Showing 1–50 of 415 results for author: Mason, K

The ultraviolet luminosity function of star-forming galaxies between redshifts of 0.4 and 0.6

Authors: M. J. Page, T. Dwelly, I. McHardy, N. Seymour, K. O. Mason, M. Sharma, J. A. Kennea, T. P. Sasseen, A. A. Breeveld, A. E. Matthews

Abstract: We combine ultraviolet imaging of the 13H survey field, taken with the XMM-Newton Optical Monitor telescope (XMM-OM) and the Neil Gehrels Swift Observatory Ultraviolet and Optical Telescope (UVOT) in the UVM2 band, to measure rest-frame ultraviolet 1500A luminosity functions of star-forming galaxies with redshifts between 0.4 and 0.6. In total the UVM2 imaging covers a sky area of 641 square arcmi… ▽ More We combine ultraviolet imaging of the 13H survey field, taken with the XMM-Newton Optical Monitor telescope (XMM-OM) and the Neil Gehrels Swift Observatory Ultraviolet and Optical Telescope (UVOT) in the UVM2 band, to measure rest-frame ultraviolet 1500A luminosity functions of star-forming galaxies with redshifts between 0.4 and 0.6. In total the UVM2 imaging covers a sky area of 641 square arcmin, and we detect 273 galaxies in the UVM2 image with 0.4<z<0.6. The luminosity function is fit by a Schechter function with best-fit values for the faint end slope alpha = -1.8 +0.4 -0.3 and characteristic absolute magnitude M* = -19.1 +0.3 -0.4. In common with XMM-OM based studies at higher redshifts, our best-fitting value for M* is fainter than previous measurements. We argue that the purging of active galactic nuclei from the sample, facilitated by the co-spatial X-ray survey carried out with XMM-Newton is important for the determination of M*. At the brightest absolute magnitudes (M1500<-18.5) the average UV colour of our galaxies is consistent with that of minimal-extinction local analogues, but the average UV colour is redder for galaxies at fainter absolute magnitudes, suggesting that higher levels of dust attenuation enter the sample at absolute magnitudes somewhat fainter than M*. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: Published in MNRAS

Journal ref: MNRAS, 536, 518 (2025)

Optimisation of Magnetic Field Sensing with Optically Pumped Magnetometers for Magnetic Detection Electrical Impedance Tomography

Authors: Kai Mason, Florencia Maurino-Alperovich, Kirill Aristovich, David Holder

Abstract: Magnetic Detection Electrical Impedance Tomography is a novel technique that could enable non-invasive imaging of fast neural activity in the brain. However, commercial magnetometers are not suited to its technical requirements. Computational modelling was used to determine the optimal number, size and orientation of magnetometers, to inform the future development of MDEIT-specific magnetometers.… ▽ More Magnetic Detection Electrical Impedance Tomography is a novel technique that could enable non-invasive imaging of fast neural activity in the brain. However, commercial magnetometers are not suited to its technical requirements. Computational modelling was used to determine the optimal number, size and orientation of magnetometers, to inform the future development of MDEIT-specific magnetometers. Images were reconstructed using three sensing axes, arrays of 16 to 160 magnetometers, and cell sizes ranging from 1 to 18 mm. Image quality was evaluated visually and with the weighted spatial variance. Single-axis measurements normal to the surface provided the best image quality, and image quality increased with an increase in sensor number and size. This study can inform future OPM design, showing the size of the vapour cell need not be constrained to that of commercially available OPMs, and that a small array of single-axis, highly sensitive sensors is optimal for MDEIT. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Comments: 16 pages, 5 figures, 2 tables

Advanced LIGO detector performance in the fourth observing run

Authors: E. Capote, W. Jia, N. Aritomi, M. Nakano, V. Xu, R. Abbott, I. Abouelfettouh, R. X. Adhikari, A. Ananyeva, S. Appert, S. K. Apple, K. Arai, S. M. Aston, M. Ball, S. W. Ballmer, D. Barker, L. Barsotti, B. K. Berger, J. Betzwieser, D. Bhattacharjee, G. Billingsley, S. Biscans, C. D. Blair, N. Bode, E. Bonilla , et al. (171 additional authors not shown)

Abstract: On May 24th, 2023, the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), joined by the Advanced Virgo and KAGRA detectors, began the fourth observing run for a two-year-long dedicated search for gravitational waves. The LIGO Hanford and Livingston detectors have achieved an unprecedented sensitivity to gravitational waves, with an angle-averaged median range to binary neutron st… ▽ More On May 24th, 2023, the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), joined by the Advanced Virgo and KAGRA detectors, began the fourth observing run for a two-year-long dedicated search for gravitational waves. The LIGO Hanford and Livingston detectors have achieved an unprecedented sensitivity to gravitational waves, with an angle-averaged median range to binary neutron star mergers of 152 Mpc and 160 Mpc, and duty cycles of 65.0% and 71.2%, respectively, with a coincident duty cycle of 52.6%. The maximum range achieved by the LIGO Hanford detector is 165 Mpc and the LIGO Livingston detector 177 Mpc, both achieved during the second part of the fourth observing run. For the fourth run, the quantum-limited sensitivity of the detectors was increased significantly due to the higher intracavity power from laser system upgrades and replacement of core optics, and from the addition of a 300 m filter cavity to provide the squeezed light with a frequency-dependent squeezing angle, part of the A+ upgrade program. Altogether, the A+ upgrades led to reduced detector-wide losses for the squeezed vacuum states of light which, alongside the filter cavity, enabled broadband quantum noise reduction of up to 5.2 dB at the Hanford observatory and 6.1 dB at the Livingston observatory. Improvements to sensors and actuators as well as significant controls commissioning increased low frequency sensitivity. This paper details these instrumental upgrades, analyzes the noise sources that limit detector sensitivity, and describes the commissioning challenges of the fourth observing run. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: 26 pages, 18 figures

Report number: LIGO-P2400256

Journal ref: Phys. Rev. D 111, 062002 (2025)

