-
Catalyst-mediated etching of carbon nanotubes exhibiting electronic-structure insensitivity and reciprocal kinetics with growth
Authors:
K. Otsuka,
S. Maruyama
Abstract:
The selective etching of carbon nanotubes has been widely explored as a post-synthetic route for enriching semiconducting species. As nanoelectronic applications increasingly demand pure semiconducting nanotubes for use in field-effect transistors and other optoelectronic devices, understanding the mechanistic basis of selective removal becomes critical. While etching selectivity is often attribut…
▽ More
The selective etching of carbon nanotubes has been widely explored as a post-synthetic route for enriching semiconducting species. As nanoelectronic applications increasingly demand pure semiconducting nanotubes for use in field-effect transistors and other optoelectronic devices, understanding the mechanistic basis of selective removal becomes critical. While etching selectivity is often attributed to electronic structure effects on tube walls, its relevance in the presence of catalyst nanoparticles remains unclear. Here, we directly quantify the catalyst-mediated etching and growth rates of individual single-walled carbon nanotubes using elaborate isotope labeling methods. Surprisingly, in water vapor and methanol environments, catalytic etching proceeds with negligible dependence on tube electronic type, in sharp contrast to non-catalytic oxidation pathways. In-situ Raman analysis upon heating on nanotube ensembles also confirms metallicity-insensitive etching under catalytic conditions, whereas sidewall oxidation without catalysts exhibits pronounced selectivity. Our growth kinetic model, which precisely describes the kinetics of catalytic etching process, motivates kinetic Monte Carlo simulations of nanotube edge dynamics, revealing the reciprocal nature of edge configuration during growth and etching. These findings highlight a fundamental mechanistic distinction between catalytic and non-catalytic reactivity and thus propose that catalytic etching may serve as a diagnostic mirror of growth behavior when using pre-sorted carbon nanotube samples.
△ Less
Submitted 27 April, 2025;
originally announced April 2025.
-
Harmonics-assisted optical phase amplification with a self-mixing thin-slice Nd:GdVO4 laser operating in the self-induced skew cosh Gaussian mode
Authors:
Kenju Otsuka,
Seiichi Sudo
Abstract:
Harmonic-assisted phase amplification was achieved in a 300-micrometer-thick Nd:GdVO4 laser in the self-mixing interference scheme. The key event is the self-induced skew cosh Gaussian (e.g., skew-chG) mode oscillation in a thin-slice solid-state laser with wide-aperture laser-diode pumping. The skew-chG mode was proved to be formed by the phase-locking of nearly frequency-degenerate TEM00 and ann…
▽ More
Harmonic-assisted phase amplification was achieved in a 300-micrometer-thick Nd:GdVO4 laser in the self-mixing interference scheme. The key event is the self-induced skew cosh Gaussian (e.g., skew-chG) mode oscillation in a thin-slice solid-state laser with wide-aperture laser-diode pumping. The skew-chG mode was proved to be formed by the phase-locking of nearly frequency-degenerate TEM00 and annular fields. The resultant modal-interference-induced gain modulation at the beat frequency between the two modal fields, which is far above the relaxation oscillation frequency, increased experimental self-mixing modulation bandwidth accordingly. Fifty-fold phase amplification was achieved in a strong optical feedback regime.
△ Less
Submitted 18 February, 2025;
originally announced February 2025.
-
A Machine-Learning Bond-Order Potential for Exploring the Configuration Space of Carbon
Authors:
Ikuma Kohata,
Kaoru Hisama,
Keigo Otsuka,
Shigeo Maruyama
Abstract:
Construction of transferable machine-learning interatomic potentials with a minimal number of parameters is important for their general applicability. Here, we present a machine-learning interatomic potential with the functional form of the bond-order potential for comprehensive exploration over the configuration space of carbon. The physics-based design of this potential enables robust and accura…
▽ More
Construction of transferable machine-learning interatomic potentials with a minimal number of parameters is important for their general applicability. Here, we present a machine-learning interatomic potential with the functional form of the bond-order potential for comprehensive exploration over the configuration space of carbon. The physics-based design of this potential enables robust and accurate description over a wide range of the potential energy surface with a small number of parameters. We demonstrate the versatility of this potential through validations across various tasks, including phonon dispersion calculations, global structure searches for clusters, phase diagram calculations, and enthalpy-volume mappings of local minima structures. We expect that this potential can contribute to the discovery of novel carbon materials.
△ Less
Submitted 20 January, 2025;
originally announced January 2025.
-
Low-Temperature Synthesis of Weakly Confined Carbyne inside Single-Walled Carbon Nanotubes
Authors:
Bo-Wen Zhang,
Xi-Yang Qiu,
Yicheng Ma,
Qingmei Hu,
Aina Fitó-Parera,
Ikuma Kohata,
Ya Feng,
Yongjia Zheng,
Chiyu Zhang,
Yutaka Matsuo,
YuHuang Wang,
Shohei Chiashi,
Keigo Otsuka,
Rong Xiang,
Dmitry I. Levshov,
Sofie Cambré,
Wim Wenseleers,
Slava V. Rotkin,
Shigeo Maruyama
Abstract:
Carbyne, a one-dimensional (1D) carbon allotrope with alternating triple and single bonds, has the highest known mechanical strength but is unstable to bending, limiting synthesis to short linear chains. Encapsulation within carbon nanotubes (CNTs) stabilizes carbyne, forming confined carbyne (CC), thus enabling further research concerning attractive 1D physics and materials properties of carbyne.…
▽ More
Carbyne, a one-dimensional (1D) carbon allotrope with alternating triple and single bonds, has the highest known mechanical strength but is unstable to bending, limiting synthesis to short linear chains. Encapsulation within carbon nanotubes (CNTs) stabilizes carbyne, forming confined carbyne (CC), thus enabling further research concerning attractive 1D physics and materials properties of carbyne. While CC has been synthesized in multi-walled CNTs (MWCNTs) using the arc-discharge method and in double-walled CNTs (DWCNTs) via high-temperature high-vacuum (HTHV) method, synthesis in single-walled CNTs (SWCNTs) has been challenging due to their fragility under such conditions. In this work, we report a low-temperature method to synthesize CC inside SWCNTs (CC@SWCNT). By annealing SWCNTs containing ammonium deoxycholate (ADC) at 400°C, ADC is converted into CC without damaging the SWCNTs. Raman spectroscopy revealed a strong CC phonon (CC-mode) peak at 1860-1870 cm^-1, much stronger than the SWCNT G-band peak, confirming a high fraction of CC in the resulting material. The Raman mapping result showed the uniformity of the CC-mode signal across the entire film sample, proving the high efficiency of this method in synthesizing CC in every SWCNT of appropriate size. Notably, the CC-mode peaks of CC@SWCNT (above 1860 cm^-1) are higher than those reported in previous CC@CNT samples (mostly less than 1856 cm^-1). This is attributed to larger SWCNT diameters (over 0.95 nm) used in this study, compared to the typical 0.6-0.8 nm range. Larger diameters result in reduced confinement, allowing carbyne to closely resemble free-standing carbyne while remaining stabilized. This low-temperature synthesis of long-chain, nearly free-standing carbyne within large-diameter SWCNTs offers new opportunities for exploring 1D physics and the unique properties of carbyne for potential applications.
