Showing 1–42 of 42 results for author: Miles, M

A simple optimisation for the MeerKAT Pulsar Timing Array

Authors: Hannah Middleton, Ryan M. Shannon, Matthew Bailes, Andrew D. Cameron, Alessandro Corongiu, Marisa Geyer, Max Jones, Michael Kramer, Matthew T. Miles, Aditya Parthasarathy, Andrea Possenti, Daniel J. Reardon

Abstract: The goal of the MeerKAT radio telescope's pulsar timing array programme (MPTA) is the detection of gravitational waves (GWs) of nanohertz frequencies. Evidence for such a signal was recently announced by the MPTA and several other pulsar timing array (PTA) consortia. Given an array of pulsars and an observation strategy, we consider whether small adjustments to the observing schedule can provide g… ▽ More The goal of the MeerKAT radio telescope's pulsar timing array programme (MPTA) is the detection of gravitational waves (GWs) of nanohertz frequencies. Evidence for such a signal was recently announced by the MPTA and several other pulsar timing array (PTA) consortia. Given an array of pulsars and an observation strategy, we consider whether small adjustments to the observing schedule can provide gains in signal-to-noise ratio (S/N) for a stochastic GW background signal produced by a population of massive black hole binaries. Our approach uses a greedy algorithm to reallocate available integration time between pulsars in the array. The overall time dedicated to MPTA observing is kept constant so that there is only minimal disruption to the current observation strategy. We assume a GW signal consistent with those reported. For the sake of demonstrating our method, we also make several simplifying assumptions about the noise properties of the pulsars in the MPTA. Given these assumptions, we find that small adjustments to the observing schedule can provide an increased S/N by $\approx 20\%$ for a $10\,{\rm yr}$ PTA lifespan. △ Less

Submitted 5 May, 2025; originally announced May 2025.

Comments: 9 pages, 5 figures, accepted for publication in MNRAS

Cell divisions both challenge and refine tissue boundaries in the Drosophila embryo

Authors: Veronica Castle, Merdeka Miles, Rodrigo Fernandez-Gonzalez, Gonca Erdemci-Tandogan

Abstract: Tissue boundaries pattern embryos, suppress tumours, and provide directional cues. Tissue boundaries are associated with supracellular cables formed by actin and the molecular motor non-muscle myosin II. Actomyosin cables generate tension that prevents cell mixing. Whether other cellular behaviours contribute to the formation of linear interfaces between cell populations remains unclear. In the Dr… ▽ More Tissue boundaries pattern embryos, suppress tumours, and provide directional cues. Tissue boundaries are associated with supracellular cables formed by actin and the molecular motor non-muscle myosin II. Actomyosin cables generate tension that prevents cell mixing. Whether other cellular behaviours contribute to the formation of linear interfaces between cell populations remains unclear. In the Drosophila embryo, an actomyosin-based boundary separates the ectoderm from the mesectoderm, a group of neuronal and glial progenitors. Mathematical modelling predicted that cell divisions in the ectoderm challenge the mesectoderm-ectoderm (ME) boundary. Consistent with this, suppressing ectoderm cell divisions in vivo prevented cell mixing across the ME boundary when actomyosin-based tension was lost. Our mathematical model also predicted that cell divisions sharpen the ME boundary by reducing tension and increasing cell motility in the ectoderm. We found that inhibiting ectoderm divisions in vivo reduced boundary linearity. Using laser ablation and cell tracking, we demonstrated that cell divisions reduced junctional tension and increased cell movement in the ectoderm. Together, our results reveal that cell divisions facilitate cellular rearrangements to increase fluidity in a novel mechanism for boundary refinement. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: 28 pages, 7 figures

The MeerKAT Pulsar Timing Array: Maps of the gravitational-wave sky with the 4.5 year data release

Authors: Kathrin Grunthal, Rowina S. Nathan, Eric Thrane, David J. Champion, Matthew T. Miles, Ryan M. Shannon, Atharva D. Kulkarni, Federico Abbate, Sarah Buchner, Andrew D. Cameron, Marisa Geyer, Pratyasha Gitika, Michael J. Keith, Michael Kramer, Paul D. Lasky, Aditya Parthasarathy, Daniel J. Reardon, Jaikhomba Singha, Vivek Venkatraman Krishnan

Abstract: In an accompanying publication, the MeerKAT Pulsar Timing Array (MPTA) collaboration reports tentative evidence for the presence of a stochastic gravitational-wave background, following observations of similar signals from the European and Indian Pulsar Timing Arrays, NANOGrav, the Parkes Pulsar Timing Array and the Chinese Pulsar Timing Array. If such a gravitational-wave background signal origin… ▽ More In an accompanying publication, the MeerKAT Pulsar Timing Array (MPTA) collaboration reports tentative evidence for the presence of a stochastic gravitational-wave background, following observations of similar signals from the European and Indian Pulsar Timing Arrays, NANOGrav, the Parkes Pulsar Timing Array and the Chinese Pulsar Timing Array. If such a gravitational-wave background signal originates from a population of inspiraling supermassive black-hole binaries, the signal may be anisotropically distributed on the sky. In this Letter we evaluate the anisotropy of the MPTA signal using a spherical harmonic decomposition. We discuss complications arising from the covariance between pulsar pairs and regularisation of the Fisher matrix. Applying our method to the 4.5 yr dataset, we obtain two forms of sky maps for the three most sensitive MPTA frequency bins between 7 -21 nHz. Our "clean maps'' estimate the distribution of gravitational-wave strain power with minimal assumptions. Our radiometer maps answer the question: is there a statistically significant point source? We find a noteworthy hotspot in the 7 nHz clean map with a $p$-factor of $p=0.015$ (not including trial factors). Future observations are required to determine if this hotspot is of astrophysical origin. △ Less

Submitted 2 December, 2024; originally announced December 2024.

The MeerKAT Pulsar Timing Array: The first search for gravitational waves with the MeerKAT radio telescope

Authors: Matthew T. Miles, Ryan M. Shannon, Daniel J. Reardon, Matthew Bailes, David J. Champion, Marisa Geyer, Pratyasha Gitika, Kathrin Grunthal, Michael J. Keith, Michael Kramer, Atharva D. Kulkarni, Rowina S. Nathan, Aditya Parthasarathy, Jaikhomba Singha, Gilles Theureau, Eric Thrane, Federico Abbate, Sarah Buchner, Andrew D. Cameron, Fernando Camilo, Beatrice E. Moreschi, Golam Shaifullah, Mohsen Shamohammadi, Andrea Possenti, Vivek Venkatraman Krishnan

Abstract: Pulsar Timing Arrays search for nanohertz-frequency gravitational waves by regularly observing ensembles of millisecond pulsars over many years to look for correlated timing residuals. Recently the first evidence for a stochastic gravitational wave background has been presented by the major Arrays, with varying levels of significance ($\sim$2-4$σ$). In this paper we present the results of backgrou… ▽ More Pulsar Timing Arrays search for nanohertz-frequency gravitational waves by regularly observing ensembles of millisecond pulsars over many years to look for correlated timing residuals. Recently the first evidence for a stochastic gravitational wave background has been presented by the major Arrays, with varying levels of significance ($\sim$2-4$σ$). In this paper we present the results of background searches with the MeerKAT Pulsar Timing Array. Although of limited duration (4.5 yr), the $\sim$ 250,000 arrival times with a median error of just $3 μ$s on 83 pulsars make it very sensitive to spatial correlations. Detection of a gravitational wave background requires careful modelling of noise processes to ensure that any correlations represent a fit to the underlying background and not other misspecified processes. Under different assumptions about noise processes we can produce either what appear to be compelling Hellings-Downs correlations of high significance (3-3.4$σ$) with a spectrum close to that which is predicted, or surprisingly, under slightly different assumptions, ones that are insignificant. This appears to be related to the fact that many of the highest precision MeerKAT Pulsar Timing Array pulsars are in close proximity and dominate the detection statistics. The sky-averaged characteristic strain amplitude of the correlated signal in our most significant model is $h_{c, {\rm yr}} = 7.5^{+0.8}_{-0.9} \times 10^{-15}$ measured at a spectral index of $α=-0.26$, decreasing to $h_{c, {\rm yr}} = 4.8^{+0.8}_{-0.9} \times 10^{-15}$ when assessed at the predicted $α=-2/3$. These data will be valuable as the International Pulsar Timing Array project explores the significance of gravitational wave detections and their dependence on the assumed noise models. △ Less

Submitted 2 December, 2024; originally announced December 2024.

