Showing 1–50 of 127 results for author: O'Hern, C S

Evolution of Adaptive Force Chains in Reconfigurable Granular Metamaterials

Authors: Sven Witthaus, Atoosa Parsa, Dong Wang, Nidhi Pashine, Jerry Zhang, Arthur K. MacKeith, Mark D. Shattuck, Josh Bongard, Corey S. O'Hern, Rebecca Kramer-Bottiglio

Abstract: Under an externally applied load, granular packings form force chains that depend on the contact network and moduli of the grains. In this work, we investigate packings of variable modulus (VM) particles, where we can direct force chains by changing the Young's modulus of individual particles within the packing on demand. Each VM particle is made of a silicone shell that encapsulates a core made o… ▽ More Under an externally applied load, granular packings form force chains that depend on the contact network and moduli of the grains. In this work, we investigate packings of variable modulus (VM) particles, where we can direct force chains by changing the Young's modulus of individual particles within the packing on demand. Each VM particle is made of a silicone shell that encapsulates a core made of a low-melting-point metallic alloy (Field's metal). By sending an electric current through a co-located copper heater, the Field's metal internal to each particle can be melted via Joule heating, which softens the particle. As the particle cools to room temperature, the alloy solidifies and the particle recovers its original modulus. To optimize the mechanical response of granular packings containing both soft and stiff particles, we employ an evolutionary algorithm coupled with discrete element method simulations to predict the patterns of particle moduli that will yield specific force outputs on the assembly boundaries. The predicted patterns of particle moduli from the simulations were realized in experiments using 2D assemblies of VM particles and the force outputs on the assembly boundaries were measured using photoelastic techniques. These studies represent a step towards making robotic granular metamaterials that can dynamically adapt their mechanical properties in response to different environmental conditions or perform specific tasks on demand. △ Less

Submitted 13 March, 2025; v1 submitted 12 March, 2025; originally announced March 2025.

Tuning the Size and Stiffness of Inflatable Particles

Authors: Nidhi Pashine, Dong Wang, Robert Baines, Medha Goyal, Mark D. Shattuck, Corey S. O'Hern, Rebecca Kramer-Bottiglio

Abstract: We describe size-varying cylindrical particles made from silicone elastomers that can serve as building blocks for robotic granular materials. The particle size variation, which is achieved by inflation, gives rise to changes in stiffness under compression. We design and fabricate inflatable particles that can become stiffer or softer during inflation, depending on key parameters of the particle g… ▽ More We describe size-varying cylindrical particles made from silicone elastomers that can serve as building blocks for robotic granular materials. The particle size variation, which is achieved by inflation, gives rise to changes in stiffness under compression. We design and fabricate inflatable particles that can become stiffer or softer during inflation, depending on key parameters of the particle geometry, such as the ratio of the fillet radius to the wall thickness, r/t. We also conduct numerical simulations of the inflatable particles and show that they only soften during inflation when localization of large strains occurs in the regime r/t -> 0. This work introduces novel particle systems with tunable size and stiffness that can be implemented in numerous soft robotic applications. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Comments: 10 pages, 8 figures

Data-driven Modeling of Granular Chains with Modern Koopman Theory

Authors: Atoosa Parsa, James Bagrow, Corey S. O'Hern, Rebecca Kramer-Bottiglio, Josh Bongard

Abstract: Externally driven dense packings of particles can exhibit nonlinear wave phenomena that are not described by effective medium theory or linearized approximate models. Such nontrivial wave responses can be exploited to design sound-focusing/scrambling devices, acoustic filters, and analog computational units. At high amplitude vibrations or low confinement pressures, the effect of nonlinear particl… ▽ More Externally driven dense packings of particles can exhibit nonlinear wave phenomena that are not described by effective medium theory or linearized approximate models. Such nontrivial wave responses can be exploited to design sound-focusing/scrambling devices, acoustic filters, and analog computational units. At high amplitude vibrations or low confinement pressures, the effect of nonlinear particle contacts becomes increasingly noticeable, and the interplay of nonlinearity, disorder, and discreteness in the system gives rise to remarkable properties, particularly useful in designing structures with exotic properties. In this paper, we build upon the data-driven methods in dynamical system analysis and show that the Koopman spectral theory can be applied to granular crystals, enabling their phase space analysis beyond the linearizable regime and without recourse to any approximations considered in the previous works. We show that a deep neural network can map the dynamics to a latent space where the essential nonlinearity of the granular system unfolds into a high-dimensional linear space. As a proof of concept, we use data from numerical simulations of a two-particle system and evaluate the accuracy of the trajectory predictions under various initial conditions. By incorporating data from experimental measurements, our proposed framework can directly capture the underlying dynamics without imposing any assumptions about the physics model. Spectral analysis of the trained surrogate system can help bridge the gap between the simulation results and the physical realization of granular crystals and facilitate the inverse design of materials with desired behaviors. △ Less

Submitted 31 October, 2024; originally announced November 2024.

ProtSCAPE: Mapping the landscape of protein conformations in molecular dynamics

Authors: Siddharth Viswanath, Dhananjay Bhaskar, David R. Johnson, Joao Felipe Rocha, Egbert Castro, Jackson D. Grady, Alex T. Grigas, Michael A. Perlmutter, Corey S. O'Hern, Smita Krishnaswamy

Abstract: Understanding the dynamic nature of protein structures is essential for comprehending their biological functions. While significant progress has been made in predicting static folded structures, modeling protein motions on microsecond to millisecond scales remains challenging. To address these challenges, we introduce a novel deep learning architecture, Protein Transformer with Scattering, Attenti… ▽ More Understanding the dynamic nature of protein structures is essential for comprehending their biological functions. While significant progress has been made in predicting static folded structures, modeling protein motions on microsecond to millisecond scales remains challenging. To address these challenges, we introduce a novel deep learning architecture, Protein Transformer with Scattering, Attention, and Positional Embedding (ProtSCAPE), which leverages the geometric scattering transform alongside transformer-based attention mechanisms to capture protein dynamics from molecular dynamics (MD) simulations. ProtSCAPE utilizes the multi-scale nature of the geometric scattering transform to extract features from protein structures conceptualized as graphs and integrates these features with dual attention structures that focus on residues and amino acid signals, generating latent representations of protein trajectories. Furthermore, ProtSCAPE incorporates a regression head to enforce temporally coherent latent representations. △ Less

Submitted 26 October, 2024; originally announced October 2024.

Comments: Accepted as a short paper at the 5th Molecular Machine Learning Conference (MoML 2024)

Assessment of scoring functions for computational models of protein-protein interfaces

Authors: Jacob Sumner, Grace Meng, Naomi Brandt, Alex T. Grigas, Andrés Córdoba, Mark D. Shattuck, Corey S. O'Hern

Abstract: A goal of computational studies of protein-protein interfaces (PPIs) is to predict the binding site between two monomers that form a heterodimer. The simplest version of this problem is to rigidly re-dock the bound forms of the monomers, which involves generating computational models of the heterodimer and then scoring them to determine the most native-like models. Scoring functions have been asse… ▽ More A goal of computational studies of protein-protein interfaces (PPIs) is to predict the binding site between two monomers that form a heterodimer. The simplest version of this problem is to rigidly re-dock the bound forms of the monomers, which involves generating computational models of the heterodimer and then scoring them to determine the most native-like models. Scoring functions have been assessed previously using rank- and classification-based metrics, however, these methods are sensitive to the number and quality of models in the scoring function training set. We assess the accuracy of seven PPI scoring functions by comparing their scores to a measure of structural similarity to the x-ray crystal structure (i.e. the DockQ score) for a non-redundant set of heterodimers from the Protein Data Bank. For each heterodimer, we generate re-docked models uniformly sampled over DockQ and calculate the Spearman correlation between the PPI scores and DockQ. For some targets, the scores and DockQ are highly correlated; however, for many targets, there are weak correlations. Several physical features can explain the difference between difficult- and easy-to-score targets. For example, strong correlations exist between the score and DockQ for targets with highly intertwined monomers and many interface contacts. We also develop a new score based on only three physical features that matches or exceeds the performance of current PPI scoring functions. These results emphasize that PPI prediction can be improved by focusing on correlations between the PPI score and DockQ and incorporating more discriminating physical features into PPI scoring functions. △ Less

Submitted 23 July, 2024; originally announced July 2024.

Comments: 21 pages, 7 figures

Flow and clogging of capillary droplets

Authors: Yuxuan Cheng, Benjamin F. Lonial, Shivnag Sista, David J. Meer, Anisa Hofert, Eric R. Weeks, Mark D. Shattuck, Corey S. O'Hern

Abstract: Capillary droplets form due to surface tension when two immiscible fluids are mixed. We describe the motion of gravity-driven capillary droplets flowing through narrow constrictions and obstacle arrays in both simulations and experiments. Our new capillary deformable particle model recapitulates the shape and velocity of single oil droplets in water as they pass through narrow constrictions in mic… ▽ More Capillary droplets form due to surface tension when two immiscible fluids are mixed. We describe the motion of gravity-driven capillary droplets flowing through narrow constrictions and obstacle arrays in both simulations and experiments. Our new capillary deformable particle model recapitulates the shape and velocity of single oil droplets in water as they pass through narrow constrictions in microfluidic chambers. Using this experimentally validated model, we simulate the flow and clogging of single capillary droplets in narrow channels and obstacle arrays and find several important results. First, the capillary droplet speed profile is nonmonotonic as the droplet exits the narrow orifice, and we can tune the droplet properties so that the speed overshoots the terminal speed far from the constriction. Second, in obstacle arrays, we find that extremely deformable droplets can wrap around obstacles, which leads to decreased average droplet speed in the continuous flow regime and increased probability for clogging in the regime where permanent clogs form. Third, the wrapping mechanism causes the clogging probability in obstacle arrays to become nonmonotonic with surface tension $Γ$. At large $Γ$, the droplets are nearly rigid and the clogging probability is large since the droplets can not squeeze through the gaps between obstacles. With decreasing $Γ$, the clogging probability decreases as the droplets become more deformable. However, in the small-$Γ$ limit the clogging probability increases, since the droplets are extremely deformable and cause clogs as they wrap around the obstacles. The results from these studies are important for developing a predictive understanding of capillary droplet flows through complex and confined geometries. △ Less

Submitted 17 October, 2024; v1 submitted 19 June, 2024; originally announced June 2024.

