-
Some new techniques to use in serial sparse Cholesky factorization algorithms
Authors:
M. Ozan Karsavuran,
Esmond G. Ng,
Barry W. Peyton,
Jonathan L. Peyton
Abstract:
We present a new variant of serial right-looking supernodal sparse Cholesky factorization (RL). Our comparison of RL with the multifrontal method confirms that RL is simpler, slightly faster, and requires slightly less storage. The key to the rest of the work in this paper is recent work on reordering columns within supernodes so that the dense off-diagonal blocks in the factor matrix joining pair…
▽ More
We present a new variant of serial right-looking supernodal sparse Cholesky factorization (RL). Our comparison of RL with the multifrontal method confirms that RL is simpler, slightly faster, and requires slightly less storage. The key to the rest of the work in this paper is recent work on reordering columns within supernodes so that the dense off-diagonal blocks in the factor matrix joining pairs of supernodes are fewer and larger. We present a second new variant of serial right-looking supernodal sparse Cholesky factorization (RLB), where this one is specifically designed to exploit fewer and larger off-diagonal blocks in the factor matrix obtained by reordering within supernodes. A key distinction found in RLB is that it uses no floating-point working storage and performs no assembly operations. Our key finding is that RLB is unequivocally faster than its competitors. Indeed, RLB is consistently, but modestly, faster than its competitors whenever Intel's MKL sequential BLAS are used. More importantly, RLB is substantially faster than its competitors whenever Intel's MKL multithreaded BLAS are used. Finally, RLB using the multithreaded BLAS achieves impressive speedups over RLB using the sequential BLAS.
△ Less
Submitted 19 September, 2024;
originally announced September 2024.
-
Depth Evaluation for Metal Surface Defects by Eddy Current Testing using Deep Residual Convolutional Neural Networks
Authors:
Tian Meng,
Yang Tao,
Ziqi Chen,
Jorge R. Salas Avila,
Qiaoye Ran,
Yuchun Shao,
Ruochen Huang,
Yuedong Xie,
Qian Zhao,
Zhijie Zhang,
Hujun Yin,
Anthony J. Peyton,
Wuliang Yin
Abstract:
Eddy current testing (ECT) is an effective technique in the evaluation of the depth of metal surface defects. However, in practice, the evaluation primarily relies on the experience of an operator and is often carried out by manual inspection. In this paper, we address the challenges of automatic depth evaluation of metal surface defects by virtual of state-of-the-art deep learning (DL) techniques…
▽ More
Eddy current testing (ECT) is an effective technique in the evaluation of the depth of metal surface defects. However, in practice, the evaluation primarily relies on the experience of an operator and is often carried out by manual inspection. In this paper, we address the challenges of automatic depth evaluation of metal surface defects by virtual of state-of-the-art deep learning (DL) techniques. The main contributions are three-fold. Firstly, a highly-integrated portable ECT device is developed, which takes advantage of an advanced field programmable gate array (Zynq-7020 system on chip) and provides fast data acquisition and in-phase/quadrature demodulation. Secondly, a dataset, termed as MDDECT, is constructed using the ECT device by human operators and made openly available. It contains 48,000 scans from 18 defects of different depths and lift-offs. Thirdly, the depth evaluation problem is formulated as a time series classification problem, and various state-of-the-art 1-d residual convolutional neural networks are trained and evaluated on the MDDECT dataset. A 38-layer 1-d ResNeXt achieves an accuracy of 93.58% in discriminating the surface defects in a stainless steel sheet. The depths of the defects vary from 0.3 mm to 2.0 mm in a resolution of 0.1 mm. In addition, results show that the trained ResNeXt1D-38 model is immune to lift-off signals.
△ Less
Submitted 8 March, 2021;
originally announced April 2021.
-
A Class D Power Amplifier for Multi-Frequency Eddy Current Testing Based on Multi-Simultaneous-Frequency Selective Harmonic Elimination Pulse Width Modulation
Authors:
Yang Tao,
Christos Ktistis,
Yifei Zhao,
Wuliang Yin,
Anthony J Peyton
Abstract:
Efficiency and multisimultaneous-frequency (MSF) output capability are two major criteria characterizing the performance of a power amplifier in the application of multifrequency eddy current testing (MECT). Switch-mode power amplifiers are known to have a very high efficiency, yet they have rarely been adopted in the instrumental development of MECT. In addition, switch-mode power amplifiers them…
▽ More
Efficiency and multisimultaneous-frequency (MSF) output capability are two major criteria characterizing the performance of a power amplifier in the application of multifrequency eddy current testing (MECT). Switch-mode power amplifiers are known to have a very high efficiency, yet they have rarely been adopted in the instrumental development of MECT. In addition, switch-mode power amplifiers themselves are lacking in the research literature for MSF capability. In this article, a Class D power amplifier is designed so as to address the two issues. An MSF selective harmonic elimination pulsewidth modulation method is proposed to generate alternating magnetic fields, which are rich in selected harmonics. A field-programmable-gate-array-based experimental system has been developed to verify the design. Results show that the proposed methodology is capable of generating high MSF currents in the transmitting coil with a low distortion of signal.
△ Less
Submitted 8 January, 2020; v1 submitted 23 August, 2019;
originally announced August 2019.
