Showing 1–25 of 25 results for author: Patil, U

Topology Reconstruction of a Class of Electrical Networks with Limited Boundary Measurements

Authors: Shivanagouda Biradar, Deepak U Patil

Abstract: We consider the problem of recovering the topology and the edge conductance value, as well as characterizing a set of electrical networks that satisfy the limitedly available Thevenin impedance measurements. The measurements are obtained from an unknown electrical network, which is assumed to belong to a class of circular planar passive electrical network. This class of electrical networks consist… ▽ More We consider the problem of recovering the topology and the edge conductance value, as well as characterizing a set of electrical networks that satisfy the limitedly available Thevenin impedance measurements. The measurements are obtained from an unknown electrical network, which is assumed to belong to a class of circular planar passive electrical network. This class of electrical networks consists of R, RL, and RC networks whose edge impedance values are equal, and the absolute value of the real and the imaginary part of the edge impedances are also equal. To solve the topology reconstruction and the set characterization problem, we establish a simple relation between Thevenin impedance and the Laplacian matrix and leverage this relation to get a system of multivariate polynomial equations, whose solution is a set of all electrical networks satisfying the limited available Thevenin's impedance measurements. To confine the search space and generate valid electrical networks, we impose the triangle and Kalmanson's inequality as constraints. The solution to a constrained system of multivariate polynomial equations is a set of reconstructed valid electrical networks. For simple algorithmic solutions, we use Gröbner basis polynomials. This paper shows that the triangle and the Kalmanson's inequality holds for general circular planar passive R, RL, and RC electrical networks if certain boundary conditions lie within a convex cone. Numerical examples illustrate the developed topology reconstruction method. △ Less

Submitted 4 December, 2024; originally announced December 2024.

Topology Reconstruction of a Resistor Network with Limited Boundary Measurements: An Optimization Approach

Authors: Shivanagouda Biradar, Deepak U Patil

Abstract: A problem of reconstruction of the topology and the respective edge resistance values of an unknown circular planar passive resistive network using limitedly available resistance distance measurements is considered. We develop a multistage topology reconstruction method, assuming that the number of boundary and interior nodes, the maximum and minimum edge conductance, and the Kirchhoff index are k… ▽ More A problem of reconstruction of the topology and the respective edge resistance values of an unknown circular planar passive resistive network using limitedly available resistance distance measurements is considered. We develop a multistage topology reconstruction method, assuming that the number of boundary and interior nodes, the maximum and minimum edge conductance, and the Kirchhoff index are known apriori. First, a maximal circular planar electrical network consisting of edges with resistors and switches is constructed; no interior nodes are considered. A sparse difference in convex program $\mathbfΠ_1$ accompanied by round down algorithm is posed to determine the switch positions. The solution gives us a topology that is then utilized to develop a heuristic method to place the interior nodes. The heuristic method consists of reformulating $\mathbfΠ_1$ as a difference of convex program $\mathbfΠ_2$ with relaxed edge weight constraints and the quadratic cost. The interior node placement thus obtained may lead to a non-planar topology. We then use the modified Auslander, Parter, and Goldstein algorithm to obtain a set of planar network topologies and re-optimize the edge weights by solving $\mathbfΠ_3$ for each topology. Optimization problems posed are difference of convex programming problem, as a consequence of constraints triangle inequality and the Kalmansons inequality. A numerical example is used to demonstrate the proposed method. △ Less

Submitted 3 December, 2024; originally announced December 2024.

Label Sharing Incremental Learning Framework for Independent Multi-Label Segmentation Tasks

Authors: Deepa Anand, Bipul Das, Vyshnav Dangeti, Antony Jerald, Rakesh Mullick, Uday Patil, Pakhi Sharma, Prasad Sudhakar

Abstract: In a setting where segmentation models have to be built for multiple datasets, each with its own corresponding label set, a straightforward way is to learn one model for every dataset and its labels. Alternatively, multi-task architectures with shared encoders and multiple segmentation heads or shared weights with compound labels can also be made use of. This work proposes a novel label sharing fr… ▽ More In a setting where segmentation models have to be built for multiple datasets, each with its own corresponding label set, a straightforward way is to learn one model for every dataset and its labels. Alternatively, multi-task architectures with shared encoders and multiple segmentation heads or shared weights with compound labels can also be made use of. This work proposes a novel label sharing framework where a shared common label space is constructed and each of the individual label sets are systematically mapped to the common labels. This transforms multiple datasets with disparate label sets into a single large dataset with shared labels, and therefore all the segmentation tasks can be addressed by learning a single model. This eliminates the need for task specific adaptations in network architectures and also results in parameter and data efficient models. Furthermore, label sharing framework is naturally amenable for incremental learning where segmentations for new datasets can be easily learnt. We experimentally validate our method on various medical image segmentation datasets, each involving multi-label segmentation. Furthermore, we demonstrate the efficacy of the proposed method in terms of performance and incremental learning ability vis-a-vis alternative methods. △ Less

Submitted 17 November, 2024; originally announced November 2024.

