Showing 1–10 of 10 results for author: Paterova, A V

Nonlinear interferometry-based metrology of magneto-optical properties at infrared wavelengths

Authors: Tanmoy Chakraborty, Thomas Produit, Harish N S Krishnamoorthy, Cesare Soci, Anna V. Paterova

Abstract: Magneto-optical properties of materials are utilized in numerous applications both in scientific research and industries. The novel properties of these materials can be further investigated by performing metrology in the infrared wavelength range, thereby enriching their potential applications. However, current infrared metrology techniques can be challenging and resource-intensive due to the unav… ▽ More Magneto-optical properties of materials are utilized in numerous applications both in scientific research and industries. The novel properties of these materials can be further investigated by performing metrology in the infrared wavelength range, thereby enriching their potential applications. However, current infrared metrology techniques can be challenging and resource-intensive due to the unavailability of suitable components. To address these challenges, we propose and demonstrate a set of measurements based on nonlinear interferometry, which allows us investigating magneto-optical properties of materials at infrared wavelength range by performing optical detection at the visible range. For a proof-of-principle study, we measure the Verdet constant of a bismuth-iron-garnet, over a spectral bandwidth of 600 nm in the near-IR range. △ Less

Submitted 28 June, 2024; originally announced June 2024.

Comments: 10 pages, 12 fugures

Journal ref: Optica Quantum 3, 119-128 (2025)

Broadband quantum spectroscopy at the fingerprint mid-infrared region

Authors: Anna V. Paterova, Zi S. D. Toa, Hongzhi Yang, Leonid A. Krivitsky

Abstract: Numerous molecules exhibit unique absorption bands in the fingerprint infrared (IR) region, allowing chemical identification and detection. This makes IR spectroscopy an essential tool in biomedical diagnostics, sensing, and material characterization. However, measurements in the IR range are challenging due to the relatively poor performance, need for cryogenic cooling, and high cost of IR light… ▽ More Numerous molecules exhibit unique absorption bands in the fingerprint infrared (IR) region, allowing chemical identification and detection. This makes IR spectroscopy an essential tool in biomedical diagnostics, sensing, and material characterization. However, measurements in the IR range are challenging due to the relatively poor performance, need for cryogenic cooling, and high cost of IR light sources and photodetectors. Here, we demonstrate that the mid-IR fingerprints of the sample can be revealed from measurements in the near-IR range using conventional silicon photodetectors. Our approach relies on the quantum interference of correlated photon pairs produced in strongly frequency non-degenerate parametric down-conversion. Our technique simultaneously measures the absorption coefficient and refractive index in the broad fingerprint region with high accuracy. As a proof-of-concept, we perform spectroscopy of nitrous oxide gas in the 7.4-8.4 μm wavelength range, with the detection in the 865-877 nm range. This work extends the applicability of quantum interferometry to a range of broad practical appeals, such as detection of atmosphere pollutants, breath diagnostics, chemical safety, and others. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Broadband diffraction of correlated photons from crystal superlattices

Authors: Zi S. D. Toa, Anna V. Paterova, Leonid A. Krivitsky

Abstract: Sources of broadband quantum correlated photons present a valuable resource for quantum metrology, sensing, and communication. Here, we report the generation of spectrally broadband correlated photons from frequency nondegenerate spontaneous parametric down-conversion in a custom-designed lithium niobate superlattice. The superlattice induces a nonlinear interference, resulting in an experimentall… ▽ More Sources of broadband quantum correlated photons present a valuable resource for quantum metrology, sensing, and communication. Here, we report the generation of spectrally broadband correlated photons from frequency nondegenerate spontaneous parametric down-conversion in a custom-designed lithium niobate superlattice. The superlattice induces a nonlinear interference, resulting in an experimentally observed comb-like emission spanning 0.060 um and 1.4 um of spectral bandwidth at 0.647 um and 3.0 um wavelengths, respectively. In addition to useful technological applications, our concept offers an interesting analogy between optical diffraction in quantum and classical optics. △ Less

Submitted 13 October, 2021; v1 submitted 1 September, 2021; originally announced September 2021.