Journal ref: Soft Matter 20 (2024) 8036

Protein folding as a jamming transition

Authors: Alex T. Grigas, Zhuoyi Liu, Jack A. Logan, Mark D. Shattuck, Corey S. O'Hern

Abstract: Proteins fold to a specific functional conformation with a densely packed hydrophobic core that controls their stability. We develop a geometric, yet all-atom model for proteins that explains the universal core packing fraction of $φ_c=0.55$ found in experimental measurements. We show that as the hydrophobic interactions increase relative to the temperature, a novel jamming transition occurs when… ▽ More Proteins fold to a specific functional conformation with a densely packed hydrophobic core that controls their stability. We develop a geometric, yet all-atom model for proteins that explains the universal core packing fraction of $φ_c=0.55$ found in experimental measurements. We show that as the hydrophobic interactions increase relative to the temperature, a novel jamming transition occurs when the core packing fraction exceeds $φ_c$. The model also recapitulates the global structure of proteins since it can accurately refold to native-like structures from partially unfolded states. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 5 pages, 4 figures

Journal ref: PRX LIFE 3, 013018 (2025)

Identifying the minimal sets of distance restraints for FRET-assisted protein structural modeling

Authors: Zhuoyi Liu, Alex T. Grigas, Jacob Sumner, Edward Knab, Caitlin M. Davis, Corey S. O'Hern

Abstract: Proteins naturally occur in crowded cellular environments and interact with other proteins, nucleic acids, and organelles. Since most previous experimental protein structure determination techniques require that proteins occur in idealized, non-physiological environments, the effects of realistic cellular environments on protein structure are largely unexplored. Recently, Förster resonance energy… ▽ More Proteins naturally occur in crowded cellular environments and interact with other proteins, nucleic acids, and organelles. Since most previous experimental protein structure determination techniques require that proteins occur in idealized, non-physiological environments, the effects of realistic cellular environments on protein structure are largely unexplored. Recently, Förster resonance energy transfer (FRET) has been shown to be an effective experimental method for investigating protein structure in vivo. Inter-residue distances measured in vivo can be incorporated as restraints in molecular dynamics (MD) simulations to model protein structural dynamics in vivo. Since most FRET studies only obtain inter-residue separations for a small number of amino acid pairs, it is important to determine the minimum number of restraints in the MD simulations that are required to achieve a given root-mean-square deviation (RMSD) from the experimental structural ensemble. Further, what is the optimal method for selecting these inter-residue restraints? Here, we implement several methods for selecting the most important FRET pairs and determine the number of pairs $N_{r}$ that are needed to induce conformational changes in proteins between two experimentally determined structures. We find that enforcing only a small fraction of restraints, $N_{r}/N \lesssim 0.08$, where $N$ is the number of amino acids, can induce the conformational changes. These results establish the efficacy of FRET-assisted MD simulations for atomic scale structural modeling of proteins in vivo. △ Less

Submitted 19 August, 2024; v1 submitted 13 May, 2024; originally announced May 2024.

Gradient-based Design of Computational Granular Crystals

Authors: Atoosa Parsa, Corey S. O'Hern, Rebecca Kramer-Bottiglio, Josh Bongard

Abstract: There is growing interest in engineering unconventional computing devices that leverage the intrinsic dynamics of physical substrates to perform fast and energy-efficient computations. Granular metamaterials are one such substrate that has emerged as a promising platform for building wave-based information processing devices with the potential to integrate sensing, actuation, and computation. Thei… ▽ More There is growing interest in engineering unconventional computing devices that leverage the intrinsic dynamics of physical substrates to perform fast and energy-efficient computations. Granular metamaterials are one such substrate that has emerged as a promising platform for building wave-based information processing devices with the potential to integrate sensing, actuation, and computation. Their high-dimensional and nonlinear dynamics result in nontrivial and sometimes counter-intuitive wave responses that can be shaped by the material properties, geometry, and configuration of individual grains. Such highly tunable rich dynamics can be utilized for mechanical computing in special-purpose applications. However, there are currently no general frameworks for the inverse design of large-scale granular materials. Here, we build upon the similarity between the spatiotemporal dynamics of wave propagation in material and the computational dynamics of Recurrent Neural Networks to develop a gradient-based optimization framework for harmonically driven granular crystals. We showcase how our framework can be utilized to design basic logic gates where mechanical vibrations carry the information at predetermined frequencies. We compare our design methodology with classic gradient-free methods and find that our approach discovers higher-performing configurations with less computational effort. Our findings show that a gradient-based optimization method can greatly expand the design space of metamaterials and provide the opportunity to systematically traverse the parameter space to find materials with the desired functionalities. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Computational modeling of the physical features that influence breast cancer invasion into adipose tissue

Authors: Yitong Zheng, Dong Wang, Garrett Beeghly, Claudia Fischbach, Mark D. Shattuck, Corey S. O'Hern

Abstract: Breast cancer invasion into adipose tissue strongly influences disease progression and metastasis. The degree of cancer cell invasion into adipose tissue depends on numerous biochemical and physical properties of cancer cells, adipocytes, and other key components of adipose tissue. We model breast cancer invasion into adipose tissue as a physical process by carrying out simulations of active, cohe… ▽ More Breast cancer invasion into adipose tissue strongly influences disease progression and metastasis. The degree of cancer cell invasion into adipose tissue depends on numerous biochemical and physical properties of cancer cells, adipocytes, and other key components of adipose tissue. We model breast cancer invasion into adipose tissue as a physical process by carrying out simulations of active, cohesive spherical particles (cancer cells) invading into confluent packings of deformable polyhedra (adipocytes). We quantify the degree of invasion by calculating the interfacial area $A_t$ between cancer cells and adipocytes. We determine the long-time value of $A_t$ versus the activity and strength of the cohesion between cancer cells, as well as mechanical properties of the adipocytes and extracellular matrix (ECM) in which the adipocytes are embedded. We show that the degree of invasion collapses onto a master curve by plotting it versus a dimensionless energy scale $E_c$, which grows linearly with mean-square fluctuations and persistence time of the cancer cell velocities, is inversely proportional to the pressure of the system, and has an offset that increases with the cancer cell cohesive energy. The condition, $E_c \gg 1$, indicates that cancer cells will invade the adipose tissue, whereas for $E_c \ll 1$, the cancer cells and adipocytes remain demixed. We also show that constraints on adipocyte positions by the ECM decrease $A_t$ relative to that obtained for unconstrained adipocytes. Finally, spatial heterogeneity in structural and mechanical properties of the adipocytes in the presence of ECM impedes invasion relative to adipose tissue with uniform properties. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Journal ref: APL Bioengineering 8 (2024) 036104

Identifying topologically associating domains using differential kernels

Authors: Luka Maisuradze, Megan C. King, Ivan V. Surovtsev, Simon G. J. Mochrie, Mark D. Shattuck, Corey S. O'Hern

Abstract: Chromatin is a polymer complex of DNA and proteins that regulates gene expression. The three-dimensional structure and organization of chromatin controls DNA transcription and replication. High-throughput chromatin conformation capture techniques generate Hi-C maps that can provide insight into the 3D structure of chromatin. Hi-C maps can be represented as a symmetric matrix where each element rep… ▽ More Chromatin is a polymer complex of DNA and proteins that regulates gene expression. The three-dimensional structure and organization of chromatin controls DNA transcription and replication. High-throughput chromatin conformation capture techniques generate Hi-C maps that can provide insight into the 3D structure of chromatin. Hi-C maps can be represented as a symmetric matrix where each element represents the average contact probability or number of contacts between two chromatin loci. Previous studies have detected topologically associating domains (TADs), or self-interacting regions in Hi-C maps within which the contact probability is greater than that outside the region. Many algorithms have been developed to identify TADs within Hi-C maps. However, most TAD identification algorithms are unable to identify nested or overlapping TADs and for a given Hi-C map there is significant variation in the location and number of TADs identified by different methods. We develop a novel method, KerTAD, using a kernel-based technique from computer vision and image processing that is able to accurately identify nested and overlapping TADs. We benchmark this method against state-of-the-art TAD identification methods on both synthetic and experimental data sets. We find that KerTAD consistently has higher true positive rates (TPR) and lower false discovery rates (FDR) than all tested methods for both synthetic and manually annotated experimental Hi-C maps. The TPR for KerTAD is also largely insensitive to increasing noise and sparsity, in contrast to the other methods. We also find that KerTAD is consistent in the number and size of TADs identified across replicate experimental Hi-C maps for several organisms. KerTAD will improve automated TAD identification and enable researchers to better correlate changes in TADs to biological phenomena, such as enhancer-promoter interactions and disease states. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 23 pages, 10 figures

Journal ref: PLoS Computational Biology 20 (2024) e1012221

Modeling the effects of varying Ti concentration on the mechanical properties of Cu-Ti alloys

Authors: Vasileios Fotopoulos, Corey S. O'Hern, Mark D. Shattuck, Alexander L. Shluger

Abstract: The mechanical properties of Cu-Ti alloys have been characterized extensively through experimental studies. However, a detailed understanding of why the strength of Cu increases after a small fraction of Ti atoms is added to the alloy is still missing. In this work, we address this question using density functional theory (DFT) and molecular dynamics (MD) simulations with modified embedded atom me… ▽ More The mechanical properties of Cu-Ti alloys have been characterized extensively through experimental studies. However, a detailed understanding of why the strength of Cu increases after a small fraction of Ti atoms is added to the alloy is still missing. In this work, we address this question using density functional theory (DFT) and molecular dynamics (MD) simulations with modified embedded atom method (MEAM) interatomic potentials. First, we performed calculations of uniaxial tension deformations of small bicrystalline Cu cells using DFT static simulations. We then carried out uniaxial tension deformations on much larger bicrystalline and polycrystalline Cu cells using MEAM MD simulations. In bicrystalline Cu, the inclusion of Ti increases the grain boundary separation energy and maximum tensile stress. The DFT calculations demonstrate that the increase in tensile stress can be attributed to an increase in the local charge density arising from Ti. MEAM simulations in larger bicrystalline systems have shown that increasing the Ti concentration decreases the density of stacking faults. This observation is enhanced in polycrystalline Cu, where the addition of Ti atoms, even at concentrations as low as 1.5 at.%, increases the yield strength and elastic modulus of the material compared to pure Cu. Under uniaxial tensile loading, the addition of small amounts of Ti hinders the formation of partial Shockley dislocations in the grain boundaries of Cu, leading to reduced local deformation. These results shed light on the role of Ti in determining the mechanical properties of polycrystalline Cu and will enable the engineering of grain boundaries and the inclusion of Ti to improve degradation resistance. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Journal ref: ACS omega 9.9 (2024) 10286-10298

The connection between polymer collapse and the onset of jamming

Authors: Alex T. Grigas, Aliza Fisher, Mark D. Shattuck, Corey S. O'Hern

Abstract: Previous studies have shown that the interiors of proteins are densely packed, reaching packing fractions that are as large as those found for static packings of individual amino-acid-shaped particles. How can the interiors of proteins take on such high packing fractions given that amino acids are connected by peptide bonds and many amino acids are hydrophobic with attractive interactions? We inve… ▽ More Previous studies have shown that the interiors of proteins are densely packed, reaching packing fractions that are as large as those found for static packings of individual amino-acid-shaped particles. How can the interiors of proteins take on such high packing fractions given that amino acids are connected by peptide bonds and many amino acids are hydrophobic with attractive interactions? We investigate this question by comparing the structural and mechanical properties of collapsed attractive disk-shaped bead-spring polymers to those of three reference systems: static packings of repulsive disks, of attractive disks, and of repulsive disk-shaped bead-spring polymers. We show that attractive systems quenched to temperatures below the glass transition $T \ll T_g$ and static packings of both repulsive disks and bead-spring polymers possess similar interior packing fractions. Previous studies have shown that static packings of repulsive disks are isostatic at jamming onset, i.e. the number of contacts $N_c$ matches the number of degrees of freedom, which strongly influences their mechanical properties. We find that repulsive polymers are hypostatic at jamming onset, but effectively isostatic when including quartic modes. While attractive disk and polymer packings are hyperstatic, we identify a definition for interparticle contacts for which they can also be considered as effectively isostatic. As a result, we show that the mechanical properties (e.g. scaling of the potential energy with excess contact number and low-frequency contribution to the density of vibrational modes) of weakly attractive disk and polymer packings are similar to those of ${\it isostatic}$ repulsive disk and polymer packings. Our results demonstrate that static packings generated via attractive collapse or compression of repulsive particles possess similar structural and mechanical properties. △ Less

Submitted 16 September, 2023; originally announced September 2023.

