-
Advancing Fluid-Based Thermal Management Systems Design: Leveraging Graph Neural Networks for Graph Regression and Efficient Enumeration Reduction
Authors:
Saeid Bayat,
Nastaran Shahmansouri,
Satya RT Peddada,
Alex Tessier,
Adrian Butscher,
James T Allison
Abstract:
In this research, we developed a graph-based framework to represent various aspects of optimal thermal management system design, with the aim of rapidly and efficiently identifying optimal design candidates. Initially, the graph-based framework is utilized to generate diverse thermal management system architectures. The dynamics of these system architectures are modeled under various loading condi…
▽ More
In this research, we developed a graph-based framework to represent various aspects of optimal thermal management system design, with the aim of rapidly and efficiently identifying optimal design candidates. Initially, the graph-based framework is utilized to generate diverse thermal management system architectures. The dynamics of these system architectures are modeled under various loading conditions, and an open-loop optimal controller is employed to determine each system's optimal performance. These modeled cases constitute the dataset, with the corresponding optimal performance values serving as the labels for the data. In the subsequent step, a Graph Neural Network (GNN) model is trained on 30% of the labeled data to predict the systems' performance, effectively addressing a regression problem. Utilizing this trained model, we estimate the performance values for the remaining 70% of the data, which serves as the test set. In the third step, the predicted performance values are employed to rank the test data, facilitating prioritized evaluation of the design scenarios. Specifically, a small subset of the test data with the highest estimated ranks undergoes evaluation via the open-loop optimal control solver. This targeted approach concentrates on evaluating higher-ranked designs identified by the GNN, replacing the exhaustive search (enumeration-based) of all design cases. The results demonstrate a significant average reduction of over 92% in the number of system dynamic modeling and optimal control analyses required to identify optimal design scenarios.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Extracting Design Knowledge from Optimization Data: Enhancing Engineering Design in Fluid Based Thermal Management Systems
Authors:
Saeid Bayat,
Nastaran Shahmansouri,
Satya RT Peddada,
Alex Tessier,
Adrian Butscher,
James T Allison
Abstract:
As mechanical systems become more complex and technological advances accelerate, the traditional reliance on heritage designs for engineering endeavors is being diminished in its effectiveness. Considering the dynamic nature of the design industry where new challenges are continually emerging, alternative sources of knowledge need to be sought to guide future design efforts. One promising avenue l…
▽ More
As mechanical systems become more complex and technological advances accelerate, the traditional reliance on heritage designs for engineering endeavors is being diminished in its effectiveness. Considering the dynamic nature of the design industry where new challenges are continually emerging, alternative sources of knowledge need to be sought to guide future design efforts. One promising avenue lies in the analysis of design optimization data, which has the potential to offer valuable insights and overcome the limitations of heritage designs. This paper presents a step toward extracting knowledge from optimization data in multi-split fluid-based thermal management systems using different classification machine learning methods, so that designers can use it to guide decisions in future design efforts. This approach offers several advantages over traditional design heritage methods, including applicability in cases where there is no design heritage and the ability to derive optimal designs. We showcase our framework through four case studies with varying levels of complexity. These studies demonstrate its effectiveness in enhancing the design of complex thermal management systems. Our results show that the knowledge extracted from the configuration design optimization data provides a good basis for more general design of complex thermal management systems. It is shown that the objective value of the estimated optimal configuration closely approximates the true optimal configuration with less than 1 percent error, achieved using basic features based on the system heat loads without involving the corresponding optimal open loop control (OLOC) features. This eliminates the need to solve the OLOC problem, leading to reduced computation costs.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Multi-split configuration design for fluid-based thermal management systems
Authors:
Saeid Bayat,
Nastaran Shahmansouri,
Satya RT Peddada,
Alexander Tessier,
Adrian Butscher,
James T Allison
Abstract:
High power density systems require efficient cooling to maintain their thermal performance. Despite this, as systems get larger and more complex, human practice and insight may not suffice to determine the desired thermal management system designs. To this end, a framework for automatic architecture exploration is presented in this article for a class of single-phase, multi-split cooling systems.…
▽ More
High power density systems require efficient cooling to maintain their thermal performance. Despite this, as systems get larger and more complex, human practice and insight may not suffice to determine the desired thermal management system designs. To this end, a framework for automatic architecture exploration is presented in this article for a class of single-phase, multi-split cooling systems. For this class of systems, heat generation devices are clustered based on their spatial information, and flow-split are added only when required and at the location of heat devices. To generate different architectures, candidate architectures are represented as graphs. From these graphs, dynamic physics models are created automatically using a graph-based thermal modeling framework. Then, an optimal fluid flow distribution problem is solved by addressing temperature constraints in the presence of exogenous heat loads to achieve optimal performance. The focus in this work is on the design of general multi-split heat management systems. The architectures discussed here can be used for various applications in the domain of configuration design. The multi-split algorithm can produce configurations where splitting can occur at any of the vertices. The results presented include 3 categories of cases and are discussed in detail.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Mediation Analysis using Semi-parametric Shape-Restricted Regression with Applications