Lo-MARVE: A Low Cost Autonomous Underwater Vehicle for Marine Exploration

Authors: Karl Mason, Daniel Kelly

Abstract: This paper presents Low-cost Marine Autonomous Robotic Vehicle Explorer (Lo-MARVE), a novel autonomous underwater vehicle (AUV) designed to provide a low cost solution for underwater exploration and environmental monitoring in shallow water environments. Lo-MARVE offers a cost-effective alternative to existing AUVs, featuring a modular design, low-cost sensors, and wireless communication capabilit… ▽ More This paper presents Low-cost Marine Autonomous Robotic Vehicle Explorer (Lo-MARVE), a novel autonomous underwater vehicle (AUV) designed to provide a low cost solution for underwater exploration and environmental monitoring in shallow water environments. Lo-MARVE offers a cost-effective alternative to existing AUVs, featuring a modular design, low-cost sensors, and wireless communication capabilities. The total cost of Lo-MARVE is approximately EUR 500. Lo-MARVE is developed using the Raspberry Pi 4B microprocessor, with control software written in Python. The proposed AUV was validated through field testing outside of a laboratory setting, in the freshwater environment of the River Corrib in Galway, Ireland. This demonstrates its ability to navigate autonomously, collect data, and communicate effectively outside of a controlled laboratory setting. The successful deployment of Lo-MARVE in a real-world environment validates its proof of concept. △ Less

Submitted 13 November, 2024; originally announced November 2024.

Comments: This paper was presented at the 12th International Conference on Control, Mechatronics and Automation (ICCMA 2024), held in London, UK, from November 11-13, 2024

A Metric on the Polycrystalline Microstructure State Space

Authors: Dylan Miley, Ethan Suwandi, Benjamin Schweinhart, Jeremy K Mason

Abstract: Material microstructures are traditionally compared using sets of statistical measures that are incomplete, e.g., two visually distinct microstructures can have identical grain size distributions and phase fractions. While this is not a severe concern for materials fabricated by traditional means, the microstructures produced by advanced manufacturing methods can depend sensitively and unpredictab… ▽ More Material microstructures are traditionally compared using sets of statistical measures that are incomplete, e.g., two visually distinct microstructures can have identical grain size distributions and phase fractions. While this is not a severe concern for materials fabricated by traditional means, the microstructures produced by advanced manufacturing methods can depend sensitively and unpredictably on the processing conditions. Moreover, the advent of computational materials design has increased the frequency of synthetic microstructure generation, and there is not yet a standard approach in the literature to validate the generated microstructures with experimental ones. This work proposes an idealized distance on the space of single-phase polycrystalline microstructures such that two microstructures that are close with respect to the distance exhibit statistically similar grain geometries in all respects below a user-specified length scale. Given a pair of micrographs, the distance is approximated by sampling windows from the micrographs, defining a distance between pairs of windows, and finding a window matching that minimizes the sum of pairwise window distances. The approach is used to compare a variety of synthetic microstructures and to develop a procedure to query a proof-of-concept database suitable for general single-phase polycrystalline microstructures. △ Less

Submitted 7 October, 2024; originally announced October 2024.

Comments: 15 pages, 10 figures

Inferring Preferences from Demonstrations in Multi-objective Reinforcement Learning

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: Many decision-making problems feature multiple objectives where it is not always possible to know the preferences of a human or agent decision-maker for different objectives. However, demonstrated behaviors from the decision-maker are often available. This research proposes a dynamic weight-based preference inference (DWPI) algorithm that can infer the preferences of agents acting in multi-objecti… ▽ More Many decision-making problems feature multiple objectives where it is not always possible to know the preferences of a human or agent decision-maker for different objectives. However, demonstrated behaviors from the decision-maker are often available. This research proposes a dynamic weight-based preference inference (DWPI) algorithm that can infer the preferences of agents acting in multi-objective decision-making problems from demonstrations. The proposed algorithm is evaluated on three multi-objective Markov decision processes: Deep Sea Treasure, Traffic, and Item Gathering, and is compared to two existing preference inference algorithms. Empirical results demonstrate significant improvements compared to the baseline algorithms, in terms of both time efficiency and inference accuracy. The DWPI algorithm maintains its performance when inferring preferences for sub-optimal demonstrations. Moreover, the DWPI algorithm does not necessitate any interactions with the user during inference - only demonstrations are required. We provide a correctness proof and complexity analysis of the algorithm and statistically evaluate the performance under different representation of demonstrations. △ Less

Submitted 30 September, 2024; originally announced September 2024.

Comments: Neural Comput & Applic (2024)

LIGO Detector Characterization in the first half of the fourth Observing run

Authors: S. Soni, B. K. Berger, D. Davis, F. Di. Renzo, A. Effler, T. A. Ferreira, J. Glanzer, E. Goetz, G. González, A. Helmling-Cornell, B. Hughey, R. Huxford, B. Mannix, G. Mo, D. Nandi, A. Neunzert, S. Nichols, K. Pham, A. I. Renzini, R. M. S. Schofield, A Stuver, M. Trevor, S. Álvarez-López, R. Beda, C. P. L. Berry , et al. (211 additional authors not shown)

Abstract: Progress in gravitational-wave astronomy depends upon having sensitive detectors with good data quality. Since the end of the LIGO-Virgo-KAGRA third Observing run in March 2020, detector-characterization efforts have lead to increased sensitivity of the detectors, swifter validation of gravitational-wave candidates and improved tools used for data-quality products. In this article, we discuss thes… ▽ More Progress in gravitational-wave astronomy depends upon having sensitive detectors with good data quality. Since the end of the LIGO-Virgo-KAGRA third Observing run in March 2020, detector-characterization efforts have lead to increased sensitivity of the detectors, swifter validation of gravitational-wave candidates and improved tools used for data-quality products. In this article, we discuss these efforts in detail and their impact on our ability to detect and study gravitational-waves. These include the multiple instrumental investigations that led to reduction in transient noise, along with the work to improve software tools used to examine the detectors data-quality. We end with a brief discussion on the role and requirements of detector characterization as the sensitivity of our detectors further improves in the future Observing runs. △ Less

Submitted 4 September, 2024; originally announced September 2024.

