-
Europa's Surface Water-ice Crystallinity and Correlations between Lineae and Hydrate Composition
Authors:
Jodi R. Berdis,
James R. Murphy,
Nancy J. Chanover
Abstract:
Europa's surface composition and evidence for cryovolcanic activity can provide insight into the properties and composition of the subsurface ocean, allowing the evaluation of its potential habitability. One promising avenue for revealing the surface processing and subsurface activity are the relative fractions of crystalline and amorphous water-ice observed on the surface, which are influenced by…
▽ More
Europa's surface composition and evidence for cryovolcanic activity can provide insight into the properties and composition of the subsurface ocean, allowing the evaluation of its potential habitability. One promising avenue for revealing the surface processing and subsurface activity are the relative fractions of crystalline and amorphous water-ice observed on the surface, which are influenced by temperature, charged particle bombardment, vapor deposition, and cryovolcanic activity. The crystallinity observed on Europa's leading hemisphere cannot be reproduced by thermophysical and particle flux modeling alone, indicating that there may be additional processes influencing the surface. We performed a spectral mixture analysis on hyperspectral image cubes from the Galileo Near-Infrared Mapping Spectrometer (NIMS) to identify how surface crystallinity is influenced by physical processing at a high spatial resolution scale. We focus specifically on two image cubes, 15e015 closer to the equator and 17e009 closer to the south pole, both on the leading hemisphere. We performed a nonnegative least-squares spectral mixture analysis to reveal both the non-ice composition and the water-ice crystallinity of the surface. We found that amorphous water-ice dominates the spectrum at the equator and the south pole. We estimated a mean crystallinity of ~35% within the 15e015 NIMS cube and a mean crystallinity of ~15% within the 17e009 NIMS cube, which is consistent with ground-based spectroscopically derived crystallinities. We also identified a correlation of magnesium sulfate, magnesium chloride, and hydrated sulfuric acid with lineae and ridges, which may provide evidence for surface processing by upwelling subsurface material.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Obliquity dependence of the formation of the martian polar layered deposits
Authors:
Jeremy A. Emmett,
James R. Murphy,
Melinda A. Kahre
Abstract:
Mars' polar layered deposits (PLD) are comprised of layers of varying dust-to-water ice volume mixing ratios (VMR) that may record astronomically-forced climatic variation over Mars' recent orbital history. Retracing the formation of these layers by quantifying the sensitivity of deposition rates of polar material to astronomical forcing is critical for the interpretation of this record. Using a M…
▽ More
Mars' polar layered deposits (PLD) are comprised of layers of varying dust-to-water ice volume mixing ratios (VMR) that may record astronomically-forced climatic variation over Mars' recent orbital history. Retracing the formation of these layers by quantifying the sensitivity of deposition rates of polar material to astronomical forcing is critical for the interpretation of this record. Using a Mars global climate model (GCM), we investigate the sensitivity of annual polar water ice and dust surface deposition to various obliquities and surface water ice distributions at zero eccentricity, providing a reasonable characterization of the evolution of the PLD during recent low-eccentricity epochs. For obliquities between 15° - 35°, predicted net annual accumulation rates range from -1 to +14 mm/yr for water ice and from +0.003 to +0.3 mm/yr for dust. GCM-derived rates are ingested into an integration model that simulates polar accumulation of water ice and dust over 5 consecutive obliquity cycles (~700 kyrs) during a low eccentricity epoch. A subset of integration simulations predict combined accumulation of water ice and dust in the north at time averaged rates that are near the observationally-inferred value of 0.5 mm/yr. Three types of layers are produced per obliquity cycle: a ~30 m-thick dust-rich (~25% dust VMR) layer forms at high obliquity, a ~0.5 m-thick dust lag forms at low obliquity, and two ~10 m-thick dust-poor (~3%) layers form when obliquity is increasing/decreasing. The ~30 m-thick dust-rich layer is reminiscent of a ~30 m feature derived from visible imagery analysis the north PLD, while the ~0.5 m-thick dust lag is a factor of ~2 smaller than observed "thin layers". Overall, this investigation provides further evidence for obliquity forcing in the PLD climate record, and demonstrates the importance of ice-on-dust nucleation in polar depositional processes.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Europa's surface water ice crystallinity: Discrepancy between observations and thermophysical and particle flux modeling
Authors:
Jodi R. Berdis,
Murthy S. Gudipati,
James R. Murphy,
Nancy J. Chanover
Abstract:
Physical processing of Europan surface water ice by thermal relaxation, charged particle bombardment, and possible cryovolcanic activity can alter the percentage of the crystalline form of water ice compared to that of the amorphous form of water ice (the ''crystallinity'') on Europa's surface. The timescales over which amorphous water ice is thermally transformed to crystalline water ice at Europ…
