-
Variable Frequency Pulse Generation from Breathers in Josephson Transmission Lines
Authors:
Gregory Cunningham,
Yufeng Ye,
Kaidong Peng,
Alec Yen,
Jessica Kedziora,
Kevin P. O'Brien
Abstract:
Single flux quantum technology has the potential to enhance readout and control of superconducting quantum systems due to their low energy consumption, high speed, and cryogenic operating temperatures. Current cryogenic readout and control typically requires microwave pulses of specific frequencies to travel between the room temperature control electronics and the cryogenic setup. Latency in contr…
▽ More
Single flux quantum technology has the potential to enhance readout and control of superconducting quantum systems due to their low energy consumption, high speed, and cryogenic operating temperatures. Current cryogenic readout and control typically requires microwave pulses of specific frequencies to travel between the room temperature control electronics and the cryogenic setup. Latency in control and readout can be improved by generating pulses within the dilution refrigerator. In this work, we consider a protocol for generating gigahertz frequency microwave tones from trains of DC-centered fluxons and fluxoids in Josephson transmission lines using the dynamics of breather formation, without room temperature synthesis or shunt / bias resistors. Simulations show that pulses with frequencies in the range of 15.2 to 21.5 GHz can be generated with maximal energy efficiency of 97% and bandwidth from 40 to 365 MHz. This protocol can also be used to generate gigahertz frequency Gaussian pulses. We detail metrics relevant to the control and readout of quantum systems such as input power, output power, and footprint.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
High-Efficiency, Low-Loss Floquet-mode Traveling Wave Parametric Amplifier
Authors:
Jennifer Wang,
Kaidong Peng,
Jeffrey M. Knecht,
Gregory D. Cunningham,
Andres E. Lombo,
Alec Yen,
Daniela A. Zaidenberg,
Michael Gingras,
Bethany M. Niedzielski,
Hannah Stickler,
Katrina Sliwa,
Kyle Serniak,
Mollie E. Schwartz,
William D. Oliver,
Kevin P. O'Brien
Abstract:
Advancing fault-tolerant quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions typically achieve one at the expense of the other. In this work, we experimentally demonstrate the first Floquet-mode traveling-wave parametric amplifier (Floquet TWPA), which achieves nearly quantum-l…
▽ More
Advancing fault-tolerant quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions typically achieve one at the expense of the other. In this work, we experimentally demonstrate the first Floquet-mode traveling-wave parametric amplifier (Floquet TWPA), which achieves nearly quantum-limited noise performance, minimal dissipation, and broadband operation, breaking the presumption that broadband amplifiers introduce higher noise. We achieve a system measurement efficiency of $65.1\pm5.8\%$ when measuring a superconducting qubit, which to our knowledge is the highest-reported in a superconducting qubit readout experiment utilizing phase-preserving amplifiers. Our device exhibits $>20$-dB amplification over a $3$-GHz instantaneous bandwidth, $<\!0.5\,$-dB average in-band insertion loss, and the highest reported intrinsic quantum efficiency for a TWPA of $92.1\pm7.6\%$, relative to an ideal phase-preserving amplifier. Fabricated in a superconducting qubit process, these general-purpose Floquet TWPAs are suitable for fast, high-fidelity multiplexed readout in large-scale quantum systems and future monolithic integration with quantum processors.
△ Less
Submitted 15 April, 2025; v1 submitted 14 March, 2025;
originally announced March 2025.
-
Modeling flux tunability in Josephson Traveling Wave Parametric Amplifiers with an open-source frequency-domain simulator
Authors:
A. Levochkina,
I. Chatterjee,
P. Darvehi,
H. G. Ahmad,
P. Mastrovito,
D. Massarotti,
D. Montemurro,
F. Tafuri,
G. P. Pepe,
Kevin P. O'Brien,
M. Esposito
Abstract:
Josephson Traveling Wave Parametric Amplifiers (JTWPAs) are integral parts of many experiments carried out in quantum technologies. Being composed of hundreds of Josephson junction-based unit cells, such devices exhibit complex nonlinear behavior that typically cannot be fully explained with simple analytical models, thus necessitating the use of numerical simulators. A very useful characteristic…
▽ More
Josephson Traveling Wave Parametric Amplifiers (JTWPAs) are integral parts of many experiments carried out in quantum technologies. Being composed of hundreds of Josephson junction-based unit cells, such devices exhibit complex nonlinear behavior that typically cannot be fully explained with simple analytical models, thus necessitating the use of numerical simulators. A very useful characteristic of JTWPAs is the possibility of being biased by an external magnetic flux, allowing insitu control of the nonlinearity. It is therefore very desirable for numerical simulators to support this feature. Open-source numerical tools that allow to model JTWPA flux biasing, such as WRSPICE or PSCAN2, are based on time-domain approaches,which typically require long simulation times to get accurate results. In this work, we model the gain performance in a prototypical flux-tunable JTWPA by using JosephsonCircuits.jl,a recently developed frequency-domain open-source numerical simulator, which has the benefit of simulation times about 10,000 faster than time-domain methods. By comparing the numerical and experimental results, we validate this approach for modeling the flux dependent behavior of JTWPAs.
