-
Mapping Cassiopeia A's silicon/sulfur Doppler velocities with XRISM-Resolve
Authors:
Jacco Vink,
Manan Agarwal,
Aya Bamba,
Liyi Gu,
Paul Plucinsky,
Ehud Behar,
Lia Corrales,
Adam Foster,
Shin-ichiro Fujimoto,
Masahiro Ichihashi,
Kazuhiro Ichikawa,
Satoru Katsuda,
Hironori Matsumoto,
Kai Matsunaga,
Tsunefumi Mizuno,
Koji Mori,
Hiroshi Murakami,
Hiroshi Nakajima,
Toshiki Sato,
Makoto Sawada,
Haruto Sonoda,
Shunsuke Suzuki,
Dai Tateishi,
Yukikatsu Terada,
Hiroyuki Uchida
Abstract:
Young supernova remnants (SNRs) provide crucial insights into explosive nucleosynthesis products and their velocity distribution soon after the explosion. However, these velocities are influenced by the dynamics of the circumstellar medium (CSM), which originates from the progenitor's late-phase mass loss. Cas A, the youngest known Galactic core-collapse SNR, was studied to analyze the spatial dis…
▽ More
Young supernova remnants (SNRs) provide crucial insights into explosive nucleosynthesis products and their velocity distribution soon after the explosion. However, these velocities are influenced by the dynamics of the circumstellar medium (CSM), which originates from the progenitor's late-phase mass loss. Cas A, the youngest known Galactic core-collapse SNR, was studied to analyze the spatial distribution of Si and S radial velocities using two high-spectral resolution observations from the XRISM-Resolve imaging spectrometer.Resolve's capabilities enabled the detailed characterization of Si XIII, Si XIV, S XV, and S XVI lines, whose line shapes can be resolved and modeled using Gaussian radial-velocity components. The radial velocities measured generally align with previous CCD-based results, confirming that they were not artifacts caused by blended lines or ionization variations. Modeling line profiles with two-component Gaussians improved fits in some regions, revealing distinct redshifted (backside) and blueshifted (frontside) components only in a few specific areas. In most regions, however, both components were either both redshifted (northwest) or both blueshifted (southeast), consistent with the patchy ejecta shell morphology seen in optically emitting fast-moving knots. The individual line components revealed a line broadening ranging from $σ_v \approx 200$ to $σ_v \approx 2000$ km/s. Components with $1000 \lesssim σ_v \lesssim 2000$km/s are consistent with previously determined reverse shock velocities, suggesting non-equilibrated or partially equilibrated ion temperatures. Narrow components with small radial velocities found near Cas A's projected center likely originate from shocked CSM plasma. But the low radial velocity and small $σ_v$ defies identifying these components with either the frontside or backside of the SNR, or both.
△ Less
Submitted 7 May, 2025;
originally announced May 2025.
-
Room-temperature dislocation plasticity in ceramics: Methods, Materials, and Mechanisms
Authors:
Alexander Frisch,
Chukwudalu Okafor,
Oliver Preuß,
Jiawen Zhang,
Katsuyuki Matsunaga,
Atsutomo Nakamura,
Wenjun Lu,
Xufei Fang
Abstract:
Dislocation-mediated plastic deformation in ceramic materials has sparked renewed research interest due to the technological potential of dislocations. Despite the long research history of dislocations as one-dimensional lattice defects in crystalline solids, the understanding of plastically deformable ceramics at room temperature seems lacking. The conventional view holds that ceramics are brittl…
▽ More
Dislocation-mediated plastic deformation in ceramic materials has sparked renewed research interest due to the technological potential of dislocations. Despite the long research history of dislocations as one-dimensional lattice defects in crystalline solids, the understanding of plastically deformable ceramics at room temperature seems lacking. The conventional view holds that ceramics are brittle, difficult to deform at room temperature and exhibit no dislocation plasticity except in small-scale testing such as nanoindentation and nano-micropillar compression. In this review, we attempt to gather the evidence and reports of room-temperature dislocation plasticity in ceramics beyond the nano-/microscale, with a focus on meso-macroscale plasticity. First, we present a mechanical deformation toolbox covering various experimental approaches for assessing the dislocation plasticity, with a focus on bulk plasticity. Second, we provide a materials toolbox listing 44 ceramic compounds that have been reported to exhibit dislocation plasticity at meso-/macroscale under ambient conditions. Finally, we discuss the mechanics of dislocations in ceramics, aiming to establish a foundation for predicting and discovering additional ceramics capable of room-temperature plastic deformation, thereby advancing the development of prospective dislocation-based technologies.
△ Less
Submitted 6 April, 2025;
originally announced April 2025.
