-
Identity and Access Management for the Computing Continuum
Authors:
Chalima Dimitra Nassar Kyriakidou,
Athanasia Maria Papathanasiou,
Vasilios A. Siris,
Nikos Fotiou,
George C. Polyzos,
Eduardo Cánovas Martínez,
Antonio Skarmeta
Abstract:
The computing continuum introduces new challenges for access control due to its dynamic, distributed, and heterogeneous nature. In this paper, we propose a Zero-Trust (ZT) access control solution that leverages decentralized identification and authentication mechanisms based on Decentralized Identifiers (DIDs) and Verifiable Credentials (VCs). Additionally, we employ Relationship-Based Access Cont…
▽ More
The computing continuum introduces new challenges for access control due to its dynamic, distributed, and heterogeneous nature. In this paper, we propose a Zero-Trust (ZT) access control solution that leverages decentralized identification and authentication mechanisms based on Decentralized Identifiers (DIDs) and Verifiable Credentials (VCs). Additionally, we employ Relationship-Based Access Control (ReBAC) to define policies that capture the evolving trust relationships inherent in the continuum. Through a proof-of-concept implementation, we demonstrate the feasibility and efficiency of our solution, highlighting its potential to enhance security and trust in decentralized environments.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
Optimization of Patterned Surfaces for Improved Superhydrophobicity Through Cost-Effective Large-Scale Computations
Authors:
V. Krokos,
G. Pashos,
A. N. Spyropoulos,
G. Kokkoris,
A. G. Papathanasiou,
A. G. Boudouvis
Abstract:
The growing need for creating surfaces with specific wetting properties, such as superhyrdophobic behavior, asks for novel methods for their efficient design. In this work, a fast computational method for the evaluation of patterned superhyrdophobic surfaces is introduced. The hydrophobicity of a surface is quantified in energy terms through an objective function. The increased computational cost…
▽ More
The growing need for creating surfaces with specific wetting properties, such as superhyrdophobic behavior, asks for novel methods for their efficient design. In this work, a fast computational method for the evaluation of patterned superhyrdophobic surfaces is introduced. The hydrophobicity of a surface is quantified in energy terms through an objective function. The increased computational cost led to the parallelization of the method with the Message Passing Interface (MPI) communication protocol that enables calculations on distributed memory systems allowing for parametric investigations at acceptable time frames. The method is demonstrated for a surface consisting of an array of pillars with inverted conical (frustum) geometry. The parallel speedup achieved allows for low cost parametric investigations on the effect of the fine features (curvature and slopes) of the pillars on the superhydophobicity of the surface and consequently for the optimization of superhyrdophobic surfaces.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
Effect of substrate topography, material wettability and dielectric thickness on reversible electrowetting
Authors:
Nikolaos T. Chamakos,
George Karapetsas,
Athanasios G. Papathanasiou
Abstract:
Recent experiments by Kavousanakis et al., Langmuir, 2018 [1], showed that reversible electrowetting on superhydrophobic surfaces can be achieved by using a thick solid dielectric layer (e.g. tens of micrometers). It has also been shown, through equilibrium (static) computations, that when the dielectric layer is thick enough the electrostatic pressure is smoothly distributed along the droplet sur…
▽ More
Recent experiments by Kavousanakis et al., Langmuir, 2018 [1], showed that reversible electrowetting on superhydrophobic surfaces can be achieved by using a thick solid dielectric layer (e.g. tens of micrometers). It has also been shown, through equilibrium (static) computations, that when the dielectric layer is thick enough the electrostatic pressure is smoothly distributed along the droplet surface, thus the irreversible Cassie to Wenzel wetting transitions can be prevented. In the present work we perform more realistic, dynamic simulations of the electrostatically-induced spreading on superhydrophobic surfaces. To this end, we employ an efficient numerical scheme which enables us to fully take into account the topography of the solid substrate. We investigate in detail the role of the various characteristics of the substrate (i.e. the dielectric thickness, geometry and material wettability) and present relevant flow maps for the resulting wetting states. Through our dynamic simulations, we identify the conditions under which it is possible to achieve reversible electrowetting. We have found that not only the collapse (Cassie-Baxter to Wenzel) transitions but also the contact angle hysteresis of the substrate significantly affects the reversibility.
△ Less
Submitted 27 July, 2018;
originally announced July 2018.