▽ More
Physical processing of Europan surface water ice by thermal relaxation, charged particle bombardment, and possible cryovolcanic activity can alter the percentage of the crystalline form of water ice compared to that of the amorphous form of water ice (the ''crystallinity'') on Europa's surface. The timescales over which amorphous water ice is thermally transformed to crystalline water ice at Europan surface temperatures suggests that the water ice there should be primarily in the crystalline form, however, surface bombardment by charged particles induced by Jupiter's magnetic field, and vapor deposition of water ice from Europan plumes, can produce amorphous water ice surface deposits on short timescales. The purpose of this investigation is to determine whether the Europan surface water ice crystallinity derived from ground-based spectroscopic measurements is in agreement with the crystallinity expected based on temperature and radiation modeling. Using a 1D thermophysical model of Europa's surface, we calculate a full-disk crystallinity of Europa's leading hemisphere by incorporating the thermal relaxation of amorphous to crystalline water ice and the degradation of crystalline to amorphous water ice by irradiation. Concurrently, we derive the full-disk crystallinity of Europa's leading hemisphere using a comparison of near-infrared ground-based spectral observations from Grundy et al. (1999), Busarev et al. (2018), and the Apache Point Observatory with laboratory spectra from Mastrapa et al. (2018) and the Ice Spectroscopy Lab at the Jet Propulsion Laboratory. We calculate a modeled crystallinity significantly higher than crystallinities derived from ground-based observations and laboratory spectra. This discrepancy may be a result of geophysical processes, such as by vapor-deposited plume material, or it may arise from assumptions and uncertainties in the crystallinity calculations.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Broadband Optical Detection using the Spin Seebeck Effect
Authors:
Subash Kattel,
Joseph R. Murphy,
David Ellsworth,
Jinjun Ding,
Tao Liu,
Peng Li,
Mingzhong Wu,
William D. Rice
Abstract:
The generation, control, and detection of spin currents in solid-state devices are critical for Joule-heating minimization, spin-based computation, and electrical energy generation from thermal gradients. Although incorporation of spin functionality into technologically important architectures is still in its infancy, advantages over all-electric devices are increasingly becoming clear. Here, we u…
▽ More
The generation, control, and detection of spin currents in solid-state devices are critical for Joule-heating minimization, spin-based computation, and electrical energy generation from thermal gradients. Although incorporation of spin functionality into technologically important architectures is still in its infancy, advantages over all-electric devices are increasingly becoming clear. Here, we utilize the spin Seebeck effect (SSE) in Pt/Y3Fe5O12 devices to detect light from 390 to 2200 nm. We find the device responsivity is remarkably flat across this technologically important wavelength range, closely following the Pt absorption coefficient. As expected from a SSE-generation mechanism, we observe that the photovoltage and Pt heating dynamics are in strong agreement. To precisely determine the optically created thermal gradient produced from a point-like heat source, we introduce a field-modulation method for measuring the SSE. Our results show broadband optical detection can be performed with devices based solely on spin current generation and detection.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Publicly Available Clinical BERT Embeddings
Authors:
Emily Alsentzer,
John R. Murphy,
Willie Boag,
Wei-Hung Weng,
Di Jin,
Tristan Naumann,
Matthew B. A. McDermott
Abstract:
Contextual word embedding models such as ELMo (Peters et al., 2018) and BERT (Devlin et al., 2018) have dramatically improved performance for many natural language processing (NLP) tasks in recent months. However, these models have been minimally explored on specialty corpora, such as clinical text; moreover, in the clinical domain, no publicly-available pre-trained BERT models yet exist. In this…
▽ More
Contextual word embedding models such as ELMo (Peters et al., 2018) and BERT (Devlin et al., 2018) have dramatically improved performance for many natural language processing (NLP) tasks in recent months. However, these models have been minimally explored on specialty corpora, such as clinical text; moreover, in the clinical domain, no publicly-available pre-trained BERT models yet exist. In this work, we address this need by exploring and releasing BERT models for clinical text: one for generic clinical text and another for discharge summaries specifically. We demonstrate that using a domain-specific model yields performance improvements on three common clinical NLP tasks as compared to nonspecific embeddings. These domain-specific models are not as performant on two clinical de-identification tasks, and argue that this is a natural consequence of the differences between de-identified source text and synthetically non de-identified task text.
