-
Thermal conductivity of polymers: A simple matter where complexity matters
Authors:
Debashish Mukherji
Abstract:
Thermal conductivity coefficient $κ$ measures the ability of a material to conduct a heat current. In particular, $κ$ is an important property that often dictates the usefulness of a material over a wide range of environmental conditions. For example, while a low $κ$ is desirable for the thermoelectric applications, a large $κ$ is needed when a material is used under the high temperature condition…
▽ More
Thermal conductivity coefficient $κ$ measures the ability of a material to conduct a heat current. In particular, $κ$ is an important property that often dictates the usefulness of a material over a wide range of environmental conditions. For example, while a low $κ$ is desirable for the thermoelectric applications, a large $κ$ is needed when a material is used under the high temperature conditions. These materials range from common crystals to commodity amorphous polymers. The latter is of particular importance because of their use in designing light weight high performance functional materials. In this context, however, one of the major limitations of the amorphous polymers is their low $κ$, reaching a maximum value of about 0.4 W/Km that is 2--3 orders of magnitude smaller than the standard crystals. Moreover, when energy is predominantly transferred through the bonded connections, $κ\ge 100$ W/Km. Recently, extensive efforts have been devoted to attain a tunability in $κ$ via macromolecular engineering. In this work, an overview of the recent results on the $κ$ behavior in polymers and polymeric solids is presented. In particular, computational and theoretical results are discussed within the context of complimentary experiments. Future directions are also highlighted.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
Smart polymer solution and thermal conductivity: How important is an exact polymer conformation?
Authors:
Mokter M. Chowdhury,
Robinson Cortes-Huerto,
Debashish Mukherji
Abstract:
Heat management in devices is a key to their efficiency and longevity. Here, thermal switches (TS) are of great importance because of their ability to transition between different thermal conductivity $κ$ states. While traditional TS are bulky and slow, recent experiments have suggested "smart" responsive (bio--inspired) polymers as their fast alternatives. One example is poly(N--isopropylacrylami…
▽ More
Heat management in devices is a key to their efficiency and longevity. Here, thermal switches (TS) are of great importance because of their ability to transition between different thermal conductivity $κ$ states. While traditional TS are bulky and slow, recent experiments have suggested "smart" responsive (bio--inspired) polymers as their fast alternatives. One example is poly(N--isopropylacrylamide) (PNIPAM) in water, where $κ$ drops suddenly around a temperature $T_{\ell} \simeq 305$ K when a PNIPAM undergoes a coil--to--globule transition. At a first glance, this may suggest that the change in polymer conformation has a direct influence on TS. However, it may be presumptuous to trivially "only" link conformations with TS, especially because many complex microscopic details control macroscopic conformational transition. Motivated by this, we study TS in "smart" polymers using generic simulations. As the test cases, we investigate two different modes of polymer collapse using external stimuli, i.e., changing $T$ and cosolvent mole fraction $x_{\rm c}$. Collapse upon increasing $T$ shows a direct correlation between the conformation and $κ$ switching, while no correlation is observed in the latter case. These results suggest that the (co--)solvent--monomer interactions play a greater important role than the exact conformation in dictating TS. While some results are compared with the available experiments, possible future directions are also highlighted.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Computing the thermal transport coefficient of neutral amorphous polymers using exact vibrational density of states: Comparison with experiments
Authors:
Debashish Mukherji
Abstract:
Thermal transport coefficient $κ$ is an important property that often dictates broad applications of a polymeric material, while at the same time its computation remains challenging. In particular, classical simulations overestimate $κ$ than the experimentally measured $κ^{\rm exp}$ and thus hinder their meaningful comparison. This is even when very careful simulations are performed using the most…
▽ More
Thermal transport coefficient $κ$ is an important property that often dictates broad applications of a polymeric material, while at the same time its computation remains challenging. In particular, classical simulations overestimate $κ$ than the experimentally measured $κ^{\rm exp}$ and thus hinder their meaningful comparison. This is even when very careful simulations are performed using the most accurate empirical potentials. A key reason for such a discrepancy is because polymers have quantum--mechanical, nuclear degrees--of--freedom whose contribution to the heat balance is non--trivial. In this work, two semi--analytical approaches are considered to accurately compute $κ$ by using the exact vibrational density of states $g(ν)$. The first approach is based within the framework of the minimum thermal conductivity model, while the second uses computed quantum heat capacity to scale $κ$. Computed $κ$ of a set of commodity polymers compares quantitatively with $κ^{\rm exp}$.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Thermal conductivity of bottle-brush polymers
