Showing 1–50 of 150 results for author: Nakajima, M

Programmable Photonic Unitary Processor Enables Parametrized Differentiable Long-Haul Spatial Division Multiplexed Transmission

Authors: Mitsumasa Nakajima, Kohki Shibahara, Kohei Ikeda, Akira Kawai, Masaya Notomi, Yutaka Miyamoto, Toshikazu Hashimoto

Abstract: The explosive growth of global data traffic demands scalable and energy-efficient optical communication systems. Spatial division multiplexing (SDM) using multicore or multimode fibers is a promising solution to overcome the capacity limit of single-mode fibers. However, long-haul SDM transmission faces significant challenges due to modal dispersion, which imposes heavy computational loads on digi… ▽ More The explosive growth of global data traffic demands scalable and energy-efficient optical communication systems. Spatial division multiplexing (SDM) using multicore or multimode fibers is a promising solution to overcome the capacity limit of single-mode fibers. However, long-haul SDM transmission faces significant challenges due to modal dispersion, which imposes heavy computational loads on digital signal processing (DSP) for signal equalization. Here, we propose parameterized SDM transmission, where programmable photonic unitary processors are installed at intermediate nodes. Instead of relying on conventional digital equalization only on the receiver side, our approach enables direct optimization of the SDM transmission channel itself by the programmable unitary processor, which reduces digital post-processing loads. We introduce a gradient-based optimization algorithm using a differentiable SDM transmission model to determine the optimal unitary transformation. As a key enabler, we first implemented telecom-grade programmable photonic unitary processor, achieving a low-loss (2.1 dB fiber-to-fiber), wideband (full C-band), polarization-independent, and high-fidelity (R2>96% across the C-band) operation. We experimentally demonstrate 1300-km transmission using a three-mode fiber, achieving strong agreement between simulation and experiment. The optimized photonic processor significantly reduces modal dispersion and post-processing complexity. Our results establish a scalable framework for integrating photonic computation into the optical layer, enabling more efficient, high-capacity optical networks. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Thermonuclear superburst of MAXI J1752$-$457 observed with NinjaSat and MAXI

Authors: Amira Aoyama, Teruaki Enoto, Takuya Takahashi, Sota Watanabe, Tomoshi Takeda, Wataru Iwakiri, Kaede Yamasaki, Satoko Iwata, Naoyuki Ota, Arata Jujo, Toru Tamagawa, Tatehiro Mihara, Chin-Ping Hu, Akira Dohi, Nobuya Nishimura, Motoko Serino, Motoki Nakajima, Takao Kitaguchi, Yo Kato, Nobuyuki Kawai

Abstract: An uncatalogued bright X-ray transient was detected with MAXI on November 9, 2024, named MAXI J1752$-$457. The NinjaSat X-ray observatory promptly observed the source from November 10 to 18 while the small angular separation from the Sun hampered follow-up campaigns by other X-ray observatories. The MAXI and NinjaSat light curves in the 2-10 keV band showed first and second decaying components at… ▽ More An uncatalogued bright X-ray transient was detected with MAXI on November 9, 2024, named MAXI J1752$-$457. The NinjaSat X-ray observatory promptly observed the source from November 10 to 18 while the small angular separation from the Sun hampered follow-up campaigns by other X-ray observatories. The MAXI and NinjaSat light curves in the 2-10 keV band showed first and second decaying components at the early and late phases, approximated by exponential functions with e-folding constants of 1.2 $\pm$ 0.2 and 14.9 $\pm$ 0.9 hours (1$σ$ errors), respectively. A single blackbody model reproduces the X-ray spectrum with a softening trend of its temperature decreasing from 1.8 $\pm$ 0.1 keV to 0.59 $\pm$ 0.06 keV. Assuming the unknown source distance at 8 kpc, at which the initial X-ray luminosity roughly corresponds to the Eddington limit, the shrinking blackbody radius was estimated at 5-11 km. This X-ray brightening is interpreted as a superburst in a Galactic low-mass X-ray binary, which is powered by thermonuclear burning triggered presumably by carbon ignition close to the outer crust of the neutron star. The transition between two decaying components occurred at 5.5-7.7 hours, corresponding to the thermal time scale of the burning layer. The ignition column density is estimated to be (2.8-5.1)$\times 10^{12}$ g cm$^{-2}$. △ Less

Submitted 28 May, 2025; v1 submitted 6 April, 2025; originally announced April 2025.

Comments: 11 pages, 4 figures, accepted for publication in ApJL

Report number: RIKEN-iTHEMS-Report-25

Optical Observations of the High Mass X-ray Binary MAXI J0709$-$159/LY CMa

Authors: Megumi Shidatsu, Nobuyuki Kawai, Hiroyuki Maehara, Emi Goto, Sota Urabe, Wataru Iwakiri, Yohko Tsuboi, Noboru Nemoto, Sakura Nawa, Mutsumi Sugizaki, Motoki Nakajima, Masafumi Niwano, Ryohei Hosokawa, Marie Sakamoto, Yoshiki Matsuoka

Abstract: We report on the optical spectroscopic monitoring of the X-ray transient MAXI J0709$-$159 (identified as the Be star LY CMa) performed for about 1.5 months after the X-ray detection with MAXI. The observed spectrum showed a double-peaked H$α$ line with a peak-to-peak separation of $\sim 230$ km s$^{-1}$, suggestive of the Be disk origin. We also detected a broad wing of the H$α$ line with a line-o… ▽ More We report on the optical spectroscopic monitoring of the X-ray transient MAXI J0709$-$159 (identified as the Be star LY CMa) performed for about 1.5 months after the X-ray detection with MAXI. The observed spectrum showed a double-peaked H$α$ line with a peak-to-peak separation of $\sim 230$ km s$^{-1}$, suggestive of the Be disk origin. We also detected a broad wing of the H$α$ line with a line-of-sight velocity of $\gtrsim 900$ km s$^{-1}$, which could be explained by the accretion disk of the compact object or a stellar wind from the Be star. Initially the H$α$ line showed an asymmetric profile with an enhanced blue peak, and then the blue peak decreased in $\sim$ 3 weeks to a similar strength to the red peak. We suggest that the evolution of the blue peak is associated with the X-ray activity and generated by the turbulence of the Be disk due to the passage of the compact object. We also investigated flux variation using the archival TESS data and found quasi-periodic variations with frequencies of $\sim 1$ and $\sim 2$ day$^{-1}$, which were likely caused by the pulsation of the B star. The overall variability properties on timescales of $\sim$ day were similar to those in Be X-ray binaries, rather than supergiant X-ray binaries. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 12 pages, 9 figures, Accepted for publication in PASJ

Quantifying the amplitudes of ultrafast magnetization fluctuations in Sm$_{0.7}$Er$_{0.3}$FeO$_{3}$ using femtosecond noise correlation spectroscopy

Authors: M. A. Weiss, F. S. Herbst, G. Skobjin, S. Eggert, M. Nakajima, D. Reustlen, A. Leitenstorfer, S. T. B. Goennenwein, T. Kurihara

Abstract: Spin fluctuations are an important issue for the design and operation of future spintronic devices. Femtosecond noise correlation spectroscopy (FemNoC) was recently applied to detect ultrafast magnetization fluctuations. FemNoC gives direct access to the spontaneous fluctuations of the magnetization in magnetically ordered materials. In FemNoC experiments, the magnetic fluctuations are imprinted o… ▽ More Spin fluctuations are an important issue for the design and operation of future spintronic devices. Femtosecond noise correlation spectroscopy (FemNoC) was recently applied to detect ultrafast magnetization fluctuations. FemNoC gives direct access to the spontaneous fluctuations of the magnetization in magnetically ordered materials. In FemNoC experiments, the magnetic fluctuations are imprinted on the polarization state of two independent femtosecond probe pulses upon transmission through a magnetic sample. Using a subharmonic demodulation scheme, the cross-correlation of the signals from both pulse trains is calculated. Here, we quantitatively link the FemNoC output signal to an optical polarization rotation, and then in turn to the magnitude of the inherent spin fluctuations. To this end, three different calibration protocols are presented and compared in accuracy. Ultimately, we quantitatively determine both the variance of optical polarization noise in rad$^2$, and that of the ultrafast magnetization fluctuations in (A/m)$^2$. △ Less

Submitted 29 January, 2025; originally announced January 2025.

Identification of the interstellar 1-cyano propargyl radical (HCCCHCN) in TMC-1

Authors: C. Cabezas, M. Agúndez, N. Marcelino, C. H. Chang, R. Fuentetaja, B. Tercero, M. Nakajima, Y. Endo, P. de Vicente, J. Cernicharo

Abstract: We report the first detection in interstellar medium of the 1-cyano propargyl radical, HC$_3$HCN. This species is an isomer of the 3-cyano propargyl radical (CH$_2$C$_3$N), which was recently discovered in TMC-1. The 1-cyano propargyl radical was observed in the cold dark cloud TMC-1 using data from the ongoing QUIJOTE line survey, which is being carried out with the Yebes 40m telescope. A total o… ▽ More We report the first detection in interstellar medium of the 1-cyano propargyl radical, HC$_3$HCN. This species is an isomer of the 3-cyano propargyl radical (CH$_2$C$_3$N), which was recently discovered in TMC-1. The 1-cyano propargyl radical was observed in the cold dark cloud TMC-1 using data from the ongoing QUIJOTE line survey, which is being carried out with the Yebes 40m telescope. A total of seven rotational transitions with multiple hyperfine components were detected in the 31.0-50.4 GHz range. We derived a column density of (2.2$\pm$0.2)$\times$10$^{11}$ cm$^{-2}$ and a rotational temperature of 7$\pm$1\,K. The abundance ratio between HC$_3$HCN and CH$_2$C$_3$N is 1.4. The almost equal abundance of these isomers indicates that the two species may be produced in the same reaction with a similar efficiency, probably in the reaction C + CH$_2$CHCN and perhaps also in the reaction C$_2$ + CH$_3$CN and the dissociative recombination with electrons of CH$_2$C$_3$NH$^+$ △ Less

Submitted 3 January, 2025; originally announced January 2025.

Comments: Accepted as a Letter to the Editor in Astronomy & Astrophysics on December 29th 2024

Out-of-plane intensity modulation of spin susceptibility in Ba$_{0.75}$K$_{0.25}$Fe$_{2}$As$_{2}$ as seen via time-of-flight neutron spectroscopy

Authors: Naoki Murai, Katsuhiro Suzuki, Masamichi Nakajima, Maiko Kofu, Seiko Ohira-Kawamura, Yasuhiro Inamura, Ryoichi Kajimoto

Abstract: We present a time-of-flight inelastic neutron scattering study of the iron-based superconductor Ba$_{0.75}$K$_{0.25}$Fe$_{2}$As$_{2}$, focusing on its spin dynamics. Our measurements reveal a periodic intensity modulation of magnetic signals along the out-of-plane direction, which deviates from the behavior typically expected for two-dimensional magnetic materials. Using an effective model derived… ▽ More We present a time-of-flight inelastic neutron scattering study of the iron-based superconductor Ba$_{0.75}$K$_{0.25}$Fe$_{2}$As$_{2}$, focusing on its spin dynamics. Our measurements reveal a periodic intensity modulation of magnetic signals along the out-of-plane direction, which deviates from the behavior typically expected for two-dimensional magnetic materials. Using an effective model derived from density functional theory calculations, we demonstrate that the observed out-of-plane modulated spin susceptibility originates from the intrinsic three-dimensionality of the electronic band structure. Our study reveals the limitations of the widely assumed two-dimensional nature of spin susceptibility in iron-based superconductors, highlighting the importance of incorporating three-dimensional aspects of the electronic band structure for accurate modeling of spin dynamics. △ Less

Submitted 22 December, 2024; originally announced December 2024.