-
A Novel Compensation Algorithm for Thickness Measurement Immune to Lift-Off Variations Using Eddy Current Method
Authors:
Mingyang Lu,
Liyuan Yin,
Anthony J. Peyton,
Wuliang Yin
Abstract:
Lift-off variation causes errors in the eddy current thickness measurements of metallic plates. In this paper, we have developed an algorithm that can compensate for this variation and produce an index that is linked to the thickness, but is virtually independent of lift-off. This index, termed as the compensated peak frequency, can be obtained from the measured multifrequency inductance spectral…
▽ More
Lift-off variation causes errors in the eddy current thickness measurements of metallic plates. In this paper, we have developed an algorithm that can compensate for this variation and produce an index that is linked to the thickness, but is virtually independent of lift-off. This index, termed as the compensated peak frequency, can be obtained from the measured multifrequency inductance spectral data using the algorithm we developed in this paper. This method has been derived through mathematical manipulation and verified by both the simulation and experimental data. Accuracy in the thickness measurements at different lift-offs proved to be within 2%.
△ Less
Submitted 28 May, 2019;
originally announced May 2019.
-
Reducing the Lift-Off Effect on Permeability Measurement for Magnetic Plates From Multifrequency Induction Data
Authors:
Mingyang Lu,
Wenqian Zhu,
Liyuan Yin,
Anthony J. Peyton,
Wuliang Yin,
Zhigang Qu
Abstract:
Liftoff variation causes errors in eddy current measurement of nonmagnetic plates as well as magnetic plates. For nonmagnetic plates, previous work has been carried out to address the issue. In this paper, we follow a similar strategy, but try to reduce the lift-off effect on another index, zerocrossing frequency for magnetic plates. This modified index, termed as the compensated zero-crossing fre…
▽ More
Liftoff variation causes errors in eddy current measurement of nonmagnetic plates as well as magnetic plates. For nonmagnetic plates, previous work has been carried out to address the issue. In this paper, we follow a similar strategy, but try to reduce the lift-off effect on another index, zerocrossing frequency for magnetic plates. This modified index, termed as the compensated zero-crossing frequency, can be obtained from the measured multifrequency inductance spectral data using the algorithm we developed in this paper. Since the zero-crossing frequency can be compensated, the permeability of magnetic plates can finally be predicted by deriving the relation between the permeability and zero-crossing frequency from Dodd and Deeds method. We have derived the method through mathematical manipulation and verified it by both simulation and experimental data. The permeability error caused by liftoff can be reduced within 7.5%.
△ Less
Submitted 28 May, 2019;
originally announced May 2019.
-
Gaussian Processes, Median Statistics, Milky Way Rotation Curves
Authors:
Hai Yu,
Aman Singal,
Jacob Peyton,
Sara Crandall,
Bharat Ratra
Abstract:
We use the Iocco et al. (2015) compilation of 2,780 circular velocity measurements to analyze the Milky Way rotation curve. We find that the error bars for individual measurements are non-gaussian, and hence instead derive median statistics binned central circular velocity values and error bars from these data. We use these median statistics central values and error bars to fit the data to simple,…
▽ More
We use the Iocco et al. (2015) compilation of 2,780 circular velocity measurements to analyze the Milky Way rotation curve. We find that the error bars for individual measurements are non-gaussian, and hence instead derive median statistics binned central circular velocity values and error bars from these data. We use these median statistics central values and error bars to fit the data to simple, few parameter, rotation curve functions. These simple functions are unable to adequately capture the significant small scale spatial structure in these data and so provide poor fits. We introduce and use the Gaussian Processes (GP) method to capture this small scale structure and use it to derive Milky Way rotation curves from the binned median statistics circular velocity data. The GP method rotation curves have significant small-scale spatial structure superimposed on a broad rise to galactocentric radius $R\approx7$ kpc and a decline at larger $R$. We use the GP method median statistics rotation curve to measure the Oort $A$ and $B$ constants and other characteristic rotation curve quantities. We study correlations in the residual circular velocities (relative to the GP method rotation curve). Along with other evidence for azimuthal asymmetry of the Milky Way circular rotation velocity field, we find that larger residual circular velocities seem to favor parts of spiral arms.
△ Less
Submitted 4 March, 2019; v1 submitted 3 March, 2019;
originally announced March 2019.
-
Median Statistics Analysis of Deuterium Abundance Measurements and Spatial Curvature Constraints
Authors:
Jarred Penton,
Jacob Peyton,
Aasim Zahoor,
Bharat Ratra
Abstract:
Zavarygin et al. (2018) compiled a list of 15 deuterium abundance measurements, discarded two because the remaining 13 measurements are then consistent with gaussianity, and found that the weighted mean baryon density (Omega_b h^2) determined from the 13 measurements is mildly discrepant (1.6sigma) with that determined from the Planck 2015 cosmic microwave background anisotropy data in a flat cosm…
▽ More
Zavarygin et al. (2018) compiled a list of 15 deuterium abundance measurements, discarded two because the remaining 13 measurements are then consistent with gaussianity, and found that the weighted mean baryon density (Omega_b h^2) determined from the 13 measurements is mildly discrepant (1.6sigma) with that determined from the Planck 2015 cosmic microwave background anisotropy data in a flat cosmogony. We find that a median statistic central estimate of Omega_b h^2 from all 15 deuterium abundance measurements is a more accurate estimate, is very consistent with Omega_b h^2 estimated from Planck 2015 data in a flat cosmogony, but is about 2sigma lower than that found in a closed cosmogonical model from the Planck 2015 data.
△ Less
Submitted 4 August, 2018;
originally announced August 2018.
