-
Error evaluation of partial scattering functions obtained from contrast variation small-angle neutron scattering
Authors:
Koichi Mayumi,
Tatsuro Oda,
Shinya Miyajima,
Ippei Obayashi,
Kazuaki Tanaka
Abstract:
Contrast variation small-angle neutron scattering (CV-SANS) is a powerful tool to evaluate the structure of multi-component systems by decomposing scattering intensities $I$ measured with different scattering contrasts into partial scattering functions $S$ of self- and cross-correlations between components. The measured $I$ contains a measurement error, $ΔI$, and $ΔI$ results in an uncertainty of…
▽ More
Contrast variation small-angle neutron scattering (CV-SANS) is a powerful tool to evaluate the structure of multi-component systems by decomposing scattering intensities $I$ measured with different scattering contrasts into partial scattering functions $S$ of self- and cross-correlations between components. The measured $I$ contains a measurement error, $ΔI$, and $ΔI$ results in an uncertainty of partial scattering functions, $ΔS$. However, the error propagation from $ΔI$ to $ΔS$ has not been quantitatively clarified. In this work, we have established deterministic and statistical approaches to determine $ΔS$ from $ΔI$. We have applied the two methods to (i) computational data of a core-shell sphere and experimental CV-SANS data of (ii) clay/polyethylene glycol (PEG) aqueous solutions and (iii) polyrotaxane solutions, and have successfully estimated the errors of \(S\). The quantitative error estimation of \(S\) offers us a strategy to optimize the combination of scattering contrasts to minimize error propagation.
△ Less
Submitted 24 March, 2025; v1 submitted 1 June, 2024;
originally announced June 2024.
-
Phantom-Chain Simulations for the Effect of Node Functionality on the Fracture of Star-Polymer Networks
Authors:
Yuichi Masubuchi,
Yuya Doi,
Takato Ishida,
Naoyuki Sakumichi,
Takamasa Sakai,
Koichi Mayumi,
Kotaro Sato,
Takashi Uneyama
Abstract:
The influence of node functionality (f) on the fracture of polymer networks remains unclear. While many studies have focused on multi-functional nodes with f>4, recent research suggests that networks with f=3 exhibit superior fracture properties compared to those with f=4. To clarify this discrepancy, we conducted phantom chain simulations for star-polymer networks varying f between 3 and 8. Our s…
▽ More
The influence of node functionality (f) on the fracture of polymer networks remains unclear. While many studies have focused on multi-functional nodes with f>4, recent research suggests that networks with f=3 exhibit superior fracture properties compared to those with f=4. To clarify this discrepancy, we conducted phantom chain simulations for star-polymer networks varying f between 3 and 8. Our simulations utilized equimolar binary mixtures of star branch prepolymers with a uniform arm length. We employed a Brownian dynamics scheme to equilibrate sols and induce gelation through end-linking reactions. We prevented the formation of odd-order loops owing to the binary reaction and second-order loops algorithmically. We stored network structures at various conversion ratios (φ_c) and minimized energy to reduce computation costs induced by structural relaxation. We subjected the networks to stretching until fracture to determine stress and strain at break and work for fracture, ε_b, σ_b, and W_b. These fracture characteristics are highly dependent on φ_c for networks with small f but relatively insensitive for those with large f. Thus, the networks with small f exhibit greater fracture properties than those with large f at high φ_c, whereas the opposite relationship occurs at low φ_c. We analyzed ε_b, σ_b, and W_b concerning the cycle rank ξ and the broken strand fraction φ_bb. We found ε_b, σ_b/φ_bb, and W_b/φ_bb monotonically decrease with increasing ξ, and the data for various f and φ_c superpose with each other to draw master curves. These results imply that the mechanical superiority of the networks with small f comes from their smaller ξ that gives higher ε_b, σ_b/φ_bb, and W_b/φ_bb than the networks with large f.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Tri-branched gels: Rubbery materials with the lowest branching factor approach the ideal elastic limit
Authors:
Takeshi Fujiyabu,
Naoyuki Sakumichi,
Takuya Katashima,
Chang Liu,
Koichi Mayumi,
Ung-il Chung,
Takamasa Sakai
Abstract:
Unlike hard materials such as metals and ceramics, rubbery materials can endure large deformations due to the large conformational degree of freedom of the crosslinked three-dimensional polymer network. However, the effect of the branching factor of the network on the ultimate mechanical properties of rubbery materials has not yet been clarified. This study shows that tri-branching, which entails…
▽ More
Unlike hard materials such as metals and ceramics, rubbery materials can endure large deformations due to the large conformational degree of freedom of the crosslinked three-dimensional polymer network. However, the effect of the branching factor of the network on the ultimate mechanical properties of rubbery materials has not yet been clarified. This study shows that tri-branching, which entails the lowest branching factor, results in a large elastic deformation near the theoretical upper bound. This ideal elastic limit is realized by reversible strain-induced crystallization, providing on-demand reinforcement. The findings indicate that the polymer chain is highly orientated along the stretching axis, whereat enhanced reversible strain-induced crystallization is observed in the tri-branched and not in the tetra-branched network. A mathematical theory of structural rigidity is used to explain the difference in the chain orientation. Although tetra-branched polymers have been preferred since the development of vulcanization, these findings highlighting the merits of tri-branching will prompt a paradigm shift in the development of rubbery materials.
