Showing 1–47 of 47 results for author: Otten, M

Non-unitary Variational Quantum Eigensolver with the Localized Active Space Method and Cost Mitigation

Authors: Qiaohong Wang, Ruhee D'Cunha, Abhishek Mitra, Yuri Alexeev, Stephen K. Gray, Matthew Otten, Laura Gagliardi

Abstract: Accurately describing strongly correlated systems with affordable quantum resources remains a central challenge for quantum chemistry applications on near and intermediate-term quantum computers. The localized active space self-consistent field (LASSCF) approximates the complete active space self-consistent field (CASSCF) by generating active space-based wave functions within specific fragments wh… ▽ More Accurately describing strongly correlated systems with affordable quantum resources remains a central challenge for quantum chemistry applications on near and intermediate-term quantum computers. The localized active space self-consistent field (LASSCF) approximates the complete active space self-consistent field (CASSCF) by generating active space-based wave functions within specific fragments while treating interfragment correlation with mean-field approach, hence is computationally less expensive. Hardware-efficient ansatzes (HEA) offer affordable and shallower circuits, yet they often fail to capture the necessary correlation. Previously, Jastrow-factor-inspired non-unitary qubit operators were proposed to use with HEA for variational quantum eigensolver (VQE) calculations (nuVQE), as they do not increase circuit depths and recover correlation beyond the mean-field level for Hartree-Fock initial states. Here, we explore running nuVQE with LASSCF as the initial state. The method, named LAS-nuVQE, is shown to recover interfragment correlations, reach chemical accuracy with a small number of gates (<70) in both H4 and square cyclobutadiene. To further address the inherent symmetry-breaking in HEA, we implemented spin-constrained LAS-nuVQE to extend the capabilities of HEA further and show spin-pure results for square cyclobutadiene. We mitigate the increased measurement overhead of nuVQE via Pauli grouping and shot-frugal sampling, reducing measurement costs by up to two orders of magnitude compared to ungrouped operator, and show that one can achieve better accuracy with a small number of shots (10^3-4) per one expectation value calculation compared to noiseless simulations with one or two orders of magnitude more shots. Finally, wall clock time estimates show that, with our measurement mitigation protocols, nuVQE becomes a cheaper and more accurate alternative than VQE with HEA. △ Less

Submitted 22 January, 2025; originally announced January 2025.

How to Build a Quantum Supercomputer: Scaling from Hundreds to Millions of Qubits

Authors: Masoud Mohseni, Artur Scherer, K. Grace Johnson, Oded Wertheim, Matthew Otten, Navid Anjum Aadit, Yuri Alexeev, Kirk M. Bresniker, Kerem Y. Camsari, Barbara Chapman, Soumitra Chatterjee, Gebremedhin A. Dagnew, Aniello Esposito, Farah Fahim, Marco Fiorentino, Archit Gajjar, Abdullah Khalid, Xiangzhou Kong, Bohdan Kulchytskyy, Elica Kyoseva, Ruoyu Li, P. Aaron Lott, Igor L. Markov, Robert F. McDermott, Giacomo Pedretti , et al. (16 additional authors not shown)

Abstract: In the span of four decades, quantum computation has evolved from an intellectual curiosity to a potentially realizable technology. Today, small-scale demonstrations have become possible for quantum algorithmic primitives on hundreds of physical qubits and proof-of-principle error-correction on a single logical qubit. Nevertheless, despite significant progress and excitement, the path toward a ful… ▽ More In the span of four decades, quantum computation has evolved from an intellectual curiosity to a potentially realizable technology. Today, small-scale demonstrations have become possible for quantum algorithmic primitives on hundreds of physical qubits and proof-of-principle error-correction on a single logical qubit. Nevertheless, despite significant progress and excitement, the path toward a full-stack scalable technology is largely unknown. There are significant outstanding quantum hardware, fabrication, software architecture, and algorithmic challenges that are either unresolved or overlooked. These issues could seriously undermine the arrival of utility-scale quantum computers for the foreseeable future. Here, we provide a comprehensive review of these scaling challenges. We show how the road to scaling could be paved by adopting existing semiconductor technology to build much higher-quality qubits, employing system engineering approaches, and performing distributed quantum computation within heterogeneous high-performance computing infrastructures. These opportunities for research and development could unlock certain promising applications, in particular, efficient quantum simulation/learning of quantum data generated by natural or engineered quantum systems. To estimate the true cost of such promises, we provide a detailed resource and sensitivity analysis for classically hard quantum chemistry calculations on surface-code error-corrected quantum computers given current, target, and desired hardware specifications based on superconducting qubits, accounting for a realistic distribution of errors. Furthermore, we argue that, to tackle industry-scale classical optimization and machine learning problems in a cost-effective manner, heterogeneous quantum-probabilistic computing with custom-designed accelerators should be considered as a complementary path toward scalability. △ Less

Submitted 31 January, 2025; v1 submitted 15 November, 2024; originally announced November 2024.

Comments: 76 pages, 46 figures. General revision, added figures, added references, added appendices

Fullerene-encapsulated Cyclic Ozone for the Next Generation of Nano-sized Propellants via Quantum Computation

Authors: Thomas W. Watts, Matthew Otten, Jason T. Necaise, Nam Nguyen, Benjamin Link, Kristen S. Williams, Yuval R. Sanders, Samuel J. Elman, Maria Kieferova, Michael J. Bremner, Kaitlyn J. Morrell, Justin E. Elenewski, Samuel D. Johnson, Luke Mathieson, Kevin M. Obenland, Rashmi Sundareswara, Adam Holmes

Abstract: Cyclic ozone additives have the potential to significantly increase the specific impulse of rocket fuel, which would lead to greater efficiency and reduced costs for space launches, allowing up to one third more payload per rocket. Although practical attempts to capture this isomer have not been successful, cyclic ozone might be stabilized within confined geometries. However, the required syntheti… ▽ More Cyclic ozone additives have the potential to significantly increase the specific impulse of rocket fuel, which would lead to greater efficiency and reduced costs for space launches, allowing up to one third more payload per rocket. Although practical attempts to capture this isomer have not been successful, cyclic ozone might be stabilized within confined geometries. However, the required synthetic methods are challenging to design and need theory-driven inputs that exceed the capabilities of classical methods. Quantum computation could enable these calculations, but the hardware requirements for many practical applications are still unclear. We provide a comprehensive analysis of how quantum methods could aid efforts to isolate cyclic ozone using fullerene encapsulation. Our discussion goes beyond formal complexity analysis, offering both logical and physical overhead estimates for determining ground state energies based on quantum phase estimation (QPE). Together, these data outline a plausible scale for realistic, computationally-assisted molecular design efforts using fault-tolerant quantum computation. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Quantum computing for corrosion-resistant materials and anti-corrosive coatings design

Authors: Nam Nguyen, Thomas W. Watts, Benjamin Link, Kristen S. Williams, Yuval R. Sanders, Samuel J. Elman, Maria Kieferova, Michael J. Bremner, Kaitlyn J. Morrell, Justin Elenewski, Eric B. Isaacs, Samuel D. Johnson, Luke Mathieson, Kevin M. Obenland, Matthew Otten, Rashmi Sundareswara, Adam Holmes

Abstract: Corrosion is a pervasive issue that impacts the structural integrity and performance of materials across various industries, imposing a significant economic impact globally. In fields like aerospace and defense, developing corrosion-resistant materials is critical, but progress is often hindered by the complexities of material-environment interactions. While computational methods have advanced in… ▽ More Corrosion is a pervasive issue that impacts the structural integrity and performance of materials across various industries, imposing a significant economic impact globally. In fields like aerospace and defense, developing corrosion-resistant materials is critical, but progress is often hindered by the complexities of material-environment interactions. While computational methods have advanced in designing corrosion inhibitors and corrosion-resistant materials, they fall short in understanding the fundamental corrosion mechanisms due to the highly correlated nature of the systems involved. This paper explores the potential of leveraging quantum computing to accelerate the design of corrosion inhibitors and corrosion-resistant materials, with a particular focus on magnesium and niobium alloys. We investigate the quantum computing resources required for high-fidelity electronic ground-state energy estimation (GSEE), which will be used in our hybrid classical-quantum workflow. Representative computational models for magnesium and niobium alloys show that 2292 to 38598 logical qubits and $(1.04$ to $1962) \times 10^{13}$ T-gates are required for simulating the ground-state energy of these systems under the first quantization encoding using plane waves basis. △ Less

Submitted 4 April, 2025; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: 14+36 pages, 7+12 figures

Quantum Resources Required for Binding Affinity Calculations of Amyloid beta

Authors: Matthew Otten, Thomas W. Watts, Samuel D. Johnson, Rashmi Sundareswara, Zhihui Wang, Tarini S. Hardikar, Kenneth Heitritter, James Brown, Kanav Setia, Adam Holmes