ROS2-Based Simulation Framework for Cyberphysical Security Analysis of UAVs

Authors: Unmesh Patil, Akshith Gunasekaran, Rakesh Bobba, Houssam Abbas

Abstract: We present a new simulator of Uncrewed Aerial Vehicles (UAVs) that is tailored to the needs of testing cyber-physical security attacks and defenses. Recent investigations into UAV safety have unveiled various attack surfaces and some defense mechanisms. However, due to escalating regulations imposed by aviation authorities on security research on real UAVs, and the substantial costs asso… ▽ More We present a new simulator of Uncrewed Aerial Vehicles (UAVs) that is tailored to the needs of testing cyber-physical security attacks and defenses. Recent investigations into UAV safety have unveiled various attack surfaces and some defense mechanisms. However, due to escalating regulations imposed by aviation authorities on security research on real UAVs, and the substantial costs associated with hardware test-bed configurations, there arises a necessity for a simulator capable of substituting for hardware experiments, and/or narrowing down their scope to the strictly necessary. The study of different attack mechanisms requires specific features in a simulator. We propose a simulation framework based on ROS2, leveraging some of its key advantages, including modularity, replicability, customization, and the utilization of open-source tools such as Gazebo. Our framework has a built-in motion planner, controller, communication models and attack models. We share examples of research use cases that our framework can enable, demonstrating its utility. △ Less

Submitted 4 October, 2024; originally announced October 2024.

LSST: Learned Single-Shot Trajectory and Reconstruction Network for MR Imaging

Authors: Hemant Kumar Aggarwal, Sudhanya Chatterjee, Dattesh Shanbhag, Uday Patil, K. V. S. Hari

Abstract: Single-shot magnetic resonance (MR) imaging acquires the entire k-space data in a single shot and it has various applications in whole-body imaging. However, the long acquisition time for the entire k-space in single-shot fast spin echo (SSFSE) MR imaging poses a challenge, as it introduces T2-blur in the acquired images. This study aims to enhance the reconstruction quality of SSFSE MR images by… ▽ More Single-shot magnetic resonance (MR) imaging acquires the entire k-space data in a single shot and it has various applications in whole-body imaging. However, the long acquisition time for the entire k-space in single-shot fast spin echo (SSFSE) MR imaging poses a challenge, as it introduces T2-blur in the acquired images. This study aims to enhance the reconstruction quality of SSFSE MR images by (a) optimizing the trajectory for measuring the k-space, (b) acquiring fewer samples to speed up the acquisition process, and (c) reducing the impact of T2-blur. The proposed method adheres to physics constraints due to maximum gradient strength and slew-rate available while optimizing the trajectory within an end-to-end learning framework. Experiments were conducted on publicly available fastMRI multichannel dataset with 8-fold and 16-fold acceleration factors. An experienced radiologist's evaluation on a five-point Likert scale indicates improvements in the reconstruction quality as the ACL fibers are sharper than comparative methods. △ Less

Submitted 8 August, 2024; originally announced September 2024.

Covariant Jacobi-Legendre expansion for total energy calculations within the projector-augmented-wave formalism

Authors: Bruno Focassio, Michelangelo Domina, Urvesh Patil, Adalberto Fazzio, Stefano Sanvito

Abstract: Machine-learning models can be trained to predict the converged electron charge density of a density functional theory (DFT) calculation. In general, the value of the density at a given point in space is invariant under global translations and rotations having that point as a centre. Hence, one can construct locally invariant machine-learning density predictors. However, the widely used projector… ▽ More Machine-learning models can be trained to predict the converged electron charge density of a density functional theory (DFT) calculation. In general, the value of the density at a given point in space is invariant under global translations and rotations having that point as a centre. Hence, one can construct locally invariant machine-learning density predictors. However, the widely used projector augmented wave (PAW) implementation of DFT requires the evaluation of the one-center augmentation contributions, that are not rotationally invariant. Building on our recently proposed Jacobi-Legendre charge-density scheme, we construct a covariant Jacobi-Legendre model capable of predicting the local occupancies needed to compose the augmentation charge density. Our formalism is then applied to the prediction of the energy barrier for the 1H-to-1T phase transition of two-dimensional MoS$_2$. With extremely modest training, the model is capable of performing a non-self-consistent nudged elastic band calculation at virtually the same accuracy as a fully DFT-converged one, thus saving thousands of self-consistent DFT steps. Furthermore, at variance with machine-learning force fields, the charge density is here available for any nudged elastic band image, so that we can trace the evolution of the electronic structure across the phase transition. △ Less

Submitted 2 October, 2024; v1 submitted 2 August, 2024; originally announced August 2024.

