Showing 1–50 of 231 results for author: Peréz, S

Surprising Variation of Gamma Rays from the Sun over the Solar Cycle Revealed with Fermi-LAT

Authors: A. Acharyya, A. Adelfio, M. Ajello, L. Baldini, C. Bartolini, D. Bastieri, J. Becerra Gonzalez, R. Bellazzini, B. Berenji, E. Bissaldi, R. D. Blandford, R. Bonino, E. Bottacini, S. Buson, R. A. Cameron, P. A. Caraveo, F. Casaburo, F. Casini, E. Cavazzuti, D. Cerasole, S. Ciprini, G. Cozzolongo, P. Cristarella Orestano, A. Cuoco, S. Cutini , et al. (78 additional authors not shown)

Abstract: The steady-state gamma-ray emission from the Sun is thought to consist of two emission components due to interactions with Galactic cosmic rays: (1) a hadronic component covering the solar disk, and (2) a leptonic component peaking at the solar edge and extending into the heliosphere. The flux of these components is expected to vary with the 11-year solar cycle, being highest during solar minimum… ▽ More The steady-state gamma-ray emission from the Sun is thought to consist of two emission components due to interactions with Galactic cosmic rays: (1) a hadronic component covering the solar disk, and (2) a leptonic component peaking at the solar edge and extending into the heliosphere. The flux of these components is expected to vary with the 11-year solar cycle, being highest during solar minimum and lowest during solar maximum, because it is correlated with the cosmic-ray flux. No study has yet analyzed the flux variation of the two components separately over solar cycles. In this work, we measure the temporal variations of the flux of each component over 15 years of Fermi Large Area Telescope observations and compare them with the sunspot number and Galactic cosmic-ray flux from AMS-02 near the Earth. We find that the flux variation of the disk anticorrelates with solar activity and correlates with cosmic-ray protons, confirming its emission mechanism. The flux variation of the extended component anticorrelates with solar activity only until mid 2012. After that, we no longer observe any correlation or anticorrelation, even with the CR electron flux. This most likely suggests that cosmic-ray transport and modulation in the inner heliosphere are unexpectedly complex and different for electrons and protons or, alternatively, the presence of an additional, unknown component of gamma rays or cosmic rays. These findings impact space weather research and emphasize the need for close monitoring of Cycle 25 and the ongoing polarity reversal. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 9 pages. Contact authors: Nicola Giglietto, Elena Orlando, Silvia Raino'

Spotting the Unexpected (STU): A 3D LiDAR Dataset for Anomaly Segmentation in Autonomous Driving

Authors: Alexey Nekrasov, Malcolm Burdorf, Stewart Worrall, Bastian Leibe, Julie Stephany Berrio Perez

Abstract: To operate safely, autonomous vehicles (AVs) need to detect and handle unexpected objects or anomalies on the road. While significant research exists for anomaly detection and segmentation in 2D, research progress in 3D is underexplored. Existing datasets lack high-quality multimodal data that are typically found in AVs. This paper presents a novel dataset for anomaly segmentation in driving scena… ▽ More To operate safely, autonomous vehicles (AVs) need to detect and handle unexpected objects or anomalies on the road. While significant research exists for anomaly detection and segmentation in 2D, research progress in 3D is underexplored. Existing datasets lack high-quality multimodal data that are typically found in AVs. This paper presents a novel dataset for anomaly segmentation in driving scenarios. To the best of our knowledge, it is the first publicly available dataset focused on road anomaly segmentation with dense 3D semantic labeling, incorporating both LiDAR and camera data, as well as sequential information to enable anomaly detection across various ranges. This capability is critical for the safe navigation of autonomous vehicles. We adapted and evaluated several baseline models for 3D segmentation, highlighting the challenges of 3D anomaly detection in driving environments. Our dataset and evaluation code will be openly available, facilitating the testing and performance comparison of different approaches. △ Less

Submitted 4 May, 2025; originally announced May 2025.

Comments: Accepted for publication at CVPR 2025. Project page: https://www.vision.rwth-aachen.de/stu-dataset

Confirmation of a ring structure in the disk around MP Mus (PDS 66) with ALMA Band 7 observations

Authors: Aurora Aguayo, Claudio Caceres, Zhen Guo, Matthias R. Schreiber, Álvaro Ribas, Joel H. Kastner, Lucas A. Cieza, Sebastián Pérez, Héctor Cánovas, Daniela Rojas Bozza, D. Annie Dickson-Vandervelde, William Grimble, Alejandro Santamaría-Miranda

Abstract: Young stellar objects (YSOs) are surrounded by protoplanetary disks, which are the birthplace of young planets. Ring and gap structures are observed among evolved protoplanetary disks, often interpreted as a consequence of planet formation. The pre-Main Sequence (pre-MS) star MP Mus hosts one of the few known examples of protoplanetary disks within ~100 pc. Previously, a disk ring structure, with… ▽ More Young stellar objects (YSOs) are surrounded by protoplanetary disks, which are the birthplace of young planets. Ring and gap structures are observed among evolved protoplanetary disks, often interpreted as a consequence of planet formation. The pre-Main Sequence (pre-MS) star MP Mus hosts one of the few known examples of protoplanetary disks within ~100 pc. Previously, a disk ring structure, with a radius of 80-85 au, was detected in scattered light via near-infrared coronographic/polarimetric imaging. This ring structure may be indicative of the disk clearing process. Although such ring structures were not seen in the ALMA Band 6 images, some features were detected at $\sim$50 au. In this paper, we analyzed new ALMA Band 7 observations of MP Mus in order to investigate the details of its disk substructures. By subtracting the continuum profile generated from Band 7 data, we discovered a ring structure in the Band 7 dust continuum image at $\sim$50 au. We calculated the overall dust mass as $28.4\pm2.8 M_{\oplus}$ at 0.89 mm and $26.3\pm2.6 M_{\oplus}$ at 1.3 mm and the millimeter spectral index $α_{0.89-1.3mm} \sim 2.2 \pm 0.3$ between 0.89 mm and 1.3 mm. Moreover, we display the spatial distribution of the spectral index ($α_{mm}$), estimating values ranging from 1.3 at the inner disk to 4.0 at a large radius. Additionally, we observed an extended gas disk up to $\sim$120 au, in contrast with a compact continuum millimeter extent of $\sim$60 au. We conclude that there are strong indicators for an active radial drift process within the disk. However, we cannot discard the possibility of a dust evolution process and a grain growth process as responsible for the outer disk structures observed in the ALMA continuum imaging. △ Less

Submitted 24 April, 2025; originally announced April 2025.

Comments: 12 pages, 10 figures and 3 Tables. Paper accepted for publication in A&A

The Ophiuchus DIsk Survey Employing ALMA (ODISEA): A Unified Evolutionary Sequence of Planet-Driven Substructures Explaining the Diversity of Disk Morphologies

Authors: Santiago Orcajo, Lucas A. Cieza, Octavio Guilera, Sebastian Perez, Fernando R. Rannou, Camilo Gonzalez-Ruilova, Grace Batalla-Falcon, Trisha Bhowmik, Prachi Chavan, Simon Casassus, Anuroop Dasgupta, Kevin Diaz, Jose L. Gomez, Antonio S. Hales, J. M. Miley, Marcelo M. Miller Bertolami, P. H. Nogueira, Maria Paula Ronco, Dary Ruiz-Rodriguez, Anibal Sierra, Julia Venturini, Philipp Weber, Jonathan P. Williams, Alice Zurlo

Abstract: Understanding the origin of substructures in protoplanetary disks and their connection to planet formation is currently one of the main challenges in astrophysics. While some disks appear smooth, most exhibit diverse substructures such as gaps, rings, or inner cavities, with varying brightness and depth. As part of the Ophiuchus Disk Survey Employing ALMA (ODISEA), we previously proposed an evolut… ▽ More Understanding the origin of substructures in protoplanetary disks and their connection to planet formation is currently one of the main challenges in astrophysics. While some disks appear smooth, most exhibit diverse substructures such as gaps, rings, or inner cavities, with varying brightness and depth. As part of the Ophiuchus Disk Survey Employing ALMA (ODISEA), we previously proposed an evolutionary sequence to unify this diversity, driven by the formation of giant planets through core accretion and subsequent planet-disk interactions. By combining the disk evolution and planet formation code PLANETALP with the radiative transfer code RADMC-3D, we have now reproduced the key aspects of the proposed evolutionary sequence. Starting with a smooth disk (like e.g., WLY 2-63), we modeled the evolution of a fiducial disk with a 1 Jupiter-mass planet at 57 au. Within a few hundreds of orbits, a narrow gap forms, resembling ISO-Oph 17. By $\sim$0.1 Myr, the gap widens, and dust accumulates at the cavity edge, producing a structure similar to Elias 2-24. At $\sim$0.4 Myr, the disk evolves further into a morphology akin to DoAr 44, characterized by a smaller inner disk and a brighter inner rim. By $\sim$1 Myr, the system transitions to a single narrow ring, resembling RXJ1633.9-2442. This line of work strongly supports the planetary origin of substructures and enables the possibility of identifying a population of planets that is currently beyond the reach of more direct detection techniques. △ Less

Submitted 19 April, 2025; originally announced April 2025.

Comments: 18 pages, 5 figures, 1 video in mp4

Timing the Escape of a Caged Electron

Authors: Connor Fields, Aleksandra Foerster, Sadegh Ghaderzadeh, Ilya Popov, Bang Huynh, Filipe Junqueira, Tyler James, Sofia Alonso Perez, David A Duncan, Tien-Lin Lee, Yitao Wang, Sally Bloodworth, Gabriela Hoffman, Mark Walkey, Richard J Whitby, Malcolm H Levitt, Brian Kiraly, James N O'Shea, Elena Besley, Philip Moriarty

Abstract: Charge transfer is fundamentally dependent on the overlap of the orbitals comprising the transport pathway. This has key implications for molecular, nanoscale, and quantum technologies, for which delocalization (and decoherence) rates are essential figures of merit. Here, we apply the core hole clock technique - an energy-domain variant of ultrafast spectroscopy - to probe the delocalization of a… ▽ More Charge transfer is fundamentally dependent on the overlap of the orbitals comprising the transport pathway. This has key implications for molecular, nanoscale, and quantum technologies, for which delocalization (and decoherence) rates are essential figures of merit. Here, we apply the core hole clock technique - an energy-domain variant of ultrafast spectroscopy - to probe the delocalization of a photoexcited electron inside a closed molecular cage, namely the Ar 2p54s1 state of Ar@C60. Despite marginal frontier orbital mixing in the ground configuration, almost 80% of the excited state density is found outside the buckyball due to the formation of a markedly diffuse hybrid orbital. Far from isolating the intracage excitation, the surrounding fullerene is instead a remarkably efficient conduit for electron transfer: we measure characteristic delocalization times of 6.6 $\pm$ 0.3 fs and $\lesssim$ 500 attoseconds, respectively, for a 3D Ar@C60 film and a 2D monolayer on Ag(111). △ Less

Submitted 9 April, 2025; originally announced April 2025.