△ Less
Submitted 20 June, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Time-resolved magnetophotoluminescence studies of magnetic polaron dynamics in type-II quantum dots
Authors:
B. Barman,
R. Oszwałdowski,
L. Schweidenback,
A. H. Russ,
J. M. Pientka,
Y. Tsai,
W-C. Chou,
W. C. Fan,
J. R. Murphy,
A. N. Cartwright,
I. R. Sellers,
A. G. Petukhov,
I. Žutić,
B. D. McCombe,
A. Petrou
Abstract:
We used continuous wave photoluminescence (cw-PL) and time resolved photoluminescence (TR-PL) spectroscopy to compare the properties of magnetic polarons (MP) in two related spatially indirect II-VI epitaxially grown quantum dot systems. In the ZnTe/(Zn,Mn)Se system the holes are confined in the non-magnetic ZnTe quantum dots (QDs), and the electrons reside in the magnetic (Zn,Mn)Se matrix. On the…
▽ More
We used continuous wave photoluminescence (cw-PL) and time resolved photoluminescence (TR-PL) spectroscopy to compare the properties of magnetic polarons (MP) in two related spatially indirect II-VI epitaxially grown quantum dot systems. In the ZnTe/(Zn,Mn)Se system the holes are confined in the non-magnetic ZnTe quantum dots (QDs), and the electrons reside in the magnetic (Zn,Mn)Se matrix. On the other hand, in the (Zn,Mn)Te/ZnSe system, the holes are confined in the magnetic (Zn,Mn)Te QDs, while the electrons remain in the surrounding non-magnetic ZnSe matrix. The magnetic polaron formation energies in both systems were measured from the temporal red-shift of the band-edge emission. The magnetic polaron exhibits distinct characteristics depending on the location of the Mn ions. In the ZnTe/(Zn,Mn)Se system the magnetic polaron shows conventional behavior with decreasing with increasing temperature T and increasing magnetic field B. In contrast, in the (Zn,Mn)Te/ZnSe system has unconventional dependence on temperature T and magnetic field B; is weakly dependent on T as well as on B. We discuss a possible origin for such a striking difference in the MP properties in two closely related QD systems.
△ Less
Submitted 14 October, 2015;
originally announced October 2015.
-
Absorption Efficiencies of Forsterite. I: DDA Explorations in Grain Shape and Size
Authors:
Sean S. Lindsay,
Diane H. Wooden,
David E. Harker,
Michael S. Kelley,
Charles E. Woodward,
Jim R. Murphy
Abstract:
We compute the absorption efficiency (Qabs) of forsterite using the discrete dipole approximation (DDA) in order to identify and describe what characteristics of crystal grain shape and size are important to the shape, peak location, and relative strength of spectral features in the 8-40 μm wavelength range. Using the DDSCAT code, we compute Qabs for non-spherical polyhedral grain shapes with a_ef…
▽ More
We compute the absorption efficiency (Qabs) of forsterite using the discrete dipole approximation (DDA) in order to identify and describe what characteristics of crystal grain shape and size are important to the shape, peak location, and relative strength of spectral features in the 8-40 μm wavelength range. Using the DDSCAT code, we compute Qabs for non-spherical polyhedral grain shapes with a_eff = 0.1 μm. The shape characteristics identified are: 1) elongation/reduction along one of three crystallographic axes; 2) asymmetry, such that all three crystallographic axes are of different lengths; and 3) the presence of crystalline faces that are not parallel to a specific crystallographic axis, e.g., non-rectangular prisms and (di)pyramids. Elongation/reduction dominates the locations and shapes of spectral features near 10, 11, 16, 23.5, 27, and 33.5 μm, while asymmetry and tips are secondary shape effects. Increasing grain sizes (0.1-1.0 μm) shifts the 10, 11 μm features systematically towards longer wavelengths and relative to the 11 μm feature increases the strengths and slightly broadens the longer wavelength features. Seven spectral shape classes are established for crystallographic a-, b-, and c-axes and include columnar and platelet shapes plus non-elongated or equant grain shapes. The spectral shape classes and the effects of grain size have practical application in identifying or excluding columnar, platelet or equant forsterite grain shapes in astrophysical environs. Identification of the shape characteristics of forsterite from 8-40 μm spectra provides a potential means to probe the temperatures at which forsterite formed.
△ Less
Submitted 4 February, 2013;
originally announced February 2013.
