-
Sensing high-frequency AC fields via a two-qubit probe
Authors:
Rizwan Abbas,
Ali Raza Mirza,
Adam Zaman Chaudhry
Abstract:
Quantum sensors allow us to measure weak oscillating fields with incredible precision. One common approach is to use the time evolution of a single two-level system in conjunction with applied control pulses to measure the oscillating field. For high-frequency fields, the time interval required between the applied pulses decreases, meaning that errors due to the finite width of the pulses can beco…
▽ More
Quantum sensors allow us to measure weak oscillating fields with incredible precision. One common approach is to use the time evolution of a single two-level system in conjunction with applied control pulses to measure the oscillating field. For high-frequency fields, the time interval required between the applied pulses decreases, meaning that errors due to the finite width of the pulses can become important. This paper presents an alternative scheme that does not rely on applying pulses with short time intervals. Our scheme uses two interacting two-level systems. In the presence of an oscillating field, the interaction strength changes. The oscillating field can be estimated by measuring the change in this interaction strength. We quantify the precision of this estimate by calculating the Fisher information. We show the effect of noise on our scheme and discuss how control pulses can be applied to mitigate the impact of noise. Importantly, the time interval between these pulses need not be very short.
△ Less
Submitted 26 May, 2025;
originally announced May 2025.
-
AC nuclear Stark effect in H-atom via super-intense laser-atom interaction
Authors:
Ali Raza Mirza,
Rizwan Abbas,
Atif Shahbaz
Abstract:
We investigate the nuclear Stark effect induced in hydrogen-like atomic nuclei under super-intense laser fields. Since laser wavelengths are generally larger than nuclear dimensions, direct laser-nucleus interaction is unfeasible. Instead, this effect is induced indirectly through electron oscillations in the laser field, which produce a periodic electric field that shifts the nuclear energy level…
▽ More
We investigate the nuclear Stark effect induced in hydrogen-like atomic nuclei under super-intense laser fields. Since laser wavelengths are generally larger than nuclear dimensions, direct laser-nucleus interaction is unfeasible. Instead, this effect is induced indirectly through electron oscillations in the laser field, which produce a periodic electric field that shifts the nuclear energy levels. Using perturbation theory, we derive an expression for the energy shift and dynamic polarizability of the nucleus as a function of laser parameters. Our findings reveal that the Nuclear Stark effect can be controlled by adjusting the laser frequency and intensity, potentially enabling applications in nuclear and quantum optical systems.
△ Less
Submitted 18 February, 2025;
originally announced February 2025.
-
The effect of non-selective measurement on the parameter estimation within spin-spin model
Authors:
Ali Raza Mirza,
Jim Al-Khalili
Abstract:
We investigate the role of non-selective measurement on the estimation of system-environment parameters. Projective measurement is the popular method of initial state preparation which always prepares a pure state. However, in various physical situations of physical interest, this selective measurement becomes unrealistic. In this paper, we compare the estimation results obtained via projective me…
▽ More
We investigate the role of non-selective measurement on the estimation of system-environment parameters. Projective measurement is the popular method of initial state preparation which always prepares a pure state. However, in various physical situations of physical interest, this selective measurement becomes unrealistic. In this paper, we compare the estimation results obtained via projective measurement with the results obtained via unitary operation. We argue that in typical situations, parameters can be estimated with higher accuracy if the initial state is prepared with the unitary operator (a pulse). We consider the spin-spin model where a central two-level system (probe) interacts with the collections of two-level systems (bath). A probe interacts with a bath and attains a thermal equilibrium state, then via unitary operation, the initial state is prepared which evolves unitarily. The properties of the bath are imprinted on the reduced dynamics. Due to the initial probe-bath correlations present in the thermal equilibrium state, an additional factor arises in the dynamics which has a phenomenal role in the parameter estimation. In this paper, we study the estimation of bath temperature and probe-bath coupling strength which is quantified by the quantum Fisher information. Our results are promising as one can improve the precision of the estimates by orders of magnitude via non-selective measurement and by incorporating the effect of initial correlations.
