-
Stable thrust on a finite-sized magnet above a Meissner superconducting torus
Authors:
Jose-Luis Perez-Diaz,
Efren Diez-Jimenez,
Ignacio Valiente-Blanco,
Javier Herrero-de-Vicente
Abstract:
Forces and torques exerted by a superconducting torus on a permanent magnet have been mapped. It is demonstrated that stable orbits exist. Moreover, provided that the magnet remains in any of these orbits, the first critical field in the superconductor is never overpassed and the superconductor remains in the Meissner state. The consequent absence of hysteresis makes these kinds of device perfect…
▽ More
Forces and torques exerted by a superconducting torus on a permanent magnet have been mapped. It is demonstrated that stable orbits exist. Moreover, provided that the magnet remains in any of these orbits, the first critical field in the superconductor is never overpassed and the superconductor remains in the Meissner state. The consequent absence of hysteresis makes these kinds of device perfect candidates for non-frictional bearings or gyroscopes.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Dynamics of a Superconducting Linear Slider
Authors:
I. Valiente-Blanco,
J. L. Perez-Diaz,
E. Diez-Jimenez
Abstract:
In this paper, the dynamic behavior of a one degree-of-freedom (DOF) contactless linear slider based on superconducting magnetic levitation is experimentally analyzed. The device is intended for precision positioning of an optic mirror in cryogenic environments. Different prototypes of this device have been tested at cryogenic temperatures (77 K), and their mechanical behavior characterized in the…
▽ More
In this paper, the dynamic behavior of a one degree-of-freedom (DOF) contactless linear slider based on superconducting magnetic levitation is experimentally analyzed. The device is intended for precision positioning of an optic mirror in cryogenic environments. Different prototypes of this device have been tested at cryogenic temperatures (77 K), and their mechanical behavior characterized in the sliding direction for forced and unforced oscillations. Experimental results reveal that the slider is self-stable at the initial equilibrium position and the dynamic behavior fits well an underdamped harmonic oscillator. Finally, the device showed great potential for horizontal vibration isolation, acting as a low-pass filter with a resonance at about 0.9 Hz
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Improving Resolution and Run Outs of a Superconducting Noncontact Device for Precision Positioning
Authors:
I. Valiente-Blanco,
E. Diez-Jimenez,
J. Sanchez-Garcia-Casarrubios,
J. L. Perez-Diaz
Abstract:
This paper describes the improvement of the performance of a long-stroke high-precision positioning slider suitable for cryogenic environments due to the application of a set of design rules given in a previous paper. The device, based on superconducting magnetic levitation, is self-stable and does notmake contact between the slider and the guideline, avoiding tribological and lubrication problems…
▽ More
This paper describes the improvement of the performance of a long-stroke high-precision positioning slider suitable for cryogenic environments due to the application of a set of design rules given in a previous paper. The device, based on superconducting magnetic levitation, is self-stable and does notmake contact between the slider and the guideline, avoiding tribological and lubrication problems associated with cryogenics.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Characterization and Improvement of Axial and Radial Stiffness of Contactless Thrust Superconducting Magnetic Bearings
Authors:
Ignacio Valiente-Blanco,
Efren Diez-Jimenez,
Cristian Cristache,
Marco A. Alvarez-Valenzuela,
Jose L. Perez-Diaz
Abstract:
Contactless bearings based on both permanent magnets and superconducting magnetic levitation are interesting to avoid all the tribological problems associated with contact at very low temperature. Superconducting magnetic bearings (SMBs) find application in mechanical engineering where lack of contact is a requirement or an advantage. In comparison with active magnetic bearings (AMBs), SMBs solve…
▽ More
Contactless bearings based on both permanent magnets and superconducting magnetic levitation are interesting to avoid all the tribological problems associated with contact at very low temperature. Superconducting magnetic bearings (SMBs) find application in mechanical engineering where lack of contact is a requirement or an advantage. In comparison with active magnetic bearings (AMBs), SMBs solve their inherent instability and require less complex control strategies and electronics. However, one of the current limitations is their low mechanical stiffness. Force densities are considerably lower in SMB than the state-of-art values for AMB. This fact certainly limits their applications. In this chapter, we summarize some key strategies for the improvement of radial and axial stiffness among with a description of some SMB in terms of load capability or force relaxation and discuss their advantages and disadvantages.A set of rules for the mechanical design of high-stiffness thrust superconducting magnetic bearings are proposed and experimentally demonstrated. Keywords Low-temperature tribology
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Superconducting Noncontact Device for Precision Positioning in Cryogenic Environments
Authors:
Jose Luis Perez-Diaz,
Ignacio Valiente-Blanco,
Efren Diez-Jimenez,
Juan Sanchez-Garcia-Casarrubios
Abstract:
In this paper, a noncontact linear positioner based on superconducting magnetic levitation for high-precision positioning has been tested under cryogenic conditions
In this paper, a noncontact linear positioner based on superconducting magnetic levitation for high-precision positioning has been tested under cryogenic conditions
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Engineering and performance of a contactless linear slider based on superconducting magnetic levitation for precision positioning
Authors:
Ignacio Valiente-Blanco,
Efren Diez Jimenez,
Jose Luis Perez-Diaz
Abstract:
