-
Reactive Laser Synthesis of Ultra-high-temperature Ceramics HfC, ZrC, TiC, HfN, ZrN, and TiN for Additive Manufacturing
Authors:
Adam B. Peters,
Chuhong Wang,
Dajie Zhang,
Alberto Hernandez,
Dennis C. Nagle,
Tim Mueller,
James B. Spicer
Abstract:
Ultra-high-temperature ceramics (UHTCs) are optimal structural materials for applications that require extreme temperature resilience, resistance to chemically aggressive environments, wear, and mechanical stress. Processing UHTCs with laser-based additive manufacturing (AM) has not been fully realized due to a variety of obstacles. In this work, selective laser reaction sintering (SLRS) technique…
▽ More
Ultra-high-temperature ceramics (UHTCs) are optimal structural materials for applications that require extreme temperature resilience, resistance to chemically aggressive environments, wear, and mechanical stress. Processing UHTCs with laser-based additive manufacturing (AM) has not been fully realized due to a variety of obstacles. In this work, selective laser reaction sintering (SLRS) techniques were investigated for the production of near net-shape UHTC ceramics such as HfC, ZrC, TiC, HfN, ZrN, and TiN. Group IV transition metal and metal oxide precursor materials were chemically converted and reaction-bonded into layers of UHTCs using single-step selective laser processing in CH4 or NH3 gas that might be compatible with prevailing powder bed fusion techniques. Conversion of either metals (Hf, Zr and Ti) or metal oxides (HfO2, ZrO2, and TiO2) particles was first investigated to examine reaction mechanisms and volume changes associated with SLRS of single-component precursor systems. SLRS processing of metal or metal oxide alone produced near stoichiometric UHTC phases with yields up to 100 wt% total for carbides and nitrides. However, for single component precursors, gas-solid reactivity induced volumetric changes resulted in residual stresses and cracking in the product layer. To mitigate conversion-induced stresses, composite metal/metal oxide precursors were employed to compensate for the volume changes of either the metal (which expands during conversion) or the metal oxide precursor (which contracts).
△ Less
Submitted 6 December, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Selective Laser Reaction Synthesis of SiC, Si$_3$N$_4$ and HfC/SiC Composites for Additive Manufacturing
Authors:
Adam B. Peters,
Dajie Zhang,
Alberto Hernandez,
Chuhong Wang,
Dennis C. Nagle,
Tim Mueller,
James B. Spicer
Abstract:
Selective laser reaction sintering techniques (SLRS) techniques were investigated for the production of near net-shape non-oxide ceramics including SiC, Si$_3$N$_4$, and HfC/SiC composites that might be compatible with prevailing powder bed fusion additive manufacturing processes. Reaction bonded layers of covalent ceramics were produced using in-situ reactions that occur during selective laser pr…
▽ More
Selective laser reaction sintering techniques (SLRS) techniques were investigated for the production of near net-shape non-oxide ceramics including SiC, Si$_3$N$_4$, and HfC/SiC composites that might be compatible with prevailing powder bed fusion additive manufacturing processes. Reaction bonded layers of covalent ceramics were produced using in-situ reactions that occur during selective laser processing and layer formation. During SLRS, precursor materials composed of metal and/or metal oxide powders were fashioned into powder beds for conversion to non-oxide ceramic layers. Laser-processing was used to initiate simultaneous chemical conversion and local interparticle bonding of precursor particles in CH4 or NH3 gases. Several factors related to the reaction synthesis process (precursor chemistry, gas-solid and gas-liquid synthesis mechanisms, precursor vapor pressures) were investigated in relation to resulting microstructures and non-oxide yields. Results indicated that the volumetric changes which occurred during in-situ conversion of single component precursors negatively impacted the surface layer microstructure. To circumvent the internal stresses and cracking that accompanied the conversion of Si or Hf (that expands upon conversion) or SiO$_x$ (that contracts during conversion), optimized ratios of the precursor constituents were used to produce near isovolumetric conversion to the product phase. The results demonstrate that under appropriate processing conditions and precursor selection, the formation of near net-shape SiC and SiC composites might be achieved through single-step AM-compatible techniques.
△ Less
Submitted 29 July, 2022;
originally announced August 2022.
