Showing 1–25 of 25 results for author: Papadakis, G T

Coherent Thermal Emission from Large-Scale Suspended Nanomechanical Membranes

Authors: Mitradeep Sarkar, Rajashree Haldankar, Julien Legendre, Gloria Davidova, Adrian Bachtold, Georgia T. Papadakis

Abstract: Thermal radiation is an abundant form of incoherent light. Generating coherent infrared light through incandescence promises a cheap alternative to the costly and epitaxially complex quantum cascade laser, however it remains a fundamental challenge. Previous approaches leveraged the spatial coherence of polaritonic excitations that occur in the thermal near-field, by diffracting them into the far-… ▽ More Thermal radiation is an abundant form of incoherent light. Generating coherent infrared light through incandescence promises a cheap alternative to the costly and epitaxially complex quantum cascade laser, however it remains a fundamental challenge. Previous approaches leveraged the spatial coherence of polaritonic excitations that occur in the thermal near-field, by diffracting them into the far-field zone via patterned micro- or nano-scatterers. This approach requires high-resolution lithography, is difficult to scale-up, and yields limited outcoupled radiation due to the intrinsically polarized nature of polaritons. We overcome these limitations and report coherent thermal emission through simple wave interference. We show that unpatterned, millimeter-scale, suspended nanomechanical membranes of SiC operate for both linear polarizations and exhibit antenna-like directionality without relying on the excitation of near-field polaritons. The ability to generate polarization-insensitive, narrowband and spatially coherent incandescent light without lithography at large scales paves the way towards democratizing thermal infrared technologies. △ Less

Submitted 4 September, 2024; originally announced September 2024.

Mid-IR chirality and chiral thermal emission through twisting

Authors: Michael T. Enders, Mitradeep Sarkar, Evgenia Klironomou, Michela Florinda Picardi, Riccardo Bertini, Aleksandra Deeva, Georgia T. Papadakis

Abstract: Chirality in the mid-infrared spectral range plays a crucial role across physical, chemical, and biological sciences, yet sources of chiral infrared light do not currently exist. Their development, using principles from the mature field of metamaterials, requires complex three-dimensional architectures that call for high-resolution lithography. We leverage the natural optical anisotropy found in s… ▽ More Chirality in the mid-infrared spectral range plays a crucial role across physical, chemical, and biological sciences, yet sources of chiral infrared light do not currently exist. Their development, using principles from the mature field of metamaterials, requires complex three-dimensional architectures that call for high-resolution lithography. We leverage the natural optical anisotropy found in several van der Waals crystals, for example $α$-MoO$_3$, to demonstrate experimentally that its twisted bilayers break inversion-rotation symmetry and are thereby intrinsically chiral. Via direct thermal emission measurements of microscopic twisted bilayers, we demonstrate that these heterostructures generate chiral light through incandescence. Twisted configurations of van der Waals materials do not require any lithography, and offer a platform for large-scale chiral filters and thermal sources beyond conventional meta-architectures. △ Less

Submitted 13 June, 2025; v1 submitted 4 September, 2024; originally announced September 2024.

Design of narrowband infrared emitters by hybridizing guided-mode resonance structures with van der Waals materials

Authors: Mehrdad Shokooh-Saremi, Maxime Giteau, Mitradeep Sarkar, Georgia T. Papadakis

Abstract: In this paper, narrowband emitters have been designed using particle swarm optimization (PSO) in the 10-20 μm infrared range. The device structure consists of an anisotropic α-MoO3 layer combined with the one- and two-dimensional guided-mode resonance structures. Well-defined absorption lines are present in the reflection spectrum for both TE and TM polarizations, thereby yielding narrowband emiss… ▽ More In this paper, narrowband emitters have been designed using particle swarm optimization (PSO) in the 10-20 μm infrared range. The device structure consists of an anisotropic α-MoO3 layer combined with the one- and two-dimensional guided-mode resonance structures. Well-defined absorption lines are present in the reflection spectrum for both TE and TM polarizations, thereby yielding narrowband emissivity at desired wavelengths. The band structure of the designed emitters under TM polarization demonstrates distinct features unlike its TE counterpart. These features are attributed to the interaction between guided-mode resonances and phonon polaritons. The results are relevant for applications in active and passive photonic elements in mid- and long-wave IR bands. △ Less

Submitted 20 February, 2024; originally announced February 2024.