△ Less
Submitted 30 August, 2024;
originally announced August 2024.
-
Interferometric Purcell suppression of spontaneous emission in a superconducting qubit
Authors:
Alec Yen,
Yufeng Ye,
Kaidong Peng,
Jennifer Wang,
Gregory Cunningham,
Michael Gingras,
Bethany M. Niedzielski,
Hannah Stickler,
Kyle Serniak,
Mollie E. Schwartz,
Kevin P. O'Brien
Abstract:
In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediated decay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This "interferometric Purcell filter" does not…
▽ More
In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediated decay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This "interferometric Purcell filter" does not require dedicated filter components or impedance mismatch in the feedline, making it suitable for applications such as all-pass readout. We design and fabricate a device with the proposed scheme and demonstrate suppression of resonator-mediated decay that exceeds 2 orders of magnitude over a bandwidth of 400 MHz for a resonator linewidth of 13.8 MHz.
△ Less
Submitted 21 April, 2025; v1 submitted 16 May, 2024;
originally announced May 2024.
-
Near-ultrastrong nonlinear light-matter coupling in superconducting circuits
Authors:
Yufeng Ye,
Jeremy B. Kline,
Alec Yen,
Gregory Cunningham,
Max Tan,
Alicia Zang,
Michael Gingras,
Bethany M. Niedzielski,
Hannah Stickler,
Kyle Serniak,
Mollie E. Schwartz,
Kevin P. O'Brien
Abstract:
The interaction between an atom and an electromagnetic mode of a resonator is of both fundamental interest and is ubiquitous in quantum technologies. Most prior work studies a linear light-matter coupling of the form $g \widehatσ_x (\widehat{a} + \widehat{a}^\dagger)$, where $g$ measured relative to photonic ($ω_a$) and atomic ($ω_b$) mode frequencies can reach the ultrastrong regime (…
▽ More
The interaction between an atom and an electromagnetic mode of a resonator is of both fundamental interest and is ubiquitous in quantum technologies. Most prior work studies a linear light-matter coupling of the form $g \widehatσ_x (\widehat{a} + \widehat{a}^\dagger)$, where $g$ measured relative to photonic ($ω_a$) and atomic ($ω_b$) mode frequencies can reach the ultrastrong regime ($g/ω_{a}\!>\!10^{-1}$). In contrast, a nonlinear light-matter coupling of the form $\fracχ{2} \widehatσ_z \widehat{a}^\dagger \widehat{a}$ has the advantage of commuting with the atomic $\widehatσ_z$ and photonic $\widehat{a}^\dagger\widehat{a}$ Hamiltonian, allowing for fundamental operations such as quantum-non-demolition measurement. However, due to the perturbative nature of nonlinear coupling, the state-of-the-art $χ/\text{max}(ω_a, ω_b)$ is limited to $\!<\!10^{-2}$. Here, we use a superconducting circuit architecture featuring a quarton coupler to experimentally demonstrate, for the first time, a near-ultrastrong $χ/\text{max}(ω_a, ω_b)= (4.852\pm0.006)\times10^{-2}$ nonlinear coupling of a superconducting artificial atom and a nearly-linear resonator. We also show signatures of light-light nonlinear coupling ($χ\widehat{a}^\dagger\widehat{a}\widehat{b}^\dagger\widehat{b}$), and $χ/2π= 580.3 \pm 0.4 $ MHz matter-matter nonlinear coupling ($\fracχ{4}\widehatσ_{z,a}\widehatσ_{z,b}$) which represents the largest reported $ZZ$ interaction between two coherent qubits. Such advances in the nonlinear coupling strength of light, matter modes enable new physical regimes and could lead to applications such as orders of magnitude faster qubit readout and gates.