Comments: 12 pages, 4 figures

NTIRE 2024 Challenge on Low Light Image Enhancement: Methods and Results

Authors: Xiaoning Liu, Zongwei Wu, Ao Li, Florin-Alexandru Vasluianu, Yulun Zhang, Shuhang Gu, Le Zhang, Ce Zhu, Radu Timofte, Zhi Jin, Hongjun Wu, Chenxi Wang, Haitao Ling, Yuanhao Cai, Hao Bian, Yuxin Zheng, Jing Lin, Alan Yuille, Ben Shao, Jin Guo, Tianli Liu, Mohao Wu, Yixu Feng, Shuo Hou, Haotian Lin , et al. (87 additional authors not shown)

Abstract: This paper reviews the NTIRE 2024 low light image enhancement challenge, highlighting the proposed solutions and results. The aim of this challenge is to discover an effective network design or solution capable of generating brighter, clearer, and visually appealing results when dealing with a variety of conditions, including ultra-high resolution (4K and beyond), non-uniform illumination, backlig… ▽ More This paper reviews the NTIRE 2024 low light image enhancement challenge, highlighting the proposed solutions and results. The aim of this challenge is to discover an effective network design or solution capable of generating brighter, clearer, and visually appealing results when dealing with a variety of conditions, including ultra-high resolution (4K and beyond), non-uniform illumination, backlighting, extreme darkness, and night scenes. A notable total of 428 participants registered for the challenge, with 22 teams ultimately making valid submissions. This paper meticulously evaluates the state-of-the-art advancements in enhancing low-light images, reflecting the significant progress and creativity in this field. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: NTIRE 2024 Challenge Report

The Ninth NTIRE 2024 Efficient Super-Resolution Challenge Report

Authors: Bin Ren, Yawei Li, Nancy Mehta, Radu Timofte, Hongyuan Yu, Cheng Wan, Yuxin Hong, Bingnan Han, Zhuoyuan Wu, Yajun Zou, Yuqing Liu, Jizhe Li, Keji He, Chao Fan, Heng Zhang, Xiaolin Zhang, Xuanwu Yin, Kunlong Zuo, Bohao Liao, Peizhe Xia, Long Peng, Zhibo Du, Xin Di, Wangkai Li, Yang Wang , et al. (109 additional authors not shown)

Abstract: This paper provides a comprehensive review of the NTIRE 2024 challenge, focusing on efficient single-image super-resolution (ESR) solutions and their outcomes. The task of this challenge is to super-resolve an input image with a magnification factor of x4 based on pairs of low and corresponding high-resolution images. The primary objective is to develop networks that optimize various aspects such… ▽ More This paper provides a comprehensive review of the NTIRE 2024 challenge, focusing on efficient single-image super-resolution (ESR) solutions and their outcomes. The task of this challenge is to super-resolve an input image with a magnification factor of x4 based on pairs of low and corresponding high-resolution images. The primary objective is to develop networks that optimize various aspects such as runtime, parameters, and FLOPs, while still maintaining a peak signal-to-noise ratio (PSNR) of approximately 26.90 dB on the DIV2K_LSDIR_valid dataset and 26.99 dB on the DIV2K_LSDIR_test dataset. In addition, this challenge has 4 tracks including the main track (overall performance), sub-track 1 (runtime), sub-track 2 (FLOPs), and sub-track 3 (parameters). In the main track, all three metrics (ie runtime, FLOPs, and parameter count) were considered. The ranking of the main track is calculated based on a weighted sum-up of the scores of all other sub-tracks. In sub-track 1, the practical runtime performance of the submissions was evaluated, and the corresponding score was used to determine the ranking. In sub-track 2, the number of FLOPs was considered. The score calculated based on the corresponding FLOPs was used to determine the ranking. In sub-track 3, the number of parameters was considered. The score calculated based on the corresponding parameters was used to determine the ranking. RLFN is set as the baseline for efficiency measurement. The challenge had 262 registered participants, and 34 teams made valid submissions. They gauge the state-of-the-art in efficient single-image super-resolution. To facilitate the reproducibility of the challenge and enable other researchers to build upon these findings, the code and the pre-trained model of validated solutions are made publicly available at https://github.com/Amazingren/NTIRE2024_ESR/. △ Less

Submitted 25 June, 2024; v1 submitted 16 April, 2024; originally announced April 2024.

Comments: The report paper of NTIRE2024 Efficient Super-resolution, accepted by CVPRW2024

NTIRE 2024 Challenge on Image Super-Resolution ($\times$4): Methods and Results

Authors: Zheng Chen, Zongwei Wu, Eduard Zamfir, Kai Zhang, Yulun Zhang, Radu Timofte, Xiaokang Yang, Hongyuan Yu, Cheng Wan, Yuxin Hong, Zhijuan Huang, Yajun Zou, Yuan Huang, Jiamin Lin, Bingnan Han, Xianyu Guan, Yongsheng Yu, Daoan Zhang, Xuanwu Yin, Kunlong Zuo, Jinhua Hao, Kai Zhao, Kun Yuan, Ming Sun, Chao Zhou , et al. (63 additional authors not shown)

Abstract: This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge i… ▽ More This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge is to obtain designs/solutions with the most advanced SR performance, with no constraints on computational resources (e.g., model size and FLOPs) or training data. The track of this challenge assesses performance with the PSNR metric on the DIV2K testing dataset. The competition attracted 199 registrants, with 20 teams submitting valid entries. This collective endeavour not only pushes the boundaries of performance in single-image SR but also offers a comprehensive overview of current trends in this field. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: NTIRE 2024 webpage: https://cvlai.net/ntire/2024. Code: https://github.com/zhengchen1999/NTIRE2024_ImageSR_x4

