-
Multi-state detection and spatial addressing in a microscope for ultracold molecules
Authors:
Jonathan M. Mortlock,
Adarsh P. Raghuram,
Benjamin P. Maddox,
Philip D. Gregory,
Simon L. Cornish
Abstract:
Precise measurement of the particle number, spatial distribution and internal state is fundamental to all proposed experiments with ultracold molecules both in bulk gases and optical lattices. Here, we demonstrate in-situ detection of individual molecules in a bulk sample of 87Rb133Cs molecules. Extending techniques from atomic quantum gas microscopy, we pin the molecules in a deep two-dimensional…
▽ More
Precise measurement of the particle number, spatial distribution and internal state is fundamental to all proposed experiments with ultracold molecules both in bulk gases and optical lattices. Here, we demonstrate in-situ detection of individual molecules in a bulk sample of 87Rb133Cs molecules. Extending techniques from atomic quantum gas microscopy, we pin the molecules in a deep two-dimensional optical lattice and, following dissociation, collect fluorescence from the constituent atoms using a high-numerical-aperture objective. This enables detection of individual molecules up to the resolution of the sub-micron lattice spacing. Our approach provides direct access to the density distribution of small samples of molecules, allowing us to obtain precise measurements of density-dependent collisional losses. Further, by mapping two internal states of the molecule to different atomic species, we demonstrate simultaneous detection of the position and rotational state of individual molecules. Finally, we implement local addressing of the sample using a focused beam to induce a spatially-dependent light shift on the rotational transitions of the molecules.
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Enhanced quantum state transfer via feedforward cancellation of optical phase noise
Authors:
Benjamin P. Maddox,
Jonathan M. Mortlock,
Tom R. Hepworth,
Adarsh P. Raghuram,
Philip D. Gregory,
Alexander Guttridge,
Simon L. Cornish
Abstract:
Many experimental platforms for quantum science depend on state control via laser fields. Frequently, however, the control fidelity is limited by optical phase noise. This is exacerbated in stabilized laser systems where high-frequency phase noise is an unavoidable consequence of feedback. Here we implement an optical feedforward technique to suppress laser phase noise in the STIRAP state transfer…
▽ More
Many experimental platforms for quantum science depend on state control via laser fields. Frequently, however, the control fidelity is limited by optical phase noise. This is exacerbated in stabilized laser systems where high-frequency phase noise is an unavoidable consequence of feedback. Here we implement an optical feedforward technique to suppress laser phase noise in the STIRAP state transfer of ultracold RbCs molecules, across 114 THz, from a weakly bound Feshbach state to the rovibrational ground state. By performing over 100 state transfers on single molecules, we measure a significantly enhanced transfer efficiency of 98.7(1)% limited only by available laser intensity.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Long distance optical conveyor-belt transport of ultracold $^{133}$Cs and $^{87}$Rb atoms
Authors:
Alex J. Matthies,
Jonathan M. Mortlock,
Lewis A. McArd,
Adarsh P. Raghuram,
Andrew D. Innes,
Philip D. Gregory,
Sarah L. Bromley,
Simon L. Cornish
Abstract:
We report on the transport of ultracold cesium and rubidium atoms over $37.2\,$cm in under $25\,$ms using an optical conveyor belt formed by two counter-propagating beams with a controllable frequency difference that generate a movable optical lattice. By carefully selecting the waists and focus positions, we are able to use two static Gaussian beams for the transport, avoiding the need for a Bess…
▽ More
We report on the transport of ultracold cesium and rubidium atoms over $37.2\,$cm in under $25\,$ms using an optical conveyor belt formed by two counter-propagating beams with a controllable frequency difference that generate a movable optical lattice. By carefully selecting the waists and focus positions, we are able to use two static Gaussian beams for the transport, avoiding the need for a Bessel beam or vari-focus lenses. We characterize the transport efficiency for both species, including a comparison of different transport trajectories, gaining insight into the loss mechanisms and finding the minimum jerk trajectory to be optimum. Using the optimized parameters, we are able to transport up to $7 \times 10^6$ cesium or rubidium atoms with an efficiency up to $75\,$%. To demonstrate the viability of our transport scheme for experiments employing quantum gas microscopy, we produce Bose-Einstein condensates of either species after transport and present measurements of the simultaneous transport of both species.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
A motorized rotation mount for fast and reproducible optical polarization control
Authors:
Adarsh P. Raghuram,
Jonathan M. Mortlock,
Sarah L. Bromley,
Simon L. Cornish
Abstract:
We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimising inertia and mec…
▽ More
We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimising inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterise the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beamsplitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms, and a rotational resolution of 0.45 degrees. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 hours.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Measurement of the tune-out wavelength for $^{133}$Cs at $880$ nm
Authors:
Apichayaporn Ratkata,
Philip D. Gregory,
Andrew D. Innes,
Jonas A. Matthies,
Lewis A. McArd,
Jonathan M. Mortlock,
M. S. Safronova,
Sarah L. Bromley,
Simon L. Cornish
Abstract:
We perform a measurement of the tune-out wavelength, $λ_{0}$, between the $D_{1}$, $6^2S_{1/2}\rightarrow6^2P_{1/2}$, and $D_{2}$, $6^2S_{1/2}\rightarrow6^2P_{3/2}$, transitions for $^{133}$Cs in the ground hyperfine state $(F=3, m_{F}=+3)$. At $λ_{0}$, the frequency-dependent scalar polarizability is zero leading to a zero scalar ac Stark shift. We measure the polarizability as a function of wave…
▽ More
We perform a measurement of the tune-out wavelength, $λ_{0}$, between the $D_{1}$, $6^2S_{1/2}\rightarrow6^2P_{1/2}$, and $D_{2}$, $6^2S_{1/2}\rightarrow6^2P_{3/2}$, transitions for $^{133}$Cs in the ground hyperfine state $(F=3, m_{F}=+3)$. At $λ_{0}$, the frequency-dependent scalar polarizability is zero leading to a zero scalar ac Stark shift. We measure the polarizability as a function of wavelength using Kapitza-Dirac scattering of a $^{133}$Cs Bose-Einstein condensate in a one-dimensional optical lattice, and determine the tune-out wavelength to be $λ_{0}=880.21790(40)_{\textrm{stat}}(8)_{\textrm{sys}}$ nm. From this measurement we determine the ratio of reduced matrix elements to be $\left|\left<{6P_{3/2}\| d\|6S_{1/2}}\right>\right|^{2}\left|\left<{6P_{1/2}\| d\|6S_{1/2}}\right>\right|^{2}=1.9808(2)$. This represents an improvement of a factor of 10 over previous results derived from excited-state lifetime measurements. We use the present measurement as a benchmark test of high-precision theory.
△ Less
Submitted 30 September, 2021;
originally announced October 2021.