A Multi-Wavelength Study of the Dynamic Environment surrounding the FUor V960 Mon

Authors: Philipp Weber, Silvio Ulloa, Sebastián Pérez, James Miley, Lucas Cieza, Sergei Nayakshin, Alice Zurlo, Hauyu Baobab Liu, Fernando Cruz-Sáenz de Miera, Antonio Hales, Antonio Garufi, Dimitris Stamatellos, Ágnes Kóspál, Viviana Guzmán

Abstract: The evolution of young stars and planet-forming environments is intrinsically linked to their nascent surroundings. This is particularly evident for FU Orionis (FUor) objects$-$a class of young protostars known for dramatic outbursts resulting in significant increases in brightness. We present a case study of V960 Mon, an FUor that has recently been found to show signs of a fragmenting spiral arm,… ▽ More The evolution of young stars and planet-forming environments is intrinsically linked to their nascent surroundings. This is particularly evident for FU Orionis (FUor) objects$-$a class of young protostars known for dramatic outbursts resulting in significant increases in brightness. We present a case study of V960 Mon, an FUor that has recently been found to show signs of a fragmenting spiral arm, potentially connected to planet formation. Our study explores the large-scale environment ($10^3-10^4$ au) and incorporates ALMA band 3, band 4 and band 6 continuum data, molecular emissions from $^{12}$CO, $^{13}$CO, C$^{18}$O, SiO, DCO$^+$, N$_2$D$^+$ and DCN, alongside optical and near-infrared observations from VLT/MUSE and VLT/SPHERE. We map a region of 20" across where we find tantalizing emissions that provide a unique view of a young group of protostars, including the discovery of a class-0 protostar to the east of the FUor. The $^{12}$CO and SiO tracers suggest that this object is at the base of an outflow, potentially impacting the surrounding medium. The MUSE and SPHERE observations indicate the presence of an elongated feature towards a prominent source to the southeast that may represent interaction between V960 Mon and its surrounding. Moreover, the C$^{18}$O emission overlaps with the clumps of the detected fragmenting spiral arm. These findings provide the strongest evidence to date for a connection between infalling material, fragmentation, and the intensity outburst of a protostar. Our case study highlights the complex interactions between young stars and their surroundings that drive the evolution of the planet forming environment. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: Accepted by ApJ, 5 April 2025; 20 pages, 11 figures

When Cubic Law and Darcy Fail: Correcting Model Misspecification in Fracture Conductivities

Authors: Sarah Perez, Florian Doster, Julien Maes, Hannah Menke, Ahmed ElSheikh, Andreas Busch

Abstract: Uncertainties in the subsurface challenge reliable leakage risk assessments and long-term integrity of CO2 storage. Fault zones, characterised by multi-scale heterogeneities, are critical pathways for leakage and suffer from significant data uncertainties due to unresolved features. Understanding the multi-scale uncertainties in estimating fracture network conductivity is essential for mitigating… ▽ More Uncertainties in the subsurface challenge reliable leakage risk assessments and long-term integrity of CO2 storage. Fault zones, characterised by multi-scale heterogeneities, are critical pathways for leakage and suffer from significant data uncertainties due to unresolved features. Understanding the multi-scale uncertainties in estimating fracture network conductivity is essential for mitigating leakage risks and ensuring reliable modelling of upscaled fault leakage rates. However, current models fail to capture all fault zone heterogeneity, particularly fracture surface roughness effects on fluid migration. Simplified assumptions, such as the Cubic Law based on mechanical aperture measurements, lead to erroneous models known as model misspecifications and introduce modelling uncertainty in leakage predictions. Here, we develop an AI-driven framework to address data uncertainties and correct model misspecifications in estimating fracture conductivities. By automatically integrating small-scale uncertainties, including fracture surface roughness, and leveraging their interactions across scales, we improve upon traditional empirical corrections. We combine physics-based constraints with adaptive, data-driven and geometric corrections to infer the hydraulic aperture governing fluid flow in fractures with varying roughness. This approach generates reliable local permeability maps that account for roughness effects and discrepancies between mechanical and hydraulic apertures, accurately reflecting overall fracture conductivity. By propagating uncertainties from individual fractures to network scales, our approach will support robust calibration of conductivity ranges for fault leakage sensitivity analyses, not only resolving uncertainties in fracture-scale modelling but also enabling efficient integration into larger-scale simulations to enhance predictions for subsurface CO2 storage. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Design Initiative for a 10 TeV pCM Wakefield Collider

Authors: Spencer Gessner, Jens Osterhoff, Carl A. Lindstrøm, Kevin Cassou, Simone Pagan Griso, Jenny List, Erik Adli, Brian Foster, John Palastro, Elena Donegani, Moses Chung, Mikhail Polyanskiy, Lindsey Gray, Igor Pogorelsky, Gongxiaohui Chen, Gianluca Sarri, Brian Beaudoin, Ferdinand Willeke, David Bruhwiler, Joseph Grames, Yuan Shi, Robert Szafron, Angira Rastogi, Alexander Knetsch, Xueying Lu , et al. (176 additional authors not shown)

Abstract: This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress re… ▽ More This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider. △ Less

Submitted 31 March, 2025; v1 submitted 26 March, 2025; originally announced March 2025.

Comments: Contribution prepared for the 2025 update of the European Strategy for Particle Physics

An LLM-Based Approach for Insight Generation in Data Analysis

Authors: Alberto Sánchez Pérez, Alaa Boukhary, Paolo Papotti, Luis Castejón Lozano, Adam Elwood

Abstract: Generating insightful and actionable information from databases is critical in data analysis. This paper introduces a novel approach using Large Language Models (LLMs) to automatically generate textual insights. Given a multi-table database as input, our method leverages LLMs to produce concise, text-based insights that reflect interesting patterns in the tables. Our framework includes a Hypothesi… ▽ More Generating insightful and actionable information from databases is critical in data analysis. This paper introduces a novel approach using Large Language Models (LLMs) to automatically generate textual insights. Given a multi-table database as input, our method leverages LLMs to produce concise, text-based insights that reflect interesting patterns in the tables. Our framework includes a Hypothesis Generator to formulate domain-relevant questions, a Query Agent to answer such questions by generating SQL queries against a database, and a Summarization module to verbalize the insights. The insights are evaluated for both correctness and subjective insightfulness using a hybrid model of human judgment and automated metrics. Experimental results on public and enterprise databases demonstrate that our approach generates more insightful insights than other approaches while maintaining correctness. △ Less

Submitted 20 February, 2025; originally announced March 2025.

Comments: Accepted for publication at NAACL 2025

Object State Estimation Through Robotic Active Interaction for Biological Autonomous Drilling

Authors: Xiaofeng Lin, Enduo Zhao, Saúl Alexis Heredia Pérez, Kanako Harada

Abstract: Estimating the state of biological specimens is challenging due to limited observation through microscopic vision. For instance, during mouse skull drilling, the appearance alters little when thinning bone tissue because of its semi-transparent property and the high-magnification microscopic vision. To obtain the object's state, we introduce an object state estimation method for biological specime… ▽ More Estimating the state of biological specimens is challenging due to limited observation through microscopic vision. For instance, during mouse skull drilling, the appearance alters little when thinning bone tissue because of its semi-transparent property and the high-magnification microscopic vision. To obtain the object's state, we introduce an object state estimation method for biological specimens through active interaction based on the deflection. The method is integrated to enhance the autonomous drilling system developed in our previous work. The method and integrated system were evaluated through 12 autonomous eggshell drilling experiment trials. The results show that the system achieved a 91.7% successful ratio and 75% detachable ratio, showcasing its potential applicability in more complex surgical procedures such as mouse skull craniotomy. This research paves the way for further development of autonomous robotic systems capable of estimating the object's state through active interaction. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Comments: The first and second authors contribute equally to this research. 6 pages, 5 figures, submitted to RA-L

Characterization of proton-induced damage in thick, p-channel skipper-CCDs

Authors: Brenda A. Cervantes-Vergara, Santiago E. Perez, Claudio R. Chavez, Fernando Chierchie, Brandon Roach, Juan Estrada, Alex Drlica-Wagner

Abstract: In this work, we characterize the radiation-induced damage in two thick, p-channel skipper-CCDs irradiated unbiased and at room temperature with 217-MeV protons. We evaluate the overall performance of the sensors and demonstrate their single-electron/single-photon sensitivity after receiving a fluence on the order of 10$^{10}$~protons/cm$^2$. Using the pocket-pumping technique, we quantify and cha… ▽ More In this work, we characterize the radiation-induced damage in two thick, p-channel skipper-CCDs irradiated unbiased and at room temperature with 217-MeV protons. We evaluate the overall performance of the sensors and demonstrate their single-electron/single-photon sensitivity after receiving a fluence on the order of 10$^{10}$~protons/cm$^2$. Using the pocket-pumping technique, we quantify and characterize the proton-induced defects from displacement damage. We report an overall trap density of 0.134~traps/pixel for a displacement damage dose of $2.3\times10^7$~MeV/g. Three main proton-induced trap species were identified, V$_2$, C$_i$O$_i$ and V$_n$O$_m$, and their characteristic trap energies and cross sections were extracted. We found that while divacancies are the most common proton-induced defects, C$_i$O$_i$ defects have a greater impact on charge integrity at typical operating temperatures because their emission-time constants are comparable or larger than typical readout times. To estimate ionization damage, we measure the characteristic output transistor curves. We found no threshold voltage shifts after irradiation. Our results highlight the potential of skipper-CCDs for applications requiring high-radiation tolerance and can be used to find the operating conditions in which effects of radiation-induced damage are mitigated. △ Less

Submitted 22 February, 2025; originally announced February 2025.