-
Measuring the asymmetric expansion of the Fe ejecta of Cassiopeia A with XRISM/Resolve
Authors:
Aya Bamba,
Manan Agarwal,
Jacco Vink,
Paul Plucinsky,
Yukikatsu Terada,
Ehud Behar,
Satoru Katsuda,
Koji Mori,
Makoto Sawada,
Hironori Matsumoto,
Lia Corrales,
Adam Foster,
Shin-ichiro Fujimoto,
Liyi Gu,
Kazuhiro Ichikawa,
Kai Matsunaga,
Tsunefumi Mizuno,
Hiroshi Murakami,
Hiroshi Nakajima,
Toshiki Sato,
Haruto Sonoda,
Shunsuke Suzuki,
Dai Tateishi,
Hiroyuki Uchida,
Masahiro Ichihashi
, et al. (2 additional authors not shown)
Abstract:
The expansion structure of supernova remnants (SNRs) is important for understanding not only how heavy elements are distributed into space, but also how supernovae explode. The ejecta expansion structure of the young core-collapse SNR Cas A is investigated, with Doppler parameter mapping of the Fe-K complex by the Resolve microcalorimeter onboard the X-ray Imaging and Spectroscopy Mission, XRISM.…
▽ More
The expansion structure of supernova remnants (SNRs) is important for understanding not only how heavy elements are distributed into space, but also how supernovae explode. The ejecta expansion structure of the young core-collapse SNR Cas A is investigated, with Doppler parameter mapping of the Fe-K complex by the Resolve microcalorimeter onboard the X-ray Imaging and Spectroscopy Mission, XRISM. It is found that the Fe ejecta are blueshifted in the southeast (SE) and redshifted in the northwest (NW), indicating an incomplete shell structure, similar to the intermediate mass elements (IMEs), such as Si and S. The Fe has a velocity shift of $\sim1400$ km~s$^{-1}$ in the NW and $\sim2160$ km~s$^{-1}$ in the SE region, with the error range of a few 100s km~s$^{-1}$. These values are consistent with those for the IMEs in the NW region, whereas larger than those for the IMEs in the SE region, although the large error region prevented us from concluding which component has significantly higher velocity. The line broadening is larger in the center with values of $\sim$2000--3000~km~s$^{-1}$, and smaller near the edges of the remnant. The radial profiles of the Doppler shift and broadening of the IMEs and Fe indicate that the Fe ejecta may expand asymmetrically as IME ejacta, although the large error regions do not allow us to conclude it. Moreover, we see little bulk Doppler broadening of the Fe lines in the northeastern jet region whereas the IME lines exhibit significant broadening. No such narrow lines are detected in the NW region. These findings suggest an asymmetric expansion of the ejecta potentially driven by large-scale asymmetries originating from the supernova explosion. This interpretation aligns with the large-scale asymmetries predicted by models of neutrino-driven supernova explosions.
△ Less
Submitted 9 April, 2025; v1 submitted 4 April, 2025;
originally announced April 2025.
-
Evidence for Type Ib/c origin of the supernova remnant G292.0+1.8
Authors:
Takuto Narita,
Hiroyuki Uchida,
Jacco Vink,
Satoru Katsuda,
Hideyuki Umeda,
Takashi Yoshida,
Toshiki Sato,
Kai Matsunaga,
Takeshi Go Tsuru
Abstract:
Circumstellar material (CSM) produced by mass loss from massive stars ($\gtrsim10 M_{\odot}$) through strong stellar winds or binary stripping provides rich information for understanding progenitors of core-collapse supernova remnants. In this paper we present a grating spectroscopy of a Galactic SNR G292.0+1.8, which is claimed to be a Type Ib/c remnant in a binary system according to recent stud…
▽ More
Circumstellar material (CSM) produced by mass loss from massive stars ($\gtrsim10 M_{\odot}$) through strong stellar winds or binary stripping provides rich information for understanding progenitors of core-collapse supernova remnants. In this paper we present a grating spectroscopy of a Galactic SNR G292.0+1.8, which is claimed to be a Type Ib/c remnant in a binary system according to recent studies. If G292.0+1.8 was experienced a strong mass-loss via binary interactions before its explosion, an oxygen-rich material produced in the He-burning layer is expected to be observed in the central belt-like structure formed by shock-heated CSM. Using the Reflection Grating Spectrometer onboard XMM-Newton, we detect N VII Ly$α$ line (0.50 keV) for the first time in G292.0+1.8 and find that the abundance ratio of nitrogen to oxygen is significantly lower (N/O$=0.5\pm0.1$) than the solar value. This low N/O suggests that the progenitor of experienced strong mass-loss and ended up to a Wolf-Rayet (WR) star exposing the He-burning layer at the pre-supernova. Comparing our result and the evolution models of single stars and binaries, we conclude that the progenitor of G292.0+1.8 experienced strong mass-loss enough to occur a Type Ib/c supernova. Our finding is another crucial piece of evidence for a stripped-envelope supernova such as Type Ib/c as the origin of G292.0+1.8.
