Showing 1–50 of 71 results for author: Noack, B

A Unified Framework for Innovation-based Stochastic and Deterministic Event Triggers

Authors: Eva Julia Schmitt, Benjamin Noack

Abstract: Resources such as bandwidth and energy are limited in many wireless communications use cases, especially when large numbers of sensors and fusion centers need to exchange information frequently. One opportunity to overcome resource constraints is the use of event-based transmissions and estimation to transmit only information that contributes significantly to the reconstruction of the system's sta… ▽ More Resources such as bandwidth and energy are limited in many wireless communications use cases, especially when large numbers of sensors and fusion centers need to exchange information frequently. One opportunity to overcome resource constraints is the use of event-based transmissions and estimation to transmit only information that contributes significantly to the reconstruction of the system's state. The design of efficient triggering policies and estimators is crucial for successful event-based transmissions. While previously deterministic and stochastic event triggering policies have been treated separately, this paper unifies the two approaches and gives insights into the design of consistent trigger-matching estimators. Two different estimators are presented, and different pairs of triggers and estimators are evaluated through simulation studies. △ Less

Submitted 17 March, 2025; originally announced March 2025.

Comments: 8 pages, 5 figures, submitted to FUSION 2025

Towards Safe Path Tracking Using the Simplex Architecture

Authors: Georg Jäger, Nils-Jonathan Friedrich, Hauke Petersen, Benjamin Noack

Abstract: Robot navigation in complex environments necessitates controllers that are adaptive and safe. Traditional controllers like Regulated Pure Pursuit, Dynamic Window Approach, and Model-Predictive Path Integral, while reliable, struggle to adapt to dynamic conditions. Reinforcement Learning offers adaptability but lacks formal safety guarantees. To address this, we propose a path tracking controller l… ▽ More Robot navigation in complex environments necessitates controllers that are adaptive and safe. Traditional controllers like Regulated Pure Pursuit, Dynamic Window Approach, and Model-Predictive Path Integral, while reliable, struggle to adapt to dynamic conditions. Reinforcement Learning offers adaptability but lacks formal safety guarantees. To address this, we propose a path tracking controller leveraging the Simplex architecture. It combines a Reinforcement Learning controller for adaptiveness and performance with a high-assurance controller providing safety and stability. Our contribution is twofold. We firstly discuss general stability and safety considerations for designing controllers using the Simplex architecture. Secondly, we present a Simplex-based path tracking controller. Our simulation results, supported by preliminary in-field tests, demonstrate the controller's effectiveness in maintaining safety while achieving comparable performance to state-of-the-art methods. △ Less

Submitted 13 March, 2025; originally announced March 2025.

Flow control-oriented coherent mode prediction via Grassmann-kNN manifold learning

Authors: Hongfu Zhang, Hui Tang, Bernd R. Noack

Abstract: A data-driven method using Grassmann manifold learning is proposed to identify a low-dimensional actuation manifold for flow-controlled fluid flows. The snapshot flow field are twice compressed using Proper Orthogonal Decomposition (POD) and a diffusion model. Key steps of the actuation manifold are Grassmann manifold-based Polynomial Chaos Expansion (PCE) as the encoder and K-nearest neighbor reg… ▽ More A data-driven method using Grassmann manifold learning is proposed to identify a low-dimensional actuation manifold for flow-controlled fluid flows. The snapshot flow field are twice compressed using Proper Orthogonal Decomposition (POD) and a diffusion model. Key steps of the actuation manifold are Grassmann manifold-based Polynomial Chaos Expansion (PCE) as the encoder and K-nearest neighbor regression (kNN) as the decoder. This methodology is first tested on a simple dielectric cylinder in a homogeneous electric field to predict the out-of-sample electric field, demonstrating fast and accurate performance. Next, the present model is evaluated by predicting dynamic coherence modes of an oscillating-rotation cylinder. The cylinder's oscillating rotation amplitude and frequency are regarded as independent control parameters. The mean mode and the first dynamic mode are selected as the representative cases to test present model. For the mean mode, the Grassman manifold describes all parameterized modes with 8 latent variables. All the modes can be divided into four clusters, and they share similar features but with different wake length. For the dynamic mode, the Grassman manifold describes all modes with 12 latent variables. All the modes can be divided into three clusters. Intriguingly, each cluster is aligned with clear physical meanings. One describes the near-wake periodic vortex shedding resembling Karman vortices, one describes the far wake periodic vortex shedding, and one shows high-frequency K-H vortices shedding. Moreover, Grassmann-kNN manifold learning can accurately predict the modes. It is possible to estimate the full flow state with small reconstruction errors just by knowing the actuation parameters. This manifold learning model is demonstrated to be crucial for flow control-oriented flow estimation. △ Less

Submitted 10 October, 2024; originally announced October 2024.

Comments: arXiv admin note: text overlap with arXiv:2107.09814 by other authors

Machine-learned flow estimation with sparse data -- exemplified for the rooftop of a UAV vertiport

Authors: Chang Hou, Luigi Marra, Guy Y. Cornejo Maceda, Peng Jiang, Jingguo Chen, Yutong Liu, Gang Hu, Jialong Chen, Andrea Ianiro, Stefano Discetti, Andrea Meilán-Vila, Bernd R. Noack

Abstract: We propose a physics-informed data-driven framework for urban wind estimation. This framework validates and incorporates the Reynolds number independence for flows under various working conditions, thus allowing the extrapolation for wind conditions far beyond the training data. Another key enabler is a machine-learned non-dimensionalized manifold from snapshot data. The velocity field is modeled… ▽ More We propose a physics-informed data-driven framework for urban wind estimation. This framework validates and incorporates the Reynolds number independence for flows under various working conditions, thus allowing the extrapolation for wind conditions far beyond the training data. Another key enabler is a machine-learned non-dimensionalized manifold from snapshot data. The velocity field is modeled using a double encoder-decoder approach. The first encoder normalizes data using the oncoming wind speed, while the second encoder projects this normalized data onto the isometric feature mapping manifold. The decoders reverse this process, with $k$-nearest neighbor performing the first decoding and the second undoing the normalization. The manifold is coarse-grained by clustering to reduce the computational load for de- and encoding. The sensor-based flow estimation is based on the estimate of the oncoming wind speed and a mapping from sensor signal to the manifold latent variables. The proposed machine-learned flow estimation framework is exemplified for the flow above an Unmanned Aerial Vehicle vertiport. The wind estimation is shown to generalize well for rare wind conditions, not included in the original database. △ Less

Submitted 15 November, 2024; v1 submitted 3 October, 2024; originally announced October 2024.

Orbital cluster-based network modelling

Authors: Antonio Colanera, Nan Deng, Matteo Chiatto, Luigi de Luca, Bernd R. Noack

Abstract: We propose a novel reduced-order methodology to describe complex multi-frequency fluid dynamics from time-resolved snapshot data. Starting point is the Cluster-based Network Model (CNM) thanks to its fully automatable development and human interpretability. Our key innovation is to model the transitions from cluster to cluster much more accurately by replacing snapshot states with short-term traje… ▽ More We propose a novel reduced-order methodology to describe complex multi-frequency fluid dynamics from time-resolved snapshot data. Starting point is the Cluster-based Network Model (CNM) thanks to its fully automatable development and human interpretability. Our key innovation is to model the transitions from cluster to cluster much more accurately by replacing snapshot states with short-term trajectories ("orbits") over multiple clusters, thus avoiding nonphysical intra-cluster diffusion in the dynamic reconstruction. The proposed orbital CNM (oCNM) employs functional clustering to coarse-grain the short-term trajectories. Specifically, different filtering techniques, resulting in different temporal basis expansions, demonstrate the versatility and capability of the oCNM to adapt to diverse flow phenomena. The oCNM is illustrated on the Stuart-Landau oscillator and its post-transient solution with time-varying parameters to test its ability to capture the amplitude selection mechanism and multi-frequency behaviours. Then, the oCNM is applied to the fluidic pinball across varying flow regimes at different Reynolds numbers, including the periodic, quasi-periodic, and chaotic dynamics. This orbital-focused perspective enhances the understanding of complex temporal behaviours by incorporating high-frequency behaviour into the kinematics of short-time trajectories while modelling the dynamics of the lower frequencies. In analogy to Spectral Proper Orthogonal Decomposition, which marked the transition from spatial-only modes to spatio-temporal ones, this work advances from analysing temporal local states to examining piecewise short-term trajectories, or orbits. By merging advanced analytical methods, such as the functional representation of short-time trajectories with CNM, this study paves the way for new approaches to dissect the complex dynamics characterising turbulent systems. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Experimental jet control with Bayesian optimization and persistent data topology

Authors: Johann Moritz Reumschüssel, Yiqing Li, Philipp Maximilian zur Nedden, Tianyu Wang, Bernd R. Noack, Christian Oliver Paschereit

Abstract: This study experimentally optimizes the mixing of a turbulent jet at $Re=10000$ with the surrounding air by targeted shear layer actuation. The forcing is composed of superposed harmonic signals of different azimuthal wavenumber $m$ generated by eight loudspeakers circumferentially distributed around the nozzle lip. Amplitudes and frequencies of the individual harmonic contributions serve as optim… ▽ More This study experimentally optimizes the mixing of a turbulent jet at $Re=10000$ with the surrounding air by targeted shear layer actuation. The forcing is composed of superposed harmonic signals of different azimuthal wavenumber $m$ generated by eight loudspeakers circumferentially distributed around the nozzle lip. Amplitudes and frequencies of the individual harmonic contributions serve as optimization parameters and the time-averaged centerline velocity downstream of the potential core is used as a metric for mixing optimization. The actuation is optimized through Bayesian optimization. Three search spaces are explored - axisymmetric forcing, $m=0$, superposed axisymmetric and helical forcing, $m \in \{0,1\}$, and axisymmetric actuation combined with two counter-rotating helical modes, $m \in \{-1,0,1\}$. High-speed PIV is employed to analyze the jet response to the optimized forcing. The optimization processes are analyzed by persistent data topology. In the search space of axisymmetric excitation, the routine identifies an actuation at the natural frequency of the flow to be most efficient, with the centerline velocity being decreased by $15\%$. The optimal solutions in both the two-mode and three-mode search space converge to a similar forcing with one axial and one helical mode combined at a frequency ratio of around $2.3$. Spectral analysis of the PIV images reveals that for the identified optimal forcing frequencies, a non-linear interaction between forced and natural structures in the jet flow is triggered, leading to a reduction in centerline velocity of around $35\%$. The topology of the most complex search space from the discrete data reveals four basins of attractions, classified into three forcing patterns including axisymmetric, axisym.-helical, and axisym.-flapping. Two deep basins are related to the optimal axisym.-helical pattern, and the others are shallower. △ Less

Submitted 3 May, 2024; originally announced May 2024.