Comments: 17 pages, 16 figures, 2 appendices

Journal ref: Phys. Rev. E 109, 034406 (2024)

Universal Mechanical Polycomputation in Granular Matter

Authors: Atoosa Parsa, Sven Witthaus, Nidhi Pashine, Corey S. O'Hern, Rebecca Kramer-Bottiglio, Josh Bongard

Abstract: Unconventional computing devices are increasingly of interest as they can operate in environments hostile to silicon-based electronics, or compute in ways that traditional electronics cannot. Mechanical computers, wherein information processing is a material property emerging from the interaction of components with the environment, are one such class of devices. This information processing can be… ▽ More Unconventional computing devices are increasingly of interest as they can operate in environments hostile to silicon-based electronics, or compute in ways that traditional electronics cannot. Mechanical computers, wherein information processing is a material property emerging from the interaction of components with the environment, are one such class of devices. This information processing can be manifested in various physical substrates, one of which is granular matter. In a granular assembly, vibration can be treated as the information-bearing mode. This can be exploited to realize "polycomputing": materials can be evolved such that a single grain within them can report the result of multiple logical operations simultaneously at different frequencies, without recourse to quantum effects. Here, we demonstrate the evolution of a material in which one grain acts simultaneously as two different NAND gates at two different frequencies. NAND gates are of interest as any logical operations can be built from them. Moreover, they are nonlinear thus demonstrating a step toward general-purpose, computationally dense mechanical computers. Polycomputation was found to be distributed across each evolved material, suggesting the material's robustness. With recent advances in material sciences, hardware realization of these materials may eventually provide devices that challenge the computational density of traditional computers. △ Less

Submitted 28 May, 2023; originally announced May 2023.

Comments: Accepted to the Genetic and Evolutionary Computation Conference 2023 (GECCO '23)

Mechanical Plasticity of Cell Membranes Enhances Epithelial Wound Closure

Authors: Andrew T. Ton, Arthur K. MacKeith, Mark D. Shattuck, Corey S. O'Hern

Abstract: During epithelial wound healing, cell morphology near the healed wound and the healing rate vary strongly among different developmental stages even for a single species like \textit{Drosophila}. We develop deformable particle (DP) model simulations to understand how variations in cell mechanics give rise to distinct wound closure phenotypes in the \textit{Drosophila} embryonic ectoderm and larval… ▽ More During epithelial wound healing, cell morphology near the healed wound and the healing rate vary strongly among different developmental stages even for a single species like \textit{Drosophila}. We develop deformable particle (DP) model simulations to understand how variations in cell mechanics give rise to distinct wound closure phenotypes in the \textit{Drosophila} embryonic ectoderm and larval wing disc epithelium. We find that plastic deformation of the cell membrane can generate large changes in cell shape consistent with wound closure in the embryonic ectoderm. Our results show that the embryonic ectoderm is best described by cell membranes with an elasto-plastic response, whereas the larval wing disc is best described by cell membranes with an exclusively elastic response. By varying the mechanical response of cell membranes in DP simulations, we recapitulate the wound closure behavior of both the embryonic ectoderm and the larval wing disc. △ Less

Submitted 10 December, 2023; v1 submitted 19 May, 2023; originally announced May 2023.

Journal ref: Phys.Rev.Research. 6 (2024) L012036

Tessellated granular metamaterials with tunable elastic moduli

Authors: Nidhi Pashine, Dong Wang, Jerry Zhang, Sree Kalyan Patiballa, Sven Witthaus, Mark D. Shattuck, Corey S. O'Hern, Rebecca Kramer-Bottiglio

Abstract: Most granular packings possess shear moduli ($G$) that increase with the applied external pressure, and bulk moduli ($B$) that increase or remain constant with pressure. This paper presents "tessellated" granular metamaterials for which both $G$ and the ratio $G/B$ decrease with increasing pressure. The granular metamaterials are made from flexible tessellations forming a ring of closed cells, eac… ▽ More Most granular packings possess shear moduli ($G$) that increase with the applied external pressure, and bulk moduli ($B$) that increase or remain constant with pressure. This paper presents "tessellated" granular metamaterials for which both $G$ and the ratio $G/B$ decrease with increasing pressure. The granular metamaterials are made from flexible tessellations forming a ring of closed cells, each containing a small number of solid particles. For under-constrained tessellations, the dominant contributions to $G$ and $B$ are the particle-particle and particle-cell interactions. With specific particle configurations in the cells, we limit the number of possible particle rearrangements to achieve decreasing $G$ as we increase the pressure difference between the inside and outside of the tessellation, leading to $G/B \ll 1$ at large pressures. We further study tessellated granular metamaterials with cells containing a single particle and many particles to determine the variables that control the mechanical response of particle-filled tessellations as a function of pressure. △ Less

Submitted 21 March, 2023; originally announced March 2023.

Comments: 16 pages, 6 figures

Journal ref: Extreme Mechanics Letters 63, 102055 (2023)

Designing the pressure-dependent shear modulus using tessellated granular metamaterials

Authors: Jerry Zhang, Dong Wang, Weiwei Jin, Annie Xia, Nidhi Pashine, Rebecca Kramer-Bottiglio, Mark D. Shattuck, Corey S. O'Hern

Abstract: Jammed packings of granular materials display complex mechanical response. For example, the ensemble-averaged shear modulus $\left\langle G \right\rangle$ increases as a power-law in pressure $p$ for static packings of soft spherical particles that can rearrange during compression. We seek to design granular materials with shear moduli that can either increase {\it or} decrease with pressure witho… ▽ More Jammed packings of granular materials display complex mechanical response. For example, the ensemble-averaged shear modulus $\left\langle G \right\rangle$ increases as a power-law in pressure $p$ for static packings of soft spherical particles that can rearrange during compression. We seek to design granular materials with shear moduli that can either increase {\it or} decrease with pressure without particle rearrangements even in the large-system limit. To do this, we construct {\it tessellated} granular metamaterials by joining multiple particle-filled cells together. We focus on cells that contain a small number of bidisperse disks in two dimensions. We first study the mechanical properties of individual disk-filled cells with three types of boundaries: periodic boundary conditions (PBC), fixed-length walls (FXW), and flexible walls (FLW). Hypostatic jammed packings are found for cells with FLW, but not in cells with PBC and FXW, and they are stabilized by quartic modes of the dynamical matrix. The shear modulus of a single cell depends linearly on $p$. We find that the slope of the shear modulus with pressure, $λ_c < 0$ for all packings in single cells with PBC where the number of particles per cell $N \ge 6$. In contrast, single cells with FXW and FLW can possess $λ_c > 0$, as well as $λ_c < 0$, for $N \le 16$. We show that we can force the mechanical properties of multi-cell granular metamaterials to possess those of single cells by constraining the endpoints of the outer walls and enforcing an affine shear response. These studies demonstrate that tessellated granular metamaterials provide a novel platform for the design of soft materials with specified mechanical properties. △ Less

Submitted 10 September, 2023; v1 submitted 17 March, 2023; originally announced March 2023.

Journal ref: Phys. Rev. E 108, 034901 (2023)

Local and global measures of the shear moduli of jammed disk packings

Authors: S. Zhang, W. Jin, D. Wang, D. Xu, J. Zhang, M. D. Shattuck, C. S. O'Hern

Abstract: Strain-controlled isotropic compression gives rise to jammed packings of repulsive, frictionless disks with either positive or negative global shear moduli. We carry out computational studies to understand the contributions of the negative shear moduli to the mechanical response of jammed disk packings. We first decompose the ensemble-averaged, global shear modulus as… ▽ More Strain-controlled isotropic compression gives rise to jammed packings of repulsive, frictionless disks with either positive or negative global shear moduli. We carry out computational studies to understand the contributions of the negative shear moduli to the mechanical response of jammed disk packings. We first decompose the ensemble-averaged, global shear modulus as $\langle G\rangle = (1-{\cal F}_-) \langle G_+ \rangle + {\cal F}_- \langle G_-\rangle$, where ${\cal F}_-$ is the fraction of jammed packings with negative shear moduli and $\langle G_+\rangle$ and $\langle G_-\rangle$ are the average values from packings with positive and negative moduli, respectively. We show that $\langle G_+\rangle$ and $\langle|G_-|\rangle$ obey different power-law scaling relations above and below $pN^2 \sim 1$. We then calculate analytically that ${\cal P}(G)$ is a Gamma distribution in the $pN^2 \ll 1$ limit. As $pN^2$ increases, the skewness of ${\cal P}(G)$ decreases and ${\cal P}(G)$ becomes a skew-normal distribution with negative skewness in the $pN^2 \gg 1$ limit. We also partition jammed disk packings into subsystems using Delanunay triangulation of the disk centers to calculate local shear moduli. We show that the local shear moduli defined from groups of adjacent triangles can be negative even when $G > 0$. The spatial correlation function of local shear moduli $C({\vec r})$ displays weak correlations for $pn_{\rm sub}^2 < 10^{-2}$, where $n_{\rm sub}$ is the number of particles within each subsystem. However, $C({\vec r})$ begins to develop long-ranged spatial correlations with four-fold angular symmetry for $pn_{\rm sub}^2 \gtrsim 10^{-2}$. △ Less

Submitted 5 February, 2023; originally announced February 2023.

Comments: 17 pages, 21 figures

Journal ref: Phys. Rev. E 107 (2023) 054903

Characterizing the mechanical response of metallic glasses to uniaxial tension using a spring network model

Authors: Aya Nawano, Jan Schroers, Mark D. Shattuck, Corey S. O'Hern

Abstract: Metallic glasses are frequently used as structural materials. Therefore, it is important to develop methods to predict their mechanical response as a function of the microstructure prior to loading. We develop a coarse-grained spring network model, which describes the mechanical response of metallic glasses using an equivalent series network of springs, which can break and re-form to mimic atomic… ▽ More Metallic glasses are frequently used as structural materials. Therefore, it is important to develop methods to predict their mechanical response as a function of the microstructure prior to loading. We develop a coarse-grained spring network model, which describes the mechanical response of metallic glasses using an equivalent series network of springs, which can break and re-form to mimic atomic rearrangements during deformation. To validate the model, we perform simulations of quasistatic, uniaxial tension of Lennard-Jones and embedded atom method (EAM) potentials for Cu$_{50}$Zr$_{50}$ metallic glasses. We consider samples prepared using a wide range of cooling rates and with different amounts of crystalline order. We show that both the Lennard-Jones and EAM models possess qualitatively similar stress $σ$ versus strain $γ$ curves. By specifying five parameters in the spring network model (ultimate strength, strain at ultimate strength, slopes of $σ(γ)$ at $γ=0$ and at large strain, and strain at fracture where $σ=0$), we can accurately describe the form of the stress-strain curves during uniaxial tension for the computational studies of Cu$_{50}$Zr$_{50}$, as well as recent experimental studies of several Zr-based metallic glasses. For the computational studies of Cu$_{50}$Zr$_{50}$, we find that the yield strain distribution is shifted to larger strains for slowly cooled glasses compared to rapidly cooled glasses. In addition, the average number of new springs and their rate of formation decreases with decreasing cooling rate. These effects offset each other at large strains, causing the stress-strain curve to become independent of the sample preparation protocol in this regime. In future studies, we will extract the parameters that define the spring network model directly from atomic rearrangements that occur during uniaxial deformation. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 16 pages, 13 figures