The MeerKAT Pulsar Timing Array: The $4.5$-year data release and the noise and stochastic signals of the millisecond pulsar population

Authors: Matthew T. Miles, Ryan M. Shannon, Daniel J. Reardon, Matthew Bailes, David J. Champion, Marisa Geyer, Pratyasha Gitika, Kathrin Grunthal, Michael J. Keith, Michael Kramer, Atharva D. Kulkarni, Rowina S. Nathan, Aditya Parthasarathy, Nataliya K. Porayko, Jaikhomba Singha, Gilles Theureau, Federico Abbate, Sarah Buchner, Andrew D. Cameron, Fernando Camilo, Beatrice E. Moreschi, Golam Shaifullah, Mohsen Shamohammadi, Vivek Venkatraman Krishnan

Abstract: Pulsar timing arrays are ensembles of regularly observed millisecond pulsars timed to high precision. Each pulsar in an array could be affected by a suite of noise processes, most of which are astrophysically motivated. Analysing them carefully can be used to understand these physical processes. However, the primary purpose of these experiments is to detect signals that are common to all pulsars,… ▽ More Pulsar timing arrays are ensembles of regularly observed millisecond pulsars timed to high precision. Each pulsar in an array could be affected by a suite of noise processes, most of which are astrophysically motivated. Analysing them carefully can be used to understand these physical processes. However, the primary purpose of these experiments is to detect signals that are common to all pulsars, in particular signals associated with a stochastic gravitational wave background. To detect this, it is paramount to appropriately characterise other signals that may otherwise impact array sensitivity or cause a spurious detection. Here we describe the second data release and first detailed noise analysis of the pulsars in the MeerKAT Pulsar Timing Array, comprising high-cadence and high-precision observations of $83$ millisecond pulsars over $4.5$ years. We use this analysis to search for a common signal in the data, finding a process with an amplitude of $\log_{10}\mathrm{A_{CURN}} = -14.25^{+0.21}_{-0.36}$ and spectral index $γ_\mathrm{CURN} = 3.60^{+1.31}_{-0.89}$. Fixing the spectral index at the value predicted for a background produced by the inspiral of binary supermassive black holes, we measure the amplitude to be $\log_{10}\mathrm{A_{CURN}} = -14.28^{+0.21}_{-0.21}$ at a significance expressed as a Bayes factor of $\ln(\mathcal{B}) = 4.46$. Under both assumptions, the amplitude that we recover is larger than those reported by other PTA experiments. We use the results of this analysis to forecast our sensitivity to a gravitational wave background possessing the spectral properties of the common signal we have measured. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Ultraviolet Technology To Prepare For The Habitable Worlds Observatory

Authors: Sarah Tuttle, Mark Matsumura, David R. Ardila, Pin Chen, Michael Davis, Camden Ertley, Emily Farr, Brian Fleming, Kevin France, Cynthia Froning, Fabien Grisé, Erika Hamden, John Hennessy, Keri Hoadley, Stephan R. McCandliss, Drew M. Miles, Shouleh Nikzad, Manuel Quijada, Isu Ravi, Luis Rodriguez de Marcos, Paul Scowen, Oswald Siegmund, Carlos J. Vargas, Dmitry Vorobiev, Emily M. Witt

Abstract: We present here the current state of a collection of promising ultraviolet technologies in preparation for the Habitable Worlds Observatory. Working with experts representing a significant number of groups working in the ultraviolet, we summarize some of the leading science drivers, present an argument for a 100 nm blue wavelength cutoff, and gather current state of the art of UV technologies. We… ▽ More We present here the current state of a collection of promising ultraviolet technologies in preparation for the Habitable Worlds Observatory. Working with experts representing a significant number of groups working in the ultraviolet, we summarize some of the leading science drivers, present an argument for a 100 nm blue wavelength cutoff, and gather current state of the art of UV technologies. We present the state of the art of contamination control, a crucial piece of the UV instrument plan. We explore next steps with individual technologies, as well as present paths forward with systems level testing and development. △ Less

Submitted 15 August, 2024; v1 submitted 13 August, 2024; originally announced August 2024.

Beyond the Dashboard: Investigating Distracted Driver Communication Preferences for ADAS

Authors: Aamir Hasan, D. Livingston McPherson, Melissa Miles, Katherine Driggs-Campbell

Abstract: Distracted driving is a major cause of road fatalities. With improvements in driver (in)attention detection, these distracted situations can be caught early to alert drivers and improve road safety and comfort. However, drivers may have differing preferences for the modes of such communication based on the driving scenario and their current distraction state. To this end, we present an (N=147) whe… ▽ More Distracted driving is a major cause of road fatalities. With improvements in driver (in)attention detection, these distracted situations can be caught early to alert drivers and improve road safety and comfort. However, drivers may have differing preferences for the modes of such communication based on the driving scenario and their current distraction state. To this end, we present an (N=147) where videos of simulated driving scenarios were utilized to learn drivers preferences for modes of communication and their evolution with the drivers changing attention. The survey queried participants preferred modes of communication for scenarios such as collisions or stagnation at a green light. that inform the future of communication between drivers and their vehicles. We showcase the different driver preferences based on the nature of the driving scenario and also show that they evolve as the drivers distraction state changes △ Less

Submitted 23 June, 2024; v1 submitted 5 March, 2024; originally announced March 2024.

Comments: 10 pages, 6 figures. All materials associated with the study can be found at https://sites.google.com/illinois.edu/driver-preference-for-modes

Extending Polaris to Support Transactions

Authors: Josep Aguilar-Saborit, Raghu Ramakrishnan, Kevin Bocksrocker, Alan Halverson, Konstantin Kosinsky, Ryan O'Connor, Nadejda Poliakova, Moe Shafiei, Taewoo Kim, Phil Kon-Kim, Haris Mahmud-Ansari, Blazej Matuszyk, Matt Miles, Sumin Mohanan, Cristian Petculescu, Ishan Rahesh-Madan, Emma Rose-Wirshing, Elias Yousefi

Abstract: In Polaris, we introduced a cloud-native distributed query processor to perform analytics at scale. In this paper, we extend the underlying Polaris distributed computation framework, which can be thought of as a read-only transaction engine, to execute general transactions (including updates, deletes, inserts and bulk loads, in addition to queries) for Tier 1 warehousing workloads in a highly perf… ▽ More In Polaris, we introduced a cloud-native distributed query processor to perform analytics at scale. In this paper, we extend the underlying Polaris distributed computation framework, which can be thought of as a read-only transaction engine, to execute general transactions (including updates, deletes, inserts and bulk loads, in addition to queries) for Tier 1 warehousing workloads in a highly performant and predictable manner. We take advantage of the immutability of data files in log-structured data stores and build on SQL Server transaction management to deliver full transactional support with Snapshot Isolation semantics, including multi-table and multi-statement transactions. With the enhancements described in this paper, Polaris supports both query processing and transactions for T-SQL in Microsoft Fabric. △ Less

Submitted 20 January, 2024; originally announced January 2024.