An Event-Based Approach for the Conservative Compression of Covariance Matrices

Authors: Christopher Funk, Benjamin Noack

Abstract: This work introduces a flexible and versatile method for the data-efficient yet conservative transmission of covariance matrices, where a matrix element is only transmitted if a so-called triggering condition is satisfied for the element. Here, triggering conditions can be parametrized on a per-element basis, applied simultaneously to yield combined triggering conditions or applied only to certain… ▽ More This work introduces a flexible and versatile method for the data-efficient yet conservative transmission of covariance matrices, where a matrix element is only transmitted if a so-called triggering condition is satisfied for the element. Here, triggering conditions can be parametrized on a per-element basis, applied simultaneously to yield combined triggering conditions or applied only to certain subsets of elements. This allows, e.g., to specify transmission accuracies for individual elements or to constrain the bandwidth available for the transmission of subsets of elements. Additionally, a methodology for learning triggering condition parameters from an application-specific dataset is presented. The performance of the proposed approach is quantitatively assessed in terms of data reduction and conservativeness using estimate data derived from real-world vehicle trajectories from the InD-dataset, demonstrating substantial data reduction ratios with minimal over-conservativeness. The feasibility of learning triggering condition parameters is demonstrated. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 12 pages, 9 figures, submitted to: IEEE Transactions on Automatic Control

Actuation manifold from snapshot data

Authors: Luigi Marra, Guy Y. Cornejo Maceda, Andrea Meilán-Vila, Vanesa Guerrero, Salma Rashwan, Bernd R. Noack, Stefano Discetti, Andrea Ianiro

Abstract: We propose a data-driven methodology to learn a low-dimensional manifold of controlled flows. The starting point is resolving snapshot flow data for a representative ensemble of actuations. Key enablers for the actuation manifold are isometric mapping as encoder and a combination of a neural network and a k-nearest-neighbour interpolation as decoder. This methodology is tested for the fluidic pinb… ▽ More We propose a data-driven methodology to learn a low-dimensional manifold of controlled flows. The starting point is resolving snapshot flow data for a representative ensemble of actuations. Key enablers for the actuation manifold are isometric mapping as encoder and a combination of a neural network and a k-nearest-neighbour interpolation as decoder. This methodology is tested for the fluidic pinball, a cluster of three parallel cylinders perpendicular to the oncoming uniform flow. The centres of these cylinders are the vertices of an equilateral triangle pointing upstream. The flow is manipulated by constant rotation of the cylinders, i.e. described by three actuation parameters. The Reynolds number based on a cylinder diameter is chosen to be 30. The unforced flow yields statistically symmetric periodic shedding represented by a one-dimensional limit cycle. The proposed methodology yields a five-dimensional manifold describing a wide range of dynamics with small representation error. Interestingly, the manifold coordinates automatically unveil physically meaningful parameters. Two of them describe the downstream periodic vortex shedding. The other three describe the near-field actuation, i.e. the strength of boat-tailing, the Magnus effect and forward stagnation point. The manifold is shown to be a key enabler for control-oriented flow estimation. △ Less

Submitted 16 January, 2025; v1 submitted 6 March, 2024; originally announced March 2024.

Comments: 14 pages, 7 figures

Journal ref: J. Fluid Mech. 996 (2024) A26

Deep reinforcement transfer learning for active flow control of a 3D square cylinder under state dimension mismatch

Authors: Lei Yan, Gang Hu, Wenli Chen, Bernd R. Noack

Abstract: This paper focuses on developing a deep reinforcement learning (DRL) control strategy to mitigate aerodynamic forces acting on a three dimensional (3D) square cylinder under high Reynolds number flow conditions. Four jets situated at the corners of the square cylinder are used as actuators and pressure probes on the cylinder surface are employed as feedback observers. The Soft Actor-Critic (SAC) a… ▽ More This paper focuses on developing a deep reinforcement learning (DRL) control strategy to mitigate aerodynamic forces acting on a three dimensional (3D) square cylinder under high Reynolds number flow conditions. Four jets situated at the corners of the square cylinder are used as actuators and pressure probes on the cylinder surface are employed as feedback observers. The Soft Actor-Critic (SAC) algorithm is deployed to identify an effective control scheme. Additionally, we pre-train the DRL agent using a two dimensional (2D) square cylinder flow field at a low Reynolds number (Re =1000), followed by transferring it to the 3D square cylinder at Re =22000. To address the issue of state dimension mismatch in transfer learning from 2D to 3D case, a state dimension mismatch transfer learning method is developed to enhance the SAC algorithm, named SDTL-SAC. The results demonstrate transfer learning across different state spaces achieves the same control policy as the SAC algorithm, resulting in a significant improvement in training speed with a training cost reduction of 51.1%. Furthermore, the SAC control strategy leads to a notable 52.3% reduction in drag coefficient, accompanied by substantial suppression of lift fluctuations. These outcomes underscore the potential of DRL in active flow control, laying the groundwork for efficient, robust, and practical implementation of this control technique in practical engineering. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Jet mixing enhancement with Bayesian optimization, deep learning, and persistent data topology

Authors: Yiqing Li, Bernd R. Noack, Tianyu Wang, Guy Y. Cornejo Maceda, Ethan Pickering, Tamir Shaqarin, Artur Tyliszczak

Abstract: We optimize the jet mixing using large eddy simulations (LES) at a Reynolds number of $3000$. Key methodological enablers consist of Bayesian optimization, a surrogate model enhanced by deep learning, and persistent data topology for physical interpretation. The mixing performance is characterized by an equivalent jet radius ($R_{\rm eq}$) derived from the streamwise velocity in a plane located… ▽ More We optimize the jet mixing using large eddy simulations (LES) at a Reynolds number of $3000$. Key methodological enablers consist of Bayesian optimization, a surrogate model enhanced by deep learning, and persistent data topology for physical interpretation. The mixing performance is characterized by an equivalent jet radius ($R_{\rm eq}$) derived from the streamwise velocity in a plane located $8$ diameters downstream. The optimization is performed in a 22-dimensional actuation space that comprises most known excitations. The plant benefits from a 22-dimensional actuation space that comprises most known excitations. This search space parameterizes distributed actuation imposed on the bulk flow and at the periphery of the nozzle in the streamwise and radial directions. The momentum flux measures the energy input of the actuation. The optimization quadruples the jet radius $R_{\rm eq}$ with a $7$-armed blooming jet after around $570$ evaluations. The control input requires $2\%$ momentum flux of the main flow, which is one order of magnitude lower than an ad hoc dual-mode excitation. Intriguingly, a pronounced suboptimum in the search space is associated with a double-helix jet, a new flow pattern. This jet pattern results in a mixing improvement comparable to the blooming jet. A state-of-the-art Bayesian optimization converges towards this double helix solution. The learning is accelerated and converges to another better optimum by including surrogate model trained along the optimization. Persistent data topology extracts the global and many local minima in the actuation space. These minima can be identified with flow patterns beneficial to the mixing. △ Less

Submitted 27 May, 2024; v1 submitted 4 November, 2023; originally announced November 2023.

Comments: 21 pages, 10 figures

Dynamics-augmented cluster-based network model

Authors: Chang Hou, Nan Deng, Bernd R. Noack

Abstract: In this study, we propose a novel data-driven reduced-order model for complex dynamics, including nonlinear, multi-attractor, multi-frequency, and multiscale behaviours. The starting point is a fully automatable cluster-based network model (CNM) (Li et al. J. Fluid Mech. vol.906, 2021, A21) which kinematically coarse-grains the state with clusters and dynamically predicts the transitions in a netw… ▽ More In this study, we propose a novel data-driven reduced-order model for complex dynamics, including nonlinear, multi-attractor, multi-frequency, and multiscale behaviours. The starting point is a fully automatable cluster-based network model (CNM) (Li et al. J. Fluid Mech. vol.906, 2021, A21) which kinematically coarse-grains the state with clusters and dynamically predicts the transitions in a network model. In the proposed dynamics-augmented CNM (dCNM), the prediction error is reduced with trajectory-based clustering using the same number of centroids. The dCNM is first exemplified for the Lorenz system and then implemented for the three-dimensional sphere wake featuring periodic, quasi-periodic and chaotic flow regimes. For both plants, the dCNM significantly outperforms the CNM in resolving the multi-frequency and multiscale dynamics. This increased prediction accuracy is obtained by stratification of the state space aligned with the direction of the trajectories. Thus, the dCNM has numerous potential applications to a large spectrum of shear flows, even for complex dynamics. △ Less

Submitted 1 March, 2024; v1 submitted 16 October, 2023; originally announced October 2023.

