-
End-to-End Ascent-Entry Mission Performance Optimization Using Gaussian Quadrature Collocation
Authors:
Alexander T. Miller,
Anil V. Rao
Abstract:
The performance optimization for a combined ascent-entry mission subject to constraints on heating rate and heating load is studied. The ascent vehicle is modeled as a three-stage rocket that places the vehicle onto a suborbital exo-atmopheric trajectory after which the vehicle undergoes an unpowered entry and descent to a vertically downward terminal condition. The entry vehicle is modeled as a h…
▽ More
The performance optimization for a combined ascent-entry mission subject to constraints on heating rate and heating load is studied. The ascent vehicle is modeled as a three-stage rocket that places the vehicle onto a suborbital exo-atmopheric trajectory after which the vehicle undergoes an unpowered entry and descent to a vertically downward terminal condition. The entry vehicle is modeled as a high lift-to-drag ratio vehicle that is capable of withstanding high levels of thermal and structural loads. A performance index is designed to improve control margin while attenuating phugoid oscillations during atmospheric entry. Furthermore, a mission corresponding to a prototype launch and target point is used in this study. The trajectory optimization problem is formulated as a multiple-phase optimal control problem, and the optimal control problem is solved using an adaptive Gaussian quadrature collocation method. A key aspect of the optimized trajectories is that, for particular ranges of maximum allowable heating rate and heating load during entry, relatively small adjustments made during ascent can potentially decrease the control effort required during atmospheric entry. Outside of these ranges for maximum allowable heating rate and heating load, however, it is found that the required control effort increases and eventually saturates the commanded angle of attack upon initial descent. The key features of the optimized trajectories and controls are identified, and the approach developed in this paper provides a systematic method for end-to-end ascent-entry trajectory optimization.
△ Less
Submitted 25 April, 2021;
originally announced April 2021.
-
Nonsingular Euler Parameterizations for Motion of a Point Mass in Atmospheric Flight
Authors:
Alexander T. Miller,
Anil V. Rao
Abstract:
Three parameterizations are developed for modeling translational motion of a point mass in atmosphere flight over a central rotating body. Unlike well-known parameterizations such as spherical coordinate parameterizations, where position and velocity are parameterized using a magnitude an an Euler angle rotation sequence, the method presented in this research employs Euler parameters. Consequently…
▽ More
Three parameterizations are developed for modeling translational motion of a point mass in atmosphere flight over a central rotating body. Unlike well-known parameterizations such as spherical coordinate parameterizations, where position and velocity are parameterized using a magnitude an an Euler angle rotation sequence, the method presented in this research employs Euler parameters. Consequently, singularities and trigonometric functions are eliminated from the differential equations of motion. As a result, the new parameterizations presented in this paper offer computational advantages over standard parameterizations that employ Euler angle sequences. Finally, an example is studied where an atmospheric vehicle moves while in vertical flight, demonstrating the nonsingular nature of the formulations developed in this paper.
△ Less
Submitted 18 April, 2021;
originally announced April 2021.
-
Nonsingular Parameterization for Modeling Translational Motion Using Euler Parameters
Authors:
Alexander T. Miller,
Anil V. Rao
Abstract:
A parameterization is described for quantifying translational motion of a point in three-dimensional Euclidean space. The parameterization is similar to well-known parameterizations such as spherical coordinates in that both position and velocity are decoupled into magnitude and orientation components. Unlike these standard parameterizations, where principal rotation sequences are employed, the me…
▽ More
A parameterization is described for quantifying translational motion of a point in three-dimensional Euclidean space. The parameterization is similar to well-known parameterizations such as spherical coordinates in that both position and velocity are decoupled into magnitude and orientation components. Unlike these standard parameterizations, where principal rotation sequences are employed, the method presented in this research employs Euler parameters. By using Euler parameters instead of Euler angles, singularities and trigonometric functions are removed from the equations of motion. The parameterization is demonstrated on two examples, where it is found that the new parameterization offers both mathematical and computational advantages over other commonly used parameterizations.
△ Less
Submitted 22 November, 2020;
originally announced November 2020.