Mixed Signals: A Diverse Point Cloud Dataset for Heterogeneous LiDAR V2X Collaboration

Authors: Katie Z Luo, Minh-Quan Dao, Zhenzhen Liu, Mark Campbell, Wei-Lun Chao, Kilian Q. Weinberger, Ezio Malis, Vincent Fremont, Bharath Hariharan, Mao Shan, Stewart Worrall, Julie Stephany Berrio Perez

Abstract: Vehicle-to-everything (V2X) collaborative perception has emerged as a promising solution to address the limitations of single-vehicle perception systems. However, existing V2X datasets are limited in scope, diversity, and quality. To address these gaps, we present Mixed Signals, a comprehensive V2X dataset featuring 45.1k point clouds and 240.6k bounding boxes collected from three connected autono… ▽ More Vehicle-to-everything (V2X) collaborative perception has emerged as a promising solution to address the limitations of single-vehicle perception systems. However, existing V2X datasets are limited in scope, diversity, and quality. To address these gaps, we present Mixed Signals, a comprehensive V2X dataset featuring 45.1k point clouds and 240.6k bounding boxes collected from three connected autonomous vehicles (CAVs) equipped with two different types of LiDAR sensors, plus a roadside unit with dual LiDARs. Our dataset provides precisely aligned point clouds and bounding box annotations across 10 classes, ensuring reliable data for perception training. We provide detailed statistical analysis on the quality of our dataset and extensively benchmark existing V2X methods on it. Mixed Signals V2X Dataset is one of the highest quality, large-scale datasets publicly available for V2X perception research. Details on the website https://mixedsignalsdataset.cs.cornell.edu/. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Echoes of Discord: Forecasting Hater Reactions to Counterspeech

Authors: Xiaoying Song, Sharon Lisseth Perez, Xinchen Yu, Eduardo Blanco, Lingzi Hong

Abstract: Hate speech (HS) erodes the inclusiveness of online users and propagates negativity and division. Counterspeech has been recognized as a way to mitigate the harmful consequences. While some research has investigated the impact of user-generated counterspeech on social media platforms, few have examined and modeled haters' reactions toward counterspeech, despite the immediate alteration of haters'… ▽ More Hate speech (HS) erodes the inclusiveness of online users and propagates negativity and division. Counterspeech has been recognized as a way to mitigate the harmful consequences. While some research has investigated the impact of user-generated counterspeech on social media platforms, few have examined and modeled haters' reactions toward counterspeech, despite the immediate alteration of haters' attitudes being an important aspect of counterspeech. This study fills the gap by analyzing the impact of counterspeech from the hater's perspective, focusing on whether the counterspeech leads the hater to reenter the conversation and if the reentry is hateful. We compile the Reddit Echoes of Hate dataset (ReEco), which consists of triple-turn conversations featuring haters' reactions, to assess the impact of counterspeech. To predict haters' behaviors, we employ two strategies: a two-stage reaction predictor and a three-way classifier. The linguistic analysis sheds insights on the language of counterspeech to hate eliciting different haters' reactions. Experimental results demonstrate that the 3-way classification model outperforms the two-stage reaction predictor, which first predicts reentry and then determines the reentry type. We conclude the study with an assessment showing the most common errors identified by the best-performing model. △ Less

Submitted 13 February, 2025; v1 submitted 27 January, 2025; originally announced January 2025.

Comments: NAACL 2025 Findings

The Ophiuchus DIsk Survey Employing ALMA (ODISEA): Complete Size Distributions for the 100 Brightest Disks Across Multiplicity and SED Classes

Authors: Anuroop Dasgupta, Lucas A. Cieza, Camilo I. Gonzalez Ruilova, Trisha Bhowmik, Ms. Prachi Chavan, Grace Batalla-Falcon, Gregory J. Herczeg, Dary A. Ruiz-Rodriguez, Jonathan P. Williams, Anibal Sierra, Simon Casassus, Octavio M. Guilera, Sebastian Perez, Santiago Orcajo, P. H Nogueira, Antonio S. Hales, James M. Miley, Fernando R. Rannou, Alice Zurlo

Abstract: The size of a protoplanetary disk is a fundamental property, yet most remain unresolved, even in nearby star-forming regions (d $\sim$ 140-200 pc). We present the complete continuum size distribution for the $105$ brightest protoplanetary disks (M$_{\text{dust}}$ $\gtrsim$ 2 M$_{\oplus}$) in the Ophiuchus cloud, obtained from ALMA Band 8 (410 GHz) observations at 0.05$^{\prime\prime}$ (7 au) to 0.… ▽ More The size of a protoplanetary disk is a fundamental property, yet most remain unresolved, even in nearby star-forming regions (d $\sim$ 140-200 pc). We present the complete continuum size distribution for the $105$ brightest protoplanetary disks (M$_{\text{dust}}$ $\gtrsim$ 2 M$_{\oplus}$) in the Ophiuchus cloud, obtained from ALMA Band 8 (410 GHz) observations at 0.05$^{\prime\prime}$ (7 au) to 0.15$^{\prime\prime}$ (21 au) resolution. This sample includes 54 Class II and 51 Class I and Flat Spectrum sources, providing a comprehensive distribution across evolutionary stages. We measure the Half Width at Half Maximum (HWHM) and the radius encircling $68\%$ of the flux ($R_{68\%}$) for most non-binary disks, yielding the largest flux-limited sample of resolved disks in any star-forming region. The distribution is log-normal with a median value of $\sim$14 au and a logarithmic standard deviation $σ_{\log} = 0.46$ (factor of 2.9 in linear scale). Disks in close binary systems ($<$ 200 au separation) have smaller radii, with median value of $\sim$5 au, indicating efficient radial drift as predicted by dust evolution models. The size distribution for young embedded objects (SED Class I and Flat Spectrum, age $\lesssim$ 1 Myr) is similar to that of Class II objects (age $\sim$ a few Myr), implying that pressure bumps must be common at early disk stages to prevent mm-sized particle migration at au scales. △ Less

Submitted 27 January, 2025; originally announced January 2025.

Comments: 12 pages, 6 figures

Endangered Alert: A Field-Validated Self-Training Scheme for Detecting and Protecting Threatened Wildlife on Roads and Roadsides

Authors: Kunming Li, Mao Shan, Stephany Berrio Perez, Katie Luo, Stewart Worrall

Abstract: Traffic accidents are a global safety concern, resulting in numerous fatalities each year. A considerable number of these deaths are caused by animal-vehicle collisions (AVCs), which not only endanger human lives but also present serious risks to animal populations. This paper presents an innovative self-training methodology aimed at detecting rare animals, such as the cassowary in Australia, whos… ▽ More Traffic accidents are a global safety concern, resulting in numerous fatalities each year. A considerable number of these deaths are caused by animal-vehicle collisions (AVCs), which not only endanger human lives but also present serious risks to animal populations. This paper presents an innovative self-training methodology aimed at detecting rare animals, such as the cassowary in Australia, whose survival is threatened by road accidents. The proposed method addresses critical real-world challenges, including acquiring and labelling sensor data for rare animal species in resource-limited environments. It achieves this by leveraging cloud and edge computing, and automatic data labelling to improve the detection performance of the field-deployed model iteratively. Our approach introduces Label-Augmentation Non-Maximum Suppression (LA-NMS), which incorporates a vision-language model (VLM) to enable automated data labelling. During a five-month deployment, we confirmed the method's robustness and effectiveness, resulting in improved object detection accuracy and increased prediction confidence. The source code is available: https://github.com/acfr/CassDetect △ Less

Submitted 16 December, 2024; originally announced December 2024.

Comments: 8 pages, 8 figures

Detecting Facial Image Manipulations with Multi-Layer CNN Models

Authors: Alejandro Marco Montejano, Angela Sanchez Perez, Javier Barrachina, David Ortiz-Perez, Manuel Benavent-Lledo, Jose Garcia-Rodriguez

Abstract: The rapid evolution of digital image manipulation techniques poses significant challenges for content verification, with models such as stable diffusion and mid-journey producing highly realistic, yet synthetic, images that can deceive human perception. This research develops and evaluates convolutional neural networks (CNNs) specifically tailored for the detection of these manipulated images. The… ▽ More The rapid evolution of digital image manipulation techniques poses significant challenges for content verification, with models such as stable diffusion and mid-journey producing highly realistic, yet synthetic, images that can deceive human perception. This research develops and evaluates convolutional neural networks (CNNs) specifically tailored for the detection of these manipulated images. The study implements a comparative analysis of three progressively complex CNN architectures, assessing their ability to classify and localize manipulations across various facial image modifications. Regularization and optimization techniques were systematically incorporated to improve feature extraction and performance. The results indicate that the proposed models achieve an accuracy of up to 76\% in distinguishing manipulated images from genuine ones, surpassing traditional approaches. This research not only highlights the potential of CNNs in enhancing the robustness of digital media verification tools, but also provides insights into effective architectural adaptations and training strategies for low-computation environments. Future work will build on these findings by extending the architectures to handle more diverse manipulation techniques and integrating multi-modal data for improved detection capabilities. △ Less

Submitted 9 December, 2024; originally announced December 2024.

Robots in the Wild: Contextually-Adaptive Human-Robot Interactions in Urban Public Environments

Authors: Xinyan Yu, Yiyuan Wang, Tram Thi Minh Tran, Yi Zhao, Julie Stephany Berrio Perez, Marius Hoggenmuller, Justine Humphry, Lian Loke, Lynn Masuda, Callum Parker, Martin Tomitsch, Stewart Worrall

Abstract: The increasing transition of human-robot interaction (HRI) context from controlled settings to dynamic, real-world public environments calls for enhanced adaptability in robotic systems. This can go beyond algorithmic navigation or traditional HRI strategies in structured settings, requiring the ability to navigate complex public urban systems containing multifaceted dynamics and various socio-tec… ▽ More The increasing transition of human-robot interaction (HRI) context from controlled settings to dynamic, real-world public environments calls for enhanced adaptability in robotic systems. This can go beyond algorithmic navigation or traditional HRI strategies in structured settings, requiring the ability to navigate complex public urban systems containing multifaceted dynamics and various socio-technical needs. Therefore, our proposed workshop seeks to extend the boundaries of adaptive HRI research beyond predictable, semi-structured contexts and highlight opportunities for adaptable robot interactions in urban public environments. This half-day workshop aims to explore design opportunities and challenges in creating contextually-adaptive HRI within these spaces and establish a network of interested parties within the OzCHI research community. By fostering ongoing discussions, sharing of insights, and collaborations, we aim to catalyse future research that empowers robots to navigate the inherent uncertainties and complexities of real-world public interactions. △ Less

Submitted 9 December, 2024; v1 submitted 5 December, 2024; originally announced December 2024.