Abstract: Amyloid beta, an intrinsically disordered protein, plays a seemingly important but not well-understood role in neurodegenerative diseases like Alzheimer's disease. A key feature of amyloid beta, which could lead to potential therapeutic intervention pathways, is its binding affinity to certain metal centers, like iron and copper. Numerically calculating such binding affinities is a computationally… ▽ More Amyloid beta, an intrinsically disordered protein, plays a seemingly important but not well-understood role in neurodegenerative diseases like Alzheimer's disease. A key feature of amyloid beta, which could lead to potential therapeutic intervention pathways, is its binding affinity to certain metal centers, like iron and copper. Numerically calculating such binding affinities is a computationally challenging task, involving strongly correlated metal centers. A key bottleneck in understanding the binding affinity is obtaining estimates of the ground state energy. Quantum computers have the potential to accelerate such calculations but it is important to understand the quantum resources required. In this work, we detail a computational workflow for binding affinity calculations for amyloid beta utilizing quantum algorithms, providing estimated quantum resources required, at both the logical and hardware level. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Architecture for fast implementation of qLDPC codes with optimized Rydberg gates

Authors: C. Poole, T. M. Graham, M. A. Perlin, M. Otten, M. Saffman

Abstract: We propose an implementation of bivariate bicycle codes (Nature {\bf 627}, 778 (2024)) based on long-range Rydberg gates between stationary neutral atom qubits. An optimized layout of data and ancilla qubits reduces the maximum Euclidean communication distance needed for non-local parity check operators. An optimized Rydberg gate pulse design enables $\sf CZ$ entangling operations with fidelity… ▽ More We propose an implementation of bivariate bicycle codes (Nature {\bf 627}, 778 (2024)) based on long-range Rydberg gates between stationary neutral atom qubits. An optimized layout of data and ancilla qubits reduces the maximum Euclidean communication distance needed for non-local parity check operators. An optimized Rydberg gate pulse design enables $\sf CZ$ entangling operations with fidelity ${\mathcal F}>0.999$ at a distance greater than $12~μ\rm m$. The combination of optimized layout and gate design leads to a quantum error correction cycle time of $\sim 1.28~\rm ms$ for a $[[144,12,12]]$ code, nearly a factor of two improvement over previous designs. △ Less

Submitted 24 December, 2024; v1 submitted 29 April, 2024; originally announced April 2024.

Comments: revised with additional analysis of long range gate fidelity. 5 figures

Journal ref: Phys. Rev. A 111, 022433 (2025)

QREChem: Quantum Resource Estimation Software for Chemistry Applications

Authors: Matthew Otten, Byeol Kang, Dmitry Fedorov, Anouar Benali, Salman Habib, Yuri Alexeev, Stephen K. Gray

Abstract: As quantum hardware continues to improve, more and more application scientists have entered the field of quantum computing. However, even with the rapid improvements in the last few years, quantum devices, especially for quantum chemistry applications, still struggle to perform calculations that classical computers could not calculate. In lieu of being able to perform specific calculations, it is… ▽ More As quantum hardware continues to improve, more and more application scientists have entered the field of quantum computing. However, even with the rapid improvements in the last few years, quantum devices, especially for quantum chemistry applications, still struggle to perform calculations that classical computers could not calculate. In lieu of being able to perform specific calculations, it is important have a systematic way of estimating the resources necessary to tackle specific problems. Standard arguments about computational complexity provide hope that quantum computers will be useful for problems in quantum chemistry but obscure the true impact of many algorithmic overheads. These overheads will ultimately determine the precise point when quantum computers will perform better than classical computers. We have developed QREChem to provide logical resource estimates for ground state energy estimation in quantum chemistry through a Trotter-based quantum phase estimation approach. QREChem provides resource estimates which include the specific overheads inherent to problems in quantum chemistry by including heuristic estimates of the number of Trotter steps and number of necessary ancilla, allowing for more accurate estimates of the total number of gates. We utilize QREChem to provide logical resource estimates for a variety of small molecules in various basis sets, obtaining estimates in the range of $10^7-10^{15}$ for total number of T gates. We also determine estimates for the FeMoco molecule and compare all estimates to other resource estimation tools. △ Less

Submitted 25 April, 2024; originally announced April 2024.

The Localized Active Space Method with Unitary Selective Coupled Cluster

Authors: Abhishek Mitra, Ruhee D'Cunha, Qiaohong Wang, Matthew R. Hermes, Yuri Alexeev, Stephen K. Gray, Matthew Otten, Laura Gagliardi

Abstract: We introduce a hybrid quantum-classical algorithm, the localized active space unitary selective coupled cluster singles and doubles (LAS-USCCSD) method. Derived from the localized active space unitary coupled cluster (LAS-UCCSD) method, LAS-USCCSD first performs a classical LASSCF calculation, then selectively identifies the most important parameters (cluster amplitudes used to build the multirefe… ▽ More We introduce a hybrid quantum-classical algorithm, the localized active space unitary selective coupled cluster singles and doubles (LAS-USCCSD) method. Derived from the localized active space unitary coupled cluster (LAS-UCCSD) method, LAS-USCCSD first performs a classical LASSCF calculation, then selectively identifies the most important parameters (cluster amplitudes used to build the multireference UCC ansatz) for restoring inter-fragment interaction energy using this reduced set of parameters with the variational quantum eigensolver method. We benchmark LAS-USCCSD against LAS-UCCSD by calculating the total energies of $(\mathrm{H}_2)_2$, $(\mathrm{H}_2)_4$ and \textit{trans}-butadiene, and the magnetic coupling constant for a bimetallic compound [Cr$_2$(OH)$_3$(NH$_3$)$_6$]$^{3+}$. For these systems, we find that LAS-USCCSD reduces the number of required parameters and thus the circuit depth by at least one order of magnitude, an aspect which is important for the practical implementation of multireference hybrid quantum-classical algorithms like LAS-UCCSD on near-term quantum computers. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Investigating the Performance of Language Models for Completing Code in Functional Programming Languages: a Haskell Case Study

Authors: Tim van Dam, Frank van der Heijden, Philippe de Bekker, Berend Nieuwschepen, Marc Otten, Maliheh Izadi

Abstract: Language model-based code completion models have quickly grown in use, helping thousands of developers write code in many different programming languages. However, research on code completion models typically focuses on imperative languages such as Python and JavaScript, which results in a lack of representation for functional programming languages. Consequently, these models often perform poorly… ▽ More Language model-based code completion models have quickly grown in use, helping thousands of developers write code in many different programming languages. However, research on code completion models typically focuses on imperative languages such as Python and JavaScript, which results in a lack of representation for functional programming languages. Consequently, these models often perform poorly on functional languages such as Haskell. To investigate whether this can be alleviated, we evaluate the performance of two language models for code, CodeGPT and UniXcoder, on the functional programming language Haskell. We fine-tune and evaluate the models on Haskell functions sourced from a publicly accessible Haskell dataset on HuggingFace. Additionally, we manually evaluate the models using our novel translated HumanEval dataset. Our automatic evaluation shows that knowledge of imperative programming languages in the pre-training of LLMs may not transfer well to functional languages, but that code completion on functional languages is feasible. Consequently, this shows the need for more high-quality Haskell datasets. A manual evaluation on HumanEval-Haskell indicates CodeGPT frequently generates empty predictions and extra comments, while UniXcoder more often produces incomplete or incorrect predictions. Finally, we release HumanEval-Haskell, along with the fine-tuned models and all code required to reproduce our experiments on GitHub (https://github.com/AISE-TUDelft/HaskellCCEval). △ Less

Submitted 22 March, 2024; originally announced March 2024.

Comments: To appear in the First Special Event on AI Foundation Models and Software Engineering (FORGE 2024)

Language Models for Code Completion: A Practical Evaluation

Authors: Maliheh Izadi, Jonathan Katzy, Tim van Dam, Marc Otten, Razvan Mihai Popescu, Arie van Deursen

Abstract: Transformer-based language models for automatic code completion have shown great promise so far, yet the evaluation of these models rarely uses real data. This study provides both quantitative and qualitative assessments of three public code language models when completing real-world code. We first developed an open-source IDE extension, Code4Me, for the online evaluation of the models. We collect… ▽ More Transformer-based language models for automatic code completion have shown great promise so far, yet the evaluation of these models rarely uses real data. This study provides both quantitative and qualitative assessments of three public code language models when completing real-world code. We first developed an open-source IDE extension, Code4Me, for the online evaluation of the models. We collected real auto-completion usage data for over a year from more than 1200 users, resulting in over 600K valid completions. These models were then evaluated using six standard metrics across twelve programming languages. Next, we conducted a qualitative study of 1690 real-world completion requests to identify the reasons behind the poor model performance. A comparative analysis of the models' performance in online and offline settings was also performed, using benchmark synthetic datasets and two masking strategies. Our findings suggest that while developers utilize code completion across various languages, the best results are achieved for mainstream languages such as Python and Java. InCoder outperformed the other models across all programming languages, highlighting the significance of training data and objectives. Our study also revealed that offline evaluations do not accurately reflect real-world scenarios. Upon qualitative analysis of the model's predictions, we found that 66.3% of failures were due to the models' limitations, 24.4% occurred due to inappropriate model usage in a development context, and 9.3% were valid requests that developers overwrote. Given these findings, we propose several strategies to overcome the current limitations. These include refining training objectives, improving resilience to typographical errors, adopting hybrid approaches, and enhancing implementations and usability. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: To be published in the proceedings of the 46th IEEE/ACM International Conference on Software Engineering (ICSE 2024)

Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions

Authors: Yuri Alexeev, Maximilian Amsler, Paul Baity, Marco Antonio Barroca, Sanzio Bassini, Torey Battelle, Daan Camps, David Casanova, Young Jai Choi, Frederic T. Chong, Charles Chung, Chris Codella, Antonio D. Corcoles, James Cruise, Alberto Di Meglio, Jonathan Dubois, Ivan Duran, Thomas Eckl, Sophia Economou, Stephan Eidenbenz, Bruce Elmegreen, Clyde Fare, Ismael Faro, Cristina Sanz Fernández, Rodrigo Neumann Barros Ferreira , et al. (102 additional authors not shown)

Abstract: Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of… ▽ More Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions. △ Less

Submitted 19 September, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Comments: 65 pages, 15 figures; comments welcome

Journal ref: Future Generation Computer Systems, Volume 160, November 2024, Pages 666-710

Simulating Neutral Atom Quantum Systems with Tensor Network States

Authors: James Allen, Matthew Otten, Stephen Gray, Bryan K. Clark

Abstract: In this paper, we describe a tensor network simulation of a neutral atom quantum system under the presence of noise, while introducing a new purity-preserving truncation technique that compromises between the simplicity of the matrix product state and the positivity of the matrix product density operator. We apply this simulation to a near-optimized iteration of the quantum approximate optimizatio… ▽ More In this paper, we describe a tensor network simulation of a neutral atom quantum system under the presence of noise, while introducing a new purity-preserving truncation technique that compromises between the simplicity of the matrix product state and the positivity of the matrix product density operator. We apply this simulation to a near-optimized iteration of the quantum approximate optimization algorithm on a transverse field Ising model in order to investigate the influence of large system sizes on the performance of the algorithm. We find that while circuits with a large number of qubits fail more often under noise that depletes the qubit population, their outputs on a successful measurement are just as robust under Rydberg atom dissipation or qubit dephasing as smaller systems. However, such circuits might not perform as well under coherent multi-qubit errors such as Rydberg atom crosstalk. We also find that the optimized parameters are especially robust to noise, suggesting that a noisier quantum system can be used to find the optimal parameters before switching to a cleaner system for measurements of observables. △ Less

Submitted 30 May, 2025; v1 submitted 15 September, 2023; originally announced September 2023.

Comments: 17 pages, 16 figures

State preparation in quantum algorithms for fragment-based quantum chemistry

Authors: Ruhee D'Cunha, Matthew Otten, Matthew R. Hermes, Laura Gagliardi, Stephen K. Gray

Abstract: State preparation for quantum algorithms is crucial for achieving high accuracy in quantum chemistry and competing with classical algorithms. The localized active space unitary coupled cluster (LAS-UCC) algorithm iteratively loads a fragment-based multireference wave function onto a quantum computer. In this study, we compare two state preparation methods, quantum phase estimation (QPE) and direct… ▽ More State preparation for quantum algorithms is crucial for achieving high accuracy in quantum chemistry and competing with classical algorithms. The localized active space unitary coupled cluster (LAS-UCC) algorithm iteratively loads a fragment-based multireference wave function onto a quantum computer. In this study, we compare two state preparation methods, quantum phase estimation (QPE) and direct initialization (DI), for each fragment. We analyze the impact of QPE parameters, such as the number of ancilla qubits and Trotter steps, on the prepared state. We find a trade-off between the methods, where DI requires fewer resources for smaller fragments, while QPE is more efficient for larger fragments. Our resource estimates highlight the benefits of system fragmentation in state preparation for subsequent quantum chemical calculations. These findings have broad applications for preparing multireference quantum chemical wave functions on quantum circuits, particularly via QPE circuits. △ Less

Submitted 7 June, 2023; v1 submitted 29 May, 2023; originally announced May 2023.

Comments: 21 pages, 10 figures

Pure dephasing induced single-photon parametric down-conversion in an ultrastrong coupled plasmon-exciton system

Authors: Ruben Pompe, Matthias Hensen, Matthew Otten, Stephen K. Gray, Walter Pfeiffer

Abstract: In coupled quantum systems pure dephasing mechanisms acting on one constituent of the hybrid system break symmetry and enable optical transitions which are forbidden in the non-coupled system, i.e., the pure dephasing bath opens a cascaded dissipation pathway. Here we show that this mechanism enables single-photon induced parametric down-conversion in an ultrastrongly coupled plasmon-exciton syste… ▽ More In coupled quantum systems pure dephasing mechanisms acting on one constituent of the hybrid system break symmetry and enable optical transitions which are forbidden in the non-coupled system, i.e., the pure dephasing bath opens a cascaded dissipation pathway. Here we show that this mechanism enables single-photon induced parametric down-conversion in an ultrastrongly coupled plasmon-exciton system. Fast pure dephasing of the exciton is shown to support photon pair generation as the dominant energy relaxation pathway. △ Less

Submitted 25 July, 2022; originally announced July 2022.

The learnability of Pauli noise

Authors: Senrui Chen, Yunchao Liu, Matthew Otten, Alireza Seif, Bill Fefferman, Liang Jiang

Abstract: Recently, several quantum benchmarking algorithms have been developed to characterize noisy quantum gates on today's quantum devices. A well-known issue in benchmarking is that not everything about quantum noise is learnable due to the existence of gauge freedom, leaving open the question of what information about noise is learnable and what is not, which has been unclear even for a single CNOT ga… ▽ More Recently, several quantum benchmarking algorithms have been developed to characterize noisy quantum gates on today's quantum devices. A well-known issue in benchmarking is that not everything about quantum noise is learnable due to the existence of gauge freedom, leaving open the question of what information about noise is learnable and what is not, which has been unclear even for a single CNOT gate. Here we give a precise characterization of the learnability of Pauli noise channels attached to Clifford gates, showing that learnable information corresponds to the cycle space of the pattern transfer graph of the gate set, while unlearnable information corresponds to the cut space. This implies the optimality of cycle benchmarking, in the sense that it can learn all learnable information about Pauli noise. We experimentally demonstrate noise characterization of IBM's CNOT gate up to 2 unlearnable degrees of freedom, for which we obtain bounds using physical constraints. In addition, we give an attempt to characterize the unlearnable information by assuming perfect initial state preparation. However, based on the experimental data, we conclude that this assumption is inaccurate as it yields unphysical estimates, and we obtain a lower bound on state preparation noise. △ Less

Submitted 23 December, 2022; v1 submitted 13 June, 2022; originally announced June 2022.

Comments: 33 pages, 11 figures. Close to accepted version

Journal ref: Nature Communications 14, 52 (2023)

Quantum Kerr Learning

Authors: Junyu Liu, Changchun Zhong, Matthew Otten, Anirban Chandra, Cristian L. Cortes, Chaoyang Ti, Stephen K Gray, Xu Han

Abstract: Quantum machine learning is a rapidly evolving field of research that could facilitate important applications for quantum computing and also significantly impact data-driven sciences. In our work, based on various arguments from complexity theory and physics, we demonstrate that a single Kerr mode can provide some "quantum enhancements" when dealing with kernel-based methods. Using kernel properti… ▽ More Quantum machine learning is a rapidly evolving field of research that could facilitate important applications for quantum computing and also significantly impact data-driven sciences. In our work, based on various arguments from complexity theory and physics, we demonstrate that a single Kerr mode can provide some "quantum enhancements" when dealing with kernel-based methods. Using kernel properties, neural tangent kernel theory, first-order perturbation theory of the Kerr non-linearity, and non-perturbative numerical simulations, we show that quantum enhancements could happen in terms of convergence time and generalization error. Furthermore, we make explicit indications on how higher-dimensional input data could be considered. Finally, we propose an experimental protocol, that we call \emph{quantum Kerr learning}, based on circuit QED. △ Less

Submitted 30 November, 2022; v1 submitted 20 May, 2022; originally announced May 2022.