-
Mesh Refinement Method for Solving Optimal Control Problems with Nonsmooth Solutions Using Jump Function Approximations
Authors:
Alexander T. Miller,
WIlliam W. Hager,
Anil V. Rao
Abstract:
A mesh refinement method is described for solving optimal control problems using Legendre-Gauss-Radau collocation. The method detects discontinuities in the control solution by employing an edge detection scheme based on jump function approximations. When discontinuities are identified, the mesh is refined with a targeted $h$-refinement approach whereby the discontinuity locations are bracketed wi…
▽ More
A mesh refinement method is described for solving optimal control problems using Legendre-Gauss-Radau collocation. The method detects discontinuities in the control solution by employing an edge detection scheme based on jump function approximations. When discontinuities are identified, the mesh is refined with a targeted $h$-refinement approach whereby the discontinuity locations are bracketed with mesh points. The remaining smooth portions of the mesh are refined using previously developed techniques. The method is demonstrated on two examples, and results indicate that the method solves optimal control problems with discontinuous control solutions using fewer mesh refinement iterations and less computation time when compared with previously developed methods.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Method for Chance Constrained Optimal Control Using Biased Kernel Density Estimators
Authors:
Rachel E. Keil,
Alexander T. Miller,
Mrinal Kumar,
Anil V. Rao
Abstract:
A method is developed to numerically solve chance constrained optimal control problems. The chance constraints are reformulated as nonlinear constraints that retain the probability properties of the original constraint. The reformulation transforms the chance constrained optimal control problem into a deterministic optimal control problem that can be solved numerically. The new method developed in…
▽ More
A method is developed to numerically solve chance constrained optimal control problems. The chance constraints are reformulated as nonlinear constraints that retain the probability properties of the original constraint. The reformulation transforms the chance constrained optimal control problem into a deterministic optimal control problem that can be solved numerically. The new method developed in this paper approximates the chance constraints using Markov Chain Monte Carlo (MCMC) sampling and kernel density estimators whose kernels have integral functions that bound the indicator function. The nonlinear constraints resulting from the application of kernel density estimators are designed with bounds that do not violate the bounds of the original chance constraint. The method is tested on a non-trivial chance constrained modification of a soft lunar landing optimal control problem and the results are compared with results obtained using a conservative deterministic formulation of the optimal control problem. The results show that this new method efficiently solves chance constrained optimal control problems.
△ Less
Submitted 27 May, 2020; v1 submitted 17 March, 2020;
originally announced March 2020.
-
The Galactic Census of High- and Medium-mass Protostars. I. Catalogues and First Results from Mopra HCO+ Maps
Authors:
Peter J. Barnes,
Yoshinori Yonekura,
Yasuo Fukui,
Andrew T. Miller,
Martin Mühlegger,
Lawrence C. Agars,
Yosuke Miyamoto,
Naoko Furukawa,
George Papadopoulos,
Scott L. Jones,
Audra K. Hernandez,
Stefan N. O'Dougherty,
Jonathan C. Tan
Abstract:
The Census of High- and Medium-mass Protostars (CHaMP) is the first large-scale, unbiased, uniform mapping survey at sub-parsec scale resolution of 90 GHz line emission from massive molecular clumps in the Milky Way. We present the first Mopra (ATNF) maps of the CHaMP survey region (300°>l>280°) in the HCO+ J=1-0 line, which is usually thought to trace gas at densities up to 10^11 m-3. In this pap…
▽ More
The Census of High- and Medium-mass Protostars (CHaMP) is the first large-scale, unbiased, uniform mapping survey at sub-parsec scale resolution of 90 GHz line emission from massive molecular clumps in the Milky Way. We present the first Mopra (ATNF) maps of the CHaMP survey region (300°>l>280°) in the HCO+ J=1-0 line, which is usually thought to trace gas at densities up to 10^11 m-3. In this paper we introduce the survey and its strategy, describe the observational and data reduction procedures, and give a complete catalogue of moment maps of the HCO+ J=1-0 emission from the ensemble of 301 massive molecular clumps. From these maps we also derive the physical parameters of the clumps, using standard molecular spectral-line analysis techniques. This analysis yields the following range of properties: integrated line intensity 1-30 K km s-1, peak line brightness 1-7 K, linewidth 1-10 km s-1, integrated line luminosity 0.5-200 K km s-1 pc^2, FWHM size 0.2-2.5 pc, mean projected axial ratio 2, optical depth 0.08-2, total surface density 30-3000 M{\sun} pc-2, number density 0.2-30 x 10^9 m-3, mass 15-8000 M{\sun}, virial parameter 1-55, and total gas pressure 0.3-700 pPa. We find that the CHaMP clumps do not obey a Larson-type size-linewidth relation. Among the clumps, there exists a large population of subthermally excited, weakly-emitting (but easily detectable) dense molecular clumps, confirming the prediction of Narayanan et al. (2008). These weakly-emitting clumps comprise 95% of all massive clumps by number, and 87% of the molecular mass, in this portion of the Galaxy; their properties are distinct from the brighter massive star-forming regions that are more typically studied. If the clumps evolve by slow contraction, the 95% of fainter clumps may represent a long-lived stage of pressure-confined, gravitationally stable massive clump evolution, while the CHaMP ... (abridged)
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