△ Less
Submitted 2 May, 2024; v1 submitted 29 April, 2024;
originally announced April 2024.
-
Directional emission of a readout resonator for qubit measurement
Authors:
Alec Yen,
Yufeng Ye,
Kaidong Peng,
Jennifer Wang,
Gregory Cunningham,
Michael Gingras,
Bethany M. Niedzielski,
Hannah Stickler,
Kyle Serniak,
Mollie E. Schwartz,
Kevin P. O'Brien
Abstract:
We propose and demonstrate transmission-based dispersive readout of a superconducting qubit using an all-pass resonator, which preferentially emits readout photons toward the output. This is in contrast to typical readout schemes, which intentionally mismatch the feedline at one end so that the readout signal preferentially decays toward the output. We show that this intentional mismatch creates s…
▽ More
We propose and demonstrate transmission-based dispersive readout of a superconducting qubit using an all-pass resonator, which preferentially emits readout photons toward the output. This is in contrast to typical readout schemes, which intentionally mismatch the feedline at one end so that the readout signal preferentially decays toward the output. We show that this intentional mismatch creates scaling challenges, including larger spread of effective resonator linewidths due to non-ideal impedance environments and added infrastructure for impedance matching. A future architecture using multiplexed all-pass readout resonators would avoid the need for intentional mismatch and potentially improve the scaling prospects of quantum computers. As a proof-of-concept demonstration of "all-pass readout," we design and fabricate an all-pass readout resonator that demonstrates insertion loss below 1.17 dB at the readout frequency and a maximum insertion loss of 1.53 dB across its full bandwidth for the lowest three states of a transmon qubit. We demonstrate qubit readout with an average single-shot fidelity of 98.1% in 600 ns; to assess the effect of larger dispersive shift, we implement a shelving protocol and achieve a fidelity of 99.0% in 300 ns.
△ Less
Submitted 17 September, 2024; v1 submitted 2 March, 2024;
originally announced March 2024.
-
Ultrafast Superconducting Qubit Readout with the Quarton Coupler
Authors:
Yufeng Ye,
Jeremy B. Kline,
Sean Chen,
Kevin P. O'Brien
Abstract:
Fast, high-fidelity, and quantum nondemolition (QND) qubit readout is an essential element of quantum information processing. For superconducting qubits, state-of-the-art readout is based on a dispersive cross-Kerr coupling between a qubit and its readout resonator. The resulting readout can be high-fidelity and QND, but readout times are currently limited to the order of 50 ns due to the dispersi…
▽ More
Fast, high-fidelity, and quantum nondemolition (QND) qubit readout is an essential element of quantum information processing. For superconducting qubits, state-of-the-art readout is based on a dispersive cross-Kerr coupling between a qubit and its readout resonator. The resulting readout can be high-fidelity and QND, but readout times are currently limited to the order of 50 ns due to the dispersive cross-Kerr of magnitude 10 MHz. Here, we present a new readout scheme that uses the quarton coupler to facilitate a large (greater than 250 MHz) cross-Kerr between a transmon qubit and its readout resonator. Full master equation simulations show a 5 ns readout time with greater than 99% readout and QND fidelity. Unlike state-of-the-art dispersive readout, the proposed "quartonic readout" scheme relies on a transmon with linearized transitions as the readout resonator. Such operational points are found from a detailed theoretical treatment and parameter study of the coupled system. The quartonic readout circuit is also experimentally feasible and preserves the coherence properties of the qubit. Our work reveals a new path for order-of-magnitude improvements of superconducting qubit readout by engineering nonlinear light-matter couplings in parameter regimes unreachable by existing designs.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
X-parameter based design and simulation of Josephson traveling-wave parametric amplifiers for quantum computing applications
Authors:
Kaidong Peng,
Rick Poore,
Philip Krantz,
David E. Root,
Kevin P. O'Brien
Abstract:
We present an efficient, accurate, and comprehensive analysis framework for generic, multi-port nonlinear parametric circuits, in the presence of dissipation from lossy circuit components, based on "quantum-adapted" X-parameters. We apply this method to Josephson traveling-wave parametric amplifiers (JTWPAs) - a key component in superconducting and spin qubit quantum computing architectures - whic…
▽ More