Experimental generation of extreme electron beams for advanced accelerator applications

Authors: Claudio Emma, Nathan Majernik, Kelly Swanson, Robert Ariniello, Spencer Gessner, Rafi Hessami, Mark J Hogan, Alexander Knetsch, Kirk A Larsen, Agostino Marinelli, Brendan O'Shea, Sharon Perez, Ivan Rajkovic, River Robles, Douglas Storey, Gerald Yocky

Abstract: In this Letter we report on the experimental generation of high energy (10 GeV), ultra-short (fs-duration), ultra-high current (0.1 MA), petawatt peak power electron beams in a particle accelerator. These extreme beams enable the exploration of a new frontier of high intensity beam-light and beam-matter interactions broadly relevant across fields ranging from laboratory astrophysics to strong fiel… ▽ More In this Letter we report on the experimental generation of high energy (10 GeV), ultra-short (fs-duration), ultra-high current (0.1 MA), petawatt peak power electron beams in a particle accelerator. These extreme beams enable the exploration of a new frontier of high intensity beam-light and beam-matter interactions broadly relevant across fields ranging from laboratory astrophysics to strong field quantum electrodynamics and ultra-fast quantum chemistry. We demonstrate our ability to generate and control the properties of these electron beams by means of a laser-electron beam shaping technique. This experimental demonstration opens the door to on-the-fly customization of extreme beam current profiles for desired experiments and is poised to benefit a broad swathe of cross-cutting applications of relativistic electron beams. △ Less

Submitted 31 January, 2025; v1 submitted 15 November, 2024; originally announced November 2024.

A Bellman-Ford algorithm for the path-length-weighted distance in graphs

Authors: R. Arnau, J. M. Calabuig, L. M. García Raffi, E. A. Sánchez Pérez, S. Sanjuan

Abstract: Consider a finite directed graph without cycles in which the arrows are weighted. We present an algorithm for the computation of a new distance, called path-length-weighted distance, which has proven useful for graph analysis in the context of fraud detection. The idea is that the new distance explicitly takes into account the size of the paths in the calculations. Thus, although our algorithm is… ▽ More Consider a finite directed graph without cycles in which the arrows are weighted. We present an algorithm for the computation of a new distance, called path-length-weighted distance, which has proven useful for graph analysis in the context of fraud detection. The idea is that the new distance explicitly takes into account the size of the paths in the calculations. Thus, although our algorithm is based on arguments similar to those at work for the Bellman-Ford and Dijkstra methods, it is in fact essentially different. We lay out the appropriate framework for its computation, showing the constraints and requirements for its use, along with some illustrative examples. △ Less

Submitted 28 October, 2024; originally announced November 2024.

Comments: 20 pages, 10 figures

MSC Class: 05C38 (Primary) 90C35 (Secondary)

Eccentric $p-$summing Lipschitz operators and integral inequalities on metric spaces and graphs

Authors: R. Arnau, E. A. Sánchez Pérez, S. Sanjuan

Abstract: The extension of the concept of $p-$summability for linear operators to the context of Lipschitz operators on metric spaces has been extensively studied in recent years. This research primarily uses the linearization of the metric space $M$ afforded by the associated Arens-Eells space, along with the duality between $M$ and the metric dual space $M^\#$ defined by the real-valued Lipschitz function… ▽ More The extension of the concept of $p-$summability for linear operators to the context of Lipschitz operators on metric spaces has been extensively studied in recent years. This research primarily uses the linearization of the metric space $M$ afforded by the associated Arens-Eells space, along with the duality between $M$ and the metric dual space $M^\#$ defined by the real-valued Lipschitz functions on $M.$ However, alternative approaches to measuring distances between sequences of elements of metric spaces (essentially involved in the definition of $p-$summability) exist. One approach involves considering specific subsets of the unit ball of $M^\#$ for computing the distances between sequences, such as the real Lipschitz functions derived from evaluating the difference of the values of the metric from two points to a fixed point. We introduce new notions of summability for Lipschitz operators involving such functions, which are characterized by integral dominations for those operators. To show the applicability of our results, we use in the last part of the paper the theoretical tools obtained in the first part to the analysis of metric graphs. In particular, we show new results on the behavior of numerical indices defined on these graphs satisfying certain conditions of summability and symmetry. △ Less

Submitted 28 October, 2024; originally announced October 2024.

Comments: 23 pages, 3 figures

SENSEI at SNOLAB: Single-Electron Event Rate and Implications for Dark Matter

Authors: Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Miguel Daal, Ansh Desai, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Stephen E. Holland, Jonathan Kehat, Ian Lawson, Steffon Luoma, Aviv Orly, Santiago E. Perez, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza, Miguel Sofo-Haro, Kelly Stifter, Javier Tiffenberg, Sho Uemura , et al. (5 additional authors not shown)

Abstract: We present results from data acquired by the SENSEI experiment at SNOLAB after a major upgrade in May 2023, which includes deploying 16 new sensors and replacing the copper trays that house the CCDs with a new light-tight design. We observe a single-electron event rate of $(1.39 \pm 0.11) \times 10^{-5}$ e$^-$/pix/day, corresponding to $(39.8 \pm 3.1)$ e$^-$/gram/day. This is an order-of-magnitude… ▽ More We present results from data acquired by the SENSEI experiment at SNOLAB after a major upgrade in May 2023, which includes deploying 16 new sensors and replacing the copper trays that house the CCDs with a new light-tight design. We observe a single-electron event rate of $(1.39 \pm 0.11) \times 10^{-5}$ e$^-$/pix/day, corresponding to $(39.8 \pm 3.1)$ e$^-$/gram/day. This is an order-of-magnitude improvement compared to the previous lowest single-electron rate in a silicon detector and the lowest for any photon detector in the near-infrared-ultraviolet range. We use these data to obtain a 90% confidence level upper bound of $1.53 \times 10^{-5}$ e$^-$/pix/day and to set constraints on sub-GeV dark matter candidates that produce single-electron events. We hypothesize that the data taken at SNOLAB in the previous run, with an older tray design for the sensors, contained a larger rate of single-electron events due to light leaks. We test this hypothesis using data from the SENSEI detector located in the MINOS cavern at Fermilab. △ Less

Submitted 24 October, 2024; originally announced October 2024.

Report number: FERMILAB-PUB-24-0767-PPD, YITP-SB-2024-25

A Cranial-Feature-Based Registration Scheme for Robotic Micromanipulation Using a Microscopic Stereo Camera System

Authors: Xiaofeng Lin, Saúl Alexis Heredia Pérez, Kanako Harada

Abstract: Biological specimens exhibit significant variations in size and shape, challenging autonomous robotic manipulation. We focus on the mouse skull window creation task to illustrate these challenges. The study introduces a microscopic stereo camera system (MSCS) enhanced by the linear model for depth perception. Alongside this, a precise registration scheme is developed for the partially exposed mous… ▽ More Biological specimens exhibit significant variations in size and shape, challenging autonomous robotic manipulation. We focus on the mouse skull window creation task to illustrate these challenges. The study introduces a microscopic stereo camera system (MSCS) enhanced by the linear model for depth perception. Alongside this, a precise registration scheme is developed for the partially exposed mouse cranial surface, employing a CNN-based constrained and colorized registration strategy. These methods are integrated with the MSCS for robotic micromanipulation tasks. The MSCS demonstrated a high precision of 0.10 mm $\pm$ 0.02 mm measured in a step height experiment and real-time performance of 30 FPS in 3D reconstruction. The registration scheme proved its precision, with a translational error of 1.13 mm $\pm$ 0.31 mm and a rotational error of 3.38$^{\circ}$ $\pm$ 0.89$^{\circ}$ tested on 105 continuous frames with an average speed of 1.60 FPS. This study presents the application of a MSCS and a novel registration scheme in enhancing the precision and accuracy of robotic micromanipulation in scientific and surgical settings. The innovations presented here offer automation methodology in handling the challenges of microscopic manipulation, paving the way for more accurate, efficient, and less invasive procedures in various fields of microsurgery and scientific research. △ Less

Submitted 24 October, 2024; originally announced October 2024.

Comments: Accepted by Advanced Robotics, Vol. 38, Issue 21

Innovative Deep Learning Techniques for Obstacle Recognition: A Comparative Study of Modern Detection Algorithms

Authors: Santiago Pérez, Camila Gómez, Matías Rodríguez

Abstract: This study explores a comprehensive approach to obstacle detection using advanced YOLO models, specifically YOLOv8, YOLOv7, YOLOv6, and YOLOv5. Leveraging deep learning techniques, the research focuses on the performance comparison of these models in real-time detection scenarios. The findings demonstrate that YOLOv8 achieves the highest accuracy with improved precision-recall metrics. Detailed tr… ▽ More This study explores a comprehensive approach to obstacle detection using advanced YOLO models, specifically YOLOv8, YOLOv7, YOLOv6, and YOLOv5. Leveraging deep learning techniques, the research focuses on the performance comparison of these models in real-time detection scenarios. The findings demonstrate that YOLOv8 achieves the highest accuracy with improved precision-recall metrics. Detailed training processes, algorithmic principles, and a range of experimental results are presented to validate the model's effectiveness. △ Less

Submitted 13 October, 2024; originally announced October 2024.

A semi-Lagrangian method for the direct numerical simulation of crystallization and precipitation at the pore scale

Authors: Sarah Perez, Jean-Matthieu Etancelin, Philippe Poncet

Abstract: This article introduces a new efficient particle method for the numerical simulation of crystallization and precipitation at the pore scale of real rock geometries extracted by X-Ray tomography. It is based on the coupling between superficial velocity models of porous media, Lagrangian description of chemistry using Transition-State-Theory, involving underlying grids. Its ability to successfully c… ▽ More This article introduces a new efficient particle method for the numerical simulation of crystallization and precipitation at the pore scale of real rock geometries extracted by X-Ray tomography. It is based on the coupling between superficial velocity models of porous media, Lagrangian description of chemistry using Transition-State-Theory, involving underlying grids. Its ability to successfully compute dissolution process has been established in the past and is presently generalized to precipitation and crystallization by means of adsorption modeling. Numerical simulations of mineral CO2 trapping are provided, showing evidence of clogging/non-clogging regimes, and one of the main results is the introduction of a new non-dimensional number needed for this characterization. △ Less

Submitted 10 March, 2025; v1 submitted 9 September, 2024; originally announced September 2024.

MSC Class: 65M22 ACM Class: G.1.8; G.1.10; I.6.4; J.2

Journal ref: Frontiers in Earth Science 13:1493305 (2025)

Effects of Proton Irradiation on the Performance of Skipper CCDs

Authors: Brandon Roach, Brenda A. Cervantes Vergara, Santiago Perez, Alex Drlica-Wagner, Juan Estrada, Abhishek Bakshi

Abstract: Skipper CCDs are a mature detector technology that has been suggested for future space telescope instruments requiring sub-electron readout noise in the near-ultraviolet to the near-infrared. While modern skipper CCDs inherit from the radiation-tolerant p-channel detectors developed by LBNL, the effects of high doses of ionizing radiation on skipper CCDs (such as those expected in space) remains l… ▽ More Skipper CCDs are a mature detector technology that has been suggested for future space telescope instruments requiring sub-electron readout noise in the near-ultraviolet to the near-infrared. While modern skipper CCDs inherit from the radiation-tolerant p-channel detectors developed by LBNL, the effects of high doses of ionizing radiation on skipper CCDs (such as those expected in space) remains largely unmeasured. We report preliminary results on the performance of p-channel skipper CCDs following irradiation with 217-MeV protons at the Northwestern Medicine Proton Center. The total nonionizing energy loss (NIEL) experienced by the detectors exceeds 6 years at the Sun-Earth Lagrange Point 2 (L2). We demonstrate that the skipper amplifier continues to function as expected following this irradiation. Owing to the low readout noise of these detectors, controlled irradiation tests can be used to sensitively characterize the charge transfer inefficiency, dark current, and the density and time constants of charge traps as a function of proton fluence. We conclude with a brief outlook toward future tests of these detectors at other proton and gamma-ray facilities. △ Less

Submitted 17 July, 2024; originally announced July 2024.

