Showing 201–250 of 1,011 results for author: Muller, S

On the analogy between the restricted primitive model and capacitor circuits. Part II: A generalized Gibbs-Duhem consistent extension of the Pitzer-Debye-Hückel term with corrections for low and variable relative permittivity

Authors: Andrés González de Castilla, Simon Müller, Irina Smirnova

Abstract: We present a novel, thermodynamically consistent modification of the Pitzer-Debye-Hückel term and its extension for concentration dependent density, molar mass and relative permittivity. This extension is validated for ionic liquids by comparison with a reference model from the literature and, in contrast to similar extensions, also applied to conventional salts with small spherical ions in aqueou… ▽ More We present a novel, thermodynamically consistent modification of the Pitzer-Debye-Hückel term and its extension for concentration dependent density, molar mass and relative permittivity. This extension is validated for ionic liquids by comparison with a reference model from the literature and, in contrast to similar extensions, also applied to conventional salts with small spherical ions in aqueous, mixed and non-aqueous solvents. The central novelty is the inclusion of a modified parameter of closest approach, which improves the overall qualitative performance of the Pitzer-Debye-Hückel term over the complete relative permittivity range. Gibbs-Duhem consistency is retained in the modified extension and sample calculations for aqueous [BMIM][BF4] and aqueous NaCl are provided. The novel, modified and extended term with concentration dependent properties is combined with the predictive COSMO-RS-ES model for the calculation of phase equilibria and activity coefficients in electrolytes with conventional salts. The performance of the COSMO-RS-ES model for predictions of salt solubility in fully non-aqueous media improves significantly upon introduction of concentration dependent properties within the long-range electrostatics. Modelling performance with the modified extended Pitzer-Debye-Hückel term outperforms modelling with the unmodified extension as well as with the conventional term with no extension. The correlated relative permittivity of the mixture is overestimated with respect to experimental values and kinetic depolarization effects provide a plausible explanation for this observation. Overall, our results support the consistent introduction of concentration dependent properties within the electrostatic theory in order to improve the modelling of electrolytes with particular emphasis on non-aqueous electrolytes. △ Less

Submitted 4 April, 2023; v1 submitted 30 March, 2023; originally announced March 2023.

Journal ref: J. Mol. Liq. 360, 119398 (2022)

On the analogy between the restricted primitive model and capacitor circuits: Semi-empirical alternatives for over- and underscreening in the calculation of mean ionic activity coefficients

Authors: Andrés González de Castilla, Simon Müller, Irina Smirnova

Abstract: The analogy between the restricted primitive model and capacitor circuits, originally described decades ago for the Mean Spherical Approximation, is explored to demonstrate its transferability in linearized electrolyte theories. On this basis, we offer an explanation of why treating the salt diameter as a free adjustable parameter blurs differences between electrolyte theories in the calculation o… ▽ More The analogy between the restricted primitive model and capacitor circuits, originally described decades ago for the Mean Spherical Approximation, is explored to demonstrate its transferability in linearized electrolyte theories. On this basis, we offer an explanation of why treating the salt diameter as a free adjustable parameter blurs differences between electrolyte theories in the calculation of mean ionic activity coefficients. Furthermore, a capacitor circuit analogy with an approximation of the Dressed Ion Theory is applied to develop a modified closest approach parameter "b" for the Pitzer-Debye-Hückel term. This modification is able to account for the qualitative effects of over- and underscreening in the calculation of mean ionic activity coefficients. This is achieved by defining "b" as a semi-empirical function that allows close resemblance with the multiple decay-length extension of the Debye-Hückel theory for high dielectric constant values and that lies close to recommended literature values of "b" for low dielectric constant values. Finally, as proof of principle, this modified semi-empirical Pitzer-Debye-Hückel term is implemented in the predictive COSMO-RS-ES model, an own reimplementation of the COSMO-RS theory developed for thermodynamic property calculations of electrolyte systems. It is shown that the modified semi-empirical Pitzer-Debye-Hückel term is an effective replacement for the recently published version of COSMO-RS-ES with explicit considerations for ion pairing. This reduces the modelling complexity by implicitly considering ion pairing and improves overall qualitative performance for the prediction of salt solubilities in mixed-solvent systems and even mean ionic activity coefficients in non-aqueous media. △ Less

Submitted 4 April, 2023; v1 submitted 30 March, 2023; originally announced March 2023.

Journal ref: Journal of Molecular Liquids 326, 115204 (2021)

Thermodynamic and Transport Properties Modeling of Deep Eutectic Solvents: A review on gE-models, equations of state and molecular dynamics

Authors: Andrés González de Castilla, Jan Philipp Bittner, Simon Müller, Sven Jakobtorweihen, Irina Smirnova

Abstract: Deep eutectic solvents (DESs) have gained attention in recent years as attractive alternatives to traditional solvents. There is a growing number of publications dealing with the thermodynamic modeling of DESs highlighting the importance of modeling the solutions' properties. In this review, we summarize the state-of-the-art in DES modeling as well as its current challenges. We also summarize the… ▽ More Deep eutectic solvents (DESs) have gained attention in recent years as attractive alternatives to traditional solvents. There is a growing number of publications dealing with the thermodynamic modeling of DESs highlighting the importance of modeling the solutions' properties. In this review, we summarize the state-of-the-art in DES modeling as well as its current challenges. We also summarize the various modeling approaches to phase equilibria and properties of DESs with gE-models, EOS and molecular dynamics (MD) simulations. The current gE-model and EOS-based approaches handle DESs as pseudo-components in order to simplify the parameterizations and calculation strategies. However, for the models to become more transferable and predictive, it would be preferable to model the individual DES constituents instead of using the pseudo-components. This implies that validation with more detailed experimental data that includes the distribution of the DES components is also required. MD simulations, in contrast to gE-models and EOS, are capable of providing information about the liquid structure and can predict dynamic properties although, the latter quantities still show some imprecisions. Therefore, insights into the liquid structure of DES systems from MD could also aid in improving present modeling strategies in addition to a better understanding. Finally, the latest developments for DES force fields are discussed as the quality of the applied force fields determine the results of MD simulations. △ Less

Submitted 30 March, 2023; originally announced March 2023.

Journal ref: J. Chem. Eng. Data 2020, 65, 3, 943-967

Calculation of Thermodynamic Equilibria with the Predictive Electrolyte Model COSMO-RS-ES: Improvements for Low Permittivity Systems

Authors: Simon Müller, Andrés González de Castilla, Christoph Taeschler, Andreas Klein, Irina Smirnova

Abstract: The predictive electrolyte model COSMO-RS-ES is refined to improve the description of systems at 25°C in which strong ion pairing is expected due to a low static permittivity of the liquid phase. Furthermore, the short-range ion energy interaction equations have been modified to better describe the misfit and energy interaction terms between ions and solvent molecules. In addition, the salt solubi… ▽ More The predictive electrolyte model COSMO-RS-ES is refined to improve the description of systems at 25°C in which strong ion pairing is expected due to a low static permittivity of the liquid phase. Furthermore, the short-range ion energy interaction equations have been modified to better describe the misfit and energy interaction terms between ions and solvent molecules. In addition, the salt solubility database is extended with additional non-aqueous systems containing solvents that have a low (ε_s<15) dielectric constant and promote near to full ion association. Throughout this work it is demonstrated that liquid-liquid equilibrium calculations and solid-liquid equilibrium predictions for electrolyte systems can be markedly improved with the inclusion of Bjerrum treatment based phenomenological considerations while introducing only one general additional parameter. Our modified approach reinforces the capabilities of COSMO-RS ES as a powerful predictive tool for the calculation of phase equilibria in systems with scarce experimental data. △ Less

Submitted 4 April, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Journal ref: Fluid Phase Equilib. 506, 112368 (2020)

Evaluation and Refinement of the novel predictive electrolyte model COSMO-RS-ES based on solid-liquid equilibria of salts and Gibbs free Energies of Transfer of Ions

Authors: Simon Müller, Christoph Taeschler, Andreas Klein, Irina Smirnova

Abstract: The new predictive electrolyte model COSMO-RS-ES is evaluated and refined for the calculation of solubilities of salts in mixed solvent systems. It is demonstrated that the model is capable of predicting solid-liquid equilibria at 25 °C for ammonium and alkali metal salts quite accurately in a wide variety of solvent mixtures. Furthermore, through the introduction of Gibbs free energies of transfe… ▽ More The new predictive electrolyte model COSMO-RS-ES is evaluated and refined for the calculation of solubilities of salts in mixed solvent systems. It is demonstrated that the model is capable of predicting solid-liquid equilibria at 25 °C for ammonium and alkali metal salts quite accurately in a wide variety of solvent mixtures. Furthermore, through the introduction of Gibbs free energies of transfer of single ions it is shown that the model performance can be improved even further. This new data type also allows for an ion-specific way of evaluating the model for the first time. For some systems when calculating the solubility, larger deviations are observed, but for the vast majority of systems the model delivers good predictions. This shows that COSMO-RS-ES is a valuable tool for calculation of phase equilibria in electrolyte systems especially when the scarcity of data impede the application of models that require a higher number of parameters. △ Less

Submitted 4 April, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Journal ref: Fluid Phase Equilib. 483, 165-174 (2019)

Reconstructing the shock history in the CMZ of NGC 253 with ALCHEMI

Authors: K. -Y. Huang, S. Viti, J. Holdship, J. G. Mangum, S. Martín, N. Harada, S. Muller, K. Sakamoto, K. Tanaka, Y. Yoshimura, R. Herrero-Illana, D. S. Meier, E. Behrens, P. P. van der Werf, C. Henkel, S. García-Burillo, V. M. Rivilla, K. L. Emig, L. Colzi, P. K. Humire, R. Aladro, M. Bouvier

Abstract: HNCO and SiO are well known shock tracers and have been observed in nearby galaxies, including the nearby (D=3.5 Mpc) starburst galaxy NGC 253. The simultaneous detection of these two species in regions where the star formation rate is high may be used to study the shock history of the gas. We perform a multi-line molecular study using these two shock tracers (SiO and HNCO) with the aim of charact… ▽ More HNCO and SiO are well known shock tracers and have been observed in nearby galaxies, including the nearby (D=3.5 Mpc) starburst galaxy NGC 253. The simultaneous detection of these two species in regions where the star formation rate is high may be used to study the shock history of the gas. We perform a multi-line molecular study using these two shock tracers (SiO and HNCO) with the aim of characterizing the gas properties. We also explore the possibility of reconstructing the shock history in NGC 253's Central Molecular Zone (CMZ). Six SiO transitions and eleven HNCO transitions were imaged at high resolution $1''.6$ (28 pc) with the Atacama Large Millimeter/submillimeter Array (ALMA) as part of the ALCHEMI Large Programme. Both non-LTE radiative transfer analysis and chemical modelling were performed in order to characterize the gas properties, and to investigate the chemical origin of the emission. The non-LTE radiative transfer analysis coupled with Bayesian inference shows clear evidence that the gas traced by SiO has different densities and temperatures than that traced by HNCO, with an indication that shocks are needed to produce both species. Chemical modelling further confirms such a scenario and suggests that fast and slow shocks are responsible for SiO and HNCO production, respectively, in most GMCs. We are also able to infer the physical characteristics of the shocks traced by SiO and HNCO for each GMC. Radiative transfer and chemical analysis of the SiO and HNCO in the CMZ of NGC 253 reveal a complex picture whereby most of the GMCs are subjected to shocks. We speculate on the possible shock scenarios responsible for the observed emission and provide potential history and timescales for each shock scenario. Higher spatial resolution observations of these two species are required in order to quantitatively differentiate between scenarios. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Journal ref: A&A 675, A151 (2023)