Hot-carrier thermophotovoltaic systems

Authors: Kartika N. Nimje, Maxime Giteau, Georgia T. Papadakis

Abstract: A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and PV cell is spectrally monochromatic, the TPV system can approach the Carnot thermodynamic efficiency limit. Nonetheless, this occurs at the expense of vanishing extracted electrical power density. Conversely, a spectr… ▽ More A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and PV cell is spectrally monochromatic, the TPV system can approach the Carnot thermodynamic efficiency limit. Nonetheless, this occurs at the expense of vanishing extracted electrical power density. Conversely, a spectrally broadband radiative heat exchange between the emitter and the cell yields maximal TPV power density at the expense of low efficiency. By leveraging hot-carriers as a means to mitigate thermalization losses within the cell, we demonstrate that one can alleviate this trade-off between power density and efficiency. Via detailed balance analysis, we show analytically that one can reach near-Carnot conversion efficiencies close to the maximum power point, which is unattainable with conventional TPV systems. We derive analytical relations between intrinsic device parameters and performance metrics, which serve as design rules for hot-carrier-based TPV systems. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 10 pages, 7 figures

Deep-subwavelength Phase Retarders at Mid-Infrared Frequencies with van der Waals Flakes

Authors: Michael T. Enders, Mitradeep Sarkar, Aleksandra Deeva, Maxime Giteau, Hanan Herzig Sheinfux, Mehrdad Shokooh-Saremi, Frank H. L. Koppens, Georgia T. Papadakis

Abstract: Phase retardation is a cornerstone of modern optics, yet, at mid-infrared (mid-IR) frequencies, it remains a major challenge due to the scarcity of simultaneously transparent and birefringent crystals. Most materials resonantly absorb due to lattice vibrations occurring at mid-IR frequencies, and natural birefringence is weak, calling for hundreds of microns to millimeters-thick phase retarders fo… ▽ More Phase retardation is a cornerstone of modern optics, yet, at mid-infrared (mid-IR) frequencies, it remains a major challenge due to the scarcity of simultaneously transparent and birefringent crystals. Most materials resonantly absorb due to lattice vibrations occurring at mid-IR frequencies, and natural birefringence is weak, calling for hundreds of microns to millimeters-thick phase retarders for sufficient polarization rotation. We demonstrate mid-IR phase retardation with flakes of $α$-molybdenum trioxide ($α$-MoO$_3$) that are more than ten times thinner than the operational wavelength, achieving 90 degrees polarization rotation within one micrometer of material. We report conversion ratios above 50% in reflection and transmission mode, and wavelength tunability by several micrometers. Our results showcase that exfoliated flakes of low-dimensional crystals can serve as a platform for mid-IR miniaturized integrated polarization control. △ Less

Submitted 29 June, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 8 pages, 5 figures

Retrieving optical parameters of emerging van der Waals flakes

Authors: Mitradeep Sarkar, Michael T. Enders, Mehrdad Shokooh-Saremi, Kenji Watanabe, Takashi Taniguchi, Hanan Herzig Sheinfux, Frank H. L. Koppens, Georgia Theano Papadakis

