-
Melting curve of black phosphorus: evidence for a solid-liquid-liquid triple point
Authors:
Hermann Muhammad,
Mohamed Mezouar,
Gaston Garbarino,
Laura Henry,
Tomasz Poręba,
Matteo Ceppatelli,
Manuel Serrano-Ruiz,
Maurizio Peruzzini,
Frédéric Datchi
Abstract:
Black phosphorus (bP) is a crystalline material that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of its pressure-temperature (P-T) phase diagram, and in particular, the slope and location of its melting curve is fundamental for better understanding the synthesis and stability conditions of this important mater…
▽ More
Black phosphorus (bP) is a crystalline material that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of its pressure-temperature (P-T) phase diagram, and in particular, the slope and location of its melting curve is fundamental for better understanding the synthesis and stability conditions of this important material. Despite several experimental studies, important uncertainties remain in the determination of this melting curve. Here we report accurate melting points measurements, using in situ high-temperature and high-pressure high-resolution synchrotron x-ray diffraction. In particular, we have employed an original and accurate pressure and temperature metrology based on the unique anisotropic P-T response of bP, that we used as sensor for the simultaneous determination of pressure and temperature up to 5 GPa and 1700 K. We confirmed the existence of and located a solid-liquid-liquid triple point at the intersection of the low- and high-pressure melting curves. Finally, we have characterized the irreversibility of the transformation in the low-pressure regime below 1 GPa, as the low-density liquid does not crystallize back to bP but into red phosphorus on temperature quenching.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Anisotropic thermo-mechanical response of layered hexagonal boron nitride and black phosphorus: application as a simultaneous pressure and temperature sensor
Authors:
Hermann Muhammad,
Mohamed Mezouar,
Gaston Garbarino,
Tomasz Poreba,
Giorgia Confalonieri,
Matteo Ceppatelli,
Manuel Serrano-Ruiz,
Maurizio Peruzzini,
Frédéric Datchi
Abstract:
Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of the thermal equations of state of hBN and bP is of great interest in the field of 2D materials for a better understanding of the anisotropic thermo-mechanical properties and exf…
▽ More
Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of the thermal equations of state of hBN and bP is of great interest in the field of 2D materials for a better understanding of the anisotropic thermo-mechanical properties and exfoliation mechanism of these materials. Despite several theoretical and experimental studies, important uncertainties remain in the determination of the thermoelastic parameters of hBN and bP. Here, we report accurate thermal expansion and compressibility measurements along the individual crystallographic axes, using in situ high-temperature and high-pressure high-resolution synchrotron X-ray diffraction. In particular, we have quantitatively determined the subtle variations of the in-plane thermo-mechanical parameters by subjecting these materials to hydrostatic pressure conditions and collecting a large number of data points in small pressure and temperature increments. Based on the anisotropic behavior of bP, we propose the use of this material as sensor for the simultaneous determination of pressure and temperature in the range 0-5 GPa, 298-1700 K.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Propagation of Visible Light in Nanostructured Niobium Stripes Embedded in a Dielectric Polymer
Authors:
F. Telesio,
F. Mezzadri,
M. Serrano-Ruiz,
M. Peruzzini,
F. Bisio,
S. Heun,
F. Fabbri
Abstract:
Nanometric metallic stripes allow the transmission of optical signals via the excitation and propagation of surface-localized evanescent electromagnetic waves, with important applications in the field of nano-photonics. Whereas this kind of plasmonic phenomena typically exploits noble metals, like Ag or Au, other materials can exhibit viable light-transport efficiency. In this work, we demonstrate…
▽ More
Nanometric metallic stripes allow the transmission of optical signals via the excitation and propagation of surface-localized evanescent electromagnetic waves, with important applications in the field of nano-photonics. Whereas this kind of plasmonic phenomena typically exploits noble metals, like Ag or Au, other materials can exhibit viable light-transport efficiency. In this work, we demonstrate the transport of visible light in nanometric niobium stripes coupled with a dielectric polymeric layer, exploiting the remotely-excited/detected Raman signal of black phosphorus (bP) as the probe. The light-transport mechanism is ascribed to the generation of surface plasmon polaritons at the Nb/polymer interface. The propagation length is limited due to the lossy nature of niobium in the optical range, but this material may allow the exploitation of specific functionalities that are absent in noble-metal counterparts.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Black Phosphorus n-type doping by Cu: a microscopic surface investigation