△ Less
Submitted 27 November, 2024;
originally announced November 2024.
-
Room-temperature quantum emission from interface excitons in mixed-dimensional heterostructures
Authors:
N. Fang,
Y. R. Chang,
S. Fujii,
D. Yamashita,
M. Maruyama,
Y. Gao,
C. F. Fong,
D. Kozawa,
K. Otsuka,
K. Nagashio,
S. Okada,
Y. K. Kato
Abstract:
The development of van der Waals heterostructures has introduced unconventional phenomena that emerge at atomically precise interfaces. For example, interlayer excitons in two-dimensional transition metal dichalcogenides show intriguing optical properties at low temperatures. Here we report on room-temperature observation of interface excitons in mixed-dimensional heterostructures consisting of tw…
▽ More
The development of van der Waals heterostructures has introduced unconventional phenomena that emerge at atomically precise interfaces. For example, interlayer excitons in two-dimensional transition metal dichalcogenides show intriguing optical properties at low temperatures. Here we report on room-temperature observation of interface excitons in mixed-dimensional heterostructures consisting of two-dimensional tungsten diselenide and one-dimensional carbon nanotubes. Bright emission peaks originating from the interface are identified, spanning a broad energy range within the telecommunication wavelengths. The effect of band alignment is investigated by systematically varying the nanotube bandgap, and we assign the new peaks to interface excitons as they only appear in type-II heterostructures. Room-temperature localization of low-energy interface excitons is indicated by extended lifetimes as well as small excitation saturation powers, and photon correlation measurements confirm single-photon emission. With mixed-dimensional van der Waals heterostructures where band alignment can be engineered, new opportunities for quantum photonics are envisioned.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Resonant exciton transfer in mixed-dimensional heterostructures for overcoming dimensional restrictions in optical processes
Authors:
N. Fang,
D. Yamashita,
S. Fujii,
M. Maruyama,
Y. Gao,
Y. R. Chang,
C. F. Fong,
K. Otsuka,
K. Nagashio,
S. Okada,
Y. K. Kato
Abstract:
Nanomaterials exhibit unique optical phenomena, in particular excitonic quantum processes occurring at room temperature. The low dimensionality, however, imposes strict requirements for conventional optical excitation, and an approach for bypassing such restrictions is desirable. Here we report on exciton transfer in carbon-nanotube/tungsten-diselenide heterostructures, where band alignment can be…
▽ More
Nanomaterials exhibit unique optical phenomena, in particular excitonic quantum processes occurring at room temperature. The low dimensionality, however, imposes strict requirements for conventional optical excitation, and an approach for bypassing such restrictions is desirable. Here we report on exciton transfer in carbon-nanotube/tungsten-diselenide heterostructures, where band alignment can be systematically varied. The mixed-dimensional heterostructures display a pronounced exciton reservoir effect where the longer-lifetime excitons within the two-dimensional semiconductor are funneled into carbon nanotubes through diffusion. This new excitation pathway presents several advantages, including larger absorption areas, broadband spectral response, and polarization-independent efficiency. When band alignment is resonant, we observe substantially more efficient excitation via tungsten diselenide compared to direct excitation of the nanotube. We further demonstrate simultaneous bright emission from an array of carbon nanotubes with varied chiralities and orientations. Our findings show the potential of mixed-dimensional heterostructures and band alignment engineering for energy harvesting and quantum applications through exciton manipulation.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Spiking ruby revisited: self-induced periodic spiking oscillations leading to chaotic state in a Cr:Al2O3 laser with cw 532-nm pumping
Authors:
Kenju Otsuka,
Seiichi Sudo
Abstract:
This paper reexamines a 60 year old mystery of spiking behavior in ruby lasers with a cw 532 nm pump, paying special attention to mode matching between the pump and lasing beam within a ruby crystal placed in a semi-confocal laser cavity. Periodic spiking oscillations were observed in a limited pump power regime, where spikes obeying the generic asymmetric hyperbolic function appeared at a repetit…
▽ More
This paper reexamines a 60 year old mystery of spiking behavior in ruby lasers with a cw 532 nm pump, paying special attention to mode matching between the pump and lasing beam within a ruby crystal placed in a semi-confocal laser cavity. Periodic spiking oscillations were observed in a limited pump power regime, where spikes obeying the generic asymmetric hyperbolic function appeared at a repetition rate around 50 kHz and with a 130-150 ns width and 0.1-0.6 microjoule energy depending on the pump power. The physics of the spiking behavior based on Kleinman's mechanical approach and a plausible interpretation for the periodic spiking oscillation in terms of self-induced mode matching between the pump and laser beams through the self-induced Kerr-lens effect are addressed. The statistical nature inherent to spiking and the associated self-organized critical behavior in quasi-periodic spiking oscillations as well as chaotic states occurring outside the periodic spiking regime are also explored from a nonlinear dynamics point of view.
△ Less
Submitted 18 August, 2023; v1 submitted 30 May, 2023;
originally announced May 2023.
