Showing 1–7 of 7 results for author: Pedretti, D

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Embedded Readout Electronics R&D for the Large PMTs in the JUNO Experiment

Authors: M. Bellato, A. Bergnoli, A. Brugnera, S. Chen, Z. Chen, B. Clerbaux, F. dal Corso, D. Corti, J. Dong, G. Galet, A. Garfagnini, A. Giaz, G. Gong, C. Grewing, J. Hu, R. Isocrate, X. Jiang, F. Li, I. Lippi, F. Marini, Z. Ning, A. G. Olshevskiyi, D. Pedretti, P. A. Petitjean, M. Robens , et al. (69 additional authors not shown)

Abstract: Jiangmen Underground neutrino Observatory (JUNO) is a next generation liquid scintillator neutrino experiment under construction phase in South China. Thanks to the anti-neutrinos produced by the nearby nuclear power plants, JUNO will primarily study the neutrino mass hierarchy, one of the open key questions in neutrino physics. One key ingredient for the success of the measurement is to use high… ▽ More Jiangmen Underground neutrino Observatory (JUNO) is a next generation liquid scintillator neutrino experiment under construction phase in South China. Thanks to the anti-neutrinos produced by the nearby nuclear power plants, JUNO will primarily study the neutrino mass hierarchy, one of the open key questions in neutrino physics. One key ingredient for the success of the measurement is to use high speed, high resolution sampling electronics located very close to the detector signal. Linearity in the response of the electronics in another important ingredient for the success of the experiment. During the initial design phase of the electronics, a custom design, with the Front-End and Read-Out electronics located very close to the detector analog signal has been developed and successfully tested. The present paper describes the electronics structure and the first tests performed on the prototypes. The electronics prototypes have been tested and they show good linearity response, with a maximum deviation of 1.3% over the full dynamic range (1-1000 p.e.), fulfilling the JUNO experiment requirements. △ Less

Submitted 17 May, 2020; v1 submitted 18 March, 2020; originally announced March 2020.

Comments: 20 pages, 15 figures

Distillation and stripping pilot plants for the JUNO neutrino detector: design, operations and reliability

Authors: P. Lombardi, M. Montuschi, A. Formozov, A. Brigatti, S. Parmeggiano, R. Pompilio, W. Depnering, S. Franke, R. Gaigher, J. Joutsenvaara, A. Mengucci, E. Meroni, H. Steiger, F. Mantovani, G. Ranucci, G. Andronico, V. Antonelli, M. Baldoncini, M. Bellato, E. Bernieri, R. Brugnera, A. Budano, M. Buscemi, S. Bussino, R. Caruso , et al. (46 additional authors not shown)

Abstract: This paper describes the design, construction principles and operations of the distillation and stripping pilot plants tested at the Daya Bay Neutrino Laboratory, with the perspective to adapt this processes, system cleanliness and leak-tightness to the final full scale plants that will be used for the purification of the liquid scintillator used in the JUNO neutrino detector. The main goal of the… ▽ More This paper describes the design, construction principles and operations of the distillation and stripping pilot plants tested at the Daya Bay Neutrino Laboratory, with the perspective to adapt this processes, system cleanliness and leak-tightness to the final full scale plants that will be used for the purification of the liquid scintillator used in the JUNO neutrino detector. The main goal of these plants is to remove radio impurities from the liquid scintillator while increasing its optical attenuation length. Purification of liquid scintillator will be performed with a system combining alumina oxide, distillation, water extraction and steam (or N2 gas) stripping. Such a combined system will aim at obtaining a total attenuation length greater than 20 m at 430 nm, and a bulk radiopurity for 238U and 232Th in the 10-15 to 10-17 g/g range. The pilot plants commissioning and operation have also provided valuable information on the degree of reliability of their main components, which will be particularly useful for the design of the final full scale purification equipment for the JUNO liquid scintillator. This paper describe two of the five pilot plants since the Alumina Column, Fluor mixing and the Water Extraction plants are in charge of the Chinese part of the collaboration. △ Less

Submitted 14 February, 2019; originally announced February 2019.