Authors:
Abhishek Kumar,
Francesca Telesio,
Deborah Prezzi,
Claudia Cardoso,
Alessandra Catellani,
Stiven Forti,
Camilla Coletti,
Manuel Serrano-Ruiz,
Maurizio Peruzzini,
Fabio Beltram,
Stefan Heun
Abstract:
We study surface charge transfer doping of exfoliated black phosphorus (bP) flakes by copper using scanning tunneling microscopy (STM) and spectroscopy (STS) at room temperature. The tunneling spectra reveal a gap in correspondence of Cu islands, which is attributed to Coulomb blockade phenomena. Moreover, using line spectroscopic measurements across small copper islands, we exploit the potential…
▽ More
We study surface charge transfer doping of exfoliated black phosphorus (bP) flakes by copper using scanning tunneling microscopy (STM) and spectroscopy (STS) at room temperature. The tunneling spectra reveal a gap in correspondence of Cu islands, which is attributed to Coulomb blockade phenomena. Moreover, using line spectroscopic measurements across small copper islands, we exploit the potential of the local investigation, showing that the n-type doping effect of copper on bP is short-ranged. These experimental results are substantiated by first-principles simulations, which quantify the role of cluster size for an effective n-type doping of bP and explain the Coulomb blockade by an electronic decoupling of the topmost bP layer from the underlying layers driven by the copper cluster. Our results provide novel understanding, difficult to retrieve by transport measurements, of the doping of bP by copper, which appears promising for the implementation of ultra-sharp p-n junctions in bP.
△ Less
Submitted 3 January, 2022;
originally announced January 2022.
-
Evidence of Josephson coupling in a few-layer black phosphorus planar Josephson junction
Authors:
Francesca Telesio,
Matteo Carrega,
Giulio Cappelli,
Andrea Iorio,
Alessandro Crippa,
Elia Strambini,
Francesco Giazotto,
Manuel Serrano-Ruiz,
Maurizio Peruzzini,
Stefan Heun
Abstract:
Setting up strong Josephson coupling in van der Waals materials in close proximity to superconductors offers several opportunities both to inspect fundamental physics and to develop novel cryogenic quantum technologies. Here we show evidence of Josephson coupling in a planar few-layer black Phosphorus junction. The planar geometry allows us to probe the junction behavior by means of external gates…
▽ More
Setting up strong Josephson coupling in van der Waals materials in close proximity to superconductors offers several opportunities both to inspect fundamental physics and to develop novel cryogenic quantum technologies. Here we show evidence of Josephson coupling in a planar few-layer black Phosphorus junction. The planar geometry allows us to probe the junction behavior by means of external gates, at different carrier concentrations. Clear signatures of Josephson coupling are demonstrated by measuring supercurrent flow through the junction at milli Kelvin temperatures. Manifestation of Fraunhofer pattern with a transverse magnetic field is also reported, confirming the Josephson coupling. These findings represent the first evidence of proximity Josephson coupling in a planar junction based on a van der Waals material beyond graphene and open the way to new studies, exploiting the peculiar properties of exfoliated black phosphorus thin flakes.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Enhanced ambient stability of exfoliated black phosphorus by passivation with nickel nanoparticles
Authors:
Maria Caporali,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Alberto Verdini,
Albano Cossaro,
Matteo Dal Miglio,
Andrea Goldoni,
Maurizio Peruzzini
Abstract:
Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In d…
▽ More
Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In detail, the behavior of the Ni-functionalized material exposed to ambient conditions in the dark is accurately studied by TEM (Transmission Electron Microscopy), Raman Spectroscopy, and high resolution X-ray Photoemission and Absorption Spectroscopy. These techniques provide a morphological and quantitative insight of the oxidation process taking place at the surface of the bP flakes. In the presence of Ni NPs, the decay time of 2D bP to phosphorus oxides is more than three time slower compared to pristine bP, demonstrating an improved structural stability within twenty months of observation.