Comments: 9 pages, 4 figures

Tungsten isotope evolution during Earth's formation and new constraints on the viability of accretion simulations

Authors: D. C. Rubie, K. I. Dale, G. Nathan, M. Nakajima, E. S. Jennings, G. J. Golabek, S. A. Jacobson, A. Morbidelli

Abstract: The Hf-W isotopic system is the reference chronometer for determining the chronology of Earth's accretion and differentiation. However, its results depend strongly on uncertain parameters, including the extent of metal-silicate equilibration and the siderophility of tungsten. Here we show that a multistage core-formation model based on N-body accretion simulations, element mass balance and metal-s… ▽ More The Hf-W isotopic system is the reference chronometer for determining the chronology of Earth's accretion and differentiation. However, its results depend strongly on uncertain parameters, including the extent of metal-silicate equilibration and the siderophility of tungsten. Here we show that a multistage core-formation model based on N-body accretion simulations, element mass balance and metal-silicate partitioning, largely eliminates these uncertainties. We modified the original model of Rubie et al. (2015) by including (1) smoothed particle hydrodynamics estimates of the depth of melting caused by giant impacts and (2) the isotopic evolution of 182W. We applied two metal-silicate fractionation mechanisms: one when the metal delivered by the cores of large impactors equilibrates with only a small fraction of the impact-induced magma pond and the other when metal delivered by small impactors emulsifies in global magma oceans before undergoing progressive segregation. The latter is crucial for fitting the W abundance and 182W anomaly of Earth's mantle. In addition, we show, for the first time, that the duration of magma ocean solidification has a major effect on Earth's tungsten isotope anomaly. We re-evaluate the six Grand Tack N-body simulations of Rubie et al. (2015). Only one reproduces epsilon182W=1.9+/-0.1 of Earth's mantle, otherwise accretion is either too fast or too slow. Depending on the characteristics of the giant impacts, results predict that the Moon formed either 143-183 Myr or 53-62 Myr after the start of the solar system. Thus, independent evaluations of the Moon's age provide an additional constraint on the validity of accretion simulations. △ Less

Submitted 26 November, 2024; originally announced November 2024.

Comments: In press in EPSL

X-Raying Neutral Density Disturbances in the Mesosphere and Lower Thermosphere induced by the 2022 Hunga-Tonga Volcano Eruption-Explosion

Authors: Satoru Katsuda, Hiroyuki Shinagawa, Hitoshi Fujiwara, Hidekatsu Jin, Yasunobu Miyoshi, Yoshizumi Miyoshi, Yuko Motizuki, Motoki Nakajima, Kazuhiro Nakazawa, Kumiko K. Nobukawa, Yuichi Otsuka, Atsushi Shinbori, Takuya Sori, Chihiro Tao, Makoto S. Tashiro, Yuuki Wada, Takaya Yamawaki

Abstract: We present X-ray observations of the upper atmospheric density disturbance caused by the explosive eruption of the Hunga Tonga-Hunga Ha'apai (HTHH) volcano on 15 January 2022. From 14 January to 16 January, the Chinese X-ray astronomy satellite, Insight-HXMT, was observing the supernova remnant Cassiopeia A. The X-ray data obtained during Earth's atmospheric occultations allowed us to measure neut… ▽ More We present X-ray observations of the upper atmospheric density disturbance caused by the explosive eruption of the Hunga Tonga-Hunga Ha'apai (HTHH) volcano on 15 January 2022. From 14 January to 16 January, the Chinese X-ray astronomy satellite, Insight-HXMT, was observing the supernova remnant Cassiopeia A. The X-ray data obtained during Earth's atmospheric occultations allowed us to measure neutral densities in the altitude range of ~90-150 km. The density profiles above 110 km altitude obtained before the major eruption are in reasonable agreement with expectations by both GAIA and NRLMSIS 2.0 models. In contrast, after the HTHH eruption, a severe density depletion was found up to ~1,000 km away from the epicenter, and a relatively weak depletion extending up to ~7,000 km for over 8 hr after the eruption. In addition, density profiles showed wavy structures with a typical length scale of either ~20 km (vertical) or ~1,000 km (horizontal). This may be caused by Lamb waves or gravity waves triggered by the volcanic eruption. △ Less

Submitted 12 October, 2024; originally announced October 2024.

Comments: 14 pages, 4 figures, accepted for publication in Geophysical Research Letters

GX 301-2 pre-periastron and apastron flares with MAXI

Authors: Á. Torregrosa, J. J. Rodes-Roca, J. M. Torrejón, G. Sanjurjo-Ferrín, T. Mihara, M. Nakajima, M. Sugizaki

Abstract: The bright high-mass X-ray binary GX 301-2 exhibits two periodic flare episodes along its orbit which are produced when the neutron star is close to the apastron and periastron passages. Time-resolved spectra were extracted and several models applied to describe all of them. The best description was obtained with a blackbody continuum modified by the Fe K-shell absorption edge, absorbed by a large… ▽ More The bright high-mass X-ray binary GX 301-2 exhibits two periodic flare episodes along its orbit which are produced when the neutron star is close to the apastron and periastron passages. Time-resolved spectra were extracted and several models applied to describe all of them. The best description was obtained with a blackbody continuum modified by the Fe K-shell absorption edge, absorbed by a large column density on the order of $10^{23}$ cm$^{-2}$ and, if present, a Fe K$α$ fluorescent emission line. Three of the nine apastron flares were as bright as the pre-periastron flare and two of them coincided with spin-up episodes of the neutron star. This fact points to the presence of a transient disc around the neutron star as it passes through the apastron that increases the accretion process. The size of emitting region on the neutron star surface showed some variability but quite consistent with a hot spot. △ Less

Submitted 11 October, 2024; v1 submitted 4 October, 2024; originally announced October 2024.

Comments: 36 pages, 77 figures, accepted for publication in RMxAA. It will appear in Vol. 61, N°1, April 2025

Training Spiking Neural Networks via Augmented Direct Feedback Alignment

Authors: Yongbo Zhang, Katsuma Inoue, Mitsumasa Nakajima, Toshikazu Hashimoto, Yasuo Kuniyoshi, Kohei Nakajima

Abstract: Spiking neural networks (SNNs), the models inspired by the mechanisms of real neurons in the brain, transmit and represent information by employing discrete action potentials or spikes. The sparse, asynchronous properties of information processing make SNNs highly energy efficient, leading to SNNs being promising solutions for implementing neural networks in neuromorphic devices. However, the nond… ▽ More Spiking neural networks (SNNs), the models inspired by the mechanisms of real neurons in the brain, transmit and represent information by employing discrete action potentials or spikes. The sparse, asynchronous properties of information processing make SNNs highly energy efficient, leading to SNNs being promising solutions for implementing neural networks in neuromorphic devices. However, the nondifferentiable nature of SNN neurons makes it a challenge to train them. The current training methods of SNNs that are based on error backpropagation (BP) and precisely designing surrogate gradient are difficult to implement and biologically implausible, hindering the implementation of SNNs on neuromorphic devices. Thus, it is important to train SNNs with a method that is both physically implementatable and biologically plausible. In this paper, we propose using augmented direct feedback alignment (aDFA), a gradient-free approach based on random projection, to train SNNs. This method requires only partial information of the forward process during training, so it is easy to implement and biologically plausible. We systematically demonstrate the feasibility of the proposed aDFA-SNNs scheme, propose its effective working range, and analyze its well-performing settings by employing genetic algorithm. We also analyze the impact of crucial features of SNNs on the scheme, thus demonstrating its superiority and stability over BP and conventional direct feedback alignment. Our scheme can achieve competitive performance without accurate prior knowledge about the utilized system, thus providing a valuable reference for physically training SNNs. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Comments: 20 pages, 8 figures, 2 tables

Thermal and magnetic evolution of an Earth-like planet with a basal magma ocean

Authors: Victor Lherm, Miki Nakajima, Eric G. Blackman

Abstract: Earth's geodynamo has operated for over 3.5 billion years. The magnetic field is currently powered by thermocompositional convection in the outer core, which involves the release of light elements and latent heat as the inner core solidifies. However, since the inner core nucleated no more than 1.5 billion years ago, the early dynamo could not rely on these buoyancy sources. Given recent estimates… ▽ More Earth's geodynamo has operated for over 3.5 billion years. The magnetic field is currently powered by thermocompositional convection in the outer core, which involves the release of light elements and latent heat as the inner core solidifies. However, since the inner core nucleated no more than 1.5 billion years ago, the early dynamo could not rely on these buoyancy sources. Given recent estimates of the thermal conductivity of the outer core, an alternative mechanism may be required to sustain the geodynamo prior to nucleation of the inner core. One possibility is a silicate dynamo operating in a long-lived basal magma ocean. Here, we investigate the structural, thermal, buoyancy, and magnetic evolution of an Earth-like terrestrial planet. Using modern equations of state and melting curves, we include a time-dependent parameterization of the compositional evolution of an iron-rich basal magma ocean. We combine an internal structure integration of the planet with energy budgets in a coupled core, basal magma ocean, and mantle system. We determine the thermocompositional convective stability of the core and the basal magma ocean, and assess their respective dynamo activity using entropy budgets and magnetic Reynolds numbers. Our conservative nominal model predicts a transient basal magma ocean dynamo followed by a core dynamo after 1 billion years. The model is sensitive to several parameters, including the initial temperature of the core-mantle boundary, the parameterization of mantle convection, the composition of the basal magma ocean, the radiogenic content of the planet, as well as convective velocity and magnetic scaling laws. We use the nominal model to constrain the range of basal magma ocean electrical conductivity and core thermal conductivity that sustain a dynamo. △ Less

Submitted 9 September, 2024; originally announced September 2024.