Measurement of Nanoscale Interfacial Contact Area Using Vibrational Spectroscopy

Authors: Utkarsh Patil, Stephen Merriman, Shubhendu Kumar, Ali Dhinojwala

Abstract: Understanding the extent of contact between objects is crucial for surface-driven phenomena in the natural world. While interactions are known to occur at subnanometer-length scales, the techniques needed to measure such small-length scales are lacking. We combined two complementary techniques of attenuated total reflectance infrared (ATR-IR) spectroscopy coupled with an imaging detector and sum f… ▽ More Understanding the extent of contact between objects is crucial for surface-driven phenomena in the natural world. While interactions are known to occur at subnanometer-length scales, the techniques needed to measure such small-length scales are lacking. We combined two complementary techniques of attenuated total reflectance infrared (ATR-IR) spectroscopy coupled with an imaging detector and sum frequency generation (SFG) spectroscopy to characterize the real contact area between surfaces. Imaging ATR-IR provides the distribution of airgap separation between the surfaces at larger than molecular length scales as well as an estimation of the real contact area. Additionally, SFG directly probes the intermolecular interactions occurring at molecular scales. Through the combination of these techniques, we show how contact is achieved for both thin, rigid/glassy polymer films on top of soft elastomers and rigid/glassy samples. Interestingly, we also show that the orientation of the molecules in contact is a critically important factor that influences interfacial interactions rather than just the number of molecular sites in contact. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Predicting The One-Particle Density Matrix With Machine Learning

Authors: S. Hazra, U. Patil, S. Sanvito

Abstract: Two of the most widely used electronic structure theory methods, namely Hartree-Fock and Kohn-Sham density functional theory, both requires the iterative solution of a set of Schrödinger-like equations. The speed of convergence of such self-consistent field process depends on the complexity of the system under investigation and on the initial guess for the density matrix. An initial density matrix… ▽ More Two of the most widely used electronic structure theory methods, namely Hartree-Fock and Kohn-Sham density functional theory, both requires the iterative solution of a set of Schrödinger-like equations. The speed of convergence of such self-consistent field process depends on the complexity of the system under investigation and on the initial guess for the density matrix. An initial density matrix close to the ground-state one will effectively allow one to cut out many of the self-consistent steps necessary to achieve convergence. Here, we predict the density matrix of Kohn-Sham density functional theory by constructing a neural network, which uses the atomic positions as only information. Such neural network provides an initial guess for the density matrix far superior to any other recipes available, in particular for molecules with metallic bonds. Furthermore, the quality of such neural-network density matrix is good enough for the evaluation of interatomic forces. This allows us to run accelerated {\it ab-initio} molecular dynamics with little to no self-consistent steps. △ Less

Submitted 5 June, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Journal ref: J. Chem. Theory Comput, 1549-9618, 2024

Approximate Dynamic Programming based Model Predictive Control of Nonlinear systems

Authors: Keerthi Chacko, Midhun T. Augustine, S. Janardhanan, Deepak U. Patil, I. N. Kar

Abstract: This paper studies the optimal control problem for discrete-time nonlinear systems and an approximate dynamic programming-based Model Predictive Control (MPC) scheme is proposed for minimizing a quadratic performance measure. In the proposed approach, the value function is approximated as a quadratic function for which the parametric matrix is computed using a switched system approximate of the no… ▽ More This paper studies the optimal control problem for discrete-time nonlinear systems and an approximate dynamic programming-based Model Predictive Control (MPC) scheme is proposed for minimizing a quadratic performance measure. In the proposed approach, the value function is approximated as a quadratic function for which the parametric matrix is computed using a switched system approximate of the nonlinear system. The approach is modified further using a multi-stage scheme to improve the control accuracy and an extension to incorporate state constraints. The MPC scheme is validated experimentally on a multi-tank system which is modeled as a third-order nonlinear system. The experimental results show the proposed MPC scheme results in significantly lesser online computation compared to the Nonlinear MPC scheme. △ Less

Submitted 10 December, 2023; originally announced December 2023.

One-shot Localization and Segmentation of Medical Images with Foundation Models

Authors: Deepa Anand, Gurunath Reddy M, Vanika Singhal, Dattesh D. Shanbhag, Shriram KS, Uday Patil, Chitresh Bhushan, Kavitha Manickam, Dawei Gui, Rakesh Mullick, Avinash Gopal, Parminder Bhatia, Taha Kass-Hout