Comments: 12 pages, 12 Figures

MeerKAT Pulsar Timing Array parallaxes and proper motions

Authors: Mohsen Shamohammadi, Matthew Bailes, Christopher Flynn, Daniel J. Reardon, Ryan M. Shannon, Sarah Buchner, Andrew D. Cameron, Fernando Camilo, Alessandro Coronigu, Marisa Geyer, Michael Kramer, Matthew Miles, Renee Spiewak

Abstract: We have determined positions, proper motions, and parallaxes of $77$ millisecond pulsars (MSPs) from $\sim3$ years of MeerKAT radio telescope observations. Our timing and noise analyses enable us to measure $35$ significant parallaxes ($12$ of them for the first time) and $69$ significant proper motions. Eight pulsars near the ecliptic have an accurate proper motion in ecliptic longitude only. PSR… ▽ More We have determined positions, proper motions, and parallaxes of $77$ millisecond pulsars (MSPs) from $\sim3$ years of MeerKAT radio telescope observations. Our timing and noise analyses enable us to measure $35$ significant parallaxes ($12$ of them for the first time) and $69$ significant proper motions. Eight pulsars near the ecliptic have an accurate proper motion in ecliptic longitude only. PSR~J0955$-$6150 has a good upper limit on its very small proper motion ($<$0.4 mas yr$^{-1}$). We used pulsars with accurate parallaxes to study the MSP velocities. This yields $39$ MSP transverse velocities, and combined with MSPs in the literature (excluding those in Globular Clusters) we analyse $66$ MSPs in total. We find that MSPs have, on average, much lower velocities than normal pulsars, with a mean transverse velocity of only $78(8)$ km s$^{-1}$ (MSPs) compared with $246(21)$ km s$^{-1}$ (normal pulsars). We found no statistical differences between the velocity distributions of isolated and binary millisecond pulsars. From Galactocentric cylindrical velocities of the MSPs, we derive 3-D velocity dispersions of $σ_ρ$, $σ_φ$, $σ_{z}$ = $63(11)$, $48(8)$, $19(3)$ km s$^{-1}$. We measure a mean asymmetric drift with amplitude $38(11)$ km s$^{-1}$, consistent with expectation for MSPs, given their velocity dispersions and ages. The MSP velocity distribution is consistent with binary evolution models that predict very few MSPs with velocities $>300$ km s$^{-1}$ and a mild anticorrelation of transverse velocity with orbital period. △ Less

Submitted 12 January, 2024; originally announced January 2024.

An insight into chromatic behaviour of jitter in pulsars and its modelling: A case study of PSR J0437$-$4715

Authors: A. D. Kulkarni, R. M. Shannon, D. J. Reardon, M. T. Miles, M. Bailes, M. Shamohammadi

Abstract: Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of… ▽ More Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of interest such as nanohertz-frequency gravitational waves. Current white noise models used in pulsar timing analyses attempt to account for this, assuming complete correlation of uncertainties through the arrival times collected in a unique observation and no frequency dependence of jitter (which corresponds to a rank-one covariance matrix). However, previous studies show that the brightest millisecond pulsar at decimetre wavelengths, PSR J0437$-$4715, shows decorrelation and frequency dependence of jitter noise. Here we present a detailed study of the decorrelation of jitter noise in PSR J0437$-$4715 and implement a new technique to model it. We show that the rate of decorrelation due to jitter can be expressed as a power-law in frequency. We analyse the covariance matrix associated with the jitter noise process and find that a higher-rank-approximation is essential to account for the decorrelation and to account for frequency dependence of jitter noise. We show that the use of this novel method significantly improves the estimation of other chromatic noise parameters such as dispersion measure variations. However, we find no significant improvement in errors and estimation of other timing model parameters suggesting that current methods are not biased for other parameters, for this pulsar due to this misspecification. We show that pulse energy variations show a similar decorrelation to the jitter noise, indicating a common origin for both observables. △ Less

Submitted 8 January, 2024; v1 submitted 7 January, 2024; originally announced January 2024.

Comments: 10 pages; 7 figures; Accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS)

Flux density monitoring of 89 millisecond pulsars with MeerKAT

Authors: P. Gitika, M. Bailes, R. M. Shannon, D. J. Reardon, A. D. Cameron, M. Shamohammadi, M. T. Miles, C. M. L. Flynn, A. Corongiu, M. Kramer

Abstract: We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation i… ▽ More We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation indices, their average and peak-to-median flux densities in each sub-band, as well as their mean spectral indices across the entire frequency range. We find that the vast majority of the MSPs have spectra that are well described by a simple power law, with a mean spectral index of -1.86(6). Using the temporal variation of the flux densities we measured the structure functions and determined the refractive scintillation timescale for seven. The structure functions provide strong evidence that the intrinsic radio luminosities of MSPs are stable. As a population, the average modulation index at 20 cm wavelengths peaks near unity at dispersion measures (DMs) of $\sim$20 pc cm$^{-3}$ and by a DM of 100 pc cm$^{-3}$ are closer to 0.2, due to refractive scintillation. We find that timing arrays can improve their observing efficiency by reacting to scintillation maxima, and that 20 cm FRB surveys should prioritise highly scintillating mid-latitude regions of the Galactic sky where they will find $\sim$30% more events and bursts at greater distances. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: 16 pages, 8 figures, accepted for publication in MNRAS

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

Authors: The International Pulsar Timing Array Collaboration, G. Agazie, J. Antoniadis, A. Anumarlapudi, A. M. Archibald, P. Arumugam, S. Arumugam, Z. Arzoumanian, J. Askew, S. Babak, M. Bagchi, M. Bailes, A. -S. Bak Nielsen, P. T. Baker, C. G. Bassa, A. Bathula, B. Bécsy, A. Berthereau, N. D. R. Bhat, L. Blecha, M. Bonetti, E. Bortolas, A. Brazier, P. R. Brook, M. Burgay , et al. (220 additional authors not shown)

Abstract: The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA… ▽ More The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 21 pages, 9 figures, submitted to ApJ

The Parkes Pulsar Timing Array Third Data Release

Authors: Andrew Zic, Daniel J. Reardon, Agastya Kapur, George Hobbs, Rami Mandow, Małgorzata Curyło, Ryan M. Shannon, Jacob Askew, Matthew Bailes, N. D. Ramesh Bhat, Andrew Cameron, Zu-Cheng Chen, Shi Dai, Valentina Di Marco, Yi Feng, Matthew Kerr, Atharva Kulkarni, Marcus E. Lower, Rui Luo, Richard N. Manchester, Matthew T. Miles, Rowina S. Nathan, Stefan Osłowski, Axl F. Rogers, Christopher J. Russell , et al. (9 additional authors not shown)

Abstract: We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily ob… ▽ More We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release. △ Less

Submitted 17 October, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 15 pages, 6 figures. Accepted for publication in PASA

Journal ref: Publ.Astron.Soc.Austral. 40 (2023) e049

The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array

Authors: Daniel J. Reardon, Andrew Zic, Ryan M. Shannon, Valentina Di Marco, George B. Hobbs, Agastya Kapur, Marcus E. Lower, Rami Mandow, Hannah Middleton, Matthew T. Miles, Axl F. Rogers, Jacob Askew, Matthew Bailes, N. D. Ramesh Bhat, Andrew Cameron, Matthew Kerr, Atharva Kulkarni, Richard N. Manchester, Rowina S. Nathan, Christopher J. Russell, Stefan Osłowski, Xing-Jiang Zhu

Abstract: The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravita… ▽ More The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 18 pages, 10 figures. Accepted for publication in ApJL

Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array

Authors: Daniel J. Reardon, Andrew Zic, Ryan M. Shannon, George B. Hobbs, Matthew Bailes, Valentina Di Marco, Agastya Kapur, Axl F. Rogers, Eric Thrane, Jacob Askew, N. D. Ramesh Bhat, Andrew Cameron, Małgorzata Curyło, William A. Coles, Shi Dai, Boris Goncharov, Matthew Kerr, Atharva Kulkarni, Yuri Levin, Marcus E. Lower, Richard N. Manchester, Rami Mandow, Matthew T. Miles, Rowina S. Nathan, Stefan Osłowski , et al. (4 additional authors not shown)

Abstract: Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of t… ▽ More Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 19 pages, 10 figures, Accepted for publication in ApJL

Toward robust detections of nanohertz gravitational waves

Authors: Valentina Di Marco, Andrew Zic, Matthew T. Miles, Daniel J. Reardon, Eric Thrane, Ryan M. Shannon