Comments: 35 pages, 18 figures

A Meta-Learning Approach for Multi-Objective Reinforcement Learning in Sustainable Home Environments

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: Effective residential appliance scheduling is crucial for sustainable living. While multi-objective reinforcement learning (MORL) has proven effective in balancing user preferences in appliance scheduling, traditional MORL struggles with limited data in non-stationary residential settings characterized by renewable generation variations. Significant context shifts that can invalidate previously le… ▽ More Effective residential appliance scheduling is crucial for sustainable living. While multi-objective reinforcement learning (MORL) has proven effective in balancing user preferences in appliance scheduling, traditional MORL struggles with limited data in non-stationary residential settings characterized by renewable generation variations. Significant context shifts that can invalidate previously learned policies. To address these challenges, we extend state-of-the-art MORL algorithms with the meta-learning paradigm, enabling rapid, few-shot adaptation to shifting contexts. Additionally, we employ an auto-encoder (AE)-based unsupervised method to detect environment context changes. We have also developed a residential energy environment to evaluate our method using real-world data from London residential settings. This study not only assesses the application of MORL in residential appliance scheduling but also underscores the effectiveness of meta-learning in energy management. Our top-performing method significantly surpasses the best baseline, while the trained model saves 3.28% on electricity bills, a 2.74% increase in user comfort, and a 5.9% improvement in expected utility. Additionally, it reduces the sparsity of solutions by 62.44%. Remarkably, these gains were accomplished using 96.71% less training data and 61.1% fewer training steps. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Optimizing Deep Reinforcement Learning for Adaptive Robotic Arm Control

Authors: Jonaid Shianifar, Michael Schukat, Karl Mason

Abstract: In this paper, we explore the optimization of hyperparameters for the Soft Actor-Critic (SAC) and Proximal Policy Optimization (PPO) algorithms using the Tree-structured Parzen Estimator (TPE) in the context of robotic arm control with seven Degrees of Freedom (DOF). Our results demonstrate a significant enhancement in algorithm performance, TPE improves the success rate of SAC by 10.48 percentage… ▽ More In this paper, we explore the optimization of hyperparameters for the Soft Actor-Critic (SAC) and Proximal Policy Optimization (PPO) algorithms using the Tree-structured Parzen Estimator (TPE) in the context of robotic arm control with seven Degrees of Freedom (DOF). Our results demonstrate a significant enhancement in algorithm performance, TPE improves the success rate of SAC by 10.48 percentage points and PPO by 34.28 percentage points, where models trained for 50K episodes. Furthermore, TPE enables PPO to converge to a reward within 95% of the maximum reward 76% faster than without TPE, which translates to about 40K fewer episodes of training required for optimal performance. Also, this improvement for SAC is 80% faster than without TPE. This study underscores the impact of advanced hyperparameter optimization on the efficiency and success of deep reinforcement learning algorithms in complex robotic tasks. △ Less

Submitted 12 June, 2024; originally announced July 2024.

A Deep Reinforcement Learning Approach to Battery Management in Dairy Farming via Proximal Policy Optimization

Authors: Nawazish Ali, Rachael Shaw, Karl Mason

Abstract: Dairy farms consume a significant amount of electricity for their operations, and this research focuses on enhancing energy efficiency and minimizing the impact on the environment in the sector by maximizing the utilization of renewable energy sources. This research investigates the application of Proximal Policy Optimization (PPO), a deep reinforcement learning algorithm (DRL), to enhance dairy f… ▽ More Dairy farms consume a significant amount of electricity for their operations, and this research focuses on enhancing energy efficiency and minimizing the impact on the environment in the sector by maximizing the utilization of renewable energy sources. This research investigates the application of Proximal Policy Optimization (PPO), a deep reinforcement learning algorithm (DRL), to enhance dairy farming battery management. We evaluate the algorithm's effectiveness based on its ability to reduce reliance on the electricity grid, highlighting the potential of DRL to enhance energy management in dairy farming. Using real-world data our results demonstrate how the PPO approach outperforms Q-learning by 1.62% for reducing electricity import from the grid. This significant improvement highlights the potential of the Deep Reinforcement Learning algorithm for improving energy efficiency and sustainability in dairy farms. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 12 pages, 5 figures, Practical Applications of Agents and Multi-Agent Systems(PAAMS 2024)

Reinforcement Learning Enabled Peer-to-Peer Energy Trading for Dairy Farms

Authors: Mian Ibad Ali Shah, Enda Barrett, Karl Mason

Abstract: Farm businesses are increasingly adopting renewables to enhance energy efficiency and reduce reliance on fossil fuels and the grid. This shift aims to decrease dairy farms' dependence on traditional electricity grids by enabling the sale of surplus renewable energy in Peer-to-Peer markets. However, the dynamic nature of farm communities poses challenges, requiring specialized algorithms for P2P en… ▽ More Farm businesses are increasingly adopting renewables to enhance energy efficiency and reduce reliance on fossil fuels and the grid. This shift aims to decrease dairy farms' dependence on traditional electricity grids by enabling the sale of surplus renewable energy in Peer-to-Peer markets. However, the dynamic nature of farm communities poses challenges, requiring specialized algorithms for P2P energy trading. To address this, the Multi-Agent Peer-to-Peer Dairy Farm Energy Simulator (MAPDES) has been developed, providing a platform to experiment with Reinforcement Learning techniques. The simulations demonstrate significant cost savings, including a 43% reduction in electricity expenses, a 42% decrease in peak demand, and a 1.91% increase in energy sales compared to baseline scenarios lacking peer-to-peer energy trading or renewable energy sources. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: Proc. of the Main Track of 22nd International Conference on Practical Applications of Agents and Multi-Agent Systems, 26th-28th June, 2024, https://www.paams.net/. Includes 6 figures, 1 table and 32 references

Texture tomography, a versatile framework to study crystalline texture in 3D

Authors: M. P. K. Frewein, J. K. Mason, B. Maier, H. Cölfen, M. Burghammer, A. A. Medjahed, M. Allain, T. A. Grünewald