△ Less
Submitted 26 September, 2024;
originally announced September 2024.
-
Progenitor Constraint Incorporating Shell Merger: The Case of Supernova Remnant G359.0-0.9
Authors:
Kai Matsunaga,
Hiroyuki Uchida,
Rei Enokiya,
Toshiki Sato,
Ryo Sawada,
Hideyuki Umeda,
Takuto Narita,
Takeshi Go Tsuru
Abstract:
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; s…
▽ More
It is generally hard to put robust constraints on progenitor masses of supernovae (SNe) and remnants (SNRs) observationally, while they offer tantalizing clues to understanding explosion mechanisms and mass distribution. Our recent study suggests that ``shell merger'', which is theoretically expected for stellar evolution, can appreciably affect final yields of inter-mediate mass elements (IMEs; such as Ne, Mg, and Si). In light of this, here we report results of X-ray spectral analysis of a Galactic SNR G359.0-0.9, whose abundance pattern may possibly be anomalous according to a previous study. Our spectroscopy using all the available data taken with XMM-Newton reveals that this remnant is classified as Mg-rich SNRs because of its high Mg-to-Ne ratio (Z_Mg/Z_Ne=1.90+0.27-0.19; mass ratio 0.66+0.09-0.07) and conclude that the result cannot be explained without the shell merger. By comparing the observation with theoretical calculations, we prefer the so-called Ne-burning shell intrusion and in this case the progenitor mass M_ZAMS is likely <15M_sun. We confirm the result also by our new molecular line observations with the NRO-45 m telescope: G359.0-0.9 is located in the Scutum-Centaurus arm (2.66--2.94 kpc) and in this case the resultant total ejecta mass ~6.8M_sun is indeed consistent with the above estimate. Our method using mass ratios of IMEs presented in this paper will become useful to distinguish the type of the shell merger, the Ne-burning shell intrusion and the O-burning shell merger, for future SNR studies.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Destratification in the Progenitor Interior of the Mg-rich Supernova Remnant N49B
Authors:
Toshiki Sato,
Kai Matsunaga,
Ryo Sawada,
Koh Takahashi,
Yudai Suwa,
John P. Hughes,
Hiroyuki Uchida,
Takuto Narita,
Hideyuki Umeda
Abstract:
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in sup…
▽ More
Simulations of pre-supernova evolution suggest that some intense shell burning can be so active that, in extreme cases, it can merge with the outer shell, changing the initial conditions for the supernova explosion. However, such violent activity in the interior of stars has been difficult to confirm from observations of stars. Here we propose that the elemental composition of O-rich ejecta in supernova remnants can be a tool to test for this kind of intense shell burning activity in the final stages of progenitor evolution. As an example, we discuss the origin of "Mg-rich" ejecta in the supernova remnant N49B. A high Mg/Ne mass ratio $\gtrsim 1$ suggests that the Ne- or O-burning shell has broken into or merged with the outer shell before the collapse. Such Mg-rich (or Ne-poor) ejecta has been identified in some other supernova remnants, supporting the idea that some destratification process, such as a shell merger, does indeed occur in the interiors of some massive stars, although they may not be the majority. Our results suggest that X-ray observations of O-rich ejecta in core-collapse supernova remnants will be a unique tool to probe the shell burning activity during the final stage of a massive star's interior.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Open data from the third observing run of LIGO, Virgo, KAGRA and GEO
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
A. Al-Jodah,
C. Alléné,
A. Allocca
, et al. (1719 additional authors not shown)
Abstract:
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasti…
▽ More
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Example-Based Explainable AI and its Application for Remote Sensing Image Classification
Authors:
Shin-nosuke Ishikawa,
Masato Todo,
Masato Taki,
Yasunobu Uchiyama,
Kazunari Matsunaga,
Peihsuan Lin,
Taiki Ogihara,
Masao Yasui
Abstract:
We present a method of explainable artificial intelligence (XAI), "What I Know (WIK)", to provide additional information to verify the reliability of a deep learning model by showing an example of an instance in a training dataset that is similar to the input data to be inferred and demonstrate it in a remote sensing image classification task. One of the expected roles of XAI methods is verifying…
▽ More