Authors:
Manoj Kumar Maurya,
Tobias Laschuetza,
Manjesh Kumar Singh,
Debashish Mukherji
Abstract:
Using molecular dynamics (MD) simulations of a generic model, we investigate heat propagation in bottle--brush polymers (BBP). An architecture is referred to as a BBP when a linear (backbone) polymer is grafted with the side chains of different length $N_{\rm s}$ and grafting density $ρ_{\rm g}$, which control the bending stiffness of a backbone. A BBP is of particular interest due to two competin…
▽ More
Using molecular dynamics (MD) simulations of a generic model, we investigate heat propagation in bottle--brush polymers (BBP). An architecture is referred to as a BBP when a linear (backbone) polymer is grafted with the side chains of different length $N_{\rm s}$ and grafting density $ρ_{\rm g}$, which control the bending stiffness of a backbone. A BBP is of particular interest due to two competing mechanics: increased backbone stiffness, via $N_{\rm s}$ and $ρ_{\rm g}$, increases the thermal transport coefficient $κ$, while the presence of side chains provides additional pathways for heat leakage. We show how a delicate competition between these two effects controls $κ$. These results reveal that going from a weakly grafting ($ρ_{\rm g} < 1$) to a highly grafting ($ρ_{\rm g} \ge 1$) regime, $κ$ changes non--monotonically that is independent of $N_{\rm s}$. The effect of side chain mass on $κ$ and heat flow in the BBP melts are also discussed.
△ Less
Submitted 3 February, 2024; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Tuning the thermal conductivity of silicon nanowires by surface passivation
Authors:
Céline Ruscher,
Robinson Cortes-Huerto,
Robert Hannebauer,
Debashish Mukherji,
Alireza Nojeh,
A. Srikantha Phani
Abstract:
Using large scale molecular dynamics simulations, we study the thermal conductivity of bare and surface passivated silicon nanowires (SiNWs). For the cross-sectional widths $w \le 2$ nm, SiNWs become unstable because of the surface amorphosization and also due to the evaporation of a certain fraction of Si atoms. The observed surface (in-)stability is related to a large excess energy $Δ$ of the su…
▽ More
Using large scale molecular dynamics simulations, we study the thermal conductivity of bare and surface passivated silicon nanowires (SiNWs). For the cross-sectional widths $w \le 2$ nm, SiNWs become unstable because of the surface amorphosization and also due to the evaporation of a certain fraction of Si atoms. The observed surface (in-)stability is related to a large excess energy $Δ$ of the surface Si atoms with respect to the bulk Si, resulting from the surface atoms being less coordinated and having dangling bonds.We first propose a practically relevant method that uses $Δ$ as a guiding tool to passivate these dangling bonds with hydrogen or oxygen, stabilizing the SiNWs. These passivated SiNWs are used to calculate the thermal conductivity coefficient $κ$.While the expected trend of $κ\propto w$ is observed for all SiNWs, surface passivation provides an added flexibility of tuning $κ$ with the surface coverage concentration $c$ of passivated atoms.Indeed, with respect to the bulk $κ$, passivation of SiNW reduces $κ$ by 75-80\% for $c \to 50\%$ and recovers again by 50\% for the fully passivated samples. Analyzing the phonon band structures via spectral energy density, we discuss separate contributions from the surface and the core to $κ$. Our results also reveal that surface passivation increases SiNW stiffness, contributing to the tunability in $κ$.
△ Less
Submitted 23 June, 2024; v1 submitted 23 April, 2023;
originally announced April 2023.
-
Stabilizing $α-$helicity of polypeptide in aqueous urea: Dipole orientation or hydrogen bonding?
Authors:
Luis A. Baptista,
Yani Zhao,
Kurt Kremer,
Debashish Mukherji,
Robinson Cortes-Huerto
Abstract:
Urea denatures proteins due to its strong tendency to dehydrate the first solvation shell via urea-residue preferential binding. However, even after extensive experimental and computational investigations, the influence of urea on the stability of secondary structures remains elusive. For example, contrary to the common understanding, experimental studies have indicated that specific polypeptides,…
▽ More
Urea denatures proteins due to its strong tendency to dehydrate the first solvation shell via urea-residue preferential binding. However, even after extensive experimental and computational investigations, the influence of urea on the stability of secondary structures remains elusive. For example, contrary to the common understanding, experimental studies have indicated that specific polypeptides, such as poly-alanine or alanine-rich systems, may even show an improved tendency to form secondary structures in aqueous urea. We investigate this seemingly counter-intuitive behaviour using over 15$μ$s long all-atom simulations. These results show how a delicate balance between the localized dipole orientations and hydrogen bonding dictates polypeptide solvation in aqueous urea. Our work establishes a structure-property relationship that highlights the importance of microscopic dipole-dipole orientations/interactions for the operational understanding of macroscopic protein solvation.