Journal ref: Phys. Rev. Materials 7 (2023) 073605

The Jamming Transition and the Marginally Stable Solid

Authors: Francesco Arceri, Eric I. Corwin, Corey S. O'Hern

Abstract: We review the physics of jamming from the theoretical, experimental and numerical perspectives. We summarize the mean-field theory of jamming and the marginally stable solid phase, with particular emphasis on the connection with the Replica Symmetry Breaking theory of glasses. We report validations of the mean-field theory of jamming from experimental and numerical studies of critical behaviors ne… ▽ More We review the physics of jamming from the theoretical, experimental and numerical perspectives. We summarize the mean-field theory of jamming and the marginally stable solid phase, with particular emphasis on the connection with the Replica Symmetry Breaking theory of glasses. We report validations of the mean-field theory of jamming from experimental and numerical studies of critical behaviors near the transition. In particular, we describe the physics of jamming of frictionless, spherical particles, as well as more recent work on jamming of frictionless, non-spherical particles and frictional, nearly spherical particles. We also present current efforts in expanding the mean-field theory to systems that more closely resemble externally driven granular media, cell aggregates, and active colloidal suspensions. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: To appear as a contribution to the edited volume "Spin Glass Theory & Far Beyond - Replica Symmetry Breaking after 40 Years", World Scientific

Localized growth drives spongy mesophyll morphogenesis

Authors: John D. Treado, Adam B. Roddy, Guillaume Théroux-Rancourt, Liyong Zhang, Chris Ambrose, Craig Brodersen, Mark D. Shattuck, Corey S. O'Hern

Abstract: The spongy mesophyll is a complex, porous tissue found in plant leaves that enables carbon capture and provides mechanical stability. Unlike many other biological tissues, which remain confluent throughout development, the spongy mesophyll must develop from an initially confluent tissue into a tortuous network of cells with a large proportion of intercellular airspace. How the airspace in the spon… ▽ More The spongy mesophyll is a complex, porous tissue found in plant leaves that enables carbon capture and provides mechanical stability. Unlike many other biological tissues, which remain confluent throughout development, the spongy mesophyll must develop from an initially confluent tissue into a tortuous network of cells with a large proportion of intercellular airspace. How the airspace in the spongy mesophyll develops while the cells remain mechanically stable remains unknown. Here, we used computer simulations of deformable particles to develop a purely mechanical model for the development of the spongy mesophyll tissue. By stipulating that (1) cell perimeter grows only near voids, (2) cells both form and break adhesive bonds, and (3) the tissue pressure remains constant, the computational model was able to recapitulate the developmental trajectory of the microstructure of the spongy mesophyll observed in Arabidopsis thaliana leaves. Robust generation of pore space in the spongy mesophyll requires a balance of cell growth, adhesion, stiffness and tissue pressure to ensure cell networks remain both porous yet mechanically robust. The success of this mechanical model of tissue growth and porosity evolution suggests that simple physical principles can coordinate and drive the development of complex plant tissues like the spongy mesophyll. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 28 pages, 6 figures, 1 table, 9 pages of supplementary information

Journal ref: J. R. Soc. Interface (2022) 19: 20220602

Hopper flows of deformable particles

Authors: Y. Cheng, J. D. Treado, B. Lonial, P. Habdas, E. R. Weeks, M. D. Shattuck, C. S. O'Hern

Abstract: Numerous experimental and computational studies show that continuous hopper flows of granular materials obey the Beverloo equation that relates the volume flow rate $Q$ and the orifice width $w$: $Q \sim (w/σ_{\rm avg}-k)^β$, where $σ_{\rm avg}$ is the average particle diameter, $kσ_{\rm avg}$ is an offset where $Q\sim 0$, the power-law scaling exponent $β=d-1/2$, and $d$ is the spatial dimension.… ▽ More Numerous experimental and computational studies show that continuous hopper flows of granular materials obey the Beverloo equation that relates the volume flow rate $Q$ and the orifice width $w$: $Q \sim (w/σ_{\rm avg}-k)^β$, where $σ_{\rm avg}$ is the average particle diameter, $kσ_{\rm avg}$ is an offset where $Q\sim 0$, the power-law scaling exponent $β=d-1/2$, and $d$ is the spatial dimension. Recent studies of hopper flows of deformable particles in different background fluids suggest that the particle stiffness and dissipation mechanism can also strongly affect the power-law scaling exponent $β$. We carry out computational studies of hopper flows of deformable particles with both kinetic friction and background fluid dissipation in two and three dimensions. We show that the exponent $β$ varies continuously with the ratio of the viscous drag to the kinetic friction coefficient, $λ=ζ/μ$. $β= d-1/2$ in the $λ\rightarrow 0$ limit and $d-3/2$ in the $λ\rightarrow \infty$ limit, with a midpoint $λ_c$ that depends on the hopper opening angle $θ_w$. We also characterize the spatial structure of the flows and associate changes in spatial structure of the hopper flows to changes in the exponent $β$. The offset $k$ increases with particle stiffness until $k \sim k_{\rm max}$ in the hard-particle limit, where $k_{\rm max} \sim 3.5$ is larger for $λ\rightarrow \infty$ compared to that for $λ\rightarrow 0$. Finally, we show that the simulations of hopper flows of deformable particles in the $λ\rightarrow \infty$ limit recapitulate the experimental results for quasi-2D hopper flows of oil droplets in water. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 15 pages, 12 figures

Journal ref: Soft Matter 18 (2022) 8071

Universal mechanical response of metallic glasses during strain-rate-dependent uniaxial compression

Authors: Weiwei Jin, Amit Datye, Udo D. Schwarz, Mark D. Shattuck, Corey S. O'Hern

Abstract: Experimental data on the compressive strength $σ_{\rm max}$ versus strain rate ${\dot \varepsilon}_{\rm eng}$ for metallic glasses undergoing uniaxial compression shows significantly different behavior for different alloys. For some metallic glasses, $σ_{\rm max}$ decreases with increasing ${\dot \varepsilon}_{\rm eng}$, for others, $σ_{\rm max}$ increases with increasing… ▽ More Experimental data on the compressive strength $σ_{\rm max}$ versus strain rate ${\dot \varepsilon}_{\rm eng}$ for metallic glasses undergoing uniaxial compression shows significantly different behavior for different alloys. For some metallic glasses, $σ_{\rm max}$ decreases with increasing ${\dot \varepsilon}_{\rm eng}$, for others, $σ_{\rm max}$ increases with increasing ${\dot \varepsilon}_{\rm eng}$, and for others $σ_{\rm max}$ versus ${\dot \varepsilon}_{\rm eng}$ is nonmonotonic. Using numerical simulations of metallic glasses undergoing uniaxial compression at nonzero strain rate and temperature, we show that they obey a universal relation for the compressive strength versus temperature, which determines their mechanical response. At low ${\dot \varepsilon}_{\rm eng}$, increasing strain rate leads to increases in temperature and decreases in $σ^*_{\rm max}$, whereas at high ${\dot \varepsilon}_{\rm eng}$, increasing strain rate leads to decreases in temperature and increases in $σ^*_{\rm max}$. This non-monotonic behavior of $σ^*_{\rm max}$ versus temperature causes the nonmonotonic behavior of $σ^*_{\rm max}$ versus ${\dot \varepsilon}_{\rm eng}$. Variations in the internal dissipation change the characteristic strain rate at which the nonmonotonic behavior occurs. These results are general for a wide range of metallic glasses with different atomic interactions, damping coefficients, and chemical compositions. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Comments: 5 pages, 3 figures

Journal ref: Physical Review Materials 7, 105604 (2023)

Evolving Programmable Computational Metamaterials

Authors: Atoosa Parsa, Dong Wang, Corey S. O'Hern, Mark D. Shattuck, Rebecca Kramer-Bottiglio, Josh Bongard

Abstract: Granular metamaterials are a promising choice for the realization of mechanical computing devices. As preliminary evidence of this, we demonstrate here how to embed Boolean logic gates (AND and XOR) into a granular metamaterial by evolving where particular grains are placed in the material. Our results confirm the existence of gradients of increasing "AND-ness" and "XOR-ness" within the space of p… ▽ More Granular metamaterials are a promising choice for the realization of mechanical computing devices. As preliminary evidence of this, we demonstrate here how to embed Boolean logic gates (AND and XOR) into a granular metamaterial by evolving where particular grains are placed in the material. Our results confirm the existence of gradients of increasing "AND-ness" and "XOR-ness" within the space of possible materials that can be followed by evolutionary search. We measure the computational functionality of a material by probing how it transforms bits encoded as vibrations with zero or non-zero amplitude. We compared the evolution of materials built from mass-contrasting particles and materials built from stiffness-contrasting particles, and found that the latter were more evolvable. We believe this work may pave the way toward evolutionary design of increasingly sophisticated, programmable, and computationally dense metamaterials with certain advantages over more traditional computational substrates. △ Less

Submitted 3 June, 2022; v1 submitted 19 April, 2022; originally announced April 2022.

Comments: Accepted to the Genetic and Evolutionary Computation Conference 2022 (GECCO '22)

The glass-forming ability of binary Lennard-Jones systems

Authors: Yuan-Chao Hu, Weiwei Jin, Jan Schroers, Mark D. Shattuck, Corey S. O'Hern

Abstract: The glass-forming ability (GFA) of alloys, colloidal dispersions, and other particulate materials, as measured by the critical cooling rate $R_c$, can span more than ten orders of magnitude. Even after numerous previous studies, the physical features that control the GFA are still not well understood. For example, it is well-known that mixtures are better glass-formers than monodisperse systems an… ▽ More The glass-forming ability (GFA) of alloys, colloidal dispersions, and other particulate materials, as measured by the critical cooling rate $R_c$, can span more than ten orders of magnitude. Even after numerous previous studies, the physical features that control the GFA are still not well understood. For example, it is well-known that mixtures are better glass-formers than monodisperse systems and that particle size and cohesive energy differences among constituents improve the GFA, but it is not currently known how particle size differences couple to cohesive energy differences to determine the GFA. We perform molecular dynamics simulations to determine the GFA of equimolar, binary Lennard-Jones (LJ) mixtures versus the normalized cohesive energy difference $ε_\_$ and mixing energy $\bar ε_{AB}$ between particles A and B. We find several important results. First, the $\log_{10} R_c$ contours in the $\bar ε_{AB}$-$ε_\_$ plane are ellipsoidal for all diameter ratios, and thus $R_c$ is determined by the Mahalanobis distance $d_M$ from a given point in the $\bar ε_{AB}$-$ε_\_$ plane to the center of the ellipsoidal contours. Second, LJ systems for which the larger particles have larger cohesive energy are generally better glass formers than those for which the larger particles have smaller cohesive energy. Third, $d_M(ε_\_,\bar ε_{AB})$ is determined by the relative Voronoi volume difference between particles and local chemical order $S_{AB}$, which gives the average fraction of nearest-neighbor B particles surrounding an A particle and vice-versa. In particular, the shifted Mahalanobis distance $d_M - d^0_M$ versus the shifted chemical order $S_{AB}-S_{AB}^0$ collapses onto a hyperbolic master curve for all diameter ratios. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Journal ref: Phys. Rev. Materials 6, 075601 (2022)

Core packing of well-defined x-ray and NMR structures is the same

Authors: Alex T. Grigas, Zhuoyi Liu, Lynne Regan, Corey S. O'Hern

Abstract: Numerous studies have investigated the differences and similarities between protein structures determined by solution NMR spectroscopy and those determined by x-ray crystallography. A fundamental question is whether any observed differences are due to differing methodologies, or to differences in the behavior of proteins in solution versus in the crystalline state. Here, we compare the properties… ▽ More Numerous studies have investigated the differences and similarities between protein structures determined by solution NMR spectroscopy and those determined by x-ray crystallography. A fundamental question is whether any observed differences are due to differing methodologies, or to differences in the behavior of proteins in solution versus in the crystalline state. Here, we compare the properties of the hydrophobic cores of high-resolution protein crystal structures and those in NMR structures, determined using increasing numbers and types of restraints. Prior studies have reported that many NMR structures have denser cores compared to those of high-resolution x-ray crystal structures. Our current work investigates this result in more detail, and finds that these NMR structures tend to violate basic features of protein stereochemistry, such as small non-bonded atomic overlaps and few Ramachandran and side chain dihedral angle outliers. We find that NMR structures solved with more restraints, and which do not significantly violate stereochemistry, have hydrophobic cores that have a similar size and packing fraction as their counterparts determined by x-ray crystallography at high-resolution. These results lead us to conclude that, at least regarding the core packing properties, high-quality structures determined by NMR and x-ray crystallography are the same, and the differences reported earlier are most likely a consequence of methodology, rather than fundamental differences between the protein in the two different environments. △ Less

Submitted 12 March, 2022; originally announced March 2022.