Revisit the intrinsic features of flip-flopping flow behind side-by-side circular cylinders

Authors: Wailing Chen, Yuhao Yan, Chunning Ji, Md. Mahbub Alam, Narakron Srinil, Bernd R. Noack, Nan Deng

Abstract: As one of the most intriguing wake patterns of two side-by-side circular cylinders at an intermediate gap spacing, the flip-flopping (FF) flow has attracted great attention of fundamental research interest. This FF flow is featured by the intermittently and randomly switching gap flow with correspondingly changing forces of the two cylinders. In this paper, we first present a partition map of the… ▽ More As one of the most intriguing wake patterns of two side-by-side circular cylinders at an intermediate gap spacing, the flip-flopping (FF) flow has attracted great attention of fundamental research interest. This FF flow is featured by the intermittently and randomly switching gap flow with correspondingly changing forces of the two cylinders. In this paper, we first present a partition map of the wake patterns behind two side-by-side circular cylinders and briefly introduce intrinsic features of each flow pattern. We focus on the FF flow aiming to explain: (i) the origin of the FF flow between laminar and turbulent regimes, (ii) their connections in different flow regimes, and (iii) mechanisms of the significantly varying flip-over time scale of the FF flows. In the laminar regime, we further divide the FF flow into the sub-classed I (FF1) and II (FF2), based on their different origins from the in-phase and anti-phase synchronized vortex shedding instabilities, respectively. By exploring the vortex interactions, we show that the FF flow in the turbulent regime has the same origin and similar vortex dynamics as the FF2 wake in the laminar regime, despite some minor disparities. Thus, a connection is established between the FF2 pattern in the laminar flow and the FF pattern in the turbulent flow. For the FF flow in the laminar regime (Re < 150-200), the mildly decreasing switching time, is several vortex shedding periods. However, for the FF flow in the weak turbulence regime (150-200 < Re < 1000-1700), the switching time scale increases significantly with Re owing to the increased vortex formation length. The FF in the strong turbulence regime (Re > 1000-1700) has a switching time scale of several orders of magnitude longer than the vortex shedding period, where the switching scale decreases gradually with Re due to the stronger Kelvin-Helmholtz vortices. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Aerodynamic Characterization of a Fan Array Wind Generator

Authors: Songqi Li, Yutong Liu, Zhutao Jiang, Gang Hu, Bernd R. Noack, Franz Raps

Abstract: Experimental assessment of safe and precise flight control algorithms for unmanned aerial vehicles (UAVs) under gusty wind conditions requires the capability to generate a large range of velocity profiles. In this study, we employ a small fan array wind generator which can generate flows with large spatial and temporal variability. We perform a thorough aerodynamic characterization operating the f… ▽ More Experimental assessment of safe and precise flight control algorithms for unmanned aerial vehicles (UAVs) under gusty wind conditions requires the capability to generate a large range of velocity profiles. In this study, we employ a small fan array wind generator which can generate flows with large spatial and temporal variability. We perform a thorough aerodynamic characterization operating the fans uniformly from a low to the maximum level. PIV and hot-wire measurements indicate a jet-like flow with nearly uniform core which monotonously contracts in streamwise direction and surrounding growing unsteady shear-layers. These complex dynamics results in a limited region with desired flow profile and turbulence level. The experimental results shed light on the flow generated by a full-scale fan array wind generator, and indicate the need for further improvements via properly designed add-ons and dedicated control algorithms. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 22 pages

Exploiting Structure for Optimal Multi-Agent Bayesian Decentralized Estimation

Authors: Christopher Funk, Ofer Dagan, Benjamin Noack, Nisar R. Ahmed

Abstract: A key challenge in Bayesian decentralized data fusion is the `rumor propagation' or `double counting' phenomenon, where previously sent data circulates back to its sender. It is often addressed by approximate methods like covariance intersection (CI) which takes a weighted average of the estimates to compute the bound. The problem is that this bound is not tight, i.e. the estimate is often over-co… ▽ More A key challenge in Bayesian decentralized data fusion is the `rumor propagation' or `double counting' phenomenon, where previously sent data circulates back to its sender. It is often addressed by approximate methods like covariance intersection (CI) which takes a weighted average of the estimates to compute the bound. The problem is that this bound is not tight, i.e. the estimate is often over-conservative. In this paper, we show that by exploiting the probabilistic independence structure in multi-agent decentralized fusion problems a tighter bound can be found using (i) an expansion to the CI algorithm that uses multiple (non-monolithic) weighting factors instead of one (monolithic) factor in the original CI and (ii) a general optimization scheme that is able to compute optimal bounds and fully exploit an arbitrary dependency structure. We compare our methods and show that on a simple problem, they converge to the same solution. We then test our new non-monolithic CI algorithm on a large-scale target tracking simulation and show that it achieves a tighter bound and a more accurate estimate compared to the original monolithic CI. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Comments: 4 pages, 4 figures. presented at the Inference and Decision Making for Autonomous Vehicles (IDMAV) RSS 2023 workshop

Dynamic Feature-based Deep Reinforcement Learning for Flow Control of Circular Cylinder with Sparse Surface Pressure Sensing

Authors: Qiulei Wang, Lei Yan, Gang Hu, Wenli Chen, Jean Rabault, Bernd R. Noack

Abstract: This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dyn… ▽ More This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dynamic feature-based DRL (DF-DRL) automatically learns a feedback control in the plant without a dynamic model. Results show that the drag coefficient of the DF-DRL model is 25% less than the vanilla model based on direct sensor feedback. More importantly, using only one surface pressure sensor, DF-DRL can reduce the drag coefficient to a state-of-the-art performance of about 8% at Re = 100 and significantly mitigate lift coefficient fluctuations. Hence, DF-DRL allows the deployment of sparse sensing of the flow without degrading the control performance. This method also shows good robustness in controlling flow under higher Reynolds numbers, which reduces the drag coefficient by 32.2% and 46.55% at Re = 500 and 1000, respectively, indicating the broad applicability of the method. Since surface pressure information is more straightforward to measure in realistic scenarios than flow velocity information, this study provides a valuable reference for experimentally designing the active flow control of a circular cylinder based on wall pressure signals, which is an essential step toward further developing intelligent control in realistic multi-input multi-output (MIMO) system. △ Less

Submitted 1 June, 2024; v1 submitted 4 July, 2023; originally announced July 2023.

Journal ref: J. Fluid Mech. 988 (2024) A4

Topologically assisted optimization for rotor design

Authors: Tianyu Wang, Yannian Yang, Xuanwu Chen, Pengyu Li, Angelo Iollo, Guy Y. Cornejo Maceda, Bernd R. Noack

Abstract: We develop and apply a novel shape optimization exemplified for a two-blade rotor with respect to the figure of merit ($FM$). This topologically assisted optimization (TAO) contains two steps. First a global evolutionary optimization is performed for the shape parameters and then a topological analysis reveals the local and global extrema of the objective function directly from the data. This non-… ▽ More We develop and apply a novel shape optimization exemplified for a two-blade rotor with respect to the figure of merit ($FM$). This topologically assisted optimization (TAO) contains two steps. First a global evolutionary optimization is performed for the shape parameters and then a topological analysis reveals the local and global extrema of the objective function directly from the data. This non-dimensional objective function compares the achieved thrust with the required torque. Rotor blades have a decisive contribution to the performance of quadcopters. A two-blade rotor with pre-defined chord length distribution is chosen as the baseline model.The simulation is performed in a moving reference frame with a $k-ω$ turbulence model for the hovering condition.The rotor shape is parameterized by the twist angle distribution.The optimization of this distribution employs a genetic algorithm. The local maxima are distilled from the data using a novel topological analysis inspired by discrete scalar-field topology. We identify one global maximum to be located in the interior of the data and five further local maxima related to errors from non-converged simulations.The interior location of the global optimum suggests that small improvements can be gained from further optimization.The local maxima have a small persistence, i.e., disappear under a small $\varepsilon$ perturbation of the figure of merit values. In other words, the data may be approximated by a smooth mono-modal surrogate model. Thus, the topological data analysis provides valuable insights for optimization and surrogate modeling. △ Less

Submitted 12 April, 2023; v1 submitted 17 February, 2023; originally announced February 2023.

Comments: 13 pages,21 figures

xMLC -- A Toolkit for Machine Learning Control

Authors: Guy Y. Cornejo Maceda, François Lusseyran, Bernd R. Noack

Abstract: xMLC is the second book of this `Machine Learning Tools in Fluid Mechanics' Series and focuses on Machine Learning Control (MLC). The objectives of this book are two-fold: First, provide an introduction to MLC for students, researchers, and newcomers on the field; and second, share an open-source code, xMLC, to automatically learn open- and closed-loop control laws directly in the plant with only… ▽ More xMLC is the second book of this `Machine Learning Tools in Fluid Mechanics' Series and focuses on Machine Learning Control (MLC). The objectives of this book are two-fold: First, provide an introduction to MLC for students, researchers, and newcomers on the field; and second, share an open-source code, xMLC, to automatically learn open- and closed-loop control laws directly in the plant with only a few executable commands. This presented MLC algorithm is based on genetic programming and highlights the learning principles (exploration and exploitation). The need of balance between these two principles is illustrated with an extensive parametric study where the explorative and exploitative forces are gradually integrated in the optimization process. The provided software xMLC is an implementation of MLC. It builds on OpenMLC (Duriez et al., 2017) but replaces tree-based genetic programming but the linear genetic programming framework (Brameier and Banzhaf, 2006). The latter representation is preferred for its easier implementation of multiple-input multiple-output control laws and of the genetic operators (mutation and crossover). The handling of the software is facilitated by a step by step guide that shall help new practitioners to use the code within few minutes. We also provide detailed advice in using the code for other solvers and for experiments. The code is open-source and a GitHub version is available for future updates, options and add-ons. △ Less

Submitted 28 August, 2022; originally announced August 2022.

A fast converging particle swarm optimization through targeted, position-mutated, elitism (PSO-TPME)

Authors: Tamir Shaqarin, Bernd R. Noack

Abstract: We dramatically improve convergence speed and global exploration capabilities of particle swarm optimization (PSO) through a targeted position-mutated elitism (PSO-TPME). The three key innovations address particle classification, elitism, and mutation in the cognitive and social model. PSO-TPME is benchmarked against five popular PSO variants for multi-dimensional functions, which are extensively… ▽ More We dramatically improve convergence speed and global exploration capabilities of particle swarm optimization (PSO) through a targeted position-mutated elitism (PSO-TPME). The three key innovations address particle classification, elitism, and mutation in the cognitive and social model. PSO-TPME is benchmarked against five popular PSO variants for multi-dimensional functions, which are extensively adopted in the optimization field, In particular, the convergence accuracy, convergence speed, and the capability to find global minima is investigated. The statistical error is assessed by numerous repetitions. The simulations demonstrate that proposed PSO variant outperforms the other variants in terms of convergence rate and accuracy by orders of magnitude. △ Less

Submitted 19 August, 2022; v1 submitted 2 July, 2022; originally announced July 2022.

Comments: 13 pages, 9 figures

DRLinFluids -- An open-source python platform of coupling Deep Reinforcement Learning and OpenFOAM

Authors: Qiulei Wang, Lei Yan, Gang Hu, Chao Li, Yiqing Xiao, Hao Xiong, Jean Rabault, Bernd R. Noack

Abstract: We propose an open-source python platform for applications of Deep Reinforcement Learning (DRL) in fluid mechanics. DRL has been widely used in optimizing decision-making in nonlinear and high-dimensional problems. Here, an agent maximizes a cumulative reward with learning a feedback policy by acting in an environment. In control theory terms, the cumulative reward would correspond to the cost fun… ▽ More We propose an open-source python platform for applications of Deep Reinforcement Learning (DRL) in fluid mechanics. DRL has been widely used in optimizing decision-making in nonlinear and high-dimensional problems. Here, an agent maximizes a cumulative reward with learning a feedback policy by acting in an environment. In control theory terms, the cumulative reward would correspond to the cost function, the agent to the actuator, the environment to the measured signals and the learned policy to the feedback law. Thus, DRL assumes an interactive environment or, equivalently, control plant. The setup of a numerical simulation plant with DRL is challenging and time-consuming. In this work, a novel python platform, named DRLinFluids is developed for this purpose, with DRL for flow control and optimization problems in fluid mechanics. The simulations employ OpenFOAM as popular, flexible Navier-Stokes solver in industry and academia, and Tensorforce or Tianshou as widely used versatile DRL packages. The reliability and efficiency of DRLinFluids are demonstrated for two wake stabilization benchmark problems. DRLinFluids significantly reduces the application effort of DRL in fluid mechanics and is expected to greatly accelerates academic and industrial applications. △ Less

Submitted 25 May, 2022; originally announced May 2022.