-
3D Shape Classification Using Collaborative Representation based Projections
Authors:
F. Fotopoulou,
S. Oikonomou,
A. Papathanasiou,
G. Economou,
S. Fotopoulos
Abstract:
A novel 3D shape classification scheme, based on collaborative representation learning, is investigated in this work. A data-driven feature-extraction procedure, taking the form of a simple projection operator, is in the core of our methodology. Provided a shape database, a graph encapsulating the structural relationships among all the available shapes, is first constructed and then employed in de…
▽ More
A novel 3D shape classification scheme, based on collaborative representation learning, is investigated in this work. A data-driven feature-extraction procedure, taking the form of a simple projection operator, is in the core of our methodology. Provided a shape database, a graph encapsulating the structural relationships among all the available shapes, is first constructed and then employed in defining low-dimensional sparse projections. The recently introduced method of CRPs (collaborative representation based projections), which is based on L2-Graph, is the first variant that is included towards this end. A second algorithm, that particularizes the CRPs to shape descriptors that are inherently nonnegative, is also introduced as potential alternative. In both cases, the weights in the graph reflecting the database structure are calculated so as to approximate each shape as a sparse linear combination of the remaining dataset objects. By way of solving a generalized eigenanalysis problem, a linear matrix operator is designed that will act as the feature extractor. Two popular, inherently high dimensional descriptors, namely ShapeDNA and Global Point Signature (GPS), are employed in our experimentations with SHREC10, SHREC11 and SCHREC 15 datasets, where shape recognition is cast as a multi-class classification problem that is tackled by means of an SVM (support vector machine) acting within the reduced dimensional space of the crafted projections. The results are very promising and outperform state of the art methods, providing evidence about the highly discriminative nature of the introduced 3D shape representations.
△ Less
Submitted 18 November, 2017; v1 submitted 13 November, 2017;
originally announced November 2017.
-
Droplet spreading on rough surfaces: tackling the contact line boundary condition
Authors:
Nikolaos T. Chamakos,
Michail E. Kavousanakis,
Andreas G. Boudouvis,
Athanasios G. Papathanasiou
Abstract:
The complicated dynamics of the contact line of a moving droplet on a solid substrate often hamper the efficient modeling of microfluidic systems. In particular, the selection of the effective boundary conditions, specifying the contact line motion, is a controversial issue since the microscopic physics that gives rise to this displacement is still unknown. Here, a sharp interface, continuum-level…
▽ More
The complicated dynamics of the contact line of a moving droplet on a solid substrate often hamper the efficient modeling of microfluidic systems. In particular, the selection of the effective boundary conditions, specifying the contact line motion, is a controversial issue since the microscopic physics that gives rise to this displacement is still unknown. Here, a sharp interface, continuum-level, novel modeling approach, accounting for liquid/solid micro-scale interactions assembled in a disjoining pressure term, is presented. By following a unified conception (the model applies both to the liquid/solid and the liquid/ambient interfaces), the friction forces at the contact line, as well as the dynamic contact angle are derived implicitly as a result of the disjoining pressure and viscous effects interplay in the vicinity of the substrate's intrinsic roughness. Previous hydrodynamic model limitations, of imposing the contact line boundary condition to an unknown number and reconfigurable contact lines, when modeling the spreading dynamics on textured substrates, are now overcome. The validity of our approach is tested against experimental data of a droplet impacting on a horizontal solid surface. The study of the early spreading stage on hierarchically structured and chemically patterned solid substrates reveal an inertial regime where the contact radius grows according to a universal power law, perfectly agreeing with recently published experimental findings.
△ Less
Submitted 25 January, 2016;
originally announced January 2016.
-
Modeling of multiple three phase contact lines of liquid droplets on geometrically patterned surfaces: continuum and mesoscopic analysis
Authors:
Nikolaos T. Chamakos,
Michail E. Kavousanakis,
Athanasios G. Papathanasiou
Abstract:
By solving the Young Laplace equation of capillary hydrostatics one can accurately determine equilibrium shapes of droplets on relatively smooth solid surfaces. The solution, however of the Young Laplace equation becomes tricky when a droplet is sitting on a geometrically patterned surface and multiple, and unknown a priori, three phase contact lines have not been accounted for, since air pockets…
▽ More
By solving the Young Laplace equation of capillary hydrostatics one can accurately determine equilibrium shapes of droplets on relatively smooth solid surfaces. The solution, however of the Young Laplace equation becomes tricky when a droplet is sitting on a geometrically patterned surface and multiple, and unknown a priori, three phase contact lines have not been accounted for, since air pockets are trapped beneath the liquid droplet. In this work, we propose an augmented Young-Laplace equation, in which a unified formulation for the liquid/vapor and liquid/solid interfaces is adopted, incorporating microscale interactions. This way, we bypass the implementation of the Young's contact angle boundary condition at each three phase contact line. We demonstrate the method's efficiency by computing equilibrium wetting states of entire droplets sitting on geometrically structured surfaces, and compare the results with those of the mesoscopic Lattice Boltzmann simulations. The application of well-established parameter continuation techniques enables the tracing of stable and unstable equilibrium solutions if necessary for the determination of energy barriers separating co-existing stable wettign states. Since energy barriers determine whether a surface facilitates or inhibits certain wetting transitions, their computation is important for many technical applications. Our continuum-level analysis can readily be applied to patterned surfaces with increased and unstructured geometric complexity, having a significant computational advantage, as compared to the computationally demanding mesoscopic simulations that are usually employed for the same task.