Abstract: High-quality low-dimensional layered and van der Waals materials are typically exfoliated, with sample cross sectional areas on the order of tens to hundreds of microns. The small size of flakes makes the experimental characterization of their dielectric properties unsuitable with conventional spectroscopic ellipsometry, due to beam-sample size mismatch and non-uniformities of the crystal axes. Pr… ▽ More High-quality low-dimensional layered and van der Waals materials are typically exfoliated, with sample cross sectional areas on the order of tens to hundreds of microns. The small size of flakes makes the experimental characterization of their dielectric properties unsuitable with conventional spectroscopic ellipsometry, due to beam-sample size mismatch and non-uniformities of the crystal axes. Previously, the experimental measurement of the dielectrirc permittivity of such microcrystals was carried out with near-field tip-based scanning probes. These measurements are sensitive to external conditions like vibrations and temperature, and require non-deterministic numerical fitting to some a priori known model. We present an alternative method to extract the in-plane dielectric permittivity of van der Waals microcrystals, based on identifying reflectance minima in spectroscopic measurements. Our method does not require complex fitting algorithms nor near field tip-based measurements and accommodates for small-area samples. We demonstrate the robustness of our method using hexagonal boron nitride and α-MoO3, and recover their dielectric permittivities that are close to literature values. △ Less

Submitted 29 May, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: 10 pages, 4 figure and 3 tables

Thermodynamic performance bounds for radiative heat engines

Authors: Maxime Giteau, Michela F. Picardi, Georgia T. Papadakis

Abstract: Heat engines cannot generally operate at maximum power and efficiency, imposing a trade-off between the two. Here, we highlight the exact nature of this trade-off for engines that exchange heat radiatively with a hot source. We derive simple analytical expressions for the performance bounds of reciprocal and nonreciprocal radiative heat engines. We also highlight that radiative engines can achieve… ▽ More Heat engines cannot generally operate at maximum power and efficiency, imposing a trade-off between the two. Here, we highlight the exact nature of this trade-off for engines that exchange heat radiatively with a hot source. We derive simple analytical expressions for the performance bounds of reciprocal and nonreciprocal radiative heat engines. We also highlight that radiative engines can achieve a better power-efficiency trade-off than linear ones. These bounds are especially relevant for thermophotovoltaics, offering useful metrics against which to compare device performance. △ Less

Submitted 18 December, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Comments: 7 pages, 6 figures

Maximal Violation of Kirchhoff's Law in Planar Heterostructures

Authors: Lu Wang, F. Javier García de Abajo, Georgia T. Papadakis

Abstract: Violating Kirchhoff's law has so far required nonreciprocal materials patterned in microstructures. In these configurations, the excitation of a guided or polaritonic mode that lies outside the light cone, often via gratings, was a requirement. Here, we describe how nonreciprocity manifests itself in pattern-free heterostructures. We demonstrate that a resonant mode in a dielectric spacer separati… ▽ More Violating Kirchhoff's law has so far required nonreciprocal materials patterned in microstructures. In these configurations, the excitation of a guided or polaritonic mode that lies outside the light cone, often via gratings, was a requirement. Here, we describe how nonreciprocity manifests itself in pattern-free heterostructures. We demonstrate that a resonant mode in a dielectric spacer separating a nonreciprocal film from a back-reflector suffices to maximally violate Kirchhoff's law, and identify the minimal dielectric requirements for such functionality, which are satisfied by currently available materials. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Design rules for active control of narrowband thermal emission using phase-change materials

Authors: Maxime Giteau, Mitradeep Sarkar, Maria Paula Ayala, Michael T. Enders, Georgia T. Papadakis

Abstract: We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral sh… ▽ More We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral shifting between two emission wavelengths, respectively. The proposed systems are lithography-free and consist of one or several thin emitter layers, a spacer layer which includes the PCM, and a back reflector. Our model applies to normal incidence, though we show that the behavior is essentially angle-independent. The presented formalism is general and can be extended to \textit{any} mechanism that modifies the optical properties of a material, such as electrostatic gating or thermo-optical modulation. △ Less

Submitted 18 May, 2023; v1 submitted 5 October, 2022; originally announced October 2022.

