Skip to main content

Showing 1–11 of 11 results for author: Parise, M

.
  1. arXiv:2411.17096  [pdf

    physics.acc-ph

    Cold Test Results of Pre-Production PIP-II SSR2 Cavities with High-Power Couplers in the Fermilab Spoke Test Cryostat

    Authors: A. Sukhanov, C. Contreras-Martinez, C. Grimm, B. Hanna, B. Hansen, T. Khabiboulline, M. Parise, D. Passarelli, Y. Pischalnikov, D. Porwisiak, V. Roger, J. Subedi, A. Syed, P. Varghese, S. Wijethunga, V. Yakovlev

    Abstract: As part of the PIP-II project at Fermilab, a pre-production cryomodule featuring 325 MHz Single Spoke Resonator type 2 (SSR2) superconducting RF cavities is under construction. These SSR2 cavities are fabricated by industry partners and undergo initial cold testing at our collaborating institution, IJCLab in France, utilizing low-power coupler. Subsequently, the cavities are subjected to final qua… ▽ More

    Submitted 25 November, 2024; originally announced November 2024.

    Comments: 32nd Linear Accelerator Conference (LINAC 2024)

    Report number: FERMILAB-CONF-24-0250-TD

  2. Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom

    Authors: Jacopo Bernardini, Mattia Parise, Donato Passarelli

    Abstract: Beamline components, such as superconducting radio frequency cavities and focusing lenses, need to be assembled together in a string while in a cleanroom environment. The present contribution identifies and characterizes materials for additive manufacturing that can be used in a cleanroom. The well known advantages of additive manufacturing processes would highly benefit the design and development… ▽ More

    Submitted 18 June, 2024; originally announced June 2024.

    Comments: 21st International Conference on Radio-Frequency Superconductivity (SRF 2023)

    Report number: FERMILAB-CONF-23-312-TD

  3. arXiv:2401.15011  [pdf

    physics.acc-ph

    Impact of Solenoid Induced Residual Magnetic Fields on The Prototype SSR1 CM Performance

    Authors: D. Passarelli, J. Bernardini, C. Boffo, S. Chandrasekaran, A. Hogberg, T. Khabiboulline, J. Ozelis, M. Parise, V. Roger, G. Romanov, A. Sukhanov, G. Wu, V. Yakovlev, Y. Xie

    Abstract: A prototype cryomodule containing eight Single Spoke Resonators type-1 (SSR1) operating at 325 MHz and four superconducting focusing lenses was successfully assembled, cold tested, and accelerated beam in the framework of the PIP-II project at Fermilab. The impact of induced residual magnetic fields from the solenoids on performance of cavities is presented in this contribution. In addition, desig… ▽ More

    Submitted 26 January, 2024; originally announced January 2024.

    Comments: SRF2023 Conference

    Report number: FERMILAB-CONF-23-338-TD

  4. arXiv:2311.05475  [pdf

    physics.acc-ph

    Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab

    Authors: J. Bernardini, V. Roger, D. Passarelli, M. Parise, G. Romanov, J. Helsper, M. Chen, M. Kramp, F. Lewis, B. Squires, T. Nicol, P. Neri

    Abstract: This contribution reports the design of the production Single Spoke Resonator Type 1 Cryomodule (SSR1 CM) for the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. The Fermilab style cryomodule developed f… ▽ More

    Submitted 15 November, 2023; v1 submitted 9 November, 2023; originally announced November 2023.

    Comments: 21st Intl Conf Radio Frequency Superconductivity (SRF 2023). arXiv admin note: substantial text overlap with arXiv:2209.01282

    Report number: FERMILAB-CONF-23-311-PIP2-TD

  5. arXiv:2307.08852  [pdf

    physics.acc-ph

    PIP-II SSR2 Cavities Fabrication and Processing Experience

    Authors: M. Parise, D. Passarelli, P. Berrutti, D. Longuevergne, P. Duchesne

    Abstract: The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several units are already manufactured and prepared for cold testing. In this work, data collected from the fabrication, processing and preparation of the cavities will be presented and the improvements implemented after the comp… ▽ More

    Submitted 17 July, 2023; originally announced July 2023.