-
Edge Dynamics in Iron-Cluster Catalyzed Growth of Single-Walled Carbon Nanotubes Revealed by Molecular Dynamics Simulations based on a Neural Network Potential
Authors:
Ikuma Kohata,
Ryo Yoshikawa,
Kaoru Hisama,
Christophe Bichara,
Keigo Otsuka,
Shigeo Maruyama
Abstract:
Given the high potential for applications utilizing the unique properties of single-walled carbon nanotubes (SWCNTs), there is considerable enthusiasm for addressing the challenges associated with synthesizing SWCNTs with specific chirality. To elucidate the mechanisms that determine the chirality of SWCNTs during growth, intensive efforts have been devoted to classical molecular dynamics (MD) sim…
▽ More
Given the high potential for applications utilizing the unique properties of single-walled carbon nanotubes (SWCNTs), there is considerable enthusiasm for addressing the challenges associated with synthesizing SWCNTs with specific chirality. To elucidate the mechanisms that determine the chirality of SWCNTs during growth, intensive efforts have been devoted to classical molecular dynamics (MD) simulations. However, the mechanism of chirality determination has not been fully clarified, which can partly be attributed to the limited accuracy of empirical interatomic potentials in reproducing the behavior of carbon and metal atoms. In this work, we develop a neural network potential (NNP) for carbon-metal system to accurately describe the SWCNT growth, and perform MD simulations of SWCNT growth using the NNP. The MD simulations illustrate the defect-free, chirality-definable growth of SWCNTs, highlighting the dynamic rearrangement of edge configurations and the consistency between the probability of edge configuration appearance and the entropy-driven edge stability model proposed here. It is also shown that the edge defect formation is induced by vacancy and suppressed by vacancy healing through adatom diffusion on the SWCNT edges. These results provide insights into the edge formation thermodynamics and kinetics of SWCNTs, an important clue to the chirality-controlled synthesis of SWCNTs.
△ Less
Submitted 3 December, 2024; v1 submitted 18 February, 2023;
originally announced February 2023.
-
Self-mixing interference in a thin-slice solid-state laser with few feedback photons per observation period
Authors:
Kenju Otsuka,
Seiichi Sudo
Abstract:
Formation of a peculiar lasing pattern leading to a TEM00-like mode accompanied by a nonzero bright outer-ring emission (namely, a modified TEM00 mode) was observed in a 300-μm-thick LiNdP4O12 (LNP) laser with reflective flat end mirrors that was pumped with a laser diode whose focused spot size was larger than the lasing beam spot size determined by the thermal lens effect. The photon lifetimes o…
▽ More
Formation of a peculiar lasing pattern leading to a TEM00-like mode accompanied by a nonzero bright outer-ring emission (namely, a modified TEM00 mode) was observed in a 300-μm-thick LiNdP4O12 (LNP) laser with reflective flat end mirrors that was pumped with a laser diode whose focused spot size was larger than the lasing beam spot size determined by the thermal lens effect. The photon lifetimes of the laser oscillations were found to be greatly shortened to τ_{p} = 6.74 ps as compared with those in pure TEM00 mode operation, while the fluorescence lifetime was τ= 130 μs. The formation of the peculiar transverse mode was theoretically treated in terms of the pump-intensity-dependent thermal lens effect, which yields the lasing beam spot sizes in the resultant optical cavity. In addition, transverse spatial hole burning of population inversions due to the preceding transverse eigenmode intensity and the associated anti-guidance of the pure TEM00 field leading to formation of the TEM00 with an emergent outer ring emission was shown to appear with increasing pump power through the electric lens (i.e., population lens) effect, in which almost all of the population inversion contributes to lasing with a pronounced effective modal gain. Self-mixing laser Doppler velocimetry (LDV) experiments and numerical simulations revealed that spontaneous emission factors in the peculiar mode oscillations were greatly decreased in comparison with those in pure TEM00 mode operation. The present thin-slice solid-state laser possessing a large fluorescence-to-photon lifetime and decreased spontaneous emission factor enabled us to detect LDV signals in the regime of few feedback photons per observation period.
△ Less
Submitted 14 November, 2022; v1 submitted 30 July, 2022;
originally announced August 2022.
-
Rapid, high-sensitivity detection of biomolecules using dual-comb biosensing: application to the SARS-CoV-2 nucleocapsid protein
Authors:
Shogo Miyamura,
Ryo Oe,
Takuya Nakahara,
Shota Okada,
Shuji Taue,
Yu Tokizane,
Takeo Minamikawa,
Taka-aki Yano,
Kunihiro Otsuka,
Ayuko Sakane,
Takuya Sasaki,
Koji Yasutomo,
Taira Kajisa,
Takeshi Yasui
Abstract:
Rapid, sensitive detection of biomolecules is important for improved testing methods for viruses as well as biomarkers and environmental hormones. For example, testing for SARS-CoV-2 is essential in the fight against the COVID-19 pandemic. Reverse-transcription polymerase chain reaction (RT-PCR) is the current standard for COVID-19 testing; however, it is hampered by the long testing process. Shor…
▽ More
Rapid, sensitive detection of biomolecules is important for improved testing methods for viruses as well as biomarkers and environmental hormones. For example, testing for SARS-CoV-2 is essential in the fight against the COVID-19 pandemic. Reverse-transcription polymerase chain reaction (RT-PCR) is the current standard for COVID-19 testing; however, it is hampered by the long testing process. Shortening the testing process while achieving high sensitivity would facilitate sooner quarantine and thus presumably prevention of the spread of SARS-CoV-2. Here, we aim to achieve rapid, sensitive detection of the SARS-CoV-2 nucleocapsid protein by enhancing the performance of optical biosensing with a dual-comb configuration of optical frequency combs. The virus-concentration-dependent optical spectrum shift is transformed into a photonic RF shift by frequency conversion between the optical and RF regions, facilitating mature electrical frequency measurements. Furthermore, active-dummy temperature-drift compensation enables very small changes in the virus-concentration-dependent signal to be extracted from the large, variable background signal. This dual-comb biosensing technique has the potential to reduce the COVID-19 testing time to 10 min while maintaining sensitivity close to that of RT-PCR. Furthermore, this system can be applied for sensing of not only viruses but also various biomolecules for clinical diagnosis, health care, and environmental monitoring.
△ Less
Submitted 26 July, 2022; v1 submitted 25 April, 2022;
originally announced April 2022.