△ Less
Submitted 1 December, 2022;
originally announced December 2022.
-
Simple generic picture of toughness in solid polymer blends
Authors:
Debashish Mukherji,
Shubham Agarwal,
Tiago Espinosa de Oliveira,
Céline Ruscher,
Jörg Rottler
Abstract:
Toughness $\mathcal{T}$ of a brittle polymeric solid can be enhanced by blending another compatible and ductile polymer. While this common wisdom is generally valid, a generic picture is lacking that connects the atomistic details to the macroscopic non-linear mechanics. Using all-atom and complementary generic simulations we show how a delicate balance between the side group contact density of th…
▽ More
Toughness $\mathcal{T}$ of a brittle polymeric solid can be enhanced by blending another compatible and ductile polymer. While this common wisdom is generally valid, a generic picture is lacking that connects the atomistic details to the macroscopic non-linear mechanics. Using all-atom and complementary generic simulations we show how a delicate balance between the side group contact density of the brittle polymers $ρ_{\rm c}$ and its dilution upon adding a second component controls $\mathcal{T}$. A broad range of systems follows a universal trend in $\mathcal{T}$ with ${\rm d}ρ_{\rm c}/{\rm d}\varepsilon$, where $\varepsilon$ is the tensile strain. The simulation data is consistent with a simple model based on the parallel spring analogy.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Comparison of all atom and united atom models for thermal transport calculations of amorphous polyethylene
Authors:
James Wu,
Debashish Mukherji
Abstract:
Polymer simulations routinely employ models with different molecular resolutions. United atom (UA) models are one such example, where groups of certain atoms in a molecule are clustered into superatoms. Although their computational simplicity makes them particularly attractive for studying a wide range of polymer properties, the missing degrees of freedom in UA models can impact certain properties…
▽ More
Polymer simulations routinely employ models with different molecular resolutions. United atom (UA) models are one such example, where groups of certain atoms in a molecule are clustered into superatoms. Although their computational simplicity makes them particularly attractive for studying a wide range of polymer properties, the missing degrees of freedom in UA models can impact certain properties that are intimately linked to localized vibrations, such as the heat capacity and the thermal transport coefficient $κ$. In contrast, the numerically exhausting all atom (AA) models produce results that better match experimental data. In this work, we systematically investigate and compare $κ$ obtained from an AA and a UA models for an amorphous polyethylene system. The results indicate that the UA description may not be a suitable model for evaluating thermal transport, since it underestimates $κ$ in comparison to an AA description and the experimental value. The coarse-graining leads to the softer interactions and its presence is highlighted in a weaker mechanical response from the UA model, thus also underestimates $κ$. We further consolidate our findings by extracting the bonded and the nonbonded contributions to $κ$ within the framework of the single chain energy transfer model.
△ Less
Submitted 8 February, 2022;
originally announced February 2022.
-
Computational Indentation in Highly Cross-linked Polymer Networks
Authors:
Manoj Kumar Maurya,
Céline Ruscher,
Debashish Mukherji,
Manjesh Kumar Singh
Abstract:
Indentation is a common experimental technique to study the mechanics of polymeric materials. The main advantage of using indentation is because this provides a direct correlation between the microstructure and the small-scale mechanical response, which is otherwise difficult within the standard tensile testing. Here, majority of studies have investigated hydrogels, microgels and/or elastomers. Ho…
▽ More
Indentation is a common experimental technique to study the mechanics of polymeric materials. The main advantage of using indentation is because this provides a direct correlation between the microstructure and the small-scale mechanical response, which is otherwise difficult within the standard tensile testing. Here, majority of studies have investigated hydrogels, microgels and/or elastomers. However, a lesser investigated system is the indentation in highly cross-linked polymer (HCP) networks, where the complex network structure plays a key role in dictating their physical properties. In this work, we investigate the structure-property relationship in HCP networks using the computational indentation of a generic model. We establish a correlation between the local bond breaking, the network rearrangement, and the small-scale mechanics. The results are compared with the elastic-plastic deformation model. HCPs harden upon indentation.