-
Reactive Two-Step Additive Manufacturing of Ultra-high Temperature Carbide Ceramics
Authors:
Adam B. Peters,
Dajie Zhang,
Dennis C. Nagle,
James B. Spicer
Abstract:
Ultra-high-temperature ceramics (UHTCs) are candidate structural materials for applications that require resiliency to extreme temperature (>2000°C), high mechanical loads, or aggressive oxidizing environments. Processing UHTC transition metal carbides as standalone materials using additive manufacturing (AM) methods has not been fully realized due to their extremely slow atomic diffusivities that…
▽ More
Ultra-high-temperature ceramics (UHTCs) are candidate structural materials for applications that require resiliency to extreme temperature (>2000°C), high mechanical loads, or aggressive oxidizing environments. Processing UHTC transition metal carbides as standalone materials using additive manufacturing (AM) methods has not been fully realized due to their extremely slow atomic diffusivities that impede sintering and large volume changes during indirect AM that can induce defect structures. In this work, a two-step, reactive AM approach was studied for the formation of the ultra-high temperature ceramic TiCx. Readily available equipment including a polymer powder bed fusion AM machine and a traditional tube furnace were used to produce UHTC cubes and lattice structures with sub-millimeter resolution. This processing scheme incorporated, (1) selective laser sintering of a Ti precursor mixed with a phenolic binder for green body shaping, and (2) ex-situ, isothermal gas-solid conversion of the green body in CH4 to form TiCx structures. Reactive post-processing in CH4 resulted in up to 98.2 wt% TiC0.90 product yield and a reduction in net-shrinkage during consolidation due to the volume expansion associated with the conversion of Ti to TiC. Results indicated that reaction bonding associated with the Gibbs free energy release associated with TiC formation produced interparticle adhesion at low furnace processing temperatures. The ability to bond highly refractory materials through this type of process resulted in structures that were crack-free and resisted fracture during thermal shock testing. Broadly, the additive manufacturing approach presented could be useful for the production of many UHTC carbides that might otherwise be incompatible with prevailing AM techniques that do not include reaction synthesis.
△ Less
Submitted 6 December, 2022; v1 submitted 29 July, 2022;
originally announced August 2022.
-
On the Effectiveness of Virtual Reality-based Training for Robotic Setup
Authors:
Arian Mehrfard,
Javad Fotouhi,
Tess Forster,
Giacomo Taylor,
Danyal Fer,
Deborah Nagle,
Nassir Navab,
Bernhard Fuerst
Abstract:
Virtual Reality (VR) is rapidly increasing in popularity as a teaching tool. It allows for the creation of a highly immersive, three-dimensional virtual environment intended to simulate real-life environments. With more robots saturating the industry - from manufacturing to healthcare, there is a need to train end-users on how to set up, operate, tear down, and troubleshoot the robot. Even though…
▽ More
Virtual Reality (VR) is rapidly increasing in popularity as a teaching tool. It allows for the creation of a highly immersive, three-dimensional virtual environment intended to simulate real-life environments. With more robots saturating the industry - from manufacturing to healthcare, there is a need to train end-users on how to set up, operate, tear down, and troubleshoot the robot. Even though VR has become widely used in training surgeons on the psychomotor skills associated with operating the robot, little research has been done to see how the benefits of VR could translate to teaching the bedside staff, tasked with supporting the robot during the full end-to-end surgical procedure. We trained 30 participants on how to set up a robotic arm in an environment mimicking clinical setup. We divided these participants equally into 3 groups with one group trained with paper-based instructions, one with video-based instructions and one with VR-based instructions. We then compared and contrasted these three different training methods. VR and paper-based were highly favored training mediums over video-based. VR-trained participants achieved slightly higher fidelity of individual robotic joint angles, suggesting better comprehension of the spatial awareness skills necessary to achieve desired arm positioning. In addition, VR resulted in higher reproducibility of setup fidelity and more consistency in user confidence levels as compared to paper and video-based training.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Locally-Oriented Programming: A Simple Programming Model for Stencil-Based Computations on Multi-Level Distributed Memory Architectures
Authors:
Craig Rasmussen,
Matthew Sottile,
Daniel Nagle,
Soren Rasmussen
Abstract:
Emerging hybrid accelerator architectures for high performance computing are often suited for the use of a data-parallel programming model. Unfortunately, programmers of these architectures face a steep learning curve that frequently requires learning a new language (e.g., OpenCL). Furthermore, the distributed (and frequently multi-level) nature of the memory organization of clusters of these mach…
▽ More
Emerging hybrid accelerator architectures for high performance computing are often suited for the use of a data-parallel programming model. Unfortunately, programmers of these architectures face a steep learning curve that frequently requires learning a new language (e.g., OpenCL). Furthermore, the distributed (and frequently multi-level) nature of the memory organization of clusters of these machines provides an additional level of complexity. This paper presents preliminary work examining how programming with a local orientation can be employed to provide simpler access to accelerator architectures. A locally-oriented programming model is especially useful for the solution of algorithms requiring the application of a stencil or convolution kernel. In this programming model, a programmer codes the algorithm by modifying only a single array element (called the local element), but has read-only access to a small sub-array surrounding the local element. We demonstrate how a locally-oriented programming model can be adopted as a language extension using source-to-source program transformations.
△ Less
Submitted 11 February, 2015;
originally announced February 2015.
