-
Connecting the Deep Quench Obstacle Problem with Surface Diffusion via their Steady States
Authors:
Eric A. Carlen,
Amy Novick-Cohen,
Lydia Peres Hari
Abstract:
In modeling phase transitions, it is useful to be able to connect diffuse interface descriptions of the dynamics with corresponding limiting sharp interface motions. In the case of the deep quench obstacle problem (DQOP) and surface diffusion (SD), while a formal connection was demonstrated many years ago, rigorous proof of the connection has yet to be established. In the present note, we show how…
▽ More
In modeling phase transitions, it is useful to be able to connect diffuse interface descriptions of the dynamics with corresponding limiting sharp interface motions. In the case of the deep quench obstacle problem (DQOP) and surface diffusion (SD), while a formal connection was demonstrated many years ago, rigorous proof of the connection has yet to be established. In the present note, we show how information regarding the steady states for both these motions can provide insight into the dynamic connection, and we outline tools that should enable further progress. For simplicity, we take both motions to be defined on a planar disk.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Coupled Surface Diffusion and Mean Curvature Motion: Axisymmetric Steady States with Two Grains and a Hole
Authors:
Katrine Golubkov,
Amy Novick-Cohen,
Yotam Vaknin
Abstract:
The evolution of two grains, which lie on a substrate and are in contact with each other, can be roughly described by a model in which the exterior surfaces of the grains evolve by surface diffusion and the grain boundary, namely the contact surface between the adjacent grains, evolves by motion by mean curvature. We consider an axi-symmetric two grain system, contained within an inert bounding se…
▽ More
The evolution of two grains, which lie on a substrate and are in contact with each other, can be roughly described by a model in which the exterior surfaces of the grains evolve by surface diffusion and the grain boundary, namely the contact surface between the adjacent grains, evolves by motion by mean curvature. We consider an axi-symmetric two grain system, contained within an inert bounding semi-infinite cylinder with a hole along the axis of symmetry. Boundary conditions are imposed reflecting the considerations of W.W. Mullins, 1958.
We focus here on the steady states of this system. At steady state, the exterior surfaces have constant and equal mean curvatures, and the grain boundary has zero mean curvature; the exterior surfaces are nodoids and the grain boundary surface is a catenoid. The physical parameters in the model can be expressed via two angles $β$ and $θ_c$, which depend on the surface free energies. Typically if a steady state solution exists for given values of $(β, θ_c)$, then there exists a continuum of such solutions. In particular, we prove that there exists a continuum of solutions with $θ_c=π$ for any $β\in (π/2, π)$.
△ Less
Submitted 7 July, 2022; v1 submitted 28 October, 2021;
originally announced October 2021.
-
Self-Similar Grooving Solutions to the Mullins' Equation
Authors:
Habiba Kalantarova,
Amy Novick-Cohen
Abstract:
In 1957, Mullins proposed surface diffusion motion as a model for thermal grooving. By adopting a small slope approximation, he reduced the model to the Mullins' linear surface diffusion equation,
\begin{equation} \nonumber
({\rm{ME}})\quad\quad y_t + B y_{xxxx}=0,
\end{equation} known also more simply as the Mullins' equation. Mullins sought self-similar solutions to (ME) for planar initial…
▽ More
In 1957, Mullins proposed surface diffusion motion as a model for thermal grooving. By adopting a small slope approximation, he reduced the model to the Mullins' linear surface diffusion equation,
\begin{equation} \nonumber
({\rm{ME}})\quad\quad y_t + B y_{xxxx}=0,
\end{equation} known also more simply as the Mullins' equation. Mullins sought self-similar solutions to (ME) for planar initial conditions, prescribing boundary conditions at the thermal groove, as well as far field decay. He found explicit series solutions which are routinely used in analyzing thermal grooving to this day.
While (ME) and the small slope approximation are physically reasonable, Mullins' choice of boundary conditions is not always appropriate. Here we present an in depth study of self-similar solutions to the Mullins' equation for general self-similar boundary conditions, explicitly identifying four linearly independent solutions defined on $\mathbb{R}\setminus\{0\}$; among these four solutions, two exhibit unbounded growth and two exhibit asymptotic decay, far from the origin. We indicate how the full set of solutions can be used in analyzing the effective boundary conditions from experimental profiles and in evaluating the governing physical parameters.
△ Less
Submitted 5 June, 2020; v1 submitted 17 June, 2019;
originally announced June 2019.
-
The thin film equation with backwards second order diffusion
Authors:
Amy Novick-Cohen,
Andrey Shishkov
Abstract:
In this paper, we focus on the thin film equation with lower order "backwards" diffusion which can describe, for example, the evolution of thin viscous films in the presence of gravity and thermo-capillary effects, or the thin film equation with a "porous media cutoff" of van der Waals forces. We treat in detail the equation $$u_t + \{u^n(u_{xxx} + νu^{m-n}u_x -A u^{M-n} u_x)\}_x=0,$$ where…
▽ More
In this paper, we focus on the thin film equation with lower order "backwards" diffusion which can describe, for example, the evolution of thin viscous films in the presence of gravity and thermo-capillary effects, or the thin film equation with a "porous media cutoff" of van der Waals forces. We treat in detail the equation $$u_t + \{u^n(u_{xxx} + νu^{m-n}u_x -A u^{M-n} u_x)\}_x=0,$$ where $ν=\pm 1,$ $n>0,$ $M>m,$ and $A \ge 0.$ Global existence of weak nonnegative solutions is proven when $ m-n> -2$ and $A>0$ or $ν=-1,$ and when $-2< m-n<2,$ $A=0,$ $ν=1.$ From the weak solutions, we get strong entropy solutions under the additional constraint that $m-n> -{3}/{2}$ if $ν=1.$ A local energy estimate is obtained when $2 \le n<3 $ under some additional restrictions. Finite speed of propagation is proven when $m>n/2,$ for the case of "strong slippage," $0<n<2,$ when $ν=1$ based on local entropy estimates, and for the case of "weak slippage," $2 \le n<3,$ when $ν=\pm 1$ based on local entropy and energy estimates.
△ Less
Submitted 4 October, 2010;
originally announced October 2010.
-
Cluster Coagulation and Growth Limited by Surface Interactions with Polymers
Authors:
Horacio G. Rotstein,
Amy Novick-Cohen,
Rina Tannenbaum
Abstract:
The physical and chemical properties of metal nanoparticles differ significantly from those of free metal atoms as well as from the properties of bulk metals, and therefore, they may be viewed as a transition regime between the two physical states. Within this nanosize regime, there is a wide fluctuation of properties, particularly chemical reactivity, as a function of the size, geometry, and el…
▽ More
The physical and chemical properties of metal nanoparticles differ significantly from those of free metal atoms as well as from the properties of bulk metals, and therefore, they may be viewed as a transition regime between the two physical states. Within this nanosize regime, there is a wide fluctuation of properties, particularly chemical reactivity, as a function of the size, geometry, and electronic state of the metal nanoparticles. In recent years, great advancements have been made in the attempts to control and manipulate the growth of metal particles to pre-specified dimensions. One of the main synthetic methods utilized in this endeavor, is the capping of the growing clusters with a variety of molecules, e.g. polymers. In this paper we attempt to model such a process and show the relationship between the concentration of the polymer present in the system and the final metal particle size obtained. The theoretical behavior which we obtained is compared with experimental results for the cobalt-polystyrene system.
△ Less
Submitted 24 March, 2000;
originally announced March 2000.