Discriminative Feature Learning through Feature Distance Loss

Authors: Tobias Schlagenhauf, Yiwen Lin, Benjamin Noack

Abstract: Ensembles of Convolutional neural networks have shown remarkable results in learning discriminative semantic features for image classification tasks. Though, the models in the ensemble often concentrate on similar regions in images. This work proposes a novel method that forces a set of base models to learn different features for a classification task. These models are combined in an ensemble to m… ▽ More Ensembles of Convolutional neural networks have shown remarkable results in learning discriminative semantic features for image classification tasks. Though, the models in the ensemble often concentrate on similar regions in images. This work proposes a novel method that forces a set of base models to learn different features for a classification task. These models are combined in an ensemble to make a collective classification. The key finding is that by forcing the models to concentrate on different features, the classification accuracy is increased. To learn different feature concepts, a so-called feature distance loss is implemented on the feature maps. The experiments on benchmark convolutional neural networks (VGG16, ResNet, AlexNet), popular datasets (Cifar10, Cifar100, miniImageNet, NEU, BSD, TEX), and different training samples (3, 5, 10, 20, 50, 100 per class) show the effectiveness of the proposed feature loss. The proposed method outperforms classical ensemble versions of the base models. The Class Activation Maps explicitly prove the ability to learn different feature concepts. The code is available at: https://github.com/2Obe/Feature-Distance-Loss.git △ Less

Submitted 19 January, 2023; v1 submitted 23 May, 2022; originally announced May 2022.

Machine-learned control-oriented flow estimation for multiactuator multi-sensor systems exemplified for the fluidic pinball

Authors: Songqi Li, Wenpeng Li, Bernd R. Noack

Abstract: We propose the first machine-learned control-oriented flow estimation for multiple-input multiple-output plants. Starting point is constant actuation with open-loop actuation commands leading to a database with simultaneously recorded actuation commands, sensor signals and flow fields. A key enabler is an estimator input vector comprising sensor signals and actuation commands. The mapping from the… ▽ More We propose the first machine-learned control-oriented flow estimation for multiple-input multiple-output plants. Starting point is constant actuation with open-loop actuation commands leading to a database with simultaneously recorded actuation commands, sensor signals and flow fields. A key enabler is an estimator input vector comprising sensor signals and actuation commands. The mapping from the sensor signals and actuation commands to the flow fields is realized in an analytically simple, data-centric and general nonlinear approach. The analytically simple estimator generalizes Linear Stochastic Estimation (LSE) for actuation commands. The data-centric approach yields flow fields from estimator inputs by interpolating from the database -- similar to Loiseau et al. (2018) for unforced flow. The interpolation is performed with k Nearest Neighbors (kNN). The general global nonlinear mapping from inputs to flow fields is obtained from a Deep Neural Network (DNN) via an iterative training approach. The estimator comparison is performed for the fluidic pinball plant, which is a multiple-input, multiple-output wake control benchmark (Deng et al. 2020) featuring rich dynamics under steady controls. We conclude that the machine learning methods clearly outperform the linear model. The performance of kNN and DNN estimators are comparable for periodic dynamics. Yet, DNN performs consistently better when the flow is chaotic. Moreover, a thorough comparison regarding to the complexity, computational cost, and prediction accuracy is presented to demonstrate the relative merits of each estimator. The proposed method can be generalized for closed-loop flow control plants. △ Less

Submitted 1 October, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

Comments: 34 pages, 27 figures, 4 tables

Trajectory-optimized cluster-based network model for the sphere wake

Authors: Chang Hou, Nan Deng, Bernd R. Noack

Abstract: We propose a novel trajectory-optimized Cluster-based Network Model (tCNM) for nonlinear model order reduction from time-resolved data following Li et al. ["Cluster-based network model, " J. Fluid Mech. 906, A21 (2021)] and improving the accuracy for a given number of centroids. The starting point is k-means++ clustering which minimizes the representation error of the snapshots by their closest ce… ▽ More We propose a novel trajectory-optimized Cluster-based Network Model (tCNM) for nonlinear model order reduction from time-resolved data following Li et al. ["Cluster-based network model, " J. Fluid Mech. 906, A21 (2021)] and improving the accuracy for a given number of centroids. The starting point is k-means++ clustering which minimizes the representation error of the snapshots by their closest centroids. The dynamics is presented by 'flights' between the centroids. The proposed trajectory-optimized clustering aims to reduce the kinematic representation error further by shifting the centroids closer to the snapshot trajectory and refining state propagation with trajectory support points. Thus, curved trajectories are better resolved. The resulting tCNM is demonstrated for the sphere wake for three flow regimes, including the periodic, quasi-periodic, and chaotic dynamics. The representation error of tCNM is 5 times smaller as compared to the approximation by the closest centroid. Thus, the error at the same level as Proper Orthogonal Decomposition (POD) of same order. Yet, tCNM has distinct advantages over POD modeling: it is human interpretable by representing dynamics by a handful of coherent structures and their transitions; it shows robust dynamics by design, i.e., stable long-time behavior; and its development is fully automatable, i.e., it does not require tuneable auxiliary closure and other models. △ Less

Submitted 30 June, 2022; v1 submitted 12 May, 2022; originally announced May 2022.

From snapshots to manifolds - A tale of shear flows

Authors: Ehsan Farzamnik, Andrea Ianiro, Stefano Discetti, Nan Deng, Kilian Oberleithner, Bernd R. Noack, Vanesa Guerrero

Abstract: We propose a novel non-linear manifold learning from snapshot data and demonstrate its superiority over Proper Orthogonal Decomposition (POD) for shedding-dominated shear flows. Key enablers are isometric feature mapping, Isomap (Tenenbaum et al., 2000), as encoder and K-nearest neighbours (KNN) algorithm as decoder. The proposed technique is applied to numerical and experimental datasets includin… ▽ More We propose a novel non-linear manifold learning from snapshot data and demonstrate its superiority over Proper Orthogonal Decomposition (POD) for shedding-dominated shear flows. Key enablers are isometric feature mapping, Isomap (Tenenbaum et al., 2000), as encoder and K-nearest neighbours (KNN) algorithm as decoder. The proposed technique is applied to numerical and experimental datasets including the fluidic pinball, a swirling jet, and the wake behind a couple of tandem cylinders. Analyzing the fluidic pinball, the manifold is able to describe the pitchfork bifurcation and the chaotic regime with only three feature coordinates. These coordinates are linked to vortex-shedding phases and the force coefficients. The manifold coordinates of the swirling jet are comparable to the POD mode amplitudes, yet allow for a more distinct manifold identification which is less sensitive to measurement noise. As similar observation is made for the wake of two tandem cylinders (Raiola et al., 2016). The tandem cylinders are aligned in streamwise distance which corresponds to the transition between the single bluff body and the reattachment regimes of vortex shedding. Isomap unveils these two shedding regimes while the Lissajous plots of first two POD mode amplitudes feature a single circle. The reconstruction error of the manifold model is small compared to the fluctuation level, indicating that the low embedding dimensions contains the coherent structure dynamics. The proposed Isomap-KNN manifold learner is expected to be of large importance in estimation, dynamic modeling and control for large range of configurations with dominant coherent structures. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Machine learning flow control with few sensor feedback and measurement noise

Authors: R. Castellanos, G. Y. Cornejo Maceda, I. de la Fuente, B. R. Noack, A. Ianiro, S. Discetti

Abstract: A comparative assessment of machine learning (ML) methods for active flow control is performed. The chosen benchmark problem is the drag reduction of a two-dimensional Kármán vortex street past a circular cylinder at a low Reynolds number ($Re=100$). The flow is manipulated with two blowing/suction actuators on the upper and lower side of a cylinder. The feedback employs several velocity sensors.… ▽ More A comparative assessment of machine learning (ML) methods for active flow control is performed. The chosen benchmark problem is the drag reduction of a two-dimensional Kármán vortex street past a circular cylinder at a low Reynolds number ($Re=100$). The flow is manipulated with two blowing/suction actuators on the upper and lower side of a cylinder. The feedback employs several velocity sensors. Two probe configurations are evaluated: 5 and 11 velocity probes located at different points around the cylinder and in the wake. The control laws are optimized with Deep Reinforcement Learning (DRL) and Linear Genetic Programming Control (LGPC). By interacting with the unsteady wake, both methods successfully stabilize the vortex alley and effectively reduce drag while using small mass flow rates for the actuation. DRL has shown higher robustness with respect to variable initial conditions and to noise contamination of the sensor data; on the other hand, LGPC is able to identify compact and interpretable control laws, which only use a subset of sensors, thus allowing reducing the system complexity with reasonably good results. Our study points at directions of future machine learning control combining desirable features of different approaches. △ Less

Submitted 21 April, 2022; v1 submitted 25 February, 2022; originally announced February 2022.