Comments: SPIE Astronomical Telescopes + Instrumentation 2024

Report number: FERMILAB-CONF-24-0297-LDRD

Studying single-electron traps in newly fabricated Skipper-CCDs for the Oscura experiment using the pocket-pumping technique

Authors: S. E. Perez, B. A. Cervantes-Vergara, J. Estrada, S. Holland, D. Rodrigues, J. Tiffenberg

Abstract: Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of… ▽ More Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of these newly fabricated skipper-CCDs. These defects/contaminants produce deferred charge from trap emission in the images next to particle tracks, which can be spatially resolved due to the sub-electron resolution achieved with these sensors. Using the trap-pumping technique, we measured the energy and cross section associated to these traps in three Oscura prototype sensors from different fabrication batches which underwent different gettering methods during fabrication. Results suggest that the type of defects/contaminants is more closely linked to the fabrication batch rather than to the gettering method used. The exposure-dependent single-electron rate (SER) of one of these sensors was measured $\sim$100~m underground, yielding $(1.8\pm 0.3)\times10^{-3}~e^-$/pix/day at 131K. The impact of the identified traps on the measured exposure-dependent SER is evaluated via a Monte Carlo simulation. Results suggest that the exposure-dependent SER of Oscura prototype sensors would be lower in lower background environments as expected. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Lattice Lipschitz superposition operators on Banach function spaces

Authors: Roger Arnau, Jose M. Calabuig, Ezgi Erdoğan, Enrique A. Sánchez Pérez

Abstract: We analyse and characterise the notion of lattice Lipschitz operator (a class of superposition operators, diagonal Lipschitz maps) when defined between Banach function spaces. After showing some general results, we restrict our attention to the case of those Lipschitz operators which are representable by pointwise composition with a strongly measurable function. Mimicking the classical definition… ▽ More We analyse and characterise the notion of lattice Lipschitz operator (a class of superposition operators, diagonal Lipschitz maps) when defined between Banach function spaces. After showing some general results, we restrict our attention to the case of those Lipschitz operators which are representable by pointwise composition with a strongly measurable function. Mimicking the classical definition and characterizations of (linear) multiplication operators between Banach function spaces, we show that under certain conditions the requirement for a diagonal Lipschitz operator to be well-defined between two such spaces $X(μ)$ and $Y(μ)$ is that it can be represented by a strongly measurable function which belongs to the Bochner space $\mathcal M(X,Y) \big(μ, Lip_0(\mathbb R) \big). $ Here, $\mathcal M(X,Y) $ is the space of multiplication operators between $X(μ)$ and $Y(μ),$ and $Lip_0(\mathbb R)$ is the space of real-valued Lipschitz maps with real variable that are equal to $0$ in $0. $ This opens the door to a better understanding of these maps, as well as finding the relation of these operators to some normed tensor products and other classes of maps. △ Less

Submitted 6 June, 2024; originally announced June 2024.

MSC Class: 47J10; 46E30; 26A16

Search for reactor-produced millicharged particles with Skipper-CCDs at the CONNIE and Atucha-II experiments

Authors: Alexis A. Aguilar-Arevalo, Nicolas Avalos, Pablo Bellino, Xavier Bertou, Carla Bonifazi, Ana Botti, Mariano Cababié, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Claudio Chavez, Fernando Chierchie, David Delgado, Eliana Depaoli, Juan Carlos D'Olivo, João dos Anjos, Juan Estrada, Guillermo Fernandez Moroni, Aldo R. Fernandes Neto, Richard Ford, Ben Kilminster, Kevin Kuk, Andrew Lathrop, Patrick Lemos, Herman P. Lima Jr., Martin Makler , et al. (15 additional authors not shown)

Abstract: Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CON… ▽ More Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CONNIE and Atucha-II reactor neutrino experiments utilize Skipper-CCD sensors, which enable the detection of interactions in the eV range. We present world-leading limits on the charge of millicharged particles within a mass range spanning six orders of magnitude, derived through a comprehensive analysis and the combination of data from both experiments. △ Less

Submitted 5 November, 2024; v1 submitted 25 May, 2024; originally announced May 2024.

Comments: 10 pages, 3 figures

Primitive Quantum Gates for an SU(3) Discrete Subgroup: $Σ(36\times3)$

Authors: Erik J. Gustafson, Yao Ji, Henry Lamm, Edison M. Murairi, Sebastian Osorio Perez, Shuchen Zhu

Abstract: We construct the primitive gate set for the digital quantum simulation of the 108-element $Σ(36\times3)$ group. This is the first time a nonabelian crystal-like subgroup of $SU(3)$ has been constructed for quantum simulation. The gauge link registers and necessary primitives -- the inversion gate, the group multiplication gate, the trace gate, and the $Σ(36\times3)$ Fourier transform -- are presen… ▽ More We construct the primitive gate set for the digital quantum simulation of the 108-element $Σ(36\times3)$ group. This is the first time a nonabelian crystal-like subgroup of $SU(3)$ has been constructed for quantum simulation. The gauge link registers and necessary primitives -- the inversion gate, the group multiplication gate, the trace gate, and the $Σ(36\times3)$ Fourier transform -- are presented for both an eight-qubit encoding and a heterogeneous three-qutrit plus two-qubit register. For the latter, a specialized compiler was developed for decomposing arbitrary unitaries onto this architecture. △ Less

Submitted 6 September, 2024; v1 submitted 30 April, 2024; originally announced May 2024.

Comments: 15 pages, 11 Figures, 6 Tables

Report number: FERMILAB-PUB-24-0132-SQMS-T; TUM-HEP-1506/24

Journal ref: Phys. Rev. D 110, 034515 (2024)

Astrometric and photometric characterization of $η$ Tel B combining two decades of observations

Authors: P. H. Nogueira, C. Lazzoni, A. Zurlo, T. Bhowmik, C. Donoso-Oliva, S. Desidera, J. Milli, S. Pérez, P. Delorme, A. Fernadez, M. Langlois, S. Petrus, G. Cabrera-Vives, G. Chauvin

Abstract: $η$ Tel is an 18 Myr system with a 2.09 M$_{\odot}$ A-type star and an M7-M8 brown dwarf companion, $η$ Tel B, separated by 4.2'' (208 au). High-contrast imaging campaigns over 20 years have enabled orbital and photometric characterization. $η$ Tel B, bright and on a wide orbit, is ideal for detailed examination. We analyzed three new SPHERE/IRDIS coronagraphic observations to explore $η… ▽ More $η$ Tel is an 18 Myr system with a 2.09 M$_{\odot}$ A-type star and an M7-M8 brown dwarf companion, $η$ Tel B, separated by 4.2'' (208 au). High-contrast imaging campaigns over 20 years have enabled orbital and photometric characterization. $η$ Tel B, bright and on a wide orbit, is ideal for detailed examination. We analyzed three new SPHERE/IRDIS coronagraphic observations to explore $η$ Tel B's orbital parameters, contrast, and surroundings, aiming to detect a circumplanetary disk or close companion. Reduced IRDIS data achieved a contrast of 1.0$\times 10^{-5}$, enabling astrometric measurements with uncertainties of 4 mas in separation and 0.2 degrees in position angle, the smallest so far. With a contrast of 6.8 magnitudes in the H band, $η$ Tel B's separation and position angle were measured as 4.218'' and 167.3 degrees, respectively. Orbital analysis using Orvara code, considering Gaia-Hipparcos acceleration, revealed a low eccentric orbit (e $\sim$ 0.34), inclination of 81.9 degrees, and semi-major axis of 218 au. $η$ Tel B's mass was determined to be 48 \MJup, consistent with previous calculations. No significant residual indicating a satellite or disk around $η$ Tel B was detected. Detection limits ruled out massive objects around $η$ Tel B with masses down to 1.6 \MJup at a separation of 33 au. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 13 pages, 10 figures, accepted for publication in A&A (01/05/2024)

Journal ref: A&A 687, A301 (2024)

Discovery of an accretion streamer and a slow wide-angle outflow around FU Orionis

Authors: A. S. Hales, A. Gupta, D. Ruiz-Rodriguez, J. P. Williams, S. Perez, L. Cieza, C. Gonzalez-Ruilova, J. E. Pineda, A. Santamaria-Miranda, J. Tobin, P. Weber, Z. Zhu, A. Zurlo

Abstract: We present ALMA 12-m, 7-m & Total Power (TP) Array observations of the FU Orionis outbursting system, covering spatial scales ranging from 160 to 25,000 au. The high-resolution interferometric data reveals an elongated $^{12}$CO(2-1) feature previously observed at lower resolution in $^{12}$CO(3-2). Kinematic modeling indicates that this feature can be interpreted as an accretion streamer feeding… ▽ More We present ALMA 12-m, 7-m & Total Power (TP) Array observations of the FU Orionis outbursting system, covering spatial scales ranging from 160 to 25,000 au. The high-resolution interferometric data reveals an elongated $^{12}$CO(2-1) feature previously observed at lower resolution in $^{12}$CO(3-2). Kinematic modeling indicates that this feature can be interpreted as an accretion streamer feeding the binary system. The mass infall rate provided by the streamer is significantly lower than the typical stellar accretion rates (even in quiescent states), suggesting that this streamer alone is not massive enough to sustain the enhanced accretion rates characteristic of the outbursting class prototype. The observed streamer may not be directly linked to the current outburst but rather a remnant of a previous, more massive streamer that may have contributed enough to the disk mass to render it unstable and trigger FU Ori's outburst. The new data detects, for the first time, a vast, slow-moving carbon monoxide molecular outflow emerging from this object. To accurately assess the outflow properties (mass, momentum, kinetic energy), we employed $^{13}$CO(2-1) data to correct for optical depth effects. The analysis indicates that the outflow corresponds to swept-up material not associated with the current outburst, similar to slow-molecular outflows observed around other FUor and Class I protostellar objects. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Journal ref: 2024, ApJ, 966, 96H

Advanced simulation-based predictive modelling for solar irradiance sensor farms

Authors: José L. Risco-Martín, Ignacio-Iker Prado-Rujas, Javier Campoy, María S. Pérez, Katzalin Olcoz