Comments: 11 pages, 7 figures

Dynamic modulation of thermal emission -- a Tutorial

Authors: Michela Florinda Picardi, Kartika Narayan Nimje, Georgia T. Papadakis

Abstract: Thermal emission is typically associated with a blackbody at a temperature above absolute zero, which exchanges energy with its environment in the form of radiation. Blackbody thermal emission is largely incoherent both spatially and temporally. Using principles in nanophotonics, thermal emission with characteristics that differ considerably from those of a blackbody have been demonstrated. In par… ▽ More Thermal emission is typically associated with a blackbody at a temperature above absolute zero, which exchanges energy with its environment in the form of radiation. Blackbody thermal emission is largely incoherent both spatially and temporally. Using principles in nanophotonics, thermal emission with characteristics that differ considerably from those of a blackbody have been demonstrated. In particular, by leveraging intrinsic properties of emerging materials or via nanostructuring at the wavelength or sub-wavelength scale, one can gain control over the directionality, temporal coherence, and other more exotic properties of thermal radiation. Typically, however, these are fixed at the time of fabrication. Gaining dynamic control of thermal emission requires exploiting external mechanisms that actively modulate radiative properties. Numerous applications can benefit from such thermal emission control, for example in solar energy harvesting, thermo-photovoltaic energy conversion, radiative cooling, sensing, spectroscopy, imaging and thermal camouflage. In this tutorial, we introduce thermal emission in two domains: the far-field, and the near-field, and we outline experimental approaches for probing thermal radiation in both ranges. We discuss ways for tailoring the spatial and temporal coherence of thermal emission and present available mechanisms to actively tune these characteristics. △ Less

Submitted 20 March, 2023; v1 submitted 4 October, 2022; originally announced October 2022.

Comments: 19 pages, 14 figures, tutorial

Journal ref: Journal of Applied Physics 133, 111101 (2023)

Lithography-free directional control of thermal emission

Authors: Mitradeep Sarkar, Maxime Giteau, Michael Enders, Georgia T. Papadakis

Abstract: Blackbody thermal emission is spatially diffuse. Achieving highly directional thermal emission typically requires nanostructuring the surface of the thermally emissive medium. The most common configuration is a subwavelength grating that scatters surface polaritonic modes from the near-field to the far-field and produces antenna-like lobes of thermal emission. This concept, however, is typically l… ▽ More Blackbody thermal emission is spatially diffuse. Achieving highly directional thermal emission typically requires nanostructuring the surface of the thermally emissive medium. The most common configuration is a subwavelength grating that scatters surface polaritonic modes from the near-field to the far-field and produces antenna-like lobes of thermal emission. This concept, however, is typically limited to a particular linear polarization, and requires sophisticated lithography. Here, we revisit the simple motif of a planar Salisbury screen. We show analytically how the interplay between the real and imaginary part of the dielectric permittivity of the emitter layer defines the directional characteristics of emission, which can range from diffuse to highly directional. We propose a realistic configuration and show that hexagonal Boron Nitride thin films can enable grating-like thermal emission lobes in a lithography-free platform. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Perspective on Near-Field Radiative Heat Transfer

Authors: Mariano Pascale, Maxime Giteau, Georgia T. Papadakis

Abstract: Although near-field radiative heat transfer was introduced in the 1950's, interest in the field has recently revived, as the effect promises improved performance in various applications where contactless temperature regulation in the small-scale is a requirement. With progress in computational electromagnetics as well as in nanoinstrumentation, it has become possible to simulate the effect in comp… ▽ More Although near-field radiative heat transfer was introduced in the 1950's, interest in the field has recently revived, as the effect promises improved performance in various applications where contactless temperature regulation in the small-scale is a requirement. With progress in computational electromagnetics as well as in nanoinstrumentation, it has become possible to simulate the effect in complex configurations and to measure it with high precision. In this Perspective, we highlight key theoretical and experimental advances in the field, and we discuss important developments in tailoring and enhancing near-field thermal emission and heat transfer. We discuss opportunities in heat-to-electricity energy conversion with thermophotovoltaic systems, as well as non-reciprocal heat transfer, as two of many recent focus topics in the field. Finally, we highlight key experimental challenges and opportunities with emerging materials, for probing near-field heat transfer for relevant technologies in the large-scale. △ Less

Submitted 8 March, 2023; v1 submitted 3 October, 2022; originally announced October 2022.