Journal ref: Physics of Fluids 34, 047118 (2022)

Stabilization of a multi-frequency open cavity flow with gradient-enriched machine learning control

Authors: Guy Y. Cornejo Maceda, Eliott Varon, François Lusseyran, Bernd R. Noack

Abstract: We stabilize an open cavity flow experiment to 1% of its original fluctuation level. For the first time, a multi-modal feedback control is automatically learned for this configuration. The key enabler is automatic in-situ optimization of control laws with machine learning augmented by a gradient descent algorithm, named gradient-enriched machine learning control (Cornejo Maceda et al. 2021, gMLC).… ▽ More We stabilize an open cavity flow experiment to 1% of its original fluctuation level. For the first time, a multi-modal feedback control is automatically learned for this configuration. The key enabler is automatic in-situ optimization of control laws with machine learning augmented by a gradient descent algorithm, named gradient-enriched machine learning control (Cornejo Maceda et al. 2021, gMLC). gMLC is shown to learn one order of magnitude faster than MLC (Duriez et al. 2017, MLC). The physical interpretation of the feedback mechanism is assisted by a novel cluster-based control law visualization for flow dynamics and corresponding actuation commands. Starting point of the control experiment are two unforced open cavity benchmark configurations: a narrow-bandwidth regime with a single dominant frequency and a mode-switching regime where two frequencies compete. The feedback control commands the DBD actuator located at the leading edge. The flow is monitored by a downstream hot-wire sensor over the trailing edge. The feedback law is optimized with respect to the monitored fluctuation level. As reference, the self-oscillations of the mixing layer are mitigated with steady actuation. Then, a feedback controller is optimized with gMLC. As expected, feedback control outperforms steady actuation by achieving both, a better amplitude reduction and a significantly smaller actuation power, about about 1% of the actuation energy required for similarly effective steady forcing. Intriguingly, optimized laws learned for one regime performs well for the other untested regime as well. The proposed control strategy can be expected to be applicable for many other shear flow experiments. △ Less

Submitted 15 June, 2022; v1 submitted 3 February, 2022; originally announced February 2022.

Comments: 48 pages, 25 figures

Cluster-based hierarchical network model of the fluidic pinball -- Cartographing transient and post-transient, multi-frequency, multi-attractor behaviour

Authors: Nan Deng, Bernd R. Noack, Marek Morzyński, Luc R. Pastur

Abstract: We propose a self-supervised cluster-based hierarchical reduced-order modelling methodology to model and analyse the complex dynamics arising from a sequence of bifurcations for a two-dimensional incompressible flow of the unforced fluidic pinball. The hierarchy is guided by a triple decomposition separating a slowly varying base flow, dominant shedding and secondary flow structures. All these flo… ▽ More We propose a self-supervised cluster-based hierarchical reduced-order modelling methodology to model and analyse the complex dynamics arising from a sequence of bifurcations for a two-dimensional incompressible flow of the unforced fluidic pinball. The hierarchy is guided by a triple decomposition separating a slowly varying base flow, dominant shedding and secondary flow structures. All these flow components are kinematically resolved by a hierarchy of clusters, starting with the base flow in the first layer, resolving the vortex shedding in the second layer and distilling the secondary flow structures in the third layer. The transition dynamics between these clusters is described by a directed network, called the cluster-based hierarchical network model (HiCNM) in the sequel. Three consecutive Reynolds number regimes for different dynamics are considered: (i) periodic shedding at $Re=80$, (ii) quasi-periodic shedding at $Re=105$, and (iii) chaotic shedding at $Re=130$, involving three unstable fixed points, three limit cycles, two quasi-periodic attractors and a chaotic attractor. The HiCNM enables identifying the transient and post-transient dynamics between multiple invariant sets in a self-supervised manner. Both the global trends and the local structures during the transition are well resolved by a moderate number of hierarchical clusters. The proposed reduced-order modelling provides a visual representation of transient and post-transient, multi-frequency, multi-attractor behaviour and may automate the identification and analysis of complex dynamics with multiple scales and multiple invariant sets. △ Less

Submitted 25 November, 2021; originally announced November 2021.

On closures for reduced order models $-$ A spectrum of first-principle to machine-learned avenues

Authors: Shady E. Ahmed, Suraj Pawar, Omer San, Adil Rasheed, Traian Iliescu, Bernd R. Noack

Abstract: For over a century, reduced order models (ROMs) have been a fundamental discipline of theoretical fluid mechanics. Early examples include Galerkin models inspired by the Orr-Sommerfeld stability equation and numerous vortex models, of which the von Kármán vortex street is one of the most prominent. Subsequent ROMs typically relied on first principles, like mathematical Galerkin models, weakly nonl… ▽ More For over a century, reduced order models (ROMs) have been a fundamental discipline of theoretical fluid mechanics. Early examples include Galerkin models inspired by the Orr-Sommerfeld stability equation and numerous vortex models, of which the von Kármán vortex street is one of the most prominent. Subsequent ROMs typically relied on first principles, like mathematical Galerkin models, weakly nonlinear stability theory, and two- and three-dimensional vortex models. Aubry et al. [N. Aubry, P. Holmes, J. Lumley, and E. Stone, Journal of Fluid Mechanics, 192, 115-173 (1988)] pioneered data-driven proper orthogonal decomposition (POD) modeling. In early POD modeling, available data was used to build an optimal basis, which was then utilized in a classical Galerkin procedure to construct the ROM. But data has made a profound impact on ROMs beyond the Galerkin expansion. In this paper, we take a modest step and illustrate the impact of data-driven modeling on one significant ROM area. Specifically, we focus on ROM closures, which are correction terms that are added to classical ROMs in order to model the effect of the discarded ROM modes in under-resolved simulations. Through simple examples, we illustrate the main modeling principles used to construct classical ROMs, motivate and introduce modern ROM closures, and show how data-driven modeling, artificial intelligence, and machine learning have changed the standard ROM methodology over the last two decades. Finally, we outline our vision on how state-of-the-art data-driven modeling can continue to reshape the field of reduced order modeling. △ Less

Submitted 23 August, 2021; v1 submitted 28 June, 2021; originally announced June 2021.

Route to Chaos in the Fluidic Pinball

Authors: Nan Deng, Luc R. Pastur, Marek Morzyński, Bernd R. Noack

Abstract: The fluidic pinball has been recently proposed as an attractive and effective flow configuration for exploring machine learning fluid flow control. In this contribution, we focus on the route to chaos in this system without actuation, as the Reynolds number is smoothly increased. It was found to be of the Newhouse-Ruelle-Takens kind, with a secondary pitchfork bifurcation that breaks the symmetry… ▽ More The fluidic pinball has been recently proposed as an attractive and effective flow configuration for exploring machine learning fluid flow control. In this contribution, we focus on the route to chaos in this system without actuation, as the Reynolds number is smoothly increased. It was found to be of the Newhouse-Ruelle-Takens kind, with a secondary pitchfork bifurcation that breaks the symmetry of the mean flow field on the route to quasi-periodicity. △ Less

Submitted 11 April, 2021; originally announced April 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2104.05104

Journal ref: Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer

Low-dimensional Flow Models from high-dimensional Flow data with Machine Learning and First Principles

Authors: Nan Deng, Luc R. Pastur, Bernd R. Noack

Abstract: Reduced-order modelling and system identification can help us figure out the elementary degrees of freedom and the underlying mechanisms from the high-dimensional and nonlinear dynamics of fluid flow. Machine learning has brought new opportunities to these two processes and is revolutionising traditional methods. We show a framework to obtain a sparse human-interpretable model from complex high-di… ▽ More Reduced-order modelling and system identification can help us figure out the elementary degrees of freedom and the underlying mechanisms from the high-dimensional and nonlinear dynamics of fluid flow. Machine learning has brought new opportunities to these two processes and is revolutionising traditional methods. We show a framework to obtain a sparse human-interpretable model from complex high-dimensional data using machine learning and first principles. △ Less

Submitted 11 April, 2021; originally announced April 2021.

Journal ref: ERCIM News 122: Solving Engineering Problems with Machine Learning. July 2020

Reduced-order modeling of the fluidic pinball

Authors: Luc R. Pastur, Nan Deng, Marek Morzyński, Bernd R. Noack

Abstract: The fluidic pinball is a geometrically simple flow configuration with three rotating cylinders on the vertex of an equilateral triangle. Yet, it remains physically rich enough to host a range of interacting frequencies and to allow testing of control laws within minutes on a laptop. The system has multiple inputs (the three cylinders can independently rotate around their axis) and multiple outputs… ▽ More The fluidic pinball is a geometrically simple flow configuration with three rotating cylinders on the vertex of an equilateral triangle. Yet, it remains physically rich enough to host a range of interacting frequencies and to allow testing of control laws within minutes on a laptop. The system has multiple inputs (the three cylinders can independently rotate around their axis) and multiple outputs (downstream velocity sensors). Investigating the natural flow dynamics, we found that the first unsteady transition undergone by the wake flow, when increasing the Reynolds number, is a Hopf bifurcation leading to the usual time-periodic vortex shedding phenomenon, typical of cylinder wake flows, in which the mean flow field preserves axial symmetry. We extract dynamically consistent modes from the flow data in order to built a reduced-order model (ROM) of this flow regime. We show that the main dynamical features of the primary Hopf bifurcation can be described by a non-trivial lowest-order model made of three degrees of freedom. △ Less

Submitted 11 April, 2021; originally announced April 2021.

Journal ref: 11th Chaotic Modeling and Simulation International Conference. CHAOS 2018. Springer Proceedings in Complexity. Springer, Cham

Evolution of room-temperature magnon gas toward coherent Bose-Einstein condensate

Authors: Timo B. Noack, Vitaliy I. Vasyuchka, Anna Pomyalov, Victor S. L'vov, Alexander A. Serga, Burkard Hillebrands

Abstract: The appearance of spontaneous coherence is a fundamental feature of a Bose-Einstein condensate and an essential requirement for possible applications of the condensates for data processing and quantum computing. In the case of a magnon condensate in a magnetic crystal, such computing can be performed even at room temperature. So far, the process of coherence formation in a magnon condensate was in… ▽ More The appearance of spontaneous coherence is a fundamental feature of a Bose-Einstein condensate and an essential requirement for possible applications of the condensates for data processing and quantum computing. In the case of a magnon condensate in a magnetic crystal, such computing can be performed even at room temperature. So far, the process of coherence formation in a magnon condensate was inaccessible. We study the evolution of magnon radiation spectra by direct detection of microwave radiation emitted by magnons in a parametrically driven yttrium iron garnet crystal. By using specially shaped bulk samples, we show that the parametrically overpopulated magnon gas evolves to a state, whose coherence is only limited by the natural magnon relaxation into the crystal lattice. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comments: 6 pages, 2 figures

Journal ref: Physical Review B 104, 100410 (2021)

Stabilization of the fluidic pinball with gradient-enriched machine learning control

Authors: Guy Y. Cornejo Maceda, Yiqing Li, François Lusseyran, Marek Morzyński, Bernd R. Noack