Comments: 12 pages, 6 figures

Journal ref: Protein Science 31 (2022) e4373

The structural, vibrational, and mechanical properties of jammed packings of deformable particles in three dimensions

Authors: Dong Wang, John D. Treado, Arman Boromand, Blake Norwick, Michael P. Murrell, Mark D. Shattuck, Corey S. O'Hern

Abstract: We investigate the structural, vibrational, and mechanical properties of jammed packings of deformable particles with shape degrees of freedom in three dimensions (3D). Each 3D deformable particle is modeled as a surface-triangulated polyhedron, with spherical vertices whose positions are determined by a shape-energy function with terms that constrain the particle surface area, volume, and curvatu… ▽ More We investigate the structural, vibrational, and mechanical properties of jammed packings of deformable particles with shape degrees of freedom in three dimensions (3D). Each 3D deformable particle is modeled as a surface-triangulated polyhedron, with spherical vertices whose positions are determined by a shape-energy function with terms that constrain the particle surface area, volume, and curvature, and prevent interparticle overlap. We show that jammed packings of deformable particles without bending energy possess low-frequency, quartic vibrational modes, whose number decreases with increasing asphericity and matches the number of missing contacts relative to the isostatic value. In contrast, jammed packings of deformable particles with non-zero bending energy are isostatic in 3D, with no quartic modes. We find that the contributions to the eigenmodes of the dynamical matrix from the shape degrees of freedom are significant over the full range of frequency and shape parameters for particles with zero bending energy. We further show that the ensemble-averaged shear modulus $\langle G \rangle$ scales with pressure $P$ as $\langle G \rangle \sim P^β$, with $β\approx 0.75$ for jammed packings of deformable particles with zero bending energy. In contrast, $β\approx 0.5$ for packings of deformable particles with non-zero bending energy, which matches the value for jammed packings of soft, spherical particles with fixed shape. These studies underscore the importance of incorporating particle deformability and shape change when modeling the properties of jammed soft materials. △ Less

Submitted 21 August, 2021; originally announced August 2021.

Journal ref: Soft Matter 17, 9901 (2021)

Mechanical response of packings of non-spherical particles: A case study of 2D packings of circulo-lines

Authors: J. Zhang, K. VanderWerf, C. Li, S. Zhang, M. D. Shattuck, C. S. O'Hern

Abstract: We investigate the mechanical response of jammed packings of circulo-lines, interacting via purely repulsive, linear spring forces, as a function of pressure $P$ during athermal, quasistatic isotropic compression. Prior work has shown that the ensemble-averaged shear modulus for jammed disk packings scales as a power-law, $\langle G(P) \rangle \sim P^β$, with $β\sim 0.5$, over a wide range of pres… ▽ More We investigate the mechanical response of jammed packings of circulo-lines, interacting via purely repulsive, linear spring forces, as a function of pressure $P$ during athermal, quasistatic isotropic compression. Prior work has shown that the ensemble-averaged shear modulus for jammed disk packings scales as a power-law, $\langle G(P) \rangle \sim P^β$, with $β\sim 0.5$, over a wide range of pressure. For packings of circulo-lines, we also find robust power-law scaling of $\langle G(P)\rangle$ over the same range of pressure for aspect ratios ${\cal R} \gtrsim 1.2$. However, the power-law scaling exponent $β\sim 0.8$-$0.9$ is much larger than that for jammed disk packings. To understand the origin of this behavior, we decompose $\langle G\rangle$ into separate contributions from geometrical families, $G_f$, and from changes in the interparticle contact network, $G_r$, such that $\langle G \rangle = \langle G_f\rangle + \langle G_r \rangle$. We show that the shear modulus for low-pressure geometrical families for jammed packings of circulo-lines can both increase {\it and} decrease with pressure, whereas the shear modulus for low-pressure geometrical families for jammed disk packings only decreases with pressure. For this reason, the geometrical family contribution $\langle G_f \rangle$ is much larger for jammed packings of circulo-lines than for jammed disk packings at finite pressure, causing the increase in the power-law scaling exponent. △ Less

Submitted 24 May, 2021; originally announced May 2021.

Comments: 14 pages, 10 figures

Journal ref: Phys. Rev. E 104, 014901 (2021)

Current MD forcefields fail to capture key features of protein structure and fluctuations: A case study of cyclophilin A and T4 lysozyme

Authors: Zhe Mei, Alex T. Grigas, John D. Treado, Gabriel Melendez Corres, Maisa Vuorte, Maria Sammalkorpi, Lynne Regan, Zachary A. Levine, Corey S. O'Hern

Abstract: Globular proteins undergo thermal fluctuations in solution, while maintaining an overall well-defined folded structure. In particular, studies have shown that the core structure of globular proteins differs in small, but significant ways when they are solved by x-ray crystallography versus solution-based NMR spectroscopy. Given these discrepancies, it is unclear whether molecular dynamics (MD) sim… ▽ More Globular proteins undergo thermal fluctuations in solution, while maintaining an overall well-defined folded structure. In particular, studies have shown that the core structure of globular proteins differs in small, but significant ways when they are solved by x-ray crystallography versus solution-based NMR spectroscopy. Given these discrepancies, it is unclear whether molecular dynamics (MD) simulations can accurately recapitulate protein conformations. We therefore perform extensive MD simulations across multiple force fields and sampling techniques to investigate the degree to which computer simulations can capture the ensemble of conformations observed in experiments. By analyzing fluctuations in the atomic coordinates and core packing, we show that conformations sampled in MD simulations both move away from and sample a larger conformational space than the ensemble of structures observed in NMR experiments. However, we find that adding inter-residue distance restraints that match those obtained via Nuclear Overhauser Effect measurements enables the MD simulations to sample more NMR-like conformations, though significant differences between the core packing features in restrained MD and the NMR ensemble remain. Given that the protein structures obtained from the MD simulations possess smaller and less dense protein cores compared to those solved by NMR, we suggest that future improvements to MD forcefields should aim to increase the packing of hydrophobic residues in protein cores. △ Less

Submitted 5 December, 2020; originally announced December 2020.

Comments: 17 pages, 9 figures

Bridging particle deformability and collective response in soft solids

Authors: John D. Treado, Dong Wang, Arman Boromand, Michael P. Murrell, Mark D. Shattuck, Corey S. O'Hern

Abstract: Soft, amorphous solids such as tissues, foams, and emulsions are composed of deformable particles. However, the effect of single-particle deformability on the collective behavior of soft solids is still poorly understood. We perform numerical simulations of two-dimensional jammed packings of explicitly deformable particles to study the mechanical response of model soft solids. We find that jammed… ▽ More Soft, amorphous solids such as tissues, foams, and emulsions are composed of deformable particles. However, the effect of single-particle deformability on the collective behavior of soft solids is still poorly understood. We perform numerical simulations of two-dimensional jammed packings of explicitly deformable particles to study the mechanical response of model soft solids. We find that jammed packings of deformable particles with excess shape degrees of freedom possess low-frequency quartic vibrational modes that stabilize the packings even though they possess fewer interparticle contacts than the nominal isostatic value. Adding intra-particle constraints can rigidify the particles, but these particles undergo a buckling transition and gain an effective shape degree of freedom when their preferred perimeter is above a threshold value. We find that the mechanical response of jammed packings of deformable particles with shape degrees of freedom differs significantly from that of jammed packings of rigid-shape particles, which emphasizes the importance of particle deformability in modelling soft solids. △ Less

Submitted 11 May, 2021; v1 submitted 4 December, 2020; originally announced December 2020.

Comments: 12 pages total, 6 main figures, 4 appendices, 5 appendix figures

Journal ref: Phys. Rev. Materials 5, 055605 (2021)

Shear response of granular packings compressed above jamming onset

Authors: Philip Wang, Shiyun Zhang, Philip Tuckman, Nicholas T. Ouellette, Mark D. Shattuck, Corey S. O'Hern

Abstract: We investigate the mechanical response of jammed packings of repulsive, frictionless spherical particles undergoing isotropic compression. Prior simulations of the soft-particle model, where the repulsive interactions scale as a power-law in the interparticle overlap with exponent $α$, have found that the ensemble-averaged shear modulus $\langle G \rangle$ increases with pressure $P$ as… ▽ More We investigate the mechanical response of jammed packings of repulsive, frictionless spherical particles undergoing isotropic compression. Prior simulations of the soft-particle model, where the repulsive interactions scale as a power-law in the interparticle overlap with exponent $α$, have found that the ensemble-averaged shear modulus $\langle G \rangle$ increases with pressure $P$ as $\sim P^{(α-3/2)/(α-1)}$ at large pressures. However, a deep theoretical understanding of this scaling behavior is lacking. We show that the shear modulus of jammed packings of frictionless, spherical particles has two key contributions: 1) continuous variations as a function of pressure along geometrical families, for which the interparticle contact network does not change, and 2) discontinuous jumps during compression that arise from changes in the contact network. We show that the shear modulus of the first geometrical family for jammed packings can be collapsed onto a master curve: $G^{(1)}/G_0 = (P/P_0)^{(α-2)/(α-1)} - P/P_0$, where $P_0 \sim N^{-2(α-1)}$ is a characteristic pressure that separates the two power-law scaling regions and $G_0 \sim N^{-2(α-3/2)}$. Deviations from this form can occur when there is significant non-affine particle motion near changes in the contact network. We further show that $\langle G (P)\rangle$ is not simply a sum of two power-laws, but $\langle G \rangle \sim (P/P_c)^a$, where $a \approx (α-2)/(α-1)$ in the $P \rightarrow 0$ limit and $\langle G \rangle \sim (P/P_c)^b$, where $b \gtrsim (α-3/2)/(α-1)$ above a characteristic pressure $P_c$. In addition, the magnitudes of both contributions to $\langle G\rangle$ from geometrical families and changes in the contact network remain comparable in the large-system limit for $P >P_c$. △ Less

Submitted 23 September, 2020; originally announced September 2020.