-
Computational Language $ β$ based on Orthomodular Lattices with the Non-distributivity of Quantum Logic
Authors:
Kazuki Otsuka
Abstract:
It is argued that transformation processes (generation rules) showing evidence of a long evolutionary history in universal computing systems can be generalized. The explicit function class $ Ω$ is defined as follows: "Operators whose eigenvectors (or eigenvalues) have an irrational number in their components constitute a class of functions with quasi-periodic structure, $ Ω$, and the class $ Ω$ sh…
▽ More
It is argued that transformation processes (generation rules) showing evidence of a long evolutionary history in universal computing systems can be generalized. The explicit function class $ Ω$ is defined as follows: "Operators whose eigenvectors (or eigenvalues) have an irrational number in their components constitute a class of functions with quasi-periodic structure, $ Ω$, and the class $ Ω$ shows evidence of a long evolutionary history." In order to empirically prove this theorem by examining physical systems carrying out life activities or intellectual outputs of developed intelligence, the basic framework of the universal machine model C and the computational language $ β$ is presented as a model for general computational methods, which allow transformation processes (generation rules) with deep algorithmic complexity to be derived from generation results. C and $ β$ perform massively parallel computations on event-state systems consisting of exponential combinations of propositional elements expressed in terms of correlations between subsystems. The logical structure of the computational language relies on a non-distributivity in Hilbert spaces or orthogonal modular lattices, allowing for the manipulation and deduction of simultaneous propositions. In this logical local structure, the propositions implying certain consequences are not uniquely determined.
△ Less
Submitted 2 April, 2023; v1 submitted 23 March, 2022;
originally announced March 2022.
-
Quantization of mode shifts in nanocavities integrated with atomically thin sheets
Authors:
N. Fang,
D. Yamashita,
S. Fujii,
K. Otsuka,
T. Taniguchi,
K. Watanabe,
K. Nagashio,
Y. K. Kato
Abstract:
The unique optical properties of two-dimensional layered materials are attractive for achieving increased functionality in integrated photonics. Owing to the van der Waals nature, these materials are ideal for integrating with nanoscale photonic structures. Here we report on carefully designed air-mode silicon photonic crystal nanobeam cavities for efficient control through two-dimensional materia…
▽ More
The unique optical properties of two-dimensional layered materials are attractive for achieving increased functionality in integrated photonics. Owing to the van der Waals nature, these materials are ideal for integrating with nanoscale photonic structures. Here we report on carefully designed air-mode silicon photonic crystal nanobeam cavities for efficient control through two-dimensional materials. By systematically investigating various types and thickness of two-dimensional materials, we are able to show that enhanced responsivity allows for giant shifts of the resonant wavelength. With atomically precise thickness over a macroscopic area, few-layer flakes give rise to quantization of the mode shifts. We extract the dielectric constant of the flakes and find that it is independent of the layer number down to a monolayer. Flexible reconfiguration of a cavity is demonstrated by stacking and removing ultrathin flakes. With an unconventional cavity design, our results open up new possibilities for photonic devices integrated with two-dimensional materials.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Universal map of gas-dependent kinetic selectivity in carbon nanotube growth
Authors:
K. Otsuka,
R. Ishimaru,
A. Kobayashi,
T. Inoue,
R. Xiang,
S. Chiashi,
Y. K. Kato,
S. Maruyama
Abstract:
Single-walled carbon nanotubes have been a candidate for outperforming silicon in ultrascaled transistors, but the realization of nanotube-based integrated circuits requires dense arrays of purely semiconducting species. Control over kinetics and thermodynamics in tube-catalyst systems plays a key role for direct growth of such nanotube arrays, and further progress requires the comprehensive under…
▽ More
Single-walled carbon nanotubes have been a candidate for outperforming silicon in ultrascaled transistors, but the realization of nanotube-based integrated circuits requires dense arrays of purely semiconducting species. Control over kinetics and thermodynamics in tube-catalyst systems plays a key role for direct growth of such nanotube arrays, and further progress requires the comprehensive understanding of seemingly contradictory reports on the growth kinetics. Here, we propose a universal kinetic model and provide its quantitative verification by ethanol-based isotope labeling experiments. While the removal of carbon from catalysts dominates the growth kinetics under a low supply of precursors, our kinetic model and experiments demonstrate that chirality-dependent growth rates emerge when sufficient amounts of carbon and etching agents are co-supplied. As the model can be extended to create kinetic maps as a function of gas compositions, our findings resolve discrepancies in literature and offer rational strategies for chirality selective growth for practical applications.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
One-dimensional van der Waals Heterostructures: Growth Mechanism and Handedness Correlation Revealed by Non-destructive TEM
Authors:
Yongjia Zheng,
Akihito Kumamoto,
Kaoru Hisama,
Keigo Otsuka,
Grace Wickerson,
Yuta Sato,
Ming Liu,
Taiki Inoue,
Shohei Chiashi,
Dai-Ming Tang,
Qiang Zhang,
Anton Anisimov,
Esko I. Kauppinen,
Yan Li,
Kazu Suenaga,
Yuichi Ikuhara,
Shigeo Maruyamaa,
Rong Xiang
Abstract:
In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD) synthesized one-dimensional (1D) van der Waals heterostructures. Edge structures, nucleation sites, crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanot…
▽ More
In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD) synthesized one-dimensional (1D) van der Waals heterostructures. Edge structures, nucleation sites, crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanotubes on a CVD-compatible Si/SiO2 TEM grid, which enabled a transfer-free and non-destructive access to many intrinsic structural details. In particular, we have distinguished different shaped boron nitride nanotube (BNNT) edges, which are confirmed, by electron diffraction at the same location, to be strictly associated with its own chiral angle and polarity. We also demonstrate the importance of surface cleanness and isolation for the formation of perfect 1D heterostructures. Furthermore, we elucidate the handedness correlation between SWCNT template and BNNT crystals. This work not only provides an in-depth understanding of this new 1D heterostructure material group, but also, in a more general perspective, serves as an interesting investigation on crystal growth on highly curved (radius of a couple of nm) atomic substrates.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Nanotube-based one-dimensional heterostructures coupled by van der Waals forces
Authors:
Sofie Cambré,
Ming Liu,
Dmitry Levshov,
Keigo Otsuka,
Shigeo Maruyama,
Rong Xiang
Abstract:
One-dimensional (1D) van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogues, where the number of layers, atomic type and relative orientation…
▽ More
One-dimensional (1D) van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogues, where the number of layers, atomic type and relative orientation of the constituting layers are the main parameters defining physical properties, 1D heterostructures provide an additional degree of freedom, i.e. their specific diameter and chiral structure, for engineering their characteristics. This review discusses the current state-of-the-art in synthesizing 1D heterostructures, in particular focusing on their resulting optical properties, and details the vast parameter space that can be used to design heterostructures with custom-built properties that can be integrated into a large variety of applications. The review starts from describing the effects of van der Waals coupling on the properties of the simplest and best-studied 1D heterostructure, namely a double-wall carbon nanotube, then considers heterostructures built from the inside and the outside, which all use a nanotube as a template, and, finally, provides an outlook for the future of this research field.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Nonlinear dynamics of a self-mixing thin-slice solid-state laser subjected to Doppler shifted optical feedback