Abstract: We stabilize the flow past a cluster of three rotating cylinders, the fluidic pinball, with automated gradient-enriched machine learning algorithms. The control laws command the rotation speed of each cylinder in an open- and closed-loop manner. These laws are optimized with respect to the average distance from the target steady solution in three successively richer search spaces. First, stabiliza… ▽ More We stabilize the flow past a cluster of three rotating cylinders, the fluidic pinball, with automated gradient-enriched machine learning algorithms. The control laws command the rotation speed of each cylinder in an open- and closed-loop manner. These laws are optimized with respect to the average distance from the target steady solution in three successively richer search spaces. First, stabilization is pursued with steady symmetric forcing. Second, we allow for asymmetric steady forcing. And third, we determine an optimal feedback controller employing nine velocity probes downstream. As expected, the control performance increases with every generalization of the search space. Surprisingly, both open- and closed-loop optimal controllers include an asymmetric forcing, which surpasses symmetric forcing. Intriguingly, the best performance is achieved by a combination of phasor control and asymmetric steady forcing. We hypothesize that asymmetric forcing is typical for pitchfork bifurcated dynamics of nominally symmetric configurations. Key enablers are automated machine learning algorithms augmented with gradient search: explorative gradient method for the open-loop parameter optimization and a gradient-enriched machine learning control (gMLC) for the feedback optimization. gMLC learns the control law significantly faster than previously employed genetic programming control. The gMLC source code is freely available online. △ Less

Submitted 12 February, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Comments: 45 pages, 23 figures

Galerkin force model for transient and post-transient dynamics of the fluidic pinbal

Authors: Nan Deng, Bernd R. Noack, Marek Morzyński, Luc R. Pastur

Abstract: We propose an aerodynamic force model associated with a Galerkin model for the unforced fluidic pinball, the two-dimensional flow around three equal cylinders with one radius distance to each other. The starting point is a Galerkin model of a bluff-body flow. The force on this body is derived as a constant-linear-quadratic function of the mode amplitudes from first principles following the pioneer… ▽ More We propose an aerodynamic force model associated with a Galerkin model for the unforced fluidic pinball, the two-dimensional flow around three equal cylinders with one radius distance to each other. The starting point is a Galerkin model of a bluff-body flow. The force on this body is derived as a constant-linear-quadratic function of the mode amplitudes from first principles following the pioneering work of Noca (1997, 1999) and Liang & Dong (2014). The force model is simplified for the mean-field model of the unforced fluidic pinball (Deng et al. 2020) using symmetry properties and sparse calibration. The model is successfully applied to transient and post-transient dynamics in different Reynolds number regimes: the periodic vortex shedding after the Hopf-bifurcation and the asymmetric vortex shedding after the pitchfork bifurcation comprising six different Navier-Stokes solutions. We foresee many applications of the Galerkin force model for other bluff bodies and flow control. △ Less

Submitted 22 March, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Cluster-based network modeling -- automated robust modeling of complex dynamical systems

Authors: Daniel Fernex, Bernd R. Noack, Richard Semaan

Abstract: We propose a universal method for data-driven modeling of complex nonlinear dynamics from time-resolved snapshot data without prior knowledge. Complex nonlinear dynamics govern many fields of science and engineering. Data-driven dynamic modeling often assumes a low-dimensional subspace or manifold for the state. We liberate ourselves from this assumption by proposing cluster-based network modeling… ▽ More We propose a universal method for data-driven modeling of complex nonlinear dynamics from time-resolved snapshot data without prior knowledge. Complex nonlinear dynamics govern many fields of science and engineering. Data-driven dynamic modeling often assumes a low-dimensional subspace or manifold for the state. We liberate ourselves from this assumption by proposing cluster-based network modeling (CNM) bridging machine learning, network science, and statistical physics. CNM only assumes smoothness of the dynamics in the state space, robustly describes short- and long-term behavior and is fully automatable as it does not rely on application-specific knowledge. CNM is demonstrated for the Lorenz attractor, ECG heartbeat signals, Kolmogorov flow, and a high-dimensional actuated turbulent boundary layer. Even the notoriously difficult modeling benchmark of rare events in the Kolmogorov flow is solved. This automatable universal data-driven representation of complex nonlinear dynamics complements and expands network connectivity science and promises new fast-track avenues to understand, estimate, predict and control complex systems in all scientific fields. △ Less

Submitted 30 October, 2020; originally announced October 2020.

Towards human-interpretable, automated learning of feedback control for the mixing layer

Authors: Hao Li, Guy Y. Cornejo Maceda, Yiqing Li, Jianguo Tan, Marek Morzyński, Bernd R. Noack

Abstract: We propose an automated analysis of the flow control behaviour from an ensemble of control laws and associated time-resolved flow snapshots. The input may be the rich data base of machine learning control (MLC) optimizing a feedback law for a cost function in the plant. The proposed methodology provides (1) insights into control landscape which maps control laws to performance including extrema an… ▽ More We propose an automated analysis of the flow control behaviour from an ensemble of control laws and associated time-resolved flow snapshots. The input may be the rich data base of machine learning control (MLC) optimizing a feedback law for a cost function in the plant. The proposed methodology provides (1) insights into control landscape which maps control laws to performance including extrema and ridge-lines, (2) a catalogue of representative flow states and their contribution to cost function for investigated control laws and (3) a visualization of the dynamics. Key enablers are classification and feature extraction methods of machine learning. The analysis is successfully applied to the stabilization of a mixing layer with sensor-based feedback driving an upstream actuator. The fluctuation energy is reduced by 26\%. The control replaces unforced Kelvin-Helmholtz vortices with subsequent vortex pairing by higher-frequency Kelvin-Helmholtz structures of lower energy. These efforts target a human interpretable, fully automated analysis of MLC identifying qualitatively different actuation regimes, distilling corresponding coherent structures, and developing a digital twin of the plant. △ Less

Submitted 29 August, 2020; originally announced August 2020.

Comments: Submitter to Journal of Fluid Mechanics

Artificial intelligence control of a turbulent jet

Authors: Yu Zhou, Dewei Fan, Bingfu Zhang, Ruiying Li, Bernd R. Noack

Abstract: An artificial intelligence (AI) control system is developed to maximize the mixing rate of a turbulent jet. This system comprises six independently operated unsteady minijet actuators, two hot-wire sensors placed in the jet, and genetic programming for the unsupervised learning of a near-optimal control law. The ansatz of this law includes multi-frequency open-loop forcing, sensor-feedback and non… ▽ More An artificial intelligence (AI) control system is developed to maximize the mixing rate of a turbulent jet. This system comprises six independently operated unsteady minijet actuators, two hot-wire sensors placed in the jet, and genetic programming for the unsupervised learning of a near-optimal control law. The ansatz of this law includes multi-frequency open-loop forcing, sensor-feedback and nonlinear combinations thereof. Mixing performance is quantified by the decay rate of the centreline mean velocity of jet. Intriguingly, the learning process of AI control discovers the classical forcings, i.e. axisymmetric, helical and flapping achievable from conventional control techniques, one by one in the order of increased performance, and finally converges to a hitherto unexplored forcing. Careful examination of the control landscape unveils typical control laws, generated in the learning process, and their evolutions. The best AI forcing produces a complex turbulent flow structure that is characterized by periodically generated mushroom structures, helical motion and oscillating jet column, all enhancing the mixing rate and vastly outperforming others. Being never reported before, this flow structure is examined in various aspects, including the velocity spectra, mean and fluctuating velocity fields and their downstream evolution, and flow visualization images in three orthogonal planes, all compared with other classical flow structures. Along with the knowledge of the minijet-produced flow and its effect on the initial condition of the main jet, these aspects cast valuable insight into the physics behind the highly effective mixing of this newly found flow structure. The results point to the great potential of AI in conquering the vast opportunity space of control laws for many actuators and sensors and in optimizing turbulence. △ Less

Submitted 10 May, 2020; originally announced May 2020.

Comments: 44 pages, 24 figures

Journal ref: J. Fluid Mech. 897 (2020) A27

Cluster-based network model

Authors: Hao Li, Daniel Fernex, Richard Semaan, Jianguo Tan, Marek Morzyński, Bernd R. Noack

Abstract: We propose an automatable data-driven methodology for robust nonlinear reduced-order modelling from time-resolved snapshot data. In the kinematical coarse-graining, the snapshots are clustered into few centroids representable for the whole ensemble. The dynamics is conceptualized as a directed network, where the centroids represent nodes and the directed edges denote possible finite-time transitio… ▽ More We propose an automatable data-driven methodology for robust nonlinear reduced-order modelling from time-resolved snapshot data. In the kinematical coarse-graining, the snapshots are clustered into few centroids representable for the whole ensemble. The dynamics is conceptualized as a directed network, where the centroids represent nodes and the directed edges denote possible finite-time transitions. The transition probabilities and times are inferred from the snapshot data. The resulting cluster-based network model constitutes a deterministic-stochastic grey-box model resolving the coherent-structure evolution. This model is motivated by limit-cycle dynamics, illustrated for the chaotic Lorenz attractor and successfully demonstrated for the laminar two-dimensional mixing layer featuring Kelvin-Helmholtz vortices and vortex pairing, and for an actuated turbulent boundary layer with complex dynamics. Cluster-based network modelling opens a promising new avenue with unique advantages over other model-order reductions based on clustering or proper orthogonal decomposition. △ Less

Submitted 14 September, 2020; v1 submitted 9 January, 2020; originally announced January 2020.

Actuation response model from sparse data for wall turbulence drag reduction

Authors: Daniel Fernex, Richard Semaan, Marian Albers, Pascal S. Meysonnat, Wolfgang Schröder, Bernd R. Noack

Abstract: We compute, model, and predict drag reduction of an actuated turbulent boundary layer at a momentum thickness based Reynolds number of Reθ = 1000. The actuation is performed using spanwise traveling transversal surface waves parameterized by wavelength, amplitude, and period. The drag reduction for the set of actuation parameters is modeled using 71 large-eddy simulations (LES). This drag model al… ▽ More We compute, model, and predict drag reduction of an actuated turbulent boundary layer at a momentum thickness based Reynolds number of Reθ = 1000. The actuation is performed using spanwise traveling transversal surface waves parameterized by wavelength, amplitude, and period. The drag reduction for the set of actuation parameters is modeled using 71 large-eddy simulations (LES). This drag model allows to extrapolate outside the actuation domain for larger wavelengths and amplitudes. The modeling novelty is based on combining support vector regression for interpolation, a parameterized ridgeline leading out of the data domain, scaling from Tomiyama and Fukagata (2013), and a discovered self-similar structure of the actuation effect. The model yields high prediction accuracy outside the training data range. △ Less

Submitted 18 September, 2019; originally announced September 2019.