We present an efficient, accurate, and comprehensive analysis framework for generic, multi-port nonlinear parametric circuits, in the presence of dissipation from lossy circuit components, based on "quantum-adapted" X-parameters. We apply this method to Josephson traveling-wave parametric amplifiers (JTWPAs) - a key component in superconducting and spin qubit quantum computing architectures - which are challenging to model accurately due to their thousands of linear and nonlinear circuit components. X-parameters are generated from a harmonic balance solution of the classical nonlinear circuit and then mapped to the field ladder operator basis, so that the energy associated with each of the multiple interacting modes corresponds to photon occupancy, rather than classical power waves. Explicit relations for the quantum efficiency of a generic, multi-port, multi-frequency parametric circuit are presented and evaluated for two distinct JTWPA designs. The gain and quantum efficiency are consistent with those obtained from Fourier analysis of time-domain solutions, but with enhanced accuracy, speed, and the ability to include real-world impairments, statistical variations, parasitic effects, and impedance mismatches (in- and out-of-band) seamlessly. The unified flow is implemented in Keysight's PathWave Advanced Design System (ADS) and independently in an open-source simulation code, JosephsonCircuits.jl, from the MIT authors.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Broadband Squeezed Microwaves and Amplification with a Josephson Traveling-Wave Parametric Amplifier
Authors:
Jack Y. Qiu,
Arne Grimsmo,
Kaidong Peng,
Bharath Kannan,
Benjamin Lienhard,
Youngkyu Sung,
Philip Krantz,
Vladimir Bolkhovsky,
Greg Calusine,
David Kim,
Alex Melville,
Bethany M. Niedzielski,
Jonilyn Yoder,
Mollie E. Schwartz,
Terry P. Orlando,
Irfan Siddiqi,
Simon Gustavsson,
Kevin P. O'Brien,
William D. Oliver
Abstract:
Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth a…
▽ More
Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth and low dynamic range. In this work, we develop a dual-pump, broadband Josephson traveling-wave parametric amplifier that combines a phase-sensitive extinction ratio of 56 dB with single-mode squeezing on par with the best resonator-based squeezers. We also demonstrate two-mode squeezing at microwave frequencies with bandwidth in the gigahertz range that is almost two orders of magnitude wider than that of contemporary resonator-based squeezers. Our amplifier is capable of simultaneously creating entangled microwave photon pairs with large frequency separation, with potential applications including high-fidelity qubit readout, quantum illumination and teleportation.
△ Less
Submitted 15 February, 2023; v1 submitted 26 January, 2022;
originally announced January 2022.
-
Monitoring fast superconducting qubit dynamics using a neural network
Authors:
G. Koolstra,
N. Stevenson,
S. Barzili,
L. Burns,
K. Siva,
S. Greenfield,
W. Livingston,
A. Hashim,
R. K. Naik,
J. M. Kreikebaum,
K. P. O'Brien,
D. I. Santiago,
J. Dressel,
I. Siddiqi
Abstract:
Weak measurements of a superconducting qubit produce noisy voltage signals that are weakly correlated with the qubit state. To recover individual quantum trajectories from these noisy signals, traditional methods require slow qubit dynamics and substantial prior information in the form of calibration experiments. Monitoring rapid qubit dynamics, e.g. during quantum gates, requires more complicated…
▽ More
Weak measurements of a superconducting qubit produce noisy voltage signals that are weakly correlated with the qubit state. To recover individual quantum trajectories from these noisy signals, traditional methods require slow qubit dynamics and substantial prior information in the form of calibration experiments. Monitoring rapid qubit dynamics, e.g. during quantum gates, requires more complicated methods with increased demand for prior information. Here, we experimentally demonstrate an alternative method for accurately tracking rapidly driven superconducting qubit trajectories that uses a Long-Short Term Memory (LSTM) artificial neural network with minimal prior information. Despite few training assumptions, the LSTM produces trajectories that include qubit-readout resonator correlations due to a finite detection bandwidth. In addition to revealing rotated measurement eigenstates and a reduced measurement rate in agreement with theory for a fixed drive, the trained LSTM also correctly reconstructs evolution for an unknown drive with rapid modulation. Our work enables new applications of weak measurements with faster or initially unknown qubit dynamics, such as the diagnosis of coherent errors in quantum gates.