△ Less
Submitted 1 August, 2019;
originally announced August 2019.
-
Ohmic contact engineering in few-layer black Phosphorus field effect transistors
Authors:
Francesca Telesio,
Gwenael le Gal,
Manuel Serrano-Ruiz,
Federico Prescimone,
Stefano Toffanin,
Maurizio Peruzzini,
Stefan Heun
Abstract:
Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material, different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen…
▽ More
Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material, different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen and moisture, since the presence of uncontrolled oxidation can substantially change the behavior of the contacts. In this study, we investigate the influence of the metal used for the contacts to bP against the variability between different flakes and different samples, using three of the most used metals as contacts: Chromium, Titanium, and Nickel. Using the transfer length method, from an analysis of ten devices, both at room temperature and at low temperature, Ni results to be the best metal for Ohmic contacts to bP, providing the lowest contact resistance and minimum scattering between different devices. Moreover, we investigate the gate dependence of the current-voltage characteristics of these devices. In the accumulation regime, we observe good linearity for all metals investigated.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
A Perspective on Recent Advances in Phosphorene Functionalization and its Application in Devices
Authors:
Maurizio Peruzzini,
Roberto Bini,
Margherita Bolognesi,
Maria Caporali,
Matteo Ceppatelli,
Francesca Cicogna,
Serena Coiai,
Stefan Heun,
Andrea Ienco,
Inigo Iglesias Benito,
Abhishek Kumar,
Gabriele Manca,
Elisa Passaglia,
Demetrio Scelta,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefano Toffanin,
Matteo Vanni
Abstract:
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential li…
▽ More
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in preparation, functionalization and use of phosphorene and its decorated derivatives. In particular, we discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behaviour of black phosphorus, as well as decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and new results collected in our laboratories.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Black Phosphorus/Palladium Nanohybrid: Unraveling the Nature of P-Pd Interaction and Application in Selective Hydrogenation
Authors:
Matteo Vanni,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Martina Banchelli,
Paolo Matteini,
Antonio Massilimiliano Mio,
Giuseppe Nicotra,
Corrado Spinella,
Stefano Caporali,
Andrea Giaccherini,
Francesco d'Acapito,
Maria Caporali,
Maurizio Peruzzini
Abstract:
The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interac…
▽ More
The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interaction comes from XAS measurements that find out a very short Pd-P distance of 2.26 Å proving for the first time the existence of an unprecedented Pd-P coordination bond of covalent nature. Additionally, the average Pd-P coordination number of about 1.7 reveals that bP acts as a polydentate phosphine ligand towards the surface Pd atoms of the nanoparticles, thus preventing their agglomeration and inferring structural stability. These unique properties result in a superior performance in the catalytic hydrogenation of chloronitroarenes to chloroaniline, where a higher chemoselectivity in comparison to other heterogeneous catalyst based on palladium has been observed.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Modelling Strategies for the Covalent Functionalization of 2D Phosphorene
Authors:
Andrea Ienco,
Gabriele Manca,
Maurizio Peruzzini,
Carlo Mealli
Abstract:
The paper is an excursus on potential acid-base adducts formed by an unsaturated main group or transition metal species and P atoms of phosphorene (P n ), which derives from the black phosphorus exfoliation. Various possibilities of attaining a realistic covalent functionalization of the 2D material have been examined via DFT solid state calculations. The distribution of neighbor P atoms at one si…
▽ More