Tight bounds and the role of optical loss in polariton-mediated near-field heat transfer

Authors: Mariano Pascale, Georgia T. Papadakis

Abstract: We introduce an analytical framework for near-field radiative heat transfer in bulk plasmonic and polar media. Considering material dispersion, we derive a closed-form expression for the radiative thermal conductance, which disentangles the role of optical loss from other material dispersion characteristics, such as the spectral width of the Reststrahlen band in polar dielectrics, as well as from… ▽ More We introduce an analytical framework for near-field radiative heat transfer in bulk plasmonic and polar media. Considering material dispersion, we derive a closed-form expression for the radiative thermal conductance, which disentangles the role of optical loss from other material dispersion characteristics, such as the spectral width of the Reststrahlen band in polar dielectrics, as well as from the temperature. We provide a universal condition for maximizing heat transfer that defines the optimal interplay between a material's optical loss and polariton resonance frequency, based on which we introduce tight bounds to near-field heat transfer. With this formalism, one can quantitatively evaluate all polaritonic materials in terms of their performance as near-field thermal emitters. △ Less

Submitted 6 March, 2023; v1 submitted 4 July, 2022; originally announced July 2022.

Thermodynamics of light management in near-field thermophotovoltaics

Authors: Georgia T. Papadakis, Meir Orenstein, Eli Yablonovitch, Shanhui Fan

Abstract: We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here, we develop an analytic model that captures the physics of near-field TPV systems and can predict their performance metrics. Using our model, we identify two imp… ▽ More We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here, we develop an analytic model that captures the physics of near-field TPV systems and can predict their performance metrics. Using our model, we identify two important opportunities of TPV systems operating in the near-field. First, we show analytically that enhancement of radiative recombination is a natural consequence of operating in the near-field. Second, we note that, owing to photon recycling and minimal radiation leakage in near-field operation, the PV cell used in near-field TPV systems can be much thinner compared to those used in solar PV systems. Since non-radiative recombination is a volumetric effect, use of a thinner cell reduces non-radiative losses per unit area. The combination of these two opportunities leads to increasingly large values of Voc as the TPV vacuum gap decreases. Hence, although operation in the near-field was previously perceived to be beneficial for electrical power density enhancement, here, we emphasize that thin-film near-field TPVs are also significantly advantageous in terms of Voc and consequently conversion efficiency as well as power density. We provide numerical results for an InAs-based thin-film TPV that exhibits efficiency > 50% at an emitter temperature as low as 1100 K. △ Less

Submitted 24 July, 2021; v1 submitted 22 July, 2021; originally announced July 2021.

Comments: 15 pages, 8 figures

Deep subwavelength thermal switch via resonant coupling in monolayer hexagonal boron nitride

Authors: Georgia T. Papadakis, Christopher J. Ciccarino, Lingling Fan, Meir Orenstein, Prineha Narang, Shanhui Fan

Abstract: Unlike the electrical conductance that can be widely modulated within the same material even in deep nanoscale devices, tuning the thermal conductance within a single material system or nanostructure is extremely challenging and requires a large-scale device. This prohibits the realization of robust ON/OFF states in switching the flow of thermal currents. Here, we present the theory of a thermal s… ▽ More Unlike the electrical conductance that can be widely modulated within the same material even in deep nanoscale devices, tuning the thermal conductance within a single material system or nanostructure is extremely challenging and requires a large-scale device. This prohibits the realization of robust ON/OFF states in switching the flow of thermal currents. Here, we present the theory of a thermal switch based on resonant coupling of three photonic resonators, in analogy to the field-effect electronic transistor composed of a source, gate, and drain. As a material platform, we capitalize on the extreme tunability and low-loss resonances observed in the dielectric function of monolayer hexagonal boron nitride (hBN) under controlled strain. We derive the dielectric function of hBN from first principles, including the phonon-polariton linewidths computed by considering phonon isotope and anharmonic phonon-phonon scattering. Subsequently, we propose a strain-controlled hBN-based thermal switch that modulates thermal conductance by more than an order of magnitude, corresponding to an ON/OFF contrast ratio of 98%, in a deep subwavelength nanostructure. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Applied 15, 054002 (2021)