Kartezio: Evolutionary Design of Explainable Pipelines for Biomedical Image Analysis

Authors: Kévin Cortacero, Brienne McKenzie, Sabina Müller, Roxana Khazen, Fanny Lafouresse, Gaëlle Corsaut, Nathalie Van Acker, François-Xavier Frenois, Laurence Lamant, Nicolas Meyer, Béatrice Vergier, Dennis G. Wilson, Hervé Luga, Oskar Staufer, Michael L. Dustin, Salvatore Valitutti, Sylvain Cussat-Blanc

Abstract: An unresolved issue in contemporary biomedicine is the overwhelming number and diversity of complex images that require annotation, analysis and interpretation. Recent advances in Deep Learning have revolutionized the field of computer vision, creating algorithms that compete with human experts in image segmentation tasks. Crucially however, these frameworks require large human-annotated datasets… ▽ More An unresolved issue in contemporary biomedicine is the overwhelming number and diversity of complex images that require annotation, analysis and interpretation. Recent advances in Deep Learning have revolutionized the field of computer vision, creating algorithms that compete with human experts in image segmentation tasks. Crucially however, these frameworks require large human-annotated datasets for training and the resulting models are difficult to interpret. In this study, we introduce Kartezio, a modular Cartesian Genetic Programming based computational strategy that generates transparent and easily interpretable image processing pipelines by iteratively assembling and parameterizing computer vision functions. The pipelines thus generated exhibit comparable precision to state-of-the-art Deep Learning approaches on instance segmentation tasks, while requiring drastically smaller training datasets, a feature which confers tremendous flexibility, speed, and functionality to this approach. We also deployed Kartezio to solve semantic and instance segmentation problems in four real-world Use Cases, and showcase its utility in imaging contexts ranging from high-resolution microscopy to clinical pathology. By successfully implementing Kartezio on a portfolio of images ranging from subcellular structures to tumoral tissue, we demonstrated the flexibility, robustness and practical utility of this fully explicable evolutionary designer for semantic and instance segmentation. △ Less

Submitted 22 September, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

Comments: 36 pages, 6 main Figures. The Extended Data Movie is available at the following link: https://www.youtube.com/watch?v=r74gdzb6hdA. The source code is available on Github: https://github.com/KevinCortacero/Kartezio

Deformable registration with intensity correction for CESM monitoring response to Neoadjuvant Chemotherapy

Authors: Clément Jailin, Pablo Milioni De Carvalho, Sara Mohamed, Laurence Vancamberg, Amr Farouk Ibrahim Moustafa, Mohammed Gomaa, Rasha Mohammed Kamal, Serge Muller

Abstract: This paper proposes a robust longitudinal registration method for Contrast Enhanced Spectral Mammography in monitoring neoadjuvant chemotherapy. Because breast texture intensity changes with the treatment, a non-rigid registration procedure with local intensity compensations is developed. The approach allows registering the low energy images of the exams acquired before and after the chemotherapy.… ▽ More This paper proposes a robust longitudinal registration method for Contrast Enhanced Spectral Mammography in monitoring neoadjuvant chemotherapy. Because breast texture intensity changes with the treatment, a non-rigid registration procedure with local intensity compensations is developed. The approach allows registering the low energy images of the exams acquired before and after the chemotherapy. The measured motion is then applied to the corresponding recombined images. The difference of registered images, called residual, makes vanishing the breast texture that did not changed between the two exams. Consequently, this registered residual allows identifying local density and iodine changes, especially in the lesion area. The method is validated with a synthetic NAC case where ground truths are available. Then the procedure is applied to 51 patients with 208 CESM image pairs acquired before and after the chemotherapy treatment. The proposed registration converged in all 208 cases. The intensity-compensated registration approach is evaluated with different mathematical metrics and through the repositioning of clinical landmarks (RMSE: 5.9 mm) and outperforms state-of-the-art registration techniques. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Journal ref: Biomedical Physics & Engineering Express (2023)

Model adaptation for hyperbolic balance laws

Authors: Jan Giesselmann, Hrishikesh Joshi, Siegfried Müller, Aleksey Sikstel

Abstract: In this work, we devise a model adaptation strategy for a class of model hierarchies consisting of two levels of model complexity. In particular, the fine model consists of a system of hyperbolic balance laws with stiff reaction terms and the coarse model consists of a system of hyperbolic conservation laws. We employ the relative entropy stability framework to obtain an a posteriori modeling erro… ▽ More In this work, we devise a model adaptation strategy for a class of model hierarchies consisting of two levels of model complexity. In particular, the fine model consists of a system of hyperbolic balance laws with stiff reaction terms and the coarse model consists of a system of hyperbolic conservation laws. We employ the relative entropy stability framework to obtain an a posteriori modeling error estimator. The efficiency of the model adaptation strategy is demonstrated by conducting simulations for chemically reacting fluid mixtures in one space dimension. △ Less

Submitted 21 February, 2023; originally announced February 2023.

The MeerKAT Absorption Line Survey: Homogeneous continuum catalogues towards a measurement of the cosmic radio dipole

Authors: J. D. Wagenveld, H. -R. Klöckner, N. Gupta, P. P. Deka, P. Jagannathan, S. Sekhar, S. A. Balashev, E. Boettcher, F. Combes, K. L. Emig, M. Hilton, G. I. G. Józsa, P. Kamphuis, D. Y. Klutse, K. Knowles, J. -K. Krogager, A. Mohapatra, E. Momjian, K. Moodley, S. Muller, P. Petitjean, P. Salas, S. Sikhosana, R. Srianand

Abstract: The number counts of homogeneous samples of radio sources are a tried and true method of probing the large scale structure of the Universe, as most radio sources outside the galactic plane are at cosmological distances. As such they are expected to trace the cosmic radio dipole, an anisotropy analogous to the dipole seen in the cosmic microwave background (CMB). Results have shown that although th… ▽ More The number counts of homogeneous samples of radio sources are a tried and true method of probing the large scale structure of the Universe, as most radio sources outside the galactic plane are at cosmological distances. As such they are expected to trace the cosmic radio dipole, an anisotropy analogous to the dipole seen in the cosmic microwave background (CMB). Results have shown that although the cosmic radio dipole matches the direction of the CMB dipole, it has a significantly larger amplitude. This result challenges our assumption of the Universe being isotropic, which can have large repercussions for the current cosmological paradigm. Though significant measurements have been made, sensitivity to the radio dipole is generally hampered by systematic effects that can cause large biases in the measurement. Here we assess these systematics with data from the MeerKAT Absorption Line Survey (MALS). We present the analysis of ten MALS pointings, focusing on systematic effects that could lead to an inhomogeneous catalogue. We describe the calibration and creation of full band continuum images and catalogues, producing a combined catalogue containing 16,313 sources and covering 37.5 square degrees of sky down to a sensitivity of 10 $μ$Jy/beam. We measure the completeness, purity, and flux recovery statistics for these catalogues using simulated data. We investigate different source populations in the catalogues by looking at flux densities and spectral indices, and how they might influence source counts. Using the noise characteristics of the pointings, we find global measures that can be used to correct for the incompleteness of the catalogue, producing corrected number counts down to 100 - 200 $μ$Jy. We show that we can homogenise the catalogues and properly account for systematic effects. We determine that we can measure the dipole to $3σ$ significance with 100 MALS pointings. △ Less

Submitted 21 February, 2023; originally announced February 2023.

Comments: 30 pages, 25 figures. Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 673, A113 (2023)

Determinacy and Large Cardinals

Authors: Sandra Müller

Abstract: The study of inner models was initiated by Gödel's analysis of the constructible universe. Later, the study of canonical inner models with large cardinals, e.g., measurable cardinals, strong cardinals or Woodin cardinals, was pioneered by Jensen, Mitchell, Steel, and others. Around the same time, the study of infinite two-player games was driven forward by Martin's proof of analytic determinacy fr… ▽ More The study of inner models was initiated by Gödel's analysis of the constructible universe. Later, the study of canonical inner models with large cardinals, e.g., measurable cardinals, strong cardinals or Woodin cardinals, was pioneered by Jensen, Mitchell, Steel, and others. Around the same time, the study of infinite two-player games was driven forward by Martin's proof of analytic determinacy from a measurable cardinal, Borel determinacy from ZFC, and Martin and Steel's proof of levels of projective determinacy from Woodin cardinals with a measurable cardinal on top. First Woodin and later Neeman improved the result in the projective hierarchy by showing that in fact the existence of a countable iterable model, a mouse, with Woodin cardinals and a top measure suffices to prove determinacy in the projective hierarchy. This opened up the possibility for an optimal result stating the equivalence between local determinacy hypotheses and the existence of mice in the projective hierarchy. This article outlines the main concepts and results connecting determinacy hypotheses with the existence of mice with large cardinals as well as recent progress in the area. △ Less

Submitted 4 February, 2023; originally announced February 2023.

Stability of local tip pool sizes

Authors: Sebastian Müller, Isabel Amigo, Alexandre Reiffers-Masson, Santiago Ruano-Rincón

Abstract: In distributed ledger technologies (DLTs) with a directed acyclic graph (DAG) data structure, a block-issuing node can decide where to append new blocks and, consequently, how the DAG grows. This DAG data structure is typically decomposed into two pools of blocks, dependent on whether another block already references them. The unreferenced blocks are called the tips. Due to network delay, nodes ca… ▽ More In distributed ledger technologies (DLTs) with a directed acyclic graph (DAG) data structure, a block-issuing node can decide where to append new blocks and, consequently, how the DAG grows. This DAG data structure is typically decomposed into two pools of blocks, dependent on whether another block already references them. The unreferenced blocks are called the tips. Due to network delay, nodes can perceive the set of tips differently, giving rise to local tip pools. We present a new mathematical model to analyse the stability of the different local perceptions of the tip pools and allow heterogeneous and random network delay in the underlying peer-to-peer communication layer. Under natural assumptions, we prove that the number of tips is ergodic, converges to a stationary distribution, and provide quantitative bounds on the tip pool sizes. We conclude our study with agent-based simulations to illustrate the convergence of the tip pool sizes and the pool sizes' dependence on the communication delay and degree of centralization. △ Less

Submitted 3 February, 2023; originally announced February 2023.