△ Less
Submitted 13 September, 2024;
originally announced September 2024.
-
The role of initial system-environment correlations in the accuracies of parameters within spin-spin model
Authors:
Ali Raza Mirza,
Jim Al-Khalili
Abstract:
We investigate the effect of initial system-environment correlations to improve the estimation of environment parameters. By employing various physical situations of interest, we present results for the environment temperature and system-environment coupling strength. We consider the spin-spin model whereby a probe (a small controllable quantum system) interacts with a bath of quantum spins and at…
▽ More
We investigate the effect of initial system-environment correlations to improve the estimation of environment parameters. By employing various physical situations of interest, we present results for the environment temperature and system-environment coupling strength. We consider the spin-spin model whereby a probe (a small controllable quantum system) interacts with a bath of quantum spins and attains a thermal equilibrium state. A projective measurement is then performed to prepare the initial state and allow it to evolve unitarily. The properties of the environment are imprinted upon the dynamics of the probe. The reduced density matrix of the probe state contains a modified decoherence factor and dissipation. This additional factor acts in such a way to improve the estimation of the environment parameters, as quantified by the quantum Fisher information (QFI). In the temperature estimation case, our results are promising as one can improve the precision of the estimates by orders of magnitude by incorporating the effect of initial correlations. The precision increases in the strong coupling regime even if the nearest neighbours' interaction is taken into account. In the case of coupling strength, interestingly the accuracy was found to be continuously increasing in both with and without correlations cases. More importantly, one can see the noticeable role of correlations in improving precision, especially at low temperatures.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. Al Kadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola,
R. B. Amir
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 18 December, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Improving the understanding of the dynamics of open quantum systems
Authors:
Ali Raza Mirza
Abstract:
This thesis presents studies performed on open quantum systems, that is, quantum systems interacting with their surrounding environment. Such systems are important not only in understanding the quantum-to-classical transition but also for the practical implementation of modern quantum technologies. In studies of open quantum systems performed to date, a very common assumption is that the system an…
▽ More
This thesis presents studies performed on open quantum systems, that is, quantum systems interacting with their surrounding environment. Such systems are important not only in understanding the quantum-to-classical transition but also for the practical implementation of modern quantum technologies. In studies of open quantum systems performed to date, a very common assumption is that the system and the environment are in separated initial states to begin with. One primary objective of this thesis is to critically analyse this assumption. We follow two different approaches to investigate the dynamics. First, we solve an exactly solvable spin-spin model where a central spin system interacts with a collection of quantum spins. We analyse exactly the central spin dynamics, starting from both initially correlated and uncorrelated SE states, and look at the dynamical differences due to the different starting states. Second, we consider an arbitrary system interacting with an arbitrary environment and derive a master equation that describes the system dynamics and incorporates the effect of the initial SE correlations. This effect of initial correlations is captured by an extra term appearing in the master equation. The master equation is subsequently applied to the paradigmatic SE models such as the spin-boson model and the spin-spin model. We demonstrate that the role played by initial correlations can be noticeable even if the SE coupling strength is kept smaller. The next part of the thesis deals with estimating the parameters characterizing the environment of a quantum system where we show that the use of two two-level systems can greatly enhance the estimation of the environment parameters.
△ Less
Submitted 24 December, 2023;
originally announced February 2024.
