-
An Accurate Smartphone Battery Parameter Calibration Using Unscented Kalman Filter
Authors:
Chalukya Bhat,
Aniruddh Herle,
Janamejaya Channegowda,
Kali Naraharisetti
Abstract:
Internet of Things (IoT) applications have opened up numerous possibilities to improve our lives. Most of the remote devices, part of the IoT network, such as smartphones, data loggers and wireless sensors are battery powered. It is vital to collect battery measurement data (Voltage or State-of-Charge (SOC)) from these remote devices. Presence of noise in these measurements restricts effective uti…
▽ More
Internet of Things (IoT) applications have opened up numerous possibilities to improve our lives. Most of the remote devices, part of the IoT network, such as smartphones, data loggers and wireless sensors are battery powered. It is vital to collect battery measurement data (Voltage or State-of-Charge (SOC)) from these remote devices. Presence of noise in these measurements restricts effective utilization of this dataset. This paper presents the application of Unscented Kalman Filter (UKF) to mitigate measurement noise in smartphone dataset. The simplicity of this technique makes it a constructive approach for noise removal. The datasets obtained after noise removal could be used to improve data-driven time series forecasting models which aid to accurately estimate critical battery parameters such as SOC. UKF was tested on noisy charge and discharge dataset of a smartphone. An overall Mean Squared Error (MSE) of 0.0017 and 0.0010 was obtained for Voltage charge and discharge measurements. MSE for SOC charge and discharge data measurements were 0.0018 and 0.0010 respectively.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Generalized Circuit Averaging Technique for Two Switch DC-DC Converters
Authors:
Sumukh Surya,
Janamejaya Channegowda,
Kali Naraharisetti
Abstract:
Cuk and SEPIC are some of the important DC-DC converters used for charging batteries. In this paper, a generalized circuit averaging technique is employed for Cuk and SEPIC converters. The derived equations are used to obtain the frequency response of open loop transfer function. The ratio of perturbed output voltage to duty cycle ($G_{vd}$) is simulated using LTSpice software package. The derived…
▽ More
Cuk and SEPIC are some of the important DC-DC converters used for charging batteries. In this paper, a generalized circuit averaging technique is employed for Cuk and SEPIC converters. The derived equations are used to obtain the frequency response of open loop transfer function. The ratio of perturbed output voltage to duty cycle ($G_{vd}$) is simulated using LTSpice software package. The derived averaged models of the converters aids in faster and simpler simulation. The behavior of the converters in CCM and DCM was also simulated. The derived expressions can be generalized to power converters with two switches.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Single Stage PFC Flyback AC-DC Converter Design
Authors:
Kali Naraharisetti,
Janamejaya Channegowda
Abstract:
This paper discusses a 100 W single stage Power Factor Correction (PFC) flyback converter operating in boundary mode constant ON time methodology using a synchronous MOS-FET rectifier on the secondary side to achieve higher efficiency. Unlike conventional designs which use two stage approach such as PFC plus a LLC resonant stage or a two stage PFC plus flyback, the proposed design integrates the P…
▽ More
This paper discusses a 100 W single stage Power Factor Correction (PFC) flyback converter operating in boundary mode constant ON time methodology using a synchronous MOS-FET rectifier on the secondary side to achieve higher efficiency. Unlike conventional designs which use two stage approach such as PFC plus a LLC resonant stage or a two stage PFC plus flyback, the proposed design integrates the PFC and constant voltage regulation in a single stage without compromising the efficiency of the converter. The proposed design is advantageous as it has a lower component count. A design of 100 W flyback operating from universal input AC line voltage is demonstrated in this paper. The experimental results show that the power factor (PF) is greater than 0.92 and total harmonic distortion (iTHD) is less than 20% for a load varying from 25 % to 100 %. The experimental results show the advantages of a single stage design.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Analysis of NARXNN for State of Charge Estimation for Li-ion Batteries on various Drive Cycles
Authors:
Aniruddh Herle,
Janamejaya Channegowda,
Kali Naraharisetti
Abstract:
Electric Vehicles (EVs) are rapidly increasing in popularity as they are environment friendly. Lithium Ion batteries are at the heart of EV technology and contribute to most of the weight and cost of an EV. State of Charge (SOC) is a very important metric which helps to predict the range of an EV. There is a need to accurately estimate available battery capacity in a battery pack such that the ava…
▽ More
Electric Vehicles (EVs) are rapidly increasing in popularity as they are environment friendly. Lithium Ion batteries are at the heart of EV technology and contribute to most of the weight and cost of an EV. State of Charge (SOC) is a very important metric which helps to predict the range of an EV. There is a need to accurately estimate available battery capacity in a battery pack such that the available range in a vehicle can be determined. There are various techniques available to estimate SOC. In this paper, a data driven approach is selected and a Nonlinear Autoregressive Network with Exogenous Inputs Neural Network (NARXNN) is explored to accurately estimate SOC. NARXNN has been shown to be superior to conventional Machine Learning techniques available in the literature. The NARXNN model is developed and tested on various EV Drive Cycles like LA92, US06, UDDS and HWFET to test its performance on real world scenarios. The model is shown to outperform conventional statistical machine learning methods and achieve a Mean Squared Error (MSE) in the 1e-5 range.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.
-
Thermal Analysis of PEM Fuel Cell and Lithium Ion Battery Pack in Confined Space
Authors:
Ashita Victor,
Abhay Shankar Jha,
Janamejaya Channegowda,
Sumukh Surya,
Kali vara prasad Naraharisetti
Abstract:
Hybrid energy storage systems (HESS) have carved a niche in the industry. HESS improve the system efficiency, reduce the overall cost and increase the lifespan of the system. The proton exchange membrane (PEM) fuel cell is hybridized with Li-ion batteries (LIB) for vehicular applications, robotic applications etc. In applications which have geometrical space constraints, the temperature of the ene…
▽ More
Hybrid energy storage systems (HESS) have carved a niche in the industry. HESS improve the system efficiency, reduce the overall cost and increase the lifespan of the system. The proton exchange membrane (PEM) fuel cell is hybridized with Li-ion batteries (LIB) for vehicular applications, robotic applications etc. In applications which have geometrical space constraints, the temperature of the energy storage elements is influenced by convective heat transfer. In this paper the thermal analysis of the geometry of PEM-LIB hybrid system is carried out using COMSOL Multiphysics Software package for different discharge rates (C rates) of the LIB and different voltages of the PEM cell. The additional rise in temperature of the LIB pack when placed in close proximity with PEM cell was in the range of 0.03-0.6$^0$C at 4C. The cell temperature of the LIB pack increased with increase in C rate and decrease in PEM cell voltage.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