Comments: 20 pages, many figures. v2: significant updates, author added

Journal ref: Mach. Learn.: Sci. Technol. 4 025003, 2023

Localized Quantum Chemistry on Quantum Computers

Authors: Matthew Otten, Matthew R. Hermes, Riddhish Pandharkar, Yuri Alexeev, Stephen K. Gray, Laura Gagliardi

Abstract: Quantum chemistry calculations of large, strongly correlated systems are typically limited by the computation cost that scales exponentially with the size of the system. Quantum algorithms, designed specifically for quantum computers, can alleviate this, but the resources required are still too large for today's quantum devices. Here we present a quantum algorithm that combines a localization of m… ▽ More Quantum chemistry calculations of large, strongly correlated systems are typically limited by the computation cost that scales exponentially with the size of the system. Quantum algorithms, designed specifically for quantum computers, can alleviate this, but the resources required are still too large for today's quantum devices. Here we present a quantum algorithm that combines a localization of multireference wave functions of chemical systems with quantum phase estimation (QPE) and variational unitary coupled cluster singles and doubles (UCCSD) to compute their ground state energy. Our algorithm, termed "local active space unitary coupled cluster" (LAS-UCC), scales linearly with system size for certain geometries, providing a polynomial reduction in the total number of gates compared with QPE, while providing accuracy above that of the variational quantum eigensolver using the UCCSD ansatz and also above that of the classical local active space self-consistent field. The accuracy of LAS-UCC is demonstrated by dissociating (H$_2$)$_2$ into two H$_2$ molecules and by breaking the two double bonds in trans-butadiene and resources estimates are provided for linear chains of up to 20 H$_2$ molecules. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Summary: Chicago Quantum Exchange (CQE) Pulse-level Quantum Control Workshop

Authors: Kaitlin N. Smith, Gokul Subramanian Ravi, Thomas Alexander, Nicholas T. Bronn, Andre Carvalho, Alba Cervera-Lierta, Frederic T. Chong, Jerry M. Chow, Michael Cubeddu, Akel Hashim, Liang Jiang, Olivia Lanes, Matthew J. Otten, David I. Schuster, Pranav Gokhale, Nathan Earnest, Alexey Galda

Abstract: Quantum information processing holds great promise for pushing beyond the current frontiers in computing. Specifically, quantum computation promises to accelerate the solving of certain problems, and there are many opportunities for innovation based on applications in chemistry, engineering, and finance. To harness the full potential of quantum computing, however, we must not only place emphasis o… ▽ More Quantum information processing holds great promise for pushing beyond the current frontiers in computing. Specifically, quantum computation promises to accelerate the solving of certain problems, and there are many opportunities for innovation based on applications in chemistry, engineering, and finance. To harness the full potential of quantum computing, however, we must not only place emphasis on manufacturing better qubits, advancing our algorithms, and developing quantum software. To scale devices to the fault tolerant regime, we must refine device-level quantum control. On May 17-18, 2021, the Chicago Quantum Exchange (CQE) partnered with IBM Quantum and Super.tech to host the Pulse-level Quantum Control Workshop. At the workshop, representatives from academia, national labs, and industry addressed the importance of fine-tuning quantum processing at the physical layer. The purpose of this report is to summarize the topics of this meeting for the quantum community at large. △ Less

Submitted 28 February, 2022; originally announced February 2022.

Latency considerations for stochastic optimizers in variational quantum algorithms

Authors: Matt Menickelly, Yunsoo Ha, Matthew Otten

Abstract: Variational quantum algorithms, which have risen to prominence in the noisy intermediate-scale quantum setting, require the implementation of a stochastic optimizer on classical hardware. To date, most research has employed algorithms based on the stochastic gradient iteration as the stochastic classical optimizer. In this work we propose instead using stochastic optimization algorithms that yield… ▽ More Variational quantum algorithms, which have risen to prominence in the noisy intermediate-scale quantum setting, require the implementation of a stochastic optimizer on classical hardware. To date, most research has employed algorithms based on the stochastic gradient iteration as the stochastic classical optimizer. In this work we propose instead using stochastic optimization algorithms that yield stochastic processes emulating the dynamics of classical deterministic algorithms. This approach results in methods with theoretically superior worst-case iteration complexities, at the expense of greater per-iteration sample (shot) complexities. We investigate this trade-off both theoretically and empirically and conclude that preferences for a choice of stochastic optimizer should explicitly depend on a function of both latency and shot execution times. △ Less

Submitted 17 October, 2022; v1 submitted 31 January, 2022; originally announced January 2022.

Journal ref: Quantum 7, 949 (2023)

Unitary Selective Coupled-Cluster Method

Authors: Dmitry A. Fedorov, Yuri Alexeev, Stephen K. Gray, Matthew Otten

Abstract: Simulating molecules using the Variational Quantum Eigensolver method is one of the promising applications for NISQ-era quantum computers. Designing an efficient ansatz to represent the electronic wave function is crucial in such simulations. Standard unitary coupled-cluster with singles and doubles (UCCSD) ansatz tends to have a large number of insignificant terms that do not lower the energy of… ▽ More Simulating molecules using the Variational Quantum Eigensolver method is one of the promising applications for NISQ-era quantum computers. Designing an efficient ansatz to represent the electronic wave function is crucial in such simulations. Standard unitary coupled-cluster with singles and doubles (UCCSD) ansatz tends to have a large number of insignificant terms that do not lower the energy of the system. In this work, we present a unitary selective coupled-cluster method, a way to construct a unitary coupled-cluster ansatz iteratively using a selection procedure with excitations up to fourth order. This approach uses the electronic Hamiltonian matrix elements and the amplitudes for excitations already present in the ansatz to find the important excitations of higher order and to add them to the ansatz. The important feature of the method is that it systematically reduces the energy error with increasing ansatz size for a set of test molecules. The main advantage of the proposed method is that the effort to increase the ansatz does not require any additional measurements on a quantum computer. △ Less

Submitted 6 May, 2022; v1 submitted 26 September, 2021; originally announced September 2021.

Journal ref: Quantum 6, 703 (2022)

FRET nanoscopy enables seamless imaging of molecular assemblies with sub-nanometer resolution

Authors: Jan-Hendrik Budde, Nicolaas van der Voort, Suren Felekyan, Julian Folz, Ralf Kühnemuth, Paul Lauterjung, Markus Köhler, Andreas Schönle, Julian Sindram, Marius Otten, Matthias Karg, Christian Herrmann, Anders Barth, Claus A. M. Seidel

Abstract: By circumventing the optical diffraction limit, super-resolved fluorescence microscopies enable the study of larger cellular structures and molecular assemblies. However, fluorescence nanoscopy currently lacks the spatiotemporal resolution to resolve distances on the size of individual molecules and reveal the conformational fine structure and dynamics of molecular complexes. Here we establish FRE… ▽ More By circumventing the optical diffraction limit, super-resolved fluorescence microscopies enable the study of larger cellular structures and molecular assemblies. However, fluorescence nanoscopy currently lacks the spatiotemporal resolution to resolve distances on the size of individual molecules and reveal the conformational fine structure and dynamics of molecular complexes. Here we establish FRET nanoscopy by combining colocalization STED microscopy with multiparameter FRET spectroscopy. We simultaneously localize donor and acceptor dyes of single FRET pairs with nanometer resolution and quantitatively measure intramolecular distances with sub-nanometer precision over a large dynamic range. While FRET provides isotropic 3D distance information, colocalization measures the projected distance onto the image plane. The combined information allows us to directly determine its 3D orientation using Pythagoras's theorem. Studying two DNA model systems and the human guanylate binding protein hGBP1, we demonstrate that FRET nanoscopy unravels the interplay between their spatial organization and local molecular conformation in a complex environment. △ Less

Submitted 21 January, 2022; v1 submitted 30 July, 2021; originally announced August 2021.

Comments: Main Text (34 pages, 6 figures) with Supporting Information (90 pages, 29 figures, 20 tables)

Online and Real-Time Tracking in a Surveillance Scenario

Authors: Oliver Urbann, Oliver Bredtmann, Maximilian Otten, Jan-Philip Richter, Thilo Bauer, David Zibriczky

Abstract: This paper presents an approach for tracking in a surveillance scenario. Typical aspects for this scenario are a 24/7 operation with a static camera mounted above the height of a human with many objects or people. The Multiple Object Tracking Benchmark 20 (MOT20) reflects this scenario best. We can show that our approach is real-time capable on this benchmark and outperforms all other real-time ca… ▽ More This paper presents an approach for tracking in a surveillance scenario. Typical aspects for this scenario are a 24/7 operation with a static camera mounted above the height of a human with many objects or people. The Multiple Object Tracking Benchmark 20 (MOT20) reflects this scenario best. We can show that our approach is real-time capable on this benchmark and outperforms all other real-time capable approaches in HOTA, MOTA, and IDF1. We achieve this by contributing a fast Siamese network reformulated for linear runtime (instead of quadratic) to generate fingerprints from detections. Thus, it is possible to associate the detections to Kalman filters based on multiple tracking specific ratings: Cosine similarity of fingerprints, Intersection over Union, and pixel distance ratio in the image. △ Less

Submitted 2 June, 2021; originally announced June 2021.