Authors:
Kenju Otsuka,
Seiichi Sudo
Abstract:
Chaotic oscillations of a linearly polarized single longitudinal-mode thin-slice Nd:GdVO4 laser placed in a self-mixing laser Doppler velocity scheme were dynamic characterized in terms the intensity probability distribution, joint time-frequency analysis and short-term Fourier transformation of temporal evolutions, and the degree of disorder in the amplitude and phase of the long-term temporal ev…
▽ More
Chaotic oscillations of a linearly polarized single longitudinal-mode thin-slice Nd:GdVO4 laser placed in a self-mixing laser Doppler velocity scheme were dynamic characterized in terms the intensity probability distribution, joint time-frequency analysis and short-term Fourier transformation of temporal evolutions, and the degree of disorder in the amplitude and phase of the long-term temporal evolutions. The transition from chaotic relaxation oscillations (RO) to chaotic spiking oscillations (SO) was explored via the chaotic itinerancy (CI) regime by increasing the feedback ratio toward the laser from a rotating scattering object. The intensity probability distribution was found to change from an exponential decay in the RO regime to an inverse power law in the SO regime, which manifests itself in self-organized critical behavior, while stochastic subharmonic frequency locking among the two periodicities of RO and SO takes place in the CI regime featuring quantum-noise (spontaneous emission)-induced order in the amplitude and phase of the spiking oscillations. All of the experimental results were reproduced by numerical simulations of a model equation of a single-mode self-mixing solid-state laser subjected to Doppler-shifted optical feedback from a rotating scattering object.
△ Less
Submitted 11 October, 2021; v1 submitted 30 May, 2021;
originally announced May 2021.
-
Segmentation of Anatomical Layers and Artifacts in Intravascular Polarization Sensitive Optical Coherence Tomography Using Attending Physician and Boundary Cardinality Losses
Authors:
Mohammad Haft-Javaherian,
Martin Villiger,
Kenichiro Otsuka,
Joost Daemen,
Peter Libby,
Polina Golland,
Brett E. Bouma
Abstract:
Intravascular ultrasound and optical coherence tomography are widely available for characterizing coronary stenoses and provide critical vessel parameters to optimize percutaneous intervention. Intravascular polarization-sensitive optical coherence tomography (PS-OCT) simultaneously provides high-resolution cross-sectional images of vascular structures while also revealing preponderant tissue comp…
▽ More
Intravascular ultrasound and optical coherence tomography are widely available for characterizing coronary stenoses and provide critical vessel parameters to optimize percutaneous intervention. Intravascular polarization-sensitive optical coherence tomography (PS-OCT) simultaneously provides high-resolution cross-sectional images of vascular structures while also revealing preponderant tissue components such as collagen and smooth muscle and thereby enhances plaque characterization. Automated interpretation of these features promises to facilitate the objective clinical investigation of the natural history and significance of coronary atheromas. Here, we propose a convolutional neural network model, optimized using a new multi-term loss function, to classify the lumen, intima, and media layers in addition to the guidewire and plaque shadows. We demonstrate that our multi-class classification model outperforms state-of-the-art methods in detecting the coronary anatomical layers. Furthermore, the proposed model segments two classes of common imaging artifacts and detects the anatomical layers within the thickened vessel wall regions that were excluded from analysis by other studies. The source code and the trained model are publicly available at https://github.com/mhaft/OCTseg
△ Less
Submitted 13 September, 2022; v1 submitted 11 May, 2021;
originally announced May 2021.
-
Quantum emission assisted by energy landscape modification in pentacene-decorated carbon nanotubes
Authors:
Zhen Li,
Keigo Otsuka,
Daiki Yamashita,
Daichi Kozawa,
Yuichiro K. Kato
Abstract:
Photoluminescent carbon nanotubes are expected to become versatile room-temperature single-photon sources that have applications in quantum information processing. Quantum emission from carbon nanotubes is often induced by localization of excitons or exciton-exciton annihilation. Here, we modify the local energy landscape of excitons by decorating nanoscale pentacene particles onto air-suspended s…
▽ More
Photoluminescent carbon nanotubes are expected to become versatile room-temperature single-photon sources that have applications in quantum information processing. Quantum emission from carbon nanotubes is often induced by localization of excitons or exciton-exciton annihilation. Here, we modify the local energy landscape of excitons by decorating nanoscale pentacene particles onto air-suspended single-walled carbon nanotubes. Directional exciton diffusion from the undecorated region to the decorated site is demonstrated, suggesting exciton trapping induced by local dielectric screening from pentacene particles. Photoluminescence and photon correlation measurements on a representative carbon nanotube reveal enhanced exciton-exciton annihilation and single-photon emission at room temperature. Pentacene particles are shown to promote strong photon antibunching at the decorated site, indicating that noncovalent functionalization using molecules can be an effective approach for energy landscape modification and quantum emission in carbon nanotubes.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
-
Formation of Organic Color Centers in Air-Suspended Carbon Nanotubes Using Vapor-Phase Reaction
Authors:
D. Kozawa,
X. Wu,
A. Ishii,
J. Fortner,
K. Otsuka,
R. Xiang,
T. Inoue,
S. Maruyama,
Y. Wang,
Y. K. Kato
Abstract:
Organic color centers in single-walled carbon nanotubes have demonstrated exceptional ability to generate single photons at room temperature in the telecom range. Combining the color centers with pristine air-suspended tubes would be desirable for improved performance, but all current synthetic methods occur in solution which makes them incompatible. Here we demonstrate formation of color centers…
▽ More
Organic color centers in single-walled carbon nanotubes have demonstrated exceptional ability to generate single photons at room temperature in the telecom range. Combining the color centers with pristine air-suspended tubes would be desirable for improved performance, but all current synthetic methods occur in solution which makes them incompatible. Here we demonstrate formation of color centers in air-suspended nanotubes using vapor-phase reaction. Functionalization is directly verified on the same nanotubes by photoluminescence spectroscopy, with unambiguous statistics from more than a few thousand individual nanotubes. The color centers show a strong diameter-dependent emission intensity, which can be explained with a theoretical model for chemical reactivity taking into account strain along the tube curvature. We are also able to estimate the defect density by comparing the experiments with simulations based on a one-dimensional diffusion equation, whereas the analysis of diameter dependent peak energies gives insight to the nature of the dopant states. Time-resolved measurements show a longer lifetime for color center emission compared to E$_{11}$ exciton states. Our results highlight the influence of the tube structure on vapor-phase reactivity and emission properties, providing guidelines for development of high-performance near-infrared quantum light sources.