Comments: 6 figures

MSC Class: 60K25; 68M14; 68M20

Vectorized Scenario Description and Motion Prediction for Scenario-Based Testing

Authors: Max Winkelmann, Constantin Vasconi, Steffen Müller

Abstract: Automated vehicles (AVs) are tested in diverse scenarios, typically specified by parameters such as velocities, distances, or curve radii. To describe scenarios uniformly independent of such parameters, this paper proposes a vectorized scenario description defined by the road geometry and vehicles' trajectories. Data of this form are generated for three scenarios, merged, and used to train the mot… ▽ More Automated vehicles (AVs) are tested in diverse scenarios, typically specified by parameters such as velocities, distances, or curve radii. To describe scenarios uniformly independent of such parameters, this paper proposes a vectorized scenario description defined by the road geometry and vehicles' trajectories. Data of this form are generated for three scenarios, merged, and used to train the motion prediction model VectorNet, allowing to predict an AV's trajectory for unseen scenarios. Predicting scenario evaluation metrics, VectorNet partially achieves lower errors than regression models that separately process the three scenarios' data. However, for comprehensive generalization, sufficient variance in the training data must be ensured. Thus, contrary to existing methods, our proposed method can merge diverse scenarios' data and exploit spatial and temporal nuances in the vectorized scenario description. As a result, data from specified test scenarios and real-world scenarios can be compared and combined for (predictive) analyses and scenario selection. △ Less

Submitted 25 August, 2023; v1 submitted 2 February, 2023; originally announced February 2023.

Comments: 6 pages, 7 figures, 3 tables

Journal ref: 2023 IEEE Intelligent Vehicles Symposium (IV), Jun. 2023, pp. 70-75

Epsilon-Identifiability of Causal Quantities

Authors: Ang Li, Scott Mueller, Judea Pearl

Abstract: Identifying the effects of causes and causes of effects is vital in virtually every scientific field. Often, however, the needed probabilities may not be fully identifiable from the data sources available. This paper shows how partial identifiability is still possible for several probabilities of causation. We term this epsilon-identifiability and demonstrate its usefulness in cases where the beha… ▽ More Identifying the effects of causes and causes of effects is vital in virtually every scientific field. Often, however, the needed probabilities may not be fully identifiable from the data sources available. This paper shows how partial identifiability is still possible for several probabilities of causation. We term this epsilon-identifiability and demonstrate its usefulness in cases where the behavior of certain subpopulations can be restricted to within some narrow bounds. In particular, we show how unidentifiable causal effects and counterfactual probabilities can be narrowly bounded when such allowances are made. Often those allowances are easily measured and reasonably assumed. Finally, epsilon-identifiability is applied to the unit selection problem. △ Less

Submitted 27 January, 2023; originally announced January 2023.

The Hazards and Benefits of Condescension in Social Learning

Authors: Itai Arieli, Yakov Babichenko, Stephan Müller, Farzad Pourbabaee, Omer Tamuz

Abstract: In a misspecified social learning setting, agents are condescending if they perceive their peers as having private information that is of lower quality than it is in reality. Applying this to a standard sequential model, we show that outcomes improve when agents are mildly condescending. In contrast, too much condescension leads to worse outcomes, as does anti-condescension. In a misspecified social learning setting, agents are condescending if they perceive their peers as having private information that is of lower quality than it is in reality. Applying this to a standard sequential model, we show that outcomes improve when agents are mildly condescending. In contrast, too much condescension leads to worse outcomes, as does anti-condescension. △ Less

Submitted 17 February, 2024; v1 submitted 26 January, 2023; originally announced January 2023.

Comments: 34 pages

Linear and quadratic Chabauty for affine hyperbolic curves

Authors: Marius Leonhardt, Martin Lüdtke, J. Steffen Müller

Abstract: We give sufficient conditions for finiteness of linear and quadratic refined Chabauty-Kim loci of affine hyperbolic curves. We achieve this by constructing depth $\leq 2$ quotients of the fundamental group, following a construction of Balakrishnan-Dogra in the projective case. We also apply Betts' machinery of weight filtrations to give unconditional explicit upper bounds on the number of S-integr… ▽ More We give sufficient conditions for finiteness of linear and quadratic refined Chabauty-Kim loci of affine hyperbolic curves. We achieve this by constructing depth $\leq 2$ quotients of the fundamental group, following a construction of Balakrishnan-Dogra in the projective case. We also apply Betts' machinery of weight filtrations to give unconditional explicit upper bounds on the number of S-integral points when our conditions are satisfied. △ Less

Submitted 27 July, 2023; v1 submitted 26 January, 2023; originally announced January 2023.

Comments: 20 pages; comments welcome

MSC Class: 14G05 (Primary) 11G30; 11D45 (Secondary)

Journal ref: Int. Math. Res. Not. IMRN 21 (2023), 18752-18780

Explaining Quantum Circuits with Shapley Values: Towards Explainable Quantum Machine Learning

Authors: Raoul Heese, Thore Gerlach, Sascha Mücke, Sabine Müller, Matthias Jakobs, Nico Piatkowski

Abstract: Methods of artificial intelligence (AI) and especially machine learning (ML) have been growing ever more complex, and at the same time have more and more impact on people's lives. This leads to explainable AI (XAI) manifesting itself as an important research field that helps humans to better comprehend ML systems. In parallel, quantum machine learning (QML) is emerging with the ongoing improvement… ▽ More Methods of artificial intelligence (AI) and especially machine learning (ML) have been growing ever more complex, and at the same time have more and more impact on people's lives. This leads to explainable AI (XAI) manifesting itself as an important research field that helps humans to better comprehend ML systems. In parallel, quantum machine learning (QML) is emerging with the ongoing improvement of quantum computing hardware combined with its increasing availability via cloud services. QML enables quantum-enhanced ML in which quantum mechanics is exploited to facilitate ML tasks, typically in the form of quantum-classical hybrid algorithms that combine quantum and classical resources. Quantum gates constitute the building blocks of gate-based quantum hardware and form circuits that can be used for quantum computations. For QML applications, quantum circuits are typically parameterized and their parameters are optimized classically such that a suitably defined objective function is minimized. Inspired by XAI, we raise the question of the explainability of such circuits by quantifying the importance of (groups of) gates for specific goals. To this end, we apply the well-established concept of Shapley values. The resulting attributions can be interpreted as explanations for why a specific circuit works well for a given task, improving the understanding of how to construct parameterized (or variational) quantum circuits, and fostering their human interpretability in general. An experimental evaluation on simulators and two superconducting quantum hardware devices demonstrates the benefits of the proposed framework for classification, generative modeling, transpilation, and optimization. Furthermore, our results shed some light on the role of specific gates in popular QML approaches. △ Less

Submitted 24 February, 2025; v1 submitted 22 January, 2023; originally announced January 2023.

Comments: 41 pages, 27 figures, 3 tables

Journal ref: Quantum Mach. Intell. 7, 27 (2025)

Phonon-mediated room-temperature quantum Hall transport in graphene

Authors: Daniel Vaquero, Vito Clericò, Michael Schmitz, Juan Antonio Delgado-Notario, Adrian Martín-Ramos, Juan Salvador-Sánchez, Claudius S. A. Müller, Km Rubi, Kenji Watanabe, Takashi Taniguchi, Bernd Beschoten, Christoph Stampfer, Enrique Diez, Mikhail I. Katsnelson, Uli Zeitler, Steffen Wiedmann, Sergio Pezzini

Abstract: The quantum Hall (QH) effect in two-dimensional electron systems (2DESs) is conventionally observed at liquid-helium temperatures, where lattice vibrations are strongly suppressed and bulk carrier scattering is dominated by disorder. However, due to large Landau level (LL) separation (~2000 K at B = 30 T), graphene can support the QH effect up to room temperature (RT), concomitant with a non-negli… ▽ More The quantum Hall (QH) effect in two-dimensional electron systems (2DESs) is conventionally observed at liquid-helium temperatures, where lattice vibrations are strongly suppressed and bulk carrier scattering is dominated by disorder. However, due to large Landau level (LL) separation (~2000 K at B = 30 T), graphene can support the QH effect up to room temperature (RT), concomitant with a non-negligible population of acoustic phonons with a wave-vector commensurate to the inverse electronic magnetic length. Here, we demonstrate that graphene encapsulated in hexagonal boron nitride (hBN) realizes a novel transport regime, where dissipation in the QH phase is governed predominantly by electron-phonon scattering. Investigating thermally-activated transport at filling factor 2 up to RT in an ensemble of back-gated devices, we show that the high B-field behaviour correlates with their zero B-field transport mobility. By this means, we extend the well-accepted notion of phonon-limited resistivity in ultra-clean graphene to a hitherto unexplored high-field realm. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: 17 pages, 4 figures. Supplementary information available at https://doi.org/10.1038/s41467-023-35986-3

Journal ref: Nature Communications 14, 318 (2023)

Discovery of Hydrogen Radio Recombination Lines at z=0.89 towards PKS 1830-211

Authors: Kimberly L. Emig, Neeraj Gupta, Pedro Salas, Sebastien Muller, Sergei A. Balashev, Francoise Combes, Emmanuel Momjian, Yiqing Song, Preshanth Jagannathan, Partha P. Deka, Gyula I. G. Jozsa, Hans-Rainer Klockner, Abhisek Mohapatra, Pasquier Noterdaeme, Patrick Petitjean, Raghunathan Srianand, Jonah D. Wagenveld

Abstract: We report the detection of stimulated hydrogen radio recombination line (RRL) emission from ionized gas in a $z=0.89$ galaxy using 580--1670 MHz observations from the MeerKAT Absorption Line Survey (MALS). The RRL emission originates in a galaxy that intercepts and strongly lenses the radio blazar PKS 1830-211 ($z=2.5$). This is the second detection of RRLs outside of the local universe and the fi… ▽ More We report the detection of stimulated hydrogen radio recombination line (RRL) emission from ionized gas in a $z=0.89$ galaxy using 580--1670 MHz observations from the MeerKAT Absorption Line Survey (MALS). The RRL emission originates in a galaxy that intercepts and strongly lenses the radio blazar PKS 1830-211 ($z=2.5$). This is the second detection of RRLs outside of the local universe and the first clearly associated with hydrogen. We detect effective H144$α$ (and H163$α$) transitions at observed frequencies of 1156 (798) MHz by stacking 17 (27) RRLs with 21$σ$ (14$σ$) significance. The RRL emission contains two main velocity components and is coincident in velocity with HI 21 cm and OH 18 cm absorption. We use the RRL spectral line energy distribution and a Bayesian analysis to constrain the density ($n_e$) and the volume-averaged pathlength ($\ell$) of the ionized gas. We determine $\log( n_e ) = 2.0_{-0.7}^{+1.0}$ cm$^{-3}$ and $\log( \ell ) = -0.7_{-1.1}^{+1.1}$ pc towards the north east (NE) lensed image, likely tracing the diffuse thermal phase of the ionized ISM in a thin disk. Towards the south west (SW) lensed image, we determine $\log( n_e ) = 3.2_{-1.0}^{+0.4}$ cm$^{-3}$ and $\log( \ell ) = -2.7_{-0.2}^{+1.8}$ pc, tracing gas that is more reminiscent of H II regions. We estimate a star formation (surface density) rate of $Σ_{\mathrm{SFR}} \sim 0.6$ M$_{\odot}$ yr$^{-1}$ kpc$^{-2}$ or SFR $\sim 50$ M$_{\odot}$ yr$^{-1}$, consistent with a star-forming main sequence galaxy of $M_{\star} \sim 10^{11}$ M$_{\odot}$. The discovery presented here opens up the possibility of studying ionized gas at high redshifts using RRL observations from current and future (e.g., SKA and ngVLA) radio facilities. △ Less

Submitted 8 January, 2023; originally announced January 2023.