Abstract: Recent advances in Vision Transformers (ViT) and Stable Diffusion (SD) models with their ability to capture rich semantic features of the image have been used for image correspondence tasks on natural images. In this paper, we examine the ability of a variety of pre-trained ViT (DINO, DINOv2, SAM, CLIP) and SD models, trained exclusively on natural images, for solving the correspondence problems o… ▽ More Recent advances in Vision Transformers (ViT) and Stable Diffusion (SD) models with their ability to capture rich semantic features of the image have been used for image correspondence tasks on natural images. In this paper, we examine the ability of a variety of pre-trained ViT (DINO, DINOv2, SAM, CLIP) and SD models, trained exclusively on natural images, for solving the correspondence problems on medical images. While many works have made a case for in-domain training, we show that the models trained on natural images can offer good performance on medical images across different modalities (CT,MR,Ultrasound) sourced from various manufacturers, over multiple anatomical regions (brain, thorax, abdomen, extremities), and on wide variety of tasks. Further, we leverage the correspondence with respect to a template image to prompt a Segment Anything (SAM) model to arrive at single shot segmentation, achieving dice range of 62%-90% across tasks, using just one image as reference. We also show that our single-shot method outperforms the recently proposed few-shot segmentation method - UniverSeg (Dice range 47%-80%) on most of the semantic segmentation tasks(six out of seven) across medical imaging modalities. △ Less

Submitted 28 October, 2023; originally announced October 2023.

Comments: Accepted at NeurIPS 2023 R0-FoMo Workshop

The role of solvent interfacial structural ordering in maintaining stable graphene dispersions

Authors: Urvesh Patil, Nuala M. Caffrey

Abstract: Liquid phase exfoliation (LPE) is the most promising method for the low-cost, scalable production of two-dimensional nanosheets from their bulk counterparts. Extensive exfoliation occurs in most solvents due to the huge amount of energy introduced by sonication or shear mixing. However, the subsequent dispersion is not always stable, with extensive reaggregation occurring in some solvents. Identif… ▽ More Liquid phase exfoliation (LPE) is the most promising method for the low-cost, scalable production of two-dimensional nanosheets from their bulk counterparts. Extensive exfoliation occurs in most solvents due to the huge amount of energy introduced by sonication or shear mixing. However, the subsequent dispersion is not always stable, with extensive reaggregation occurring in some solvents. Identifying the optimal solvent for a particular layered material is difficult and requires a fundamental understanding of the mechanism involved in maintaining a stable dispersion. Here, we use molecular dynamics calculations to show that when graphene is immersed in a solvent, distinct solvation layers are formed irrespective of the choice of solvent and their formation is energetically favourable for all considered solvents. However, energetic considerations such as these do not explain the experimental solvent-dependence of the dispersion concentration. Instead, we find that solvents with high diffusion coefficients parallel to the graphene layer result in the lowest experimental concentration of graphene in solution. This can be explained by the enhanced ease of reaggregation in these solvents. Solvents with smaller diffusion coefficients result in higher experimental graphene concentrations as reaggregation is prevented. In the low diffusion limit, however, this relationship breaks down. We suggest that here the concentration of graphene in solution depends primarily on the separation efficiency of the initial exfoliation step. Based on this, we predict that the concentration of exfoliated graphene in solvents such as benzaldehyde and quinoline, which have low diffusion constants, can be increased dramatically by careful tuning of the experimental sonication parameters. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Linear Jacobi-Legendre expansion of the charge density for machine learning-accelerated electronic structure calculations

Authors: Bruno Focassio, Michelangelo Domina, Urvesh Patil, Adalberto Fazzio, Stefano Sanvito

Abstract: Kohn-Sham density functional theory (KS-DFT) is a powerful method to obtain key materials' properties, but the iterative solution of the KS equations is a numerically intensive task, which limits its application to complex systems. To address this issue, machine learning (ML) models can be used as surrogates to find the ground-state charge density and reduce the computational overheads. We develop… ▽ More Kohn-Sham density functional theory (KS-DFT) is a powerful method to obtain key materials' properties, but the iterative solution of the KS equations is a numerically intensive task, which limits its application to complex systems. To address this issue, machine learning (ML) models can be used as surrogates to find the ground-state charge density and reduce the computational overheads. We develop a grid-centred structural representation, based on Jacobi and Legendre polynomials combined with a linear regression, to accurately learn the converged DFT charge density. This integrates into a ML pipeline that can return any density-dependent observable, including energy and forces, at the quality of a converged DFT calculation, but at a fraction of the computational cost. Fast scanning of energy landscapes and producing starting densities for the DFT self-consistent cycle are among the applications of our scheme. △ Less

Submitted 25 May, 2023; v1 submitted 31 January, 2023; originally announced January 2023.

Cluster expansion constructed over Jacobi-Legendre polynomials for accurate force fields

Authors: Michelangelo Domina, Urvesh Patil, Matteo Cobelli, Stefano Sanvito

Abstract: We introduce a compact cluster expansion method, constructed over Jacobi and Legendre polynomials, to generate highly accurate and flexible machine-learning force fields. The constituent many-body contributions are separated, interpretable and adaptable to replicate the physical knowledge of the system. In fact, the flexibility introduced by the use of the Jacobi polynomials allows us to impose, i… ▽ More We introduce a compact cluster expansion method, constructed over Jacobi and Legendre polynomials, to generate highly accurate and flexible machine-learning force fields. The constituent many-body contributions are separated, interpretable and adaptable to replicate the physical knowledge of the system. In fact, the flexibility introduced by the use of the Jacobi polynomials allows us to impose, in a natural way, constrains and symmetries to the cluster expansion. This has the effect of reducing the number of parameters needed for the fit and of enforcing desired behaviours of the potential. For instance, we show that our Jacobi-Legendre cluster expansion can be designed to generate potentials with a repulsive tail at short inter-atomic distances, without the need of imposing any external function. Our method is here continuously compared with available machine-learning potential schemes, such as the atomic cluster expansion and potentials built over the bispectrum. As an example we construct a Jacobi-Legendre potential for carbon, by training a slim and accurate model capable of describing crystalline graphite and diamond, as well as liquid and amorphous elemental carbon. △ Less

Submitted 27 June, 2023; v1 submitted 22 August, 2022; originally announced August 2022.

