-
Predictive Mapping of Spectral Signatures from RGB Imagery for Off-Road Terrain Analysis
Authors:
Sarvesh Prajapati,
Ananya Trivedi,
Bruce Maxwell,
Taskin Padir
Abstract:
Accurate identification of complex terrain characteristics, such as soil composition and coefficient of friction, is essential for model-based planning and control of mobile robots in off-road environments. Spectral signatures leverage distinct patterns of light absorption and reflection to identify various materials, enabling precise characterization of their inherent properties. Recent research…
▽ More
Accurate identification of complex terrain characteristics, such as soil composition and coefficient of friction, is essential for model-based planning and control of mobile robots in off-road environments. Spectral signatures leverage distinct patterns of light absorption and reflection to identify various materials, enabling precise characterization of their inherent properties. Recent research in robotics has explored the adoption of spectroscopy to enhance perception and interaction with environments. However, the significant cost and elaborate setup required for mounting these sensors present formidable barriers to widespread adoption. In this study, we introduce RS-Net (RGB to Spectral Network), a deep neural network architecture designed to map RGB images to corresponding spectral signatures. We illustrate how RS-Net can be synergistically combined with Co-Learning techniques for terrain property estimation. Initial results demonstrate the effectiveness of this approach in characterizing spectral signatures across an extensive off-road real-world dataset. These findings highlight the feasibility of terrain property estimation using only RGB cameras.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Using Texture to Classify Forests Separately from Vegetation
Authors:
David R. Treadwell IV,
Derek Jacoby,
Will Parkinson,
Bruce Maxwell,
Yvonne Coady
Abstract:
Identifying terrain within satellite image data is a key issue in geographical information sciences, with numerous environmental and safety implications. Many techniques exist to derive classifications from spectral data captured by satellites. However, the ability to reliably classify vegetation remains a challenge. In particular, no precise methods exist for classifying forest vs. non-forest veg…
▽ More
Identifying terrain within satellite image data is a key issue in geographical information sciences, with numerous environmental and safety implications. Many techniques exist to derive classifications from spectral data captured by satellites. However, the ability to reliably classify vegetation remains a challenge. In particular, no precise methods exist for classifying forest vs. non-forest vegetation in high-level satellite images. This paper provides an initial proposal for a static, algorithmic process to identify forest regions in satellite image data through texture features created from detected edges and the NDVI ratio captured by Sentinel-2 satellite images. With strong initial results, this paper also identifies the next steps to improve the accuracy of the classification and verification processes.
△ Less
Submitted 29 August, 2024; v1 submitted 30 April, 2024;
originally announced May 2024.
-
On the role of transverse detonation waves in the re-establishment of attenuated detonations in methane-oxygen
Authors:
Grace Floring,
Mohnish Peswani,
Brian Maxwell
Abstract:
The problem of detonation attenuation in stoichiometric methane-oxygen and its re-establishment following its interaction with obstacles was investigated using high resolution numerical simulation. The main focus was on the role of the transverse detonation on the re-establishment of the detonation wave. We applied an efficient thermochemically derived four-step global combustion model using an Eu…
▽ More
The problem of detonation attenuation in stoichiometric methane-oxygen and its re-establishment following its interaction with obstacles was investigated using high resolution numerical simulation. The main focus was on the role of the transverse detonation on the re-establishment of the detonation wave. We applied an efficient thermochemically derived four-step global combustion model using an Euler simulation framework to investigate the critical regimes present. While past attempts at using one- or two- step models have failed to capture transverse detonations, for this scenario, our simulations have demonstrated that the four-step combustion model is able to capture this feature. We suggest that to correctly model detonation re-initiation in characteristically unstable mixtures, an applied combustion model should contain at least an adequate description to permit the correct ignition and state variable response when changes in temperature and pressure occur. Our simulations reveal that there is a relationship between the critical outcomes possible and the mixture cell size, and while pockets of unburned gas may exist when a detonation re-initiates, it is not the direct rapid consumption of these pockets that gives rise to transverse detonations. Instead, the transverse detonations are initiated through pressure amplification of reaction zones at burned/unburned gas interfaces whose combustion rates have been enhanced through Richmyer-Meshkov instabilities associated with the passing of transverse shock waves, or by spontaneous ignition of hot spots, which can form into detonations through the Zel'dovich gradient mechanism. In both situations, non-uniform ignition delay times are found to play a role. Finally, we found that the transverse detonations are in fact Chapman-Jouguet detonations, but whose presence contributes to overdriving the re-initiated detonation along the Mach stem.
△ Less
Submitted 31 October, 2022;
originally announced November 2022.