Abstract: The recent observation of a common red-noise process in pulsar timing arrays (PTAs) suggests that the detection of nanohertz gravitational waves might be around the corner. However, in order to confidently attribute this red process to gravitational waves, one must observe the Hellings-Downs curve -- the telltale angular correlation function associated with a gravitational-wave background. This ef… ▽ More The recent observation of a common red-noise process in pulsar timing arrays (PTAs) suggests that the detection of nanohertz gravitational waves might be around the corner. However, in order to confidently attribute this red process to gravitational waves, one must observe the Hellings-Downs curve -- the telltale angular correlation function associated with a gravitational-wave background. This effort is complicated by the complex modelling of pulsar noise. Without proper care, mis-specified noise models can lead to false-positive detections. Background estimation using bootstrap methods such as sky scrambles and phase shifts, which use the data to characterize the noise, are therefore important tools for assessing significance. We investigate the ability of current PTA experiments to estimate their background with "quasi-independent" scrambles -- characterized by a statistical "match" below the fiducial value: $|M|<0.1$. We show that sky scrambling is affected by "saturation" after $O(10)$ quasi-independent realizations; subsequent scrambles are no longer quasi-independent. We show phase scrambling saturates after $O(100)$ quasi-independent realizations. With so few independent scrambles, it is difficult to make reliable statements about the $\gtrsim 5 σ$ tail of the null distribution of the detection statistic. We discuss various methods by which one may increase the number of independent scrambles. We also consider an alternative approach wherein one re-frames the background estimation problem so that the significance is calculated using statistically dependent scrambles. The resulting $p$-value is in principle well-defined but may be susceptible to failure if assumptions about the data are incorrect. △ Less

Submitted 9 August, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Comments: Paper accepted for publication on ApJ on the 7th of August 2023

Improving pulsar-timing solutions through dynamic pulse fitting

Authors: Rowina S. Nathan, Matthew T. Miles, Gregory Ashton, Paul D. Lasky, Eric Thrane, Daniel J. Reardon, Ryan M. Shannon, Andrew D. Cameron

Abstract: Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing met… ▽ More Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing method that fits each observing epoch using basis functions. By fitting each epoch separately, we allow for the evolution of the pulse shape epoch to epoch. We apply our method to PSR J1103$-$5403 and demonstrate that it undergoes mode changing, making it the fourth millisecond pulsar to exhibit such behaviour. Our method, which is able to identify and time a single mode, yields a timing solution with a root-mean-square error of 1.343 $μ\mathrm{s}$, a factor of 1.78 improvement over template fitting on both modes. In addition, the white-noise amplitude is reduced 4.3 times, suggesting that fitting the full data set causes the mode changing to be incorrectly classified as white noise. This reduction in white noise boosts the signal-to-noise ratio of a gravitational-wave background signal for this particular pulsar by 32%. We discuss the possible applications for this method of timing to study pulsar magnetospheres and further improve the sensitivity of searches for nanohertz gravitational waves. △ Less

Submitted 31 May, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: Accepted in MNRAS, 8 pages, 8 figures

Flexible Supervised Autonomy for Exploration in Subterranean Environments

Authors: Harel Biggie, Eugene R. Rush, Danny G. Riley, Shakeeb Ahmad, Michael T. Ohradzansky, Kyle Harlow, Michael J. Miles, Daniel Torres, Steve McGuire, Eric W. Frew, Christoffer Heckman, J. Sean Humbert

Abstract: While the capabilities of autonomous systems have been steadily improving in recent years, these systems still struggle to rapidly explore previously unknown environments without the aid of GPS-assisted navigation. The DARPA Subterranean (SubT) Challenge aimed to fast track the development of autonomous exploration systems by evaluating their performance in real-world underground search-and-rescue… ▽ More While the capabilities of autonomous systems have been steadily improving in recent years, these systems still struggle to rapidly explore previously unknown environments without the aid of GPS-assisted navigation. The DARPA Subterranean (SubT) Challenge aimed to fast track the development of autonomous exploration systems by evaluating their performance in real-world underground search-and-rescue scenarios. Subterranean environments present a plethora of challenges for robotic systems, such as limited communications, complex topology, visually-degraded sensing, and harsh terrain. The presented solution enables long-term autonomy with minimal human supervision by combining a powerful and independent single-agent autonomy stack, with higher level mission management operating over a flexible mesh network. The autonomy suite deployed on quadruped and wheeled robots was fully independent, freeing the human supervision to loosely supervise the mission and make high-impact strategic decisions. We also discuss lessons learned from fielding our system at the SubT Final Event, relating to vehicle versatility, system adaptability, and re-configurable communications. △ Less

Submitted 11 April, 2023; v1 submitted 2 January, 2023; originally announced January 2023.

Comments: Field Robotics special issue: DARPA Subterranean Challenge, Advancement and Lessons Learned from the Finals

The MeerKAT Pulsar Timing Array: First Data Release

Authors: Matthew T. Miles, Ryan M. Shannon, Matthew Bailes, Daniel J. Reardon, Michael J. Keith, Andrew D. Cameron, Aditya Parthasarathy, Mohsen Shamohammadi, Renee Spiewak, Willem van Straten, Sarah Buchner, Fernando Camilo, Marisa Geyer, Aris Karastergiou, Michael Kramer, Maciej Serylak, Gilles Theureau, Vivek Venkatraman Krishnan

Abstract: We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsa… ▽ More We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope, and operates with a typical observing cadence of two weeks using the L-band receiver that records data from 856-1712 MHz. We provide a comprehensive description of the observing system, software, and pipelines used and developed for the MeerTime project. The data products made available as part of this data release are from the 78 pulsars that had at least $30$ observations between the start of the MeerTime programme in February 2019 and October 2021. These include both sub-banded and band-averaged arrival times, as well as the initial timing ephemerides, noise models, and the frequency-dependent standard templates (portraits) used to derive pulse arrival times. After accounting for detected noise processes in the data, the frequency-averaged residuals of $67$ of the pulsars achieved a root-mean-square residual precision of $< 1 μ\rm{s}$. We also present a novel recovery of the clock correction waveform solely from pulsar timing residuals, and an exploration into preliminary findings of interest to the international pulsar timing community. The arrival times, standards and full Stokes parameter calibrated pulsar timing archives are publicly available. △ Less

Submitted 8 December, 2022; originally announced December 2022.

Comments: 18 pages, 6 figures

Searches for Shapiro delay in seven binary pulsars using the MeerKAT telescope

Authors: Mohsen Shamohammadi, Matthew Bailes, Paulo C. C. Freire, Aditya Parthasarathy, Daniel J. Reardon, Ryan M. Shannon, Vivek Venkatraman Krishnan, Miquel C. i. Bernadich, Andrew D. Cameron, David J. Champion, Alessandro Corongiu, Christopher Flynn, Marisa Geyer, Michael Kramer, Matthew T. Miles, Andrea Possenti, Renee Spiewak

Abstract: Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope th… ▽ More Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope that show evidence of Shapiro delay: PSRs~J0101$-$6422, J1101$-$6424, J1125$-$6014, J1514$-$4946, J1614$-$2230, J1732$-$5049, and J1909$-$3744. Evidence for Shapiro delay was found in all of the systems, and for three the orientations and data quality enabled strong constraints on their orbital inclinations and component masses. For PSRs~J1125$-$6014, J1614$-$2230 and J1909$-$3744, we determined pulsar masses to be $M_{\rm p} = 1.68\pm 0.17 \, {\rm M_{\odot}} $, $1.94\pm 0.03 \, {\rm M_{\odot}} $ and $1.45 \pm 0.03 \, {\rm M_{\odot}}$, and companion masses to be $M_{\rm c} = 0.33\pm 0.02 \, {\rm M_{\odot}} $, $0.495\pm 0.005 \, {\rm M_{\odot}} $ and $0.205 \pm 0.003 \, {\rm M_{\odot}}$, respectively. This provides the first independent confirmation of PSR~J1614$-$2230's mass, one of the highest known. The Shapiro delays measured for PSRs~J0101$-$6422, J1101$-$6424, J1514$-$4946, and J1732$-$5049 were only weak, and could not provide interesting component mass limits. Despite a large number of millisecond pulsars being routinely timed, relatively few have accurate masses via Shapiro delays. We use simulations to show that this is expected, and provide a formula for observers to assess how accurately a pulsar mass can be determined. We also discuss the observed correlation between pulsar companion masses and spin period, and the anti-correlation between recycled pulsar mass and their companion masses. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Comments: 19 pages, 8 figures

FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium

Authors: Vincent Picouet, David Valls-Gabaud, Bruno Milliard, David Schiminovich, Drew M. Miles, Keri Hoadley, Erika Hamden, D. Christopher Martin, Gillian Kyne, Trent Brendel, Aafaque Raza Khan, Jean Evrard, Zeren Lin, Haeun Chung, Simran Agarwal, Ignacio Cevallos Aleman, Charles-Antoine Chevrier, Jess Li, Nicole Melso, Shouleh Nikzad, Didier Vibert, Nicolas Bray

Abstract: FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV multi-object slit spectrograph designed to map the faint UV emission surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission. This spectro-imager had its first launch on September 22nd 2018 out of Ft. Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly interrupted. Instead of th… ▽ More FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV multi-object slit spectrograph designed to map the faint UV emission surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission. This spectro-imager had its first launch on September 22nd 2018 out of Ft. Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly interrupted. Instead of the nominal 8 hours above 32 km altitude, the instrument could only perform science acquisition for 45 minutes at this altitude. In addition, the shape of the deflated balloon, combined with a full Moon, revealed a severe off-axis scattered light path, directly into the UV science detector and about 100 times larger than expected. In preparation for the next flight, and in addition to describing FIREBall-2's upgrade, this paper discusses the exposure time calculator (ETC) that has been designed to analyze the instrument's optimal performance (explore the instrument's limitations and subtle trade-offs). △ Less

Submitted 28 November, 2022; originally announced November 2022.

Wideband timing of the Parkes Pulsar Timing Array UWL data

Authors: Małgorzata Curyło, Timothy T. Pennucci, Matthew Bailes, N. D. Ramesh Bhat, Andrew D. Cameron, Shi Dai, George Hobbs, Agastya Kapur, Richard N. Manchester, Rami Mandow, Matthew T. Miles, Christopher J. Russell, Daniel J. Reardon, Ryan M. Shannon, Renée Spiewak, Andrew Zic, Xing-Jiang Zhu

Abstract: In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compa… ▽ More In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compared to typical narrow-band methods are, firstly, generation of two-dimensional templates accounting for pulse shape evolution with frequency and, secondly, simultaneous measurements of the pulse time-of-arrival (ToA) and dispersion measure (DM). This is the first time that wideband timing has been applied to a uniform data set collected with a single large-fractional bandwidth receiver, for which such techniques were originally developed. As a result of our study, we present a set of profile evolution models and new timing solutions including initial noise analysis. Precision of our ToA and DM measurements is in the range of 0.005 $-$ 2.08 $μ$s and (0.043$-$14.24)$\times10^{-4}$ cm$^{-3}$ pc, respectively, with 94% of the pulsars achieving a median ToA uncertainty of less than 1 $μ$s. △ Less

Submitted 23 November, 2022; originally announced November 2022.

Comments: 29 pages, 12 figures, Accepted for publication in ApJ

High Efficiency Echelle Gratings for the Far Ultraviolet

Authors: Nicholas Kruczek, Drew M. Miles, Brian Fleming, Randall McEntaffer, Kevin France, Fabien Grisé, Stephan McCandliss

Abstract: Modern grating manufacturing techniques suffer from inherent issues that limit their peak efficiencies. The anisotropic etching of silicon facilitates the creation of custom gratings that have sharp and atomically smooth facets, directly addressing these issues. We describe work to fabricate and characterize etched silicon echelles optimized for the far ultraviolet (FUV; 90 - 180 nm) bandpass. We… ▽ More Modern grating manufacturing techniques suffer from inherent issues that limit their peak efficiencies. The anisotropic etching of silicon facilitates the creation of custom gratings that have sharp and atomically smooth facets, directly addressing these issues. We describe work to fabricate and characterize etched silicon echelles optimized for the far ultraviolet (FUV; 90 - 180 nm) bandpass. We fabricate two echelles that have similar parameters to the mechanically ruled grating flown on the CHESS sounding rocket. We demonstrate a 42% increase in peak order efficiency and an 83% decrease in interorder scatter using these gratings. We also present analysis on where the remaining efficiency resides. These demonstrated FUV echelle improvements benefit the faint source sensitivity and high-resolution performance of future UV observatories. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Comments: 21 pages, 13 figures, Accepted into Applied Optics

The MeerTime Pulsar Timing Array -- A Census of Emission Properties and Timing Potential

Authors: R. Spiewak, M. Bailes, M. T. Miles, A. Parthasarathy, D. J. Reardon, M. Shamohammadi, R. M. Shannon, N. D. R. Bhat, S. Buchner, A. D. Cameron, F. Camilo, M. Geyer, S. Johnston, A. Karastergiou, M. Keith, M. Kramer, M. Serylak, W. van Straten, G. Theureau, V. Venkatraman Krishnan

Abstract: MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing A… ▽ More MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing Array (IPTA). In order to plan for the remainder of the programme and to use the allocated time most efficiently, we have conducted an initial census with the MeerKAT "L-band" receiver of 189 MSPs visible to MeerKAT and here present their dispersion measures, polarization profiles, polarization fractions, rotation measures, flux density measurements, spectral indices, and timing potential. As all of these observations are taken with the same instrument (which uses coherent dedispersion, interferometric polarization calibration techniques, and a uniform flux scale), they present an excellent resource for population studies. We used wideband pulse portraits as timing standards for each MSP and demonstrated that the MeerTime Pulsar Timing Array (MPTA) can already contribute significantly to the IPTA as it currently achieves better than 1 $μ$s timing accuracy on 89 MSPs (observed with fortnightly cadence). By the conclusion of the initial five-year MeerTime programme in July 2024, the MPTA will be extremely significant in global efforts to detect the gravitational wave background with a contribution to the detection statistic comparable to other long-standing timing programmes. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: Accepted to PASA. 27 figures. Data to be made available under the DOI 10.5281/zenodo.5347875 at the time of publication

A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs

Authors: Jake A. McCoy, Ted B. Schultz, James H. Tutt, Thomas Rogers, Drew M. Miles, Randall L. McEntaffer

Abstract: Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detector… ▽ More Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 16 pages, 11 pages (also published as a 2015 SPIE conference proceeding)

Journal ref: Journal of Astronomical Instrumentation | Vol. 05, No. 01, 1640002 (2016) | Special Issue - Solar and Astrophysical Sounding Rockets and Instrumentation; Guest Editors: Steven Christe and Ben Zeiger

Daily milk yield correction factors: what are they?