△ Less
Submitted 4 June, 2013;
originally announced June 2013.
-
Engineering the geometry of stripe-patterned surfaces towards efficient wettability switching
Authors:
Michail E. Kavousanakis,
Carlos E. Colosqui,
Athanasios G. Papathanasiou
Abstract:
The ability to control wettability is important for a wide range of technological applications in which precise microfluidic handling is required. It is known that predesigned roughness at a micro- or nano- scale enhances the wetting properties of solid materials giving rise to super-hydrophobic or super-hydrophilic behavior. In this work, we study the dependence of the apparent wettability of a s…
▽ More
The ability to control wettability is important for a wide range of technological applications in which precise microfluidic handling is required. It is known that predesigned roughness at a micro- or nano- scale enhances the wetting properties of solid materials giving rise to super-hydrophobic or super-hydrophilic behavior. In this work, we study the dependence of the apparent wettability of a stripe-patterned solid surface on the stripe geometry, utilizing systems level analysis and mesoscopic Lattice-Boltzmann (LB) simulations. Through the computation of both stable and unstable states we are able to determine the energy barriers separating distinct metastable wetting states that correspond to the well-known Cassie and Wenzel states. This way the energy cost for inducing certain wetting transitions is computed and its dependence on geometric features of the surface pattern is explored.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
A mesoscopic model for microscale hydrodynamics and interfacial phenomena: Slip, films, and contact angle hysteresis
Authors:
Carlos E. Colosqui,
Michail E. Kavousanakis,
Athanasios G. Papathanasiou,
Ioannis G. Kevrekidis
Abstract:
We present a model based on the lattice Boltzmann equation that is suitable for the simulation of dynamic wetting. The model is capable of exhibiting fundamental interfacial phenomena such as weak adsorption of fluid on the solid substrate and the presence of a thin surface film within which a disjoining pressure acts. Dynamics in this surface film, tightly coupled with hydrodynamics in the fluid…
▽ More
We present a model based on the lattice Boltzmann equation that is suitable for the simulation of dynamic wetting. The model is capable of exhibiting fundamental interfacial phenomena such as weak adsorption of fluid on the solid substrate and the presence of a thin surface film within which a disjoining pressure acts. Dynamics in this surface film, tightly coupled with hydrodynamics in the fluid bulk, determine macroscopic properties of primary interest: the hydrodynamic slip; the equilibrium contact angle; and the static and dynamic hysteresis of the contact angles. The pseudo- potentials employed for fluid-solid interactions are composed of a repulsive core and an attractive tail that can be independently adjusted. This enables effective modification of the functional form of the disjoining pressure so that one can vary the static and dynamic hysteresis on surfaces that exhibit the same equilibrium contact angle. The modeled solid-fluid interface is diffuse, represented by a wall probability function which ultimately controls the momentum exchange between solid and fluid phases. This approach allows us to effectively vary the slip length for a given wettability (i.e. the static contact angle) of the solid substrate.
△ Less
Submitted 28 February, 2012;
originally announced February 2012.
-
Evaluating the robustness of top coatings comprising plasma-deposited fluorocarbons in electrowetting systems
Authors:
Dimitrios P. Papageorgiou,
Elias P. Koumoulos,
Costas A. Charitidis,
Andreas G. Boudouvis,
Athanasios G. Papathanasiou
Abstract:
Thin dielectric stacks comprising a main insulating layer and a hydrophobic top coating are commonly used in low voltage electrowetting systems. However, in most cases, thin dielectrics fail to endure persistent electrowetting testing at high voltages, namely beyond the saturation onset, as electrolysis indicates dielectric failure. Careful sample inspection via optical microscopy revealed possibl…
▽ More
Thin dielectric stacks comprising a main insulating layer and a hydrophobic top coating are commonly used in low voltage electrowetting systems. However, in most cases, thin dielectrics fail to endure persistent electrowetting testing at high voltages, namely beyond the saturation onset, as electrolysis indicates dielectric failure. Careful sample inspection via optical microscopy revealed possible local delamination of the top coating under high electric fields. Thus, improvement of the adhesion strength of the hydrophobic top coating to the main dielectric is attempted through a plasma-deposited fluorocarbon interlayer. Interestingly enough the proposed dielectric stack exhibited a) resistance to dielectric breakdown, b) higher contact angle modulation range, and c) electrowetting cycle reversibility. Appearance of electrolysis in the saturation regime is inhibited, suggesting the use of this hydrophobic dielectric stack for the design of more efficient electrowetting systems. The possible causes of the improved performance are investigated by nanoscratch characterization.