Benchmarking near-term quantum computers via random circuit sampling

Authors: Yunchao Liu, Matthew Otten, Roozbeh Bassirianjahromi, Liang Jiang, Bill Fefferman

Abstract: The increasing scale of near-term quantum hardware motivates the need for efficient noise characterization methods, since qubit and gate level techniques cannot capture crosstalk and correlated noise in many qubit systems. While scalable approaches, such as cycle benchmarking, are known for special classes of quantum circuits, the characterization of noise in general circuits with non-Clifford gat… ▽ More The increasing scale of near-term quantum hardware motivates the need for efficient noise characterization methods, since qubit and gate level techniques cannot capture crosstalk and correlated noise in many qubit systems. While scalable approaches, such as cycle benchmarking, are known for special classes of quantum circuits, the characterization of noise in general circuits with non-Clifford gates has been an unreachable task. We develop an algorithm that can sample-efficiently estimate the total amount of noise induced by a layer of arbitrary non-Clifford gates, including all crosstalks, and experimentally demonstrate the method on IBM Quantum hardware. Our algorithm is inspired by Google's quantum supremacy experiment and is based on random circuit sampling. In their paper, Google observed that their experimental linear cross entropy was consistent with a simple uncorrelated noise model, and claimed this coincidence indicated that the noise in their device was uncorrelated -- a key step in hardware development towards fault tolerance. As an application, we show that our result provides formal evidence to support such a conclusion. △ Less

Submitted 19 April, 2022; v1 submitted 11 May, 2021; originally announced May 2021.

Comments: 43 pages, 15 figures; presentation updated, results unchanged

Impacts of Noise and Structure on Quantum Information Encoded in a Quantum Memory

Authors: Matthew Otten, Keshav Kapoor, A. Barış Özgüler, Eric T. Holland, James B. Kowalkowski, Yuri Alexeev, Adam L. Lyon

Abstract: As larger, higher-quality quantum devices are built and demonstrated in quantum information applications, such as quantum computation and quantum communication, the need for high-quality quantum memories to store quantum states becomes ever more pressing. Future quantum devices likely will use a variety of physical hardware, some being used primarily for processing of quantum information and other… ▽ More As larger, higher-quality quantum devices are built and demonstrated in quantum information applications, such as quantum computation and quantum communication, the need for high-quality quantum memories to store quantum states becomes ever more pressing. Future quantum devices likely will use a variety of physical hardware, some being used primarily for processing of quantum information and others for storage. Here, we study the correlation of the structure of quantum information with physical noise models of various possible quantum memory implementations. Through numerical simulation of different noise models and approximate analytical formulas applied to a variety of interesting quantum states, we provide comparisons between quantum hardware with different structure, including both qubit- and qudit-based quantum memories. Our findings point to simple, experimentally relevant formulas for the relative lifetimes of quantum information in different quantum memories and have relevance to the design of hybrid quantum devices. △ Less

Submitted 8 July, 2021; v1 submitted 26 November, 2020; originally announced November 2020.

Comments: 12 pages, 7 figures

Report number: FERMILAB-PUB-20-615-QIS-SCD

Journal ref: Phys. Rev. A 104, 012605 (2021)

Ab Initio Molecular Dynamics on Quantum Computers

Authors: Dmitry A. Fedorov, Matthew J. Otten, Stephen K. Gray, Yuri Alexeev

Abstract: Ab initio molecular dynamics (AIMD) is a valuable technique for studying molecules and materials at finite temperatures where the nuclei evolve on potential energy surfaces obtained from accurate electronic structure calculations. In this work, a quantum computer-based AIMD method is presented. The electronic energies are calculated on a quantum computer using the variational quantum eigensolver (… ▽ More Ab initio molecular dynamics (AIMD) is a valuable technique for studying molecules and materials at finite temperatures where the nuclei evolve on potential energy surfaces obtained from accurate electronic structure calculations. In this work, a quantum computer-based AIMD method is presented. The electronic energies are calculated on a quantum computer using the variational quantum eigensolver (VQE) method. We compute the energy gradients numerically using the Hellmann-Feynman theorem, finite differences, and a correlated sampling technique. Our method only requires additional classical calculations of electron integrals for each degree of freedom, without any additional computations on a quantum computer beyond the initial VQE run. To achieve comparable accuracy, our gradient calculation method requires three to five orders of magnitude fewer measurements than other brute force methods without correlated sampling. As a proof of concept, AIMD dynamics simulations are demonstrated for the H2 molecule on IBM quantum devices. To the best of our knowledge, it is the first successful attempt to run AIMD on quantum devices for a chemical system. In addition, we demonstrate the validity of the method for larger molecules using full configuration interaction (FCI) wave functions. As quantum hardware and noise mitigation techniques continue to improve, the method can be utilized for studying larger molecular and material systems. △ Less

Submitted 7 April, 2021; v1 submitted 14 August, 2020; originally announced August 2020.

Quantum Machine Learning using Gaussian Processes with Performant Quantum Kernels

Authors: Matthew Otten, Imène R. Goumiri, Benjamin W. Priest, George F. Chapline, Michael D. Schneider

Abstract: Quantum computers have the opportunity to be transformative for a variety of computational tasks. Recently, there have been proposals to use the unsimulatably of large quantum devices to perform regression, classification, and other machine learning tasks with quantum advantage by using kernel methods. While unsimulatably is a necessary condition for quantum advantage in machine learning, it is no… ▽ More Quantum computers have the opportunity to be transformative for a variety of computational tasks. Recently, there have been proposals to use the unsimulatably of large quantum devices to perform regression, classification, and other machine learning tasks with quantum advantage by using kernel methods. While unsimulatably is a necessary condition for quantum advantage in machine learning, it is not sufficient, as not all kernels are equally effective. Here, we study the use of quantum computers to perform the machine learning tasks of one- and multi-dimensional regression, as well as reinforcement learning, using Gaussian Processes. By using approximations of performant classical kernels enhanced with extra quantum resources, we demonstrate that quantum devices, both in simulation and on hardware, can perform machine learning tasks at least as well as, and many times better than, the classical inspiration. Our informed kernel design demonstrates a path towards effectively utilizing quantum devices for machine learning tasks. △ Less

Submitted 23 April, 2020; originally announced April 2020.

Accurate and efficient description of interacting carriers in quantum nanostructures by selected configuration interaction and perturbation theory

Authors: Moritz Cygorek, Matthew Otten, Marek Korkusinski, Pawel Hawrylak

Abstract: We present a method to calculate many-body states of interacting carriers in million atom quantum nanostructures based on atomistic tight-binding calculations and a combination of iterative selection of configurations and perturbation theory. This method enables investigations of large excitonic complexes and multi-electron systems with near full configuration interaction accuracy, even though onl… ▽ More We present a method to calculate many-body states of interacting carriers in million atom quantum nanostructures based on atomistic tight-binding calculations and a combination of iterative selection of configurations and perturbation theory. This method enables investigations of large excitonic complexes and multi-electron systems with near full configuration interaction accuracy, even though only a small subspace of the full many-body Hilbert space is sampled, thus saving orders of magnitudes in computational resources. Important advantages of this method are that the convergence is controlled by a single parameter, the threshold, and that ground and excited states can be treated on an equal footing. We demonstrate the extreme efficiency of the method by numerical studies of complexes composed of up to 13 excitons, which requires filling of states up to the fourth electronic shell. We find that the method generally converges fast as a function of the threshold, profiting from a significant enhancement due to the perturbative corrections. The role of the choice of single-particle basis states is discussed. It is found that the algorithm converges faster in the Hartree-Fock basis only for highly charged systems, where Coulomb repulsion dominates. Finally, based on the observation that second order perturbative energy corrections only depend on off-diagonal elements of the many-body Hamiltonian, we present a way to accurately calculate many-body states that requires only a relatively small number of Coulomb matrix elements. △ Less

Submitted 8 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. B 101, 205308 (2020)

A C Code Generator for Fast Inference and Simple Deployment of Convolutional Neural Networks on Resource Constrained Systems

Authors: Oliver Urbann, Simon Camphausen, Arne Moos, Ingmar Schwarz, Sören Kerner, Maximilian Otten

Abstract: Inference of Convolutional Neural Networks in time critical applications usually requires a GPU. In robotics or embedded devices these are often not available due to energy, space and cost constraints. Furthermore, installation of a deep learning framework or even a native compiler on the target platform is not possible. This paper presents a neural network code generator (NNCG) that generates fro… ▽ More Inference of Convolutional Neural Networks in time critical applications usually requires a GPU. In robotics or embedded devices these are often not available due to energy, space and cost constraints. Furthermore, installation of a deep learning framework or even a native compiler on the target platform is not possible. This paper presents a neural network code generator (NNCG) that generates from a trained CNN a plain ANSI C code file that encapsulates the inference in single a function. It can easily be included in existing projects and due to lack of dependencies, cross compilation is usually possible. Additionally, the code generation is optimized based on the known trained CNN and target platform following four design principles. The system is evaluated utilizing small CNN designed for this application. Compared to TensorFlow XLA and Glow speed-ups of up to 11.81 can be shown and even GPUs are outperformed regarding latency. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Ground-state cooling enabled by critical coupling and dark entangled states