-
Disentangling Extraction and Reasoning in Multi-hop Spatial Reasoning
Authors:
Roshanak Mirzaee,
Parisa Kordjamshidi
Abstract:
Spatial reasoning over text is challenging as the models not only need to extract the direct spatial information from the text but also reason over those and infer implicit spatial relations. Recent studies highlight the struggles even large language models encounter when it comes to performing spatial reasoning over text. In this paper, we explore the potential benefits of disentangling the proce…
▽ More
Spatial reasoning over text is challenging as the models not only need to extract the direct spatial information from the text but also reason over those and infer implicit spatial relations. Recent studies highlight the struggles even large language models encounter when it comes to performing spatial reasoning over text. In this paper, we explore the potential benefits of disentangling the processes of information extraction and reasoning in models to address this challenge. To explore this, we design various models that disentangle extraction and reasoning(either symbolic or neural) and compare them with state-of-the-art(SOTA) baselines with no explicit design for these parts. Our experimental results consistently demonstrate the efficacy of disentangling, showcasing its ability to enhance models' generalizability within realistic data domains.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Improving the estimation of the environment parameters via a two-qubit scheme
Authors:
Ali Raza Mirza,
Adam Zaman Chaudhry
Abstract:
We demonstrate how using two qubits can drastically improve the estimation of environment parameters as compared to using only a single qubit. The two qubits are coupled to a common harmonic oscillatorenvironment, and the properties of the environment are imprinted upon the dynamics of the two qubits. The reduced density matrix of only one of these qubits contains a decoherence factor as well as a…
▽ More
We demonstrate how using two qubits can drastically improve the estimation of environment parameters as compared to using only a single qubit. The two qubits are coupled to a common harmonic oscillatorenvironment, and the properties of the environment are imprinted upon the dynamics of the two qubits. The reduced density matrix of only one of these qubits contains a decoherence factor as well as an additional factor taking into account the indirect interaction induced between the qubits due to the interaction with their common environment. This additional factor can drastically improve the estimation of the environment parameters, as quantified by the quantum Fisher information. In particular, we investigate the estimation of the cutoff frequency, the coupling strength, and the temperature using our two-qubit scheme as compared to simply using a single qubit. For super-Ohmic environments in particular, one can improve the precision of the estimates by orders of magnitude.
△ Less
Submitted 20 May, 2023;
originally announced May 2023.
-
GLUECons: A Generic Benchmark for Learning Under Constraints
Authors:
Hossein Rajaby Faghihi,
Aliakbar Nafar,
Chen Zheng,
Roshanak Mirzaee,
Yue Zhang,
Andrzej Uszok,
Alexander Wan,
Tanawan Premsri,
Dan Roth,
Parisa Kordjamshidi
Abstract:
Recent research has shown that integrating domain knowledge into deep learning architectures is effective -- it helps reduce the amount of required data, improves the accuracy of the models' decisions, and improves the interpretability of models. However, the research community is missing a convened benchmark for systematically evaluating knowledge integration methods. In this work, we create a be…
▽ More
Recent research has shown that integrating domain knowledge into deep learning architectures is effective -- it helps reduce the amount of required data, improves the accuracy of the models' decisions, and improves the interpretability of models. However, the research community is missing a convened benchmark for systematically evaluating knowledge integration methods. In this work, we create a benchmark that is a collection of nine tasks in the domains of natural language processing and computer vision. In all cases, we model external knowledge as constraints, specify the sources of the constraints for each task, and implement various models that use these constraints. We report the results of these models using a new set of extended evaluation criteria in addition to the task performances for a more in-depth analysis. This effort provides a framework for a more comprehensive and systematic comparison of constraint integration techniques and for identifying related research challenges. It will facilitate further research for alleviating some problems of state-of-the-art neural models.
△ Less
Submitted 16 February, 2023;
originally announced February 2023.