Authors: Xiao-Lin Wu, George Wiggans, H. Duane Norman, Asha M. Miles, Curt Van Tassell, Ransom L. Baldwin VI, Javier Burchard, Joao Durr

Abstract: Cows are typically milked two or more times on a test day, but not all these milkings are sampled and weighed. Statistical methods have been proposed to estimate daily yields in dairy cows, centering on various yield correction factors in two broad categories. The initial approach estimated a test-day yield with doubled morning (AM) or evening (PM) yield in the AM-PM milking plans, assuming equal… ▽ More Cows are typically milked two or more times on a test day, but not all these milkings are sampled and weighed. Statistical methods have been proposed to estimate daily yields in dairy cows, centering on various yield correction factors in two broad categories. The initial approach estimated a test-day yield with doubled morning (AM) or evening (PM) yield in the AM-PM milking plans, assuming equal AM and PM milking intervals. However, AM and PM milking intervals can vary, and milk secretion rates may be different between day and night. Additive correction factors (ACF) are evaluated by the average differences between AM and PM milk yield for various milking interval classes (MIC). We show that an ACF model is equivalent to a regression model of daily yield on categorical regressor variables, and a continuous variable for AM or PM yield with a fixed regression coefficient. Similarly, a linear regression model can be implemented as an ACF model with the regression coefficient for AM or PM yield estimated from the data. Multiplicative correction factors (MCF) are ratio of daily yield to yield from single milkings, but their statistical interpretations vary. Overall, MCF were more accurate for estimating daily milk yield than ACF. MCF have biological and statistical challenges. An exponential regression model was proposed as an alternative model for estimating daily milk yield, which improved the accuracy in the present study. Characterization of ACF and MCF showed how ACF and MCF improved the accuracy compared to doubling AM or PM yield as the daily milk yield. The methods were explicitly described to estimate daily milk yield in AM and PM milking plans. Still, the principles are generally applicable to cows milked more than two times a day, and they apply similarly to the estimation of daily fat and protein yields with some necessary modifications. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Comments: 14 pages, 2 tables, and 1 figure

Mode changing in J1909$-$3744: the most precisely timed pulsar

Authors: Matthew T. Miles, Ryan M. Shannon, Matthew Bailes, Daniel J. Reardon, Sarah Buchner, Hannah Middleton, Renee Spiewak

Abstract: We present baseband radio observations of the millisecond pulsar J1909$-$3744, the most precisely timed pulsar, using the MeerKAT telescope as part of the MeerTime pulsar timing array campaign. During a particularly bright scintillation event the pulsar showed strong evidence of pulse mode changing, among the first millisecond pulsars and the shortest duty cycle millisecond pulsar to do so. Two mo… ▽ More We present baseband radio observations of the millisecond pulsar J1909$-$3744, the most precisely timed pulsar, using the MeerKAT telescope as part of the MeerTime pulsar timing array campaign. During a particularly bright scintillation event the pulsar showed strong evidence of pulse mode changing, among the first millisecond pulsars and the shortest duty cycle millisecond pulsar to do so. Two modes appear to be present, with the weak (lower signal-to-noise ratio) mode arriving $9.26$ $\pm 3.94$ $μ$s earlier than the strong counterpart. Further, we present a new value of the jitter noise for this pulsar of $8.20 \pm 0.14$ ns in one hour, finding it to be consistent with previous measurements taken with the MeerKAT ($9 \pm 3$ ns) and Parkes ($8.6 \pm 0.8$ ns) telescopes, but inconsistent with the previously most precise measurement taken with the Green Bank telescope ($14 \pm 0.5$ ns). Timing analysis on the individual modes is carried out for this pulsar, and we find an approximate $10\%$ improvement in the timing precision is achievable through timing the strong mode only as opposed to the full sample of pulses. By forming a model of the average pulse from templates of the two modes, we time them simultaneously and demonstrate that this timing improvement can also be achieved in regular timing observations. We discuss the impact an improvement of this degree on this pulsar would have on searches for the stochastic gravitational wave background, as well as the impact of a similar improvement on all MeerTime PTA pulsars. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Multi-Agent Autonomy: Advancements and Challenges in Subterranean Exploration

Authors: Michael T. Ohradzansky, Eugene R. Rush, Danny G. Riley, Andrew B. Mills, Shakeeb Ahmad, Steve McGuire, Harel Biggie, Kyle Harlow, Michael J. Miles, Eric W. Frew, Christoffer Heckman, J. Sean Humbert

Abstract: Artificial intelligence has undergone immense growth and maturation in recent years, though autonomous systems have traditionally struggled when fielded in diverse and previously unknown environments. DARPA is seeking to change that with the Subterranean Challenge, by providing roboticists the opportunity to support civilian and military first responders in complex and high-risk underground scenar… ▽ More Artificial intelligence has undergone immense growth and maturation in recent years, though autonomous systems have traditionally struggled when fielded in diverse and previously unknown environments. DARPA is seeking to change that with the Subterranean Challenge, by providing roboticists the opportunity to support civilian and military first responders in complex and high-risk underground scenarios. The subterranean domain presents a handful of challenges, such as limited communication, diverse topology and terrain, and degraded sensing. Team MARBLE proposes a solution for autonomous exploration of unknown subterranean environments in which coordinated agents search for artifacts of interest. The team presents two navigation algorithms in the form of a metric-topological graph-based planner and a continuous frontier-based planner. To facilitate multi-agent coordination, agents share and merge new map information and candidate goal-points. Agents deploy communication beacons at different points in the environment, extending the range at which maps and other information can be shared. Onboard autonomy reduces the load on human supervisors, allowing agents to detect and localize artifacts and explore autonomously outside established communication networks. Given the scale, complexity, and tempo of this challenge, a range of lessons were learned, most importantly, that frequent and comprehensive field testing in representative environments is key to rapidly refining system performance. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Comments: 39 pages, 21 figures, Field Robotics special issue: Advancements and lessons learned during Phase I & II of the DARPA Subterranean Challenge

On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array

Authors: Boris Goncharov, R. M. Shannon, D. J. Reardon, G. Hobbs, A. Zic, M. Bailes, M. Curylo, S. Dai, M. Kerr, M. E. Lower, R. N. Manchester, R. Mandow, H. Middleton, M. T. Miles, A. Parthasarathy, E. Thrane, N. Thyagarajan, X. Xue, X. J. Zhu, A. D. Cameron, Y. Feng, R. Luo, C. J. Russell, J. Sarkissian, R. Spiewak , et al. (4 additional authors not shown)

Abstract: A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Wa… ▽ More A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background. △ Less

Submitted 11 August, 2021; v1 submitted 26 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Journal ref: The Astrophysical Journal Letters, Volume 917, Number 2 (2021)

X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating

Authors: Jake A. McCoy, Marc A. Verschuuren, Drew M. Miles, Randall L. McEntaffer

Abstract: Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas… ▽ More Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a $\sim$160-nm-period grating replica cured at 90$^{\circ}$C. Results demonstrate a $\sim$2$^{\circ}$ reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in $\langle 311 \rangle$-oriented silicon to yield a facet angle close to 30$^{\circ}$. △ Less

Submitted 27 October, 2020; originally announced November 2020.

Comments: 17 pages, 11 figures

REX: X-ray experiment on the Water Recovery Rocket

Authors: Martin Urban, Ondrej Nentvich, Tomas Baca, Ivo Vertat, Veronika Marsikova, Daniela Doubravova, Vladimir Daniel, Adolf Inneman, Ladisla Pina, Randall L. McEntaffer, Ted B. Schultz, Drew M. Miles, James H. Tutt

Abstract: This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices design… ▽ More This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices designed for space applications. The devices were two wide-field X-ray telescopes consisting of a combination of Lobster-Eye (LE) optics with an uncooled Timepix detector (256 x 256 px @ 55 um), and additional sensors. The first telescope uses a two-dimensional combination of LE modules with a focal length of 1 m and a Field of View (FOV) of 1.0 x 1.2 deg and operates in the energy range of 3 - 60 keV. The second telescope was a one-dimensional LE with a focal length of 250 mm and a FOV of 2.7 x 8.0 deg for the energy range 3 - 40 keV. The X-ray telescopes were supplemented by a camera in the visible spectrum with 1,280 x 1,024 px resolution, which was used to obtain images of the observed sources and to verify the resulting pointing of the rocket carrier. Other devices also include infrared array sensors and inertial measurement units tested for future small satellite missions. The data handler and communication system were built using the Robot Operating System, and both the system and the electronics were deployed and operated in flight. The hardware was successfully recovered after the launch and the data were extracted. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Comments: Submitted to Acta Astronautica

Neutron Star Extreme Matter Observatory: A kilohertz-band gravitational-wave detector in the global network

Authors: K. Ackley, V. B. Adya, P. Agrawal, P. Altin, G. Ashton, M. Bailes, E. Baltinas, A. Barbuio, D. Beniwal, C. Blair, D. Blair, G. N. Bolingbroke, V. Bossilkov, S. Shachar Boublil, D. D. Brown, B. J. Burridge, J. Calderon Bustillo, J. Cameron, H. Tuong Cao, J. B. Carlin, S. Chang, P. Charlton, C. Chatterjee, D. Chattopadhyay, X. Chen , et al. (139 additional authors not shown)

Abstract: Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provid… ▽ More Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2-4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a neutron star extreme matter observatory (NEMO): a gravitational-wave interferometer optimized to study nuclear physics with merging neutron stars. The concept uses high circulating laser power, quantum squeezing and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above one kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year, and potentially allows for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica. △ Less

Submitted 5 November, 2020; v1 submitted 6 July, 2020; originally announced July 2020.