Experimental Demonstration of Dynamic Thermal Regulation using Vanadium Dioxide Thin Films

Authors: Ahmed M. Morsy, Michael T. Barako, Vladan Jankovic, Virginia D. Wheeler, Mark W. Knight, Georgia T. Papadakis, Luke A. Sweatlock, Philip W. C. Hon, Michelle L. Povinelli

Abstract: We present an experimental demonstration of passive, dynamic thermal regulation in a solid-state system with temperature-dependent thermal emissivity switching. We achieve this effect using a multilayered device, comprised of a vanadium dioxide (VO2) thin film on a silicon substrate with a gold back reflector. We experimentally characterize the optical properties of the VO2 film and use the result… ▽ More We present an experimental demonstration of passive, dynamic thermal regulation in a solid-state system with temperature-dependent thermal emissivity switching. We achieve this effect using a multilayered device, comprised of a vanadium dioxide (VO2) thin film on a silicon substrate with a gold back reflector. We experimentally characterize the optical properties of the VO2 film and use the results to optimize device design. Using a calibrated, transient calorimetry experiment we directly measure the temperature fluctuations arising from a time-varying heat load. Under laboratory conditions, we find that the device regulates temperature better than a constant emissivity sample. We use the experimental results to validate our thermal model, which can be used to predict device performance under the conditions of outer space. In this limit, thermal fluctuations are halved with reference to a constant-emissivity sample. △ Less

Submitted 28 February, 2020; originally announced March 2020.

Nonreciprocal metamaterial obeying time-reversal symmetry

Authors: Siddharth Buddhiraju, Alex Song, Georgia T. Papadakis, Shanhui Fan

Abstract: We introduce a class of non-Hermitian systems that break electromagnetic reciprocity while preserving time-reversal symmetry, and describe its novel polarization dynamics. We show that this class of systems can be realized using van der Waals heterostructures involving transition-metal dichalcogenides (TMDs). Our work provides a path towards achieving strong optical nonreciprocity and polarization… ▽ More We introduce a class of non-Hermitian systems that break electromagnetic reciprocity while preserving time-reversal symmetry, and describe its novel polarization dynamics. We show that this class of systems can be realized using van der Waals heterostructures involving transition-metal dichalcogenides (TMDs). Our work provides a path towards achieving strong optical nonreciprocity and polarization-dependent directional amplification using compact, large-area and magnet-free structures. △ Less

Submitted 2 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Lett. 124, 257403 (2020)

Nonreciprocal radiative heat transfer between two planar bodies

Authors: Lingling Fan, Yu Guo, Georgia T. Papadakis, Bo Zhao, Zhexin Zhao, Siddharth Buddhiraju, Meir Orenstein, Shanhui Fan

Abstract: We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermod… ▽ More We develop an analytical framework for nonreciprocal radiative heat transfer in two-body planar systems. Based on our formalism, we identify effects that are uniquely nonreciprocal in near-field heat transfer in planar systems. We further introduce a general thermodynamic constraint that is applicable for both reciprocal and nonreciprocal planar systems, in agreement with the second law of thermodynamics. We numerically demonstrate our findings in an example system consisting of magneto-optical materials. Our formalism applies to both near- and far-field regimes, opening opportunities for exploiting nonreciprocity in two-body radiative heat transfer systems. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Comments: 9 pages, 4 figures. Initial announce: Oct. 20th, 2019

Journal ref: Phys. Rev. B 101, 085407 (2020)