△ Less
Submitted 21 April, 2022; v1 submitted 26 August, 2021;
originally announced August 2021.
-
Leveraging Randomized Compiling for the QITE Algorithm
Authors:
Jean-Loup Ville,
Alexis Morvan,
Akel Hashim,
Ravi K. Naik,
Marie Lu,
Bradley Mitchell,
John-Mark Kreikebaum,
Kevin P. O'Brien,
Joel J. Wallman,
Ian Hincks,
Joseph Emerson,
Ethan Smith,
Ed Younis,
Costin Iancu,
David I. Santiago,
Irfan Siddiqi
Abstract:
The success of the current generation of Noisy Intermediate-Scale Quantum (NISQ) hardware shows that quantum hardware may be able to tackle complex problems even without error correction. One outstanding issue is that of coherent errors arising from the increased complexity of these devices. These errors can accumulate through a circuit, making their impact on algorithms hard to predict and mitiga…
▽ More
The success of the current generation of Noisy Intermediate-Scale Quantum (NISQ) hardware shows that quantum hardware may be able to tackle complex problems even without error correction. One outstanding issue is that of coherent errors arising from the increased complexity of these devices. These errors can accumulate through a circuit, making their impact on algorithms hard to predict and mitigate. Iterative algorithms like Quantum Imaginary Time Evolution are susceptible to these errors. This article presents the combination of both noise tailoring using Randomized Compiling and error mitigation with a purification. We also show that Cycle Benchmarking gives an estimate of the reliability of the purification. We apply this method to the Quantum Imaginary Time Evolution of a Transverse Field Ising Model and report an energy estimation and a ground state infidelity both below 1\%. Our methodology is general and can be used for other algorithms and platforms. We show how combining noise tailoring and error mitigation will push forward the performance of NISQ devices.
△ Less
Submitted 26 October, 2021; v1 submitted 18 April, 2021;
originally announced April 2021.
-
Floquet-Mode Traveling-Wave Parametric Amplifiers
Authors:
Kaidong Peng,
Mahdi Naghiloo,
Jennifer Wang,
Gregory D Cunningham,
Yufeng Ye,
Kevin P O'Brien
Abstract:
Simultaneous ideal quantum measurements of multiple single-photon-level signals would advance applications in quantum information processing, metrology, and astronomy, but require the first amplifier to be simultaneously broadband, quantum limited, and directional. However, conventional traveling-wave parametric amplifiers support broadband amplification at the cost of increased added noise and ar…
▽ More
Simultaneous ideal quantum measurements of multiple single-photon-level signals would advance applications in quantum information processing, metrology, and astronomy, but require the first amplifier to be simultaneously broadband, quantum limited, and directional. However, conventional traveling-wave parametric amplifiers support broadband amplification at the cost of increased added noise and are not genuinely directional due to non-negligible nonlinear backward wave generation. In this work, we introduce a new class of amplifiers which encode the information in the Floquet modes of the system. Such Floquet mode amplifiers prevent information leakage and overcome the trade-off between quantum efficiency (QE) and bandwidth. Crucially, Floquet mode amplifiers strongly suppress the nonlinear forward-backward wave coupling and are therefore genuinely directional and readily integrable with qubits, clearing another major obstacle towards broadband ideal quantum measurements. Furthermore, Floquet mode amplifiers are insensitive to out-of-band impedance mismatch, which otherwise may lead to gain ripples, parametric oscillations, and instability in conventional traveling-wave parametric amplifiers. Finally, we show that a Floquet mode Josephson traveling-wave parametric amplifier implementation can simultaneously achieve $>\!20\,$dB gain and a QE of $η/η_{\mathrm{ideal}}\!> 99.9\%$ of the quantum limit over more than an octave of bandwidth. The proposed Floquet scheme is also widely applicable to other platforms, such as kinetic inductance traveling-wave amplifiers and optical parametric amplifiers.
△ Less
Submitted 13 April, 2022; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Broadband Microwave Isolation with Adiabatic Mode Conversion in Coupled Superconducting Transmission Lines
Authors:
Mahdi Naghiloo,
Kaidong Peng,
Yufeng Ye,
Gregory Cunningham,
Kevin P. O'Brien
Abstract:
We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a gen…
▽ More
We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a general setting then propose an implementation with Josephson junction transmission lines. Numerical simulation shows more than 20 dB isolation over an octave bandwidth (4-8\,GHz) in a 2000 unit cell device with less than 0.05 dB insertion loss dominated by dielectric loss.