Abstract: The crystallographic texture is a key organization feature of many technical and biological materials. In these materials, especially hierarchically structured ones, the preferential alignment of the nano constituents is heavily influencing the macroscopic behaviour of the material. In order to study local crystallographic texture with both high spatial and angular resolution, we developed Texture… ▽ More The crystallographic texture is a key organization feature of many technical and biological materials. In these materials, especially hierarchically structured ones, the preferential alignment of the nano constituents is heavily influencing the macroscopic behaviour of the material. In order to study local crystallographic texture with both high spatial and angular resolution, we developed Texture tomography (TexTOM). This approach allows to model the diffraction data of polycrystalline materials by using the full reciprocal space of the ensemble of crystals and describe the texture in each voxel via a orientation distribution function. This means, it provides 3D reconstructions of the local texture by measuring the probabilities of all crystal orientations. The TexTOM approach addresses limitations associated with existing models: It correlates the intensities from several Bragg reflections, thus reduces ambiguities resulting from symmetry. Further, it yields quantitative probability distributions of local real space crystal orientations without further assumptions on the sample structure. Finally, its efficient mathematical formulation enables reconstructions faster than the time-scale of the experiment. In this manuscript, we present the mathematical model, the inversion strategy and its current experimental implementation. We show characterizations of simulated data as well as experimental data obtained from a synthetic, inorganic model sample, the silica-witherite biomorph. In conclusion, Tex-TOM provides a versatile framework to reconstruct 3D quantitative texture information for polycrystalline samples. In this way, it opens the door for unprecedented insights into the nanostructural makeup of natural and technical materials. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Demonstration Guided Multi-Objective Reinforcement Learning

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: Multi-objective reinforcement learning (MORL) is increasingly relevant due to its resemblance to real-world scenarios requiring trade-offs between multiple objectives. Catering to diverse user preferences, traditional reinforcement learning faces amplified challenges in MORL. To address the difficulty of training policies from scratch in MORL, we introduce demonstration-guided multi-objective rein… ▽ More Multi-objective reinforcement learning (MORL) is increasingly relevant due to its resemblance to real-world scenarios requiring trade-offs between multiple objectives. Catering to diverse user preferences, traditional reinforcement learning faces amplified challenges in MORL. To address the difficulty of training policies from scratch in MORL, we introduce demonstration-guided multi-objective reinforcement learning (DG-MORL). This novel approach utilizes prior demonstrations, aligns them with user preferences via corner weight support, and incorporates a self-evolving mechanism to refine suboptimal demonstrations. Our empirical studies demonstrate DG-MORL's superiority over existing MORL algorithms, establishing its robustness and efficacy, particularly under challenging conditions. We also provide an upper bound of the algorithm's sample complexity. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Open-Set Recognition in the Age of Vision-Language Models

Authors: Dimity Miller, Niko Sünderhauf, Alex Kenna, Keita Mason

Abstract: Are vision-language models (VLMs) for open-vocabulary perception inherently open-set models because they are trained on internet-scale datasets? We answer this question with a clear no - VLMs introduce closed-set assumptions via their finite query set, making them vulnerable to open-set conditions. We systematically evaluate VLMs for open-set recognition and find they frequently misclassify object… ▽ More Are vision-language models (VLMs) for open-vocabulary perception inherently open-set models because they are trained on internet-scale datasets? We answer this question with a clear no - VLMs introduce closed-set assumptions via their finite query set, making them vulnerable to open-set conditions. We systematically evaluate VLMs for open-set recognition and find they frequently misclassify objects not contained in their query set, leading to alarmingly low precision when tuned for high recall and vice versa. We show that naively increasing the size of the query set to contain more and more classes does not mitigate this problem, but instead causes diminishing task performance and open-set performance. We establish a revised definition of the open-set problem for the age of VLMs, define a new benchmark and evaluation protocol to facilitate standardised evaluation and research in this important area, and evaluate promising baseline approaches based on predictive uncertainty and dedicated negative embeddings on a range of open-vocabulary VLM classifiers and object detectors. △ Less

Submitted 19 July, 2024; v1 submitted 25 March, 2024; originally announced March 2024.

Comments: 29 pages, Accepted for publication in ECCV 2024

A Reinforcement Learning Approach to Dairy Farm Battery Management using Q Learning

Authors: Nawazish Ali, Abdul Wahid, Rachael Shaw, Karl Mason

Abstract: Dairy farming consumes a significant amount of energy, making it an energy-intensive sector within agriculture. Integrating renewable energy generation into dairy farming could help address this challenge. Effective battery management is important for integrating renewable energy generation. Managing battery charging and discharging poses significant challenges because of fluctuations in electrica… ▽ More Dairy farming consumes a significant amount of energy, making it an energy-intensive sector within agriculture. Integrating renewable energy generation into dairy farming could help address this challenge. Effective battery management is important for integrating renewable energy generation. Managing battery charging and discharging poses significant challenges because of fluctuations in electrical consumption, the intermittent nature of renewable energy generation, and fluctuations in energy prices. Artificial Intelligence (AI) has the potential to significantly improve the use of renewable energy in dairy farming, however, there is limited research conducted in this particular domain. This research considers Ireland as a case study as it works towards attaining its 2030 energy strategy centered on the utilization of renewable sources. This study proposes a Q-learning-based algorithm for scheduling battery charging and discharging in a dairy farm setting. This research also explores the effect of the proposed algorithm by adding wind generation data and considering additional case studies. The proposed algorithm reduces the cost of imported electricity from the grid by 13.41%, peak demand by 2%, and 24.49% when utilizing wind generation. These results underline how reinforcement learning is highly effective in managing batteries in the dairy farming sector. △ Less

Submitted 15 May, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Modelling Solar PV Adoption in Irish Dairy Farms using Agent-Based Modelling