Authors: Cristian L. Cortes, Matthew Otten, Stephen K. Gray

Abstract: We analyze the cooling of a mechanical resonator coupled to an ensemble of interacting two-level systems via an open quantum systems approach. Using an exact analytical result, we find optimal cooling occurs when the phonon mode is critically coupled ($γ\sim g$) to the two-level system ensemble. Typical systems operate in sub-optimal cooling regimes due to the intrinsic parameter mismatch (… ▽ More We analyze the cooling of a mechanical resonator coupled to an ensemble of interacting two-level systems via an open quantum systems approach. Using an exact analytical result, we find optimal cooling occurs when the phonon mode is critically coupled ($γ\sim g$) to the two-level system ensemble. Typical systems operate in sub-optimal cooling regimes due to the intrinsic parameter mismatch ($γ\gg g$) between the dissipative decay rate $γ$ and the coupling factor $g$. To overcome this obstacle, we show that carefully engineering the coupling parameters through the strain profile of the mechanical resonator allows phonon cooling to proceed through the dark (subradiant) entangled states of an \emph{interacting} ensemble, thereby resulting in optimal phonon cooling. Our results provide a new avenue for ground-state cooling and should be accessible for experimental demonstrations. △ Less

Submitted 5 January, 2020; originally announced January 2020.

Comments: 11 pages, 4 figures

Journal ref: Phys. Rev. B 99, 014107 (2019)

Coherent photon coincidence spectroscopy of single quantum systems

Authors: Matthew Otten, Tristan Kenneweg, Matthias Hensen, Stephen K. Gray, Walter Pfeiffer

Abstract: Non-equilibrium photon correlations of coherently excited single quantum systems can reveal their internal quantum dynamics and provide spectroscopic access. Here we propose and discuss the fundamentals of a coherent photon coincidence spectroscopy based on the application of laser pulses with variable delay and the detection of an time-averaged two-photon coincidence rate. For demonstration, two… ▽ More Non-equilibrium photon correlations of coherently excited single quantum systems can reveal their internal quantum dynamics and provide spectroscopic access. Here we propose and discuss the fundamentals of a coherent photon coincidence spectroscopy based on the application of laser pulses with variable delay and the detection of an time-averaged two-photon coincidence rate. For demonstration, two simple but important cases, i.e., an exciton - biexciton in a quantum dot and two coupled quantum emitters, are investigated based on quantum dynamics simulations demonstrating that this nonlinear spectroscopy reveals information specific to the particular single quantum system. △ Less

Submitted 3 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. A 102, 043118 (2020)

Non-Hermitian approach for quantum plasmonics

Authors: Cristian L. Cortes, Matthew Otten, Stephen K. Gray

Abstract: We examine the limits of applicability of a simple non-Hermitian model for exciton/plasmon interactions in the presence of dissipation and dephasing. The model can be used as an alternative to the more complete Lindblad density matrix approach and is computationally and conceptually simpler. We find that optical spectra in the linear regime can be adequately described by this approach. The model c… ▽ More We examine the limits of applicability of a simple non-Hermitian model for exciton/plasmon interactions in the presence of dissipation and dephasing. The model can be used as an alternative to the more complete Lindblad density matrix approach and is computationally and conceptually simpler. We find that optical spectra in the linear regime can be adequately described by this approach. The model can fail, however, under continuous optical driving in some circumstances. In the case of two quantum dots or excitons interacting with a plasmon, the model can also describe coherences and entanglement qualitatively when both dissipation and dephasing are present, and quantitatively in the limit with no dephasing. The model can also be extended to the case of many quantum dots interacting with a plasmon and results, within the single-excitation manifold, are presented for the fifty quantum dot case. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Noise-Resilient Quantum Dynamics Using Symmetry-Preserving Ansatzes

Authors: Matthew Otten, Cristian L. Cortes, Stephen K. Gray

Abstract: We describe and demonstrate a method for the computation of quantum dynamics on small, noisy universal quantum computers. This method relies on the idea of `restarting' the dynamics; at least one approximate time step is taken on the quantum computer and then a parameterized quantum circuit ansatz is optimized to produce a state that well approximates the time-stepped results. The simulation is th… ▽ More We describe and demonstrate a method for the computation of quantum dynamics on small, noisy universal quantum computers. This method relies on the idea of `restarting' the dynamics; at least one approximate time step is taken on the quantum computer and then a parameterized quantum circuit ansatz is optimized to produce a state that well approximates the time-stepped results. The simulation is then restarted from the optimized state. By encoding knowledge of the form of the solution in the ansatz, such as ensuring that the ansatz has the appropriate symmetries of the Hamiltonian, the optimized ansatz can recover from the effects of decoherence. This allows for the quantum dynamics to proceed far beyond the standard gate depth limits of the underlying hardware, albeit incurring some error from the optimization, the quality of the ansatz, and the typical time step error. We demonstrate this methods on the Aubry-André model with interactions at half-filling, which shows interesting many-body localization effects in the long time limit. Our method is capable of performing high-fidelity Hamiltonian simulation hundred of time steps longer than the standard Trotter approach. These results demonstrate a path towards using small, lossy devices to calculate quantum dynamics. △ Less

Submitted 14 October, 2019; originally announced October 2019.

Accurate many-body electronic structure near the basis set limit: application to the chromium dimer

Authors: Junhao Li, Yuan Yao, Adam A. Holmes, Matthew Otten, Qiming Sun, Sandeep Sharma, C. J. Umrigar

Abstract: We describe a method for computing near-exact energies for correlated systems with large Hilbert spaces. The method efficiently identifies the most important basis states (Slater determinants) and performs a variational calculation in the subspace spanned by these determinants. A semistochastic approach is then used to add a perturbative correction to the variational energy to compute the total en… ▽ More We describe a method for computing near-exact energies for correlated systems with large Hilbert spaces. The method efficiently identifies the most important basis states (Slater determinants) and performs a variational calculation in the subspace spanned by these determinants. A semistochastic approach is then used to add a perturbative correction to the variational energy to compute the total energy. The size of the variational space is progressively increased until the total energy converges to within the desired tolerance. We demonstrate the power of the method by computing a near-exact potential energy curve (PEC) for a very challenging molecule -- the chromium dimer. △ Less

Submitted 15 January, 2020; v1 submitted 24 September, 2019; originally announced September 2019.

Comments: 4 figures

Journal ref: Phys. Rev. Research 2, 012015 (2020)

Quantum optics of single electrons in quantum liquid and solid helium-4

Authors: Matthew Otten, Xianjing Zhou, Xufeng Zhang, Dafei Jin

Abstract: Single electrons can be conceived as the simplest quantum nodes in a quantum network. Between electrons, single photons can act as quantum channels to exchange quantum information. Despite this appealing picture, in conventional materials, it is extremely difficult to make individual electrons and photons coherently interact with each other at the visible-infrared wavelengths suitable for long-dis… ▽ More Single electrons can be conceived as the simplest quantum nodes in a quantum network. Between electrons, single photons can act as quantum channels to exchange quantum information. Despite this appealing picture, in conventional materials, it is extremely difficult to make individual electrons and photons coherently interact with each other at the visible-infrared wavelengths suitable for long-distance communication. Here we theoretically demonstrate that the self-confined single-electron structure in condensed helium-4 can be a fascinating candidate for single-electron quantum nodes. Each electron in helium forms a bubble of 1 to 2 nm radius and coherently interacts with mid-infrared photons. A parametrically amplified femtosecond laser can drive the electrons into any superposition between the ground and excited states. An electron inside a slot-waveguide cavity can strongly couple with cavity photons and exhibits vacuum Rabi oscillations. Two electrons in the cavity naturally generate entanglement through their respective coupling to the lossy cavity. The electron-in-helium system offers unique insight in understanding nonequilibrium quantum dynamics. △ Less

Submitted 25 June, 2019; v1 submitted 7 May, 2019; originally announced May 2019.

Comments: 9 pages, 6 figures

Opportunities for Nuclear Physics & Quantum Information Science

Authors: Ian C. Cloët, Matthew R. Dietrich, John Arrington, Alexei Bazavov, Michael Bishof, Adam Freese, Alexey V. Gorshkov, Anna Grassellino, Kawtar Hafidi, Zubin Jacob, Michael McGuigan, Yannick Meurice, Zein-Eddine Meziani, Peter Mueller, Christine Muschik, James Osborn, Matthew Otten, Peter Petreczky, Tomas Polakovic, Alan Poon, Raphael Pooser, Alessandro Roggero, Mark Saffman, Brent VanDevender, Jiehang Zhang , et al. (1 additional authors not shown)

Abstract: This whitepaper is an outcome of the workshop Intersections between Nuclear Physics and Quantum Information held at Argonne National Laboratory on 28-30 March 2018 [www.phy.anl.gov/npqi2018/]. The workshop brought together 116 national and international experts in nuclear physics and quantum information science to explore opportunities for the two fields to collaborate on topics of interest to the… ▽ More This whitepaper is an outcome of the workshop Intersections between Nuclear Physics and Quantum Information held at Argonne National Laboratory on 28-30 March 2018 [www.phy.anl.gov/npqi2018/]. The workshop brought together 116 national and international experts in nuclear physics and quantum information science to explore opportunities for the two fields to collaborate on topics of interest to the U.S. Department of Energy (DOE) Office of Science, Office of Nuclear Physics, and more broadly to U.S. society and industry. The workshop consisted of 22 invited and 10 contributed talks, as well as three panel discussion sessions. Topics discussed included quantum computation, quantum simulation, quantum sensing, nuclear physics detectors, nuclear many-body problem, entanglement at collider energies, and lattice gauge theories. △ Less

Submitted 30 July, 2019; v1 submitted 13 March, 2019; originally announced March 2019.