△ Less
Submitted 5 May, 2022; v1 submitted 8 February, 2022;
originally announced February 2022.
-
Correlating thermodynamics, morphology, mechanics and thermal transport in PMMA-PLA blends
Authors:
Debashish Mukherji,
Tiago Espinosa de Oliveira,
Celine Ruscher,
Joerg Rottler
Abstract:
Thermodynamics controls structure, function, stability and morphology of polymer blends. However, obtaining the precise information about their mixing thermodynamics is a challenging task, especially when dealing with complex macromolecules. This is partially because of a delicate balance between the local concentration/composition fluctuations and the monomer level (multi-body) interactions. In t…
▽ More
Thermodynamics controls structure, function, stability and morphology of polymer blends. However, obtaining the precise information about their mixing thermodynamics is a challenging task, especially when dealing with complex macromolecules. This is partially because of a delicate balance between the local concentration/composition fluctuations and the monomer level (multi-body) interactions. In this context, the Kirkwood-Buff (KB) theory serves as a useful tool that connects the local pairwise fluid structure to the mixing thermodynamics. Using larger scale molecular dynamics simulations, within the framework of KB theory, we investigate a set of technologically relevant poly(methyl methacrylate)-poly(lactic acid) (PMMA-PLA) blends with the aim to elucidate the underlying microscopic picture of their phase behavior. Consistent with these experiments, we emphasize the importance of properly accounting for the entropic contribution, to the mixing Gibbs free energy change $Δ{\mathcal G}_{\rm mix}$, that controls the phase morphology. We further show how the relative microscopic interaction details and the molecular level structures between different mixing species can control the non-linear mechanics and ductility. As a direct consequence, we provide a correlation that links thermodynamics, phase behavior, mechanics, and thus also thermal transport in polymer blends. Therefore, this study provides a guiding principle for the design of light weight functional materials with extraordinary physical properties.
△ Less
Submitted 7 December, 2021; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Comparing simulated specific heat of liquid polymers and oligomers to experiments
Authors:
Hongyu Gao,
Tobias P. W. Menzel,
Martin H. Mueser,
Debashish Mukherji
Abstract:
The specific heat is a central property of condensed matter systems including polymers and oligomers in their condensed phases. Yet, predictions of this quantity from molecular simulations and successful comparisons to experimental data are scarce if existing at all. One reason for this may be that the internal energy and thus the specific heat cannot be coarse-grained so that they defy their rigo…
▽ More
The specific heat is a central property of condensed matter systems including polymers and oligomers in their condensed phases. Yet, predictions of this quantity from molecular simulations and successful comparisons to experimental data are scarce if existing at all. One reason for this may be that the internal energy and thus the specific heat cannot be coarse-grained so that they defy their rigorous computation with united-atom models. Moreover, many modes in a polymer barely contribute to the specific heat because of their quantum mechanical nature. Here, we demonstrate that an analysis of the mass-weighted velocity autocorrelation function allows specific heat predictions to be corrected for quantum effects so that agreement with experimental data is on par with predictions of other routinely computed quantities. We outline how to construct corrections for both all-atom and united-atom descriptions of chain molecules. Corrections computed for eleven hydrocarbon oligomers and commodity polymers deviate by less than $k_\textrm{B}/10$ within a subset of nine molecules. Our results may benefit the prediction of heat conductivity.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Tuning thermal transport in highly cross-linked polymers by bond induced void engineering
Authors:
Debashish Mukherji,
Manjesh Kumar Singh
Abstract:
Tuning the heat flow is fundamentally important for the design of advanced functional materials. Here, polymers are of particular importance because they provide different pathways for the energy transfer. More specifically, the heat flow between two covalently bonded monomers is over 100 times faster than between the two non-bonded monomers interacting via van der Waals (vdW) forces. Therefore, t…
▽ More
Tuning the heat flow is fundamentally important for the design of advanced functional materials. Here, polymers are of particular importance because they provide different pathways for the energy transfer. More specifically, the heat flow between two covalently bonded monomers is over 100 times faster than between the two non-bonded monomers interacting via van der Waals (vdW) forces. Therefore, the delicate balance between these two contributions often provide a guiding tool for the tunability in thermal transport coefficient k of the polymeric materials. Traditionally most studies have investigated k in the linear polymeric materials, the recent interests have also been directed towards the highly cross-linked polymers (HCP). In this work, using the generic molecular dynamics simulations we investigate the factors effecting k of HCP. We emphasize on the importance of the cross-linking bond types and its influence on the network microstructure with a goal to provide a guiding principle for the tunability in k. While these simulation results are discussed in the context of the available experimental data, we also make predictions.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Reduced thermal conductivity in molecular forests