△ Less
Submitted 28 February, 2021;
originally announced March 2021.
-
Waveguide coupled cavity-enhanced light emission from individual carbon nanotubes
Authors:
D. Yamashita,
H. Machiya,
K. Otsuka,
A. Ishii,
Y. K. Kato
Abstract:
We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual…
▽ More
We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual carbon nanotube is used. The guided light emission from a chirality-identified single carbon nanotube has a narrow linewidth of less than 1.3 nm and an off-resonance rejection of $\sim$17 dB. The waveguide-coupled device configuration is compatible with fully integrated on-chip designs and is promising for carbon-nanotube-based photonics.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Deterministic transfer of optical-quality carbon nanotubes for atomically defined technology
Authors:
K. Otsuka,
N. Fang,
D. Yamashita,
T. Taniguchi,
K. Watanabe,
Y. K. Kato
Abstract:
When continued device scaling reaches the ultimate limit imposed by atoms, technology based on atomically precise structures is expected to emerge. Device fabrication will then require building blocks with identified atomic arrangements and assembly of the components without contamination. Here we report on a versatile dry transfer technique for deterministic placement of optical-quality carbon na…
▽ More
When continued device scaling reaches the ultimate limit imposed by atoms, technology based on atomically precise structures is expected to emerge. Device fabrication will then require building blocks with identified atomic arrangements and assembly of the components without contamination. Here we report on a versatile dry transfer technique for deterministic placement of optical-quality carbon nanotubes. Single-crystalline anthracene is used as a medium which readily sublimes by mild heating, leaving behind clean nanotubes and thus enabling bright photoluminescence. We are able to position nanotubes of a desired chirality with a sub-micron accuracy under in-situ optical monitoring, thereby demonstrating deterministic coupling of a nanotube to a photonic crystal nanobeam cavity. A cross junction structure is also designed and constructed by repeating the nanotube transfer, where intertube exciton transfer is observed. Our results represent an important step towards development of devices consisting of atomically precise components and interfaces.
△ Less
Submitted 3 December, 2020;
originally announced December 2020.
-
High degree of chaos synchronization in pairs of transverse modes with parity-symmetric polarizations in a thin-slice solid-state vector laser and application to polarimetric secure self-mixing metrology
Authors:
Kenju Otsuka
Abstract:
A high degree of chaos synchronization among transverse mode pairs with parity-symmetric polarizations was demonstrated in a laser-diode pumped thin-slice c-cut Nd: GdVO4 laser. The amplitude correlation coefficient greater than R > 0.994 resulted from a non-reversing mirror symmetric-polarization-dependent structural change in the modal patterns, where chaotic dynamics of the whole system consist…
▽ More
A high degree of chaos synchronization among transverse mode pairs with parity-symmetric polarizations was demonstrated in a laser-diode pumped thin-slice c-cut Nd: GdVO4 laser. The amplitude correlation coefficient greater than R > 0.994 resulted from a non-reversing mirror symmetric-polarization-dependent structural change in the modal patterns, where chaotic dynamics of the whole system consisting of qualitatively different dynamics, which depend on the polarization crossing angle, resembled that of a chaotic single mode laser. A self-organized sender-receiver type of chaos synchronization of a single pair of modes among an infinite number of parity-symmetric polarizations and the associated chaotic camouflaging as well as extracting experiment of a self-mixing solid-state laser Doppler velocimetry signal were demonstrated.
△ Less
Submitted 9 October, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
Hexagonal boron nitride as an ideal substrate for carbon nanotube photonics
Authors:
N. Fang,
K. Otsuka,
A. Ishii,
T. Taniguchi,
K. Watanabe,
K. Nagashio,
Y. K. Kato
Abstract:
Hexagonal boron nitride is widely used as a substrate for two-dimensional materials in both electronic and photonic devices. Here, we demonstrate that two-dimensional hexagonal boron nitride is also an ideal substrate for one-dimensional single-walled carbon nanotubes. Nanotubes directly attached to hexagonal boron nitride show bright photoluminescence with narrow linewidth at room temperature, co…
▽ More
Hexagonal boron nitride is widely used as a substrate for two-dimensional materials in both electronic and photonic devices. Here, we demonstrate that two-dimensional hexagonal boron nitride is also an ideal substrate for one-dimensional single-walled carbon nanotubes. Nanotubes directly attached to hexagonal boron nitride show bright photoluminescence with narrow linewidth at room temperature, comparable to air-suspended nanotubes. Using photoluminescence excitation spectroscopy, we unambiguously assign the chiralities of nanotubes on boron nitride by tracking individual tubes before and after contact with boron nitride. Although hexagonal boron nitride has a low dielectric constant and is attached to only one side of the nanotubes, we observe that optical transition energies are redshifted as much as ~50 meV from the air-suspended nanotubes. We also perform statistical measurements on more than 400 tubes, and the redshifts are found to be dependent on tube diameter. This work opens up new possibilities for all-solid-state carbon nanotube photonic devices by utilizing hexagonal boron nitride substrates.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
High degree of chaos synchronization of a single pair of transverse modes with different polarizations in vector lasers subjected to self-mixing modulation
Authors:
Kenju Otsuka
Abstract:
Synchronization of chaos among a single pair of transverse modes featuring intermode dynamical non-independence, resulting from cross-saturation of modal population inversions and coherent modal field coupling, is explored in a thin-slice solid-state laser with coupled orthogonally polarized transverse modes operating in quasi-locked states. The chaotic signals that are created in one of the pairi…
▽ More
Synchronization of chaos among a single pair of transverse modes featuring intermode dynamical non-independence, resulting from cross-saturation of modal population inversions and coherent modal field coupling, is explored in a thin-slice solid-state laser with coupled orthogonally polarized transverse modes operating in quasi-locked states. The chaotic signals that are created in one of the pairing modes (sender) by self-mixing modulations are shown to be transferred solely to the partner mode (receiver) among all the other modal fields with different polarizations. The experimental results are reproduced in a simulation of a model equation of coupled laser modes subjected to self-mixing modulations.