Comments: 15 pages, 19 figures

Journal ref: Phys. Rev. E 103, 022902 (2021)

Homogeneous crystallization in cyclically sheared frictionless grains

Authors: Weiwei Jin, Corey S. O'Hern, Charles Radin, Mark D. Shattuck, Harry L. Swinney

Abstract: Many experiments over the past half century have shown that, for a range of protocols, granular materials compact under pressure and repeated small disturbances. A recent experiment on cyclically sheared spherical grains showed significant compaction via homogeneous crystallization (Rietz et al., 2018). Here we present numerical simulations of frictionless, purely repulsive spheres undergoing cycl… ▽ More Many experiments over the past half century have shown that, for a range of protocols, granular materials compact under pressure and repeated small disturbances. A recent experiment on cyclically sheared spherical grains showed significant compaction via homogeneous crystallization (Rietz et al., 2018). Here we present numerical simulations of frictionless, purely repulsive spheres undergoing cyclic simple shear with dissipative Newtonian dynamics at fixed vertical load. We show that for sufficiently small strain amplitudes, cyclic shear gives rise to homogeneous crystallization at a volume fraction $φ= 0.646 \pm 0.001$. This result indicates that neither friction nor gravity is essential for homogeneous crystallization in driven granular media. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 125, 258003 (2020)

Contact network changes in ordered and disordered disk packings

Authors: P. J. Tuckman, K. VanderWerf, Y. Yuan, S. Zhang, J. Zhang, M. D. Shattuck, C. S. O'Hern

Abstract: We investigate the mechanical response of packings of purely repulsive, frictionless disks to quasistatic deformations. The deformations include simple shear strain at constant packing fraction and at constant pressure, "polydispersity" strain (in which we change the particle size distribution) at constant packing fraction and at constant pressure, and isotropic compression. For each deformation,… ▽ More We investigate the mechanical response of packings of purely repulsive, frictionless disks to quasistatic deformations. The deformations include simple shear strain at constant packing fraction and at constant pressure, "polydispersity" strain (in which we change the particle size distribution) at constant packing fraction and at constant pressure, and isotropic compression. For each deformation, we show that there are two classes of changes in the interparticle contact networks: jump changes and point changes. Jump changes occur when a contact network becomes mechanically unstable, particles "rearrange", and the potential energy (when the strain is applied at constant packing fraction) or enthalpy (when the strain is applied at constant pressure) and all derivatives are discontinuous. During point changes, a single contact is either added to or removed from the contact network. For repulsive linear spring interactions, second- and higher-order derivatives of the potential energy/enthalpy are discontinuous at a point change, while for Hertzian interactions, third- and higher-order derivatives of the potential energy/enthalpy are discontinuous. We illustrate the importance of point changes by studying the transition from a hexagonal crystal to a disordered crystal induced by applying polydispersity strain. During this transition, the system only undergoes point changes, with no jump changes. We emphasize that one must understand point changes, as well as jump changes, to predict the mechanical properties of jammed packings. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 14 pages, 4 figures

Journal ref: Soft Matter 16 (2020) 9443

Glass formation in binary alloys with different atomic symmetries

Authors: Yuan-Chao Hu, Kai Zhang, Sebastian A. Kube, Jan Schroers, Mark D. Shattuck, Corey S. O'Hern

Abstract: Prediction of the glass forming ability (GFA) of alloys remains a major challenge. We are not able to predict the composition dependence of the GFA of even binary alloys. To investigate the effect of each element's propensity to form particular crystal structures on glass formation, we focus on binary alloys composed of elements with the same size, but different atomic symmetries using the patchy-… ▽ More Prediction of the glass forming ability (GFA) of alloys remains a major challenge. We are not able to predict the composition dependence of the GFA of even binary alloys. To investigate the effect of each element's propensity to form particular crystal structures on glass formation, we focus on binary alloys composed of elements with the same size, but different atomic symmetries using the patchy-particle model. For mixtures with atomic symmetries that promote different crystal structures, the minimum critical cooling rate $R_c$ is only a factor of $5$ lower than that for the pure substances. For mixtures with different atomic symmetries that promote local crystalline and icosahedral order, the minimum $R_c$ is more than $3$ orders of magnitude lower than that for pure substances. Results for $R_c$ for the patchy-particle model are in agreement with those from embedded atom method simulations and sputtering experiments of NiCu, TiAl, and high entropy alloys. △ Less

Submitted 10 May, 2020; originally announced May 2020.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Materials 4, 105602 (2020)

Using physical features of protein core packing to distinguish real proteins from decoys

Authors: Alex T. Grigas, Zhe Mei, John D. Treado, Zachary A. Levine, Lynne Regan, Corey S. O'Hern

Abstract: The ability to consistently distinguish real protein structures from computationally generated model decoys is not yet a solved problem. One route to distinguish real protein structures from decoys is to delineate the important physical features that specify a real protein. For example, it has long been appreciated that the hydrophobic cores of proteins contribute significantly to their stability.… ▽ More The ability to consistently distinguish real protein structures from computationally generated model decoys is not yet a solved problem. One route to distinguish real protein structures from decoys is to delineate the important physical features that specify a real protein. For example, it has long been appreciated that the hydrophobic cores of proteins contribute significantly to their stability. As a dataset of decoys to compare with real protein structures, we studied submissions to the bi-annual CASP competition (specifically CASP11, 12, and 13), in which researchers attempt to predict the structure of a protein only knowing its amino acid sequence. Our analysis reveals that many of the submissions possess cores that do not recapitulate the features that define real proteins. In particular, the model structures appear more densely packed (because of energetically unfavorable atomic overlaps), contain too few residues in the core, and have improper distributions of hydrophobic residues throughout the structure. Based on these observations, we developed a deep learning method, which incorporates key physical features of protein cores, to predict how well a computational model recapitulates the real protein structure without knowledge of the structure of the target sequence. By identifying the important features of protein structure, our method is able to rank decoys from the CASP competitions equally well, if not better than, state-of-the-art methods that incorporate many additional features. △ Less

Submitted 4 January, 2020; originally announced January 2020.

Comments: 7 pages, 5 figures

Journal ref: Protein Science 29 (2020) 1931

Jammed packings of 3D superellipsoids with tunable packing fraction, contact number, and ordering

Authors: Ye Yuan, Kyle VanderWerf, Mark D. Shattuck, Corey S. O'Hern

Abstract: We carry out numerical studies of static packings of frictionless superellipsoidal particles in three spatial dimensions. We consider more than $200$ different particle shapes by varying the three shape parameters that define superellipsoids. We characterize the structural and mechanical properties of both disordered and ordered packings using two packing-generation protocols. We perform athermal… ▽ More We carry out numerical studies of static packings of frictionless superellipsoidal particles in three spatial dimensions. We consider more than $200$ different particle shapes by varying the three shape parameters that define superellipsoids. We characterize the structural and mechanical properties of both disordered and ordered packings using two packing-generation protocols. We perform athermal quasi-static compression simulations starting from either random, dilute configurations (Protocol 1) or thermalized, dense configurations (protocol $2$), which allows us to tune the orientational order of the packings. In general, we find that the contact numbers at jamming onset for superellipsoid packings are hypostatic, with $z_J < z_{\rm iso}$, where $z_{\rm iso} = 2d_f$ and $d_f = 5$ or $6$ depending on whether the particles are axi-symmetric or not. Over the full range of orientational order, we find that the number of quartic modes of the dynamical matrix for the packings always matches the number of missing contacts relative to the isostatic value. This result suggests that there are no mechanically redundant contacts for ordered, yet hypostatic packings of superellipsoidal particles. Additionally, we find that the packing fraction at jamming onset for disordered packings of superellipsoidal particles can be collapsed using two particle shape parameters, e.g. the asphericity $\mathcal{A}$ and reduced aspect ratio $β$ of the particles. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 10 pages, 14 figures

Journal ref: Soft Matter 15 (2019) 9751

Pressure-dependent shear response of jammed packings of spherical particles

Authors: Kyle VanderWerf, Arman Boromand, Mark D. Shattuck, Corey S. O'Hern

Abstract: The mechanical response of packings of purely repulsive, spherical particles to athermal, quasistatic simple shear near jamming onset is highly nonlinear. Previous studies have shown that, at small pressure $p$, the ensemble-averaged static shear modulus $\langle G-G_0 \rangle$ scales with $p^α$, where $α\approx 1$, but above a characteristic pressure $p^{**}$, $\langle G-G_0 \rangle \sim p^β$, wh… ▽ More The mechanical response of packings of purely repulsive, spherical particles to athermal, quasistatic simple shear near jamming onset is highly nonlinear. Previous studies have shown that, at small pressure $p$, the ensemble-averaged static shear modulus $\langle G-G_0 \rangle$ scales with $p^α$, where $α\approx 1$, but above a characteristic pressure $p^{**}$, $\langle G-G_0 \rangle \sim p^β$, where $β\approx 0.5$. However, we find that the shear modulus $G^i$ for an individual packing typically decreases linearly with $p$ along a geometrical family where the contact network does not change. We resolve this discrepancy by showing that, while the shear modulus does decrease linearly within geometrical families, $\langle G \rangle$ also depends on a contribution from discontinuous jumps in $\langle G \rangle$ that occur at the transitions between geometrical families. For $p > p^{**}$, geometrical-family and rearrangement contributions to $\langle G \rangle$ are of opposite signs and remain comparable for all system sizes. $\langle G \rangle$ can be described by a scaling function that smoothly transitions between the two power-law exponents $α$ and $β$. We also demonstrate the phenomenon of {\it compression unjamming}, where a jammed packing can unjam via isotropic compression. △ Less

Submitted 25 August, 2019; originally announced August 2019.

Comments: 6 pages, 4 pages

Journal ref: Phys. Rev. Lett. 124, 038004 (2020)

Analyses of protein cores reveal fundamental differences between solution and crystal structures

Authors: Zhe Mei, John D. Treado, Alex T. Grigas, Zachary A. Levine, Lynne Regan, Corey S. O'Hern

Abstract: There have been several studies suggesting that protein structures solved by NMR spectroscopy and x-ray crystallography show significant differences. To understand the origin of these differences, we assembled a database of high-quality protein structures solved by both methods. We also find significant differences between NMR and crystal structures---in the root-mean-square deviations of the C… ▽ More There have been several studies suggesting that protein structures solved by NMR spectroscopy and x-ray crystallography show significant differences. To understand the origin of these differences, we assembled a database of high-quality protein structures solved by both methods. We also find significant differences between NMR and crystal structures---in the root-mean-square deviations of the C$_α$ atomic positions, identities of core amino acids, backbone and sidechain dihedral angles, and packing fraction of core residues. In contrast to prior studies, we identify the physical basis for these differences by modelling protein cores as jammed packings of amino-acid-shaped particles. We find that we can tune the jammed packing fraction by varying the degree of thermalization used to generate the packings. For an athermal protocol, we find that the average jammed packing fraction is identical to that observed in the cores of protein structures solved by x-ray crystallography. In contrast, highly thermalized packing-generation protocols yield jammed packing fractions that are even higher than those observed in NMR structures. These results indicate that thermalized systems can pack more densely than athermal systems, which suggests a physical basis for the structural differences between protein structures solved by NMR and x-ray crystallography. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 9 pages, 4 figures

Journal ref: Proteins: Structure, Function, and Bioinformatics 88 (2020) 1154

Intrinsic dissipation mechanisms in metallic glass resonators

Authors: Meng Fan, Aya Nawano, Jan Schroers, Mark D. Shattuck, Corey S. O'Hern

Abstract: Micro- and nano-resonators have important applications including sensing, navigation, and biochemical detection. Their performance is quantified using the quality factor $Q$, which gives the ratio of the energy stored to the energy dissipated per cycle. Metallic glasses are a promising materials class for micro- and nano-scale resonators since they are amorphous and can be fabricated precisely int… ▽ More Micro- and nano-resonators have important applications including sensing, navigation, and biochemical detection. Their performance is quantified using the quality factor $Q$, which gives the ratio of the energy stored to the energy dissipated per cycle. Metallic glasses are a promising materials class for micro- and nano-scale resonators since they are amorphous and can be fabricated precisely into complex shapes on these lengthscales. To understand the intrinsic dissipation mechanisms that ultimately limit large $Q$-values in metallic glasses, we perform molecular dynamics simulations to model metallic glass resonators subjected to bending vibrations. We calculate the vibrational density of states, redistribution of energy from the fundamental mode of vibration, and $Q$ versus the kinetic energy per atom $K$ of the excitation. In the linear and nonlinear response regimes where there are no atomic rearrangements, we find that $Q \rightarrow \infty$ (since we do not consider coupling to the environment). We identify a characteristic $K_r$ above which atomic rearrangements occur, and there is significant energy leakage from the fundamental mode to higher frequencies, causing finite $Q$. Thus, $K_r$ is a critical parameter determining resonator performance. We show that $K_r$ decreases as a power-law, $K_r\sim N^{-k},$ with increasing system size $N$, where $k \approx 1.3$. We estimate the critical strain $\langle γ_r \rangle \sim 10^{-8}$ for micron-sized resonators below which atomic rearrangements do not occur, and thus large $Q$-values can be obtained when they are operated below $γ_r$. We find that $K_r$ for amorphous resonators is comparable to that for resonators with crystalline order. △ Less

Submitted 28 June, 2019; originally announced July 2019.