Authors:
Aashish Bhardwaj,
A. Srikantha Phani,
Alireza Nojeh,
Debashish Mukherji
Abstract:
Heat propagation in quasi-one dimensional materials (Q1DMs) often appears paradoxical. While an isolated Q1DM, such as a nanowire, carbon nanotube, or polymer, can exhibit a high thermal conductivity \k{appa}, forests of the same materials show a reduction in \k{appa}. Here, the complex structures of these assemblies have hindered the emergence of a clear molecular picture of this intriguing pheno…
▽ More
Heat propagation in quasi-one dimensional materials (Q1DMs) often appears paradoxical. While an isolated Q1DM, such as a nanowire, carbon nanotube, or polymer, can exhibit a high thermal conductivity \k{appa}, forests of the same materials show a reduction in \k{appa}. Here, the complex structures of these assemblies have hindered the emergence of a clear molecular picture of this intriguing phenomenon. We combine multiscale (coarse-grained) simulation with the concepts known from polymer physics and thermal transport to unveil a generic (microscopic) picture of \k{appa} reduction in molecular forests. We show that a delicate balance between the bond orientations, the persistence length of the Q1DM and the flexural vibrations govern the knock-down of \k{appa}.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?
Authors:
Yani Zhao,
Manjesh K. Singh,
Kurt Kremer,
Robinson Cortes-Huerto,
Debashish Mukherji
Abstract:
The solvent quality determines the collapsed or the expanded state of a polymer. For example, a polymer dissolved in a poor solvent collapses, whereas in a good solvent it opens up. While this standard understanding is generally valid, there are examples when a polymer collapses even in a mixture of two good solvents. This phenomenon, commonly known as co-non-solvency, is usually associated with s…
▽ More
The solvent quality determines the collapsed or the expanded state of a polymer. For example, a polymer dissolved in a poor solvent collapses, whereas in a good solvent it opens up. While this standard understanding is generally valid, there are examples when a polymer collapses even in a mixture of two good solvents. This phenomenon, commonly known as co-non-solvency, is usually associated with smart polymers. Moreover, recent experiments have shown that the elastin-like polypeptides (ELPs) show co-non-solvency behavior in aqueous-ethanol mixtures. In this study, we investigate the phase behavior of ELPs in aqueous binary mixtures using molecular dynamics simulations of all-atom and complementary explicit solvent generic models. The model is parameterized by mapping the solvation free energy obtained from the all-atom simulations onto the generic interaction parameters. For this purpose, we derive segment based generic parameters for four different peptides, namely proline (P), valine (V), glycine (G) and alanine (A). Here we compare the conformational behavior of two ELP sequences, namely VPGGG and VPGVG, in aqueous-ethanol and -urea mixtures. Consistent with recent experiments, we find that ELPs show co-non-solvency in aqueous-ethanol mixtures. Ethanol molecules have preferential binding with all ELP residues and thus driving the coil-to-globule transition. On the contrary, ELP conformations show weak variation in aqueous-urea mixtures. Our simulations suggest that the glycine residues dictate the overall behavior of ELPs in aqueous-urea, where urea molecules have a rather weak preferential binding with glycine, i.e., less than kT. While the validation of the latter findings will require more detailed experimental investigation, the results presented here may provide a new twist to the present understanding of cosolvent interactions with peptides and proteins.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Elasticity and thermal transport of commodity plastics
Authors:
Celine Ruscher,
Joerg Rottler,
Charlotte Boott,
Mark J. MacLachlan,
Debashish Mukherji
Abstract:
Applications of commodity polymers are often hindered by their low thermal conductivity. In these systems, going from the standard polymers dictated by weak van der Waals interactions to biocompatible hydrogen bonded smart polymers, the thermal transport coefficient k varies between 0.1 - 0.4 W/Km. Combining all-atom molecular dynamics simulations with some experiments, we study thermal transport…
▽ More
Applications of commodity polymers are often hindered by their low thermal conductivity. In these systems, going from the standard polymers dictated by weak van der Waals interactions to biocompatible hydrogen bonded smart polymers, the thermal transport coefficient k varies between 0.1 - 0.4 W/Km. Combining all-atom molecular dynamics simulations with some experiments, we study thermal transport and its link to the elastic response of commodity plastics. We find that there exists a maximum attainable stiffness (or sound wave velocity), thus providing an upper bound of k for these solid polymers. The specific chemical structure and the glass transition temperature play no role in controlling k, especially when the microscopic interactions are hydrogen bonding based. Our results are consistent with the minimum thermal conductivity model and existing experiments. The effect of polymer stretching on k is also discussed.