Comments: updated paper and supplementary material

Nonlinear interferometry with infrared metasurfaces

Authors: Anna V. Paterova, Dmitry A. Kalashnikov, Egor Khaidarov, Hongzhi Yang, Tobias W. W. Mass, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov, Leonid A. Krivitsky

Abstract: The optical elements comprised of sub-diffractive light scatterers, or metasurfaces, hold a promise to reduce the footprint and unfold new functionalities of optical devices. A particular interest is focused on metasurfaces for manipulation of phase and amplitude of light beams. Characterisation of metasurfaces can be performed using interferometry, which, however, may be cumbersome, specifically… ▽ More The optical elements comprised of sub-diffractive light scatterers, or metasurfaces, hold a promise to reduce the footprint and unfold new functionalities of optical devices. A particular interest is focused on metasurfaces for manipulation of phase and amplitude of light beams. Characterisation of metasurfaces can be performed using interferometry, which, however, may be cumbersome, specifically in the infrared (IR) range. Here, we realise a new method for characterising IR metasurfaces based on nonlinear interference, which uses accessible components for visible light. Correlated IR and visible photons are launched into a nonlinear interferometer so that the phase profile, imposed by the metasurface on the IR photons, modifies the interference at the visible photon wavelength. Furthermore, we show that this concept can be used for broadband manipulation of the intensity profile of a visible beam using a single IR metasurface. Our method unfolds the potential of quantum interferometry for the characterization of advanced optical elements. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Comments: Submitted for publication

Quantum Imaging for Semiconductor Industry

Authors: Anna V. Paterova, Hongzhi Yang, Zi S. D. Toa, Leonid A. Krivitsky

Abstract: Infrared (IR) imaging is one of the significant tools for the quality control measurements of fabricated samples. Standard IR imaging techniques use direct measurements, where light sources and detectors operate at IR range. Due to the limited choices of IR light sources or detectors, challenges in reaching specific IR wavelengths may arise. In our work, we perform indirect IR microscopy based on… ▽ More Infrared (IR) imaging is one of the significant tools for the quality control measurements of fabricated samples. Standard IR imaging techniques use direct measurements, where light sources and detectors operate at IR range. Due to the limited choices of IR light sources or detectors, challenges in reaching specific IR wavelengths may arise. In our work, we perform indirect IR microscopy based on the quantum imaging technique. This method allows us to probe the sample with IR light, while the detection is shifted into the visible or near-IR range. Thus, we demonstrate IR quantum imaging of the silicon chips at different magnifications, wherein a sample is probed at 1550 nm wavelength, but the detection is performed at 810 nm. We also analyze the possible measurement conditions of the technique and estimate the time needed to perform quality control checks of samples. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Comments: Submitted for publication

Journal ref: Appl. Phys. Lett. 117, 054004 (2020) - Editor's Pick

Hyperspectral Infrared Microscopy With Visible Light

Authors: Anna V. Paterova, Sivakumar M. Maniam, Hongzhi Yang, Gianluca Grenci, Leonid A. Krivitsky

Abstract: Hyperspectral microscopy is an imaging technique that provides spectroscopic information with high spatial resolution. When applied in the relevant wavelength region, such as in the infrared (IR), it can reveal a rich spectral fingerprint across different regions of a sample. Challenges associated with low efficiency and high cost of IR light sources and detector arrays have limited its broad adop… ▽ More Hyperspectral microscopy is an imaging technique that provides spectroscopic information with high spatial resolution. When applied in the relevant wavelength region, such as in the infrared (IR), it can reveal a rich spectral fingerprint across different regions of a sample. Challenges associated with low efficiency and high cost of IR light sources and detector arrays have limited its broad adoption. We introduce a new approach to IR hyperspectral microscopy, where the IR spectral map of the sample is obtained with off-the-shelf components built for visible light. The technique is based on the nonlinear interference of correlated photons generated via parametric down-conversion. We demonstrate chemical mapping of a patterned sample, in which different areas have distinctive IR spectroscopic fingerprints. The technique provides a wide field of view, fast readout, and negligible heat delivered to the sample, which makes it highly relevant to material and biological applications. △ Less

Submitted 14 February, 2020; originally announced February 2020.

Comments: Submitted for publication

Journal ref: Science Advances, Volume 6, Issue 44, Pages eabd0460 (2020)