Comments: 17 pages, 10 figures, 2 tables, accepted in ApJ

The VLT/SPHERE view of the ATOMIUM cool evolved star sample. I. Overview: Sample characterization through polarization analysis

Authors: M. Montargès, E. Cannon, A. de Koter, T. Khouri, E. Lagadec, P. Kervella, L. Decin, I. McDonald, W. Homan, L. B. F. M. Waters, R. Sahai, C. A. Gottlieb, J. Malfait, S. Maes, B. Pimpanuwat, M. Jeste, T. Danilovich, F. De Ceuster, M. Van de Sande, D. Gobrecht, S. H. J. Wallström, K. T. Wong, I. El Mellah, J. Bolte, F. Herpin , et al. (10 additional authors not shown)

Abstract: Aims. Through the ATOMIUM project, based on an ALMA large program, we aim to present a consistent view of a sample of 17 nearby cool evolved stars (Aymptotic Giant Branch and red supergiant stars). Methods. Here we present VLT/SPHERE-ZIMPOL polarimetric maps obtained in the visible of 14 out of the 17 ATOMIUM sources. They were obtained contemporaneously with the ALMA high spatial resolution dat… ▽ More Aims. Through the ATOMIUM project, based on an ALMA large program, we aim to present a consistent view of a sample of 17 nearby cool evolved stars (Aymptotic Giant Branch and red supergiant stars). Methods. Here we present VLT/SPHERE-ZIMPOL polarimetric maps obtained in the visible of 14 out of the 17 ATOMIUM sources. They were obtained contemporaneously with the ALMA high spatial resolution data. To help interpret the polarized signal, we produced synthetic maps of light scattering by dust, through 3D radiative transfer simulations with the RADMC3D code. Results. The degree of linear polarization (DoLP) observed by ZIMPOL spreads across several optical filters. We infer that it primarily probes dust located just outside of the point spread function, and in or near the plane of the sky, with a total optical depth close to unity in the line of sight, representing only a fraction of the total circumstellar dust. The maximum DoLP ranges from 0.03-0.38 depending on the source, fractions that can be reproduced by our 3D pilot models for grains composed of common dust species. The spatial structure of the DoLP shows a diverse set of shapes. Only for three sources do we note a correlation between the ALMA CO and SiO lines, which trace the gas density, and the DoLP, which traces the dust. Conclusion. The clumpiness of the DoLP and the lack of a consistent correlation between the gas and the dust location show that, in the inner circumstellar environment (CSE), dust formation occurs at very specific sites. This has potential consequences for the derived mass-loss rates and dust-to-gas ratio in the inner region of the CSE. Except for $π^1$~Gru and perhaps GY Aql, we do not detect interactions between the circumstellar wind and the hypothesized companions that shape the wind at larger scales. This suggests that the orbits of any other companions are tilted out of the plane of the sky. △ Less

Submitted 5 January, 2023; originally announced January 2023.

Comments: Accepted for publication in Astronomy & Astrophysics. 22 pages, 15 figures, 5 tables

Journal ref: A&A 671, A96 (2023)

Sufficient conditions for linear stability of complex-balanced equilibria in generalized mass-action systems

Authors: Stefan Müller, Georg Regensburger

Abstract: Generalized mass-action systems are power-law dynamical systems arising from chemical reaction networks. Essentially, every nonnegative ODE model used in chemistry and biology (for example, in ecology and epidemiology) and even in economics and engineering can be written in this form. Previous results have focused on existence and uniqueness of special steady states (complex-balanced equilibria) f… ▽ More Generalized mass-action systems are power-law dynamical systems arising from chemical reaction networks. Essentially, every nonnegative ODE model used in chemistry and biology (for example, in ecology and epidemiology) and even in economics and engineering can be written in this form. Previous results have focused on existence and uniqueness of special steady states (complex-balanced equilibria) for all rate constants, thereby ruling out multiple (special) steady states. Recently, necessary conditions for linear stability have been obtained. In this work, we provide sufficient conditions for the linear stability of complex-balanced equilibria for all rate constants (and also for the non-existence of other steady states). In particular, via sign-vector conditions (on the stoichiometric coefficients and kinetic orders), we guarantee that the Jacobian matrix is a $P$-matrix. Technically, we use a new decomposition of the graph Laplacian which allows to consider orders of (generalized) monomials. Alternatively, we use cycle decomposition which allows a linear parametrization of all Jacobian matrices. In any case, we guarantee stability without explicit computation of steady states. We illustrate our results in examples from chemistry and biology: generalized Lotka-Volterra systems and SIR models, a two-component signaling system, and an enzymatic futile cycle. △ Less

Submitted 20 November, 2023; v1 submitted 21 December, 2022; originally announced December 2022.

CompuMat: A Computational Composite Material for Tangible Interaction

Authors: Xinyi Yang, Martin Nisser, Stefanie Mueller

Abstract: This paper introduces a computational composite material comprising layers for actuation, computation and energy storage. Key to its design is inexpensive materials assembled from traditionally available fabrication machines to support the rapid exploration of applications from computational composites. The actuation layer is a soft magnetic sheet that is programmed to either bond, repel, or remai… ▽ More This paper introduces a computational composite material comprising layers for actuation, computation and energy storage. Key to its design is inexpensive materials assembled from traditionally available fabrication machines to support the rapid exploration of applications from computational composites. The actuation layer is a soft magnetic sheet that is programmed to either bond, repel, or remain agnostic to other areas of the sheet. The computation layer is a flexible PCB made from copper-clad kapton engraved by a fiber laser, powered by a third energy-storage layer comprised of 0.4mm-thin lithium polymer batteries. We present the material layup and an accompanying digital fabrication process enabling users to rapidly prototype their own untethered, interactive and tangible prototypes. The material is low-profile, inexpensive, and fully untethered, capable of being used for a variety of applications in HCI and robotics including structural origami and proprioception. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: Xinyi Yang, Martin Nisser, and Stefanie Mueller. 2023. CompuMat: A Computational Composite Material for Tangible Interaction. In ACM TEI '23: Proceedings of the Seventeenth International Conference on Tangible, Embedded, and Embodied Interaction (ACM TEI '23), February 26-March 1, 2023, Warsaw, Poland. ACM, New York, NY, USA, 8 pages

PullupStructs: Digital Fabrication for Folding Structures via Pull-up Nets

Authors: Lauren Niu, Xinyi Yang, Martin Nisser, Stefanie Mueller

Abstract: In this paper, we introduce a method to rapidly create 3D geometries by folding 2D sheets via pull-up nets. Given a 3D structure, we unfold its mesh into a planar 2D sheet using heuristic algorithms and populate these with cutlines and throughholes. We develop a web-based simulation tool that translates users' 3D meshes into manufacturable 2D sheets. After laser-cutting the sheet and feeding threa… ▽ More In this paper, we introduce a method to rapidly create 3D geometries by folding 2D sheets via pull-up nets. Given a 3D structure, we unfold its mesh into a planar 2D sheet using heuristic algorithms and populate these with cutlines and throughholes. We develop a web-based simulation tool that translates users' 3D meshes into manufacturable 2D sheets. After laser-cutting the sheet and feeding thread through these throughholes to form a pull-up net, pulling the thread will fold the sheet into the 3D structure using a single degree of freedom. We introduce the fabrication process and build a variety of prototypes demonstrating the method's ability to rapidly create a breadth of geometries suitable for low-fidelity prototyping that are both load-bearing and aesthetic across a range of scales. Future work will expand the breadth of geometries available and evaluate the ability of our prototypes to sustain structural loads. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: In ACM TEI '23: Proceedings of the Seventeenth International Conference on Tangible, Embedded, and Embodied Interaction (ACM TEI '23), February 26-March 1, 2023, Warsaw, Poland. ACM, New York, NY, USA, 10 pages

A 64-core mixed-signal in-memory compute chip based on phase-change memory for deep neural network inference

Authors: Manuel Le Gallo, Riduan Khaddam-Aljameh, Milos Stanisavljevic, Athanasios Vasilopoulos, Benedikt Kersting, Martino Dazzi, Geethan Karunaratne, Matthias Braendli, Abhairaj Singh, Silvia M. Mueller, Julian Buechel, Xavier Timoneda, Vinay Joshi, Urs Egger, Angelo Garofalo, Anastasios Petropoulos, Theodore Antonakopoulos, Kevin Brew, Samuel Choi, Injo Ok, Timothy Philip, Victor Chan, Claire Silvestre, Ishtiaq Ahsan, Nicole Saulnier , et al. (4 additional authors not shown)

Abstract: The need to repeatedly shuttle around synaptic weight values from memory to processing units has been a key source of energy inefficiency associated with hardware implementation of artificial neural networks. Analog in-memory computing (AIMC) with spatially instantiated synaptic weights holds high promise to overcome this challenge, by performing matrix-vector multiplications (MVMs) directly withi… ▽ More The need to repeatedly shuttle around synaptic weight values from memory to processing units has been a key source of energy inefficiency associated with hardware implementation of artificial neural networks. Analog in-memory computing (AIMC) with spatially instantiated synaptic weights holds high promise to overcome this challenge, by performing matrix-vector multiplications (MVMs) directly within the network weights stored on a chip to execute an inference workload. However, to achieve end-to-end improvements in latency and energy consumption, AIMC must be combined with on-chip digital operations and communication to move towards configurations in which a full inference workload is realized entirely on-chip. Moreover, it is highly desirable to achieve high MVM and inference accuracy without application-wise re-tuning of the chip. Here, we present a multi-core AIMC chip designed and fabricated in 14-nm complementary metal-oxide-semiconductor (CMOS) technology with backend-integrated phase-change memory (PCM). The fully-integrated chip features 64 256x256 AIMC cores interconnected via an on-chip communication network. It also implements the digital activation functions and processing involved in ResNet convolutional neural networks and long short-term memory (LSTM) networks. We demonstrate near software-equivalent inference accuracy with ResNet and LSTM networks while implementing all the computations associated with the weight layers and the activation functions on-chip. The chip can achieve a maximal throughput of 63.1 TOPS at an energy efficiency of 9.76 TOPS/W for 8-bit input/output matrix-vector multiplications. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Journal ref: Nature Electronics 6, 680-693 (2023)

PKS1413+135: OH and HI at z = 0.247 with MeerKAT

Authors: F. Combes, N. Gupta, S. Muller, S. Balashev, P. Deka, K. Emig, H. -R. Kloeckner, D. Klutse, K. Knowles, A. Mohapatra, E. Momjian, P. Noterdaeme, P. Petitjean, P. Salas, R. Srianand, J. Wagenveld

