-Huy,
Marco Di Renzo
Abstract:
In this paper, we present an ambient backscatters-friendly 5G network that creates locations with large power (hot spots) for tags and good reception locations (quiet spots or coherent spots) for readers. The massive multiple input multiple output (M-MIMO) antenna and beamforming capability of the 5G network is used as follows. In a first step, a training device (separate from tags and readers) is…
▽ More
In this paper, we present an ambient backscatters-friendly 5G network that creates locations with large power (hot spots) for tags and good reception locations (quiet spots or coherent spots) for readers. The massive multiple input multiple output (M-MIMO) antenna and beamforming capability of the 5G network is used as follows. In a first step, a training device (separate from tags and readers) is used to send pilots and train the 5G network to perform focusing and/or nulling onto marked locations. In a second step, tags and readers are positioned onto the marked locations. The robustness of M-MIMO beamforming to slight changes in the environment is exploited. Our initial simulation results, in a multipath propagation channel environment, show that creating a hot spot on a tag improves the tag-reader range however with a low probability of detection. Creating a hot spot on a tag and a good reception spot on a reader at the same time, improves the tag-reader range with 99% probability of detection. The study also shows that beamforming does not degrade the performance of a legacy 5G communication.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Reconfigurable Intelligent Surfaces vs. Relaying: Differences, Similarities, and Performance Comparison
Authors:
M. Di Renzo,
K. Ntontin,
J. Song,
F. H. Danufane,
X. Qian,
F. Lazarakis,
J. de Rosny,
D. -T. Phan-Huy,
O. Simeone,
R. Zhang,
M. Debbah,
G. Lerosey,
M. Fink,
S. Tretyakov,
S. Shamai
Abstract:
Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When…
▽ More
Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When used in wireless networks, RISs may operate in a manner similar to relays. This paper elaborates on the key differences and similarities between RISs that are configured to operate as anomalous reflectors and relays. In particular, we illustrate numerical results that highlight the spectral efficiency gains of RISs when their size is sufficiently large as compared with the wavelength of the radio waves. In addition, we discuss key open issues that need to be addressed for unlocking the potential benefits of RISs.
△ Less
Submitted 21 February, 2020; v1 submitted 23 August, 2019;
originally announced August 2019.
-
Key technologies to accelerate the ICT Green evolution -- An operator's point of view
Authors:
Azeddine Gati,
Fatma Ezzahra Salem,
Ana Maria Galindo Serrano,
Didier Marquet,
Stephane Le Masson,
Thomas Rivera,
Dinh-Thuy Phan-Huy,
Zwi Altman,
Jean-Baptiste Landre,
Olivier Simon,
Esther Le Rouzic,
Fabrice Bourgart,
Stephane Gosselin,
Marc Vautier,
Eric Gourdin,
Taoufik En-Najjary,
Mamdouh El-Tabach,
Raluca-Maria Indre,
Guillaume Gerard,
Gwenaelle Delsart
Abstract:
The exponential growth in networks' traffic accompanied by the multiplication of new services like those promised by the 5G led to a huge increase in the infrastructures' energy consumption. All over the world, many telecom operators are facing the problem of energy consumption and Green networking since many years and they all convey today that it turned from sustainable development initiative to…
▽ More
The exponential growth in networks' traffic accompanied by the multiplication of new services like those promised by the 5G led to a huge increase in the infrastructures' energy consumption. All over the world, many telecom operators are facing the problem of energy consumption and Green networking since many years and they all convey today that it turned from sustainable development initiative to an OPEX issue. Therefore, the challenge to make the ICT sector more energy-efficient and environment-friendly has become a fundamental objective not only to green networks but also in the domain of green services that enable the ICT sectors to help other industrial sector to clean their own energy consumption. The present paper is a point of view of a European telecom operator regarding green networking. We address some technological advancements that would enable to accelerate this ICT green evolution after more than 15 years of field experience and international collaborative research projects. Basically, the paper is a global survey of the evolution of the ICT industry in green networks including optical and wireless networks and from hardware improvement to the software era as well as the green orchestration.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Smart Radio Environments Empowered by AI Reconfigurable Meta-Surfaces: An Idea Whose Time Has Come
Authors:
Marco Di Renzo,
Merouane Debbah,
Dinh-Thuy Phan-Huy,
Alessio Zappone,
Mohamed-Slim Alouini,
Chau Yuen,
Vincenzo Sciancalepore,
George C. Alexandropoulos,
Jakob Hoydis,
Haris Gacanin,
Julien de Rosny,
Ahcene Bounceu,
Geoffroy Lerosey,
Mathias Fink
Abstract:
Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner.
Currently, two main factors prevent wireless network operators from building such networks: 1) the lack of control of the wireles…
▽ More
Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner.
Currently, two main factors prevent wireless network operators from building such networks: 1) the lack of control of the wireless environment, whose impact on the radio waves cannot be customized, and 2) the current operation of wireless radios, which consume a lot of power because new signals are generated whenever data has to be transmitted.