Composition, Structure and Origin of the Moon

Authors: Paolo A. Sossi, Miki Nakajima, Amir Khan

Abstract: Here we critically examine the geophysical and geochemical properties of the Moon in order to identify the extent to which dynamical scenarios satisfy these observations. New joint inversions of existing lunar geophysical data (mean mass, moment of inertia, and tidal response) assuming a laterally- and vertically homogeneous lunar mantle show that, in all cases, a core with a radius of 300$\pm$20… ▽ More Here we critically examine the geophysical and geochemical properties of the Moon in order to identify the extent to which dynamical scenarios satisfy these observations. New joint inversions of existing lunar geophysical data (mean mass, moment of inertia, and tidal response) assuming a laterally- and vertically homogeneous lunar mantle show that, in all cases, a core with a radius of 300$\pm$20 km ($\sim$0.8 to 1.5 % the mass of the Moon) is required. However, an Earth-like Mg# (0.89) in the lunar mantle results in core densities (7800$\pm$100 kg/m$^3$) consistent with that of Fe-Ni alloy, whereas FeO-rich compositions (Mg# = 0.80--0.84) require lower densities (6100$\pm$800 kg/m$^3$). Geochemically, we use new data on mare basalts to reassess the bulk composition of the Moon for 70 elements, and show that the lunar core likely formed near 5 GPa, 2100 K and $\sim$1 log unit below the iron-wüstite buffer. Moreover, the Moon is depleted relative to the Earth's mantle in elements with volatilities higher than that of Li, with this volatile loss likely having occurred at low temperatures (1400$\pm$100 K), consistent with mass-dependent stable isotope fractionation of moderately volatile elements (e.g., Zn, K, Rb). The identical nucleosynthetic (O, Cr, Ti) and radiogenic (W) isotope compositions of the lunar and terrestrial mantles, strongly suggest the two bodies were made from the same material, rather than from an Earth-like impactor. Rb-Sr in FANs and Lu-Hf and Pb-Pb zircon ages point Moon formation close to $\sim$4500 Ma. Taken together, there is no unambiguous geochemical or isotopic evidence for the role of an impactor in the formation of the Moon, implying perfect equilibration between the proto-Earth and Moon-forming material or alternative scenarios for its genesis. △ Less

Submitted 29 August, 2024; originally announced August 2024.

Comments: 62 pages, 23 figures, 5 tables. Treatise of Geochemistry, vol. 3, in press

Correlation between $T_{\mathrm{c}}$ and the Pseudogap Observed in the Optical Spectra of High $T_{\mathrm{c}}$ Superconducting Cuprates

Authors: Setsuko Tajima, Yuhta Itoh, Katsuya Mizutamari, Shigeki Miyasaka, Masamichi Nakajima, Nae Sasaki, Shunpei Yamaguchi, Kei-ichi Harada, Takao Watanabe

Abstract: We studied the temperature dependences of the optical spectra for optimally and underdoped Bi$_2$Sr$_2$Ca$_2$Cu$_3$O$_{10+z}$ single crystals. Similarly to the other cuprates' cases, a gap-like conductivity suppression was observed with reducing the temperature from above $T_{\mathrm{c}}$, creating a peak in the conductivity spectrum. The conductivity peak energy was insensitive to the doping leve… ▽ More We studied the temperature dependences of the optical spectra for optimally and underdoped Bi$_2$Sr$_2$Ca$_2$Cu$_3$O$_{10+z}$ single crystals. Similarly to the other cuprates' cases, a gap-like conductivity suppression was observed with reducing the temperature from above $T_{\mathrm{c}}$, creating a peak in the conductivity spectrum. The conductivity peak energy was insensitive to the doping level, namely $T_{\mathrm{c}}$, which suggests that this gap is not a superconducting gap but is related to the pseudogap. Comparing the data of various mono-, double-, and triple-layer cuprates, we found a clear correlation between the optimal $T_{\mathrm{c}}$ of each material and the pseudogap-related conductivity peak energy. △ Less

Submitted 6 August, 2024; originally announced August 2024.

Comments: 12 pages, 5 figures

Journal ref: J. Phys. Soc. Jpn. 93, 103701 (2024)

Diffraction modelling of a 2023 March 5 stellar occultation by subkilometer-sized asteroid (98943) 2001 CC21

Authors: Ko Arimatsu, Fumi Yoshida, Tsutomu Hayamizu, Miyoshi Ida, George L Hashimoto, Takashi Abe, Hiroshi Akitaya, Akari Aratani, Hidekazu Fukuda, Yasuhide Fujita, Takao Fujiwara, Toshihiro Horikawa, Tamio Iihoshi, Kazuyoshi Imamura, Ryo Imazawa, Hisashi Kasebe, Ryosuke Kawasaki, Hiroshi Kishimoto, Kazuhisa Mishima, Machiko Miyachi, Masanori Mizutani, Maya Nakajima, Hiroyoshi Nakatani, Kazuhiko Okamura, Misaki Okanobu , et al. (9 additional authors not shown)

Abstract: We present an analysis of a stellar occultation event caused by a near-Earth asteroid (98943) 2001 CC21, an upcoming flyby target in the Hayabusa2 extended mission, on March 5, 2023. To accurately determine the asteroid's shape from diffraction-affected light curves, we developed a novel data reduction technique named the Diffracted Occultation's United Simulator for Highly Informative Transient E… ▽ More We present an analysis of a stellar occultation event caused by a near-Earth asteroid (98943) 2001 CC21, an upcoming flyby target in the Hayabusa2 extended mission, on March 5, 2023. To accurately determine the asteroid's shape from diffraction-affected light curves, we developed a novel data reduction technique named the Diffracted Occultation's United Simulator for Highly Informative Transient Explorations (DOUSHITE). Using DOUSHITE-generated synthetic models, we derived constraints on (98943) 2001 CC21's shadow shape from the single-chord occultation data. Our results suggest a significant elongation of the shadow with an axis ratio of $b/a = 0.37\pm0.09$. This shape can be crucial for planning Hayabusa2's high-speed flyby to optimise the limited imaging opportunities. △ Less

Submitted 29 July, 2024; originally announced July 2024.

Comments: 10 pages, 9 figures, PASJ accepted

Journal ref: Publications of the Astronomical Society of Japan (2024) psae060

A Study on Unsupervised Anomaly Detection and Defect Localization using Generative Model in Ultrasonic Non-Destructive Testing

Authors: Yusaku Ando, Miya Nakajima, Takahiro Saitoh, Tsuyoshi Kato

Abstract: In recent years, the deterioration of artificial materials used in structures has become a serious social issue, increasing the importance of inspections. Non-destructive testing is gaining increased demand due to its capability to inspect for defects and deterioration in structures while preserving their functionality. Among these, Laser Ultrasonic Visualization Testing (LUVT) stands out because… ▽ More In recent years, the deterioration of artificial materials used in structures has become a serious social issue, increasing the importance of inspections. Non-destructive testing is gaining increased demand due to its capability to inspect for defects and deterioration in structures while preserving their functionality. Among these, Laser Ultrasonic Visualization Testing (LUVT) stands out because it allows the visualization of ultrasonic propagation. This makes it visually straightforward to detect defects, thereby enhancing inspection efficiency. With the increasing number of the deterioration structures, challenges such as a shortage of inspectors and increased workload in non-destructive testing have become more apparent. Efforts to address these challenges include exploring automated inspection using machine learning. However, the lack of anomalous data with defects poses a barrier to improving the accuracy of automated inspection through machine learning. Therefore, in this study, we propose a method for automated LUVT inspection using an anomaly detection approach with a diffusion model that can be trained solely on negative examples (defect-free data). We experimentally confirmed that our proposed method improves defect detection and localization compared to general object detection algorithms used previously. △ Less

Submitted 26 May, 2024; originally announced May 2024.

Role of Vanadium-Oxide Layer in Electronic State of Sr$_2$VFeAsO$_{3-δ}$ with Oxygen Deficiency

Authors: Masamichi Nakajima, Hiroaki Yokota, Taihei Wakimura, Tetsuya Takeuchi, Koya Nakamura, Mitsuharu Yashima, Hidekazu Mukuda, Shigeki Miyasaka, Setsuko Tajima

Abstract: Iron-based superconductor Sr$_2$VFeAsO$_3$ is composed of alternate stacking of a superconducting FeAs layer and an insulating vanadium-oxide layer with a perovskite-type structure. Electronic orders stemming from the spin and orbital degrees of freedom of V $3d$ electrons can arise in the vanadium-oxide layer, but such orders have not been confirmed so far. Here, we systematically investigate the… ▽ More Iron-based superconductor Sr$_2$VFeAsO$_3$ is composed of alternate stacking of a superconducting FeAs layer and an insulating vanadium-oxide layer with a perovskite-type structure. Electronic orders stemming from the spin and orbital degrees of freedom of V $3d$ electrons can arise in the vanadium-oxide layer, but such orders have not been confirmed so far. Here, we systematically investigate the electronic state of Sr$_2$VFeAsO$_{3-δ}$ with oxygen deficiency and demonstrate the phase diagram of Sr$_2$VFeAsO$_{3-δ}$ as a function of the $c$-axis lattice parameter, which has turned out to be a suitable measure of the amount of oxygen deficiency. We found a magnetic and structural anomaly at $\sim 100$ K with a thermal hysteresis, which is manifested with the introduction of oxygen deficiency. The presence of orthorhombic distortion was revealed below the temperature at which the anomaly appears, suggestive of V orbital ordering involving the $d_{xz}$ and $d_{yz}$ orbitals. It seems that substantial fluctuations associated with the orthorhombic distortion significantly influence the electronic state of the FeAs layer. Our findings indicate that the vanadium-oxide layer plays a significant role in the electronic state of Sr$_2$VFeAsO$_{3-δ}$. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: 10 pages, 9 figures

Journal ref: J. Phys. Soc. Jpn. 93, 054711 (2024)

The Limited Role of the Streaming Instability During Moon and Exomoon Formation

Authors: Miki Nakajima, Jeremy Atkins, Jacob B. Simon, Alice C. Quillen

Abstract: It is generally accepted that the Moon accreted from the disk formed by an impact between the proto-Earth and impactor, but its details are highly debated. Some models suggest that a Mars-sized impactor formed a silicate melt-rich (vapor-poor) disk around Earth, whereas other models suggest that a highly energetic impact produced a silicate vapor-rich disk. Such a vapor-rich disk, however, may not… ▽ More It is generally accepted that the Moon accreted from the disk formed by an impact between the proto-Earth and impactor, but its details are highly debated. Some models suggest that a Mars-sized impactor formed a silicate melt-rich (vapor-poor) disk around Earth, whereas other models suggest that a highly energetic impact produced a silicate vapor-rich disk. Such a vapor-rich disk, however, may not be suitable for the Moon formation, because moonlets, building blocks of the Moon, of 100 m-100 km may experience strong gas drag and fall onto Earth on a short timescale, failing to grow further. This problem may be avoided if large moonlets ($\gg 100$ km) form very quickly by streaming instability, which is a process to concentrate particles enough to cause gravitational collapse and rapid formation of planetesimals or moonlets. Here, we investigate the effect of the streaming instability in the Moon-forming disk for the first time and find that this instability can quickly form $\sim 100$ km-sized moonlets. However, these moonlets are not large enough to avoid strong drag and they still fall onto Earth quickly. This suggests that the vapor-rich disks may not form the large Moon, and therefore the models that produce vapor-poor disks are supported. This result is applicable to general impact-induced moon-forming disks, supporting the previous suggestion that small planets ($<1.6 R_\oplus$) are good candidates to host large moons because their impact-induced disks would be likely vapor-poor. We find a limited role of streaming instability in a satellite formation in an impact-induced disk, whereas it plays a key role during planet formation. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Comments: Accepted for Publication in PSJ

Journal ref: 2024, The Planetary Science Journal, 5, 145

Brain-aligning of semantic vectors improves neural decoding of visual stimuli

Authors: Shirin Vafaei, Ryohei Fukuma, Takufumi Yanagisawa, Huixiang Yang, Satoru Oshino, Naoki Tani, Hui Ming Khoo, Hidenori Sugano, Yasushi Iimura, Hiroharu Suzuki, Madoka Nakajima, Kentaro Tamura, Haruhiko Kishima

Abstract: The development of algorithms to accurately decode of neural information is a long-standing effort in the field of neuroscience. Brain decoding is typically employed by training machine learning models to map neural data onto a preestablished vector representation of stimulus features. These vectors are usually derived from image- and/or text-based feature spaces. Nonetheless, the intrinsic charac… ▽ More The development of algorithms to accurately decode of neural information is a long-standing effort in the field of neuroscience. Brain decoding is typically employed by training machine learning models to map neural data onto a preestablished vector representation of stimulus features. These vectors are usually derived from image- and/or text-based feature spaces. Nonetheless, the intrinsic characteristics of these vectors might be fundamentally different than those encoded by the brain, limiting the ability of algorithms to accurately learn this mapping. To address this issue, here, we propose a representation learning framework, called brain-aligning of semantic vectors, that fine-tunes pretrained feature vectors to better align with the structure of neural representations of visual stimuli in the human brain. We trained this model with functional magnetic resonance imaging (fMRI) data representing 150 visual stimulus categories; then, we performed zero-shot brain decoding on 1) fMRI, 2) magnetoencephalography (MEG), and 3) electrocorticography (ECoG) data reflecting neural representations of visual stimuli. By using fMRI-based brain-aligned vectors, the zero-shot decoding accuracy all three neuroimaging datasets increased. This finding underscores the potential of leveraging a richer array of brainderived features to increase the performance of brain decoding algorithms. △ Less

Submitted 12 September, 2024; v1 submitted 22 March, 2024; originally announced March 2024.