Comments: Accepted for publication in PASA

Journal ref: PASA (2020) 37, e047

Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration

Authors: Jake A. McCoy, Randall L. McEntaffer, Drew M. Miles

Abstract: Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratin… ▽ More Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Comments: 19 pages, 16 figures

Discovery of s-process enhanced stars in the LAMOST survey

Authors: Brodie J Norfolk, Andrew R Casey, Amanda I Karakas, Matthew T Miles, Alex J Kemp, Kevin C Schlaufman, Melissa Ness, Anna Y Q Ho, John C Lattanzio, Alexander P Ji

Abstract: Here we present the discovery of 895 s-process-rich candidates from 454,180 giant stars observed by the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST) using a data-driven approach. This sample constitutes the largest number of s-process enhanced stars ever discovered. Our sample includes 187 s-process-rich candidates that are enhanced in both barium and strontium, 49 stars with… ▽ More Here we present the discovery of 895 s-process-rich candidates from 454,180 giant stars observed by the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST) using a data-driven approach. This sample constitutes the largest number of s-process enhanced stars ever discovered. Our sample includes 187 s-process-rich candidates that are enhanced in both barium and strontium, 49 stars with significant barium enhancement only and 659 stars that show only a strontium enhancement. Most of the stars in our sample are in the range of effective temperature and log g typical of red giant branch (RGB) populations, which is consistent with our observational selection bias towards finding RGB stars. We estimate that only a small fraction (0.5 per cent) of binary configurations are favourable for s-process enriched stars. The majority of our s-process-rich candidates (95 per cent) show strong carbon enhancements, whereas only five candidates (less than 3 percent) show evidence of sodium enhancement. Our kinematic analysis reveals that 97 percent of our sample are disc stars, with the other 3 percent showing velocities consistent with the Galactic halo. The scaleheight of the disc is estimated to be zh=0.634kpc, comparable with values in the literature. A comparison with the yields from asymptotic giant branch (AGB) models suggests that the main neutron source responsible for the Ba and Sr enhancements is the 13C(alpha,n)16O reaction. We conclude that the s-process-rich candidates may have received their overabundances via mass transfer from a previous ABG companion with an initial mass in the range 1-3Msun. △ Less

Submitted 31 October, 2019; originally announced November 2019.

Comments: 9 pages, 6 figures

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 490, Issue 2, December 2019, Pages 2219-2227

HaloSat -- A CubeSat to Study the Hot Galactic Halo

Authors: P. Kaaret, A. Zajczyk, D. M. LaRocca, R. Ringuette, J. Bluem, W. Fuelberth, H. Gulick, K. Jahoda, T. E. Johnson, D. L. Kirchner, D. Koutroumpa, K. D. Kuntz, R. McCurdy, D. M. Miles, W. T. Robison, E. M. Silich

Abstract: HaloSat is a small satellite (CubeSat) designed to map soft X-ray oxygen line emission across the sky in order to constrain the mass and spatial distribution of hot gas in the Milky Way. The goal of HaloSat is to help determine if hot gas gravitationally bound to individual galaxies makes a significant contribution to the cosmological baryon budget. HaloSat was deployed from the International Spac… ▽ More HaloSat is a small satellite (CubeSat) designed to map soft X-ray oxygen line emission across the sky in order to constrain the mass and spatial distribution of hot gas in the Milky Way. The goal of HaloSat is to help determine if hot gas gravitationally bound to individual galaxies makes a significant contribution to the cosmological baryon budget. HaloSat was deployed from the International Space Station in July 2018 and began routine science operations in October 2018. We describe the goals and design of the mission, the on-orbit performance of the science instrument, and initial observations. △ Less

Submitted 16 October, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: to appear in the Astrophysical Journal, 11 pages corrected arXiv author list

On the discovery of K-enhanced and possibly Mg-depleted stars throughout the Milky Way

Authors: Alex J. Kemp, Andrew R. Casey, Matthew T. Miles, Brodie J. Norfolk, John C. Lattanzio, Amanda I. Karakas, Kevin C. Schlaufman, Anna Y. Q. Ho, Christopher A. Tout, Melissa Ness, Alexander P. Ji

Abstract: Stars with unusual elemental abundances offer clues about rare astrophysical events or nucleosynthetic pathways. Stars with significantly depleted magnesium and enhanced potassium ([Mg/Fe] < -0.5; [K/Fe] > 1) have to date only been found in the massive globular cluster NGC 2419 and, to a lesser extent, NGC 2808. The origin of this abundance signature remains unknown, as does the reason for its app… ▽ More Stars with unusual elemental abundances offer clues about rare astrophysical events or nucleosynthetic pathways. Stars with significantly depleted magnesium and enhanced potassium ([Mg/Fe] < -0.5; [K/Fe] > 1) have to date only been found in the massive globular cluster NGC 2419 and, to a lesser extent, NGC 2808. The origin of this abundance signature remains unknown, as does the reason for its apparent exclusivity to these two globular clusters. Here we present 112 field stars, identified from 454,180 LAMOST giants, that show significantly enhanced [K/Fe] and possibly depleted [Mg/Fe] abundance ratios. Our sample spans a wide range of metallicities (-1.5 < [Fe/H] < 0.3), yet none show abundance ratios of [K/Fe] or [Mg/Fe] that are as extreme as those observed in NGC 2419. If confirmed, the identified sample of stars represents evidence that the nucleosynthetic process producing the anomalous abundances ratios of [K/Fe] and [Mg/Fe] probably occurs at a wide range of metallicities. This would suggest that pollution scenarios that are limited to early epochs (such as Population III supernovae) are an unlikely explanation, although they cannot be ruled out entirely. This sample is expected to help guide modelling attempts to explain the origin of the Mg-K abundance signature. △ Less

Submitted 16 July, 2018; originally announced July 2018.

Low-altitude ion heating, downflowing ions, and BBELF waves in the return current region

Authors: Yangyang Shen, David J. Knudsen, Johnathan K. Burchill, Andrew D. Howarth, Andrew W. Yau, David M. Miles, H. Gordon James, Gareth W. Perry, Leroy Cogger

Abstract: Heavy (O+) ion energization and field-aligned motion in and near the ionosphere are still not well understood. Based on observations from the CASSIOPE Enhanced Polar Outflow Probe (e-POP) at altitudes between 325 km and 730 km over one year, we present a statistical study (24 events) of ion heating and its relation to field-aligned ion bulk flow velocity, low-frequency waves and field-aligned curr… ▽ More Heavy (O+) ion energization and field-aligned motion in and near the ionosphere are still not well understood. Based on observations from the CASSIOPE Enhanced Polar Outflow Probe (e-POP) at altitudes between 325 km and 730 km over one year, we present a statistical study (24 events) of ion heating and its relation to field-aligned ion bulk flow velocity, low-frequency waves and field-aligned currents (FACs). The ion temperature and field-aligned bulk flow velocity are derived from 2-D ion velocity distribution functions measured by the suprathermal electron imager (SEI) instrument. Consistent ion heating and flow velocity characteristics are observed from both the SEI and the rapid-scanning ion mass spectrometer (IRM) instruments. We find that transverse O+ ion heating in the ionosphere can be intense (up to 4.5 eV), confined to very narrow regions (~ 2 km across B), is more likely to occur in the downward current region, and is associated with broadband extremely low frequency (BBELF) waves. These waves are interpreted as linearly polarized perpendicular to the magnetic field. The amount of ion heating cannot be explained by frictional heating, and the correlation of ion heating with BBELF waves suggest that significant wave-ion heating is occurring and even dominating at altitudes as low as 350 km, a boundary that is lower than previously reported. Surprisingly, the majority of these heating events (17 out 24) are associated with core ion downflows rather than upflows. This may be explained by a downward-pointing electric field in the low-altitude return current region. △ Less

Submitted 10 March, 2018; originally announced March 2018.