Nonlinear Interference in Crystal Superlattices

Authors: Anna V. Paterova, Leonid A. Krivitsky

Abstract: Nonlinear interferometers with correlated photons hold a promise to advance optical characterization and metrology techniques by improving their performance and affordability. Nonlinear interferometers offer the sub-shot noise phase sensitivity and enable measurements in detection-challenging regions using inexpensive and efficient components. The sensitivity of such interferometers, defined by th… ▽ More Nonlinear interferometers with correlated photons hold a promise to advance optical characterization and metrology techniques by improving their performance and affordability. Nonlinear interferometers offer the sub-shot noise phase sensitivity and enable measurements in detection-challenging regions using inexpensive and efficient components. The sensitivity of such interferometers, defined by the ability to measure small shifts of interference fringes, can be significantly enhanced by using multiple nonlinear elements, or crystal superlattices. However, to date, the experiments with no more than two nonlinear elements have been realized, thus hindering the potential of nonlinear interferometers. Here, we build a nonlinear interferometer with up to five nonlinear elements in a highly-stable and versatile configuration. We study the modification of the interference pattern in different configurations of the superlattice and perform a proof-of-concept gas sensing experiment with enhanced sensitivity. Our approach offers a viable path towards broader adoption of nonlinear interferometers with correlated photons for imaging, interferometry, and spectroscopy. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Journal ref: Light: Science & Applications, volume 9, Article number: 82 (2020)

Tunable Optical Coherence Tomography in the Infrared Range Using Visible Photons

Authors: Anna V. Paterova, Hongzhi Yang, Chengwu An, Dmitry A. Kalashnikov, Leonid A. Krivitsky

Abstract: We report a proof-of-concept demonstration of a tunable infrared (IR) optical coherence tomography (OCT) technique with detection of only visible range photons. Our method is based on the nonclassical interference of frequency correlated photon pairs. The nonlinear crystal, introduced in the Michelson-type interferometer, generates photon pairs with one photon in the visible and another in the IR… ▽ More We report a proof-of-concept demonstration of a tunable infrared (IR) optical coherence tomography (OCT) technique with detection of only visible range photons. Our method is based on the nonclassical interference of frequency correlated photon pairs. The nonlinear crystal, introduced in the Michelson-type interferometer, generates photon pairs with one photon in the visible and another in the IR range. The intensity of detected visible photons depends on the phase and loss of IR photons, which interact with the sample under study. This enables us to perform imaging and characterize sample properties in the IR range by detecting visible photons. The technique possesses broad tunability and yields a fair axial and lateral resolution. The work contributes to the development of versatile 3D imaging and material characterization systems working in a broad range of IR wavelengths, which do not require the use of IR-range equipment. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Journal ref: Quantum Science and Technology 3, 025008 (2018)

Infrared Spectroscopy with Visible Light

Authors: Dmitry A. Kalashnikov, Anna V. Paterova, Sergei P. Kulik, Leonid A. Krivitsky

Abstract: Spectral measurements in the infrared (IR) optical range provide unique fingerprints of materials which are useful for material analysis, environmental sensing, and health diagnostics. Current IR spectroscopy techniques require the use of optical equipment suited for operation in the IR range, which faces challenges of inferior performance and high cost. Here we develop a spectroscopy technique, w… ▽ More Spectral measurements in the infrared (IR) optical range provide unique fingerprints of materials which are useful for material analysis, environmental sensing, and health diagnostics. Current IR spectroscopy techniques require the use of optical equipment suited for operation in the IR range, which faces challenges of inferior performance and high cost. Here we develop a spectroscopy technique, which allows spectral measurements in the IR range using visible spectral range components. The technique is based on nonlinear interference of infrared and visible photons, produced via Spontaneous Parametric Down Conversion (SPDC). The intensity interference pattern for a visible photon depends on the phase of an IR photon, which travels through the media. This allows determining properties of the media in the IR range from the measurements of visible photons. The technique can substitute and/or complement conventional IR spectroscopy techniques, as it uses well-developed optical components for the visible range. △ Less

Submitted 23 June, 2015; originally announced June 2015.

Comments: submitted for publication

Journal ref: Nature Photonics 10, 98-101 (2016)

Broadband biphotons in a single spatial mode

Authors: K. G. Katamadze, N. A. Borshchevskaya, I. V. Dyakonov, A. V. Paterova, S. P. Kulik

Abstract: We demonastrate experimental technique for generating spatially single-mode broadband biphoton field. The method is based on dispersive optical element which precisely tailors the structure of type-I SPDC frequency angular spectrum in order to shift different spectral components to a single angular mode. Spatial mode filtering is realized by coupling biphotons into a single-mode optical fiber. We demonastrate experimental technique for generating spatially single-mode broadband biphoton field. The method is based on dispersive optical element which precisely tailors the structure of type-I SPDC frequency angular spectrum in order to shift different spectral components to a single angular mode. Spatial mode filtering is realized by coupling biphotons into a single-mode optical fiber. △ Less

Submitted 28 July, 2015; v1 submitted 29 April, 2015; originally announced April 2015.

Journal ref: Phys. Rev. A 92, 023812 (2015)