Comments: 40 pages, 5 figures

Subharmonic lock-in detection and its optimisation for femtosecond noise correlation spectroscopy

Authors: M. A. Weiss, F. S. Herbst, S. Eggert, M. Nakajima, A. Leitenstorfer, S. T. B. Goennenwein, T. Kurihara

Abstract: Although often viewed as detrimental, fluctuations carry valuable information about the physical system from which they emerge. Femtosecond noise correlation spectroscopy (FemNoC) has recently been established to probe the ultrafast fluctuation dynamics of thermally populated magnons by measurement of their amplitude autocorrelation. Subharmonic lock-in detection is the key technique in this metho… ▽ More Although often viewed as detrimental, fluctuations carry valuable information about the physical system from which they emerge. Femtosecond noise correlation spectroscopy (FemNoC) has recently been established to probe the ultrafast fluctuation dynamics of thermally populated magnons by measurement of their amplitude autocorrelation. Subharmonic lock-in detection is the key technique in this method, allowing to extract the pulse-to-pulse polarisation fluctuations of two femtosecond optical pulse trains transmitted through a magnetic sample. Here, we present a thorough technical description of the subharmonic demodulation technique and of the FemNoC measurement system. We mathematically model the data acquisition process and identify the essential parameters which critically influence the signal-to-noise ratio of the signals. Comparing the model calculations to real datasets allows validating the predicted parameter dependences and provides a means to optimise FemNoC experiments. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Journal ref: Rev. Sci. Instrum. 95, 083005 (2024)

Large planets may not form fractionally large moons

Authors: Miki Nakajima, Hidenori Genda, Erik Asphaug, Shigeru Ida

Abstract: One of the unique aspects of Earth is that it has a fractionally large Moon, which is thought to have formed from a Moon-forming disk generated by a giant impact. The Moon stabilizes the Earth's spin axis at least by several degrees and contributes to Earth's stable climate. Given that impacts are common during planet formation, exomoons, which are moons around planets in extrasolar systems, shoul… ▽ More One of the unique aspects of Earth is that it has a fractionally large Moon, which is thought to have formed from a Moon-forming disk generated by a giant impact. The Moon stabilizes the Earth's spin axis at least by several degrees and contributes to Earth's stable climate. Given that impacts are common during planet formation, exomoons, which are moons around planets in extrasolar systems, should be common as well, but no exomoon has been confirmed. Here we propose that an initially vapor-rich moon-forming disk is not capable of forming a large moon because growing moonlets, which are building blocks of a moon, experience strong gas drag and quickly fall toward the planet. Our impact simulations show that terrestrial and icy planets that are larger than $\sim 1.3-1.6 R_\oplus$ produce entirely vapor disks, which fail to form a large moon. This indicates that (1) our model supports the Moon-formation models that produce vapor-poor disks and (2) rocky and icy exoplanets whose radii are smaller than $\sim 1.6 R_\oplus$ are ideal candidates for hosting fractionally large exomoons. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Comments: This paper was published in 2022

Journal ref: Nature Communications 13, 568 (2022)

Development of the Lifelike Head Unit for a Humanoid Cybernetic Avatar `Yui' and Its Operation Interface

Authors: Mizuki Nakajima, Kaoruko Shinkawa, Yoshihiro Nakata

Abstract: In the context of avatar-mediated communication, it is crucial for the face-to-face interlocutor to sense the operator's presence and emotions via the avatar. Although androids resembling humans have been developed to convey presence through appearance and movement, few studies have prioritized deepening the communication experience for both operator and interlocutor using android robot as an avat… ▽ More In the context of avatar-mediated communication, it is crucial for the face-to-face interlocutor to sense the operator's presence and emotions via the avatar. Although androids resembling humans have been developed to convey presence through appearance and movement, few studies have prioritized deepening the communication experience for both operator and interlocutor using android robot as an avatar. Addressing this gap, we introduce the ``Cybernetic Avatar `Yui','' featuring a human-like head unit with 28 degrees of freedom, capable of expressing gaze, facial emotions, and speech-related mouth movements. Through an eye-tracking unit in a Head-Mounted Display (HMD) and degrees of freedom on both eyes of Yui, operators can control the avatar's gaze naturally. Additionally, microphones embedded in Yui's ears allow operators to hear surrounding sounds in three dimensions, enabling them to discern the direction of calls based solely on auditory information. An HMD's face-tracking unit synchronizes the avatar's facial movements with those of the operator. This immersive interface, coupled with Yui's human-like appearance, enables real-time emotion transmission and communication, enhancing the sense of presence for both parties. Our experiments demonstrate Yui's facial expression capabilities, and validate the system's efficacy through teleoperation trials, suggesting potential advancements in avatar technology. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 13pages, 19 figures

Journal ref: IEEE Access, vol. 12, pp.23930 -- 23942, 2024

Ncorpi$\mathcal{O}$N : A $\mathcal{O}(N)$ software for N-body integration in collisional and fragmenting systems

Authors: Jérémy Couturier, Alice C. Quillen, Miki Nakajima

Abstract: Ncorpi$\mathcal{O}$N is a $N$-body software developed for the time-efficient integration of collisional and fragmenting systems of planetesimals or moonlets orbiting a central mass. It features a fragmentation model, based on crater scaling and ejecta models, able to realistically simulate a violent impact. The user of Ncorpi$\mathcal{O}$N can choose between four different built-in modules to comp… ▽ More Ncorpi$\mathcal{O}$N is a $N$-body software developed for the time-efficient integration of collisional and fragmenting systems of planetesimals or moonlets orbiting a central mass. It features a fragmentation model, based on crater scaling and ejecta models, able to realistically simulate a violent impact. The user of Ncorpi$\mathcal{O}$N can choose between four different built-in modules to compute self-gravity and detect collisions. One of these makes use of a mesh-based algorithm to treat mutual interactions in $\mathcal{O}(N)$ time. Another module, much more efficient than the standard Barnes-Hut tree code, is a $\mathcal{O}(N)$ tree-based algorithm called FalcON. It relies on fast multipole expansion for gravity computation and we adapted it to collision detection as well. Computation time is reduced by building the tree structure using a three-dimensional Hilbert curve. For the same precision in mutual gravity computation, Ncorpi$\mathcal{O}$N is found to be up to 25 times faster than the famous software REBOUND. Ncorpi$\mathcal{O}$N is written entirely in the C language and only needs a C compiler to run. A python add-on, that requires only basic python libraries, produces animations of the simulations from the output files. The name Ncorpi$\mathcal{O}$N, reminding of a scorpion, comes from the French $N$-corps, meaning $N$-body, and from the mathematical notation $\mathcal{O}(N)$, due to the running time of the software being almost linear in the total number $N$ of moonlets. Ncorpi$\mathcal{O}$N is designed for the study of accreting or fragmenting disks of planetesimal or moonlets. It detects collisions and computes mutual gravity faster than REBOUND, and unlike other $N$-body integrators, it can resolve a collision by fragmentation. The fast multipole expansions are implemented up to order six to allow for a high precision in mutual gravity computation. △ Less

Submitted 26 March, 2024; v1 submitted 31 October, 2023; originally announced October 2023.

Comments: 21 pages, 6 figures, 2 schemas

MSC Class: 70F10

Effect of Equation of State and Cutoff Density in Smoothed Particle Hydrodynamics Simulations of the Moon-Forming Giant Impact

Authors: Scott D. Hull, Miki Nakajima, Natsuki Hosono, Robin M. Canup, Rene Gassmöller

Abstract: The amount of vapor in the impact-generated protolunar disk carries implications for the dynamics, devolatilization, and moderately volatile element (MVE) isotope fractionation during lunar formation. The equation of state (EoS) used in simulations of the giant impact is required to calculate the vapor mass fraction (VMF) of the modeled protolunar disk. Recently, a new version of M-ANEOS ("Stewart… ▽ More The amount of vapor in the impact-generated protolunar disk carries implications for the dynamics, devolatilization, and moderately volatile element (MVE) isotope fractionation during lunar formation. The equation of state (EoS) used in simulations of the giant impact is required to calculate the vapor mass fraction (VMF) of the modeled protolunar disk. Recently, a new version of M-ANEOS ("Stewart M-ANEOS") was released with an improved treatment of heat capacity and expanded experimental Hugoniot. Here, we compare this new M-ANEOS version with a previous version ("N-SPH M-ANEOS") and assess the resulting differences in smoothed particle hydrodynamics (SPH) simulations. We find that Stewart M-ANEOS results in cooler disks with smaller values of VMF and results in differences in disk mass that are dependent on the initial impact angle. We also assess the implications of the minimum "cutoff" density ($ρ_{c}$), similar to a maximum smoothing length, that is set as a fast-computing alternative to an iteratively calculated smoothing length. We find that the low particle resolution of the disk typically results in $>40\%$ of disk particles falling to $ρ_c$, influencing the dynamical evolution and VMF of the disk. Our results show that choice of EoS, $ρ_{c}$, and particle resolution can cause the VMF and disk mass to vary by tens of percent. Moreover, small values of $ρ_{c}$ produce disks that are prone to numerical instability and artificial shocks. We recommend that future giant impact SPH studies review smoothing methods and ensure the thermodynamic stability of the disk over simulated time. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Comments: To be published in The Planetary Science Journal, 51 pages, 34 figures, 4 tables

Wind erosion and transport on planetesimals

Authors: Alice C. Quillen, Stephen Luniewski, Adam E. Rubinstein, Jeremy Couturier, Rachel Glade, Miki Nakajima

Abstract: We consider the possibility that aeolian (wind blown) processes occur on small, 1 to 100~km diameter, planetesimals when they were embedded in the protosolar nebula. Drag from a headwind within a protostellar disk is sufficiently large to loft cm and smaller sized particles off the surface of a 10 km diameter asteroid in the inner solar system (at a few AU), and micron sized particles off the surf… ▽ More We consider the possibility that aeolian (wind blown) processes occur on small, 1 to 100~km diameter, planetesimals when they were embedded in the protosolar nebula. Drag from a headwind within a protostellar disk is sufficiently large to loft cm and smaller sized particles off the surface of a 10 km diameter asteroid in the inner solar system (at a few AU), and micron sized particles off the surface of a 10 km diameter object in the Transneptunian region. The headwind is sufficiently strong to overcome surface cohesion in the inner solar system, but not in the outer solar system. However, in the outer solar system, surface particles can be redistributed or escape due to impacts from particles that are in the protosolar disk's wind. Based on scaling crater ejecta, we estimate that impacts from particles in the headwind will lead to erosion of mass rather than accretion for planetesimals below about 6 km in diameter. The erosion limit is independent of material strength but proportional to the wind velocity. We explore the sensitivity of splash particle trajectories to particle size, headwind velocity and Reynolds number. Winds from a protostellar disk could account for Kuiper Belt Object (486958) Arrokoth's smooth undulating terrain but only during an epoch of high particle flux and low wind velocity. These conditions could have been present during and just after coalescence of Arrokoth's building blocks. △ Less

Submitted 25 April, 2025; v1 submitted 14 October, 2023; originally announced October 2023.