Comments: 17 pages, including 12 figures, 1 table, accepted by JGR-Space Physics

Swarm in situ observations of F region polar cap patches created by cusp precipitation

Authors: L. V. Goodwin, B. Iserhienrhien, D. M. Miles, S. Patra, C. van der Meeren, S. C. Buchert, J. K. Burchill, L. B. N. Clausen, D. J. Knudsen, K. A. McWilliams, J. Moen

Abstract: High-resolution in situ measurements from the three Swarm spacecraft, in a string-of-pearls configuration, provide new insights about the combined role of flow channel events and particle impact ionization in creating $\textit{F}$ region electron density structures in the northern Scandinavian dayside cusp. We present a case of polar cap patch formation where a reconnection-driven low-density rela… ▽ More High-resolution in situ measurements from the three Swarm spacecraft, in a string-of-pearls configuration, provide new insights about the combined role of flow channel events and particle impact ionization in creating $\textit{F}$ region electron density structures in the northern Scandinavian dayside cusp. We present a case of polar cap patch formation where a reconnection-driven low-density relative westward flow channel is eroding the dayside solar-ionized plasma but where particle impact ionization in the cusp dominates the initial plasma structuring. In the cusp, density features are observed which are twice as dense as the solar-ionized background. These features then follow the polar cap convection and become less structured and lower in amplitude. These are the first in situ observations tracking polar cap patch evolution from creation by plasma transport and enhancement by cusp precipitation, through entrainment in the polar cap flow and relaxation into smooth patches as they approach the nightside auroral oval. △ Less

Submitted 7 June, 2016; originally announced June 2016.

Line Spread Functions of Blazed Off-Plane Gratings Operated in the Littrow Mounting

Authors: Casey T. DeRoo, Randall L. McEntaffer, Drew M. Miles, Thomas J. Peterson, Hannah Marlowe, James H. Tutt, Benjamin D. Donovan, Benedikt Menz, Vadim Burwitz, Gisela Hartner, Ryan Allured, Randall K. Smith, Ramses Gunther, Alex Yanson, Giuseppe Vacanti, Marcelo Ackermann

Abstract: Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be… ▽ More Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders. △ Less

Submitted 15 March, 2016; originally announced March 2016.

Comments: 25 pages including references

Performance Testing of a Novel Off-plane Reflection Grating and Silicon Pore Optic Spectrograph at PANTER

Authors: Hannah Marlowe, Randall L. McEntaffer, Ryan Allured, Casey DeRoo, Drew M. Miles, Benjamin D. Donovan, James H. Tutt, Vadim Burwitz, Benedikt Menz, Gisela D. Hartner, Randall K. Smith, Ramses Günther, Alex Yanson, Giuseppe Vacanti, Marcelo Ackermann

Abstract: An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane… ▽ More An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development. △ Less

Submitted 19 March, 2015; originally announced March 2015.

Comments: Draft Version March 19, 2015

Genetic Complexity in a Drosophila Model of Diabetes-Associated Misfolded Human Proinsulin

Authors: Soo-Young Park, Michael Z. Ludwig, Natalia A. Tamarina, Bin Z. He, Sarah H. Carl, Desiree A. Dickerson, Levi Barse, Bharath Arun, Calvin Williams, Cecelia M. Miles, Louis H. Philipson, Donald F. Steiner, Graeme I. Bell, Martin Kreitman

Abstract: Here we use Drosophila melanogaster to create a genetic model of human permanent neonatal diabetes mellitus and present experimental results describing dimensions of this complexity. The approach involves the transgenic expression of a misfolded mutant of human preproinsulin, hINSC96Y, which is a cause of the disease. When expressed in fly imaginal discs, hINSC96Y causes a reduction of adult struc… ▽ More Here we use Drosophila melanogaster to create a genetic model of human permanent neonatal diabetes mellitus and present experimental results describing dimensions of this complexity. The approach involves the transgenic expression of a misfolded mutant of human preproinsulin, hINSC96Y, which is a cause of the disease. When expressed in fly imaginal discs, hINSC96Y causes a reduction of adult structures, including the eye, wing and notum. Eye imaginal discs exhibit defects in both the structure and arrangement of ommatidia. In the wing, expression of hINSC96Y leads to ectopic expression of veins and mechano-sensory organs, indicating disruption of wild type signaling processes regulating cell fates. These readily measurable disease phenotypes are sensitive to temperature, gene dose and sex. Mutant (but not wild type) proinsulin expression in the eye imaginal disc induces IRE1-mediated Xbp1 alternative splicing, a signal for endoplasmic reticulum stress response activation, and produces global change in gene expression. Mutant hINS transgene tester strains, when crossed to stocks from the Drosophila Genetic Reference Panel produces F1 adults with a continuous range of disease phenotypes and large broad-sense heritability. Surprisingly, the severity of mutant hINS-induced disease in the eye is not correlated with that in the notum in these crosses, nor with eye reduction phenotypes caused by the expression of two dominant eye mutants acting in two different eye development pathways, Drop (Dr) or Lobe (L) when crossed into the same genetic backgrounds. The tissue specificity of genetic variability for mutant hINS-induced disease thus has its own distinct signature. The genetic dominance of disease-specific phenotypic variability makes this approach amenable to genome-wide association study (GWAS) in a simple F1 screen of natural variation. △ Less

Submitted 31 May, 2013; originally announced June 2013.

Comments: 60 pages; 6 figures; 8 supporting figures; 11 supporting tables

Turbulence energetics in stably stratified geophysical flows: strong and weak mixing regimes

Authors: S. S. Zilitinkevich, T. Elperin, N. Kleeorin, I. Rogachevskii, I. Esau, T. Mauritsen, M. W. Miles

Abstract: Traditionally, turbulence energetics is characterized by turbulent kinetic energy (TKE) and modelled using solely the TKE budget equation. In stable stratification, TKE is generated by the velocity shear and expended through viscous dissipation and work against buoyancy forces. The effect of stratification is characterized by the ratio of the buoyancy gradient to squared shear, called Richardson… ▽ More Traditionally, turbulence energetics is characterized by turbulent kinetic energy (TKE) and modelled using solely the TKE budget equation. In stable stratification, TKE is generated by the velocity shear and expended through viscous dissipation and work against buoyancy forces. The effect of stratification is characterized by the ratio of the buoyancy gradient to squared shear, called Richardson number, Ri. It is widely believed that at Ri exceeding a critical value, Ric, local shear cannot maintain turbulence, and the flow becomes laminar. We revise this concept by extending the energy analysis to turbulent potential and total energies (TPE and TTE = TKE + TPE), consider their budget equations, and conclude that TTE is a conservative parameter maintained by shear in any stratification. Hence there is no "energetics Ric", in contrast to the hydrodynamic-instability threshold, Ric-instability, whose typical values vary from 0.25 to 1. We demonstrate that this interval, 0.25<Ri<1, separates two different turbulent regimes: strong mixing and weak mixing rather than the turbulent and the laminar regimes, as the classical concept states. This explains persistent occurrence of turbulence in the free atmosphere and deep ocean at Ri>>1, clarify principal difference between turbulent boundary layers and free flows, and provide basis for improving operational turbulence closure models. △ Less

Submitted 11 July, 2008; originally announced July 2008.

Comments: 23 pages, 4 figures, Quarterly Journal of Royal Meteorological Society, in press

Journal ref: Quarterly Journal of Royal Meteorological Society 134, 793-799 (2008)