Comments: 16 Pages, 8 figures, 6 Page supplementary material

Understanding the Origin of the Low Cure-Shrinkage of Polybenzoxazine Resin by Computational Simulation

Authors: Prashik S. Gaikwad, Aaron S. Krieg, Prathamesh P. Deshpande, Sagar Umesh Patil, Julia A. King, Marianna Maiaru, Gregory M. Odegard

Abstract: Thermoset resin-based composite materials are widely used in the aerospace industry, mainly due to their high stiffness-to-weight and strength-to-weight ratios. A major issue with the use of thermoset resins in fiber composites is the process-induced residual stresses that are formed from resin chemical shrinkage during the curing process. These residual stresses within the composite material ulti… ▽ More Thermoset resin-based composite materials are widely used in the aerospace industry, mainly due to their high stiffness-to-weight and strength-to-weight ratios. A major issue with the use of thermoset resins in fiber composites is the process-induced residual stresses that are formed from resin chemical shrinkage during the curing process. These residual stresses within the composite material ultimately result in reduced durability and residual deformations of the final product. Polybenzoxazine (PBZ) polymer resins have demonstrated near-zero volumetric shrinkage during the curing process. Although the low shrinkage of PBZ is promising in terms of reduced process-induced residual stresses, little is known about the physical causes. In this work, Molecular Dynamics (MD) simulations are performed with a reactive force field to predict physical properties (gelation point, evolution of network, mass density, volumetric shrinkage) and mechanical properties (Bulk modulus, Shear modulus, Young's modulus, Poisson's ratio, Yield strength) as a function of crosslinking density. The MD modeling procedure is validated herein using experimental measurements of the modeled PBZ resin. The results of this study are used to provide a physical understanding of the zero-shrinkage phenomenon of PBZ. This information is also a critical input to future process modeling efforts for PBZ composites. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Molecular Dynamics Study to Predict Thermo-Mechanical Properties of DGEBF/DETDA Epoxy as a Function of Crosslinking Density

Authors: Sagar Umesh Patil, Sagar P. Shah, Michael N. Olaya, Prathamesh P. Deshpande, Marianna Maiaru, Gregory M. Odegard

Abstract: Epoxy resins are used extensively in composite materials for a wide range of engineering applications, including structural components of aircraft and spacecraft. The processing of fiber-reinforced epoxy composite structures requires carefully selected heating and cooling cycles to fully cure the resin and form strong crosslinked networks. To fully optimize the processing parameters for effective… ▽ More Epoxy resins are used extensively in composite materials for a wide range of engineering applications, including structural components of aircraft and spacecraft. The processing of fiber-reinforced epoxy composite structures requires carefully selected heating and cooling cycles to fully cure the resin and form strong crosslinked networks. To fully optimize the processing parameters for effective epoxy monomer crosslinking and final product integrity, the evolution of mechanical properties of epoxies during processing must be comprehensively understood. Because the full experimental characterization of these properties as a function of the degree of cure is difficult and time-consuming, efficient computational predictive tools are needed. The objective of this research is to develop an experimentally validated Molecular Dynamics (MD) modeling method, which incorporates a reactive force field, to accurately predict the thermo-mechanical properties of an epoxy resin as a function of the degree of cure. Experimental rheometric and mechanical testing are used to validate an MD model which is subsequently used to predict mass density, shrinkage, elastic properties, and yield strength as a function of the degree of cure. The results indicate that each of the physical and mechanical properties evolve uniquely during the crosslinking process. These results are important for future processing modeling efforts. △ Less

Submitted 2 August, 2021; originally announced August 2021.