Comments: Definitions of $g_Σ, g_T$ corrected

An improved model of metal/silicate differentiation during Earth's accretion

Authors: K. I. Dale, D. C. Rubie, M. Nakajima, S. Jacobson, G. Nathan, G. J. Golabek, S. Cambioni, A. Morbidelli

Abstract: We improved the algorithm presented in Rubie et al. (2015) to model the chemical evolution of Earth driven by iron/silicate differentiation during the planet's accretion. The pressure at which the equilibration occurs during a giant impact is no longer a free parameter but is determined by the smooth particle hydrodynamic (SPH) simulations of Nakajima et al. (2021). Moreover, impacting planetesima… ▽ More We improved the algorithm presented in Rubie et al. (2015) to model the chemical evolution of Earth driven by iron/silicate differentiation during the planet's accretion. The pressure at which the equilibration occurs during a giant impact is no longer a free parameter but is determined by the smooth particle hydrodynamic (SPH) simulations of Nakajima et al. (2021). Moreover, impacting planetesimals are now assumed to be too small to cause melting and differentiation and thus their materials are stored in the crystalline upper mantle of the growing planet until a hydrostatically relaxed global magma ocean forms in the aftermath of a giant impact, whose depth is also estimated from Nakajima et al. (2021). With these changes, not all dynamical simulations lead to a satisfactory reproduction of the chemical composition of the bulk silicate Earth (BSE). Thus, the latter becomes diagnostic of the success of dynamical models. In the successful cases also the BSE abundances of W and Mo can be reproduced, that were previously hard to fit (Jennings et al., 2021). △ Less

Submitted 8 August, 2023; originally announced August 2023.

Comments: Accepted in Icarus

Simulation-Aided Deep Learning for Laser Ultrasonic Visualization Testing

Authors: Miya Nakajima, Takahiro Saitoh, Tsuyoshi Kato

Abstract: In recent years, laser ultrasonic visualization testing (LUVT) has attracted much attention because of its ability to efficiently perform non-contact ultrasonic non-destructive testing.Despite many success reports of deep learning based image analysis for widespread areas, attempts to apply deep learning to defect detection in LUVT images face the difficulty of preparing a large dataset of LUVT im… ▽ More In recent years, laser ultrasonic visualization testing (LUVT) has attracted much attention because of its ability to efficiently perform non-contact ultrasonic non-destructive testing.Despite many success reports of deep learning based image analysis for widespread areas, attempts to apply deep learning to defect detection in LUVT images face the difficulty of preparing a large dataset of LUVT images that is too expensive to scale. To compensate for the scarcity of such training data, we propose a data augmentation method that generates artificial LUVT images by simulation and applies a style transfer to simulated LUVT images.The experimental results showed that the effectiveness of data augmentation based on the style-transformed simulated images improved the prediction performance of defects, rather than directly using the raw simulated images for data augmentation. △ Less

Submitted 29 May, 2023; originally announced May 2023.

A Study on Deep CNN Structures for Defect Detection From Laser Ultrasonic Visualization Testing Images

Authors: Miya Nakajima, Takahiro Saitoh, Tsuyoshi Kato

Abstract: The importance of ultrasonic nondestructive testing has been increasing in recent years, and there are high expectations for the potential of laser ultrasonic visualization testing, which combines laser ultrasonic testing with scattered wave visualization technology. Even if scattered waves are visualized, inspectors still need to carefully inspect the images. To automate this, this paper proposes… ▽ More The importance of ultrasonic nondestructive testing has been increasing in recent years, and there are high expectations for the potential of laser ultrasonic visualization testing, which combines laser ultrasonic testing with scattered wave visualization technology. Even if scattered waves are visualized, inspectors still need to carefully inspect the images. To automate this, this paper proposes a deep neural network for automatic defect detection and localization in LUVT images. To explore the structure of a neural network suitable to this task, we compared the LUVT image analysis problem with the generic object detection problem. Numerical experiments using real-world data from a SUS304 flat plate showed that the proposed method is more effective than the general object detection model in terms of prediction performance. We also show that the computational time required for prediction is faster than that of the general object detection model. △ Less

Submitted 23 May, 2023; originally announced May 2023.

Long-Term Density Trend in the Mesosphere and Lower Thermosphere from Occultations of the Crab Nebula with X-Ray Astronomy Satellites

Authors: Satoru Katsuda, Teruaki Enoto, Andrea N. Lommen, Koji Mori, Yuko Motizuki, Motoki Nakajima, Nathaniel C. Ruhl, Kosuke Sato, Gunter Stober, Makoto S. Tashiro, Yukikatsu Terada, Kent S. Wood

Abstract: We present long-term density trends of the Earth's upper atmosphere at altitudes between 71 and 116 km, based on atmospheric occultations of the Crab Nebula observed with X-ray astronomy satellites, ASCA, RXTE, Suzaku, NuSTAR, and Hitomi. The combination of the five satellites provides a time period of 28 yr from 1994 to 2022. To suppress seasonal and latitudinal variations, we concentrate on the… ▽ More We present long-term density trends of the Earth's upper atmosphere at altitudes between 71 and 116 km, based on atmospheric occultations of the Crab Nebula observed with X-ray astronomy satellites, ASCA, RXTE, Suzaku, NuSTAR, and Hitomi. The combination of the five satellites provides a time period of 28 yr from 1994 to 2022. To suppress seasonal and latitudinal variations, we concentrate on the data taken in autumn (49< doy <111) and spring (235< doy <297) in the northern hemisphere with latitudes of 0--40 degrees. With this constraint, local times are automatically limited either around noon or midnight. We obtain four sets (two seasons times two local times) of density trends at each altitude layer. We take into account variations due to a linear trend and the 11-yr solar cycle using linear regression techniques. Because we do not see significant differences among the four trends, we combine them to provide a single vertical profile of trend slopes. We find a negative density trend of roughly -5 %/decade at every altitude. This is in reasonable agreement with inferences from settling rate of the upper atmosphere. In the 100--110 km altitude, we found an exceptionally high density decline of about -12 %/decade. This peak may be the first observational evidence for strong cooling due to water vapor and ozone near 110 km, which was first identified in a numerical simulation by Akmaev et al. (2006). Further observations and numerical simulations with suitable input parameters are needed to establish this feature. △ Less

Submitted 24 January, 2023; originally announced February 2023.

Comments: 38 pages, 9 figures, accepted for publication in Journal of Geophysical Research - Space Physics

Ultrafast spontaneous spin switching in an antiferromagnet

Authors: Marvin A. Weiss, Andreas Herbst, Julius Schlegel, Tobias Dannegger, Martin Evers, Andreas Donges, Makoto Nakajima, Alfred Leitenstorfer, Sebastian T. B. Goennenwein, Ulrich Nowak, Takayuki Kurihara

Abstract: Owing to their high magnon frequencies, antiferromagnets are key materials for future high-speed spintronics. Picosecond switching of antiferromagnetic order has been viewed a milestone for decades and pursued only by using ultrafast external perturbations. Here, we show that picosecond spin switching occurs spontaneously due to thermal fluctuations in the antiferromagnetic orthoferrite Sm0.7Er0.3… ▽ More Owing to their high magnon frequencies, antiferromagnets are key materials for future high-speed spintronics. Picosecond switching of antiferromagnetic order has been viewed a milestone for decades and pursued only by using ultrafast external perturbations. Here, we show that picosecond spin switching occurs spontaneously due to thermal fluctuations in the antiferromagnetic orthoferrite Sm0.7Er0.3FeO3. By analysing the correlation between the pulse-to-pulse polarisation fluctuations of two femtosecond optical probes, we extract the autocorrelation of incoherent magnon fluctuations. We observe a strong enhancement of the magnon fluctuation amplitude and the coherence time around the critical temperature of the spin reorientation transition. The spectrum shows two distinct modes, one corresponding to the quasi-ferromagnetic mode and another one which has not been previously reported in pump-probe experiments. Comparison to a stochastic spin dynamics simulation reveals this new mode as smoking gun of ultrafast spontaneous spin switching within the double-well anisotropy potential. △ Less

Submitted 5 January, 2023; originally announced January 2023.

Comments: 11 page main manuscript and 4 page Supplementary Material, 5 main figures and 5 Supplementary Figures

Journal ref: Nature Communications 14, 7651 (2023)

Quantum Feature Extraction for THz Multi-Layer Imaging

Authors: Toshiaki Koike-Akino, Pu Wang, Genki Yamashita, Wataru Tsujita, Makoto Nakajima

Abstract: A learning-based THz multi-layer imaging has been recently used for contactless three-dimensional (3D) positioning and encoding. We show a proof-of-concept demonstration of an emerging quantum machine learning (QML) framework to deal with depth variation, shadow effect, and double-sided content recognition, through an experimental validation. A learning-based THz multi-layer imaging has been recently used for contactless three-dimensional (3D) positioning and encoding. We show a proof-of-concept demonstration of an emerging quantum machine learning (QML) framework to deal with depth variation, shadow effect, and double-sided content recognition, through an experimental validation. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Comments: 2 pages, 5 figures, IRMMW-THz2022

Discovery of a new supergiant fast X-ray transient MAXI J0709-159 associated with the Be star LY CMa

Authors: Mutsumi Sugizaki, Tatehiro Mihara, Kohei Kobayashi, Hitoshi Negoro, Megumi Shidatsu, Sean N. Pike, Wataru Iwakiri, Sota Urabe, Motoko Serino, Nobuyuki Kawai, Motoki Nakajima, Jamie A. Kennea, Zhu Liu

Abstract: We report on the discovery of a new supergiant fast X-ray transient (SFXT), MAXI J0709$-$159, and its identification with LY CMa (also known as HD 54786). On 2022 January 25, a new flaring X-ray object named MAXI J0709$-$159, was detected by Monitor of All-sky X-ray Image (MAXI). Two flaring activities were observed in the two scans of $\sim 3$ hours apart, where the 2-10 keV flux reached… ▽ More We report on the discovery of a new supergiant fast X-ray transient (SFXT), MAXI J0709$-$159, and its identification with LY CMa (also known as HD 54786). On 2022 January 25, a new flaring X-ray object named MAXI J0709$-$159, was detected by Monitor of All-sky X-ray Image (MAXI). Two flaring activities were observed in the two scans of $\sim 3$ hours apart, where the 2-10 keV flux reached $5\times 10^{-9}$ erg cm$^{-2}$ s$^{-1}$. During the period, the source exhibited a large spectral change suggesting that the absorption column density $N_\mathrm{H}$ increased from $10^{22}$ cm$^{-2}$ to $10^{23}$ cm$^{-2}$. NuSTAR follow-up observation on January 29 identified a new X-ray source with a flux of $6\times 10^{-13}$ erg cm$^{-2}$ s$^{-1}$ at the position consistent with LY CMa, which has been identified as B supergiant as well as Be star, located at the 3 kpc distance. The observed X-ray activity characterized by the short ($\lesssim$ several hours) duration, the rapid ($\lesssim$ a few seconds) variabilities accompanied with spectral changes, and the large luminosity swing ($10^{32}$-$10^{37}$ erg s$^{-1}$) agree with those of SFXT. On the other hand, optical spectroscopic observations of LY CMa revealed a broad $Hα$ emission line, which may indicate the existence of a Be circumstellar disk. These obtained results suggest that the optical companion, LY CMa, certainly has a complex circumstellar medium including dense clumps. △ Less

Submitted 6 July, 2022; v1 submitted 5 July, 2022; originally announced July 2022.