Abstract: The BL Lac PKS 1413+135 was observed by the Large Survey Project "MeerKAT Absorption Line Survey" (MALS) in the L-band, at 1139 MHz and 1293-1379 MHz, targeting the HI and OH lines in absorption at z = 0.24671. The radio continuum is thought to come from a background object at redshift lower than 0.5, as suggested by the absence of gravitational images. The HI absorption line is detected at high s… ▽ More The BL Lac PKS 1413+135 was observed by the Large Survey Project "MeerKAT Absorption Line Survey" (MALS) in the L-band, at 1139 MHz and 1293-1379 MHz, targeting the HI and OH lines in absorption at z = 0.24671. The radio continuum is thought to come from a background object at redshift lower than 0.5, as suggested by the absence of gravitational images. The HI absorption line is detected at high signal-to-noise, with a narrow central component, and a red wing, confirming previous results. The OH 1720 MHz line is clearly detected in (maser) emission, peaking at a velocity shifted by -10 to -15 km/s with respect to the HI peak. The 1612 MHz line is lost due to radio interferences. The OH 1667 MHz main line is tentatively detected in absorption, but not the 1665 MHz one. Over 30 years, a high variability is observed in optical depths, due to the rapid changes of the line of sight, caused by the superluminal motions of the radio knots. The HI line has varied by 20 per cent in depth, while the OH-1720 MHz depth has varied by a factor 4. The position of the central velocity and the widths also varied. The absorbing galaxy is an early-type spiral (maybe S0) seen edge-on, with a prominent dust lane, covering the whole disk. Given the measured mass concentration, and the radio continuum size at centimeter wavelengths (100 mas corresponding to 400 pc at z = 0.25), the width of absorption lines from the nuclear regions are expected up to 250 km/S. The narrowness of the observed lines (< 15 km/s) suggest that the absorption comes from an outer gas ring, as frequently observed in S0 galaxies. The millimetric lines are even narrower (< 1 km/s), which corresponds to the continuum size restricted to the core. The core source is covered by individual 1 pc molecular clouds, of column density a few 10^22 cm-2, which is compatible with the gas screen detected in X-rays. △ Less

Submitted 2 January, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Comments: 7 pages, 6 figures, accepted in A&A

Journal ref: A&A 671, A43 (2023)

Towards a new era in giant exoplanet characterisation

Authors: Simon Müller, Ravit Helled

Abstract: Determining the composition of giant exoplanets is crucial for understanding their origin and evolution. However, the planetary bulk composition is not measured directly but must be deduced from a combination of mass-radius measurements, knowledge of the planetary age and evolution simulations. Accurate determinations of stellar ages, mass-radius, and atmospheric compositions from upcoming mission… ▽ More Determining the composition of giant exoplanets is crucial for understanding their origin and evolution. However, the planetary bulk composition is not measured directly but must be deduced from a combination of mass-radius measurements, knowledge of the planetary age and evolution simulations. Accurate determinations of stellar ages, mass-radius, and atmospheric compositions from upcoming missions can significantly improve the determination of the heavy-element mass in giant planets. In this paper, we first demonstrate the importance of an accurate age measurement, as expected from Plato, in constraining the planetary properties. Well-determined stellar ages can reduce the bulk-metallicity uncertainty up to about a factor of two. We next infer the bulk metallicity of warm giants from the Ariel mission reference sample and identify the Ariel high-priority targets for which a measured atmospheric metallicity can clearly break the degeneracy in the inferred composition. We show that knowledge of the atmospheric metallicity can broadly reduce the bulk-metallicity uncertainty by a factor of four to eight. We conclude that the accurate age determination from Plato and atmospheric measurements by Ariel and the James Webb Space Telescope will play a key role in revealing the composition of giant exoplanets. △ Less

Submitted 24 May, 2023; v1 submitted 10 November, 2022; originally announced November 2022.

Comments: 11 pages, 12 figures, 2 tables, accepted for publication in Astronomy & Astrophysics; grammar and typos corrected; additional typo corrected

Journal ref: A&A 669, A24 (2023)

Observation of multi-directional energy transfer in a hybrid plasmonic-excitonic nanostructure

Authors: Tommaso Pincelli, Thomas Vasileiadis, Shuo Dong, Samuel Beaulieu, Maciej Dendzik, Daniela Zahn, Sang-Eun Lee, Hélène Seiler, Yinpeng Qi, R. Patrick Xian, Julian Maklar, Emerson Coy, Niclas S. Müller, Yu Okamura, Stephanie Reich, Martin Wolf, Laurenz Rettig, Ralph Ernstorfer

Abstract: Hybrid plasmonic devices involve a nanostructured metal supporting localized surface plasmons to amplify light-matter interaction, and a non-plasmonic material to functionalize charge excitations. Application-relevant epitaxial heterostructures, however, give rise to ballistic ultrafast dynamics that challenge the conventional semiclassical understanding of unidirectional nanometal-to-substrate en… ▽ More Hybrid plasmonic devices involve a nanostructured metal supporting localized surface plasmons to amplify light-matter interaction, and a non-plasmonic material to functionalize charge excitations. Application-relevant epitaxial heterostructures, however, give rise to ballistic ultrafast dynamics that challenge the conventional semiclassical understanding of unidirectional nanometal-to-substrate energy transfer. We study epitaxial Au nanoislands on WSe$_2$ with time- and angle-resolved photoemission spectroscopy and femtosecond electron diffraction: this combination of techniques resolves material, energy and momentum of charge-carriers and phonons excited in the heterostructure. We observe a strong non-linear plasmon-exciton interaction that transfers the energy of sub-bandgap photons very efficiently to the semiconductor, leaving the metal cold until non-radiative exciton recombination heats the nanoparticles on hundreds of femtoseconds timescales. Our results resolve a multi-directional energy exchange on timescales shorter than the electronic thermalization of the nanometal. Electron-phonon coupling and diffusive charge-transfer determine the subsequent energy flow. This complex dynamics opens perspectives for optoelectronic and photocatalytic applications, while providing a constraining experimental testbed for state-of-the-art modelling. △ Less

Submitted 29 November, 2022; v1 submitted 8 November, 2022; originally announced November 2022.

Development of a 3D model of clinically relevant microcalcifications

Authors: Ann-Katherine Carton, Clément Jailin, Raoul de Sousa Silva, Ruben Sanchez de la Rosa, Serge Muller

Abstract: A realistic 3D anthropomorphic software model of microcalcifications may serve as a useful tool to assess the performance of breast imaging applications through simulations. We present a method allowing to simulate visually realistic microcalcifications with large morphological variability. Principal component analysis (PCA) was used to analyze the shape of 281 biopsied microcalcifications imaged… ▽ More A realistic 3D anthropomorphic software model of microcalcifications may serve as a useful tool to assess the performance of breast imaging applications through simulations. We present a method allowing to simulate visually realistic microcalcifications with large morphological variability. Principal component analysis (PCA) was used to analyze the shape of 281 biopsied microcalcifications imaged with a micro-CT. The PCA analysis requires the same number of shape components for each input microcalcification. Therefore, the voxel-based microcalcifications were converted to a surface mesh with same number of vertices using a marching cube algorithm. The vertices were registered using an iterative closest point algorithm and a simulated annealing algorithm. To evaluate the approach, input microcalcifications were reconstructed by progressively adding principal components. Input and reconstructed microcalcifications were visually and quantitatively compared. New microcalcifications were simulated using randomly sampled principal components determined from the PCA applied to the input microcalcifications, and their realism was appreciated through visual assessment. Preliminary results have shown that input microcalcifications can be reconstructed with high visual fidelity when using 62 principal components, representing 99.5% variance. For that condition, the average L2 norm and dice coefficient were respectively 10.5 $μ$m and 0.93. Newly generated microcalcifications with 62 principal components were found to be visually similar, while not identical, to input microcalcifications. The proposed PCA model of microcalcification shapes allows to successfully reconstruct input microcalcifications and to generate new visually realistic microcalcifications with various morphologies. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Journal ref: Sixteenth International Workshop on Breast Imaging, May 2022, Leuven, Belgium. pp.38

Computing torsion subgroups of Jacobians of hyperelliptic curves of genus 3

Authors: J. Steffen Müller, Berno Reitsma

Abstract: We introduce an algorithm to compute the rational torsion subgroup of the Jacobian of a hyperelliptic curve of genus 3 over the rationals. We apply a Magma implementation of our algorithm to a database of curves with low discriminant due to Sutherland as well as a list of curves with small coefficients. In the process, we find several torsion structures not previously described in the literature.… ▽ More We introduce an algorithm to compute the rational torsion subgroup of the Jacobian of a hyperelliptic curve of genus 3 over the rationals. We apply a Magma implementation of our algorithm to a database of curves with low discriminant due to Sutherland as well as a list of curves with small coefficients. In the process, we find several torsion structures not previously described in the literature. The algorithm is a generalisation of an algorithm for genus 2 due to Stoll, which we extend to abelian varieties satisfying certain conditions. The idea is to compute p-adic torsion lifts of points over finite fields using the Kummer variety and to check whether they are rational using heights. Both have been made explicit for Jacobians of hyperelliptic curves of genus 3 by Stoll. This article is partially based on the second-named author's Master thesis. △ Less

Submitted 16 March, 2023; v1 submitted 7 November, 2022; originally announced November 2022.

Comments: Fixed typos; to appear in Research in Number Theory

MSC Class: 11G10; 11G30; 14H40; 14K15

Invariant Grassmannians and a K3 surface with an action of order 192*2

Authors: Stevell Muller

Abstract: Given a complex vector space $V$ of finite dimension, its Grassmannian variety parametrizes all subspaces of $V$ of a given dimension. Similarly, if a finite group $G$ acts on $V$, its invariant Grassmannian parametrizes all the $G$-invariant subspaces of $V$ of a given dimension. Based on this fact, we develop an algorithm for computing $G$-invariant projective varieties arising as an intersectio… ▽ More Given a complex vector space $V$ of finite dimension, its Grassmannian variety parametrizes all subspaces of $V$ of a given dimension. Similarly, if a finite group $G$ acts on $V$, its invariant Grassmannian parametrizes all the $G$-invariant subspaces of $V$ of a given dimension. Based on this fact, we develop an algorithm for computing $G$-invariant projective varieties arising as an intersection of hypersurfaces of the same degree. We apply the algorithm to find a projective model of a polarized K3 surface with a faithful action of $T_{192}\rtimes μ_2$ and some further symmetric K3 surfaces with a degree 8 polarization. △ Less

Submitted 30 April, 2024; v1 submitted 26 October, 2022; originally announced October 2022.

Comments: Revised version after referees' reports; accepted for publication in Journal of Computational Algebra

A simple recipe to create three-dimensional reciprocal space maps

Authors: Rafaela F. S. Penacchio, Maurício B. Estradiote, Sérgio L. Morelhão, Celso I. Fornari, Philipp Kagerer, Marco Dittmar, Simon Müller, Friedrich Reinert

Abstract: Combinations of advanced X-ray sources and zero-noise detector of enormous dynamic range have significantly increased the opportunity of mapping the reciprocal space of crystal lattices. It is particularly important in the design of new devices based on epitaxial thin films. In this work, we present a simple approach to the three-dimensional geometry involved in plotting reciprocal space maps, alo… ▽ More Combinations of advanced X-ray sources and zero-noise detector of enormous dynamic range have significantly increased the opportunity of mapping the reciprocal space of crystal lattices. It is particularly important in the design of new devices based on epitaxial thin films. In this work, we present a simple approach to the three-dimensional geometry involved in plotting reciprocal space maps, along with an example of computer codes to allow X-ray users to write their own codes. Experimental data used to illustrate an application of the codes are from antimony telluride epitaxial film on barium difluoride substrate. △ Less

Submitted 11 October, 2022; originally announced October 2022.