Authors:
Qing Yin,
Jong-Hyeon Jeong,
Xu Qin,
Shyamal D Peddada,
Jennifer Adibi
Abstract:
Often linear regression is used to perform mediation analysis. However, in many instances, the underlying relationships may not be linear, as in the case of placental-fetal hormones and fetal development. Although, the exact functional form of the relationship may be unknown, one may hypothesize the general shape of the relationship. For these reasons, we develop a novel shape-restricted inference…
▽ More
Often linear regression is used to perform mediation analysis. However, in many instances, the underlying relationships may not be linear, as in the case of placental-fetal hormones and fetal development. Although, the exact functional form of the relationship may be unknown, one may hypothesize the general shape of the relationship. For these reasons, we develop a novel shape-restricted inference-based methodology for conducting mediation analysis. This work is motivated by an application in fetal endocrinology where researchers are interested in understanding the effects of pesticide application on birth weight, with human chorionic gonadotropin (hCG) as the mediator. We assume a practically plausible set of nonlinear effects of hCG on the birth weight and a linear relationship between pesticide exposure and hCG, with both exposure-outcome and exposure-mediator models being linear in the confounding factors. Using the proposed methodology on a population-level prenatal screening program data, with hCG as the mediator, we discovered that, while the natural direct effects suggest a positive association between pesticide application and birth weight, the natural indirect effects were negative.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Pinch-off of bubbles in a polymer solution
Authors:
Sreeram Rajesh,
Sumukh S Peddada,
Virgile Thiévenaz,
Alban Sauret
Abstract:
The formation of gas bubbles in a liquid occurs in various engineering processes, such as during foam generation or agitation and mixing in bubbly flows. A challenge in describing the initial formation of a gas bubble is due to the singular behavior at pinch-off. Past experiments in Newtonian fluids have shown that the minimum neck radius follows a power-law evolution shortly before the break-up.…
▽ More
The formation of gas bubbles in a liquid occurs in various engineering processes, such as during foam generation or agitation and mixing in bubbly flows. A challenge in describing the initial formation of a gas bubble is due to the singular behavior at pinch-off. Past experiments in Newtonian fluids have shown that the minimum neck radius follows a power-law evolution shortly before the break-up. The exponent of the power-law depends on the viscosity of the surrounding Newtonian liquid, and ranges from 0.5 for low viscosity to 1 for large viscosity. However, bubble formation in a viscoelastic polymer solution remains unclear, and in particular, if the evolution is still captured by a power-law and how the exponent varies with the polymer concentration. In this study, we use high-speed imaging to analyze the bubble pinch-off in solutions of polymers. We characterize the time evolution of the neck radius when varying the concentration and thus the characteristic relaxation time and describe the influence of viscoelasticity on the bubble pinch-off. Our results reveal that the presence of polymers does not influence the thinning until the latter stages, when their presence in sufficient concentration delays the pinch-off.
△ Less
Submitted 13 September, 2022; v1 submitted 13 September, 2022;
originally announced September 2022.
-
Enumeration and Identification of Unique 3D Spatial Topologies of Interconnected Engineering Systems Using Spatial Graphs
Authors:
Satya R. T. Peddada,
Nathan M. Dunfield,
Lawrence E. Zeidner,
Zane R. Givans,
Kai A. James,
James T. Allison
Abstract:
Systematic enumeration and identification of unique 3D spatial topologies of complex engineering systems (such as automotive cooling systems, electric power trains, satellites, and aero-engines) are essential to navigation of these expansive design spaces with the goal of identifying new spatial configurations that can satisfy challenging system requirements. However, efficient navigation through…
▽ More
Systematic enumeration and identification of unique 3D spatial topologies of complex engineering systems (such as automotive cooling systems, electric power trains, satellites, and aero-engines) are essential to navigation of these expansive design spaces with the goal of identifying new spatial configurations that can satisfy challenging system requirements. However, efficient navigation through discrete 3D spatial topology (ST) options is a very challenging problem due to its combinatorial nature and can quickly exceed human cognitive abilities at even moderate complexity levels. This article presents a new, efficient, and scalable design framework that leverages mathematical spatial graph theory to represent, enumerate, and identify distinctive 3D topological classes for a generic 3D engineering system, given its system architecture (SA) -- its components and their interconnections. First, spatial graph diagrams (SGDs) are generated for a given SA from zero to a specified maximum number of interconnect crossings. Then, corresponding Yamada polynomials for all the planar SGDs are generated. SGDs are categorized into topological classes, each of which shares a unique Yamada polynomial. Finally, within each topological class, 3D geometric models are generated using the spatial graph diagrams (SGDs) having different numbers of interconnect crossings. Selected case studies are presented to illustrate the different features of our proposed framework, including an industrial engineering design application: ST enumeration of a 3D automotive fuel cell cooling system (AFCS). Design guidelines are also provided for practicing engineers to aid the application of this framework to different types of real-world problems such as configuration design and spatial packaging optimization.