Abstract: As solar power continues to grow and replace traditional energy sources, the need for reliable forecasting models becomes increasingly important to ensure the stability and efficiency of the grid. However, the management of these models still needs to be improved, and new tools and technologies are required to handle the deployment and control of solar facilities. This work introduces a novel fram… ▽ More As solar power continues to grow and replace traditional energy sources, the need for reliable forecasting models becomes increasingly important to ensure the stability and efficiency of the grid. However, the management of these models still needs to be improved, and new tools and technologies are required to handle the deployment and control of solar facilities. This work introduces a novel framework named Cloud-based Analysis and Integration for Data Efficiency (CAIDE), designed for real-time monitoring, management, and forecasting of solar irradiance sensor farms. CAIDE is designed to manage multiple sensor farms simultaneously while improving predictive models in real-time using well-grounded Modeling and Simulation (M&S) methodologies. The framework leverages Model Based Systems Engineering (MBSE) and an Internet of Things (IoT) infrastructure to support the deployment and analysis of solar plants in dynamic environments. The system can adapt and re-train the model when given incorrect results, ensuring that forecasts remain accurate and up-to-date. Furthermore, CAIDE can be executed in sequential, parallel, and distributed architectures, assuring scalability. The effectiveness of CAIDE is demonstrated in a complex scenario composed of several solar irradiance sensor farms connected to a centralized management system. Our results show that CAIDE is scalable and effective in managing and forecasting solar power production while improving the accuracy of predictive models in real time. The framework has important implications for the deployment of solar plants and the future of renewable energy sources. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Journal ref: Journal of Simulation, pp. 1-18, 2024

Polarimetric differential imaging with VLT/NACO. A comprehensive PDI pipeline for NACO data (PIPPIN)

Authors: S. de Regt, C. Ginski, M. A. Kenworthy, C. Caceres, A. Garufi, T. M. Gledhill, A. S. Hales, N. Huelamo, A. Kospal, M. A. Millar-Blanchaer, S. Perez, M. R. Schreiber

Abstract: The observed diversity of exoplanets can possibly be traced back to the planet formation processes. Planet-disk interactions induce sub-structures in the circumstellar disk that can be revealed via scattered light observations. However, a high-contrast imaging technique such as polarimetric differential imaging (PDI) must first be applied to suppress the stellar diffraction halo. In this work we p… ▽ More The observed diversity of exoplanets can possibly be traced back to the planet formation processes. Planet-disk interactions induce sub-structures in the circumstellar disk that can be revealed via scattered light observations. However, a high-contrast imaging technique such as polarimetric differential imaging (PDI) must first be applied to suppress the stellar diffraction halo. In this work we present the PDI PiPelIne for NACO data (PIPPIN), which reduces the archival polarimetric observations made with the NACO instrument at the Very Large Telescope. Prior to this work, such a comprehensive pipeline to reduce polarimetric NACO data did not exist. We identify a total of 243 datasets of 57 potentially young stellar objects observed before NACO's decommissioning. The PIPPIN pipeline applies various levels of instrumental polarisation correction and is capable of reducing multiple observing setups, including half-wave plate or de-rotator usage and wire-grid observations. A novel template-matching method is applied to assess the detection significance of polarised signals in the reduced data. In 22 of the 57 observed targets, we detect polarised light resulting from a scattering of circumstellar dust. The detections exhibit a collection of known sub-structures, including rings, gaps, spirals, shadows, and in- or outflows of material. Since NACO was equipped with a near-infrared wavefront sensor, it made unique polarimetric observations of a number of embedded protostars. This is the first time detections of the Class I objects Elia 2-21 and YLW 16A have been published. Alongside the outlined PIPPIN pipeline, we publish an archive of the reduced data products, thereby improving the accessibility of these data for future studies. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: Accepted for publication in A&A. For more information on PIPPIN, see: https://pippin-naco.readthedocs.io/en/latest . The reduced images are available on Zenodo: https://zenodo.org/doi/10.5281/zenodo.8348803

The environment around young eruptive stars. SPHERE/IRDIS polarimetric imaging of 7 protostars

Authors: A. Zurlo, P. Weber, S. Pérez, L. Cieza, C. Ginski, R. G. van Holstein, D. Principe, A. Garufi, A. Hales, J. Kastner, E. Rigliaco, G. Ruane, M. Benisty, C. Manara

Abstract: Eruptive stars are a class of young stellar objects that show an abrupt increase in their luminosity. These burst-like episodes are thought to dominate the stellar accretion process during the class 0/class I stage. We present an overview of a survey of seven episodically accreting protostars aimed at studying their potentially complex circumstellar surroundings. The observations were performed wi… ▽ More Eruptive stars are a class of young stellar objects that show an abrupt increase in their luminosity. These burst-like episodes are thought to dominate the stellar accretion process during the class 0/class I stage. We present an overview of a survey of seven episodically accreting protostars aimed at studying their potentially complex circumstellar surroundings. The observations were performed with the instrument SPHERE, mounted at the VLT. We observed the eruptive stars in $H$-band with the near-infrared imager IRDIS and used the polarimeter to extract the polarized light scattered from the stars' surroundings. We produced polarized light images for three FUor objects, Z CMa, V960 Mon, and FU Ori, and four EXor objects, XZ Tau, UZ Tau, NY Ori, and EX Lup. We calculated the intrinsic polarization fraction for all the observed stars. In all systems we registered scattered light from around the primary star. FU Ori and V960 Mon are surrounded by complex structures including spiral-like features. In Z CMa, we detected a point source 0.7 arcsec to the northeast of the primary. Based on the astrometric measurements from archival Keck/NIRC2 data, we find this source to be a third member of the system. Further, Z CMa displays an outflow extending thousands of au. Unlike the other EXor objects in our sample, XZ Tau shows bright, extended scattered light structures, also associated with an outflow on a scale of hundreds of au. The other EXors show relatively faint disk-like structures in the immediate vicinity of the coronagraph. Asymmetric arms were only found around FUor objects, while faint disks seem to predominantly occur around EXors. Importantly, for Z CMa the detection of the faint extended structure questions previous interpretations of the system's dynamic state. The streamer which was associated with a fly-by object turned out to be part of a huge outflow extending 6000 au. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: Accepted for publication in A&A. 14 pages, 7 figures, 2 tables

The SPHERE view of the Taurus star-forming region

Authors: A. Garufi, C. Ginski, R. G. van Holstein, M. Benisty, C. F. Manara, S. Pérez, P. Pinilla, Á. Ribas, P. Weber, J. Williams, L. Cieza, C. Dominik, S. Facchini, J. Huang, A. Zurlo, J. Bae, J. Hagelberg, Th. Henning, M. R. Hogerheijde, M. Janson, F. Ménard, S. Messina, M. R. Meyer, C. Pinte, S. P. Quanz , et al. (9 additional authors not shown)

Abstract: The sample of planet-forming disks observed by high-contrast imaging campaigns over the last decade is mature enough to enable the demographical analysis of individual star-forming regions. We present the full census of Taurus sources with VLT/SPHERE polarimetric images available. The whole sample sums up to 43 targets (of which 31 have not been previously published) corresponding to one-fifth of… ▽ More The sample of planet-forming disks observed by high-contrast imaging campaigns over the last decade is mature enough to enable the demographical analysis of individual star-forming regions. We present the full census of Taurus sources with VLT/SPHERE polarimetric images available. The whole sample sums up to 43 targets (of which 31 have not been previously published) corresponding to one-fifth of the Class II population in Taurus and about half of such objects that are observable. A large fraction of the sample is apparently made up of isolated faint disks (equally divided between small and large self-shadowed disks). Ambient signal is visible in about one-third of the sample. This probes the interaction with the environment and with companions or the outflow activity of the system. The central portion of the Taurus region almost exclusively hosts faint disks, while the periphery also hosts bright disks interacting with their surroundings. The few bright disks are found around apparently older stars. The overall picture is that the Taurus region is in an early evolutionary stage of planet formation. Yet, some objects are discussed individually, as in an intermediate or exceptional stage of the disk evolution. This census provides a first benchmark for the comparison of the disk populations in different star forming regions. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Comments: Accepted by A&A

Moduli of Continuity in Metric Models and Extension of Liveability Indices

Authors: R. Arnau, J. M. Calabuig, Álvaro González, Enrique A. Sánchez Pérez

Abstract: Index spaces serve as valuable metric models for studying properties relevant to various applications, such as social science or economics. These properties are represented by real Lipschitz functions that describe the degree of association with each element within the underlying metric space. After determining the index value within a given sample subset, the classic McShane and Whitney formulas… ▽ More Index spaces serve as valuable metric models for studying properties relevant to various applications, such as social science or economics. These properties are represented by real Lipschitz functions that describe the degree of association with each element within the underlying metric space. After determining the index value within a given sample subset, the classic McShane and Whitney formulas allow a Lipschitz regression procedure to be performed to extend the index values over the entire metric space. To improve the adaptability of the metric model to specific scenarios, this paper introduces the concept of a composition metric, which involves composing a metric with an increasing, positive and subadditive function $φ$. The results presented here extend well-established results for Lipschitz indices on metric spaces to composition metrics. In addition, we establish the corresponding approximation properties that facilitate the use of this functional structure. To illustrate the power and simplicity of this mathematical framework, we provide a concrete application involving the modelling of livability indices in North American cities. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Aperiodic two-layer energy management system for community microgrids based on blockchain strategy

Authors: Miguel Gayo Abeleira, Carlos Santos Pérez, Francisco Javier Rodríguez Sánchez, Pedro Martín Sánchez, Enrique Santiso Gómez, José Antonio Jiménez Calvo

Abstract: This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is res… ▽ More This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is responsible for creating local energy markets with the aim of maximising the economic benefits for community microgrid members. The second layer is responsible for the network reconfiguration, which is based on the energy balance within each cluster. This layer complies with the IEC 61850 communication standard, in order to control commercial sectionalizing and tie switches. This allows the community microgrid network to be reconfigured to minimise energy exchanges with the main grid. To implement this two-layer energy management strategy, an aperiodic market approach based on Blockchain technology, and the additional functionality offered by Smart Contracts is adopted. This embraces the concept of energy communities since it decentralizes the control and eliminates intermediaries. The use of aperiodic control techniques helps to overcome the challenges of using Blockchain technology in terms of storage, computational requirements and member privacy. The scalability and modularity of the Smart Contract-based system allow each cluster of members to be designed by tailoring the system to their specific needs. The implementation of this strategy is based on low-cost off-the-shelf devices, such as Raspberry Pi 4 Model B boards, which operate as Blockchain nodes of community microgrid members. Finally, the strategy has been validated by emulating two use cases based on the IEEE 123-node system network model highlighting the benefits of the proposal. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Journal ref: Applied Energy, Volume 324, 2022, 119847, ISSN 0306-2619