We present a method of explainable artificial intelligence (XAI), "What I Know (WIK)", to provide additional information to verify the reliability of a deep learning model by showing an example of an instance in a training dataset that is similar to the input data to be inferred and demonstrate it in a remote sensing image classification task. One of the expected roles of XAI methods is verifying whether inferences of a trained machine learning model are valid for an application, and it is an important factor that what datasets are used for training the model as well as the model architecture. Our data-centric approach can help determine whether the training dataset is sufficient for each inference by checking the selected example data. If the selected example looks similar to the input data, we can confirm that the model was not trained on a dataset with a feature distribution far from the feature of the input data. With this method, the criteria for selecting an example are not merely data similarity with the input data but also data similarity in the context of the model task. Using a remote sensing image dataset from the Sentinel-2 satellite, the concept was successfully demonstrated with reasonably selected examples. This method can be applied to various machine-learning tasks, including classification and regression.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Development of the new multi-beam receiver and telescope control system for NASCO
Authors:
Atsushi Nishimura,
Akio Ohama,
Kimihiro Kimura,
Daichi Tsutsumi,
Yudai Matsue,
Rin Yamada,
Mariko Sakamoto,
Kenta Matsunaga,
Yutaka Hasegawa,
Taisei Minami,
Takeru Matsumoto,
Kazuki Shiotani,
So Okuda,
Kakeru Fujishiro,
Keisuke Sakasai,
Masahiro Suzuki,
Shun Saeki,
Kouki Satani,
Kousuke Urushihara,
Chiharu Kato,
Takashi Kondo,
Kazuki Okawa,
Daiki Kurita,
Tetsuta Inaba,
Shohei Maruyama
, et al. (37 additional authors not shown)
Abstract:
We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through developing a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square…
▽ More
We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through developing a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square with the beam separation of 720$''$, are installed with a 100 GHz band SIS receiver having 2-polarization sideband-separation filter. The other beam, located at the optical axis, is installed with a 200 GHz band SIS receiver having 2-polarization sideband-separation filter. The cooled component is modularized for each beam, and cooled mirrors are used. The IF bandwidths are 8 and 4 GHz for 100 and 200 GHz bands, respectively. Using XFFTS spectrometers with a bandwidth of 2 GHz, the lines of $^{12}$CO, $^{13}$CO, and C$^{18}$O of $J$=1$-$0 or $J$=2$-$1 can be observed simultaneously for each beam. The control system is reconstructed on the ROS architecture, which is an open source framework for robot control, to enable a flexible observation mode and to handle a large amount of data. The framework is commonly used and maintained in a robotic field, and thereby reliability, flexibility, expandability, and efficiency in development are improved as compared with the system previously used. The receiver and control system are installed on the NANTEN2 telescope in December 2019, and its commissioning and science verification are on-going. We are planning to start science operation in early 2021.
△ Less
Submitted 1 December, 2020; v1 submitted 30 November, 2020;
originally announced November 2020.
-
Image Classification of Melanoma, Nevus and Seborrheic Keratosis by Deep Neural Network Ensemble
Authors:
Kazuhisa Matsunaga,
Akira Hamada,
Akane Minagawa,
Hiroshi Koga
Abstract:
This short paper reports the method and the evaluation results of Casio and Shinshu University joint team for the ISBI Challenge 2017 - Skin Lesion Analysis Towards Melanoma Detection - Part 3: Lesion Classification hosted by ISIC. Our online validation score was 0.958 with melanoma classifier AUC 0.924 and seborrheic keratosis classifier AUC 0.993.
This short paper reports the method and the evaluation results of Casio and Shinshu University joint team for the ISBI Challenge 2017 - Skin Lesion Analysis Towards Melanoma Detection - Part 3: Lesion Classification hosted by ISIC. Our online validation score was 0.958 with melanoma classifier AUC 0.924 and seborrheic keratosis classifier AUC 0.993.
△ Less
Submitted 8 March, 2017;
originally announced March 2017.
-
Reversible Nets of Polyhedra
Authors:
Jin Akiyama,
Stefan Langerman,
Kiyoko Matsunaga
Abstract:
An example of reversible (or hinge inside-out transformable) figures is the Dudeney's Haberdasher's puzzle in which an equilateral triangle is dissected into four pieces, then hinged like a chain, and then is transformed into a square by rotating the hinged pieces. Furthermore, the entire boundary of each figure goes into the inside of the other figure and becomes the dissection lines of the other…
▽ More
An example of reversible (or hinge inside-out transformable) figures is the Dudeney's Haberdasher's puzzle in which an equilateral triangle is dissected into four pieces, then hinged like a chain, and then is transformed into a square by rotating the hinged pieces. Furthermore, the entire boundary of each figure goes into the inside of the other figure and becomes the dissection lines of the other figure. Many intriguing results on reversibilities of figures have been found in prior research, but most of them are results on polygons. This paper generalizes those results to a wider range of general connected figures. It is shown that two nets obtained by cutting the surface of an arbitrary convex polyhedron along non-intersecting dissection trees are reversible. Moreover, a condition for two nets of an isotetrahedron to be both reversible and tessellative is given.
△ Less
Submitted 2 July, 2016;
originally announced July 2016.