-
The role of initial system-environment correlations with a spin environment
Authors:
Ali Raza Mirza,
Mah Noor Jamil,
Adam Zaman Chaudhry
Abstract:
Open quantum systems are a subject of immense interest as their understanding is crucial in the implementation of modern quantum technologies. In the study of their dynamics, the role of the initial system-environment correlations is commonly ignored. In this work, to gain insights into the role of these correlations, we solve an exactly solvable model of a single two-level system interacting with…
▽ More
Open quantum systems are a subject of immense interest as their understanding is crucial in the implementation of modern quantum technologies. In the study of their dynamics, the role of the initial system-environment correlations is commonly ignored. In this work, to gain insights into the role of these correlations, we solve an exactly solvable model of a single two-level system interacting with a spin environment, with the initial system state prepared by a suitable unitary operation. By solving the dynamics exactly for arbitrary system-environment coupling strength while taking into account the initial system-environment correlations, we show that the effect of the initial correlations is, in general, very significant and non-trivial. To further highlight the importance of the initial system-environment correlations, we also extend our study to investigate the dynamics of the entanglement between two two-level systems interacting with a common spin environment.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Transfer Learning with Synthetic Corpora for Spatial Role Labeling and Reasoning
Authors:
Roshanak Mirzaee,
Parisa Kordjamshidi
Abstract:
Recent research shows synthetic data as a source of supervision helps pretrained language models (PLM) transfer learning to new target tasks/domains. However, this idea is less explored for spatial language. We provide two new data resources on multiple spatial language processing tasks. The first dataset is synthesized for transfer learning on spatial question answering (SQA) and spatial role lab…
▽ More
Recent research shows synthetic data as a source of supervision helps pretrained language models (PLM) transfer learning to new target tasks/domains. However, this idea is less explored for spatial language. We provide two new data resources on multiple spatial language processing tasks. The first dataset is synthesized for transfer learning on spatial question answering (SQA) and spatial role labeling (SpRL). Compared to previous SQA datasets, we include a larger variety of spatial relation types and spatial expressions. Our data generation process is easily extendable with new spatial expression lexicons. The second one is a real-world SQA dataset with human-generated questions built on an existing corpus with SPRL annotations. This dataset can be used to evaluate spatial language processing models in realistic situations. We show pretraining with automatically generated data significantly improves the SOTA results on several SQA and SPRL benchmarks, particularly when the training data in the target domain is small.
△ Less
Submitted 3 November, 2022; v1 submitted 30 October, 2022;
originally announced October 2022.
-
Comprehensive Survey of Ternary Full Adders: Statistics, Corrections, and Assessments
Authors:
Sarina Nemati,
Mostafa Haghi Kashani,
Reza Faghih Mirzaee
Abstract:
The history of ternary adders goes back to more than six decades ago. Since then, a multitude of ternary full adders (TFAs) have been presented in the literature. This paper conducts a review of TFAs so that one can be familiar with the utilized design methodologies and their prevalence. Moreover, despite numerous TFAs, almost none of them are in their simplest form. A large number of transistors…
▽ More
The history of ternary adders goes back to more than six decades ago. Since then, a multitude of ternary full adders (TFAs) have been presented in the literature. This paper conducts a review of TFAs so that one can be familiar with the utilized design methodologies and their prevalence. Moreover, despite numerous TFAs, almost none of them are in their simplest form. A large number of transistors could have been eliminated by considering a partial TFA instead of a complete one. According to our investigation, only 28.6% of the previous designs are partial TFAs. Also, they could have been simplified even further by assuming a partial TFA with an output carry voltage of 0V or VDD. This way, in a single-VDD design, voltage division inside the Carry generator part would have been eliminated and less power dissipated. As far as we have searched, there are only three partial TFAs with this favorable condition in the literature. Additionally, most of the simulation setups in the previous articles are not realistic enough. Therefore, the simulation results reported in these papers are neither comparable nor entirely valid. Therefore, we got motivated to conduct a survey, elaborate on this issue, and enhance some of the previous designs. Among 84 papers, 10 different TFAs (from 11 papers) are selected, simplified, and simulated in this paper. Simulation results by HSPICE and 32nm CNFET technology reveal that the simplified partial TFAs outperform their original versions in terms of delay, power, and transistor count.
△ Less
Submitted 26 July, 2023; v1 submitted 3 June, 2022;
originally announced June 2022.