Authors: Iias Faiud, Michael Schukat, Karl Mason

Abstract: The agricultural sector is facing mounting demands to enhance energy efficiency within farm enterprises, concurrent with a steady escalation in electricity costs. This paper focuses on modelling the adoption rate of photovoltaic (PV) energy within the dairy sector in Ireland. An agent-based modelling approach is introduced to estimate the adoption rate. The model considers grid energy prices, reve… ▽ More The agricultural sector is facing mounting demands to enhance energy efficiency within farm enterprises, concurrent with a steady escalation in electricity costs. This paper focuses on modelling the adoption rate of photovoltaic (PV) energy within the dairy sector in Ireland. An agent-based modelling approach is introduced to estimate the adoption rate. The model considers grid energy prices, revenue, costs, and maintenance expenses to calculate the probability of PV adoption. The ABM outputs estimate that by year 2022, 2.45% of dairy farmers have installed PV. This is a 0.45% difference to the actual PV adoption rate in year 2022. This validates the proposed ABM. The paper demonstrates the increasing interest in PV systems as evidenced by the rate of adoption, shedding light on the potential advantages of PV energy adoption in agriculture. This study possesses the potential to forecast future rates of PV energy adoption among dairy farmers. It establishes a groundwork for further research on predicting and understanding the factors influencing the adoption of renewable energy. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Inferring Preferences from Demonstrations in Multi-Objective Residential Energy Management

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: It is often challenging for a user to articulate their preferences accurately in multi-objective decision-making problems. Demonstration-based preference inference (DemoPI) is a promising approach to mitigate this problem. Understanding the behaviours and values of energy customers is an example of a scenario where preference inference can be used to gain insights into the values of energy custome… ▽ More It is often challenging for a user to articulate their preferences accurately in multi-objective decision-making problems. Demonstration-based preference inference (DemoPI) is a promising approach to mitigate this problem. Understanding the behaviours and values of energy customers is an example of a scenario where preference inference can be used to gain insights into the values of energy customers with multiple objectives, e.g. cost and comfort. In this work, we applied the state-of-art DemoPI method, i.e., the dynamic weight-based preference inference (DWPI) algorithm in a multi-objective residential energy consumption setting to infer preferences from energy consumption demonstrations by simulated users following a rule-based approach. According to our experimental results, the DWPI model achieves accurate demonstration-based preference inferring in three scenarios. These advancements enhance the usability and effectiveness of multi-objective reinforcement learning (MORL) in energy management, enabling more intuitive and user-friendly preference specifications, and opening the door for DWPI to be applied in real-world settings. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Go-Explore for Residential Energy Management

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: Reinforcement learning is commonly applied in residential energy management, particularly for optimizing energy costs. However, RL agents often face challenges when dealing with deceptive and sparse rewards in the energy control domain, especially with stochastic rewards. In such situations, thorough exploration becomes crucial for learning an optimal policy. Unfortunately, the exploration mechani… ▽ More Reinforcement learning is commonly applied in residential energy management, particularly for optimizing energy costs. However, RL agents often face challenges when dealing with deceptive and sparse rewards in the energy control domain, especially with stochastic rewards. In such situations, thorough exploration becomes crucial for learning an optimal policy. Unfortunately, the exploration mechanism can be misled by deceptive reward signals, making thorough exploration difficult. Go-Explore is a family of algorithms which combines planning methods and reinforcement learning methods to achieve efficient exploration. We use the Go-Explore algorithm to solve the cost-saving task in residential energy management problems and achieve an improvement of up to 19.84\% compared to the well-known reinforcement learning algorithms. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Noise-based Correction for Electrical Impedance Tomography

Authors: Kai Mason, Florencia Maurino-Alperovich, David Holder, Kirill Aristovich

Abstract: Introduction. Noisy measurements frequently cause noisy and inaccurate images in impedance imaging. No post-processing technique exists to calculate the propagation of measurement noise and use this to suppress noise in the image. Objectives. The objectives of this work were (1) to develop a post-processing method for noise-based correction (NBC) in impedance tomography, (2) to test whether NBC im… ▽ More Introduction. Noisy measurements frequently cause noisy and inaccurate images in impedance imaging. No post-processing technique exists to calculate the propagation of measurement noise and use this to suppress noise in the image. Objectives. The objectives of this work were (1) to develop a post-processing method for noise-based correction (NBC) in impedance tomography, (2) to test whether NBC improves image quality in electrical impedance tomography (EIT), (3) to determine whether it is preferable to use correlated or uncorrelated noise for NBC, (4) to test whether NBC works with in vivo data and (5) to test whether NBC is stable across model and perturbation geometries. Methods. EIT was performed in silico in a 2D homogeneous circular domain and an anatomically realistic, heterogeneous 3D human head domain for four perturbations and 25 noise levels in each case. This was validated by performing EIT for four perturbations in a circular, saline tank in 2D as well as a human head-shaped saline tank with a realistic skull-like layer in 3D. Images were assessed on the weighted spatial variance (WSV) with respect to the target image. The effect of NBC was also tested for example in vivo EIT data of lung ventilation in a human thorax and cortical activity in a rat brain. Results. On visual inspection, NBC maintained or increased image quality for all perturbations and noise levels in 2D and 3D experimentally and in silico. Analysis of the WSV showed that NBC significantly improved the WSV in nearly all cases. When the WSV was inferior with NBC, this was either visually imperceptible or a transformation between noisy images. For in vivo data, NBC improved image quality in all cases and preserved the expected shape of the reconstructed perturbation. In practice, uncorrelated NBC performed better than correlated NBC and is recommended as a general-use post-processing technique in EIT. △ Less

Submitted 12 March, 2024; v1 submitted 11 December, 2023; originally announced December 2023.