-
Effect of boundary layer losses on 2D detonation cellular structures
Authors:
Qiang Xiao,
Aliou Sow,
Brian Maxwell,
Matei I. Radulescu
Abstract:
We evaluate the effect of boundary layer losses on two-dimensional H2/O2/Ar cellular detonations obtained in narrow channels. The experiments provide the details of the cellular structure and the detonation speed deficits from the ideal CJ speed. We model the effect of the boundary layer losses by incorporating the flow divergence in the third dimension due to the negative boundary layer displacem…
▽ More
We evaluate the effect of boundary layer losses on two-dimensional H2/O2/Ar cellular detonations obtained in narrow channels. The experiments provide the details of the cellular structure and the detonation speed deficits from the ideal CJ speed. We model the effect of the boundary layer losses by incorporating the flow divergence in the third dimension due to the negative boundary layer displacement thickness, modeled using Mirels' theory. The cellular structures obtained numerically with the resulting quasi-2D formulation of the reactive Euler equations with two-step chain-branching chemistry are found in excellent agreement with experiment, both in terms of cell dynamics and velocity deficits, provided the boundary layer constant of Mirels is modified by a factor of 2. A significant increase in the cell size is found with increasing velocity deficit. This is found to be very well captured by the induction zone increase in slower detonations due to the lower temperatures in the induction zone.
△ Less
Submitted 20 October, 2020; v1 submitted 11 November, 2019;
originally announced November 2019.
-
Measurements of Flow Velocity and Scalar Concentration in Turbulent Multi-component Jets: Asymmetry and Buoyancy Effects
Authors:
Majid Soleimani nia,
Brian Maxwell,
Peter Oshkai,
Ned Djilali
Abstract:
Buoyancy effects and nozzle geometry can have a significant impact on turbulent jet dispersion. This work was motivated by applications involving hydrogen. Using helium as an experimental proxy, buoyant horizontal jets issuing from a round orifice on the side wall of a circular tube were analysed experimentally using particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) tec…
▽ More
Buoyancy effects and nozzle geometry can have a significant impact on turbulent jet dispersion. This work was motivated by applications involving hydrogen. Using helium as an experimental proxy, buoyant horizontal jets issuing from a round orifice on the side wall of a circular tube were analysed experimentally using particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) techniques simultaneously to provide instantaneous and time-averaged flow fields of velocity and concentration. Effects of buoyancy and asymmetry on the resulting flow structure were studied over a range of Reynolds numbers and gas densities. Significant differences were found between the centreline trajectory, spreading rate, and velocity decay of conventional horizontal round axisymmetric jets issuing through flat plates and the pipeline leak-representative jets considered in the present study. The realistic pipeline jets were always asymmetric and found to deflect about the jet axis in the near field. In the far field, it was found that the realistic pipeline leak geometry causes buoyancy effects to dominate much sooner than expected compared to horizontal round jets issuing through flat plates.
△ Less
Submitted 13 November, 2018;
originally announced November 2018.
-
Mechanism of flame acceleration and detonation transition from the interaction of a supersonic turbulent flame with an obstruction
Authors:
Willstrong Rakotoarison,
Brian Maxwell,
Andrzej Pekalski,
Matei I. Radulescu
Abstract:
The present paper seeks to determine the mechanism of flame acceleration and transition to detonation when a turbulent flame preceded by a shock interacts with a single obstruction in its path, taken as a cylindrical obstacle or a wall in the present study. The problem is addressed experimentally in a mixture of propane-oxygen at sub-atmospheric conditions. The turbulent flame was generated by pas…
▽ More
The present paper seeks to determine the mechanism of flame acceleration and transition to detonation when a turbulent flame preceded by a shock interacts with a single obstruction in its path, taken as a cylindrical obstacle or a wall in the present study. The problem is addressed experimentally in a mixture of propane-oxygen at sub-atmospheric conditions. The turbulent flame was generated by passing a detonation wave through a perforated plate, yielding flames with turbulent burning velocities 10 to 20 larger than the laminar values and incident shock Mach numbers ranging between 2 and 2.5. Time resolved schlieren videos recorded at approximately 100 kHz and numerical reconstruction of the flow field permitted to determine the mechanism of flame acceleration and transition to detonation. It was found to be the enhancement of the turbulent burning rate of the flame through its interaction with the shock reflection on the obstacle. The amplification of the burning rate was found to drive the flame burning velocity close to the speed of sound with respect to the fresh gases, resulting in the amplification of a shock in front of the flame. The acceleration through this regime resulted in the strengthening of this shock. Detonation was observed in regions of non-planarity of this internal shock, inherited by the irregular shape of the turbulent flame itself. Auto-ignition at early times of this process was found to be negligibly slow compared with the flow evolution time scale in the problem investigated, suggesting that the relevant time scale is primarily associated with the increase in turbulent burning rate by the interaction with reflected shocks.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Experimental and Numerical Investigation of Turbulent Jets Issuing Through a Realistic Pipeline Geometry: Asymmetry Effects for Air, Helium, and Hydrogen
Authors:
Majid Soleimani Nia,
Brian Maxwell,
Peter Oshkai,
Nedjib Djilali
Abstract:
Experiments and numerical simulations were conducted to investigate the dispersion of turbulent jets issuing from realistic pipe geometries. The effect of jet densities and Reynolds numbers on vertical buoyant jets were investigated, as they emerged from the side wall of a circular pipe, through a round orifice. Particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) techniqu…
▽ More
Experiments and numerical simulations were conducted to investigate the dispersion of turbulent jets issuing from realistic pipe geometries. The effect of jet densities and Reynolds numbers on vertical buoyant jets were investigated, as they emerged from the side wall of a circular pipe, through a round orifice. Particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) techniques were employed simultaneously to provide time-averaged flow velocity and concentrations fields. Large eddy simulation (LES) was applied to provide further detail with regards to the three-dimensionality of air, helium, and hydrogen jets. These realistic jets were always asymmetric and found to deflect about the vertical axis. This deflection was influenced by buoyancy, where heavier gases deflected more than lighter gases. Significant turbulent mixing was also observed in the near field. The realistic jets, therefore, experienced faster velocity decay, and asymmetric jet spreading compared to round jets. These findings indicate that conventional round jet assumptions are, to some extent, inadequate to predict gas concentration, entrainment rates and, consequently, the extent of the flammability envelope of realistic gas leaks.