In this paper, a contactless linear slider for precision positioning able to operate in cryogenic environments is presented. The device, based on superconducting magnetic levitation, does not present contact between the slider (composed of a permanent magnet) and the guideline (made of high-temperature superconducting disks) of the mechanism, thereby avoiding any tribological problems. Moreover, t…
▽ More
In this paper, a contactless linear slider for precision positioning able to operate in cryogenic environments is presented. The device, based on superconducting magnetic levitation, does not present contact between the slider (composed of a permanent magnet) and the guideline (made of high-temperature superconducting disks) of the mechanism, thereby avoiding any tribological problems. Moreover, the slider is self-stable and the superconductors provide inherent guidance to the permanent magnet in the sliding DoF due to the high translational symmetry of the magnetic field that leads to low power consumption. A sub-micrometre resolution and a symmetric stroke over 9 mm have been demonstrated at cryogenic temperatures. In addition, a set of design rules for this kind of mechanism has been proposed and experimentally validated. These rules demonstrate that the performance of the device can be tuned just by modifying some geometrical parameters of the mechanism. In this way, the sensitivity and stiffness, resolution, angular run outs and power consumption can be adjusted for different applications and requirements.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Non-contact linear slider for cryogenic environment
Authors:
Jose-Luis Perez-Diaz,
Juan Carlos Garcia-Prada,
Efren Diez-Jimenez,
Ignacio Valiente-Blanco a,
Berit Sander,
Lauri Timm,
Juan Sanchez-Garcia-Casarrubios,
Javier Serrano,
Fernando Romera,
Heribert Argelaguet-Vilaseca,
David Gonzalez-de-Maria
Abstract:
A non-contact linear slider based on stable superconducting magnetic levitation with a long permanent magnet as a slider and two fixed superconducting disks which define the slide way has been designed, built and tested. The slider can be moved stably along a stroke of 11.5mm by supplying a low current in a coil located at the end of the stroke while the levitation remains stable providing a relia…
▽ More
A non-contact linear slider based on stable superconducting magnetic levitation with a long permanent magnet as a slider and two fixed superconducting disks which define the slide way has been designed, built and tested. The slider can be moved stably along a stroke of 11.5mm by supplying a low current in a coil located at the end of the stroke while the levitation remains stable providing a reliable mechanism for linear displacement in a cryogenic environment. The response is linear with a sensitivity of 52 μm/mA for displacements lower than 6 mm. Run out, pitch, yaw and roll have been measured demonstrating an overall good performance. In all cases the measured hysteresis was lower than 250 μm and the measured run out was also lower than 250 μm both for Y and Z axis. Roll and yaw were always below 300 μrad, that is one order of magnitude lower than the pitch (4500 μrad).
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Optimisation models for the day-ahead energy and reserve scheduling of a hybrid wind-battery virtual power plant
Authors:
Daniel Fernández-Muñoz,
Juan I. Pérez-Díaz
Abstract:
This work presents a suite of two optimisation models for the short-term scheduling and redispatch of a virtual power plant (VPP) composed of a wind farm and a Li-ion battery, that participates in the day-ahead energy and secondary regulation reserve markets of the Iberian electricity market. First, a two-stage stochastic mixed-integer linear programming model is used to obtain the VPP's generatio…
▽ More
This work presents a suite of two optimisation models for the short-term scheduling and redispatch of a virtual power plant (VPP) composed of a wind farm and a Li-ion battery, that participates in the day-ahead energy and secondary regulation reserve markets of the Iberian electricity market. First, a two-stage stochastic mixed-integer linear programming model is used to obtain the VPP's generation and reserve schedule and the opportunity cost of the energy stored in the battery. The model has an hourly resolution and a look-ahead period beyond the markets' scheduling horizon and considers the hourly battery degradation costs as a function of both the depth of discharge and the discharge rate. Different strategies are evaluated to forecast the real-time use of the committed secondary regulation reserves. Second, a deterministic MILP model is used to determine the redispatch of the VPP using as input the generation and reserve schedule and the VPP's storage opportunity cost provided by the former model and is executed on an hourly rolling basis. The results obtained show that the proposed models are effective for the short-term scheduling and redispatch of the VPP used with a low computational time, making them tractable and practical for their daily use.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Ice Surface Entropy Induction by Humidity or How Humidity Prompts Freezing
Authors:
Jose Luis Perez-Diaz,
Marco Antonio Alvarez-Valenzuela,
Juan Sanchez-Garcia-Casarrubios,
Sergio Jimenez-Lopez
Abstract:
In this work we measured Surface Energy and Freezing Temperature of supercooled water droplets in air. We find that freezing of water droplets is triggered at the water-air interface and that freezing progresses faster on the surface than in the bulk. The Freezing Point of water droplets is strongly depressed by dryness in air and how humidity triggers freezing. Additionally it is shown to be a Su…
▽ More
In this work we measured Surface Energy and Freezing Temperature of supercooled water droplets in air. We find that freezing of water droplets is triggered at the water-air interface and that freezing progresses faster on the surface than in the bulk. The Freezing Point of water droplets is strongly depressed by dryness in air and how humidity triggers freezing. Additionally it is shown to be a Surface phenomenon related to a transfer of Entropy from water vapour to the surface of ice.
△ Less
Submitted 22 September, 2015;
originally announced September 2015.