Magnetized Strange Stars and Signals of Gravitational Waves

Authors: S. López Pérez, D. Manreza Paret, A. Pérez Martínez

Abstract: We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the… ▽ More We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the Love number equation. These results are compared with the data inferred from the GW170817 event which is also used to calculate the mass and tidal deformability of the companion star in the binary system. Our model supports binary systems formed by magnetized strange stars describing reasonable signals of gravitational waves contrasted with other models of binary systems composed of magnetized hadronic stars and non-magnetized quark stars. △ Less

Submitted 31 January, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

Deployment and performance of a Low-Energy-Threshold Skipper-CCD inside a nuclear reactor

Authors: E. Depaoli, D. Rodrigues, I. Sidelnik, P. Bellino, A. Botti, D. Delgado, M. Cababie, F. Chierchie, J. Estrada, G. Fernandez Moroni, S. Perez, J. Tiffenberg

Abstract: Charge Coupled Devices (CCD) are used for reactor neutrino experiments and already shown their potential in constraining new physics models. The prospect of a Skipper-CCD experiment looking for standard and beyond standard model physics (BSM) in a nuclear reactor has been recently evaluated for different benchmark scenarios. Here we report the installation of the first 2 g Skipper-CCD inside the c… ▽ More Charge Coupled Devices (CCD) are used for reactor neutrino experiments and already shown their potential in constraining new physics models. The prospect of a Skipper-CCD experiment looking for standard and beyond standard model physics (BSM) in a nuclear reactor has been recently evaluated for different benchmark scenarios. Here we report the installation of the first 2 g Skipper-CCD inside the containment building of a 2 GW$_{th}$ nuclear power plant, positioned 12 meters from the center of the reactor core. We discuss the challenges involved in the commissioning of the detector and present data acquired during reactor ON and reactor OFF periods, with the detector operating with a sub-electron readout noise of 0.17 e-. The ongoing efforts to improve sensitivities to CEvNS and BSM interaction are also discussed. △ Less

Submitted 7 March, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures, 1 table

SENSEI: First Direct-Detection Results on sub-GeV Dark Matter from SENSEI at SNOLAB

Authors: SENSEI Collaboration, Prakruth Adari, Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Michael Crisler, Miguel Daal, Ansh Desai, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Stephen E. Holland, Jonathan Kehat, Yaron Korn, Ian Lawson, Steffon Luoma, Aviv Orly, Santiago E. Perez, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza , et al. (12 additional authors not shown)

Abstract: We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. We employ a bias-mitigation technique of hiding approximately 46% of our total data and aggressively mask images to remove backgrounds. Given a total exposure after masking of 100.72 gram-days from well-performing sensors, we observe 55 two-electron events, 4 three-electron eve… ▽ More We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. We employ a bias-mitigation technique of hiding approximately 46% of our total data and aggressively mask images to remove backgrounds. Given a total exposure after masking of 100.72 gram-days from well-performing sensors, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 electrons. The two-electron events are consistent with pileup from one-electron events. Among the 4 three-electron events, 2 appear in pixels that are likely impacted by detector defects, although not strongly enough to trigger our "hot-pixel" mask. We use these data to set world-leading constraints on sub-GeV dark matter interacting with electrons and nuclei. △ Less

Submitted 23 January, 2025; v1 submitted 20 December, 2023; originally announced December 2023.

Comments: 6 pages, 2 figures, + Supplemental Materials (5 pages, 6 figures) + References. v2: Minor clarifications, matches version published in PRL

Report number: YITP-SB-2023-30, FERMILAB-PUB-23-0824-CSAID-PPD

Viscous heating as the dominant heat source inside the water snowline of V883 Ori

Authors: Felipe Alarcón, Simón Casassus, Wladimir lyra, Sebastián Pérez, Lucas Cieza

Abstract: FU Orionis-type objects(FUors) are embedded protostars that undergo episodes of high accretion, potentially indicating a widespread but poorly understood phase in the formation of low-mass stars. Gaining a better understanding of the influence exerted by these outbursts on the evolution of the surrounding protoplanetary disc may hold significant implications for the process of planet formation and… ▽ More FU Orionis-type objects(FUors) are embedded protostars that undergo episodes of high accretion, potentially indicating a widespread but poorly understood phase in the formation of low-mass stars. Gaining a better understanding of the influence exerted by these outbursts on the evolution of the surrounding protoplanetary disc may hold significant implications for the process of planet formation and the evolution of disc chemistry. The heating due to outbursts of high accretion in FUors pushes the snowlines of key volatiles farther out in the disc, so they become easier to observe and study. Among the known FUors, V883 Ori is of particular interest. V883 Ori was the first FUor to show indirect evidence of a resolvable snowline beyond 40 au. By introducing a radial-dependent model of this source including viscous heating, we show that active heating is needed to reproduce the steep thermal profile of dust in the inner disc of V883 Ori. Our disc modeling combines the effect of stellar irradiation and the influence on the disc shape caused by the outburst of accretion. The accuracy of our model is tested by comparing synthetic ALMA images with continuum observations of V883 Ori, showing that the model successfully reproduces the 1.3 mm emission of V883 Ori at high spatial resolution. Our final predictions underline the importance of viscous heating as a predominant heat source for this type of object, changing the physical conditions (shape and temperature) of the disc, and influencing its evolution. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: Accepted for publication in MNRAS

The distribution amplitude of the $η_c$ meson

Authors: Miguel Teseo San José Pérez, Benoît Blossier, Mariane Mangin-Brinet, José Manuel Morgado Chávez

Abstract: We report on the first lattice determination of the pseudoscalar meson $η_c$ light-cone distribution amplitude, using a set of three CLS $N_f=2$ ensembles at a pion mass $m_π \sim 270~\text{MeV}$ and lattice spacings $a \sim 0.076~\text{fm}$, $0.066~\text{fm}$ and $0.049~\text{fm}$. Employing Short Distance Factorization, we extract the pseudo-DA on the lattice for Ioffe times $ν\leq 4.5$, and the… ▽ More We report on the first lattice determination of the pseudoscalar meson $η_c$ light-cone distribution amplitude, using a set of three CLS $N_f=2$ ensembles at a pion mass $m_π \sim 270~\text{MeV}$ and lattice spacings $a \sim 0.076~\text{fm}$, $0.066~\text{fm}$ and $0.049~\text{fm}$. Employing Short Distance Factorization, we extract the pseudo-DA on the lattice for Ioffe times $ν\leq 4.5$, and the various lattice spacings allow us to take the continuum limit. We employ a basis of Jacobi polynomials to parametrize the distribution amplitude, which allows to express the matching to the pseudo distribution in closed form, and we observe a strong effect which we attribute to the heavy charm-quark mass. △ Less

Submitted 20 November, 2023; v1 submitted 16 November, 2023; originally announced November 2023.

Comments: Contribution to the 40th International Symposium on Lattice Field Theory (Lattice 2023), July 31st - August 4th, 2023. Fermi National Accelerator Laboratory

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

Authors: A. A. Aguilar-Arevalo, J. L. Barrow, C. Bhat, J. Bogenschuetz, C. Bonifazi, A. Bross, B. Cervantes, J. D'Olivo, A. De Roeck, B. Dutta, M. Eads, J. Eldred, J. Estrada, A. Fava, C. Fernandes Vilela, G. Fernandez Moroni, B. Flaugher, S. Gardiner, G. Gurung, P. Gutierrez, W. Y. Jang, K. J. Kelly, D. Kim, T. Kobilarcik, Z. Liu , et al. (23 additional authors not shown)

Abstract: The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on Ma… ▽ More The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on May 10 through 13, 2023, to exploit this capability for new physics opportunities in the kinematic regime that are unavailable to other facilities, in particular a potential beam dump facility implemented at the end of the LINAC. Various new physics opportunities have been discussed in a wide range of kinematic regime, from eV scale to keV and MeV. We also emphasize that the timely establishment of the beam dump facility at Fermilab is essential to exploit these new physics opportunities. △ Less

Submitted 16 November, 2023; originally announced November 2023.

Report number: FERMILAB-FN-1242-AD-ND-PPD

Atomistic origins of asymmetric charge-discharge kinetics in off-stoichiometric LiNiO$_2$

Authors: Penghao Xiao, Ning Zhang, Harold Smith Perez, Minjoon Park

Abstract: LiNiO$_2$ shows poor Li transport kinetics at the ends of charge and discharge in the first cycle, which significantly reduces its available capacity in practice. The atomistic origins of these kinetic limits have not been fully understood. Here, we examine Li transport in LiNiO$_2$ by first-principles-based kinetic Monte Carlo simulations where both long time scale and large length scale are achi… ▽ More LiNiO$_2$ shows poor Li transport kinetics at the ends of charge and discharge in the first cycle, which significantly reduces its available capacity in practice. The atomistic origins of these kinetic limits have not been fully understood. Here, we examine Li transport in LiNiO$_2$ by first-principles-based kinetic Monte Carlo simulations where both long time scale and large length scale are achieved, enabling direct comparison with experiments. Our results reveal the rate-limiting steps at both ends of the voltage scan and distinguish the differences between charge and discharge at the same Li content. The asymmetric effects of excess Ni in the Li layer (Ni$_\textrm{Li}$) are also captured in our unified modelling framework. In the low voltage region, the first cycle capacity loss due to high overpotential at the end of discharge is reproduced without empirical input. While the Li concentration gradient is found responsible for the low overpotential during charge at this state of charge. Ni$_\textrm{Li}$ increases the overpotential of discharge but not charge because it only impedes Li diffusion in a particular range of Li concentration and does not change the equilibrium voltage profile. The trends from varying the amount of Ni$_\textrm{Li}$ and temperature agree with experiments. In the high voltage region, charge becomes the slower process. The bottleneck becomes moving a Li from the Li-rich phase (H2) into the Li-poor phase (H3), while the Li hopping barriers in both phases are relatively low. The roles of preexisting nucleation sites and Ni$_\textrm{Li}$ are discussed. These results provide new atomistic insights of the kinetic hindrances, paving the road to unleash the full potential of high-Ni layered oxide cathodes. △ Less

Submitted 10 November, 2023; originally announced November 2023.