△ Less
Submitted 19 October, 2011;
originally announced October 2011.
-
Superior performance of multilayered fluoropolymer films in low voltage electrowetting
Authors:
Dimitrios P. Papageorgiou,
Angeliki Tserepi,
Andreas G. Boudouvis,
Athanasios G. Papathanasiou
Abstract:
The requirement for low operational voltage in electrowetting devices, met using thin dielectrics, is usually connected with serious material failure issues. Dielectric breakdown (visible as electrolysis) is frequently evident slightly beyond the onset of the contact angle saturation. Here, plasma enhanced chemical vapor deposition (PECVD) is used to deposit thin fluorocarbon films prior to the sp…
▽ More
The requirement for low operational voltage in electrowetting devices, met using thin dielectrics, is usually connected with serious material failure issues. Dielectric breakdown (visible as electrolysis) is frequently evident slightly beyond the onset of the contact angle saturation. Here, plasma enhanced chemical vapor deposition (PECVD) is used to deposit thin fluorocarbon films prior to the spin-coating of Teflon\textregistered amorphous fluoropolymer on tetraethoxysilane (TEOS) substrates. The resulting multilayered hydrophobic top coating improves the electrowetting performance of the stack, by showing high resistance to dielectric breakdown at high applied voltages and for continuous long term application of DC and AC voltage. Leakage current measurements during electrowetting experiments with the proposed composite coating showed that current remains fairly constant at consecutive electrowetting tests in contrast to plain Teflon\textregistered coating in which material degradation is evident by a progressive increase of the leakage current after multiple electrowetting tests. Since the proposed composite coating demonstrates increased resistance to material failure and to dielectric breakdown even at thin configurations, its integration in electrowetting devices may impact their reliability, robustness and lifetime.
△ Less
Submitted 18 October, 2011;
originally announced October 2011.
-
A Hybrid Boundary Element Method for Elliptic Problems with Singularities
Authors:
George Pashos,
Athanasios G. Papathanasiou,
Andreas G. Boudouvis
Abstract:
The singularities that arise in elliptic boundary value problems are treated locally by a singular function boundary integral method. This method extracts the leading singular coefficients from a series expansion that describes the local behavior of the singularity. The method is fitted into the framework of the widely used boundary element method (BEM), forming a hybrid technique, with the BEM co…
▽ More
The singularities that arise in elliptic boundary value problems are treated locally by a singular function boundary integral method. This method extracts the leading singular coefficients from a series expansion that describes the local behavior of the singularity. The method is fitted into the framework of the widely used boundary element method (BEM), forming a hybrid technique, with the BEM computing the solution away from the singularity. Results of the hybrid technique are reported for the Motz problem and compared with the results of the standalone BEM and Galerkin/finite element method (GFEM). The comparison is made in terms of the total flux (i.e. the capacitance in the case of electrostatic problems) on the Dirichlet boundary adjacent to the singularity, which is essentially the integral of the normal derivative of the solution. The hybrid method manages to reduce the error in the computed capacitance by a factor of 10, with respect to the BEM and GFEM.
△ Less
Submitted 18 June, 2010;
originally announced June 2010.
-
The normal field instability under side-wall effects: comparison of experiments and computations
Authors:
C Gollwitzer,
A N Spyropoulos,
A G Papathanasiou,
A G Boudouvis,
R Richter
Abstract:
We consider a single spike of ferrofluid, arising in a small cylindrical container, when a vertically oriented magnetic field is applied. The height of the spike as well as the surface topography is measured experimentally by two different technologies and calculated numerically using the finite element method. As a consequence of the finite size of the container, the numerics uncovers an imperf…
▽ More
We consider a single spike of ferrofluid, arising in a small cylindrical container, when a vertically oriented magnetic field is applied. The height of the spike as well as the surface topography is measured experimentally by two different technologies and calculated numerically using the finite element method. As a consequence of the finite size of the container, the numerics uncovers an imperfect bifurcation to a single spike solution, which is forward. This is in contrast to the standard transcritical bifurcation to hexagons, common for rotational symmetric systems with broken up-down symmetry. The numerical findings are corroborated in the experiments. The small hysteresis observed is explained in terms of a hysteretic wetting of the side wall.
△ Less
Submitted 24 April, 2009;
originally announced April 2009.