-
Generalizable Neuro-symbolic Systems for Commonsense Question Answering
Authors:
Alessandro Oltramari,
Jonathan Francis,
Filip Ilievski,
Kaixin Ma,
Roshanak Mirzaee
Abstract:
This chapter illustrates how suitable neuro-symbolic models for language understanding can enable domain generalizability and robustness in downstream tasks. Different methods for integrating neural language models and knowledge graphs are discussed. The situations in which this combination is most appropriate are characterized, including quantitative evaluation and qualitative error analysis on a…
▽ More
This chapter illustrates how suitable neuro-symbolic models for language understanding can enable domain generalizability and robustness in downstream tasks. Different methods for integrating neural language models and knowledge graphs are discussed. The situations in which this combination is most appropriate are characterized, including quantitative evaluation and qualitative error analysis on a variety of commonsense question answering benchmark datasets.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Ultra-Fast, High-Performance 8x8 Approximate Multipliers by a New Multicolumn 3,3:2 Inexact Compressor and its Derivatives
Authors:
Fereshteh Karimi,
Reza Faghih Mirzaee,
Ali Fakeri-Tabrizi,
Arman Roohi
Abstract:
A multiplier, as a key component in many different applications, is a time-consuming, energy-intensive computation block. Approximate computing is a practical design paradigm that attempts to improve hardware efficacy while keeping computation quality satisfactory. A novel multicolumn 3,3:2 inexact compressor is presented in this paper. It takes three partial products from two adjacent columns eac…
▽ More
A multiplier, as a key component in many different applications, is a time-consuming, energy-intensive computation block. Approximate computing is a practical design paradigm that attempts to improve hardware efficacy while keeping computation quality satisfactory. A novel multicolumn 3,3:2 inexact compressor is presented in this paper. It takes three partial products from two adjacent columns each for rapid partial product reduction. The proposed inexact compressor and its derivates enable us to design a high-speed approximate multiplier. Then, another ultra-fast, high-efficient approximate multiplier is achieved utilizing a systematic truncation strategy. The proposed multipliers accumulate partial products in only two stages, one fewer stage than other approximate multipliers in the literature. Implementation results by Synopsys Design Compiler and 45 nm technology node demonstrates nearly 11.11% higher speed for the second proposed design over the fastest existing approximate multiplier. Furthermore, the new approximate multipliers are applied to the image processing application of image sharpening, and their performance in this application is highly satisfactory. It is shown in this paper that the error pattern of an approximate multiplier, in addition to the mean error distance and error rate, has a direct effect on the outcomes of the image processing application.
△ Less
Submitted 15 August, 2023; v1 submitted 25 July, 2021;
originally announced July 2021.
-
SpartQA: : A Textual Question Answering Benchmark for Spatial Reasoning
Authors:
Roshanak Mirzaee,
Hossein Rajaby Faghihi,
Qiang Ning,
Parisa Kordjmashidi
Abstract:
This paper proposes a question-answering (QA) benchmark for spatial reasoning on natural language text which contains more realistic spatial phenomena not covered by prior work and is challenging for state-of-the-art language models (LM). We propose a distant supervision method to improve on this task. Specifically, we design grammar and reasoning rules to automatically generate a spatial descript…
▽ More
This paper proposes a question-answering (QA) benchmark for spatial reasoning on natural language text which contains more realistic spatial phenomena not covered by prior work and is challenging for state-of-the-art language models (LM). We propose a distant supervision method to improve on this task. Specifically, we design grammar and reasoning rules to automatically generate a spatial description of visual scenes and corresponding QA pairs. Experiments show that further pretraining LMs on these automatically generated data significantly improves LMs' capability on spatial understanding, which in turn helps to better solve two external datasets, bAbI, and boolQ. We hope that this work can foster investigations into more sophisticated models for spatial reasoning over text.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Latent Alignment of Procedural Concepts in Multimodal Recipes
Authors:
Hossein Rajaby Faghihi,
Roshanak Mirzaee,
Sudarshan Paliwal,
Parisa Kordjamshidi
Abstract:
We propose a novel alignment mechanism to deal with procedural reasoning on a newly released multimodal QA dataset, named RecipeQA. Our model is solving the textual cloze task which is a reading comprehension on a recipe containing images and instructions. We exploit the power of attention networks, cross-modal representations, and a latent alignment space between instructions and candidate answer…
▽ More