△ Less
Submitted 25 November, 2019; v1 submitted 10 October, 2019;
originally announced October 2019.
-
Tuning morphology and thermal transport of asymmetric smart polymer blends by macromolecular engineering
Authors:
Daniel Bruns,
Tiago Espinosa de Oliveira,
Joerg Rottler,
Debashish Mukherji
Abstract:
A grand challenge in designing polymeric materials is to tune their properties by macromolecular engineering. In this context, one of the drawbacks that often limits broader applications under high temperature conditions is their poor thermal conductivity $κ$. Using molecular dynamics simulations, we establish a structure-property relationship in hydrogen bonded polymer blends for possible improve…
▽ More
A grand challenge in designing polymeric materials is to tune their properties by macromolecular engineering. In this context, one of the drawbacks that often limits broader applications under high temperature conditions is their poor thermal conductivity $κ$. Using molecular dynamics simulations, we establish a structure-property relationship in hydrogen bonded polymer blends for possible improvement of $κ$. For this purpose, we investigate two experimentally relevant hydrogen bonded systems -- one system consists of short poly({N}-acryloyl piperidine) (PAP) blended with longer chains of poly(acrylic acid) (PAA) and the second system is a mixture of PAA and short poly(acrylamide) (PAM) chains. Simulation results show that PAA-PAP blends are at the onset of phase separation over the full range of PAP monomer mole fraction $φ_{PAP}$, which intensifies even more for $φ_{PAP} > 0.3$. While PAA and PAP interact with preferential hydrogen bonding, phase separation is triggered by the dominant van der Waals attraction between the hydrophobic side groups of PAP. However, if PAP is replaced with PAM, which has a similar chemical structure as PAP without the hydrophobic side group, PAA-PAM blends show much improved solubility. Better solubility is due to the preferential hydrogen bonding between PAA and PAM. As a result, PAM oligomers act as cross-linking bridges between PAA chains resulting in a three dimensional highly cross-linked network. While $κ$ for PAA-PAP blends remain almost invariant with $φ_{PAP}$, PAA-PAM systems show improved $κ$ with increasing PAM concentration and also with respect to PAA-PAP blends. Consistent with the theoretical prediction for the thermal transport of amorphous polymers, we show that $κ$ is proportional to the materials stiffness, i.e., the bulk modulus K and sound velocity v of PAA-PAM blends.
△ Less
Submitted 2 July, 2019; v1 submitted 10 June, 2019;
originally announced June 2019.
-
Sequence transferable coarse-grained model of amphiphilic copolymer
Authors:
Chathuranga C. De Silva,
Porakrit Leophairatana,
Takahiro Ohkuma,
Jeffrey T. Koberstein,
Kurt Kremer,
Debashish Mukherji
Abstract:
Polymer properties are inherently multi-scale in nature, where delicate local interaction details play a key role in describing their global conformational behavior. In this context, deriving coarse-grained (CG) multi-scale models for polymeric liquids is a non-trivial task. Further complexities arise when dealing with copolymer systems with varying microscopic sequences, especially when they are…
▽ More
Polymer properties are inherently multi-scale in nature, where delicate local interaction details play a key role in describing their global conformational behavior. In this context, deriving coarse-grained (CG) multi-scale models for polymeric liquids is a non-trivial task. Further complexities arise when dealing with copolymer systems with varying microscopic sequences, especially when they are of an amphiphilic nature. In this work, we derive a segment-based generic CG model for amphiphilic copolymers consisting of repeat units of hydrophobic (methylene) and hydrophilic (ethylene oxide) monomers. The system is a simulation analogue of polyacetal copolymers [Samanta et al., Macromolecules 49, 1858 (2016)]. The CG model is found to be transferable over a wide range of copolymer sequences and also to be consistent with existing experimental data.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Depleted Depletion Drives Polymer Swelling in Poor Solvent Mixtures
Authors:
Debashish Mukherji,
Carlos M. Marques,
Torsten Stuehn,
Kurt Kremer
Abstract:
Macromolecular solubility in solvent mixtures often exhibit striking and paradoxical nature. For example, when two well miscible poor solvents for a given polymer are mixed together, the same polymer may swell within intermediate mixing ratios. We combine computer simulations and theoretical arguments to unveil the first microscopic, generic origin of this collapse-swelling-collapse scenario. We s…
▽ More
Macromolecular solubility in solvent mixtures often exhibit striking and paradoxical nature. For example, when two well miscible poor solvents for a given polymer are mixed together, the same polymer may swell within intermediate mixing ratios. We combine computer simulations and theoretical arguments to unveil the first microscopic, generic origin of this collapse-swelling-collapse scenario. We show that this phenomenon naturally emerges at constant pressure in mixtures of purely repulsive components, especially when a delicate balance of the entropically driven depletion interactions is achieved.