Comments: 5 pages, 3 figures, MatLab codes, link to GitHub

The Opaque Heart of the Galaxy IC 860: Analogous Protostellar, Kinematics, Morphology, and Chemistry

Authors: M. D. Gorski, S. Aalto, S. König, C. Wethers, C. Yang, S. Muller, S. Viti, J. H. Black, K. Onishi, M. Sato

Abstract: Compact Obscured Nuclei (CONs) account for a significant fraction of the population of luminous and ultraluminous infrared galaxies (LIRGs and ULIRGs). These galaxy nuclei are compact, with radii of 10-100~pc, with large optical depths at submm and far-infrared wavelengths, and characterized by vibrationally excited HCN emission. It is not known what powers the large luminosities of the CON host g… ▽ More Compact Obscured Nuclei (CONs) account for a significant fraction of the population of luminous and ultraluminous infrared galaxies (LIRGs and ULIRGs). These galaxy nuclei are compact, with radii of 10-100~pc, with large optical depths at submm and far-infrared wavelengths, and characterized by vibrationally excited HCN emission. It is not known what powers the large luminosities of the CON host galaxies because of the extreme optical depths towards their nuclei. CONs represent an extreme phase of nuclear growth, hiding either a rapidly accreting supermassive black hole or an abnormal mode of star formation. Here we apply principal component analysis (PCA) tomography to high-resolution (0.06$^{\prime\prime}$) ALMA observations at frequencies 245 to 265~GHz of the nearby CON (59~Mpc) IC~860. PCA is a technique to unveil correlation in the data parameter space, and we apply it to explore the morphological and chemical properties of species in our dataset. The leading principal components reveal morphological features in molecular emission that suggest a rotating, infalling disk or envelope, and an outflow analogous to those seen in Galactic protostars. One particular molecule of astrochemical interest is methanimine (CH$_2$NH), a precursor to glycine, three transitions of which have been detected towards IC 860. We estimate the average CH$_2$NH column density towards the nucleus of IC~860 to be $\sim10^{17}$cm$^{-2}$, with an abundance exceeding $10^{-8}$ relative to molecular hydrogen, using the rotation diagram method and non-LTE radiative transfer models. This CH$_2$NH abundance is consistent with those found in hot cores of molecular clouds in the Milky Way. Our analysis suggests that CONs are an important stage of chemical evolution in galaxies, that are chemically and morphologically similar to Milky Way hot cores. △ Less

Submitted 3 January, 2023; v1 submitted 10 October, 2022; originally announced October 2022.

Comments: 17 pages, 14 figures, submitted to Astronomy and Astrophysics

Journal ref: A&A 670, A70 (2023)

Accelerated Molecular Vibrational Decay and Suppressed Electronic Nonlinearities in Plasmonic Cavities through Coherent Raman Scattering

Authors: Lukas A. Jakob, William M. Deacon, Rakesh Arul, Bart de Nijs, Niclas S. Mueller, Jeremy J. Baumberg

Abstract: Molecular vibrations and their dynamics are of outstanding importance for electronic and thermal transport in nanoscale devices as well as for molecular catalysis. The vibrational dynamics of <100 molecules are studied through three-colour time-resolved coherent anti-Stokes Raman spectroscopy (trCARS) using plasmonic nanoantennas. This isolates molecular signals from four-wave mixing (FWM), while… ▽ More Molecular vibrations and their dynamics are of outstanding importance for electronic and thermal transport in nanoscale devices as well as for molecular catalysis. The vibrational dynamics of <100 molecules are studied through three-colour time-resolved coherent anti-Stokes Raman spectroscopy (trCARS) using plasmonic nanoantennas. This isolates molecular signals from four-wave mixing (FWM), while using exceptionally low nanowatt powers to avoid molecular damage via single-photon lock-in detection. FWM is found to be strongly suppressed in nm-wide plasmonic gaps compared to plasmonic nanoparticles. The ultrafast vibrational decay rates of biphenyl-4-thiol molecules are accelerated ten-fold by a transient rise in local non-equilibrium temperature excited by enhanced, pulsed optical fields within these plasmonic nanocavities. Separating the contributions of vibrational population decay and dephasing carefully explores the vibrational decay channels of these tightly confined molecules. Such extreme plasmonic enhancement within nanogaps opens up prospects for measuring single-molecule vibrationally-coupled dynamics and diverse molecular optomechanics phenomena. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Predicting cell stress and strain during extrusion bioprinting

Authors: Sebastian Johannes Müller, Ben Fabry, Stephan Gekle

Abstract: Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations to… ▽ More Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations together with a finite-element based cell model to study cell deformation at the nozzle exit. Our simulation results are in good qualitative agreement with experimental microscopy images. We show that for cells flowing in the center of the nozzle extensional stresses can be significant, while for cells flowing off-center their deformation is dominated by the shear flow inside the nozzle. From the results of these simulations, we develop two simple methods that only require the printing parameters (nozzle diameter, flow rate, bioink rheology) to (i) accurately predict the maximum cell stress occurring during the 3D bioprinting process and (ii) approximately predict the cell strains caused by the elongational flow at the nozzle exit. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: Manuscript: 14 pages, 14 figures Supplementary Information attached

Tracing Interstellar Heating: An ALCHEMI Measurement of the HCN Isomers in NGC 253

Authors: Erica Behrens, Jeffrey G. Mangum, Jonathan Holdship, Serena Viti, Nanase Harada, Sergio Martin, Kazushi Sakamoto, Sebastien Muller, Kunihiko Tanaka, Kouichiro Nakanishi, Ruben Herrero-Illana, Yuki Yoshimura, Rebeca Aladro, Laura Colzi, Kimberly L. Emig, Christian Henkel, Ko-Yun Huang, P. K. Humire, David S. Meier, Victor M. Rivilla

Abstract: We analyze HCN and HNC emission in the nearby starburst galaxy NGC 253 to investigate its effectiveness in tracing heating processes associated with star formation. This study uses multiple HCN and HNC rotational transitions observed using ALMA via the ALCHEMI Large Program. To understand the conditions and associated heating mechanisms within NGC 253's dense gas, we employ Bayesian nested samplin… ▽ More We analyze HCN and HNC emission in the nearby starburst galaxy NGC 253 to investigate its effectiveness in tracing heating processes associated with star formation. This study uses multiple HCN and HNC rotational transitions observed using ALMA via the ALCHEMI Large Program. To understand the conditions and associated heating mechanisms within NGC 253's dense gas, we employ Bayesian nested sampling techniques applied to chemical and radiative transfer models which are constrained using our HCN and HNC measurements. We find that the volume density $n_{\text{H}_{2}}$ and cosmic ray ionization rate (CRIR) $ζ$ are enhanced by about an order of magnitude in the galaxy's central regions as compared to those further from the nucleus. In NGC 253's central GMCs, where observed HCN/HNC abundance ratios are lowest, $n \sim 10^{5.5}$ cm$^{-3}$ and $ζ\sim 10^{-12}$ s$^{-1}$ (greater than $10^4$ times the average Galactic rate). We find a positive correlation in the association of both density and CRIR with the number of star formation-related heating sources (supernova remnants, HII regions, and super hot cores) located in each GMC, as well as a correlation between CRIRs and supernova rates. Additionally, we see an anticorrelation between the HCN/HNC ratio and CRIR, indicating that this ratio will be lower in regions where $ζ$ is higher. Though previous studies suggested HCN and HNC may reveal strong mechanical heating processes in NGC 253's CMZ, we find cosmic ray heating dominates the heating budget, and mechanical heating does not play a significant role in the HCN and HNC chemistry. △ Less

Submitted 8 November, 2022; v1 submitted 13 September, 2022; originally announced September 2022.

Comments: 33 pages, 23 figures, accepted for publication by the Astrophysical Journal

Central schemes for networked scalar conservation laws

Authors: Michael Herty, Niklas Kolbe, Siegfried Müller

Abstract: We propose a novel scheme to numerically solve scalar conservation laws on networks without the necessity to solve Riemann problems at the junction. The scheme is derived using the relaxation system introduced in [Jin and Xin, Comm. Pure Appl. Math. 48(3), 235-276 (1995)] and taking the relaxation limit also at the nodes of the network. The scheme is mass conservative and yields well defined and e… ▽ More We propose a novel scheme to numerically solve scalar conservation laws on networks without the necessity to solve Riemann problems at the junction. The scheme is derived using the relaxation system introduced in [Jin and Xin, Comm. Pure Appl. Math. 48(3), 235-276 (1995)] and taking the relaxation limit also at the nodes of the network. The scheme is mass conservative and yields well defined and easy-to-compute coupling conditions even for general networks. We discuss higher order extension of the scheme and applications to traffic flow and two-phase flow. In the former we compare with results obtained in literature. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: 29 pages, 8 figures

MSC Class: 65M08; 35R02; 35L02

Rotational spectroscopy of mono-deuterated oxirane ($c$-C$_2$H$_3$DO) and its detection towards IRAS 16293$-$2422 B

Authors: Holger S. P. Müller, Jes K. Jørgensen, Jean-Claude Guillemin, Frank Lewen, Stephan Schlemmer

Abstract: We prepared a sample of mono-deuterated oxirane and studied its rotational spectrum in the laboratory between 490 GHz and 1060 GHz in order to improve its spectroscopic parameters and consequently the calculated rest frequencies of its rotational transitions. The updated rest frequencies were employed to detect $c$-C$_2$H$_3$DO for the first time in the interstellar medium in the Atacama Large Mil… ▽ More We prepared a sample of mono-deuterated oxirane and studied its rotational spectrum in the laboratory between 490 GHz and 1060 GHz in order to improve its spectroscopic parameters and consequently the calculated rest frequencies of its rotational transitions. The updated rest frequencies were employed to detect $c$-C$_2$H$_3$DO for the first time in the interstellar medium in the Atacama Large Millimetre/submillimetre Array (ALMA) Protostellar Interferometric Line Survey (PILS) of the Class 0 protostellar system IRAS 16293$-$2422. Fits of the detected lines using the rotation diagrams yield a temperature of $T_{\rm rot} = 103 \pm 19$ K, which in turn agrees well with 125 K derived for the $c$-C$_2$H$_4$O main isotopologue previously. The $c$-C$_2$H$_3$DO to $c$-C$_2$H$_4$O ratio is found to be $\sim$0.15 corresponding to a D-to-H ratio of $\sim$0.036 per H atom which is slightly higher than the D-to-H ratio of species such as methanol, formaldehyde, ketene and but lower than those of the larger complex organic species such as ethanol, methylformate and glycolaldehyde. This may reflect that oxirane is formed fairly early in the evolution of the prestellar cores. The identification of doubly deuterated oxirane isotopomers in the PILS data may be possible judged by the amount of mono-deuterated oxirane and the observed trend that multiply deuterated isotopologues have higher deuteration rates than their mono-deuterated variants. △ Less

Submitted 3 September, 2022; originally announced September 2022.