We propose a novel alignment mechanism to deal with procedural reasoning on a newly released multimodal QA dataset, named RecipeQA. Our model is solving the textual cloze task which is a reading comprehension on a recipe containing images and instructions. We exploit the power of attention networks, cross-modal representations, and a latent alignment space between instructions and candidate answers to solve the problem. We introduce constrained max-pooling which refines the max-pooling operation on the alignment matrix to impose disjoint constraints among the outputs of the model. Our evaluation result indicates a 19\% improvement over the baselines.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
A master equation incorporating the system-environment correlations present in the joint equilibrium state
Authors:
Ali Raza Mirza,
Muhammad Zia,
Adam Zaman Chaudhry
Abstract:
We present a general master equation, correct to second order in the system-environment coupling strength, that takes into account the initial system-environment correlations. We assume that the system and its environment are in a joint thermal equilibrium state, and thereafter a unitary operation is performed to prepare the desired initial system state, with the system Hamiltonian possibly changi…
▽ More
We present a general master equation, correct to second order in the system-environment coupling strength, that takes into account the initial system-environment correlations. We assume that the system and its environment are in a joint thermal equilibrium state, and thereafter a unitary operation is performed to prepare the desired initial system state, with the system Hamiltonian possibly changing thereafter as well. We show that the effect of the initial correlations shows up in the second-order master equation as an additional term, similar in form to the usual second-order term describing relaxation and decoherence in quantum systems. We apply this master equation to a generalization of the paradigmatic spin-boson model, namely a collection of two-level systems interacting with a common environment of harmonic oscillators, as well as a collection of two-level systems interacting with a common spin environment. We demonstrate that, in general, the initial system-environment correlations need to be accounted for in order to accurately obtain the system dynamics.
△ Less
Submitted 1 March, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
MIPS-Core Application Specific Instruction-Set Processor for IDEA Cryptography - Comparison between Single-Cycle and Multi-Cycle Architectures
Authors:
Ahmad Ahmadi,
Reza Faghih Mirzaee
Abstract:
A single-cycle processor completes the execution of an instruction in only one clock cycle. However, its clock period is usually rather long. On the contrary, although clock frequency is higher in a multi-cycle processor, it takes several clock cycles to finish an instruction. Therefore, their runtime efficiencies depend on which program is executed. This paper presents a new processor for Interna…
▽ More
A single-cycle processor completes the execution of an instruction in only one clock cycle. However, its clock period is usually rather long. On the contrary, although clock frequency is higher in a multi-cycle processor, it takes several clock cycles to finish an instruction. Therefore, their runtime efficiencies depend on which program is executed. This paper presents a new processor for International Data Encryption Algorithm (IDEA) cryptography. The new design is an Application Specific Instruction-set Processor (ASIP) in which both general-purpose and special instructions are supported. It is a single-cycle MIPS-core architecture, whose average Clocks Per Instruction (CPI) is 1. Furthermore, a comparison is provided in this paper to show the differences between the proposed single-cycle processor and another comparable multi-cycle crypto processor. FPGA implementation results show that both architectures have almost the same encoding/decoding throughput. However, the previous processor consumes nearly twice as many resources as the new one does.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
Applicability of Partial Ternary Full Adder in Ternary Arithmetic Units
Authors:
Aida Ghorbani Asibelagh,
Reza Faghih Mirzaee
Abstract:
This paper explores whether or not a complete ternary full adder, whose input variables can independently be '0', '1', or '2', is indispensable in the arithmetic blocks of adder, subtractor, and multiplier. Our investigations show that none of the mentioned arithmetic units require a complete ternary full adder. Instead, they can be designed by use of partial ternary full adder, whose input carry…
▽ More
This paper explores whether or not a complete ternary full adder, whose input variables can independently be '0', '1', or '2', is indispensable in the arithmetic blocks of adder, subtractor, and multiplier. Our investigations show that none of the mentioned arithmetic units require a complete ternary full adder. Instead, they can be designed by use of partial ternary full adder, whose input carry never becomes '2'. Furthermore, some new ternary compressors are proposed in this paper without the requirement of complete ternary full adder. The usage of partial ternary full adder can help circuit designers to simplify their designs, especially in transistor level.