In this paper, we challenge the usual "more data needs more power and emission of radio waves" status quo, and motivate that future wireless networks necessitate a smart radio environment: A transformative wireless concept, where the environmental objects are coated with artificial thin films of electromagnetic and reconfigurable material (that are referred to as intelligent reconfigurable meta-surfaces), which are capable of sensing the environment and of applying customized transformations to the radio waves. Smart radio environments have the potential to provide future wireless networks with uninterrupted wireless connectivity, and with the capability of transmitting data without generating new signals but recycling existing radio waves.
This paper overviews the current research efforts on smart radio environments, the enabling technologies to realize them in practice, the need of new communication-theoretic models for their analysis and design, and the long-term and open research issues to be solved towards their massive deployment. In a nutshell, this paper is focused on discussing how the availability of intelligent reconfigurable meta-surfaces will allow wireless network operators to redesign common and well-known network communication paradigms.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Spatial Modulation Based on Reconfigurable Antennas: Performance Evaluation by Using the Prototype of a Reconfigurable Antenna
Authors:
Dung Nguyen Viet,
Marco Di Renzo,
Vedaprabhu Basavarajappa,
Beatriz Bedia Exposito,
Jose Basterrechea,
Dinh-Thuy Phan-Huy
Abstract:
In this paper, we study the performance of spatial modulation based on reconfigurable antennas. Two main contributions are provided. We introduce an analytical framework to compute the error probability, which is shown to be accurate and useful for system optimization. We design and implement the prototype of a reconfigurable antenna that is specifically designed for application to spatial modulat…
▽ More
In this paper, we study the performance of spatial modulation based on reconfigurable antennas. Two main contributions are provided. We introduce an analytical framework to compute the error probability, which is shown to be accurate and useful for system optimization. We design and implement the prototype of a reconfigurable antenna that is specifically designed for application to spatial modulation, and that provides multiple radiation patterns that are used to encode the information bits. By using the measured antenna radiation patterns, we show that spatial modulation based on reconfigurable antennas work in practice, and that its performance can be optimized by appropriately optimizing the radiation patterns to use for a given data rate.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Single-Carrier Spatial Modulation for the Internet of Things: Design and Performance Evaluation by Using Real Compact and Reconfigurable Antennas
Authors:
D. -T. Phan-Huy,
Y. Kokar,
K. Rachedi,
P. Pajusco,
A. Mokh,
T. Magounaki,
R. Masood,
C. Buey,
P. Ratajczak,
N. Malhouroux-Gaffet,
J. -M. Conrat,
J. -C. Prévotet,
A. Ourir,
J. de Rosny,
M. Crussière,
M. Hélard,
A. Gati,
T. Sarrebourse,
M. Di Renzo
Abstract:
In this paper, for the first time, we propose two new solutions to boost the data rate between small connected objects such as glasses and cams and the 5th generation (5G) mobile network, based on spatial modulation, single carrier waveform, compact reconfigurable antennas at the object side and massive multiple input multiple output (M-MIMO) at the network side. In the first new wireless communic…
▽ More
In this paper, for the first time, we propose two new solutions to boost the data rate between small connected objects such as glasses and cams and the 5th generation (5G) mobile network, based on spatial modulation, single carrier waveform, compact reconfigurable antennas at the object side and massive multiple input multiple output (M-MIMO) at the network side. In the first new wireless communication system, a "transmitting object" uses transmit spatial modulation with a compact reconfigurable antenna and a constant envelop amplifier to transmit in high data rate with a low complexity and low power consumption. The space-time digital processing capability of the M-MIMO 5G base station is used to detect such signal. In the second new wireless communication system, a "receiving object" uses receive spatial modulation, a compact multiport antenna and a low complexity detection algorithm to receive in high data rate with a low complexity signal processing. The space-time beamforming capability of the M-MIMO 5G base stations is exploited to deliver a signal that is pre-equalized enough to be detected by the object. For the first time, we present experiments showing that M-MIMO allows for the re-introduction of single carrier modulation waveform. For the first time, we present performance results obtained with real existing compact antennas and compact reconfigurable antennas, showing that the two new communication systems outperform conventional modulation in terms of energy efficiency and complexity.
△ Less
Submitted 17 December, 2018;
originally announced December 2018.
-
Massive Multiple Input Massive Multiple Output for 5G Wireless Backhauling
Authors:
Dinh-Thuy Phan-Huy,
Philippe Ratajczak,
Raffaele D'Errico,
Jan Jarvelainen,
Di Kong,
Katsuyuki Haneda,
Berna Bulut,
Aki Karttunen,
Mark Beach,
Evangelos Mellios,
Mario Castaneda,
Mythri Hunukumbure,
Tommy Svensson
Abstract:
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other.…
▽ More
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other. Hundreds of data streams are spatially multiplexed through a short range and line of sight massive multiple input massive multiple output propagation channel thanks to a new low complexity spatial multiplexing scheme, called block discrete Fourier transform based spatial multiplexing with maximum ratio transmission. Its performance in real and existing environments is assessed using accurate ray-tracing tools and antenna models. In the best simulated scenario, 1.6 kbits per second per Hz of spectral efficiency is attained, corresponding to 80% of Singular Value Decomposition performance, with a transmitter and a receiver that are 200 and 10,000 times less complex, respectively.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