Broadening near-field emission for performance enhancement in thermophotovoltaics

Authors: Georgia T. Papadakis, Siddharth Buddhiraju, Zhexin Zhao, Bo Zhao, Shanhui Fan

Abstract: The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only accurate under idealized conditions, and further show that when non-radiative recombination is taken into account, efficiency improvement can be achieved by broade… ▽ More The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only accurate under idealized conditions, and further show that when non-radiative recombination is taken into account, efficiency improvement can be achieved by broadening the emission spectrum, due to an enhancement in the open-circuit voltage. Broadening the emission spectrum also improves the electrical power density, by increasing the short-circuit current. To practically illustrate these findings, we focus on surface polariton-mediated near-field TPVs. We propose a versatile design strategy for broadening the emission spectrum via stacking of multiple plasmonic thin film layers. As an example, we consider a realistic ITO/InAs TPV, and predict a conversion efficiency of $50\%$ simultaneously with a power density of nearly $80$ W$/\mathrm{cm}^2$ at a $1300$ K emitter temperature. The performance of our proposed system far exceeds previous works in similar systems using a single plasmonic layer emitter. △ Less

Submitted 18 September, 2019; originally announced September 2019.

Experimental demonstration of tunable graphene hyperbolic metamaterial

Authors: Jeremy Brouillet, Georgia T. Papadakis, Harry A. Atwater

Abstract: Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been dem… ▽ More Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been demonstrated experimentally. Here we focus on a graphene/polaritonic dielectric metamaterial, with strong optical resonances arising from the polar response of the dielectric, which are, in general, difficult to actively control. By controlling the doping level of graphene via external bias we experimentally demonstrate a wide range of tunability from a Fermi level of EF = 0 eV to EF = 0.5 eV, which yields an effective epsilon-near-zero crossing and tunable dielectric properties, verified through spectroscopic ellipsometry and transmission measurements. △ Less

Submitted 8 July, 2019; v1 submitted 25 June, 2019; originally announced June 2019.

Gate-tunable near-field heat transfer

Authors: Georgia T. Papadakis, Bo Zhao, Siddharth Buddhiraju, Shanhui Fan

Abstract: Active control over the flow of heat in the near-field holds promise for nanoscale thermal management, with applications in refrigeration, thermophotovoltaics, and thermal circuitry. Analogously to its electronic counterpart, the metal-oxide-semiconductor (MOS) capacitor, we propose a thermal switching mechanism based on accumulation and depletion of charge carriers in an ultra-thin plasmonic film… ▽ More Active control over the flow of heat in the near-field holds promise for nanoscale thermal management, with applications in refrigeration, thermophotovoltaics, and thermal circuitry. Analogously to its electronic counterpart, the metal-oxide-semiconductor (MOS) capacitor, we propose a thermal switching mechanism based on accumulation and depletion of charge carriers in an ultra-thin plasmonic film, via application of external bias. In our proposed configuration, the plasmonic film is placed on top of a polaritonic dielectric material that provides a surface phonon polariton (SPhP) thermal channel, while also ensuring electrical insulation for application of large electric fields. The variation of carrier density in the plasmonic film enables the control of the surface plasmon polariton (SPP) thermal channel. We show that the interaction of the SPP with the SPhP significantly enhances the net heat transfer. We study SiC as the oxide and explore three classes of gate-tunable plasmonic materials: transparent conductive oxides, doped semiconductors, and graphene, and theoretically predict contrast ratios as high as 225%. △ Less

Submitted 6 December, 2018; originally announced December 2018.