Comments: 10 pages total; Mon. Not. R. Astron. Soc., accepted

Journal ref: Mon. Not. R. Astron. Soc., 518, 185-193 (2023)

ALCHEMI finds a "shocking" carbon footprint in the starburst galaxy NGC~253

Authors: Nanase Harada, Sergio Martin, Jeff Mangum, Kazushi Sakamoto, Sebastian Muller, Victor Rivilla, Christian Henkel, David Meier, Laura Colzi, Mitsuyoshi Yamagishi, Kunihiko Tanaka, Kouichiro Nakanishi, Ruben Herrero-Illana, Yuki Yoshimura, Pedro Humire, Rebeca Aladro, Paul van der Werf, Kim Emig

Abstract: Centers of starburst galaxies may be characterized by a specific gas and ice chemistry due to their gas dynamics and the presence of various ice desorption mechanisms. This may result in a peculiar observable composition. We analyze abundances of $CO_2$, a reliable tracer of ice chemistry, from data collected as part of the ALMA large program ALCHEMI, a wide-frequency spectral scan toward the star… ▽ More Centers of starburst galaxies may be characterized by a specific gas and ice chemistry due to their gas dynamics and the presence of various ice desorption mechanisms. This may result in a peculiar observable composition. We analyze abundances of $CO_2$, a reliable tracer of ice chemistry, from data collected as part of the ALMA large program ALCHEMI, a wide-frequency spectral scan toward the starburst galaxy NGC~253 with an angular resolution of 1.6$''$. We constrain the $CO_2$ abundances in the gas phase using its protonated form $HOCO^+$. The distribution of $HOCO^+$ is similar to that of methanol, which suggests that $HOCO^+$ is indeed produced from the protonation of $CO_2$ sublimated from ice. The $HOCO^+$ fractional abundances are found to be $(1-2)\times10^{-9}$ at the outer part of the central molecular zone (CMZ), while they are lower ($\sim10^{-10}$) near the kinematic center. This peak fractional abundance at the outer CMZ is comparable to that in the Milky Way CMZ, and orders of magnitude higher than that in Galactic disk star-forming regions. From the range of $HOCO^+/CO_2$ ratios suggested from chemical models, the gas-phase $CO_2$ fractional abundance is estimated to be $(1-20)\times10^{-7}$ at the outer CMZ, and orders of magnitude lower near the center. We estimate the $CO_2$ ice fractional abundances at the outer CMZ to be $(2-5)\times10^{-6}$ from the literature. A comparison between the ice and gas $CO_2$ abundances suggests an efficient sublimation mechanism. This sublimation is attributed to large-scale shocks at the orbital intersections of the bar and CMZ. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: 22 pages, 9 figures. Accepted for publication in the Astrophysical Journal

Analytical investigation of 1D Darcy-Forchheimer flow under local thermal nonequilibrium

Authors: Siegfried Müller, Michael Rom

Abstract: In the context of transpiration cooling, a 1D porous medium model consisting of a temperature system and a mass-momentum system is derived from the 2D/3D Darcy-Forchheimer equations. The temperatures of the coolant and the solid are assumed to be in local nonequilibrium. This system is analytically verified to have a unique solution. Transpiration cooling simulations are performed by a two-domain… ▽ More In the context of transpiration cooling, a 1D porous medium model consisting of a temperature system and a mass-momentum system is derived from the 2D/3D Darcy-Forchheimer equations. The temperatures of the coolant and the solid are assumed to be in local nonequilibrium. This system is analytically verified to have a unique solution. Transpiration cooling simulations are performed by a two-domain approach, coupling the assembled 1D porous medium solutions with 2D solutions of a hot gas flow solver. A comparison of results obtained by applying the 1D porous medium model with the temperature system either including or neglecting fluid heat conduction justifies the use of the latter simplified system. △ Less

Submitted 29 August, 2022; originally announced August 2022.

Personalized Decision Making -- A Conceptual Introduction

Authors: Scott Mueller, Judea Pearl

Abstract: Personalized decision making targets the behavior of a specific individual, while population-based decision making concerns a sub-population resembling that individual. This paper clarifies the distinction between the two and explains why the former leads to more informed decisions. We further show that by combining experimental and observational studies we can obtain valuable information about in… ▽ More Personalized decision making targets the behavior of a specific individual, while population-based decision making concerns a sub-population resembling that individual. This paper clarifies the distinction between the two and explains why the former leads to more informed decisions. We further show that by combining experimental and observational studies we can obtain valuable information about individual behavior and, consequently, improve decisions over those obtained from experimental studies alone. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Robustness of the Tangle 2.0 Consensus

Authors: Bing-Yang Lin, Daria Dziubałtowska, Piotr Macek, Andreas Penzkofer, Sebastian Müller

Abstract: In this paper, we investigate the performance of the Tangle 2.0 consensus protocol in a Byzantine environment. We use an agent-based simulation model that incorporates the main features of the Tangle 2.0 consensus protocol. Our experimental results demonstrate that the Tangle 2.0 protocol is robust to the bait-and-switch attack up to the theoretical upper bound of the adversary's 33% voting weight… ▽ More In this paper, we investigate the performance of the Tangle 2.0 consensus protocol in a Byzantine environment. We use an agent-based simulation model that incorporates the main features of the Tangle 2.0 consensus protocol. Our experimental results demonstrate that the Tangle 2.0 protocol is robust to the bait-and-switch attack up to the theoretical upper bound of the adversary's 33% voting weight. We further show that the common coin mechanism in Tangle 2.0 is necessary for robustness against powerful adversaries. Moreover, the experimental results confirm that the protocol can achieve around 1s confirmation time in typical scenarios and that the confirmation times of non-conflicting transactions are not affected by the presence of conflicts. △ Less

Submitted 24 August, 2022; v1 submitted 17 August, 2022; originally announced August 2022.

Dynamic Sensor Matching based on Geomagnetic Inertial Navigation

Authors: Simone Müller, Dieter Kranzlmüller

Abstract: Optical sensors can capture dynamic environments and derive depth information in near real-time. The quality of these digital reconstructions is determined by factors like illumination, surface and texture conditions, sensing speed and other sensor characteristics as well as the sensor-object relations. Improvements can be obtained by using dynamically collected data from multiple sensors. However… ▽ More Optical sensors can capture dynamic environments and derive depth information in near real-time. The quality of these digital reconstructions is determined by factors like illumination, surface and texture conditions, sensing speed and other sensor characteristics as well as the sensor-object relations. Improvements can be obtained by using dynamically collected data from multiple sensors. However, matching the data from multiple sensors requires a shared world coordinate system. We present a concept for transferring multi-sensor data into a commonly referenced world coordinate system: the earth's magnetic field. The steady presence of our planetary magnetic field provides a reliable world coordinate system, which can serve as a reference for a position-defined reconstruction of dynamic environments. Our approach is evaluated using magnetic field sensors of the ZED 2 stereo camera from Stereolabs, which provides orientation relative to the North Pole similar to a compass. With the help of inertial measurement unit informations, each camera's position data can be transferred into the unified world coordinate system. Our evaluation reveals the level of quality possible using the earth magnetic field and allows a basis for dynamic and real-time-based applications of optical multi-sensors for environment detection. △ Less

Submitted 30 January, 2024; v1 submitted 12 August, 2022; originally announced August 2022.

Comments: Page 16-25

Journal ref: Journal of WSCG, 2022, Vol.30., No.1-2, ISSN 1213-6972

Mixels: Fabricating Interfaces using Programmable Magnetic Pixels

Authors: Martin Nisser, Yashaswini Makaram, Lucian Covarrubias, Amadou Bah, Faraz Faruqi, Ryo Suzuki, Stefanie Mueller

Abstract: In this paper, we present Mixels, programmable magnetic pixels that can be rapidly fabricated using an electromagnetic printhead mounted on an off-the-shelve 3-axis CNC machine. The ability to program magnetic material pixel-wise with varying magnetic force enables Mixels to create new tangible, tactile, and haptic interfaces. To facilitate the creation of interactive objects with Mixels, we provi… ▽ More In this paper, we present Mixels, programmable magnetic pixels that can be rapidly fabricated using an electromagnetic printhead mounted on an off-the-shelve 3-axis CNC machine. The ability to program magnetic material pixel-wise with varying magnetic force enables Mixels to create new tangible, tactile, and haptic interfaces. To facilitate the creation of interactive objects with Mixels, we provide a user interface that lets users specify the high-level magnetic behavior and that then computes the underlying magnetic pixel assignments and fabrication instructions to program the magnetic surface. Our custom hardware add-on based on an electromagnetic printhead and hall effect sensor clips onto a standard 3-axis CNC machine and can both write and read magnetic pixel values from magnetic material. Our evaluation shows that our system can reliably program and read magnetic pixels of various strengths, that we can predict the behavior of two interacting magnetic surfaces before programming them, that our electromagnet is strong enough to create pixels that utilize the maximum magnetic strength of the material being programmed, and that this material remains magnetized when removed from the magnetic plotter. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Comments: ACM UIST 2022: ACM Symposium on User Interface Software and Technology

Selective Self-Assembly using Re-Programmable Magnetic Pixels

Authors: Martin Nisser, Yashaswini Makaram, Faraz Faruqi, Ryo Suzuki, Stefanie Mueller

Abstract: This paper introduces a method to generate highly selective encodings that can be magnetically "programmed" onto physical modules to enable them to self-assemble in chosen configurations. We generate these encodings based on Hadamard matrices, and show how to design the faces of modules to be maximally attractive to their intended mate, while remaining maximally agnostic to other faces. We derive… ▽ More This paper introduces a method to generate highly selective encodings that can be magnetically "programmed" onto physical modules to enable them to self-assemble in chosen configurations. We generate these encodings based on Hadamard matrices, and show how to design the faces of modules to be maximally attractive to their intended mate, while remaining maximally agnostic to other faces. We derive guarantees on these bounds, and verify their attraction and agnosticism experimentally. Using cubic modules whose faces have been covered in soft magnetic material, we show how inexpensive, passive modules with planar faces can be used to selectively self-assemble into target shapes without geometric guides. We show that these modules can be easily re-programmed for new target shapes using a CNC-based magnetic plotter, and demonstrate self-assembly of 8 cubes in a water tank. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Comments: 2022 IEEE International Conference on Intelligent Robots and Systems (IROS)

Two-dimensional ferromagnetic extension of a topological insulator

Authors: P. Kagerer, C. I. Fornari, S. Buchberger, T. Tschirner, L. Veyrat, M. Kamp, A. V. Tcakaev, V. Zabolotnyy, S. L. Morelhão, B. Geldiyev, S. Müller, A. Fedorov, E. Rienks, P. Gargiani, M. Valvidares, L. C. Folkers, A. Isaeva, B. Büchner, V. Hinkov, R. Claessen, H. Bentmann, F. Reinert