Comments: 13 pages, 10 figures, accepted for publication in PASJ (v2. author names in metadata are modified.)

Development of an interactive code for quick data analyses between STOR-M tokamak experimental plasma discharges

Authors: Masaru Nakajima, Debjyoti Basu, A. V. Melnikov, David McColl, Chijin Xiao

Abstract: Saskatchewan Torus-Modified (STOR-M) is a small tokamak, well known for various fusion related basic experimental studies such as edge turbulent heating, different instabilities, AC (alternating current) tokamak operation, Ohmic H-mode triggering by the electrode biasing, fueling and momentum injection by Compact Torus (CT) injection, and effects of Resonance Magnetic Perturbations (RMP), among ot… ▽ More Saskatchewan Torus-Modified (STOR-M) is a small tokamak, well known for various fusion related basic experimental studies such as edge turbulent heating, different instabilities, AC (alternating current) tokamak operation, Ohmic H-mode triggering by the electrode biasing, fueling and momentum injection by Compact Torus (CT) injection, and effects of Resonance Magnetic Perturbations (RMP), among others. Some of those experiments require real time visualization of magnetic surface reconstructions either through EFIT or quick analyses and visualization of experimental data during experiments. Recently experimental studies of Geodesic Acoustic Mode (GAM) and zonal flows had been performed in STOR-M tokamak. The GAM experiments strongly require collection of fluctuations data from different Langmuir probes installed at different poloidal locations, but on the same magnetic surfaces. This is need of the adjustment of radial locations between discharges. It is therefore important to analyze and visualize the features of all probe data quickly during discharges. For this purpose, a Python code has been developed and used for quick analyze of data. This article will describe the development of the code using Python and its use in detail. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Physical Deep Learning with Biologically Plausible Training Method

Authors: Mitsumasa Nakajima, Katsuma Inoue, Kenji Tanaka, Yasuo Kuniyoshi, Toshikazu Hashimoto, Kohei Nakajima

Abstract: The ever-growing demand for further advances in artificial intelligence motivated research on unconventional computation based on analog physical devices. While such computation devices mimic brain-inspired analog information processing, learning procedures still relies on methods optimized for digital processing such as backpropagation. Here, we present physical deep learning by extending a biolo… ▽ More The ever-growing demand for further advances in artificial intelligence motivated research on unconventional computation based on analog physical devices. While such computation devices mimic brain-inspired analog information processing, learning procedures still relies on methods optimized for digital processing such as backpropagation. Here, we present physical deep learning by extending a biologically plausible training algorithm called direct feedback alignment. As the proposed method is based on random projection with arbitrary nonlinear activation, we can train a physical neural network without knowledge about the physical system. In addition, we can emulate and accelerate the computation for this training on a simple and scalable physical system. We demonstrate the proof-of-concept using a hierarchically connected optoelectronic recurrent neural network called deep reservoir computer. By constructing an FPGA-assisted optoelectronic benchtop, we confirmed the potential for accelerated computation with competitive performance on benchmarks. Our results provide practical solutions for the training and acceleration of neuromorphic computation. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Geophysical Evolution During Rocky Planet Formation

Authors: Tim Lichtenberg, Laura K. Schaefer, Miki Nakajima, Rebecca A. Fischer

Abstract: Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and ear… ▽ More Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and early evolution, and how these map onto the astrophysical timeline and varying accretion environments of planetary growth. The evolution of the coupled core-mantle-atmosphere system of growing protoplanets diverges in thermal, compositional, and structural states to first order, and ultimately shapes key planetary characteristics that can discern planets harboring clement surface conditions from those that do not. Astronomical campaigns seeking to investigate rocky exoplanets will require significant advances in laboratory characterization of planetary materials and time- and spatially-resolved theoretical models of planetary evolution, to extend planetary science beyond the Solar System and constrain the origins and frequency of habitable worlds like our own. △ Less

Submitted 18 March, 2022; originally announced March 2022.

Comments: 37 pages, 10 figures; under review for publication as a chapter in Protostars and Planets VII, University of Arizona Press; comments welcome; figures available at https://osf.io/rcjt7

Spin canting in nonlinear terahertz magnon dynamics revealed by magnetorefractive probing in orthoferrite

Authors: Takayuki Kurihara, Motoaki Bamba, Hiroshi Watanabe, Makoto Nakajima, Tohru Suemoto

Abstract: We excite the spin precession in rare-earth orthoferrite YFeO3 by the magnetic field of intense terahertz pulse and probe its dynamics by transient absorption change in the near infrared. The observed waveforms contain quasi-ferromagnetic-mode magnon oscillation and its second harmonics with a comparably strong amplitude. The result can be explained by dielectric function derived from magnetorefra… ▽ More We excite the spin precession in rare-earth orthoferrite YFeO3 by the magnetic field of intense terahertz pulse and probe its dynamics by transient absorption change in the near infrared. The observed waveforms contain quasi-ferromagnetic-mode magnon oscillation and its second harmonics with a comparably strong amplitude. The result can be explained by dielectric function derived from magnetorefractive Hamiltonian. We reveal that the strong second harmonic signal microscopically originates from novel dynamics of the quasi-ferromagnetic mode magnon at nonlinear regime, wherein spin canting angle periodically oscillates. △ Less

Submitted 23 February, 2022; originally announced February 2022.

Comments: Main text: 11 pages including abstract, 4 figures and reference list. Supplemental Material: 11 pages including 4 figures and reference list

Journal ref: Communications Physics 6, 51 (2023)

Laboratory observation and astronomical search of 1-cyano propargyl radical, HCCCHCN

Authors: C. Cabezas, M. Nakajima, C. H. Chang, M. Agundez, Y. Endo, J. Cernicharo

Abstract: The reaction between carbon atoms and vinyl cyanide, CH2CHCN, is a formation route to interstellar 3-cyano propargyl radical, CH2C3N, a species that has recently been discovered in space. The 1-cyano propargyl radical (HC3HCN), an isomer of CH2C3N, is predicted to be produced in the same reaction at least twice more effciently than CH2C3N. Hence, HC3HCN is a plausible candidate to be observed in s… ▽ More The reaction between carbon atoms and vinyl cyanide, CH2CHCN, is a formation route to interstellar 3-cyano propargyl radical, CH2C3N, a species that has recently been discovered in space. The 1-cyano propargyl radical (HC3HCN), an isomer of CH2C3N, is predicted to be produced in the same reaction at least twice more effciently than CH2C3N. Hence, HC3HCN is a plausible candidate to be observed in space as well. We aim to generate the HC3HCN radical in the gas phase in order to investigate its rotational spectrum. The derived spectroscopic parameters for this species will be used to obtain reliable frequency predictions to support its detection in space.The HC3HCN radical was produced by an electric discharge, and its rotational spectrum was characterized using a Balle-Flygare narrowband-type Fourier-transform microwave spectrometer operating in the frequency region of 4-40 GHz. The spectral analysis was supported by high-level ab initio calculations. A total of 193 hyperfine components that originated from 12 rotational transitions, a- and b-type, were measured for the HC3HCN radical. The analysis allowed us to accurately determine 22 molecular constants, including rotational and centrifugal distortion constants as well as the fine and hyperfine constants. Transition frequency predictions were used to search for the HC3HCN radical in TMC-1 using the QUIJOTE survey between 30.1-50.4 GHz. We do not detect HC3HCN in TMC-1 and derive a 3sigma upper limit to its column density of 6.0e11 cm-2. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: Accepted: 17 October 2021

Thickness-induced crossover from strong to weak collective pinning in exfoliated FeTe$_{0.6}$Se$_{0.4}$ thin films at 1 T

Authors: Ryoya Nakamura, Masashi Tokuda, Mori Watanabe, Masamichi Nakajima, Kensuke Kobayashi, Yasuhiro Niimi

Abstract: We studied flux pinning in exfoliated FeTe$_{0.6}$Se$_{0.4}$ thin-film devices with a thickness $d$ from 30 to 150 nm by measuring the critical current density $J_{\mathrm{c}}$. In bulk FeTe$_{0.6}$Se$_{0.4}$, the flux pinning has been discussed in the framework of weak collective pinning, while there is little knowledge on the pinning mechanism in the thin-film region. From the thickness $d$ depe… ▽ More We studied flux pinning in exfoliated FeTe$_{0.6}$Se$_{0.4}$ thin-film devices with a thickness $d$ from 30 to 150 nm by measuring the critical current density $J_{\mathrm{c}}$. In bulk FeTe$_{0.6}$Se$_{0.4}$, the flux pinning has been discussed in the framework of weak collective pinning, while there is little knowledge on the pinning mechanism in the thin-film region. From the thickness $d$ dependence of $J_{\mathrm{c}}$ at a fixed magnetic field of 1 T, we found that the strong pinning is dominant below $d \approx 70$ nm, while the weak collective pinning becomes more important above $d \approx 100$ nm. This crossover thickness can be explained by the theoretical model proposed by van der Beek $\textit{et al}$ [Phys. Rev. B. ${\bf 66}$, 024523 (2002)]. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. B 104, 165412 (2021)

Ricochets on Asteroids II: Sensitivity of laboratory experiments of low velocity grazing impacts on substrate grain size

Authors: Esteban Wright, Alice C. Quillen, Paul Sanchez, Stephen R. Schwartz, Miki Nakajima, Hesam Askari, Peter Miklavcic

Abstract: We compare low velocity impacts that ricochet with the same impact velocity and impact angle into granular media with similar bulk density, porosity and friction coefficient but different mean grain size. The ratio of projectile diameter to mean grain length ranges from 4 in our coarsest medium to 50 in our finest sand. Using high speed video and fluorescent markers, we measure the ratio of pre- t… ▽ More We compare low velocity impacts that ricochet with the same impact velocity and impact angle into granular media with similar bulk density, porosity and friction coefficient but different mean grain size. The ratio of projectile diameter to mean grain length ranges from 4 in our coarsest medium to 50 in our finest sand. Using high speed video and fluorescent markers, we measure the ratio of pre- to post-impact horizontal and vertical velocity components, which we refer to as coefficients of restitution, and the angle of deflection caused by the impact in the horizontal plane. Coefficients of restitution are sensitive to mean grain size with the ratio associated with the horizontal velocity component about twice as large for our coarsest gravel as that for our finest sand. This implies that coefficients for hydro-static-like, drag-like and lift-like forces, used in empirical force laws, are sensitive to mean grain size. The coefficient that is most strongly sensitive to grain size is the lift coefficient which decreases by a factor of 3 between our coarsest and finest media. The deflection angles are largest in the coarser media and their size approximately depends on grain size to the 3/2 power. This scaling is matched with a model where momentum transfer takes place via collisions with individual grains. The dependence of impact mechanics on substrate size distribution should be considered in future models for populations of objects that impact granular asteroid surfaces. △ Less

Submitted 22 January, 2022; v1 submitted 13 September, 2021; originally announced September 2021.