Ultra-light Å-scale Optimal Optical Reflectors

Authors: Georgia T. Papadakis, Prineha Narang, Ravishankar Sundararaman, Nicholas Rivera, Hrvoje Buljan, Nader Engheta, Marin Soljacic

Abstract: High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate the behavior of graphene-based Å-scale metamaterials and find that they could act as nearly-perfect reflectors in the mid-long… ▽ More High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate the behavior of graphene-based Å-scale metamaterials and find that they could act as nearly-perfect reflectors in the mid-long wave infrared (IR) range. The low density of states for electron-phonon scattering and interband excitations leads to unprecedented optical properties for graphene heterostructures, especially alternating atomic layers of graphene and hexagonal boron nitride, at wavelengths greater than $10~μ$m. At these wavelengths, these materials exhibit reflectivities exceeding 99.7% at a fraction of the weight of noble metals, as well as plasmonic mode confinement and quality factors that are greater by an order of magnitude compared to noble metals. These findings hold promise for ultra-compact optical components and waveguides for mid-IR applications. Moreover, unlike metals, the photonic properties of these heterostructures could be actively tuned via chemical and/or electrostatic doping, providing exciting possibilities for tunable devices. △ Less

Submitted 20 July, 2017; originally announced July 2017.

Optical Magnetism in Planar Metamaterial Heterostructures

Authors: Georgia T. Papadakis, Dagny Fleischman, Artur Davoyan, Pochi Yeh, Harry A. Atwater

Abstract: Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems… ▽ More Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems are extensively investigated due to their hyperbolic and plasmonic response, which, however, is considered to be limited to TM polarization, based on the general consensus that they do not possess interesting magnetic properties. In this work, we tackle these two seemingly unrelated issues simultaneously, by proposing conceptually and demonstrating experimentally a mechanism for artificial magnetism in planar, 1D metamaterials. We show experimentally that the magnetic response of metal/high-index dielectric hyperbolic metamaterials can be anisotropic, leading to frequency regimes of magnetic hyperbolic dispersion. We investigate the implications of our results for TE polarization and show that such systems can support TE interface-bound states, analogous to their TM counterparts, surface plasmon polaritons. Our results simplify the structural complexity for tailoring artificial magnetism in lithography-free systems and generalize the concept of plasmonic and hyperbolic properties to encompass both TE and TM polarizations at optical frequencies. △ Less

Submitted 5 May, 2017; v1 submitted 9 August, 2016; originally announced August 2016.

Comments: 9 pages, 6 figures

Field-effect induced tunability in planar hyperbolic metamaterials

Authors: Georgia T. Papadakis, Harry A. Atwater

Abstract: We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulatio… ▽ More We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulation of ~200% of the effective electromagnetic parameters along with active control of the anisotropic dispersion surface of hyperbolic metamaterials and enable the opening and closing of photonic band gaps. △ Less

Submitted 23 July, 2015; originally announced July 2015.

Journal ref: Phys. Rev. B 92, 184101 (2015)

Retrieval of material parameters for uniaxial metamaterials

Authors: Georgia T. Papadakis, Pochi Yeh, Harry A. Atwater

Abstract: We present a general method for retrieving the effective tensorial permittivity of any uniaxially anisotropic metamaterial. By relaxing the usually imposed condition of non-magnetic metal/dielectric metamaterials, we also retrieve the permeability tensor and show that hyperbolic metamaterials exhibit a strong diamagnetic response in the visible regime. We obtain global material parameters, directl… ▽ More We present a general method for retrieving the effective tensorial permittivity of any uniaxially anisotropic metamaterial. By relaxing the usually imposed condition of non-magnetic metal/dielectric metamaterials, we also retrieve the permeability tensor and show that hyperbolic metamaterials exhibit a strong diamagnetic response in the visible regime. We obtain global material parameters, directly measurable with spectroscopic ellipsometry and distinguishable from mere wave parameters, by using the generalized dispersion equation for uniaxial crystals along with existing homogenization methods. Our method is analytically and experimentally verified for Ag/SiO2 planar metamaterials with varying number of layers and compared to the effective medium theory. We also propose an experimental method for retrieving material parameters using methods other than ellipsometry. △ Less

Submitted 23 November, 2014; originally announced November 2014.

Comments: 17 pages, 9 figures

MSC Class: 78-XX

Journal ref: Phys. Rev. B 91, 155406 (2015)