Comments: 22 pages, Outcome of the workshop: Intersections between Nuclear Physics and Quantum Information

Bayesian Searches and Quantum Oscillators

Authors: G. Chapline, M. Otten

Abstract: A new LLNL Strategic Initiative is focused on developing improved methods for Bayesian inference when the input data depends on hidden parameters. Part of this effort involves investigating the idea of using an array of quantum oscillators (viz microwave cavities) as an analog computer for implementing Bayesian model selection. The practical motivations are twofold: 1) Bayesian model selection pro… ▽ More A new LLNL Strategic Initiative is focused on developing improved methods for Bayesian inference when the input data depends on hidden parameters. Part of this effort involves investigating the idea of using an array of quantum oscillators (viz microwave cavities) as an analog computer for implementing Bayesian model selection. The practical motivations are twofold: 1) Bayesian model selection problems are often intractable using conventional digital computers, and 2) quantum information processing may allow detection of weak analog signals below the usual quantum noise threshold. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 8 pages, 2 figures

Report number: LLNL-CONF-764010

Optical Detection and Storage of Entanglement in Plasmonically Coupled Quantum Dot Qubits

Authors: M. Otten, S. K. Gray, G. V. Kolmakov

Abstract: Recent proposals and advances in quantum simulations, quantum cryptography and quantum communications substantially rely on quantum entanglement formation. Contrary to the conventional wisdom that dissipation destroys quantum coherence, coupling with a dissipative environment can also generate entanglement. We consider a system composed of two quantum dot qubits coupled with a common, damped surfa… ▽ More Recent proposals and advances in quantum simulations, quantum cryptography and quantum communications substantially rely on quantum entanglement formation. Contrary to the conventional wisdom that dissipation destroys quantum coherence, coupling with a dissipative environment can also generate entanglement. We consider a system composed of two quantum dot qubits coupled with a common, damped surface plasmon mode; each quantum dot is also coupled to a separate photonic cavity mode. Cavity quantum electrodynamics calculations show that upon optical excitation by a femtosecond laser pulse, entanglement of the quantum dot excitons occurs, and the time evolution of the $g^{(2)}$ pair correlation function of the cavity photons is an indicator of the entanglement. We also show that the degree of entanglement is conserved during the time evolution of the system. Furthermore, if coupling of the photonic cavity and quantum dot modes is large enough, the quantum dot entanglement can be transferred to the cavity modes to increase the overall entanglement lifetime. This latter phenomenon can be viewed as a signature of entangled, long-lived quantum dot exciton-polariton formation. The preservation of total entanglement in the strong coupling limit of the cavity/quantum dot interactions suggests a novel means of entanglement storage and manipulation in high-quality optical cavities. △ Less

Submitted 29 November, 2018; originally announced November 2018.

Comments: 26 pages, 7 figures

Journal ref: Phys. Rev. A 99, 032339 (2019)

Fast Semistochastic Heat-Bath Configuration Interaction

Authors: Junhao Li, Matt Otten, Adam A Holmes, Sandeep Sharma, Cyrus J. Umrigar

Abstract: This paper presents in detail our fast semistochastic heat-bath configuration interaction (SHCI) method for solving the many-body Schrodinger equation. We identify and eliminate computational bottlenecks in both the variational and perturbative steps of the SHCI algorithm. We also describe the parallelization and the key data structures in our implementation, such as the distributed hash table. Th… ▽ More This paper presents in detail our fast semistochastic heat-bath configuration interaction (SHCI) method for solving the many-body Schrodinger equation. We identify and eliminate computational bottlenecks in both the variational and perturbative steps of the SHCI algorithm. We also describe the parallelization and the key data structures in our implementation, such as the distributed hash table. The improved SHCI algorithm enables us to include in our variational wavefunction two orders of magnitude more determinants than has been reported previously with other selected configuration interaction methods. We use our algorithm to calculate an accurate benchmark energy for the chromium dimer with the X2C relativistic Hamiltonian in the cc-pVDZ-DK basis, correlating 28 electrons in 76 spatial orbitals. Our largest calculation uses two billion Slater determinants in the variational space, and semistochastically includes perturbative contributions from at least trillions of additional determinants with better than 10 microhartree statistical uncertainty. △ Less

Submitted 10 December, 2018; v1 submitted 12 September, 2018; originally announced September 2018.

Journal ref: J. Chem. Phys., 149, 214110 (2018)

Recovering noise-free quantum observables

Authors: Matthew Otten, Stephen Gray

Abstract: We introduce a technique for recovering noise-free observables in noisy quantum systems by combining the results of many slightly different experiments. Our approach is applicable to a variety of quantum systems but we illustrate it with applications to quantum computing and quantum sensing. The approach corresponds to repeating the same quantum evolution many times with known variations on the un… ▽ More We introduce a technique for recovering noise-free observables in noisy quantum systems by combining the results of many slightly different experiments. Our approach is applicable to a variety of quantum systems but we illustrate it with applications to quantum computing and quantum sensing. The approach corresponds to repeating the same quantum evolution many times with known variations on the underlying systems' error properties, e.g. the spontaneous emission and dephasing times, $T_1$ and $T_2$. As opposed to standard quantum error correction methods, which have an overhead in the number of qubits (many physical qubits must be added for each logical qubit) our method has only an overhead in number of evaluations, allowing the overhead to, in principle, be hidden via parallelization. We show that the effective spontaneous emission, $T_1$, and dephasing, $T_2$, times can be increased using this method in both simulation and experiments on an actual quantum computer. We also show how to correct more complicated entangled states and how Ramsey fringes relevant to quantum sensing can be significantly extended in time. △ Less

Submitted 20 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. A 99, 012338 (2019)

Accounting for Errors in Quantum Algorithms via Individual Error Reduction

Authors: Matthew Otten, Stephen Gray

Abstract: We discuss a surprisingly simple scheme for accounting (and removal) of error in observables determined from quantum algorithms. A correction to the value of the observable is calculated by first measuring the observable with all error sources active and subsequently measuring the observable with each error source removed separately. We apply this scheme to the variational quantum eigensolver, sim… ▽ More We discuss a surprisingly simple scheme for accounting (and removal) of error in observables determined from quantum algorithms. A correction to the value of the observable is calculated by first measuring the observable with all error sources active and subsequently measuring the observable with each error source removed separately. We apply this scheme to the variational quantum eigensolver, simulating the calculation of the ground state energy of equilibrium H$_2$ and LiH in the presence of several noise sources, including amplitude damping, dephasing, thermal noise, and correlated noise. We show that this scheme provides a decrease in the needed quality of the qubits by up to two orders of magnitude. In near-term quantum computers, where full fault-tolerant error correction is too expensive, this scheme provides a route to significantly more accurate calculation △ Less

Submitted 18 April, 2018; originally announced April 2018.

Excited States of Methylene, Polyenes, and Ozone from Heat-Bath Configuration Interaction

Authors: Alan D. Chien, Adam A. Holmes, Matthew Otten, Cyrus J. Umrigar, Sandeep Sharma, Paul M. Zimmerman

Abstract: The electronically excited states of methylene (CH$_2$), ethylene (C$_2$H$_4$), butadiene (C$_4$H$_6$), hexatriene (C$_6$H$_8$), and ozone (O$_3$) have long proven challenging due to their complex mixtures of static and dynamic correlations. Semistochastic heat-bath configuration interaction (SHCI), which efficiently and systematically approaches the full configuration interaction (FCI) limit, is… ▽ More The electronically excited states of methylene (CH$_2$), ethylene (C$_2$H$_4$), butadiene (C$_4$H$_6$), hexatriene (C$_6$H$_8$), and ozone (O$_3$) have long proven challenging due to their complex mixtures of static and dynamic correlations. Semistochastic heat-bath configuration interaction (SHCI), which efficiently and systematically approaches the full configuration interaction (FCI) limit, is used to provide close approximations to the FCI energies in these systems. This article presents the largest FCI-level calculation to date -- on hexatriene using a polarized double-zeta basis (ANO-L-pVDZ), which gives rise to a Hilbert space containing more than $10^{38}$ determinants. These calculations give vertical excitation energies of 5.58 and 5.59 eV respectively for the $2^1{\rm A}_{\rm g}$ and $1^1{\rm B}_{\rm u}$ states, showing that they are nearly degenerate. The same excitation energies in butadiene/ANO-L-pVDZ were found to be 6.58 and 6.45 eV. In addition to these benchmarks, our calculations strongly support the presence of a previously hypothesized ring-minimum species of ozone that lies 1.3 eV higher than the open-ring minimum energy structure and is separated from it by a barrier of 1.11 eV. △ Less

Submitted 15 March, 2018; originally announced March 2018.