△ Less
Submitted 20 April, 2022; v1 submitted 25 June, 2021;
originally announced June 2021.
-
Damageless Tough Hydrogels with On-demand Self-reinforcement
Authors:
Chang Liu,
Takeshi Fujiyabu,
Naoya Morimoto,
Lan Jiang,
Hideaki Yokoyama,
Takamasa Sakai,
Koichi Mayumi,
Kohzo Ito
Abstract:
Most tough hydrogels are reinforced by introducing sacrificial structures that can dissipate input energy. However, since the sacrificial damages cannot recover instantly, the toughness of these gels drops substantially during consecutive cyclic loadings. Here, we propose a new damageless reinforcement strategy for hydrogels utilizing strain-induced crystallization (SIC). In Slide-Ring (SR) gels w…
▽ More
Most tough hydrogels are reinforced by introducing sacrificial structures that can dissipate input energy. However, since the sacrificial damages cannot recover instantly, the toughness of these gels drops substantially during consecutive cyclic loadings. Here, we propose a new damageless reinforcement strategy for hydrogels utilizing strain-induced crystallization (SIC). In Slide-Ring (SR) gels with freely movable cross-links, crystalline repetitively forms and destructs with elongation and relaxation, resulting in both excellent toughness of 5.5 - 25.2 MJ/m$^3$ and 87% - 95% instant recovery of extension energy between two consecutive 11-fold loading-unloading cycles. Moreover, SIC occurs "on-demandly" at the crack-tip area where strain amplification and stress concentration take place and forces the crack to turn sideways. The instantly reversible tough hydrogels are promising candidates for applications in artificial connective tissues such as tendon and ligament.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Fracture of dual crosslink gels with permanent and transient crosslinks
Authors:
Koichi Mayumi,
Jingyi Guo,
Tetsuharu Narita,
Chung Yuen,
Costantino Creton
Abstract:
We have carried out systematic fracture experiments in a single edge notch geometry over a range of stretch rates on dual crosslink hydrogels made from polyvinyl alcohol chains chemically crosslinked with glutaraldehyde and physically crosslinked with borate ions. If the energy release rate necessary for crack propagation was calculated conventionally, by using the work done to deform the sample t…
▽ More
We have carried out systematic fracture experiments in a single edge notch geometry over a range of stretch rates on dual crosslink hydrogels made from polyvinyl alcohol chains chemically crosslinked with glutaraldehyde and physically crosslinked with borate ions. If the energy release rate necessary for crack propagation was calculated conventionally, by using the work done to deform the sample to the critical value of stretch $λ_c$ where the crack propagates, we found that the fracture energy $Γ$ peaks around $λ\sim 0.001 s^{-1}$ before decreasing sharply with increasing stretch rate, in contradiction with the measurements of crack velocity. Combining simulations and experimental observations, we propose therefore here a general method to separate the energy dissipated during loading before crack propagation, from that which is dissipated during crack propagation. For fast loading rates (with a characteristic strain rate only slightly lower than the inverse of the typical breaking time of physical bonds), this improved method to estimate a local energy release rate $g_{local}$ at the onset of crack propagation, gives a value of the local fracture energy $Γ_{local}$ which is constant, consistent with the constant value of the crack propagation velocity measured experimentally. Using this improved method we also obtain the very interesting result that the dual crosslink gels have a much higher value of fracture energy at low loading rates than at high loading rates, contrary to the situation in classical chemically crosslinked elastic networks.
△ Less
Submitted 29 June, 2016;
originally announced June 2016.