△ Less
Submitted 30 September, 2016;
originally announced September 2016.
-
$\mathcal {C}-$IBI: Targeting cumulative coordination within an iterative protocol to derive coarse-grained models of (multi-component) complex fluids
Authors:
Tiago E. de Oliveira,
Paulo A. Netz,
Kurt Kremer,
Christoph Junghans,
Debashish Mukherji
Abstract:
We present a coarse-graining strategy that we test for aqueous mixtures. The method uses pair-wise cumulative coordination as a target function within an iterative Boltzmann inversion (IBI) like protocol. We name this method coordination iterative Boltzmann inversion ($\mathcal {C}-$IBI). While the underlying coarse-grained model is still structure based and, thus, preserves pair-wise solution str…
▽ More
We present a coarse-graining strategy that we test for aqueous mixtures. The method uses pair-wise cumulative coordination as a target function within an iterative Boltzmann inversion (IBI) like protocol. We name this method coordination iterative Boltzmann inversion ($\mathcal {C}-$IBI). While the underlying coarse-grained model is still structure based and, thus, preserves pair-wise solution structure, our method also reproduces solvation thermodynamics of binary and/or ternary mixtures. Additionally, we observe much faster convergence within $\mathcal {C}-$IBI compared to IBI. To validate the robustness, we apply $\mathcal {C}-$IBI to study test cases of solvation thermodynamics of aqueous urea and a triglycine solvation in aqueous urea.
△ Less
Submitted 19 June, 2016; v1 submitted 29 March, 2016;
originally announced March 2016.
-
Why does high pressure destroy co-non-solvency of PNIPAm in aqueous methanol?
Authors:
Tiago E. de Oliveira,
Paulo A. Netz,
Debashish Mukherji,
Kurt Kremer
Abstract:
It is well known that poly(N-isopropylacrylamide) (PNIPAm) exhibits an interesting, yet puzzling, phenomenon of co-non-solvency. Co-non-solvency occurs when two competing good solvents for PNIPAm, such as water and alcohol, are mixed together. As a result, the same PNIPAm collapses within intermediate mixing ratios. This complex conformational transition is driven by preferential binding of methan…
▽ More
It is well known that poly(N-isopropylacrylamide) (PNIPAm) exhibits an interesting, yet puzzling, phenomenon of co-non-solvency. Co-non-solvency occurs when two competing good solvents for PNIPAm, such as water and alcohol, are mixed together. As a result, the same PNIPAm collapses within intermediate mixing ratios. This complex conformational transition is driven by preferential binding of methanol with PNIPAm. Interestingly, co-non-solvency can be destroyed when applying high hydrostatic pressures. In this work, using a large scale molecular dynamics simulation employing high pressures, we propose a microscopic picture behind the suppression of the co-non-solvency phenomenon. Based on thermodynamic and structural analysis, our results suggest that the preferential binding of methanol with PNIPAm gets partially lost at high pressures, making the background fluid reasonably homogeneous for the polymer. This is consistent with the hypothesis that the co-non-solvency phenomenon is driven by preferential binding and is not based on depletion effects.
△ Less
Submitted 16 January, 2016;
originally announced January 2016.