Comments: 23 pages, 13 figures

A Multi-Agent Systems Approach for Peer-to-Peer Energy Trading in Dairy Farming

Authors: Mian Ibad Ali Shah, Abdul Wahid, Enda Barrett, Karl Mason

Abstract: To achieve desired carbon emission reductions, integrating renewable generation and accelerating the adoption of peer-to-peer energy trading is crucial. This is especially important for energy-intensive farming, like dairy farming. However, integrating renewables and peer-to-peer trading presents challenges. To address this, we propose the Multi-Agent Peer-to-Peer Dairy Farm Energy Simulator (MAPD… ▽ More To achieve desired carbon emission reductions, integrating renewable generation and accelerating the adoption of peer-to-peer energy trading is crucial. This is especially important for energy-intensive farming, like dairy farming. However, integrating renewables and peer-to-peer trading presents challenges. To address this, we propose the Multi-Agent Peer-to-Peer Dairy Farm Energy Simulator (MAPDES), enabling dairy farms to participate in peer-to-peer markets. Our strategy reduces electricity costs and peak demand by approximately 30% and 24% respectively, while increasing energy sales by 37% compared to the baseline scenario without P2P trading. This demonstrates the effectiveness of our approach. △ Less

Submitted 21 August, 2023; originally announced October 2023.

Comments: Proc. of the Artificial Intelligence for Sustainability, ECAI 2023, Eunika et al. (eds.), Sep 30- Oct 1, 2023, https://sites.google.com/view/ai4s. 2023

A Joint Fermi-GBM and Swift-BAT Analysis of Gravitational-Wave Candidates from the Third Gravitational-wave Observing Run

Authors: C. Fletcher, J. Wood, R. Hamburg, P. Veres, C. M. Hui, E. Bissaldi, M. S. Briggs, E. Burns, W. H. Cleveland, M. M. Giles, A. Goldstein, B. A. Hristov, D. Kocevski, S. Lesage, B. Mailyan, C. Malacaria, S. Poolakkil, A. von Kienlin, C. A. Wilson-Hodge, The Fermi Gamma-ray Burst Monitor Team, M. Crnogorčević, J. DeLaunay, A. Tohuvavohu, R. Caputo, S. B. Cenko , et al. (1674 additional authors not shown)

Abstract: We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses,… ▽ More We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma-rays from binary black hole mergers. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Modelling Electricity Consumption in Irish Dairy Farms Using Agent-Based Modelling

Authors: Hossein Khaleghy, Abdul Wahid, Eoghan Clifford, Karl Mason

Abstract: Dairy farming can be an energy intensive form of farming. Understanding the factors affecting electricity consumption on dairy farms is crucial for farm owners and energy providers. In order to accurately estimate electricity demands in dairy farms, it is necessary to develop a model. In this research paper, an agent-based model is proposed to model the electricity consumption of Irish dairy farms… ▽ More Dairy farming can be an energy intensive form of farming. Understanding the factors affecting electricity consumption on dairy farms is crucial for farm owners and energy providers. In order to accurately estimate electricity demands in dairy farms, it is necessary to develop a model. In this research paper, an agent-based model is proposed to model the electricity consumption of Irish dairy farms. The model takes into account various factors that affect the energy consumption of dairy farms, including herd size, number of milking machines, and time of year. The outputs are validated using existing state-of-the-art dairy farm modelling frameworks. The proposed agent-based model is fully explainable, which is an advantage over other Artificial Intelligence techniques, e.g. deep learning. △ Less

Submitted 18 August, 2023; originally announced August 2023.

Comments: This paper has been accepted at the 2023 Artificial Intelligence for Sustainability (AI4S) Workshop, at 26th European Conference on Artificial Intelligence ECAI 2023

Reinforcement Learning for Battery Management in Dairy Farming

Authors: Nawazish Ali, Abdul Wahid, Rachael shaw, Karl Mason

Abstract: Dairy farming is a particularly energy-intensive part of the agriculture sector. Effective battery management is essential for renewable integration within the agriculture sector. However, controlling battery charging/discharging is a difficult task due to electricity demand variability, stochasticity of renewable generation, and energy price fluctuations. Despite the potential benefits of applyin… ▽ More Dairy farming is a particularly energy-intensive part of the agriculture sector. Effective battery management is essential for renewable integration within the agriculture sector. However, controlling battery charging/discharging is a difficult task due to electricity demand variability, stochasticity of renewable generation, and energy price fluctuations. Despite the potential benefits of applying Artificial Intelligence (AI) to renewable energy in the context of dairy farming, there has been limited research in this area. This research is a priority for Ireland as it strives to meet its governmental goals in energy and sustainability. This research paper utilizes Q-learning to learn an effective policy for charging and discharging a battery within a dairy farm setting. The results demonstrate that the developed policy significantly reduces electricity costs compared to the established baseline algorithm. These findings highlight the effectiveness of reinforcement learning for battery management within the dairy farming sector. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Comments: This paper has been accepted at the 2023 Artificial Intelligence for Sustainability (AI4S) Workshop, at 26th European Conference on Artificial Intelligence ECAI 2023

Integrating Renewable Energy in Agriculture: A Deep Reinforcement Learning-based Approach

Authors: A. Wahid, I faiud, K. Mason

Abstract: This article investigates the use of Deep Q-Networks (DQNs) to optimize decision-making for photovoltaic (PV) systems installations in the agriculture sector. The study develops a DQN framework to assist agricultural investors in making informed decisions considering factors such as installation budget, government incentives, energy requirements, system cost, and long-term benefits. By implementin… ▽ More This article investigates the use of Deep Q-Networks (DQNs) to optimize decision-making for photovoltaic (PV) systems installations in the agriculture sector. The study develops a DQN framework to assist agricultural investors in making informed decisions considering factors such as installation budget, government incentives, energy requirements, system cost, and long-term benefits. By implementing a reward mechanism, the DQN learns to make data-driven decisions on PV integration. The analysis provides a comprehensive understanding of how DQNs can support investors in making decisions about PV installations in agriculture. This research has significant implications for promoting sustainable and efficient farming practices while also paving the way for future advancements in this field. By leveraging DQNs, agricultural investors can make optimized decisions that improve energy efficiency, reduce environmental impact, and enhance profitability. This study contributes to the advancement of PV integration in agriculture and encourages further innovation in this promising area. △ Less

Submitted 16 August, 2023; originally announced August 2023.