△ Less
Submitted 8 December, 2017;
originally announced December 2017.
-
Investigation of Turbulent Mixing and Local Reaction Rates on Deflagration to Detonation Transition in Methane-Oxygen
Authors:
Brian Maxwell,
Andrzej Pekalski,
Matei Radulescu
Abstract:
In the current study, the influence of turbulent mixing and local reaction rates on deflagration to detonation transition (DDT) was investigated using a state-of-the-art large eddy simulation (LES) strategy. Specifically, detonation attenuation by a porous medium, and the subsequent re-initiation for methane-oxygen, a moderately unstable mixture, was considered. The purpose of the investigation wa…
▽ More
In the current study, the influence of turbulent mixing and local reaction rates on deflagration to detonation transition (DDT) was investigated using a state-of-the-art large eddy simulation (LES) strategy. Specifically, detonation attenuation by a porous medium, and the subsequent re-initiation for methane-oxygen, a moderately unstable mixture, was considered. The purpose of the investigation was to validate the numerical strategy with previous experimental observations, and to determine what specific roles turbulent mixing and shock compression have on flame acceleration during the final stages of DDT. The modelling procedure adopted was a grid-within-a-grid approach: The compressible linear eddy model for large eddy simulation (CLEM-LES). It was found that average turbulent fluctuations greater than the laminar flame speed were required in order to maintain wave velocities above the Chapman-Jouguet (CJ)-deflagration velocity threshold, a precursor requirement for DDT to occur. It was also found that sufficient turbulent burning on the flame surface was required in order to drive pressure waves to sufficiently strengthen the leading shock wave, locally, in order to trigger auto-ignition hot spots in the wave front. These local explosion events, which were found to burn out through turbulent surface reactions, drive transverse pressure waves outward. Upon subsequent shock reflections or interactions of the transverse waves, new local explosion events occurred, which further strengthened the adjacent leading shock wave above the CJ-detonation speed. Eventually, through this process, the wave sustained the CJ-detonation speed, on average, through the cyclic mechanism of local explosion events followed by turbulent surface reactions. Finally, combustion of the flame acceleration process was found to lie predominantly within the thin-reaction zones regime.
△ Less
Submitted 8 August, 2017;
originally announced August 2017.
-
Influence of Turbulent Fluctuations on Detonation Propagation
Authors:
Brian McN. Maxwell,
Rohit R. Bhattacharjee,
Sebastien S. M. Lau-Chapdelaine,
Sam A. E. G. Falle,
Gary J. Sharpe,
Matei I. Radulescu
Abstract:
The present study addresses the reaction zone structure and burning mechanism of unstable detonations. Experiments investigated mainly two-dimensional methane-oxygen cellular detonations in a thin channel geometry. The sufficiently high temporal resolution permitted to determine the PDF of the shock distribution, a power-law with an exponent of -3, and the burning rate of unreacted pockets from th…
▽ More
The present study addresses the reaction zone structure and burning mechanism of unstable detonations. Experiments investigated mainly two-dimensional methane-oxygen cellular detonations in a thin channel geometry. The sufficiently high temporal resolution permitted to determine the PDF of the shock distribution, a power-law with an exponent of -3, and the burning rate of unreacted pockets from their edges - through surface turbulent flames with a speed approximately 3-7 times larger than the laminar one at the local conditions. Numerical simulations were performed using a novel Large Eddy Simulation method where the reactions due to both auto-ignition and turbulent transport and treated exactly at the sub-grid scale in a reaction-diffusion formulation. The model is an extension of Kerstein & Menon's Linear Eddy Model for Large Eddy Simulation to treat flows with shock waves and rapid gasdynamic transients. The two-dimensional simulations recovered well the amplification of the laminar flame speed owing to the turbulence generated mainly by the shear layers originating from the triple points and subsequent Richtmyer-Meshkov instability associated with the internal pressure waves. The simulations clarified how the level of turbulence generated controlled the burning rate of the pockets, the hydrodynamic thickness of the wave, the cellular structure and its distribution. Three-dimensional simulations were found in general good agreement with the two-dimensional ones, in that the sub-grid scale model captured the ensuing turbulent burning once the scales associated with the cellular dynamics, where turbulent kinetic energy is injected, are well resolved.
△ Less
Submitted 4 October, 2016;
originally announced October 2016.