-
Shear melting and high temperature embrittlement: theory and application to machining titanium
Authors:
Con Healy,
Sascha Koch,
Carsten Siemers,
Debashis Mukherji,
Graeme J Ackland
Abstract:
We describe a dynamical phase transition occurring within a shear band at high temperature and under extremely high shear rates. With increasing temperature, dislocation deformation and grain boundary sliding is supplanted by amorphization in a highly localized nanoscale band, which allows massive strain and fracture. The mechanism is similar to shear melting and leads to liquid metal embrittlemen…
▽ More
We describe a dynamical phase transition occurring within a shear band at high temperature and under extremely high shear rates. With increasing temperature, dislocation deformation and grain boundary sliding is supplanted by amorphization in a highly localized nanoscale band, which allows massive strain and fracture. The mechanism is similar to shear melting and leads to liquid metal embrittlement at high temperature. From simulation, we find that the necessary conditions are, lack of dislocation slip systems, low thermal conduction and temperature near the melting point. The first two are exhibited by bcc titanium alloys, and we show that the final one can be achieved experimentally by adding low-melting point elements: specifically we use insoluble rare earth metals (REMs). Under high shear, the REM becomes mixed with the titanium, lowering the melting point within the shear band and triggering the shear-melting transition. This in turn generates heat which remains localized in the shear band due to poor heat conduction. The material fractures along the shear band. We show how to utilize this transition in the creation of new titanium-based alloys with improved machinability.
△ Less
Submitted 30 March, 2015;
originally announced March 2015.
-
Co-non-solvency: Mean-field polymer theory does not describe polymer collapse transition in a mixture of two competing good solvents
Authors:
Debashish Mukherji,
Carlos M. Marques,
Torsten Stuehn,
Kurt Kremer
Abstract:
Smart polymers are a modern class of polymeric materials that often exhibit unpredictable behavior in mixtures of solvents. One such phenomenon is co-non-solvency. Co-non-solvency occurs when two (perfectly) miscible and competing good solvents, for a given polymer, are mixed together. As a result, the same polymer collapses into a compact globule within intermediate mixing ratios. More interestin…
▽ More
Smart polymers are a modern class of polymeric materials that often exhibit unpredictable behavior in mixtures of solvents. One such phenomenon is co-non-solvency. Co-non-solvency occurs when two (perfectly) miscible and competing good solvents, for a given polymer, are mixed together. As a result, the same polymer collapses into a compact globule within intermediate mixing ratios. More interestingly, polymer collapses when the solvent quality remains good and even gets increasingly better by the addition of the better cosolvent. This is a puzzling phenomenon that is driven by strong local concentration fluctuations. Because of the discrete particle based nature of the interactions, Flory-Huggins type mean field arguments become unsuitable. In this work, we extend the analysis of the co-non-solvency effect presented earlier [Nature Communications 5, 4882 (2014)]. We explain why co-non-solvency is a generic phenomenon that can be understood by the thermodynamic treatment of the competitive displacement of (co)solvent components. This competition can result in a polymer collapse upon improvement of the solvent quality. Specific chemical details are not required to understand these complex conformational transitions. Therefore, a broad range of polymers are expected to exhibit similar reentrant coil-globule-coil transitions in competing good solvents.
△ Less
Submitted 2 February, 2015;
originally announced February 2015.
-
Unexpected crossover dynamics of single polymer in a corrugated tube
Authors:
A. De Virgiliis,
L. Kuban,
J. Paturej,
D. Mukherji
Abstract:
We present molecular dynamics study of a generic (coarse-grained) model for single-polymer diffusion confined in a corrugated cylinder. For a narrow tube, i.e., diameter of the cylinder $δ< 2.3$, the axial diffusion coefficient $D_{||}$ scales as $D_{||} \propto N^{-3/2}$, with chain length $N$, up to $N \approx 100$ then crosses over to Rouse scaling for the larger $N$ values. The $N^{-3/2}$ scal…
▽ More
We present molecular dynamics study of a generic (coarse-grained) model for single-polymer diffusion confined in a corrugated cylinder. For a narrow tube, i.e., diameter of the cylinder $δ< 2.3$, the axial diffusion coefficient $D_{||}$ scales as $D_{||} \propto N^{-3/2}$, with chain length $N$, up to $N \approx 100$ then crosses over to Rouse scaling for the larger $N$ values. The $N^{-3/2}$ scaling is due to the large fluctuation of the polymer chain along its fully stretched equilibrium conformation. The stronger scaling, namely $N^{-3/2}$, is not observed for an atomistically smooth tube and/or for a cylinder with larger diameter.
△ Less
Submitted 3 September, 2012;
originally announced September 2012.