Comments: This paper has been accepted at the 2023 Deep Learning for Precision Agriculture (DLSPA) Workshop, at The 2023 European Conference on Machine Learning and Principles and Practice of Knowledge Discovery in Databases (ECML PKDD)

Evolving Multi-Objective Neural Network Controllers for Robot Swarms

Authors: Karl Mason, Sabine Hauert

Abstract: Many swarm robotics tasks consist of multiple conflicting objectives. This research proposes a multi-objective evolutionary neural network approach to developing controllers for swarms of robots. The swarm robot controllers are trained in a low-fidelity Python simulator and then tested in a high-fidelity simulated environment using Webots. Simulations are then conducted to test the scalability of… ▽ More Many swarm robotics tasks consist of multiple conflicting objectives. This research proposes a multi-objective evolutionary neural network approach to developing controllers for swarms of robots. The swarm robot controllers are trained in a low-fidelity Python simulator and then tested in a high-fidelity simulated environment using Webots. Simulations are then conducted to test the scalability of the evolved multi-objective robot controllers to environments with a larger number of robots. The results presented demonstrate that the proposed approach can effectively control each of the robots. The robot swarm exhibits different behaviours as the weighting for each objective is adjusted. The results also confirm that multi-objective neural network controllers evolved in a low-fidelity simulator can be transferred to high-fidelity simulated environments and that the controllers can scale to environments with a larger number of robots without further retraining needed. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: This paper was presented at the 2023 Autonomous Robots and Multirobot Systems (ARMS) Workshop, at The 22nd International Conference on Autonomous Agents and Multiagent Systems (AAMAS 2023)

Simulated surface diffusion in nanoporous gold and its dependence on surface curvature

Authors: Conner Marie Winkeljohn, Sadi Md Shahriar, Erkin Seker, Jeremy K. Mason

Abstract: The morphological evolution of nanoporous gold is generally believed to be governed by surface diffusion. This work specifically explores the dependence of mass transport by surface diffusion on the curvature of a gold surface. The surface diffusivity is estimated by molecular dynamics simulations for a variety of surfaces of constant mean curvature, eliminating any chemical potential gradients an… ▽ More The morphological evolution of nanoporous gold is generally believed to be governed by surface diffusion. This work specifically explores the dependence of mass transport by surface diffusion on the curvature of a gold surface. The surface diffusivity is estimated by molecular dynamics simulations for a variety of surfaces of constant mean curvature, eliminating any chemical potential gradients and allowing the possible dependence of the surface diffusivity on mean curvature to be isolated. The apparent surface diffusivity is found to have an activation energy of ~0.74 eV with a weak dependence on curvature, but is consistent with the values reported in the literature. The apparent concentration of mobile surface atoms is found to be highly variable, having an Arrhenius dependence on temperature with an activation energy that also has a weak curvature dependence. These activation energies depend on curvature in such a way that the rate of mass transport by surface diffusion is nearly independent of curvature, but with a higher activation energy of ~1.01 eV. The curvature dependencies of the apparent surface diffusivity and concentration of mobile surface atoms is believed to be related to the expected lifetime of a mobile surface atom, and has the practical consequence that a simulation study that does not account for this finite lifetime could underestimate the activation energy for mass transport via surface diffusion by ~0.27 eV. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 14 pages, 12 figures

Evolutionary Strategy Guided Reinforcement Learning via MultiBuffer Communication

Authors: Adam Callaghan, Karl Mason, Patrick Mannion

Abstract: Evolutionary Algorithms and Deep Reinforcement Learning have both successfully solved control problems across a variety of domains. Recently, algorithms have been proposed which combine these two methods, aiming to leverage the strengths and mitigate the weaknesses of both approaches. In this paper we introduce a new Evolutionary Reinforcement Learning model which combines a particular family of E… ▽ More Evolutionary Algorithms and Deep Reinforcement Learning have both successfully solved control problems across a variety of domains. Recently, algorithms have been proposed which combine these two methods, aiming to leverage the strengths and mitigate the weaknesses of both approaches. In this paper we introduce a new Evolutionary Reinforcement Learning model which combines a particular family of Evolutionary algorithm called Evolutionary Strategies with the off-policy Deep Reinforcement Learning algorithm TD3. The framework utilises a multi-buffer system instead of using a single shared replay buffer. The multi-buffer system allows for the Evolutionary Strategy to search freely in the search space of policies, without running the risk of overpopulating the replay buffer with poorly performing trajectories which limit the number of desirable policy behaviour examples thus negatively impacting the potential of the Deep Reinforcement Learning within the shared framework. The proposed algorithm is demonstrated to perform competitively with current Evolutionary Reinforcement Learning algorithms on MuJoCo control tasks, outperforming the well known state-of-the-art CEM-RL on 3 of the 4 environments tested. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Comments: 9 pages, 4 figures, ALA 2023 workshop

First measurement of $η$ production in neutrino interactions on argon with MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (164 additional authors not shown)

Abstract: We present a measurement of $η$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $η$ production in neutrino interactions provides a powerful new probe of resonant interactions, comple… ▽ More We present a measurement of $η$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $η$ production in neutrino interactions provides a powerful new probe of resonant interactions, complementary to pion channels, and is particularly suited to the study of higher-order resonances beyond the $Δ(1232)$. We measure a flux-integrated cross section for neutrino-induced $η$ production on argon of $3.22 \pm 0.84 \; \textrm{(stat.)} \pm 0.86 \; \textrm{(syst.)}$ $10^{-41}{\textrm{cm}}^{2}$/nucleon. By demonstrating the successful reconstruction of the two photons resulting from $η$ production, this analysis enables a novel calibration technique for electromagnetic showers in GeV accelerator neutrino experiments. △ Less