Electrically driven quantum light emission in electromechanically-tuneable photonic crystal cavities

Authors: M. Petruzzella, F. M. Pagliano, Z. Zobenica, S. Birindelli, M. Cotrufo, F. W. M van Otten, R. W. van der Heijden, A. Fiore

Abstract: A single quantum dot deterministically coupled to a photonic crystal environment constitutes an indispensable elementary unit to both generate and manipulate single-photons in next-generation quantum photonic circuits. To date, the scaling of the number of these quantum nodes on a fully-integrated chip has been prevented by the use of optical pumping strategies that require a bulky off-chip laser… ▽ More A single quantum dot deterministically coupled to a photonic crystal environment constitutes an indispensable elementary unit to both generate and manipulate single-photons in next-generation quantum photonic circuits. To date, the scaling of the number of these quantum nodes on a fully-integrated chip has been prevented by the use of optical pumping strategies that require a bulky off-chip laser along with the lack of methods to control the energies of nano-cavities and emitters. Here, we concurrently overcome these limitations by demonstrating electrical injection of single excitonic lines within a nano-electro-mechanically tuneable photonic crystal cavity. When an electrically-driven dot line is brought into resonance with a photonic crystal mode, its emission rate is enhanced. Anti-bunching experiments reveal the quantum nature of these on-demand sources emitting in the telecom range. These results represent an important step forward in the realization of integrated quantum optics experiments featuring multiple electrically-triggered Purcell-enhanced single-photon sources embedded in a reconfigurable semiconductor architecture. △ Less

Submitted 8 October, 2017; v1 submitted 18 June, 2017; originally announced June 2017.

Time-dependent linear-response variational Monte Carlo

Authors: Bastien Mussard, Emanuele Coccia, Roland Assaraf, Matt Otten, C. J. Umrigar, Julien Toulouse

Abstract: We present the extension of variational Monte Carlo (VMC) to the calculation of electronic excitation energies and oscillator strengths using time-dependent linear-response theory. By exploiting the analogy existing between the linear method for wave-function optimisation and the generalised eigenvalue equation of linear-response theory, we formulate the equations of linear-response VMC (LR-VMC).… ▽ More We present the extension of variational Monte Carlo (VMC) to the calculation of electronic excitation energies and oscillator strengths using time-dependent linear-response theory. By exploiting the analogy existing between the linear method for wave-function optimisation and the generalised eigenvalue equation of linear-response theory, we formulate the equations of linear-response VMC (LR-VMC). This LR-VMC approach involves the first-and second-order derivatives of the wave function with respect to the parameters. We perform first tests of the LR-VMC method within the Tamm-Dancoff approximation using single-determinant Jastrow-Slater wave functions with different Slater basis sets on some singlet and triplet excitations of the beryllium atom. Comparison with reference experimental data and with configuration-interaction-singles (CIS) results shows that LR-VMC generally outperforms CIS for excitation energies and is thus a promising approach for calculating electronic excited-state properties of atoms and molecules. △ Less

Submitted 27 May, 2017; originally announced May 2017.

Comments: Advances in Quantum Chemistry, 2017, Novel Electronic Structure Theory: General Innovations and Strongly Correlated Systems

Origins and optimization of entanglement in plasmonically coupled quantum dots

Authors: Matthew Otten, Jeffrey Larson, Misun Min, Stefan M. Wild, Matthew Pelton, Stephen Gray

Abstract: A system of two or more quantum dots interacting with a dissipative plasmonic nanostructure is investigated in detail by using a cavity quantum electrodynamics approach with a model Hamiltonian. We focus on determining and understanding system configurations that generate multiple bipartite quantum entanglements between the occupation states of the quantum dots. These configurations include allowi… ▽ More A system of two or more quantum dots interacting with a dissipative plasmonic nanostructure is investigated in detail by using a cavity quantum electrodynamics approach with a model Hamiltonian. We focus on determining and understanding system configurations that generate multiple bipartite quantum entanglements between the occupation states of the quantum dots. These configurations include allowing for the quantum dots to be asymmetrically coupled to the plasmonic system. Analytical solution of a simplified limit for an arbitrary number of quantum dots and numerical simulations and optimization for the two- and three-dot cases are used to develop guidelines for maximizing the bipartite entanglements. For any number of quantum dots, we show that through simple starting states and parameter guidelines, one quantum dot can be made to share a strong amount of bipartite entanglement with all other quantum dots in the system, while entangling all other pairs to a lesser degree. △ Less

Submitted 13 June, 2016; originally announced June 2016.

Comments: 34 pages, 7 figures

Cooling a Mechanical Resonator with a Nitrogen-Vacancy Center Ensemble Using a Room Temperature Excited State Spin-Strain Interaction

Authors: E. R. MacQuarrie, M. Otten, S. K. Gray, G. D. Fuchs

Abstract: We propose a protocol to dissipatively cool a room temperature mechanical resonator using a nitrogen-vacancy (NV) center ensemble. The spin ensemble is coupled to the resonator through its orbitally-averaged excited state, which has a spin-strain interaction that has not been previously characterized. We experimentally demonstrate that the spin-strain coupling in the excited state is $13.5\pm0.5$… ▽ More We propose a protocol to dissipatively cool a room temperature mechanical resonator using a nitrogen-vacancy (NV) center ensemble. The spin ensemble is coupled to the resonator through its orbitally-averaged excited state, which has a spin-strain interaction that has not been previously characterized. We experimentally demonstrate that the spin-strain coupling in the excited state is $13.5\pm0.5$ times stronger than the ground state spin-strain coupling. We then theoretically show that this interaction combined with a high-density spin ensemble enables the cooling of a mechanical resonator from room temperature to a fraction of its thermal phonon occupancy. △ Less

Submitted 23 June, 2016; v1 submitted 23 May, 2016; originally announced May 2016.

Comments: Main text is 11 pages in preprint formatting, with 4 figures. Also included is 17 pages of supporting information including 7 supporting figures

Spontaneous emission control of single quantum dots by electromechanical tuning of a photonic crystal cavity

Authors: L. Midolo, F. Pagliano, T. B. Hoang, T. Xia, F. W. M. van Otten, L. H. Li, E. Linfield, M. Lermer, S. Höfling, A. Fiore

Abstract: We demonstrate the control of the spontaneous emission rate of single InAs quantum dots embedded in a double-membrane photonic crystal cavity by the electromechanical tuning of the cavity resonance. Controlling the separation between the two membranes with an electrostatic field we obtain the real-time spectral alignment of the cavity mode to the excitonic line and we observe an enhancement of the… ▽ More We demonstrate the control of the spontaneous emission rate of single InAs quantum dots embedded in a double-membrane photonic crystal cavity by the electromechanical tuning of the cavity resonance. Controlling the separation between the two membranes with an electrostatic field we obtain the real-time spectral alignment of the cavity mode to the excitonic line and we observe an enhancement of the spontaneous emission rate at resonance. The cavity has been tuned over 13 nm without shifting the exciton energies. A spontaneous emission enhancement of 4.5 has been achieved with a coupling efficiency of the dot to the mode 92%. △ Less

Submitted 12 July, 2012; originally announced July 2012.

Comments: 4 pages, 3 figures

Electromechanical tuning of vertically-coupled photonic crystal nanobeams

Authors: L. Midolo, S. N. Yoon, F. Pagliano, T. Xia, F. W. M. van Otten, M. Lermer, S. Höfling, A. Fiore

Abstract: We present the design, the fabrication and the characterization of a tunable one-dimensional (1D) photonic crystal cavity (PCC) etched on two vertically-coupled GaAs nanobeams. A novel fabrication method which prevents their adhesion under capillary forces is introduced. We discuss a design to increase the flexibility of the structure and we demonstrate a large reversible and controllable electrom… ▽ More We present the design, the fabrication and the characterization of a tunable one-dimensional (1D) photonic crystal cavity (PCC) etched on two vertically-coupled GaAs nanobeams. A novel fabrication method which prevents their adhesion under capillary forces is introduced. We discuss a design to increase the flexibility of the structure and we demonstrate a large reversible and controllable electromechanical wavelength tuning (> 15 nm) of the cavity modes. △ Less

Submitted 26 June, 2012; originally announced June 2012.

Comments: 11 pages, 4 figures