△ Less
Submitted 21 September, 2019;
originally announced September 2019.
-
Dynamic characterization of beating sinusoidal wave oscillations in a thin-slice solid-state laser with coupled orthogonally polarized transverse modes
Authors:
Kenju Otsuka
Abstract:
Dynamic characterization of self-induced beating sinusoidal wave (BSW) oscillations and related phenomena, which were previously explored in a thin-slice dual-polarization solid-state laser operating in the regime of incomplete mode-locking of orthogonally polarized transverse eigenmodes, namely, a quasi-locked state [Laser Physics Letters, 15 (2018) 075001], is performed in terms of the amplitude…
▽ More
Dynamic characterization of self-induced beating sinusoidal wave (BSW) oscillations and related phenomena, which were previously explored in a thin-slice dual-polarization solid-state laser operating in the regime of incomplete mode-locking of orthogonally polarized transverse eigenmodes, namely, a quasi-locked state [Laser Physics Letters, 15 (2018) 075001], is performed in terms of the amplitude correlation coefficient and intensity circulation among various orthogonally polarized mode pairs. Polarization-dependent symmetry-breaking featuring a nonreciprocal intensity flow for different orthogonally polarized mode pairs operating in the BSW state are found. The singular state is hidden in a nonlinear system where a perfect mode-locked BSW state with a large amplitude correlation coefficient featuring reciprocal intensity flow is established for a transverse mode pair possessing particular polarization directions that are related to the intensity ratio of orthogonally polarized transverse eigenmodes. Self-organized chaos synchronization is shown to take place for such a singular transverse mode pair subjected to self-mixing modulations.
△ Less
Submitted 31 August, 2019;
originally announced September 2019.
-
Super-Resolution Fluorescence Imaging of Carbon Nanotubes Using a Nonlinear Excitonic Process
Authors:
K. Otsuka,
A. Ishii,
Y. K. Kato
Abstract:
Highly efficient exciton-exciton annihilation process unique to one-dimensional systems is utilized for super-resolution imaging of air-suspended carbon nanotubes. Through the comparison of fluorescence signals in linear and sublinear regimes at different excitation powers, we extract the efficiency of the annihilation processes using conventional confocal microscopy. Spatial images of the annihil…
▽ More
Highly efficient exciton-exciton annihilation process unique to one-dimensional systems is utilized for super-resolution imaging of air-suspended carbon nanotubes. Through the comparison of fluorescence signals in linear and sublinear regimes at different excitation powers, we extract the efficiency of the annihilation processes using conventional confocal microscopy. Spatial images of the annihilation rate of the excitons have resolution beyond the diffraction limit. We investigate excitation power dependence of the annihilation processes by experiment and Monte Carlo simulation, and the resolution improvement of the annihilation images can be quantitatively explained by the superlinearity of the annihilation process. We have also developed another method in which the cubic dependence of the annihilation rate on exciton density is utilized to achieve further sharpening of single nanotube images.
△ Less
Submitted 19 March, 2019;
originally announced March 2019.
-
Organic molecular tuning of many-body interaction energies in air-suspended carbon nanotubes
Authors:
S. Tanaka,
K. Otsuka,
K. Kimura,
A. Ishii,
H. Imada,
Y. Kim,
Y. K. Kato
Abstract:
We investigate adsorption effects of copper phthalocyanine molecules on excitons and trions in air-suspended carbon nanotubes. Using photoluminescence excitation spectroscopy, we observe that exciton energy redshifts gradually with the molecular deposition thickness. The trion emission is also observed at large deposition amounts, which indicates charge transfer between the phthalocyanine molecule…
▽ More
We investigate adsorption effects of copper phthalocyanine molecules on excitons and trions in air-suspended carbon nanotubes. Using photoluminescence excitation spectroscopy, we observe that exciton energy redshifts gradually with the molecular deposition thickness. The trion emission is also observed at large deposition amounts, which indicates charge transfer between the phthalocyanine molecules and carbon nanotubes. Analysis of the spectra for individual tubes reveal a correlation between the exciton-trion energy separation and the exciton emission energy, showing that the many-body interaction energies scale similarly with the molecular dielectric screening.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
Scintillation-only Based Pulse Shape Discrimination for Nuclear and Electron Recoils in Liquid Xenon
Authors:
K. Ueshima,
K. Abe,
K. Hiraide,
S. Hirano,
Y. Kishimoto,
K. Kobayashi,
Y. Koshio,
J. Liu,
K. Martens,
S. Moriyama,
M. Nakahata,
H. Nishiie,
H. Ogawa,
H. Sekiya,
A. Shinozaki,
Y. Suzuki,
A. Takeda,
M. Yamashita,
K. Fujii,
I. Murayama,
S. Nakamura,
K. Otsuka,
Y. Takeuchi,
Y. Fukuda,
K. Nishijima
, et al. (12 additional authors not shown)
Abstract:
In a dedicated test setup at the Kamioka Observatory we studied pulse shape discrimination (PSD) in liquid xenon (LXe) for dark matter searches. PSD in LXe was based on the observation that scintillation light from electron events was emitted over a longer period of time than that of nuclear recoil events, and our method used a simple ratio of early to total scintillation light emission in a singl…
▽ More
In a dedicated test setup at the Kamioka Observatory we studied pulse shape discrimination (PSD) in liquid xenon (LXe) for dark matter searches. PSD in LXe was based on the observation that scintillation light from electron events was emitted over a longer period of time than that of nuclear recoil events, and our method used a simple ratio of early to total scintillation light emission in a single scintillation event. Requiring an efficiency of 50% for nuclear recoil retention we reduced the electron background to 7.7\pm1.1(stat)\pm1.2 0.6(sys)\times10-2 at energies between 4.8 and 7.2 keVee and to 7.7\pm2.8(stat)\pm2.5 2.8(sys)\times10-3 at energies between 9.6 and 12 keVee for a scintillation light yield of 20.9 p.e./keV. Further study was done by masking some of that light to reduce this yield to 4.6 p.e./keV, the same method results in an electron event reduction of 2.4\pm0.2(stat)\pm0.3 0.2(sys)\times10-1 for the lower of the energy regions above. We also observe that in contrast to nuclear recoils the fluctuations in our early to total ratio for electron events are larger than expected from statistical fluctuations.