△ Less
Submitted 13 March, 2021;
originally announced March 2021.
-
Engineering Purely Nonlinear Coupling with the Quarton
Authors:
Yufeng Ye,
Kaidong Peng,
Mahdi Naghiloo,
Gregory Cunningham,
Kevin P. O'Brien
Abstract:
Strong nonlinear coupling of superconducting qubits and/or photons is a critical building block for quantum information processing. Due to the perturbative nature of the Josephson nonlinearity, linear coupling is often used in the dispersive regime to approximate nonlinear coupling. However, this dispersive coupling is weak and the underlying linear coupling mixes the local modes which, for exampl…
▽ More
Strong nonlinear coupling of superconducting qubits and/or photons is a critical building block for quantum information processing. Due to the perturbative nature of the Josephson nonlinearity, linear coupling is often used in the dispersive regime to approximate nonlinear coupling. However, this dispersive coupling is weak and the underlying linear coupling mixes the local modes which, for example, distributes unwanted self-Kerr to photon modes. Here, we use the quarton to yield purely nonlinear coupling between two linearly decoupled transmon qubits. The quarton's zero $φ^2$ potential enables a giant gigahertz-level cross-Kerr which is an order of magnitude stronger compared to existing schemes, and the quarton's positive $φ^4$ potential can cancel the negative self-Kerr of qubits to linearize them into resonators. This giant cross-Kerr between bare modes of qubit-qubit, qubit-photon, and even photon-photon is ideal for applications such as single microwave photon detection and implementation of bosonic codes.
△ Less
Submitted 27 November, 2020; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Randomized compiling for scalable quantum computing on a noisy superconducting quantum processor
Authors:
Akel Hashim,
Ravi K. Naik,
Alexis Morvan,
Jean-Loup Ville,
Bradley Mitchell,
John Mark Kreikebaum,
Marc Davis,
Ethan Smith,
Costin Iancu,
Kevin P. O'Brien,
Ian Hincks,
Joel J. Wallman,
Joseph Emerson,
Irfan Siddiqi
Abstract:
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error which has no classical analog. Coherent errors severely limit the p…
▽ More
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error which has no classical analog. Coherent errors severely limit the performance of quantum algorithms in an unpredictable manner, and mitigating their impact is necessary for realizing reliable quantum computations. Moreover, the average error rates measured by randomized benchmarking and related protocols are not sensitive to the full impact of coherent errors, and therefore do not reliably predict the global performance of quantum algorithms, leaving us unprepared to validate the accuracy of future large-scale quantum computations. Randomized compiling is a protocol designed to overcome these performance limitations by converting coherent errors into stochastic noise, dramatically reducing unpredictable errors in quantum algorithms and enabling accurate predictions of algorithmic performance from error rates measured via cycle benchmarking. In this work, we demonstrate significant performance gains under randomized compiling for the four-qubit quantum Fourier transform algorithm and for random circuits of variable depth on a superconducting quantum processor. Additionally, we accurately predict algorithm performance using experimentally-measured error rates. Our results demonstrate that randomized compiling can be utilized to leverage and predict the capabilities of modern-day noisy quantum processors, paving the way forward for scalable quantum computing.
△ Less
Submitted 11 May, 2021; v1 submitted 1 October, 2020;
originally announced October 2020.