Journal ref: Nuclear Instrumentation and Methods in Physics Research A 925 (2019) 6

GIGJ: a crustal gravity model of the Guangdong Province for predicting the geoneutrino signal at the JUNO experiment

Authors: M. Reguzzoni, L. Rossi, M. Baldoncini, I. Callegari, P. Poli, D. Sampietro, V. Strati, F. Mantovani, G. Andronico, V. Antonelli, M. Bellato, E. Bernieri, A. Brigatti, R. Brugnera, A. Budano, M. Buscemi, S. Bussino, R. Caruso, D. Chiesa, D. Corti, F. Dal Corso, X. F. Ding, S. Dusini, A. Fabbri, G. Fiorentini , et al. (44 additional authors not shown)

Abstract: Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) e… ▽ More Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) experiment, currently under construction in the Guangdong Province (China). The a-priori modeling is based on the adoption of deep seismic sounding profiles, receiver functions, teleseismic P-wave velocity models and Moho depth maps, according to their own accuracy and spatial resolution. The inversion method allowed for integrating GOCE data with the a-priori information and regularization conditions through a Bayesian approach and a stochastic optimization. GIGJ fits the homogeneously distributed GOCE gravity data, characterized by high accuracy, with a ~1 mGal standard deviation of the residuals, compatible with the observation accuracy. Conversely to existing global models, GIGJ provides a site-specific subdivision of the crustal layers masses which uncertainties include estimation errors, associated to the gravimetric solution, and systematic uncertainties, related to the adoption of a fixed sedimentary layer. A consequence of this local rearrangement of the crustal layer thicknesses is a ~21% reduction and a ~24% increase of the middle and lower crust expected geoneutrino signal, respectively. Finally, the geophysical uncertainties of geoneutrino signals at JUNO produced by unitary uranium and thorium abundances distributed in the upper, middle and lower crust are reduced by 77%, 55% and 78%, respectively. The numerical model is available at http://www.fe.infn.it/u/radioactivity/GIGJ △ Less

Submitted 7 January, 2019; originally announced January 2019.

Comments: 35 pages, 9 figures, 4 tables

Journal ref: Journal of Geophysical Research: Solid Earth 124(4), 4231-4249, 2019

Nanoseconds Timing System Based on IEEE 1588 FPGA Implementation

Authors: D. Pedretti, M. Bellato, R. Isocrate, A. Bergnoli, R. Brugnera, D. Corti, F. Dal Corso, G. Galet, A. Garfagnini, A. Giaz, I. Lippi, F. Marini, G. Andronico, V. Antonelli, M. Baldoncini, E. Bernieri, A. Brigatti, A. Budano, M. Buscemi, S. Bussino, R. Caruso, D. Chiesa, C. Clementi, X. F. Ding, S. Dusini , et al. (32 additional authors not shown)

Abstract: Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of the process under investigation. These distributed data readout topologies rely on an accurate time information available at the frontend, where raw data are a… ▽ More Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of the process under investigation. These distributed data readout topologies rely on an accurate time information available at the frontend, where raw data are acquired and tagged with a precise timestamp prior to data buffering and central data collecting. This makes the network complexity and latency, between frontend and backend electronics, negligible within upper bounds imposed by the frontend data buffer capability. The proposed research work describes an FPGA implementation of IEEE 1588 Precision Time Protocol (PTP) that exploits the CERN Timing, Trigger and Control (TTC) system as a multicast messaging physical and data link layer. The hardware implementation extends the clock synchronization to the nanoseconds range, overcoming the typical accuracy limitations inferred by computers Ethernet based Local Area Network (LAN). Establishing a reliable communication between master and timing receiver nodes is essential in a message-based synchronization system. In the backend electronics, the serial data streams synchronization with the global clock domain is guaranteed by an hardware-based finite state machine that scans the bit period using a variable delay chain and finds the optimal sampling point. The validity of the proposed timing system has been proved in point-to-point data links as well as in star topology configurations over standard CAT-5e cables. The results achieved together with weaknesses and possible improvements are hereby detailed. △ Less

Submitted 19 June, 2018; v1 submitted 4 June, 2018; originally announced June 2018.