Comments: 21 pages, 17 figures

Molecular Dynamics Modeling of Epoxy Resins using the Reactive Interface Force Field

Authors: G. M. Odegard, S. U. Patil, P. Deshpande, K. Kanhaiya, J. Winetrout, H. Heinz, S. Shah, M. Maiaru

Abstract: Predictive computational modeling of polymer materials is necessary for the efficient design of composite materials and the corresponding processing methods. Molecular dynamics (MD) modeling is especially important for establishing accurate processing-structure-property relationships for neat resins. For MD modeling of amorphous polymer materials, an accurate force field is fundamental to reliable… ▽ More Predictive computational modeling of polymer materials is necessary for the efficient design of composite materials and the corresponding processing methods. Molecular dynamics (MD) modeling is especially important for establishing accurate processing-structure-property relationships for neat resins. For MD modeling of amorphous polymer materials, an accurate force field is fundamental to reliable prediction of properties. Reactive force fields, in which chemical bonds can be formed or broken, offer further capability in predicting the mechanical behavior of amorphous polymers subjected to relatively large deformations. To this end, the Reactive Interface Force Field (IFF-R) has been recently developed to provide an efficient means to predict the behavior of materials under these conditions. Although IFF-R has been proven to be accurate for some crystalline organic and inorganic systems, it has not yet been proven to be accurate for amorphous polymer systems. The objective of this study is to use IFF-R to predict the thermo-mechanical properties of three different epoxy systems and validate with experimental measurements. The results indicate that IFF-R predicts thermo-mechanical properties that agree closely with experiment. Therefore, IFF-R can be used to reliably establish mechanical properties of polymers on the molecular level for future design of new composite materials and processing methods. △ Less

Submitted 21 November, 2021; v1 submitted 29 July, 2021; originally announced July 2021.

Journal ref: Macromolecules 2021, 54, 9815-9824

Design and Development of Autonomous Delivery Robot

Authors: Aniket Gujarathi, Akshay Kulkarni, Unmesh Patil, Yogesh Phalak, Rajeshree Deotalu, Aman Jain, Navid Panchi, Ashwin Dhabale, Shital Chiddarwar

Abstract: The field of autonomous robotics is growing at a rapid rate. The trend to use increasingly more sensors in vehicles is driven both by legislation and consumer demands for higher safety and reliable service. Nowadays, robots are found everywhere, ranging from homes, hospitals to industries, and military operations. Autonomous robots are developed to be robust enough to work beside humans and to car… ▽ More The field of autonomous robotics is growing at a rapid rate. The trend to use increasingly more sensors in vehicles is driven both by legislation and consumer demands for higher safety and reliable service. Nowadays, robots are found everywhere, ranging from homes, hospitals to industries, and military operations. Autonomous robots are developed to be robust enough to work beside humans and to carry out jobs efficiently. Humans have a natural sense of understanding of the physical forces acting around them like gravity, sense of motion, etc. which are not taught explicitly but are developed naturally. However, this is not the case with robots. To make the robot fully autonomous and competent to work with humans, the robot must be able to perceive the situation and devise a plan for smooth operation, considering all the adversities that may occur while carrying out the tasks. In this thesis, we present an autonomous mobile robot platform that delivers the package within the VNIT campus without any human intercommunication. From an initial user-supplied geographic target location, the system plans an optimized path and autonomously navigates through it. The entire pipeline of an autonomous robot working in outdoor environments is explained in detail in this thesis. △ Less

Submitted 16 March, 2021; originally announced March 2021.

Comments: 56 pages, Bachelor Thesis

Characterization of Minimum Time-Fuel Optimal Control for LTI Systems

Authors: Rajasree Sarkar, Deepak U. Patil, Indra Narayan Kar

Abstract: A problem of computing time-fuel optimal control for state transfer of a single input linear time invariant (LTI) system to the origin is considered. The input is assumed to be bounded. Since, the optimal control is bang-off-bang in nature, it is characterized by sequences of +1 , 0 and -1 and the corresponding switching time instants. All (candidate) sequences satisfying the Pontryagin's maximum… ▽ More A problem of computing time-fuel optimal control for state transfer of a single input linear time invariant (LTI) system to the origin is considered. The input is assumed to be bounded. Since, the optimal control is bang-off-bang in nature, it is characterized by sequences of +1 , 0 and -1 and the corresponding switching time instants. All (candidate) sequences satisfying the Pontryagin's maximum principle (PMP) necessary conditions are characterized. The number of candidate sequences is obtained as a function of the order of system and a method to list all candidate sequences is derived. Corresponding to each candidate sequence, switching time instants are computed by solving a static optimization problem. Since the candidate control input is a piece-wise constant function, the time-fuel cost functional is converted to a linear function in switching time instants. By using a simple substitution of variables, reachability constraints are converted to polynomial equations and inequalities. Such a static optimization problem can be solved separately for each candidate sequence. Finally, the optimal control input is obtained from candidate sequences which gives the least cost. For each sequence, optimization problem can be solved by converting it to a generalized moment problem (GMP) and then solving a hierachical sequence of semidefinite relaxations to approximate the minima and minimizer [1]. Lastly, a numerical example is presented for demonstration of method. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Composition Dependence of the Charge Driven Phase Transition in Group-VI Transition Metal Dichalcogenides