-
Improving wafer-scale Josephson junction resistance variation in superconducting quantum coherent circuits
Authors:
J. M. Kreikebaum,
K. P. O'Brien,
A. Morvan,
I. Siddiqi
Abstract:
Quantum bits, or qubits, are an example of coherent circuits envisioned for next-generation computers and detectors. A robust superconducting qubit with a coherent lifetime of $O$(100 $μ$s) is the transmon: a Josephson junction functioning as a non-linear inductor shunted with a capacitor to form an anharmonic oscillator. In a complex device with many such transmons, precise control over each qubi…
▽ More
Quantum bits, or qubits, are an example of coherent circuits envisioned for next-generation computers and detectors. A robust superconducting qubit with a coherent lifetime of $O$(100 $μ$s) is the transmon: a Josephson junction functioning as a non-linear inductor shunted with a capacitor to form an anharmonic oscillator. In a complex device with many such transmons, precise control over each qubit frequency is often required, and thus variations of the junction area and tunnel barrier thickness must be sufficiently minimized to achieve optimal performance while avoiding spectral overlap between neighboring circuits. Simply transplanting our recipe optimized for single, stand-alone devices to wafer-scale (producing 64, 1x1 cm dies from a 150 mm wafer) initially resulted in global drifts in room-temperature tunneling resistance of $\pm$ 30%. Inferring a critical current $I_{\rm c}$ variation from this resistance distribution, we present an optimized process developed from a systematic 38 wafer study that results in $<$ 3.5% relative standard deviation (RSD) in critical current ($\equiv σ_{I_{\rm c}}/\left\langle I_{\rm c} \right\rangle$) for 3000 Josephson junctions (both single-junctions and asymmetric SQUIDs) across an area of 49 cm$^2$. Looking within a 1x1 cm moving window across the substrate gives an estimate of the variation characteristic of a given qubit chip. Our best process, utilizing ultrasonically assisted development, uniform ashing, and dynamic oxidation has shown $σ_{I_{\rm c}}/\left\langle I_{\rm c} \right\rangle$ = 1.8% within 1x1 cm, on average, with a few 1x1 cm areas having $σ_{I_{\rm c}}/\left\langle I_{\rm c} \right\rangle$ $<$ 1.0% (equivalent to $σ_{f}/\left\langle f \right\rangle$ $<$ 0.5%). Such stability would drastically improve the yield of multi-junction chips with strict critical current requirements.
△ Less
Submitted 7 May, 2020; v1 submitted 19 September, 2019;
originally announced September 2019.
-
Polarization-Controlled Coherent Phonon Generation in Acousto-Plasmonic Metasurfaces
Authors:
N. D. Lanzillotti-Kimura,
K. P. O'Brien,
J. Rho,
H. Suchowski,
X. Yin,
X. Zhang
Abstract:
Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopi…
▽ More
Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopies and phonon lasers. Here we show how an optimized plasmonic metasurface can act as a high-frequency phonon transducer. We report pump-probe experiments in metasurfaces composed of an array of gold nanostructures, revealing that such arrays can act as efficient and tunable photon-phonon transducers, with a strong spectral dependence on the excitation rate and laser polarization. We anticipate our work to be the starting point for the engineering of phononic metasurfaces based on plasmonic nanostructures.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Effect of Layer-Stacking on the Electronic Structure of Graphene Nanoribbons
Authors:
Neerav Kharche,
Yu Zhou,
Kevin P. O'Brien,
Swastik Kar,
Saroj K. Nayak
Abstract:
The evolution of electronic structure of graphene nanoribbons (GNRs) as a function of the number of layers stacked together is investigated using \textit{ab initio} density functional theory (DFT) including interlayer van der Waals interactions. Multilayer armchair GNRs (AGNRs), similar to single-layer AGNRs, exhibit three classes of band gaps depending on their width. In zigzag GNRs (ZGNRs), the…
▽ More
The evolution of electronic structure of graphene nanoribbons (GNRs) as a function of the number of layers stacked together is investigated using \textit{ab initio} density functional theory (DFT) including interlayer van der Waals interactions. Multilayer armchair GNRs (AGNRs), similar to single-layer AGNRs, exhibit three classes of band gaps depending on their width. In zigzag GNRs (ZGNRs), the geometry relaxation resulting from interlayer interactions plays a crucial role in determining the magnetic polarization and the band structure. The antiferromagnetic (AF) interlayer coupling is more stable compared to the ferromagnetic (FM) interlayer coupling. ZGNRs with the AF in-layer and AF interlayer coupling have a finite band gap while ZGNRs with the FM in-layer and AF interlayer coupling do not have a band gap. The ground state of the bi-layer ZGNR is non-magnetic with a small but finite band gap. The magnetic ordering is less stable in multilayer ZGNRs compared to single-layer ZGNRs. The quasipartcle GW corrections are smaller for bilayer GNRs compared to single-layer GNRs because of the reduced Coulomb effects in bilayer GNRs compared to single-layer GNRs.
△ Less
Submitted 16 July, 2011;
originally announced July 2011.