△ Less
Submitted 17 February, 2019;
originally announced February 2019.
-
Systolic Pressure in Different Percents of Stenosis at Major Arteries
Authors:
Mohammad Reza Mirzaee,
Omid Ghasemalizadeh,
Bahar Firoozabadi,
Meitham Dandaneband
Abstract:
- Modeling Human cardiovascular system is always an important issue. One of the most effective methods is using lumped model to reach to a complete model of human cardiovascular system. Such modeling with advanced considerations is used in this paper. Some of these considerations are as follow: Exact simulating of ventricles as pressure suppliers, peristaltic motion of descending arteries as addit…
▽ More
- Modeling Human cardiovascular system is always an important issue. One of the most effective methods is using lumped model to reach to a complete model of human cardiovascular system. Such modeling with advanced considerations is used in this paper. Some of these considerations are as follow: Exact simulating of ventricles as pressure suppliers, peristaltic motion of descending arteries as additional suppliers, and dividing each vessel into more than one compartment to reach more accurate answers. Finally a circuit with more than 150 RLC segments and different elements is made. Then the verification of our complex circuit is done and at the end, obstruction as an important abnormality is investigated. For this aim different percents of obstruction in vital arteries are considered and the results are brought as different graphs at the end. According to physiological texts the citation of our simulation and its results are obvious. To earn productive information about arteries characteristics a 36-vessels model was chosen from biological sources.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Design of a Ternary Edge-Triggered D Flip-Flap-Flop for Multiple-Valued Sequential Logic
Authors:
Reza Faghih Mirzaee,
Niloofar Farahani
Abstract:
Development of large computerized systems requires both combinational and sequential circuits. Registers and counters are two important examples of sequential circuits, which are widely used in practical applications like CPUs. The basic element of sequential logic is Flip-Flop, which stores an input value and returns two outputs (Q and Q_bar). This paper presents an innovative ternary D Flip-Flap…
▽ More
Development of large computerized systems requires both combinational and sequential circuits. Registers and counters are two important examples of sequential circuits, which are widely used in practical applications like CPUs. The basic element of sequential logic is Flip-Flop, which stores an input value and returns two outputs (Q and Q_bar). This paper presents an innovative ternary D Flip-Flap-Flop, which offers circuit designers to customize their design by eliminating one of the outputs if it is not required. This unique feature of the new design leads to considerable power reduction in comparison with the previously presented structures. The proposed design is simulated and tested by HSPICE and 45 nm CMOS technology.
△ Less
Submitted 10 March, 2017; v1 submitted 13 September, 2016;
originally announced September 2016.
-
Crime Prediction Based On Crime Types And Using Spatial And Temporal Criminal Hotspots
Authors:
Tahani Almanie,
Rsha Mirza,
Elizabeth Lor
Abstract:
This paper focuses on finding spatial and temporal criminal hotspots. It analyses two different real-world crimes datasets for Denver, CO and Los Angeles, CA and provides a comparison between the two datasets through a statistical analysis supported by several graphs. Then, it clarifies how we conducted Apriori algorithm to produce interesting frequent patterns for criminal hotspots. In addition,…
▽ More
This paper focuses on finding spatial and temporal criminal hotspots. It analyses two different real-world crimes datasets for Denver, CO and Los Angeles, CA and provides a comparison between the two datasets through a statistical analysis supported by several graphs. Then, it clarifies how we conducted Apriori algorithm to produce interesting frequent patterns for criminal hotspots. In addition, the paper shows how we used Decision Tree classifier and Naive Bayesian classifier in order to predict potential crime types. To further analyse crimes datasets, the paper introduces an analysis study by combining our findings of Denver crimes dataset with its demographics information in order to capture the factors that might affect the safety of neighborhoods. The results of this solution could be used to raise awareness regarding the dangerous locations and to help agencies to predict future crimes in a specific location within a particular time.