The paper is an excursus on potential acid-base adducts formed by an unsaturated main group or transition metal species and P atoms of phosphorene (P n ), which derives from the black phosphorus exfoliation. Various possibilities of attaining a realistic covalent functionalization of the 2D material have been examined via DFT solid state calculations. The distribution of neighbor P atoms at one side of the sheet and the reciprocal directionalities of their lone pairs must be clearly understood to foreshadow the best possible acceptor reactants. Amongst the latter, the main group BH3 or I2 species have been examined for their intrinsic acidity, which favors the periodic mono-hapto anchoring at Pn atoms. The corresponding adducts are systematically compared with other molecular P donors from a phosphine to white phosphorus, P4. Significant variations emerge from the comparison of the band gaps in the adducts and the naked phosphorene with a possible electronic interpretation being offered. Then, the Pn covalent functionalization has been analyzed in relation to unsaturated metal fragments, which, by carrying one, two or three vacant sigma hybrids, may interact with a different number of adjacent P atoms. For the modelling, the concept of isolobal analogy is important for predicting the possible sets of external coligands at the metal, which may allow the anchoring at phosphorene with a variety of hapticities. Structural, electronic, spectroscopic and energy parameters underline the most relevant pros and cons of some new products at the 2D framework, which have never been experimentally characterized but appear to be reasonably stable.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
STM Study of Exfoliated Few Layer Black Phosphorus Annealed in Ultrahigh Vacuum
Authors:
Abhishek Kumar,
F. Telesio,
S. Forti,
A. Al-Temimy,
C. Coletti,
M. Serrano-Ruiz,
M. Caporali,
M. Peruzzini,
F. Beltram,
S. Heun
Abstract:
Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crys…
▽ More
Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crystal in situ. Here we present a study of surface modifications on exfoliated bP flakes upon consecutive annealing steps, up to 550 C, well above the sublimation temperature of bP. In particular, our attention is focused on the temperature range 375 C - 400 C, when sublimation starts, and a controlled desorption from the surface occurs alongside with the formation of characteristic well-aligned craters. There is an open debate in the literature about the crystallographic orientation of these craters, whether they align along the zigzag or the armchair direction. Thanks to the atomic resolution provided by STM, we are able to identify the orientation of the craters with respect to the bP crystal: the long axis of the craters is aligned along the zigzag direction of bP. This allows us to solve the controversy, and, moreover, to provide insight in the underlying desorption mechanism leading to crater formation.
△ Less
Submitted 28 August, 2018;
originally announced August 2018.
-
Non-Classical Longitudinal Magneto-Resistance in Anisotropic Black Phosphorus
Authors:
Francesca Telesio,
Nicholas Hemsworth,
William Dickerson,
Matei Petrescu,
Vahid Tayari,
Oulin Yu,
David Graf,
Manuel Serrano-Ruiz,
Maria Caporali,
Maurizio Peruzzini,
Matteo Carrega,
Thomas Szkopek,
Stefan Heun,
Guillaume Gervais
Abstract:
Resistivity measurements of a few-layer black phosphorus (bP) crystal in parallel magnetic fields up to 45 T are reported as a function of the angle between the in-plane field and the source-drain (S-D) axis of the device. The crystallographic directions of the bP crystal were determined by Raman spectroscopy, with the zigzag axis found within 5° of the S-D axis, and the armchair axis in the ortho…
▽ More
Resistivity measurements of a few-layer black phosphorus (bP) crystal in parallel magnetic fields up to 45 T are reported as a function of the angle between the in-plane field and the source-drain (S-D) axis of the device. The crystallographic directions of the bP crystal were determined by Raman spectroscopy, with the zigzag axis found within 5° of the S-D axis, and the armchair axis in the orthogonal planar direction. A transverse magneto-resistance (TMR) as well as a classically-forbidden longitudinal magneto-resistance (LMR) are observed. Both are found to be strongly anisotropic and non-monotonic with increasing in-plane field. Surprisingly, the relative magnitude (in %) of the positive LMR is larger than the TMR above $\sim$32 T. Considering the known anisotropy of bP whose zigzag and armchair effective masses differ by a factor of approximately seven, our experiment strongly suggests this LMR to be a consequence of the anisotropic Fermi surface of bP.