Comments: 12 pages, 13 figures

Journal ref: J. Chem. Phys. 151 (2019) 144506

Comparison of Shear and Compression Jammed Packings of Frictional Disks

Authors: F. Xiong, P. Wang, A. H. Clark, T. Bertrand, N. T. Ouellette, M. D. Shattuck, C. S. O'Hern

Abstract: We compare the structural and mechanical properties of mechanically stable (MS) packings of frictional disks in two spatial dimensions (2D) generated with isotropic compression and simple shear protocols from discrete element modeling (DEM) simulations. We find that the average contact number and packing fraction at jamming onset are similar (with relative deviations $< 0.5\%$) for MS packings gen… ▽ More We compare the structural and mechanical properties of mechanically stable (MS) packings of frictional disks in two spatial dimensions (2D) generated with isotropic compression and simple shear protocols from discrete element modeling (DEM) simulations. We find that the average contact number and packing fraction at jamming onset are similar (with relative deviations $< 0.5\%$) for MS packings generated via compression and shear. In contrast, the average stress anisotropy $\langle {\hat Σ}_{xy} \rangle = 0$ for MS packings generated via isotropic compression, whereas $\langle {\hat Σ}_{xy} \rangle >0$ for MS packings generated via simple shear. To investigate the difference in the stress state of MS packings, we develop packing-generation protocols to first unjam the MS packings, remove the frictional contacts, and then rejam them. Using these protocols, we are able to obtain rejammed packings with nearly identical particle positions and stress anisotropy distributions compared to the original jammed packings. However, we find that when we directly compare the original jammed packings and rejammed ones, there are finite stress anisotropy deviations $Δ{\hat Σ}_{xy}$. The deviations are smaller than the stress anisotropy fluctuations obtained by enumerating the force solutions within the null space of the contact networks generated via the DEM simulations. These results emphasize that even though the compression and shear jamming protocols generate packings with the same contact networks, there can be residual differences in the normal and tangential forces at each contact, and thus differences in the stress anisotropy. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Comments: 11 pages, 11 figures

Journal ref: Granular Matter 21 (2019) 109

The role of deformability in determining the structural and mechanical properties of bubbles and emulsions

Authors: Arman Boromand, Alexandra Signoriello, Janna Lowensohn, Carlos S. Orellana, Eric R. Weeks, Fangfu Ye, Mark D. Shattuck, Corey S. O'Hern

Abstract: We perform computational studies of jammed particle packings in two dimensions undergoing isotropic compression using the well-characterized soft particle (SP) model and the deformable particle (DP) model that we developed for compressed bubbles and emulsions. In the SP model, circular particles are allowed to overlap, generating purely repulsive forces. In the DP model, particles minimize their p… ▽ More We perform computational studies of jammed particle packings in two dimensions undergoing isotropic compression using the well-characterized soft particle (SP) model and the deformable particle (DP) model that we developed for compressed bubbles and emulsions. In the SP model, circular particles are allowed to overlap, generating purely repulsive forces. In the DP model, particles minimize their perimeter, while deforming at fixed area to avoid overlap during compression. We directly compare the structural and mechanical properties of jammed particle packings generated using the SP and DP models as a function of the true packing fraction $ρ$, instead of the reduced number density $φ$. We show that near jamming onset the excess contact number $Δz=z-z_J$ and shear modulus ${\cal G}$ scale as $Δρ^{0.5}$ in the large system limit for both the SP and DP models, where $Δρ= ρ-ρ_J$ and $z_J \approx 4$ and $ρ_J \approx 0.842$ are the values at jamming onset. $Δz$ and ${\cal G}$ for the SP and DP models begin to differ for $ρ\gtrsim 0.88$. In this regime, $Δz \sim {\cal G}$ can be described by a sum of two power-laws in $Δρ$, i.e. $Δz \sim {\cal G} \sim C_0Δρ^{0.5} +C_1Δρ^{1.0}$ to lowest order. We show that the ratio $C_1/C_0$ is much larger for the DP model compared to to that for the SP model. We also characterize the void space in jammed packings as a function of $ρ$. We find that, unlike the SP model, the DP model is able to describe the formation of Plateau borders as the system approaches $ρ= 1$. We further show that the results for $z$ and the shape factor ${\cal A}$ versus $ρ$ for the DP model agree with recent experimental studies of compressed foams and emulsions. △ Less

Submitted 16 August, 2019; v1 submitted 15 April, 2019; originally announced April 2019.

Comments: 12 pages, 11 figures, 9 main figures, and 2 supplemental figures

Journal ref: Soft Matter, 2019,15, 5854-5865

Tuning the glass-forming ability of metallic glasses through energetic frustration

Authors: Yuan-Chao Hu, Jan Schroers, Mark D. Shattuck, Corey S. O'Hern

Abstract: The design of multi-functional BMGs is limited by the lack of a quantitative understanding of the variables that control the glass-forming ability (GFA) of alloys. Both geometric frustration (e.g. differences in atomic radii) and energetic frustration (e.g. differences in the cohesive energies of the atomic species) contribute to the GFA. We perform molecular dynamics simulations of binary Lennard… ▽ More The design of multi-functional BMGs is limited by the lack of a quantitative understanding of the variables that control the glass-forming ability (GFA) of alloys. Both geometric frustration (e.g. differences in atomic radii) and energetic frustration (e.g. differences in the cohesive energies of the atomic species) contribute to the GFA. We perform molecular dynamics simulations of binary Lennard-Jones mixtures with only energetic frustration. We show that there is little correlation between the heat of mixing and critical cooling rate $R_c$, below which the system crystallizes, except that $ΔH_{\rm mix} < 0$. By removing the effects of geometric frustration, we show strong correlations between $R_c$ and the variables $ε_- = (ε_{BB}-ε_{AA})/(ε_{AA}+ε_{BB})$ and ${\overline ε}_{AB} = 2ε_{AB}/(ε_{AA}+ε_{BB})$, where $ε_{AA}$ and $ε_{BB}$ are the cohesive energies of atoms $A$ and $B$ and $ε_{AB}$ is the pair interaction between $A$ and $B$ atoms. We identify a particular $f_B$-dependent combination of $ε_-$ and ${\overline ε}_{AB}$ that collapses the data for $R_c$ over nearly $4$ orders of magnitude in cooling rate. △ Less

Submitted 10 April, 2019; originally announced April 2019.

Journal ref: Phys. Rev. Materials 3, 085602 (2019)

Active acoustic switches using 2D granular crystals

Authors: Qikai Wu, Chunyang Cui, Thibault Bertrand, Mark D. Shattuck, Corey S. O'Hern

Abstract: We employ numerical simulations to study active transistor-like switches made from two-dimensional (2D) granular crystals containing two types of grains with the same size, but different masses. We tune the mass contrast and arrangement of the grains to maximize the width of the frequency band gap in the device. The input signal is applied to a single grain on one side of the device, and the outpu… ▽ More We employ numerical simulations to study active transistor-like switches made from two-dimensional (2D) granular crystals containing two types of grains with the same size, but different masses. We tune the mass contrast and arrangement of the grains to maximize the width of the frequency band gap in the device. The input signal is applied to a single grain on one side of the device, and the output signal is measured from another grain on the other side of the device. Changing the size of one or many grains tunes the pressure, which controls the vibrational response of the device. Switching between the on and off states is achieved using two mechanisms: 1) pressure-induced switching where the interparticle contact network is the same in the on and off states, and 2) switching through contact breaking. In general, the performance of the acoustic switch, as captured by the gain ratio and switching time between the on and off states, is better for pressure-induced switching. We show that in these acoustic switches the gain ratio between the on and off states can be larger than $10^4$ and the switching time (multiplied by the driving frequency) is comparable to that obtained recently for sonic crystals and less than that for photonic transistor-like switches. Since the self-assembly of grains with different masses into 2D granular crystals is challenging, we describe simulations of circular grains with small circular knobs placed symmetrically around the perimeter mixed with circular grains without knobs. Using umbrella sampling techniques, we show that devices with grains with $3$ knobs most efficiently form the hexagonal crystals that yield the largest band gap. △ Less

Submitted 6 February, 2019; originally announced February 2019.

Comments: 16 pages, 23 figures

Journal ref: Phys. Rev. E 99, 062901 (2019)

Void distributions reveal structural link between jammed packings and protein cores

Authors: John D. Treado, Zhe Mei, Lynne Regan, Corey S. O'Hern

Abstract: Dense packing of hydrophobic residues in the cores of globular proteins determines their stability. Recently, we have shown that protein cores possess packing fraction $φ\approx 0.56$, which is the same as dense, random packing of amino acid-shaped particles. In this article, we compare the structural properties of protein cores and jammed packings of amino acid-shaped particles in much greater de… ▽ More Dense packing of hydrophobic residues in the cores of globular proteins determines their stability. Recently, we have shown that protein cores possess packing fraction $φ\approx 0.56$, which is the same as dense, random packing of amino acid-shaped particles. In this article, we compare the structural properties of protein cores and jammed packings of amino acid-shaped particles in much greater depth by measuring their local and connected void regions. We find that the distributions of surface Voronoi cell volumes and local porosities obey similar statistics in both systems. We also measure the probability that accessible, connected void regions percolate as a function of the size of a spherical probe particle and show that both systems possess the same critical probe size. By measuring the critical exponent $τ$ that characterizes the size distribution of connected void clusters at the onset of percolation, we show that void percolation in packings of amino acid-shaped particles and protein cores belong to the same universality class, which is different from that for void percolation in jammed sphere packings. We propose that the connected void regions of proteins are a defining feature of proteins and can be used to differentiate experimentally observed proteins from decoy structures that are generated using computational protein design software. This work emphasizes that jammed packings of amino acid-shaped particles can serve as structural and mechanical analogs of protein cores, and could therefore be useful in modeling the response of protein cores to cavity-expanding and -reducing mutations. △ Less

Submitted 31 October, 2018; originally announced November 2018.