Abstract: Inducing a magnetic gap at the Dirac point of the topological surface state (TSS) in a 3D topological insulator (TI) is a route to dissipationless charge and spin currents. Ideally, magnetic order is present only at the surface and not in the bulk, e.g. through proximity of a ferromagnetic (FM) layer. However, such a proximity-induced Dirac mass gap has not been observed, likely due to insufficien… ▽ More Inducing a magnetic gap at the Dirac point of the topological surface state (TSS) in a 3D topological insulator (TI) is a route to dissipationless charge and spin currents. Ideally, magnetic order is present only at the surface and not in the bulk, e.g. through proximity of a ferromagnetic (FM) layer. However, such a proximity-induced Dirac mass gap has not been observed, likely due to insufficient overlap of TSS and the FM subsystem. Here, we take a different approach, namely FM extension, using a thin film of the 3D TI Bi$_2$Te$_3$, interfaced with a monolayer of the lattice-matched van der Waals ferromagnet MnBi$_2$Te$_4$. Robust 2D ferromagnetism with out-of-plane anisotropy and a critical temperature of $\text{T}_\text{c}\approx$~15 K is demonstrated by X-ray magnetic dichroism and electrical transport measurements. Using angle-resolved photoelectron spectroscopy, we observe the opening of a sizable magnetic gap in the 2D FM phase, while the surface remains gapless in the paramagnetic phase above T$_c$. This sizable gap indicates a relocation of the TSS to the FM ordered Mn moments near the surface, which leads to a large mutual overlap. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Research 5 (2023), L022019

LLWP -- A new Loomis-Wood Software at the Example of Acetone-13C1

Authors: Luis Bonah, Oliver Zingsheim, Holger S. P. Müller, Jean-Claude Guillemin, Frank Lewen, Stephan Schlemmer

Abstract: Acetone-13C1 is a complex organic molecule with two internal methyl (-CH3) rotors having relatively low effective barriers to internal rotation of about 249 cm-1. This leads to two low-lying torsional modes and five internal rotation components resulting in a dense and complicated spectrum. In this study, measurements of acetone-13C1 were performed with an isotopically enriched sample in the frequ… ▽ More Acetone-13C1 is a complex organic molecule with two internal methyl (-CH3) rotors having relatively low effective barriers to internal rotation of about 249 cm-1. This leads to two low-lying torsional modes and five internal rotation components resulting in a dense and complicated spectrum. In this study, measurements of acetone-13C1 were performed with an isotopically enriched sample in the frequency range 37-1102 GHz. Predicted spectra of acetone-13C1 created with ERHAM allow for future radio astronomical searches. Loomis-Wood plots are one approach to improve and fasten the analysis of such crowded spectra. In this study, the new Loomis-Wood software LLWP was used for fast and confident assignments. LLWP focuses on being user-friendly, intuitive, and applicable to a broad range of assignment tasks. The software is presented here and can be downloaded from llwp.astro.uni-koeln.de. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Breast shape estimation and correction in CESM biopsy

Authors: Ruben Sanchez, Clément Jailin, Ann-Katherine Carton, Pablo Milioni de Carvalho, Laurence Casteignau, Serge Muller

Abstract: Description of purpose: Contrast-enhanced spectral mammography can be used to guide needle biopsies. However, in vertical approach the compressed breast is deformed generating a so-called bump in the paddle aperture, which may interfere with the visibility of contrast-uptakes. Local thickness estimation would provide an enhanced image quality of the recombined image, increasing the visibility of t… ▽ More Description of purpose: Contrast-enhanced spectral mammography can be used to guide needle biopsies. However, in vertical approach the compressed breast is deformed generating a so-called bump in the paddle aperture, which may interfere with the visibility of contrast-uptakes. Local thickness estimation would provide an enhanced image quality of the recombined image, increasing the visibility of the contrast-uptakes to be targeted during the biopsy procedure. In this work we propose a method to estimate the shape of the breast bump in biopsy vertical approach. Materials and Methods: Our method consists on two steps: first, we compute a raw thickness which does not take into account the presence of contrast-uptakes; second, we use a physical model to separate the sparse iodine texture from the breast shape. This physical model is composed by a sum of Fourier components, describing the main shape of the bump, a series of low-order polynomials, describing the main compressed thickness, paddle tilt and deflection, and non-linear components describing the translation and rotation of the paddle aperture. A 3D object mimicking a bump was fabricated to test the pertinence of our shape model. Also, clinical images of 21 patients which followed CESM-guided biopsy were visually assessed. Results: Comparison between raw and final estimated thickness of our 3D test object shows an error standard deviation of 0.37 mm similar to the noise standard deviation equals to 0.32 mm. The visual assessment of clinical cases showed that the thickness correction removes the superimposed low-frequency pattern due to non-uniform thickness of the bump, improving the identification of the lesion to be targeted. Conclusion: The proposed method for thickness estimation is adapted to CESM-guided biopsies in vertical approach and it improves the identification of the contrast-uptakes that need to be targeted during the procedure. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Journal ref: Sixteenth International Workshop on Breast Imaging, May 2022, Leuven, Belgium

Journal Impact Factor and Peer Review Thoroughness and Helpfulness: A Supervised Machine Learning Study

Authors: Anna Severin, Michaela Strinzel, Matthias Egger, Tiago Barros, Alexander Sokolov, Julia Vilstrup Mouatt, Stefan Müller

Abstract: The journal impact factor (JIF) is often equated with journal quality and the quality of the peer review of the papers submitted to the journal. We examined the association between the content of peer review and JIF by analysing 10,000 peer review reports submitted to 1,644 medical and life sciences journals. Two researchers hand-coded a random sample of 2,000 sentences. We then trained machine le… ▽ More The journal impact factor (JIF) is often equated with journal quality and the quality of the peer review of the papers submitted to the journal. We examined the association between the content of peer review and JIF by analysing 10,000 peer review reports submitted to 1,644 medical and life sciences journals. Two researchers hand-coded a random sample of 2,000 sentences. We then trained machine learning models to classify all 187,240 sentences as contributing or not contributing to content categories. We examined the association between ten groups of journals defined by JIF deciles and the content of peer reviews using linear mixed-effects models, adjusting for the length of the review. The JIF ranged from 0.21 to 74.70. The length of peer reviews increased from the lowest (median number of words 185) to the JIF group (387 words). The proportion of sentences allocated to different content categories varied widely, even within JIF groups. For thoroughness, sentences on 'Materials and Methods' were more common in the highest JIF journals than in the lowest JIF group (difference of 7.8 percentage points; 95% CI 4.9 to 10.7%). The trend for 'Presentation and Reporting' went in the opposite direction, with the highest JIF journals giving less emphasis to such content (difference -8.9%; 95% CI -11.3 to -6.5%). For helpfulness, reviews for higher JIF journals devoted less attention to 'Suggestion and Solution' and provided fewer Examples than lower impact factor journals. No, or only small differences were evident for other content categories. In conclusion, peer review in journals with higher JIF tends to be more thorough in discussing the methods used but less helpful in terms of suggesting solutions and providing examples. Differences were modest and variability high, indicating that the JIF is a bad predictor for the quality of peer review of an individual manuscript. △ Less

Submitted 19 August, 2022; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 44 pages

CO line observations of OH/IR stars in the inner Galactic Bulge: Characteristics of stars at the tip of the AGB

Authors: H. Olofsson, T. Khouri, B. A. Sargent, A. Winnberg, J. A. D. L. Blommaert, M. A. T. Groenewegen, S. Muller, J. H. Kastner, M. Meixner, M. Otsuka, N. Patel, N. Ryde, S. Srinivasan

Abstract: 12CO and 13CO lines, as well as a mm-wave continuum, have been observed for a sample of 22 OH/IR stars in directions within 2 degrees of the Galactic Centre. Photometry data have been gathered from the literature to construct SEDs and to determine pulsational variability. Radiative transfer models have been used to interpret the data. All stars in the sample were detected in at least one CO line,… ▽ More 12CO and 13CO lines, as well as a mm-wave continuum, have been observed for a sample of 22 OH/IR stars in directions within 2 degrees of the Galactic Centre. Photometry data have been gathered from the literature to construct SEDs and to determine pulsational variability. Radiative transfer models have been used to interpret the data. All stars in the sample were detected in at least one CO line, and 8 objects were detected in 324 GHz continuum. Based on luminosity criteria, the sample is divided into 17 objects that most likely lie within the inner Galactic Bulge, and 5 objects that are most likely foreground objects. The median luminosity of the inner-Galactic-Bulge objects, 5600 Lsun, corresponds to an initial mass in the range 1.2-1.6 Msun, indicating that these OH/IR stars descend from solar-type stars. The objects in this sub-sample are further divided into two classes based on their SED characteristics: 11 objects have SEDs that are well matched by models invoking dust envelopes extending from a few stellar radii and outwards, while 6 objects are better modelled as having detached dust envelopes with inner radii in the range 200-600 au and warmer central stars. The former objects have periodic variability, while the latter objects are predominantly non-periodic. The median gas-mass-loss rate, gas terminal expansion velocity, gas-to-dust mass ratio, and circumstellar 12CO/13CO abundance ratio have been estimated to be 2x10{-5} Msun/yr, 18 km/s, 200 (excluding the sources with detached dust envelopes, which show markedly lower gas-to-dust ratios), and 5, respectively, for the inner-Galactic-Bulge objects. The inner-Galactic-Bulge OH/IR stars studied here constitute an excellent sample of equidistant objects for the purpose of understanding the evolution of the mass-loss-rate characteristics at the tip of the AGB. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Comments: 32 pages, 17 figures

Lesion detection in contrast enhanced spectral mammography

Authors: Clément Jailin, Pablo Milioni, Zhijin Li, Răzvan Iordache, Serge Muller

Abstract: Background \& purpose: The recent emergence of neural networks models for the analysis of breast images has been a breakthrough in computer aided diagnostic. This approach was not yet developed in Contrast Enhanced Spectral Mammography (CESM) where access to large databases is complex. This work proposes a deep-learning-based Computer Aided Diagnostic development for CESM recombined images able to… ▽ More Background \& purpose: The recent emergence of neural networks models for the analysis of breast images has been a breakthrough in computer aided diagnostic. This approach was not yet developed in Contrast Enhanced Spectral Mammography (CESM) where access to large databases is complex. This work proposes a deep-learning-based Computer Aided Diagnostic development for CESM recombined images able to detect lesions and classify cases. Material \& methods: A large CESM diagnostic dataset with biopsy-proven lesions was collected from various hospitals and different acquisition systems. The annotated data were split on a patient level for the training (55%), validation (15%) and test (30%) of a deep neural network with a state-of-the-art detection architecture. Free Receiver Operating Characteristic (FROC) was used to evaluate the model for the detection of 1) all lesions, 2) biopsied lesions and 3) malignant lesions. ROC curve was used to evaluate breast cancer classification. The metrics were finally compared to clinical results. Results: For the evaluation of the malignant lesion detection, at high sensitivity (Se>0.95), the false positive rate was at 0.61 per image. For the classification of malignant cases, the model reached an Area Under the Curve (AUC) in the range of clinical CESM diagnostic results. Conclusion: This CAD is the first development of a lesion detection and classification model for CESM images. Trained on a large dataset, it has the potential to be used for helping the management of biopsy decision and for helping the radiologist detecting complex lesions that could modify the clinical treatment. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Journal ref: Sixteenth International Workshop on Breast Imaging, May 2022, Leuven, Belgium. pp.24