△ Less
Submitted 5 December, 2018; v1 submitted 2 August, 2018;
originally announced August 2018.
-
Polymer-based black phosphorus (bP) hybrid materials by in situ radical polymerization: an effective tool to exfoliate bP and stabilize bP nanoflakes
Authors:
Elisa Passaglia,
Francesca Cicogna,
Federica Costantino,
Serena Coiai,
Stefano Legnaioli,
Giulia Lorenzetti,
Silvia Borsacchi,
Marco Geppi,
Francesca Telesio,
Stefan Heun,
Andrea Ienco,
Manuel Serrano-Ruiz,
Maurizio Peruzzini
Abstract:
Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) towards both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes e…
▽ More
Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) towards both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes exhibit a significantly improved stability. The new materials have been prepared by different synthetic paths including: i) the mixing of conventionally liquid-phase exfoliated bP (in DMSO) with PMMA solution; ii) the direct exfoliation of bP in a polymeric solution; iii) the in situ radical polymerization after exfoliating bP in the liquid monomer (methyl methacrylate, MMA). This last methodology concerns the preparation of stable suspensions of bPn-MMA by sonication-assisted liquid phase exfoliation (LPE) of bP in the presence of MMA followed by radical polymerization. The hybrids characteristics have been compared in order to evaluate the bP dispersion and the effectiveness of the bPn interfacial interactions with polymer chains aimed at their long-term environmental stabilization. The passivation of bPn results particularly effective when the hybrid material is prepared by in situ polymerization. By using this synthetic methodology, the nanoflakes, even if with a gradient of dispersion (size of aggregates), preserve their chemical structure from oxidation (as proved by both Raman and 31P-Solid State NMR studies) and are particularly stable to air and UV light exposure.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
Phosphorus oxide gate dielectric for black phosphorus field effect transistors
Authors:
W. Dickerson,
V. Tayari,
I. Fakih,
A. Korinek,
M. Caporali,
M. Serrano-Ruiz,
M. Peruzzini,
S. Heun,
G. A. Botton,
T. Szkopek
Abstract:
The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of…
▽ More
The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of a POx layer grown by reactive ion etching followed by atomic layer deposition of Al2O3. We observe room temperature top-gate mobilities of 115 cm2/Vs in ambient conditions, which we attribute to the low defect density of the bP/POx interface.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Hybrid 2D Black Phosphorus/Polymer Materials: New Platforms for Device Fabrication
Authors:
Francesca Telesio,
Elisa Passaglia,
Francesca Cicogna,
Federica Costantino,
Manuel Serrano-Ruiz,
Maurizio Peruzzini,
Stefan Heun
Abstract:
Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, espec…
▽ More
Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, especially focusing on how the filler changes the polymeric matrix properties. Here we propose a complete change of perspective by using the hybrid nanocomposite material as a platform suitable to engineer the properties of the filler and to exploit its potential in the fabrication of devices. As a proof of concept of the versatility and potentiality of the new method, we applied this approach to prepare black phosphorus nanocomposites through its dispersion in poly (methyl methacrylate). Black phosphorus is a very interesting 2D material, whose application have so far been limited by its very high reactivity to oxygen and water. In this respect, we show that electronic-grade black phosphorus flakes, already embedded in a protecting matrix since their exfoliation from the bulk material, are endowed with significant increased stability, and can be further processed into devices without degrading their properties.
△ Less
Submitted 4 February, 2018;
originally announced February 2018.