Comments: Link to the high speed videos for the 4 experiments tracked and discussed: https://youtube.com/playlist?list=PLYnpHw29go3pCWwm554fwR6jNFvB5qVQn Submitted to the journal Icarus on September 12, 2021

Discovery of mesoscopic nematicity wave in iron-based superconductors

Authors: T. Shimojima, Y. Motoyui, T. Taniuchi, C. Bareille, S. Onari, H. Kontani, M. Nakajima, S. Kasahara, T. Shibauchi, Y. Matsuda, S. Shin

Abstract: Nematicity is ubiquitous in electronic phases of high transition temperature superconductors, particularly in iron-based superconductors (IBSCs). Order parameter that characterizes the nematic phase has been investigated in momentum space, but its real-space arrangement remains largely unclear. We use linear dichroism (LD) in low-temperature laser-photoemission electron microscope to map out the n… ▽ More Nematicity is ubiquitous in electronic phases of high transition temperature superconductors, particularly in iron-based superconductors (IBSCs). Order parameter that characterizes the nematic phase has been investigated in momentum space, but its real-space arrangement remains largely unclear. We use linear dichroism (LD) in low-temperature laser-photoemission electron microscope to map out the nematic order parameter of nonmagentic FeSe and antiferromagnetic BaFe2(As0.87P0.13)2. In contrast to the structural domains that have atomic-scale domain walls, the LD patterns in both materials show peculiar sinusoidal waves of electronic nematicity with mesoscopic wavelength. The analysis reveals that the nematic order has an extremely long coherence length, more than 1000 times longer than the unit cell. Our direct visualization of electronic spatial variation uncovers a new fundamental aspect of quantum liquid crystalline states of correlated electrons in IBSCs. △ Less

Submitted 7 September, 2021; v1 submitted 13 August, 2021; originally announced August 2021.

Comments: 15 pages, 4 figures, Supplementary materials

Journal ref: Science 373, 1122 (2021)

Complementary junction field-effect transistor logic gate operational at 300$^\circ$C with 1.4 V supply voltage

Authors: Mitsuaki Kaneko, Masashi Nakajima, Qimin Jin, Tsunenobu Kimoto

Abstract: Integrated circuits (ICs) that can operate at high temperature have a wide variety of applications in the fields of automotive, aerospace, space exploration, and deep-well drilling. Conventional silicon-based complementary metal-oxide-semiconductor (CMOS) circuits cannot work at higher than 200 $^\circ$C, leading to the use of wide bandgap semiconductor, especially silicon carbide (SiC). However,… ▽ More Integrated circuits (ICs) that can operate at high temperature have a wide variety of applications in the fields of automotive, aerospace, space exploration, and deep-well drilling. Conventional silicon-based complementary metal-oxide-semiconductor (CMOS) circuits cannot work at higher than 200 $^\circ$C, leading to the use of wide bandgap semiconductor, especially silicon carbide (SiC). However, high-density defects at an oxide-SiC interface make it impossible to predict electrical characteristics of SiC CMOS logic gates in a wide temperature range and high supply voltage (typically ${\geqq 15}$ V) is required to compensate their large logic threshold voltage shift. Here, we show that SiC complementary logic gates composed of p- and n-channel junction field-effect transistors (JFETs) operate at 300 $^\circ$C with a supply voltage as low as 1.4 V. The logic threshold voltage shift of the complementary JFET (CJFET) inverter is 0.2 V from room temperature to 300 $^\circ$C. Furthermore, temperature dependencies of the static and dynamic characteristics of the CJFET inverter are well explained by a simple analytical model of SiC JFETs. This allows us to perform electronic circuit simulation, leading to superior designability of complex circuits or memories based on SiC CJFET technology, which operate within a wide temperature range. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Comments: 30 pages, 4 figures, 2 supplementary figures

Evolution of charge dynamics in FeSe$_{1-x}$Te$_{x}$: Effects of electronic correlations and nematicity

Authors: M. Nakajima, K. Yanase, M. Kawai, D. Asami, T. Ishikawa, F. Nabeshima, Y. Imai, A. Maeda, S. Tajima

Abstract: We systematically studied in-plane optical conductivity of FeSe$_{1-x}$Te$_{x}$ thin films fabricated on CaF$_{2}$ substrates for $x$ = 0, 0.1, 0.2, and 0.4. This system shows a large enhancement of superconducting transition temperature $T_{\mathrm{c}}$ at $x \sim$ 0.2 and a gentle decrease in $T_{\mathrm{c}}$ with further increasing $x$. The low-energy optical conductivity spectrum is described… ▽ More We systematically studied in-plane optical conductivity of FeSe$_{1-x}$Te$_{x}$ thin films fabricated on CaF$_{2}$ substrates for $x$ = 0, 0.1, 0.2, and 0.4. This system shows a large enhancement of superconducting transition temperature $T_{\mathrm{c}}$ at $x \sim$ 0.2 and a gentle decrease in $T_{\mathrm{c}}$ with further increasing $x$. The low-energy optical conductivity spectrum is described by the sum of narrow and broad Drude components, associated with coherent and incoherent charge dynamics, respectively. With increasing Te content, the spectral weight of the narrow Drude component decreases, while the total weight of the two Drude components increases. As a consequence, the fraction of the narrow Drude weight significantly decreases, indicating that Te substitution leads to stronger electronic correlations. Below the nematic transition temperature, the narrow Drude weight decreases with decreasing temperature. This indicates the reduction of the coherent carrier density, resulting from the Fermi-surface modification induced by the development of the orbital order. The reduction of the narrow Drude weight with temperature stopped at $x \sim$ 0.2, corresponding to the disappearance of the nematic transition. Our result suggests that the increase in the coherent carrier density induced by the suppression of the nematic transition gives rise to the enhancement of $T_{\mathrm{c}}$. The decrease in $T_{\mathrm{c}}$ with further Te substitution likely arises from too strong electronic correlations, which are not favorable for superconductivity. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. B 104, 024512 (2021)

Control of band structure of FeSe single crystals via biaxial strain

Authors: M. Nakajima, Y. Ohata, S. Tajima

Abstract: We performed systematic transport measurements on FeSe single crystals with applying in-plane biaxial strain $\varepsilon$ ranging from -0.96% to 0.23%. Biaxial strain was introduced by firmly gluing samples to various substrate materials with different thermal expansion. With increasing $\varepsilon$, structural and superconducting transition temperatures monotonically increased and decreased, re… ▽ More We performed systematic transport measurements on FeSe single crystals with applying in-plane biaxial strain $\varepsilon$ ranging from -0.96% to 0.23%. Biaxial strain was introduced by firmly gluing samples to various substrate materials with different thermal expansion. With increasing $\varepsilon$, structural and superconducting transition temperatures monotonically increased and decreased, respectively. We analyzed magneto-transport results using a compensated three-carrier model. The evaluated densities of hole and electron carriers systematically changed with strain. This indicates that we succeeded in controlling the band structure of single-crystalline FeSe. △ Less

Submitted 17 March, 2021; originally announced March 2021.

Comments: 9 pages, 12 figures

Journal ref: Phys. Rev. Materials 5, 044801 (2021)

Comprehensive study of out-of-plane transport properties in BaFe$_{2}$As$_{2}$: Three-dimensional electronic state and effect of chemical substitution

Authors: Masamichi Nakajima, Masahiko Nagafuchi, Setsuko Tajima

Abstract: We investigated the out-of-plane transport properties of parent and chemically substituted BaFe$_{2}$As$_{2}$ for various types of substitution. Based on the studies of Hall coefficient and chemical-substitution effect, we have clarified the origin for the unusual temperature dependence of out-of-plane resistivity $ρ_c(T)$ in the high-temperature paramagnetic-tetragonal phase. Electron (hole) carr… ▽ More We investigated the out-of-plane transport properties of parent and chemically substituted BaFe$_{2}$As$_{2}$ for various types of substitution. Based on the studies of Hall coefficient and chemical-substitution effect, we have clarified the origin for the unusual temperature dependence of out-of-plane resistivity $ρ_c(T)$ in the high-temperature paramagnetic-tetragonal phase. Electron (hole) carriers have an incoherent (coherent) character, which is responsible for non-metallic (metallic) $ρ_c(T)$. Although both of electron and hole contributions are almost comparable, a slightly larger contribution comes from electrons at high temperatures, while from holes at low temperatures, resulting in a maximum in $ρ_c(T)$. In the low-temperature antiferromagnetic-orthorhombic phase, the major effect of substitution is to increase the residual-resistivity component, as in the case for the in-plane transport. In particular, Co atoms substituted for Fe give rise to strong scattering with large $\mathit{ac}$ anisotropy. We found that K substitution induces a non-metallic behavior in $ρ_c(T)$ at low temperatures, which is likely due to a weakly localized nature along the $c$-axis direction. △ Less

Submitted 17 March, 2021; originally announced March 2021.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. B 97, 094511 (2018)

Origin of the Moon

Authors: Robin M. Canup, Kevin Righter, Nicolas Dauphas, Kaveh Pahlevan, Matija Ćuk, Simon J. Lock, Sarah T. Stewart, Julien Salmon, Raluca Rufu, Miki Nakajima, Tomáš Magna

Abstract: The Earth-Moon system is unusual in several respects. The Moon is roughly 1/4 the radius of the Earth - a larger satellite-to-planet size ratio than all known satellites other than Pluto's Charon. The Moon has a tiny core, perhaps with only ~1% of its mass, in contrast to Earth whose core contains nearly 30% of its mass. The Earth-Moon system has a high total angular momentum, implying a rapidly s… ▽ More The Earth-Moon system is unusual in several respects. The Moon is roughly 1/4 the radius of the Earth - a larger satellite-to-planet size ratio than all known satellites other than Pluto's Charon. The Moon has a tiny core, perhaps with only ~1% of its mass, in contrast to Earth whose core contains nearly 30% of its mass. The Earth-Moon system has a high total angular momentum, implying a rapidly spinning Earth when the Moon formed. In addition, the early Moon was hot and at least partially molten with a deep magma ocean. Identification of a model for lunar origin that can satisfactorily explain all of these features has been the focus of decades of research. △ Less

Submitted 2 March, 2021; originally announced March 2021.