△ Less
Submitted 11 June, 2011;
originally announced June 2011.
-
Spontaneous Generation of Vortex Array Beams from a Thin-Slice Solid-State Laser with Wide-Aperture Laser-Diode Pumping
Authors:
Kenju Otsuka,
Shu-Chun Chu
Abstract:
We studied complex lasing pattern formations in a thin-slice solid-state laser with wide-aperture laser-diode end-pumping. Radial and rectangular vortex arrays were found to be formed in a controlled fashion with symmetric and asymmetric pump beam profiles, respectively. Most of these vortices exhibited single-frequency oscillations arising from a spontaneous process of transverse mode locking o…
▽ More
We studied complex lasing pattern formations in a thin-slice solid-state laser with wide-aperture laser-diode end-pumping. Radial and rectangular vortex arrays were found to be formed in a controlled fashion with symmetric and asymmetric pump beam profiles, respectively. Most of these vortices exhibited single-frequency oscillations arising from a spontaneous process of transverse mode locking of nearly degenerate modes assisted by the laser nonlinearity. Single-frequency rectangular array beams consisting of a large number of vortices, e.g., closely packed 36 or 46 vortex pixels, were generated, originating from Ince-Gaussian modes excited by the asymmetric pumping.
△ Less
Submitted 11 July, 2008;
originally announced July 2008.
-
Polarization properties of laser-diode-pumped micro-grained Nd:YAG ceramic lasers
Authors:
Kenju Otsuka,
Takayuki Ohtomo
Abstract:
Detailed polarization properties have been examined in laser-diode-pumped (LD-pumped) micro-grained ceramic Nd:YAG lasers in different microchip cavity configurations. Stable linearly-polarized single-frequency oscillations, whose polarization direction coincide with that of an LD pump light, were observed in an external cavity scheme. While, in the case of a thin-slice laser scheme with coated…
▽ More
Detailed polarization properties have been examined in laser-diode-pumped (LD-pumped) micro-grained ceramic Nd:YAG lasers in different microchip cavity configurations. Stable linearly-polarized single-frequency oscillations, whose polarization direction coincide with that of an LD pump light, were observed in an external cavity scheme. While, in the case of a thin-slice laser scheme with coated reflective ends, elliptically-polarized single-frequency operations took place in the low pump-power regime and dynamic instabilities appeared, featuring self-induced antiphase modulations among counter-rotating circularly-polarized components having slightly different lasing frequencies, with increasing the pump power.
△ Less
Submitted 28 April, 2008; v1 submitted 14 April, 2008;
originally announced April 2008.
-
Brownian Motion Captured with a Self-Mixing Laser
Authors:
Kenju Otsuka,
Koji Kamikariya,
Takayuki Ohtomo,
Seiichi Sudo,
Hironori Makino
Abstract:
We measured the overall motion of Brownian particles suspended in water by a self-mixing thin-slice solid-state laser with extreme optical sensitivity. From the demodulated signal of laser intensity fluctuations through self-mixing modulations by the interference between the lasing field and Doppler-shifted scattered fields from Brownian particles, it was found that the changes over time in rand…
▽ More
We measured the overall motion of Brownian particles suspended in water by a self-mixing thin-slice solid-state laser with extreme optical sensitivity. From the demodulated signal of laser intensity fluctuations through self-mixing modulations by the interference between the lasing field and Doppler-shifted scattered fields from Brownian particles, it was found that the changes over time in random walks of small particles suspended in water result in different overall dynamics when the field of vision for particles seen by the laser beam (scale of the observation) is changed. At a small focal volume of the laser beam, in which the relevant diffusion broadening is observed, the overall motion which can be represented by the motion of a ''virtual'' single particle whose velocity obeys a double-peaked non-Gaussian distribution function. The fast motion of a virtual particle, featuring fractional Brownian motion, which leads to a pure random walk with increasing the observation time, has been characterized in terms of mean-square displacements of a virtual particle.
△ Less
Submitted 23 April, 2008; v1 submitted 23 May, 2005;
originally announced May 2005.
-
Non-stationary Characteristics of the instability in a Single-mode Laser with Fiber Feedback
Authors:
Tsung-Hsun Yang,
Tsong-Hsin Lim,
Jyh-Long Chern,
Kenju Otsuka
Abstract:
Chaotic bursts are observed in a single-mode microchip Nd:YVO$_4$ laser with fiber feedback. The physical characteristic of the instability is a random switching between two different dynamical states, i.e., the noise-driven relaxation oscillation and the chaotic spiking oscillation. As the feedback strength varied, transition which features the strong interplay between two states exhibits and t…
▽ More
Chaotic bursts are observed in a single-mode microchip Nd:YVO$_4$ laser with fiber feedback. The physical characteristic of the instability is a random switching between two different dynamical states, i.e., the noise-driven relaxation oscillation and the chaotic spiking oscillation. As the feedback strength varied, transition which features the strong interplay between two states exhibits and the dynamical switching is found to be non-stationary at the transition.
△ Less
Submitted 26 July, 1999;
originally announced July 1999.