-
Novel polystyrene-based nanocomposites by phosphorene dispersion
Authors:
Elisa Passaglia,
Francesca Cicogna,
Giulia Lorenzetti,
Stefano Legnaioli,
Maria Caporali,
Manuel Serrano-Ruiz,
Andrea Ienco,
Maurizio Peruzzini
Abstract:
Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phospho…
▽ More
Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phosphorus layers. TGA, DSC analysis as well as thermal oxidation and photo-degradation techniques were employed to investigate the thermal- and the photo-stability of the samples. The collected results evidenced better thermal and photostability of both polymer matrix and dispersed layered phosphorus, suggesting really interesting polymer-nanofiller synergic effects ascribable to the presence and the good dispersion of the 2D-nanomaterial.
△ Less
Submitted 14 February, 2017;
originally announced February 2017.
-
Decoration of exfoliated black phosphorus with nickel nanoparticles and application in catalysis
Authors:
Maria Caporali,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Giuseppe Nicotra,
Corrado Spinella,
Maurizio Peruzzini
Abstract:
Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after re…
▽ More
Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after recycling tests revealing the high stability of the nanohybrid.
△ Less
Submitted 28 August, 2017; v1 submitted 16 September, 2016;
originally announced September 2016.
-
Dephasing in strongly anisotropic black phosphorus
Authors:
N. Hemsworth,
V. Tayari,
F. Telesio,
S. Xiang,
S. Roddaro,
M. Caporali,
A. Ienco,
M. Serrano-Ruiz,
M. Peruzzini,
G. Gervais,
T. Szkopek,
S. Heun
Abstract:
Weak localization was observed and determined in a black phosphorus (bP) field-effect transistor 65 nm thick. The weak localization behaviour was found to be in excellent agreement with the Hikami-Larkin-Nagaoka model for fields up to 1~T, from which characteristic scattering lengths could be inferred. The dephasing length $L_φ$ was found to increase linearly with increasing hole density attaining…
▽ More
Weak localization was observed and determined in a black phosphorus (bP) field-effect transistor 65 nm thick. The weak localization behaviour was found to be in excellent agreement with the Hikami-Larkin-Nagaoka model for fields up to 1~T, from which characteristic scattering lengths could be inferred. The dephasing length $L_φ$ was found to increase linearly with increasing hole density attaining a maximum value of 55 nm at a hole density of approximately $10^{13} cm^{-2}$ inferred from the Hall effect. The temperature dependence of $L_φ$ was also investigated and above 1~K, it was found to decrease weaker than the $L_φ\propto T^{-\frac{1}{2}}$ dependence characteristic of electron-electron scattering in the presence of elastic scattering in two dimensions. Rather, the observed power law was found to be close to that observed previously in other quasi-one-dimensional systems such as metallic nanowires and carbon nanotubes. We attribute our result to the crystal structure of bP which host a `puckered' honeycomb lattice forming a strongly anisotropic medium
△ Less
Submitted 15 August, 2016; v1 submitted 28 July, 2016;
originally announced July 2016.
-
The role of water in the preparation and stabilization of high quality phosphorene flakes
Authors:
Manuel Serrano-Ruiz,
Maria Caporali,
Andrea Ienco,
Vincenzo Piazza,
Stefan Heun,
Maurizio Peruzzini
Abstract:
Water is believed to be harmful for the stability of phosphorene.On the contrary, the presence of small amount of water allows the synthesis of high-quality material in liquid exfoliation of black phosphorus using dimethylsulfoxide as solvent. A phosphorus/water molar ratio between 1.5 and 14 maximizes the quality of the phosphorene flakes and their stability.
Water is believed to be harmful for the stability of phosphorene.On the contrary, the presence of small amount of water allows the synthesis of high-quality material in liquid exfoliation of black phosphorus using dimethylsulfoxide as solvent. A phosphorus/water molar ratio between 1.5 and 14 maximizes the quality of the phosphorene flakes and their stability.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.