Comments: 8 pages, 14 figures, proceedings of 21st IEEE Real Time Conference Colonial Williamsburg 9-15 June 2018

Charge reconstruction in large-area photomultipliers

Authors: M. Grassi, M. Montuschi, M. Baldoncini, F. Mantovani, B. Ricci, G. Andronico, V. Antonelli, M. Bellato, E. Bernieri, A. Brigatti, R. Brugnera, A. Budano, M. Buscemi, S. Bussino, R. Caruso, D. Chiesa, D. Corti, F. Dal Corso, X. F. Ding, S. Dusini, A. Fabbri, G. Fiorentini, R. Ford, A. Formozov, G. Galet , et al. (38 additional authors not shown)

Abstract: Large-area PhotoMultiplier Tubes (PMT) allow to efficiently instrument Liquid Scintillator (LS) neutrino detectors, where large target masses are pivotal to compensate for neutrinos' extremely elusive nature. Depending on the detector light yield, several scintillation photons stemming from the same neutrino interaction are likely to hit a single PMT in a few tens/hundreds of nanoseconds, resultin… ▽ More Large-area PhotoMultiplier Tubes (PMT) allow to efficiently instrument Liquid Scintillator (LS) neutrino detectors, where large target masses are pivotal to compensate for neutrinos' extremely elusive nature. Depending on the detector light yield, several scintillation photons stemming from the same neutrino interaction are likely to hit a single PMT in a few tens/hundreds of nanoseconds, resulting in several photoelectrons (PEs) to pile-up at the PMT anode. In such scenario, the signal generated by each PE is entangled to the others, and an accurate PMT charge reconstruction becomes challenging. This manuscript describes an experimental method able to address the PMT charge reconstruction in the case of large PE pile-up, providing an unbiased charge estimator at the permille level up to 15 detected PEs. The method is based on a signal filtering technique (Wiener filter) which suppresses the noise due to both PMT and readout electronics, and on a Fourier-based deconvolution able to minimize the influence of signal distortions ---such as an overshoot. The analysis of simulated PMT waveforms shows that the slope of a linear regression modeling the relation between reconstructed and true charge values improves from $0.769 \pm 0.001$ (without deconvolution) to $0.989 \pm 0.001$ (with deconvolution), where unitary slope implies perfect reconstruction. A C++ implementation of the charge reconstruction algorithm is available online at http://www.fe.infn.it/CRA . △ Less

Submitted 26 January, 2018; originally announced January 2018.

Measuring differential rotation of the K-giant $ζ$\,And

Authors: Zs. Kővári, H. Korhonen, L. Kriskovics, K. Vida, J. -F. Donati, H. Le Coroller, J. D. Monnier E. Pedretti, P. Petit

Abstract: We investigate the temporal spot evolution of the K-giant component in the RS CVn-type binary system $ζ$\,Andromedae to establish its surface differential rotation. Doppler imaging is used to study three slightly overlapping spectroscopic datasets, obtained independently at three different observing sites. Each dataset covers one full stellar rotation with good phase coverage, and in total, result… ▽ More We investigate the temporal spot evolution of the K-giant component in the RS CVn-type binary system $ζ$\,Andromedae to establish its surface differential rotation. Doppler imaging is used to study three slightly overlapping spectroscopic datasets, obtained independently at three different observing sites. Each dataset covers one full stellar rotation with good phase coverage, and in total, results in a continuous coverage of almost three stellar rotations ($P_{\rm rot}=$17.8\,d). Therefore, these data are well suited for reconstructing surface temperature maps and studying temporal evolution in spot configurations. Surface differential rotation is measured by the means of cross-correlation of all the possible image pairs. The individual Doppler reconstructions well agree in the revealed spot pattern, recovering numerous low latitude spots with temperature contrasts of up to $\approx$1000\,K with respect to the unspotted photosphere, and also an asymmetric polar cap which is diminishing with time. Our detailed cross-correlation study consistently indicate solar-type differential rotation with an average surface shear $α\approx0.055$, in agreement with former results. △ Less

Submitted 13 January, 2012; originally announced January 2012.

Comments: accepted for publication in A&A, 4 pages, 3 figures