    Report number: FERMILAB-CONF-23-335-TD

  6. arXiv:2209.05975  [pdf, other

    physics.acc-ph

    Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab

    Authors: PIP-II Collaboration, :, M. Parise, D. Passarelli, J. Bernardini

    Abstract: The beam volume of the Pre-Production Single Spoke Resonator type 2 (ppSSR2) cryomodule [1] for the Proton Improvement Plan-II (PIP-II) [2] project will be protected against over-pressurization using a burst disk. This contribution focuses on the analysis of the relief of such trapped volume during a catastrophic scenario with multiple systems failures. An analytical model, able to predict the pre… ▽ More

    Submitted 13 September, 2022; originally announced September 2022.

    Comments: 31st Linear Accelerator Conference (LINAC22)

    Report number: FERMILAB-CONF-22-637-TD

  7. arXiv:2209.02503  [pdf

    physics.acc-ph physics.app-ph

    Niobium to Titanium Electron Beam Welding for SRF Cavities

    Authors: M. Parise, D. Passarelli, J. Bernardini

    Abstract: Titanium and niobium are the main materials used for the fabrication of Superconducting Radio Frequency (SRF) cavities. These two metals are usually joined , using various welding techniques, using a third material in between. This contribution focuses on the development of an innovative electron beam welding technique capable of producing a strong bond between these two different materials. Sever… ▽ More

    Submitted 6 September, 2022; originally announced September 2022.

    Report number: FERMILAB-CONF-22-638-TD

  8. arXiv:2209.02496  [pdf

    physics.acc-ph

    Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab

    Authors: M. Parise, D. Passarelli, P. Berrutti, V. Roger, D. Longuevergne, P. Duchesne

    Abstract: The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured and five installed in the first pre-production cryomodule. The mechanical design of the jacketed cavity has been finalized and it will be presented in this paper along with fabrication and processing experience. The import… ▽ More

    Submitted 6 September, 2022; originally announced September 2022.

    Report number: FERMILAB-CONF-22-636-TD

  9. arXiv:2209.01282  [pdf

    physics.acc-ph

    Final Design Of The Pre-production SSR2 Cryomodule For PIP-II Project At Fermilab

    Authors: J. Bernardini, D. Passarelli, V. Roger, M. Parise, J. Helsper, G. V. Romanov, M. Chen, C. Boffo, M. Kramp, F. L. Lewis, T. Nicol, B. Squires, M. Turenne

    Abstract: The present contribution reports the design of the pre-production Single Spoke Resonator Type 2 Cryomodule (ppSSR2 CM), developed in the framework of the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. T… ▽ More

    Submitted 2 September, 2022; originally announced September 2022.

    Report number: FERMILAB-CONF-22-640-TD

  10. arXiv:2209.01280  [pdf

    physics.acc-ph

    Application Of The ASME Boiler And Pressure Vessel Code In The Design Of SSR Cryomodule Beamlines For PIP-II Project At Fermilab

    Authors: J. Bernardini, M. Parise, M. Chen, D. Passarelli

    Abstract: This contribution reports the design of the main components used to interconnect SRF cavities and superconducting focusing lenses in the SSR Cryomodule beamlines, developed in the framework of the PIP-II project at Fermilab. The focus of the present contribution is on the design and testing of the edge-welded bellows according to ASME Boiler and Pressure Vessel Code. The activities performed to qu… ▽ More

    Submitted 2 September, 2022; originally announced September 2022.

    Report number: FERMILAB-CONF-22-639-TD

  11. arXiv:1401.4948  [pdf, other

    astro-ph.IM

    The LAUE project and its main results

    Authors: E. Virgilli, F. Frontera, V. Valsan, V. Liccardo, V. Carassiti, S. Squerzanti, M. Statera, M. Parise, S. Chiozzi, F. Evangelisti, E. Caroli, J. Stephen, N. Auricchio, S. Silvestri, A. Basili, F. Cassese, L. Recanatesi, V. Guidi, V. Bellucci, R. Camattari, C. Ferrari, A. Zappettini, E. Buffagni, E. Bonnini, M. Pecora , et al. (2 additional authors not shown)

    Abstract: We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made… ▽ More

    Submitted 20 January, 2014; originally announced January 2014.

    Comments: 17 pages, SPIE conference 2013 - San Diego, USA