Comments: 14 pages, 11 figures

Journal ref: Phys. Rev. E 99, 022416 (2019)

Stress anisotropy in shear-jammed packings of frictionless disks

Authors: Sheng Chen, Weiwei Jin, Thibault Bertrand, Mark D. Shattuck, Corey S. O'Hern

Abstract: We perform computational studies of repulsive, frictionless disks to investigate the development of stress anisotropy in mechanically stable (MS) packings. We focus on two protocols for generating MS packings: 1) isotropic compression and 2) applied simple or pure shear strain $γ$ at fixed packing fraction $φ$. MS packings of frictionless disks occur as geometric families (i.e. parabolic segments… ▽ More We perform computational studies of repulsive, frictionless disks to investigate the development of stress anisotropy in mechanically stable (MS) packings. We focus on two protocols for generating MS packings: 1) isotropic compression and 2) applied simple or pure shear strain $γ$ at fixed packing fraction $φ$. MS packings of frictionless disks occur as geometric families (i.e. parabolic segments with positive curvature) in the $φ$-$γ$ plane. MS packings from protocol 1 populate parabolic segments with both signs of the slope, $dφ/dγ>0$ and $dφ/dγ<0$. In contrast, MS packings from protocol 2 populate segments with $dφ/dγ<0$ only. For both simple and pure shear, we derive a relationship between the stress anisotropy and dilatancy $dφ/dγ$ obeyed by MS packings along geometrical families. We show that for MS packings prepared using isotropic compression, the stress anisotropy distribution is Gaussian centered at zero with a standard deviation that decreases with increasing system size. For shear jammed MS packings, the stress anisotropy distribution is a convolution of Weibull distributions that depend on strain, which has a nonzero average and standard deviation in the large-system limit. We also develop a framework to calculate the stress anisotropy distribution for packings generated via protocol 2 in terms of the stress anisotropy distribution for packings generated via protocol 1. These results emphasize that for repulsive frictionless disks, different packing-generation protocols give rise to different MS packing probabilities, which lead to differences in macroscopic properties of MS packings. △ Less

Submitted 12 June, 2018; v1 submitted 29 April, 2018; originally announced April 2018.

Comments: 1. change the vertical axis label in Fig. 7 (b), fix the Eq. 13 in the revised manuscript; 2. Add new results of pure shear case in Appendix A; 3. page 3, fix typos, use d$φ$ in the revised manuscript.; 4. define the pure shear strain as $γ=\ln (Lx'/Ly')$, which makes the relationship between the components of the stress tensor and dilatancy for simple and pure shear the same;

Journal ref: Phys. Rev. E 98, 042906 (2018)

Jamming of Deformable Polygons

Authors: Arman Boromand, Alexandra Signoriello, Fangfu Ye, Corey S. O'Hern, Mark D. Shattuck

Abstract: There are two main classes of physics-based models for two-dimensional cellular materials: packings of repulsive disks and the vertex model. These models have several disadvantages. For example, disk interactions are typically a function of particle overlap, yet the model assumes that the disks remain circular during overlap. The shapes of the cells can vary in the vertex model, however, the packi… ▽ More There are two main classes of physics-based models for two-dimensional cellular materials: packings of repulsive disks and the vertex model. These models have several disadvantages. For example, disk interactions are typically a function of particle overlap, yet the model assumes that the disks remain circular during overlap. The shapes of the cells can vary in the vertex model, however, the packing fraction is fixed at $φ=1$. Here, we describe the deformable particle model (DPM), where each particle is a polygon composed of a large number of vertices. The total energy includes three terms: two quadratic terms to penalize deviations from the preferred particle area $a_0$ and perimeter $p_0$ and a repulsive interaction between DPM polygons that penalizes overlaps. We performed simulations to study the onset of jamming in packings of DPM polygons as a function of asphericity, ${\cal A} = p_0^2/4πa_0$. We show that the packing fraction at jamming onset $φ_J({\cal A})$ grows with increasing ${\cal A}$, reaching confluence at ${\cal A} \approx 1.16$. ${\cal A}^*$ corresponds to the value at which DPM polygons completely fill the cells obtained from a surface-Voronoi tessellation. Further, we show that DPM polygons develop invaginations for ${\cal A} > {\cal A}^*$ with excess perimeter that grows linearly with ${\cal A}-{\cal A}^*$. We confirm that packings of DPM polygons are solid-like over the full range of ${\cal A}$ by showing that the shear modulus is nonzero. △ Less

Submitted 16 February, 2018; v1 submitted 18 January, 2018; originally announced January 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Lett. 121, 248003 (2018)

Hypostatic jammed packings of frictionless nonspherical particles

Authors: Kyle VanderWerf, Weiwei Jin, Mark D. Shattuck, Corey S. O'Hern

Abstract: We perform computational studies of static packings of a variety of nonspherical particles including circulo-lines, circulo-polygons, ellipses, asymmetric dimers, and dumbbells to determine which shapes form hypostatic versus isostatic packings and to understand why hypostatic packings of nonspherical particles can be mechanically stable despite having fewer contacts than that predicted from naïve… ▽ More We perform computational studies of static packings of a variety of nonspherical particles including circulo-lines, circulo-polygons, ellipses, asymmetric dimers, and dumbbells to determine which shapes form hypostatic versus isostatic packings and to understand why hypostatic packings of nonspherical particles can be mechanically stable despite having fewer contacts than that predicted from naïve constraint counting. To generate highly accurate force- and torque-balanced packings of circulo-lines and -polygons, we developed an interparticle potential that gives continuous forces and torques as a function of the particle coordinates. We show that the packing fraction and coordination number at jamming onset obey a master-like form for all of the nonspherical particle packings we studied when plotted versus the particle asphericity ${\cal A}$, which is proportional to the ratio of the squared perimeter to the area of the particle. Further, the eigenvalue spectra of the dynamical matrix for packings of different particle shapes collapse when plotted at the same ${\cal A}$. For hypostatic packings of nonspherical particles, we verify that the number of "quartic" modes along which the potential energy increases as the fourth power of the perturbation amplitude matches the number of missing contacts relative to the isostatic value. In addition, we calculate the principal curvatures of the inequality constraints for each contact in circulo-line packings and identify specific types of contacts with inequality constraints that possess convex curvature. These contacts can constrain multiple degrees of freedom and allow hypostatic packings of nonspherical particles to be mechanically stable. △ Less

Submitted 25 November, 2017; originally announced November 2017.

Comments: 17 pages, 22 figures

Journal ref: Phys. Rev. E 97, 012909 (2018)

The response of jammed packings to thermal fluctuations

Authors: Q. Wu, T. Bertrand, M. D. Shattuck, C. S. O'Hern

Abstract: We focus on the response of mechanically stable (MS) packings of frictionless, bidisperse disks to thermal fluctuations, with the aim of quantifying how nonlinearities affect system properties at finite temperature. Packings of disks with purely repulsive contact interactions possess two main types of nonlinearities, one from the form of the interaction potential and one from the breaking (or form… ▽ More We focus on the response of mechanically stable (MS) packings of frictionless, bidisperse disks to thermal fluctuations, with the aim of quantifying how nonlinearities affect system properties at finite temperature. Packings of disks with purely repulsive contact interactions possess two main types of nonlinearities, one from the form of the interaction potential and one from the breaking (or forming) of interparticle contacts. To identify the temperature regime at which the contact-breaking nonlinearities begin to contribute, we first calculated the minimum temperatures $T_{cb}$ required to break a single contact in the MS packing for both single and multiple eigenmode perturbations of the $T=0$ MS packing. We then studied deviations in the constant volume specific heat $C_V$ and deviations of the average disk positions $Δr$ from their $T=0$ values in the temperature regime $T_{cb} < T < T_{r}$, where $T_r$ is the temperature beyond which the system samples the basin of a new MS packing. We find that the deviation in the specific heat per particle $Δ{\overline C}_V^0/{\overline C}_V^0$ relative to the zero temperature value ${\overline C}_V^0$ can grow rapidly above $T_{cb}$, however, the deviation $Δ{\overline C}_V^0/{\overline C}_V^0$ decreases as $N^{-1}$ with increasing system size. To characterize the relative strength of contact-breaking versus form nonlinearities, we measured the ratio of the average position deviations $Δr^{ss}/Δr^{ds}$ for single- and double-sided linear and nonlinear spring interactions. We find that $Δr^{ss}/Δr^{ds} > 100$ for linear spring interactions and is independent of system size. △ Less

Submitted 3 October, 2017; originally announced October 2017.

Comments: 15 pages, 13 figures

Journal ref: Phys. Rev. E 96, 062902 (2017)

Local and global avalanches in a 2D sheared granular medium

Authors: Jonathan Barés, Dengming Wang, Dong Wang, Thibault Bertrand, Corey S. O'Hern, Robert P. Behringer

Abstract: We present the experimental and numerical studies of a 2D sheared amorphous material constituted of bidisperse photo-elastic disks. We analyze the statistics of avalanches during shear including the local and global fluctuations in energy and changes in particle positions and orientations. We find scale free distributions for these global and local avalanches denoted by power-laws whose cut-offs v… ▽ More We present the experimental and numerical studies of a 2D sheared amorphous material constituted of bidisperse photo-elastic disks. We analyze the statistics of avalanches during shear including the local and global fluctuations in energy and changes in particle positions and orientations. We find scale free distributions for these global and local avalanches denoted by power-laws whose cut-offs vary with inter-particle friction and packing fraction. Different exponents are found for these power-laws depending on the quantity from which variations are extracted. An asymmetry in time of the avalanche shapes is evidenced along with the fact that avalanches are mainly triggered from the shear bands. A simple relation independent from the intensity, is found between the number of local avalanches and the global avalanches they form. We also compare these experimental and numerical results for both local and global fluctuations to predictions from meanfield and depinning theories. △ Less

Submitted 4 September, 2017; originally announced September 2017.

Journal ref: Phys. Rev. E 96, 052902 (2017)

Determining the Onset of Hydrodynamic Erosion in Turbulent Flow

Authors: J. C. Salevan, Abram H. Clark, Mark D. Shattuck, Corey S. O'Hern, Nicholas T. Ouellette

Abstract: We revisit the longstanding question of the onset of sediment transport driven by a turbulent fluid flow via laboratory measurements. We use particle tracking velocimetry to quantify the fluid flow as well as the motion of individual grains. As we increase the flow speed above the transition to sediment transport, we observe that an increasing fraction of grains are transported downstream, althoug… ▽ More We revisit the longstanding question of the onset of sediment transport driven by a turbulent fluid flow via laboratory measurements. We use particle tracking velocimetry to quantify the fluid flow as well as the motion of individual grains. As we increase the flow speed above the transition to sediment transport, we observe that an increasing fraction of grains are transported downstream, although the average downstream velocity of the transported grains remains roughly constant. However, we find that the fraction of mobilized grains does not vanish sharply at a critical flow rate. Additionally, the distribution of the fluctuating velocities of non-transported grains becomes broader with heavier tails, meaning that unambiguously separating mobile and static grains is not possible. As an alternative approach, we quantify the statistics of grain velocities by using a mixture model consisting of two forms for the grain velocities: a decaying-exponential tail, which represents grains transported downstream, and a peaked distribution centered at zero velocity, which represents grains that fluctuate due to the turbulent flow but remain in place. Our results suggest that more sophisticated statistical measures may be required to quantify grain motion near the onset of sediment transport, particularly in the presence of turbulence. △ Less

Submitted 5 July, 2017; originally announced July 2017.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. Fluids 2, 114302 (2017)