Unleashing quantum algorithms with Qinterpreter: bridging the gap between theory and practice across leading quantum computing platforms

Authors: Wilmer Contreras Sepúlveda, Ángel David Torres-Palencia, José Javier Sánchez Mondragón, Braulio Misael Villegas-Martínez, J. Jesús Escobedo-Alatorre, Sandra Gesing, Néstor Lozano-Crisóstomo, Julio César García-Melgarejo, Juan Carlos Sánchez Pérez, Eddie Nelson Palacios- Pérez, Omar PalilleroSandoval

Abstract: Quantum computing is a rapidly emerging and promising field that has the potential to revolutionize numerous research domains, including drug design, network technologies and sustainable energy. Due to the inherent complexity and divergence from classical computing, several major quantum computing libraries have been developed to implement quantum algorithms, namely IBM Qiskit, Amazon Braket, Cirq… ▽ More Quantum computing is a rapidly emerging and promising field that has the potential to revolutionize numerous research domains, including drug design, network technologies and sustainable energy. Due to the inherent complexity and divergence from classical computing, several major quantum computing libraries have been developed to implement quantum algorithms, namely IBM Qiskit, Amazon Braket, Cirq, PyQuil, and PennyLane. These libraries allow for quantum simulations on classical computers and facilitate program execution on corresponding quantum hardware, e.g., Qiskit programs on IBM quantum computers. While all platforms have some differences, the main concepts are the same. QInterpreter is a tool embedded in the Quantum Science Gateway QubitHub using Jupyter Notebooks that translates seamlessly programs from one library to the other and visualizes the results. It combines the five well-known quantum libraries: into a unified framework. Designed as an educational tool for beginners, Qinterpreter enables the development and execution of quantum circuits across various platforms in a straightforward way. The work highlights the versatility and accessibility of Qinterpreter in quantum programming and underscores our ultimate goal of pervading Quantum Computing through younger, less specialized, and diverse cultural and national communities. △ Less

Submitted 16 October, 2024; v1 submitted 10 October, 2023; originally announced October 2023.

Comments: Final article submitted to Peer J computer science Journal

Training and inference of large language models using 8-bit floating point

Authors: Sergio P. Perez, Yan Zhang, James Briggs, Charlie Blake, Josh Levy-Kramer, Paul Balanca, Carlo Luschi, Stephen Barlow, Andrew William Fitzgibbon

Abstract: FP8 formats are gaining popularity to boost the computational efficiency for training and inference of large deep learning models. Their main challenge is that a careful choice of scaling is needed to prevent degradation due to the reduced dynamic range compared to higher-precision formats. Although there exists ample literature about selecting such scalings for INT formats, this critical aspect h… ▽ More FP8 formats are gaining popularity to boost the computational efficiency for training and inference of large deep learning models. Their main challenge is that a careful choice of scaling is needed to prevent degradation due to the reduced dynamic range compared to higher-precision formats. Although there exists ample literature about selecting such scalings for INT formats, this critical aspect has yet to be addressed for FP8. This paper presents a methodology to select the scalings for FP8 linear layers, based on dynamically updating per-tensor scales for the weights, gradients and activations. We apply this methodology to train and validate large language models of the type of GPT and Llama 2 using FP8, for model sizes ranging from 111M to 70B. To facilitate the understanding of the FP8 dynamics, our results are accompanied by plots of the per-tensor scale distribution for weights, activations and gradients during both training and inference. △ Less

Submitted 29 September, 2023; originally announced September 2023.

ACM Class: I.2.7; B.2.4

Radio-continuum decrements associated to shadowing from the central warp in transition disc DoAr44

Authors: Carla Arce-Tord, Simon Casassus, William R. F. Dent, Sebastián Pérez, Miguel Cárcamo, Philipp Weber, Natalia Engler, Lucas A. Cieza, Antonio Hales, Alice Zurlo, Sebastian Marino

Abstract: Warps have often been used to explain disc properties, but well characterised examples are important due to their role in disc evolution. Scattered light images of discs with central gaps have revealed sharp warps, such that the outer rings are shadowed by tilted inner discs. The near-IR intensity drops along the ring around TTauri star DoAr44 have been interpreted in terms of a central warp. We r… ▽ More Warps have often been used to explain disc properties, but well characterised examples are important due to their role in disc evolution. Scattered light images of discs with central gaps have revealed sharp warps, such that the outer rings are shadowed by tilted inner discs. The near-IR intensity drops along the ring around TTauri star DoAr44 have been interpreted in terms of a central warp. We report new ALMA observations of DoAr44 in the continuum at 230 GHz and 350 GHz (at ~10 au), along with a new epoch of SPHERE/IRDIS differential polarised imaging taken during excellent weather conditions. The ALMA observations resolve the ring and confirm the decrements proposed from deconvolution of coarse 336 GHz data. The scattered light image constrains the dips, which correspond to a misaligned inner disc with a relative inclination $ξ$ = 21.4 $^{+6.7}_{-8.3}$ deg. The SPHERE intensity profile shows a morphological change compared to a previous epoch that may be interpreted as a variable orientation of the inner disc, from $ξ$ ~30 deg to $ξ$ ~20 deg. The intensity dips probably correspond to temperature decrements, as their mm-spectral index, $α^{230 GHz}_{350 GHz}$ ~2.0 $\pm$ 0.1, is indicative of optically thick emission. The azimuth of the two temperature decrements are leading clockwise relative to the IR-dips, by $η$ = 14.95 deg and $η$ = 7.92 deg. For a retrograde disc, such shifts are expected from a thermal lag and imply gas surface densities of $Σ_g$ = 117 $\pm$ 10 g/cm$^2$ and $Σ_g$ = 48 $\pm$ 10 g/cm$^2$. A lopsided disc, with contrast ratio $f_r$=2.4 $\pm$ 0.5, is also consistent with the large continuum crescent. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Comments: accepted in MNRAS

Auto-weighted Bayesian Physics-Informed Neural Networks and robust estimations for multitask inverse problems in pore-scale imaging of dissolution

Authors: Sarah Perez, Philippe Poncet

Abstract: In this article, we present a novel data assimilation strategy in pore-scale imaging and demonstrate that this makes it possible to robustly address reactive inverse problems incorporating Uncertainty Quantification (UQ). Pore-scale modeling of reactive flow offers a valuable opportunity to investigate the evolution of macro-scale properties subject to dynamic processes. Yet, they suffer from imag… ▽ More In this article, we present a novel data assimilation strategy in pore-scale imaging and demonstrate that this makes it possible to robustly address reactive inverse problems incorporating Uncertainty Quantification (UQ). Pore-scale modeling of reactive flow offers a valuable opportunity to investigate the evolution of macro-scale properties subject to dynamic processes. Yet, they suffer from imaging limitations arising from the associated X-ray microtomography (X-ray microCT) process, which induces discrepancies in the properties estimates. Assessment of the kinetic parameters also raises challenges, as reactive coefficients are critical parameters that can cover a wide range of values. We account for these two issues and ensure reliable calibration of pore-scale modeling, based on dynamical microCT images, by integrating uncertainty quantification in the workflow. The present method is based on a multitasking formulation of reactive inverse problems combining data-driven and physics-informed techniques in calcite dissolution. This allows quantifying morphological uncertainties on the porosity field and estimating reactive parameter ranges through prescribed PDE models with a latent concentration field and dynamical microCT. The data assimilation strategy relies on sequential reinforcement incorporating successively additional PDE constraints. We guarantee robust and unbiased uncertainty quantification by straightforward adaptive weighting of Bayesian Physics-Informed Neural Networks (BPINNs), ensuring reliable micro-porosity changes during geochemical transformations. We demonstrate successful Bayesian Inference in 1D+Time and 2D+Time calcite dissolution based on synthetic microCT images with meaningful posterior distribution on the reactive parameters and dimensionless numbers. △ Less

Submitted 17 August, 2024; v1 submitted 24 August, 2023; originally announced August 2023.

Journal ref: Computational Geosciences 28, pp. 1175-1215 (2024)

Spirals and clumps in V960 Mon: signs of planet formation via gravitational instability around an FU Ori star?

Authors: P. Weber, S. Pérez, A. Zurlo, J. Miley, A. Hales, L. Cieza, D. Principe, M. Cárcamo, A. Garufi, Á. Kóspál, M. Takami, J. Kastner, Z. Zhu, J. Williams

Abstract: The formation of giant planets has traditionally been divided into two pathways: core accretion and gravitational instability. However, in recent years, gravitational instability has become less favored, primarily due to the scarcity of observations of fragmented protoplanetary disks around young stars and low occurrence rate of massive planets on very wide orbits. In this study, we present a SPHE… ▽ More The formation of giant planets has traditionally been divided into two pathways: core accretion and gravitational instability. However, in recent years, gravitational instability has become less favored, primarily due to the scarcity of observations of fragmented protoplanetary disks around young stars and low occurrence rate of massive planets on very wide orbits. In this study, we present a SPHERE/IRDIS polarized light observation of the young outbursting object V960 Mon. The image reveals a vast structure of intricately shaped scattered light with several spiral arms. This finding motivated a re-analysis of archival ALMA 1.3 mm data acquired just two years after the onset of the outburst of V960 Mon. In these data, we discover several clumps of continuum emission aligned along a spiral arm that coincides with the scattered light structure. We interpret the localized emission as fragments formed from a spiral arm under gravitational collapse. Estimating the mass of solids within these clumps to be of several Earth masses, we suggest this observation to be the first evidence of gravitational instability occurring on planetary scales. This study discusses the significance of this finding for planet formation and its potential connection with the outbursting state of V960 Mon. △ Less

Submitted 25 July, 2023; originally announced July 2023.

Comments: Published in ApJL. 11 pages, 4 figures. Images available as fits files at https://github.com/yemsnucleus/V960_Mon_ApJL

Approximation of almost diagonal non-linear maps by lattice Lipschitz operators

Authors: Roger Arnau, Jose M. Calabuig, Ezgi Erdoğan, Enrique A. Sánchez Pérez

Abstract: Lattice Lipschitz operators define a new class of nonlinear Banach-lattice-valued maps that can be written as diagonal functions with respect to a certain basis. In the $n-$dimensional case, such a map can be represented as a vector of size $n$ of real-valued functions of one variable. In this paper we develop a method to approximate almost diagonal maps by means of lattice Lipschitz operators. Th… ▽ More Lattice Lipschitz operators define a new class of nonlinear Banach-lattice-valued maps that can be written as diagonal functions with respect to a certain basis. In the $n-$dimensional case, such a map can be represented as a vector of size $n$ of real-valued functions of one variable. In this paper we develop a method to approximate almost diagonal maps by means of lattice Lipschitz operators. The proposed technique is based on the approximation properties and error bounds obtained for these operators, together with a pointwise version of the interpolation of McShane and Whitney extension maps that can be applied to almost diagonal functions. In order to get the desired approximation, it is necessary to previously obtain an approximation to the set of eigenvectors of the original function. We focus on the explicit computation of error formulas and on illustrative examples to present our construction. △ Less

Submitted 3 July, 2023; originally announced July 2023.

MSC Class: 47J10