Drag Reduction and Energy Saving by Spanwise Traveling Transversal Surface Waves for Flat Plate Flow

Authors: Marian Albers, Pascal S. Meysonnat, Daniel Fernex, Richard Semaan, Bernd R. Noack, Wolfgang Schröder

Abstract: Wall-resolved large-eddy simulations are performed to study the impact of spanwise traveling transversal surface waves in zero-pressure gradient turbulent boundary layer flow. Eighty variations of wavelength, period, and amplitude of the space- and time-dependent sinusoidal wall motion are considered for a boundary layer at a momentum thickness based Reynolds number of $Re_θ= 1000$. The results sh… ▽ More Wall-resolved large-eddy simulations are performed to study the impact of spanwise traveling transversal surface waves in zero-pressure gradient turbulent boundary layer flow. Eighty variations of wavelength, period, and amplitude of the space- and time-dependent sinusoidal wall motion are considered for a boundary layer at a momentum thickness based Reynolds number of $Re_θ= 1000$. The results show a strong decrease of friction drag of up to $26\,\%$ and considerable net power saving of up to $10\,\%$. However, the highest net power saving does not occur at the maximum drag reduction. The drag reduction is modeled as a function of the actuation parameters by support vector regression using the LES data. A substantial attenuation of the near-wall turbulence intensity and especially a weakening of the near-wall velocity streaks are observed. Similarities between the current actuation technique and the method of a spanwise oscillating wall without any normal surface deflection are reported. In particular, the generation of a directional spanwise oscillating Stokes layer is found to be related to skin-friction reduction. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Improved Pose Graph Optimization for Planar Motions Using Riemannian Geometry on the Manifold of Dual Quaternions

Authors: Kailai Li, Johannes Cox, Benjamin Noack, Uwe D. Hanebeck

Abstract: We present a novel Riemannian approach for planar pose graph optimization problems. By formulating the cost function based on the Riemannian metric on the manifold of dual quaternions representing planar motions, the nonlinear structure of the SE(2) group is inherently considered. To solve the on-manifold least squares problem, a Riemannian Gauss-Newton method using the exponential retraction is a… ▽ More We present a novel Riemannian approach for planar pose graph optimization problems. By formulating the cost function based on the Riemannian metric on the manifold of dual quaternions representing planar motions, the nonlinear structure of the SE(2) group is inherently considered. To solve the on-manifold least squares problem, a Riemannian Gauss-Newton method using the exponential retraction is applied. The proposed Riemannian pose graph optimizer (RPG-Opt) is further evaluated based on public planar pose graph data sets. Compared with state-of-the-art frameworks, the proposed method gives equivalent accuracy and better convergence robustness under large uncertainties of odometry measurements. △ Less

Submitted 20 November, 2019; v1 submitted 31 July, 2019; originally announced July 2019.

Comments: 7 pages. Submitted to 21st IFAC World Congress (IFAC 2020)

Locally linear embedding for transient cylinder wakes

Authors: Arthur Ehlert, Christian N. Nayeri, Marek Morzynski, Bernd R. Noack

Abstract: Reduced-order representations of an ensemble of cylinder wake transients are investigated. Locally linear embedding identifies a two-dimensional manifold with a maximum error of 1% from new snapshot data. This representation outperforms a 50-dimensional POD expansion from the same data and is not obtainable with cluster-based coarse graining of similar order. This manifold resolves the steady solu… ▽ More Reduced-order representations of an ensemble of cylinder wake transients are investigated. Locally linear embedding identifies a two-dimensional manifold with a maximum error of 1% from new snapshot data. This representation outperforms a 50-dimensional POD expansion from the same data and is not obtainable with cluster-based coarse graining of similar order. This manifold resolves the steady solution, the stability eigenmodes, the first post-transient POD modes, the intermediate vortex shedding structure as well as higher harmonics. The snapshot data are generated by a direct numerical simulation of the two-dimensional wake behind a circular cylinder at a Reynolds number of 100. The initial conditions of the 16 transients start near the steady solution and converge to the period vortex shedding. Many oscillatory flows can be expected to be characterized on two- or low-dimensional manifolds identifiable with locally linear embedding. These manifolds have unexplored potential for prediction, estimation and control. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 22 pages, 19 figures, 44 references

Explorative gradient method for active drag reduction of the fluidic pinball and slanted Ahmed body

Authors: Yiqing Li, Wenshi Cui, Qing Jia, Qiliang Li, Zhigang Yang, Marek Morzyński, Bernd R. Noack

Abstract: We address a challenge of active flow control: the optimization of many actuation parameters guaranteeing fast convergence and avoiding suboptimal local minima. This challenge is addressed by a new optimizer, called explorative gradient method (EGM). EGM alternatively performs one exploitive downhill simplex step and an explorative Latin hypercube sampling iteration. Thus, the convergence rate of… ▽ More We address a challenge of active flow control: the optimization of many actuation parameters guaranteeing fast convergence and avoiding suboptimal local minima. This challenge is addressed by a new optimizer, called explorative gradient method (EGM). EGM alternatively performs one exploitive downhill simplex step and an explorative Latin hypercube sampling iteration. Thus, the convergence rate of a gradient based method is guaranteed while, at the same time, better minima are explored. For an analytical multi-modal test function, EGM is shown to significantly outperform the downhill simplex method, the random restart variant, Latin hypercube sampling, Monte Carlo iterations and the genetic algorithm. EGM is applied to minimize the net drag power of the two-dimensional fluidic pinball benchmark with three cylinder rotations as actuation parameters. The net drag power is reduced by $40\%$ employing direct numerical simulations at a Reynolds number of $100$ based on the cylinder diameter. This optimal actuation leads to $98\%$ drag reduction employing Coanda forcing for boat tailing and partial stabilization of vortex shedding. The price is an actuation energy corresponding to $58\%$ of the unforced parasitic drag power. EGM is also used to minimize drag of the $35^\circ$ slanted Ahmed body employing distributed steady blowing with 10 inputs. $17\%$ drag reduction are achieved using Reynolds-Averaged Navier-Stokes simulations (RANS) at the Reynolds number $Re_H=1.9 \times 10^5$ based on the height of the Ahmed body. The optimal actuation emulates boat tailing by inward-directed blowing with velocities which are comparable to the oncoming velocity. We expect that EGM will be employed as efficient optimizer in many future active flow control plants. △ Less

Submitted 30 October, 2020; v1 submitted 28 May, 2019; originally announced May 2019.

Machine Learning for Fluid Mechanics

Authors: Steven Brunton, Bernd Noack, Petros Koumoutsakos

Abstract: The field of fluid mechanics is rapidly advancing, driven by unprecedented volumes of data from field measurements, experiments and large-scale simulations at multiple spatiotemporal scales. Machine learning offers a wealth of techniques to extract information from data that could be translated into knowledge about the underlying fluid mechanics. Moreover, machine learning algorithms can augment d… ▽ More The field of fluid mechanics is rapidly advancing, driven by unprecedented volumes of data from field measurements, experiments and large-scale simulations at multiple spatiotemporal scales. Machine learning offers a wealth of techniques to extract information from data that could be translated into knowledge about the underlying fluid mechanics. Moreover, machine learning algorithms can augment domain knowledge and automate tasks related to flow control and optimization. This article presents an overview of past history, current developments, and emerging opportunities of machine learning for fluid mechanics. It outlines fundamental machine learning methodologies and discusses their uses for understanding, modeling, optimizing, and controlling fluid flows. The strengths and limitations of these methods are addressed from the perspective of scientific inquiry that considers data as an inherent part of modeling, experimentation, and simulation. Machine learning provides a powerful information processing framework that can enrich, and possibly even transform, current lines of fluid mechanics research and industrial applications. △ Less

Submitted 4 January, 2020; v1 submitted 27 May, 2019; originally announced May 2019.

Comments: To appear in the Annual Reviews of Fluid Mechanics, 2020

Low-order model for successive bifurcations of the fluidic pinball

Authors: Nan Deng, Bernd R. Noack, Marek Morzynski, Luc R. Pastur

Abstract: We propose the first least-order Galerkin model of an incompressible flow undergoing two successive supercritical bifurcations of Hopf and pitchfork type. A key enabler is a mean-field consideration exploiting the symmetry of the mean flow and the asymmetry of the fluctuation. These symmetries generalize mean-field theory, e.g. no assumption of slow growth-rate is needed. The resulting 5-dimension… ▽ More We propose the first least-order Galerkin model of an incompressible flow undergoing two successive supercritical bifurcations of Hopf and pitchfork type. A key enabler is a mean-field consideration exploiting the symmetry of the mean flow and the asymmetry of the fluctuation. These symmetries generalize mean-field theory, e.g. no assumption of slow growth-rate is needed. The resulting 5-dimensional Galerkin model successfully describes the phenomenogram of the fluidic pinball, a two-dimensional wake flow around a cluster of three equidistantly spaced cylinders. The corresponding transition scenario is shown to undergo two successive supercritical bifurcations, namely a Hopf and a pitchfork bifurcations on the way to chaos. The generalized mean-field Galerkin methodology may be employed to describe other transition scenarios. △ Less

Submitted 11 April, 2021; v1 submitted 20 December, 2018; originally announced December 2018.

Journal ref: J. Fluid Mech. 884 (2020) A37

Rethinking the Reynolds Transport Theorem, Liouville Equation, and Perron-Frobenius and Koopman Operators

Authors: Robert K. Niven, Laurent Cordier, Eurika Kaiser, Michael Schlegel, Bernd R. Noack

Abstract: The Reynolds transport theorem provides a generalized conservation law for the transport of a conserved quantity by fluid flow through a continuous connected control volume. It is close connected to the Liouville equation for the conservation of a local probability density function, which in turn leads to the Perron-Frobenius and Koopman evolution operators. All of these tools can be interpreted a… ▽ More The Reynolds transport theorem provides a generalized conservation law for the transport of a conserved quantity by fluid flow through a continuous connected control volume. It is close connected to the Liouville equation for the conservation of a local probability density function, which in turn leads to the Perron-Frobenius and Koopman evolution operators. All of these tools can be interpreted as continuous temporal maps between fluid elements or domains, connected by the integral curves (pathlines) described by a velocity vector field. We here review these theorems and operators, to present a unified framework for their extension to maps in different spaces. These include (a) spatial maps between different positions in a time-independent flow, connected by a velocity gradient tensor field, and (b) parametric maps between different positions in a manifold, connected by a generalized tensor field. The general formulation invokes a multivariate extension of exterior calculus, and the concept of a probability differential form. The analyses reveal the existence of multivariate continuous (Lie) symmetries induced by a vector or tensor field associated with a conserved quantity, which are manifested as integral conservation laws in different spaces. The findings are used to derive generalized conservation laws, Liouville equations and operators for a number of fluid mechanical and dynamical systems, including spatial (time-independent) and spatiotemporal fluid flows, flow systems with pairwise or $n$-wise spatial correlations, phase space systems, Lagrangian flows, spectral flows, and systems with coupled chemical reaction and flow processes. △ Less

Submitted 23 November, 2020; v1 submitted 14 October, 2018; originally announced October 2018.