Authors: Urvesh Patil, Nuala M. Caffrey

Abstract: Materials exhibiting multiple stable phases can be used as functional components in electronic and optical applications if the phase transition is controllable. Group-VI transition metal dichalcogenides (TMDs, MX$_2$, where M=Mo, W and X = S, Se) are known to undergo charge induced transitions from semi-conducting H phases to metallic T phases. This occurs, for example, when bulk TMDs are exfoliat… ▽ More Materials exhibiting multiple stable phases can be used as functional components in electronic and optical applications if the phase transition is controllable. Group-VI transition metal dichalcogenides (TMDs, MX$_2$, where M=Mo, W and X = S, Se) are known to undergo charge induced transitions from semi-conducting H phases to metallic T phases. This occurs, for example, when bulk TMDs are exfoliated with the aid of alkali ion intercalants. However, it is difficult to experimentally decouple the effect of composition-dependent phase transition barriers from indirect effects related to the exfoliation process. Here, using first-principles calculations, we study the energetics of transition between the different structural polytypes of four group-VI TMDs upon lithium adsorption. We find that both the activation barrier from the H phase to the metallic phase in charged monolayers and the reverse barrier in neutral monolayers are required to explain experimental results. We show that the high proportion of metallic phase found in WS$_2$ monolayers after alkali treatment can be explained by high transition barriers to revert back to the H phase once in a neutral state. The calculated barriers however cannot explain the low proportion of metallic phase found in MoS$_2$ monolayers in some experiments and so non-electronic effects must also play a role. △ Less

Submitted 2 June, 2019; v1 submitted 9 January, 2019; originally announced January 2019.

Comments: 9 pages, 4 figures

Journal ref: Phys. Rev. B 100, 075424 (2019)

Adsorption of common solvent molecules on graphene and MoS$_2$ from first-principles

Authors: Urvesh Patil, Nuala M. Caffrey

Abstract: Solvents are an essential element in the production and processing of two-dimensional (2D) materials. For example, the liquid phase exfoliation of layered materials requires a solvent to prevent the resulting monolayers from re-aggregating, while solutions of functional atoms and molecules are routinely used to modify the properties of the layers. It is generally assumed that these solvents do not… ▽ More Solvents are an essential element in the production and processing of two-dimensional (2D) materials. For example, the liquid phase exfoliation of layered materials requires a solvent to prevent the resulting monolayers from re-aggregating, while solutions of functional atoms and molecules are routinely used to modify the properties of the layers. It is generally assumed that these solvents do not interact strongly with the layer and so their effects can be neglected. Yet experimental evidence has suggested that explicit atomic-scale interactions between the solvent and layered material may play a crucial role in exfoliation and cause unintended electronic changes in the layer. Little is known about the precise nature of the interaction between the solvent molecules and the 2D layer. Here, we use density functional theory calculations to determine the adsorption configuration and binding energy of a variety of common solvent molecules, both polar and non-polar, on two of the most popular 2D materials, namely graphene and MoS$_2$. We show that these molecules are physisorbed on the surface with negligible charge transferred between them. We find that the adsorption strength of the different molecules is independent of the polar nature of the solvent. However, we show the molecules induce a significant charge rearrangement at the interface after adsorption as a result of polar bonds in the molecule. △ Less

Submitted 20 June, 2018; originally announced June 2018.

Comments: 8 pages, 6 figures

Resonant enhancement in nanostructured thermoelectric performance via electronic thermal conductivity engineering

Authors: Urvesh Patil, Bhaskaran Muralidharan

Abstract: The use of an asymmetric broadening in the transport distribution, a characteristic of resonant structures, is proposed as a route to engineer a decrease in electronic thermal conductivity thereby enhancing the electronic figure of merit in nanostructured thermoelectrics. Using toy models, we first demonstrate that a decrease in thermal conductivity resulting from such an asymmetric broadening may… ▽ More The use of an asymmetric broadening in the transport distribution, a characteristic of resonant structures, is proposed as a route to engineer a decrease in electronic thermal conductivity thereby enhancing the electronic figure of merit in nanostructured thermoelectrics. Using toy models, we first demonstrate that a decrease in thermal conductivity resulting from such an asymmetric broadening may indeed lead to an electronic figure of merit well in excess of 1000 in an idealized situation and in excess of 10 in a realistic situation. We then substantiate with realistic resonant structures designed using graphene nano-ribbons by employing a tight binding framework with edge correction that match density functional theory calculations under the local density approximation. The calculated figure of merit exceeding 10 in such realistic structures further reinforces the concept and sets a promising direction to use nano-ribbon structures to engineer a favorable decrease in the electronic thermal conductivity. △ Less

Submitted 15 August, 2016; originally announced August 2016.

Comments: 7 pages, 6 figures in Physica E (2016)

Recurrences in Driven Quantum Systems

Authors: V. Poduri, D. A. Browne, U. Patil

Abstract: We consider an initially bound quantum particle subject to an external time-dependent field. When the external field is large, the particle shows a tendency to repeatedly return to its initial state, irrespective of whether the frequency of the field is sufficient for escape from the well. These recurrences, which are absent in a classical calculation, arise from the system evolving primarily li… ▽ More We consider an initially bound quantum particle subject to an external time-dependent field. When the external field is large, the particle shows a tendency to repeatedly return to its initial state, irrespective of whether the frequency of the field is sufficient for escape from the well. These recurrences, which are absent in a classical calculation, arise from the system evolving primarily like a free particle in the external field. △ Less

Submitted 6 September, 1994; originally announced September 1994.

Comments: 10 pages in RevTeX format, with three PS files appended