Comments: Book chapter in "New Views on the Moon II"

Effect of the sample work function on alkali metal dosing induced electronic structure change

Authors: Saegyeol Jung, Yukiaki Ishida, Minsoo Kim, Masamichi Nakajima, Shigeyuki Ishida, Hiroshi Eisaki, Woojae Choi, Yong Seung Kwon, Jonathan Denlinger, Toshio Otsu, Yohei Kobayashi, Soonsang Huh, Changyoung Kim

Abstract: Alkali metal dosing (AMD) has been widely used as a way to control doping without chemical substitution. This technique, in combination with angle resolved photoemission spectroscopy (ARPES), often provides an opportunity to observe unexpected phenomena. However, the amount of transferred charge and the corresponding change in the electronic structure vary significantly depending on the material.… ▽ More Alkali metal dosing (AMD) has been widely used as a way to control doping without chemical substitution. This technique, in combination with angle resolved photoemission spectroscopy (ARPES), often provides an opportunity to observe unexpected phenomena. However, the amount of transferred charge and the corresponding change in the electronic structure vary significantly depending on the material. Here, we report study on the correlation between the sample work function and alkali metal induced electronic structure change for three iron-based superconductors: FeSe, Ba(Fe$_{0.94}$Co$_{0.06}$)$_{2}$As$_{2}$ and NaFeAs which share a similar Fermi surface topology. Electronic structure change upon monolayer of alkali metal dosing and the sample work function were measured by ARPES. Our results show that the degree of electronic structure change is proportional to the difference between the work function of the sample and Mulliken's absolute electronegativity of the dosed alkali metal. This finding provides a possible way to estimate the AMD induced electronic structure change. △ Less

Submitted 29 January, 2021; v1 submitted 27 January, 2021; originally announced January 2021.

Comments: 4 pages

Journal ref: Journal of Electron Spectroscopy and Related Phenomena Volume 249, 147045 (2021)

Accretion of Ornamental Equatorial Ridges on Pan, Atlas and Daphnis

Authors: Alice C. Quillen, Fatima Zaidouni, Miki Nakajima, Esteban Wright

Abstract: We explore scenarios for the accretion of ornamental ridges on Saturn's moons Pan, Atlas, and Daphnis from material in Saturn's rings. Accretion of complex shaped ridges from ring material should be possible when the torque from accreted material does not exceed the tidal torque from Saturn that ordinarily maintains tidal lock. This gives a limit on the maximum accretion rate and the minimum durat… ▽ More We explore scenarios for the accretion of ornamental ridges on Saturn's moons Pan, Atlas, and Daphnis from material in Saturn's rings. Accretion of complex shaped ridges from ring material should be possible when the torque from accreted material does not exceed the tidal torque from Saturn that ordinarily maintains tidal lock. This gives a limit on the maximum accretion rate and the minimum duration for equatorial ridge growth. We explore the longitude distribution of ridges accreted from ring material, initially in circular orbits, onto a moon that is on a circular, inclined or eccentric orbit. Sloped and lobed ridges can be accreted if the moon tidally realigns during accretion due to its change in shape or because the disk edge surface density profile allows ring material originating at different initial semi-major axes to impact the moon at different locations on its equatorial ridge. We find that accretion from an asymmetric gap might account for a depression on Atlas's equatorial ridge. Accretion from an asymmetric gap at orbital eccentricity similar to the Hill eccentricity, might allow accretion of multiple lobes, as seen on Pan. Two possibly connected scenarios are promising for growth of ornamental equatorial ridges. The moon migrates through the ring, narrowing its gap and facilitating accretion. The moon's orbital eccentricity could increase due to orbital resonance with another moon, pushing it into its gap edges and facilitating accretion. △ Less

Submitted 17 January, 2021; v1 submitted 26 July, 2020; originally announced July 2020.

Neural Schrödinger Equation:Physical Law as Neural Network

Authors: Mitsumasa Nakajima, Kenji Tanaka, Toshikazu Hashimoto

Abstract: We show a new family of neural networks based on the Schrödinger equation (SE-NET). In this analogy, the trainable weights of the neural networks correspond to the physical quantities of the Schrödinger equation. These physical quantities can be trained using the complex-valued adjoint method. Since the propagation of the SE-NET can be described by the evolution of physical systems, its outputs ca… ▽ More We show a new family of neural networks based on the Schrödinger equation (SE-NET). In this analogy, the trainable weights of the neural networks correspond to the physical quantities of the Schrödinger equation. These physical quantities can be trained using the complex-valued adjoint method. Since the propagation of the SE-NET can be described by the evolution of physical systems, its outputs can be computed by using a physical solver. As a demonstration, we implemented the SE-NET using the finite difference method. The trained network is transferable to actual optical systems. Based on this concept, we show a numerical demonstration of end-to-end machine learning with an optical frontend. Our results extend the application field of machine learning to hybrid physical-digital optimizations. △ Less

Submitted 4 April, 2022; v1 submitted 24 June, 2020; originally announced June 2020.

Synthetic Image Augmentation for Damage Region Segmentation using Conditional GAN with Structure Edge

Authors: Takato Yasuno, Michihiro Nakajima, Tomoharu Sekiguchi, Kazuhiro Noda, Kiyoshi Aoyanagi, Sakura Kato

Abstract: Recently, social infrastructure is aging, and its predictive maintenance has become important issue. To monitor the state of infrastructures, bridge inspection is performed by human eye or bay drone. For diagnosis, primary damage region are recognized for repair targets. But, the degradation at worse level has rarely occurred, and the damage regions of interest are often narrow, so their ratio per… ▽ More Recently, social infrastructure is aging, and its predictive maintenance has become important issue. To monitor the state of infrastructures, bridge inspection is performed by human eye or bay drone. For diagnosis, primary damage region are recognized for repair targets. But, the degradation at worse level has rarely occurred, and the damage regions of interest are often narrow, so their ratio per image is extremely small pixel count, as experienced 0.6 to 1.5 percent. The both scarcity and imbalance property on the damage region of interest influences limited performance to detect damage. If additional data set of damaged images can be generated, it may enable to improve accuracy in damage region segmentation algorithm. We propose a synthetic augmentation procedure to generate damaged images using the image-to-image translation mapping from the tri-categorical label that consists the both semantic label and structure edge to the real damage image. We use the Sobel gradient operator to enhance structure edge. Actually, in case of bridge inspection, we apply the RC concrete structure with the number of 208 eye-inspection photos that rebar exposure have occurred, which are prepared 840 block images with size 224 by 224. We applied popular per-pixel segmentation algorithms such as the FCN-8s, SegNet, and DeepLabv3+Xception-v2. We demonstrates that re-training a data set added with synthetic augmentation procedure make higher accuracy based on indices the mean IoU, damage region of interest IoU, precision, recall, BF score when we predict test images. △ Less

Submitted 7 May, 2020; originally announced May 2020.

Comments: 4 pages, 3 figures. arXiv admin note: text overlap with arXiv:2004.10126

ACM Class: I.5.4; I.2.10; I.2.6

X-ray emission evolution of the Galactic ultra-luminous X-ray pulsar Swift J0243.6+6124 during the 2017-2018 outburst observed by the MAXI GSC

Authors: Mutsumi Sugizaki, Motoki Oeda, Nobuyuki Kawai, Tatehiro Mihara, Kazuo Makishima, Motoki Nakajima

Abstract: This paper reports on the X-ray emission evolution of the ultra-luminous Galactic X-ray pulsar, Swift J0243.6+6124, during the 2017-2018 giant outburst observed by the MAXI GSC. The 2-30 keV light curve and the energy spectra confirm that the luminosity $L_\mathrm{X}$ reached $2.5\times 10^{39}$ erg s$^{-1}$, 10 times higher than the Eddington limit. When the source was luminous with… ▽ More This paper reports on the X-ray emission evolution of the ultra-luminous Galactic X-ray pulsar, Swift J0243.6+6124, during the 2017-2018 giant outburst observed by the MAXI GSC. The 2-30 keV light curve and the energy spectra confirm that the luminosity $L_\mathrm{X}$ reached $2.5\times 10^{39}$ erg s$^{-1}$, 10 times higher than the Eddington limit. When the source was luminous with $L_\mathrm{X}\gtrsim 0.9\times 10^{38}$ erg s$^{-1}$, it exhibited a negative correlation on a hardness-intensity diagram. However, two hardness ratios, a soft color ($=$ 4-10 keV / 2-4 keV) and a hard color ($=$ 10-20 keV / 4-10 keV), showed somewhat different behavior across a characteristic luminosity of $L_\mathrm{c}\simeq 5\times 10^{38}$ erg s$^{-1}$. The soft color changed more than the hard color when $L_\mathrm{X} < L_\mathrm{c}$, whereas the opposite was observed above $L_\mathrm{c}$. The spectral change above $L_\mathrm{c}$ was represented by a broad enhanced feature at $\sim 6$ keV. The pulse profiles made a transition from a single-peak to a double-peak one as the source brightened across $L_\mathrm{c}$. These spectral and pulse-shape properties can be interpreted by a scenario that the accretion columns on the neutron star surface, producing the Comptonized X-ray emission, gradually became taller as $L_\mathrm{X}$ increased. The broad 6 keV enhancement could be a result of cyclotron-resonance absorption at $\sim 10$ keV, corresponding to a surface magnetic field $B_\mathrm{s}\simeq 1.1\times 10^{12}$ G. The spin-frequency derivatives calculated with the Fermi GBM data showed a smooth correlation with $L_\mathrm{X}$ up to the outburst peak, and its linear coefficient is comparable to those of X-ray binary pulsars whose $B_\mathrm{s}$ are $(1-8)\times 10^{12}$ G. These results suggest that $B_\mathrm{s}$ of Swift J0243.6$+$6124 is a few times $10^{12}$ G. △ Less

Submitted 16 May, 2020; originally announced May 2020.

Comments: 19 pages, 13 figures, accepted for publication in ApJ

Novel method of developing broad band AC biasing power amplifier for online turbulent feedback experiment in STOR-M tokamak

Authors: Debjyoti Basua, Masaru Nakajimaa, A. V. Melnikov, David McColl, Chijin Xiao, Akira Hirose

Abstract: A pulsed oscillating power amplifier has been developed for high frequency biasing\cite{kn:deb1} and real time turbulent feedback experiment in STOR-M tokamak. It is capable to provide output peak to peak oscillating voltage of around $\pm60$V and current around 30A within frequency band 1kHz-50kHz without any distortion of any waveform signal. Overall output power is amplified by two stages power… ▽ More A pulsed oscillating power amplifier has been developed for high frequency biasing\cite{kn:deb1} and real time turbulent feedback experiment in STOR-M tokamak. It is capable to provide output peak to peak oscillating voltage of around $\pm60$V and current around 30A within frequency band 1kHz-50kHz without any distortion of any waveform signal. Overall output power is amplified by two stages power mosfet op-amp as well as nine identical push-pull amplifiers which are parallel connected in final stages. The power amplifier input signal, collected from plasma floating potential during plasma shot, is optically isolated with tokamak vessel for real time feedback experiment. Here, filtered floating potential fluctuations having band width between 5kHz-40kHz has been amplified and fed to an electrode inserted into the plasma edge to study response of plasma turbulence. It is observed that magnetic fluctuations are suppressed due to real time feedback of floating potential. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Comments: No