Comments: 8 figure files

MSC Class: 35B53; 35Q49; 45K05; 47D06; 58A15; 60B15; 70H33; 76A02

Cluster-based feedback control of turbulent post-stall separated flows

Authors: Aditya G. Nair, Chi-An Yeh, Eurika Kaiser, Bernd R. Noack, Steven L. Brunton, Kunihiko Taira

Abstract: We propose a novel model-free self-learning cluster-based control strategy for general nonlinear feedback flow control technique, benchmarked for high-fidelity simulations of post-stall separated flows over an airfoil. The present approach partitions the flow trajectories (force measurements) into clusters, which correspond to characteristic coarse-grained phases in a low-dimensional feature space… ▽ More We propose a novel model-free self-learning cluster-based control strategy for general nonlinear feedback flow control technique, benchmarked for high-fidelity simulations of post-stall separated flows over an airfoil. The present approach partitions the flow trajectories (force measurements) into clusters, which correspond to characteristic coarse-grained phases in a low-dimensional feature space. A feedback control law is then sought for each cluster state through iterative evaluation and downhill simplex search to minimize power consumption in flight. Unsupervised clustering of the flow trajectories for in-situ learning and optimization of coarse-grained control laws are implemented in an automated manner as key enablers. Re-routing the flow trajectories, the optimized control laws shift the cluster populations to the aerodynamically favorable states. Utilizing limited number of sensor measurements for both clustering and optimization, these feedback laws were determined in only $O(10)$ iterations. The objective of the present work is not necessarily to suppress flow separation but to minimize the desired cost function to achieve enhanced aerodynamic performance. The present control approach is applied to the control of two and three-dimensional separated flows over a NACA 0012 airfoil with large-eddy simulations at an angle of attack of $9^\circ$, Reynolds number $Re = 23,000$ and free-stream Mach number $M_\infty = 0.3$. The optimized control laws effectively minimize the flight power consumption enabling the flows to reach a low-drag state. The present work aims to address the challenges associated with adaptive feedback control design for turbulent separated flows at moderate Reynolds number. △ Less

Submitted 19 September, 2018; originally announced September 2018.

Comments: 32 pages, 18 figures

MSC Class: 76G25

Journal ref: J. Fluid Mech. 875 (2019) 345-375

Unstable Periodically Forced Navier-Stokes Solutions---Towards Nonlinear First-Principle Reduced-Order Modeling of Actuator Performance

Authors: Marek Morzynski, Wojciech Szeliga, Bernd R. Noack

Abstract: We advance the computation of physical modal expansions for unsteady incompressible flows. Point of departure is a linearization of the Navier-Stokes equations around its fixed point in a frequency domain formulation. While the most amplified stability eigenmode is readily identified by a power method, the technical challenge is the computation of more damped higher-order eigenmodes. This challeng… ▽ More We advance the computation of physical modal expansions for unsteady incompressible flows. Point of departure is a linearization of the Navier-Stokes equations around its fixed point in a frequency domain formulation. While the most amplified stability eigenmode is readily identified by a power method, the technical challenge is the computation of more damped higher-order eigenmodes. This challenge is addressed by a novel method to compute unstable periodically forced solutions of the linearized Navier-Stokes solution. This method utilizes two key enablers. First, the linear dynamics is transformed by a complex shift of the eigenvalues amplifying the flow response at the given frequency of interest. Second, the growth rate is obtained from an iteration procedure. The method is demonstrated for several wake flows around a circular cylinder, a fluidic pinball, i.e. the wake behind a cluster of cylinders, a wall-mounted cylinder, a sphere and a delta wing. The example of flow control with periodic wake actuation and forced physical modes paves the way for applications of physical modal expansions. These results encourage Galerkin models of three-dimensional flows utilizing Navier-Stokes based modes. △ Less

Submitted 22 April, 2018; originally announced April 2018.

Comments: 29 pages, 24 figures, 36 references

Jet mixing optimization using machine learning control

Authors: Zhi Wu, Fan Dewei, Yu Zhou, Ruiying Li, Bernd R. Noack

Abstract: We experimentally optimize mixing of a turbulent round jet using machine learning control (MLC) following Li et al (2017). The jet is manipulated with one unsteady minijet blowing in wall-normal direction close to the nozzle exit. The flow is monitored with two hotwire sensors. The first sensor is positioned on the centerline 5 jet diameters downstream of the nozzle exit, i.e. the end of the poten… ▽ More We experimentally optimize mixing of a turbulent round jet using machine learning control (MLC) following Li et al (2017). The jet is manipulated with one unsteady minijet blowing in wall-normal direction close to the nozzle exit. The flow is monitored with two hotwire sensors. The first sensor is positioned on the centerline 5 jet diameters downstream of the nozzle exit, i.e. the end of the potential core, while the second is located 3 jet diameters downstream and displaced towards the shear-layer. The mixing performance is monitored with mean velocity at the first sensor. A reduction of this velocity correlates with increased entrainment near the potential core. Machine Learning Control (MLC) is employed to optimize sensor feedback, a general open-loop broadband frequency actuation and combinations of both. MLC has identified the optimal periodic forcing with a small duty cycle as the best control policy employing only 400 actuation measurements, each lasting for 5 seconds. This learning rate is comparable if not faster than typical optimization of periodic forcing with two free parameters (frequency and duty cycle). In addition, MLC results indicate that neither new frequencies nor sensor feedback improves mixing further-contrary to many of other turbulence control experiments. The optimality of pure periodic actuation may be attributed to the simple jet flapping mechanism in the minijet plane. The performance of sensor feedback is shown to face a challenge for small duty cycles. The jet mixing results demonstrate the untapped potential of MLC in quickly learning optimal general control policies, even deciding between open- and closed-loop control. △ Less

Submitted 4 February, 2018; originally announced February 2018.

Comments: 15 pages, 14 figures

Journal ref: Exp Fluids (2018) 59: 131

Metric for attractor overlap

Authors: Rishabh Ishar, Eurika Kaiser, Marek Morzynski, Daniel Fernex, Richard Semaan, Marian Albers, Pascal S. Meysonnat, Wolfgang Schröder, Bernd R. Noack

Abstract: We present the first general metric for attractor overlap (MAO) facilitating an unsupervised comparison of flow data sets. The starting point is two or more attractors, i.e., ensembles of states representing different operating conditions. The proposed metric generalizes the standard Hilbert-space distance between two snapshots to snapshot ensembles of two attractors. A reduced-order analysis for… ▽ More We present the first general metric for attractor overlap (MAO) facilitating an unsupervised comparison of flow data sets. The starting point is two or more attractors, i.e., ensembles of states representing different operating conditions. The proposed metric generalizes the standard Hilbert-space distance between two snapshots to snapshot ensembles of two attractors. A reduced-order analysis for big data and many attractors is enabled by coarse-graining the snapshots into representative clusters with corresponding centroids and population probabilities. For a large number of attractors, MAO is augmented by proximity maps for the snapshots, the centroids, and the attractors, giving scientifically interpretable visual access to the closeness of the states. The coherent structures belonging to the overlap and disjoint states between these attractors are distilled by few representative centroids. We employ MAO for two quite different actuated flow configurations: (1) a two-dimensional wake of the fluidic pinball with vortices in a narrow frequency range and (2) three-dimensional wall turbulence with broadband frequency spectrum manipulated by spanwise traveling transversal surface waves. MAO compares and classifies these actuated flows in agreement with physical intuition. For instance, the first feature coordinate of the attractor proximity map correlates with drag for the fluidic pinball and for the turbulent boundary layer. MAO has a large spectrum of potential applications ranging from a quantitative comparison between numerical simulations and experimental particle-image velocimetry data to the analysis of simulations representing a myriad of different operating conditions. △ Less

Submitted 17 August, 2018; v1 submitted 3 December, 2017; originally announced December 2017.

Comments: 33 pages, 20 figures

Journal ref: J. Fluid Mech. 874 (2019) 720-755

Sparse reduced-order modeling : Sensor-based dynamics to full-state estimation

Authors: Jean-Christophe Loiseau, Bernd R. Noack, Steven L. Brunton

Abstract: We propose a general dynamic reduced-order modeling framework for typical experimental data: time-resolved sensor data and optional non-time-resolved PIV snapshots. This framework contains four steps. First, the sensor signals are lifted to a dynamic feature space. Second, we identify a sparse human-interpretable nonlinear dynamical system for the feature state based on the sparse identification o… ▽ More We propose a general dynamic reduced-order modeling framework for typical experimental data: time-resolved sensor data and optional non-time-resolved PIV snapshots. This framework contains four steps. First, the sensor signals are lifted to a dynamic feature space. Second, we identify a sparse human-interpretable nonlinear dynamical system for the feature state based on the sparse identification of nonlinear dynamics (SINDy). Third, if PIV snapshots are available, a local linear mapping from the feature state to velocity fields is shown to be orders of magnitudes more accurate than optimal modal expansions of the same order. Fourth, a generalized feature-based modal decomposition identifies coherent structures that are most dynamically correlated with the linear and nonlinear interaction terms in the sparse model, adding interpretability. Steps 1 and 2 define a black-box model. Optional steps 3 and 4 lift the black-box dynamics to a 'gray-box' model of the coherent structures, if non-time-resolved full-state data is available. This gray-box modeling strategy is successfully applied to the transient and post-transient laminar cylinder wake, and compares favorably with a POD model. We foresee numerous applications of this highly flexible modeling strategy, including estimation, prediction and control. Moreover, the feature space may be based on intrinsic coordinates, which are unaffected by a key challenge of modal expansion: the slow change of low-dimensional coherent structures with changing geometry and varying parameters. △ Less

Submitted 12 June, 2017; originally announced June 2017.