△ Less
Submitted 9 August, 2015;
originally announced August 2015.
-
Beat Pressure and Comparing it with Ascending Aorta Pressure in Normal and Abnormal Conditions
Authors:
Omid Ghasemalizadeh,
Mohammad Rreza Mirzaee,
Bahar Firoozabadi,
Behrang Sajadi,
Ali Zolfonoon
Abstract:
Lumped method (Electrical analogy) is a quick and easy way to model human cardiovascular system. In this paper Lumped method is used for simulating a complete model. It describes a 36-vessel model and cardiac system of human body with details that could show hydrodynamic parameters of cardiovascular system. Also this paper includes modeling of pulmonary, atrium, left and right ventricles with thei…
▽ More
Lumped method (Electrical analogy) is a quick and easy way to model human cardiovascular system. In this paper Lumped method is used for simulating a complete model. It describes a 36-vessel model and cardiac system of human body with details that could show hydrodynamic parameters of cardiovascular system. Also this paper includes modeling of pulmonary, atrium, left and right ventricles with their equivalent circuits. Exact modeling of right and left ventricles pressure with division of ascending aorta into 27 segments increases the accuracy of our simulation. In this paper we show that a calculated pressure for aorta from our complex circuit is near to measured pressure by using advanced medical instruments. Also it is shown that pressure graph from brachial is so near to aortic pressure because of this its pressure signal is usable instead of aortic pressure. Furthermore, obstruction in ascending aorta, brachial and its effects has been showed in different figures.
△ Less
Submitted 21 November, 2014;
originally announced November 2014.
-
Exact Modeling of Cardiovascular System Using Lumped Method
Authors:
Omid Ghasemalizadeh,
Mohammad Reza Mirzaee,
Bahar Firoozabadi,
Kamran Hassani
Abstract:
Electrical analogy (Lumped method) is an easy way to model human cardiovascular system. In this paper Lumped method is used for simulating a complete model. It describes a 36-vessel model and cardiac system of human body with details that could show hydrodynamic parameters of cardiovascular system. Also this paper includes modeling of pulmonary, atrium, left and right ventricles with their equival…
▽ More
Electrical analogy (Lumped method) is an easy way to model human cardiovascular system. In this paper Lumped method is used for simulating a complete model. It describes a 36-vessel model and cardiac system of human body with details that could show hydrodynamic parameters of cardiovascular system. Also this paper includes modeling of pulmonary, atrium, left and right ventricles with their equivalent circuits. Exact modeling of right and left ventricles pressure increases the accuracy of our simulation. In this paper we show that a calculated pressure for aorta from our complex circuit is near to measured pressure by using advanced medical instruments.
△ Less
Submitted 19 November, 2014;
originally announced November 2014.
-
Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption of Disk and Bearing
Authors:
Omid Ghasemalizadeh,
Mohammad Reza Mirzaee,
Hossein Sadeghi,
Mohammad Taghi Ahmadian
Abstract:
One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of inertia. Using these elements, the entire continuous system is discretized and the corresponding differential equation can be stated in matrix form. The bearings at th…
▽ More
One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of inertia. Using these elements, the entire continuous system is discretized and the corresponding differential equation can be stated in matrix form. The bearings at the end of the shaft are modeled as equivalent spring and dampers which are applied as boundary conditions to the discretized system. In this paper the dynamics of a rotor-bearing system is analyzed, considering the gyroscopic effect. The thickness of the disk and bearings is also taken into account. Continuous model is used for shaft. Results Show that, the stiffness of the shaft and the natural frequencies of the system increase, while the amplitude of vibration decreases as a consequence of increasing the thickness of the bearing.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