△ Less
Submitted 20 July, 2023; v1 submitted 28 July, 2021;
originally announced July 2021.
-
Analysis of High Dimensional Compositional Data Containing Structural Zeros with Applications to Microbiome Data
Authors:
Abhishek Kaul,
Ori Davidov,
Shyamal D. Peddada
Abstract:
This paper is motivated by the recent interest in the analysis of high dimen- sional microbiome data. A key feature of this data is the presence of `structural zeros' which are microbes missing from an observation vector due to an underlying biological process and not due to error in measurement. Typical notions of missingness are insufficient to model these structural zeros. We define a general f…
▽ More
This paper is motivated by the recent interest in the analysis of high dimen- sional microbiome data. A key feature of this data is the presence of `structural zeros' which are microbes missing from an observation vector due to an underlying biological process and not due to error in measurement. Typical notions of missingness are insufficient to model these structural zeros. We define a general framework which allows for structural zeros in the model and propose methods of estimating sparse high dimensional covariance and precision matrices under this setup. We establish error bounds in the spectral and frobenius norms for the proposed esti- mators and empirically support them with a simulation study. We also apply the proposed methodology to the global human gut microbiome data of Yatsunenko (2012).
△ Less
Submitted 19 May, 2016;
originally announced May 2016.
-
The linear stochastic order and directed inference for multivariate ordered distributions
Authors:
Ori Davidov,
Shyamal Peddada
Abstract:
Researchers are often interested in drawing inferences regarding the order between two experimental groups on the basis of multivariate response data. Since standard multivariate methods are designed for two-sided alternatives, they may not be ideal for testing for order between two groups. In this article we introduce the notion of the linear stochastic order and investigate its properties. Stati…
▽ More
Researchers are often interested in drawing inferences regarding the order between two experimental groups on the basis of multivariate response data. Since standard multivariate methods are designed for two-sided alternatives, they may not be ideal for testing for order between two groups. In this article we introduce the notion of the linear stochastic order and investigate its properties. Statistical theory and methodology are developed to both estimate the direction which best separates two arbitrary ordered distributions and to test for order between the two groups. The new methodology generalizes Roy's classical largest root test to the nonparametric setting and is applicable to random vectors with discrete and/or continuous components. The proposed methodology is illustrated using data obtained from a 90-day pre-chronic rodent cancer bioassay study conducted by the National Toxicology Program (NTP).
△ Less
Submitted 8 March, 2013;
originally announced March 2013.
-
Statistical inference under order restrictions on both rows and columns of a matrix, with an application in toxicology
Authors:
Eric Teoh,
Abraham Nyska,
Uri Wormser,
Shyamal D. Peddada
Abstract:
We present a general methodology for performing statistical inference on the components of a real-valued matrix parameter for which rows and columns are subject to order restrictions. The proposed estimation procedure is based on an iterative algorithm developed by Dykstra and Robertson (1982) for simple order restriction on rows and columns of a matrix. For any order restrictions on rows and co…
▽ More
We present a general methodology for performing statistical inference on the components of a real-valued matrix parameter for which rows and columns are subject to order restrictions. The proposed estimation procedure is based on an iterative algorithm developed by Dykstra and Robertson (1982) for simple order restriction on rows and columns of a matrix. For any order restrictions on rows and columns of a matrix, sufficient conditions are derived for the algorithm to converge in a single application of row and column operations. The new algorithm is applicable to a broad collection of order restrictions. In practice, it is easy to design a study such that the sufficient conditions derived in this paper are satisfied. For instance, the sufficient conditions are satisfied in a balanced design. Using the estimation procedure developed in this article, a bootstrap test for order restrictions on rows and columns of a matrix is proposed. Computer simulations for ordinal data were performed to compare the proposed test with some existing test procedures in terms of size and power. The new methodology is illustrated by applying it to a set of ordinal data obtained from a toxicological study.
△ Less
Submitted 15 May, 2008;
originally announced May 2008.