Submitted 4 May, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

Report number: FERMILAB-PUB-23-249-ND

Journal ref: Phys. Rev. Lett. 132, 151801 Published 10 April 2024

Energetic contributions to deformation twinning in magnesium

Authors: Enver Kapan, Sertan Alkan, C. Can Aydıner, Jeremy K. Mason

Abstract: Modeling deformation twin nucleation in magnesium has proven to be a challenging task. In particular, the absence of a heterogeneous twin nucleation model which provides accurate energetic descriptions for twin-related structures belies a need to more deeply understand twin energetics. To address this problem, molecular dynamics simulations are performed to follow the energetic evolution of… ▽ More Modeling deformation twin nucleation in magnesium has proven to be a challenging task. In particular, the absence of a heterogeneous twin nucleation model which provides accurate energetic descriptions for twin-related structures belies a need to more deeply understand twin energetics. To address this problem, molecular dynamics simulations are performed to follow the energetic evolution of $\{10\overline{1}2\}$ tension twin embryos nucleating from an asymmetrically-tilted grain boundary. The line, surface and volumetric terms associated with twin nucleation are identified. A micromechanical model is proposed where the stress field around the twin nucleus is estimated using the Eshelby formalism, and the contributions of the various twin-related structures to the total energy of the twin are evaluated. The reduction in the grain boundary energy arising from the change in character of the prior grain boundary is found to be able to offset the energy costs of the other interfaces. The defect structures bounding the stacking faults that form inside the twin are also found to possibly have significant energetic contributions. These results suggest that both of these effects could be critical considerations when predicting twin nucleation sites in magnesium. △ Less

Submitted 12 July, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Comments: 14 pages, 14 figures

Inferring Preferences from Demonstrations in Multi-objective Reinforcement Learning: A Dynamic Weight-based Approach

Authors: Junlin Lu, Patrick Mannion, Karl Mason

Abstract: Many decision-making problems feature multiple objectives. In such problems, it is not always possible to know the preferences of a decision-maker for different objectives. However, it is often possible to observe the behavior of decision-makers. In multi-objective decision-making, preference inference is the process of inferring the preferences of a decision-maker for different objectives. This r… ▽ More Many decision-making problems feature multiple objectives. In such problems, it is not always possible to know the preferences of a decision-maker for different objectives. However, it is often possible to observe the behavior of decision-makers. In multi-objective decision-making, preference inference is the process of inferring the preferences of a decision-maker for different objectives. This research proposes a Dynamic Weight-based Preference Inference (DWPI) algorithm that can infer the preferences of agents acting in multi-objective decision-making problems, based on observed behavior trajectories in the environment. The proposed method is evaluated on three multi-objective Markov decision processes: Deep Sea Treasure, Traffic, and Item Gathering. The performance of the proposed DWPI approach is compared to two existing preference inference methods from the literature, and empirical results demonstrate significant improvements compared to the baseline algorithms, in terms of both time requirements and accuracy of the inferred preferences. The Dynamic Weight-based Preference Inference algorithm also maintains its performance when inferring preferences for sub-optimal behavior demonstrations. In addition to its impressive performance, the Dynamic Weight-based Preference Inference algorithm does not require any interactions during training with the agent whose preferences are inferred, all that is required is a trajectory of observed behavior. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Comments: This work is accepted by ALA 2023 Adaptive and Learning Agents Workshop at AAMAS, London, UK

Search for gravitational-lensing signatures in the full third observing run of the LIGO-Virgo network

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1670 additional authors not shown)

Abstract: Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated… ▽ More Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated signals from strong lensing by 1) performing targeted searches for subthreshold signals, 2) calculating the degree of overlap amongst the intrinsic parameters and sky location of pairs of signals, 3) comparing the similarities of the spectrograms amongst pairs of signals, and 4) performing dual-signal Bayesian analysis that takes into account selection effects and astrophysical knowledge. We also search for distortions to the gravitational waveform caused by 1) frequency-independent phase shifts in strongly lensed images, and 2) frequency-dependent modulation of the amplitude and phase due to point masses. None of these searches yields significant evidence for lensing. Finally, we use the non-detection of gravitational-wave lensing to constrain the lensing rate based on the latest merger-rate estimates and the fraction of dark matter composed of compact objects. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 28 pages, 11 figures

Report number: LIGO-P2200031

First demonstration of $\mathcal{O}(1\,\text{ns})$ timing resolution in the MicroBooNE liquid argon time projection chamber

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao, D. Caratelli , et al. (163 additional authors not shown)

Abstract: MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combi… ▽ More MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combining light signals and reconstructed tracks are applied to achieve a neutrino interaction time resolution of $\mathcal{O}(1\,\text{ns})$. The result obtained allows MicroBooNE to access the ns neutrino pulse structure of the BNB for the first time. The timing resolution achieved will enable significant enhancement of cosmic background rejection for all neutrino analyses. Furthermore, the ns timing resolution opens new avenues to search for long-lived-particles such as heavy neutral leptons in MicroBooNE, as well as in future large LArTPC experiments, namely the SBN program and DUNE. △ Less

Submitted 29 August, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, P. Amedo, J. Anderson, D. A. Andrade , et al. (1294 additional authors not shown)

Abstract: A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics… ▽ More A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $σ(E_ν)$ for charged-current $ν_e$ absorption on argon. In the context of a simulated extraction of supernova $ν_e$ spectral parameters from a toy analysis, we investigate the impact of $σ(E_ν)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $σ(E_ν)$ must be substantially reduced before the $ν_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $σ(E_ν)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $σ(E_ν)$. A direct measurement of low-energy $ν_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level. △ Less

Submitted 7 July, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: 25 pages, 21 figures

Report number: FERMILAB-PUB-23-132-CSAID-LBNF-ND-T

Journal ref: Phys. Rev. D 107, 112012 (2023)

Open data from the third observing run of LIGO, Virgo, KAGRA and GEO

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Al-Jodah, C. Alléné, A. Allocca , et al. (1719 additional authors not shown)

Abstract: The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasti… ▽ More The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 27 pages, 3 figures

Report number: LIGO-P2200316

Dependence of simulated radiation damage on crystal structure and atomic misfit in metals

Authors: Jared C. Stimac, Chad Serrao, Jeremy K. Mason

Abstract: This study investigates radiation damage in three metals in the low temperature and high radiant flux regime using molecular dynamics and a Frenkel pair accumulation method to simulate up to $2.0$ displacements per atom. The metals considered include Fe, equiatomic CrCoNi, and a fictitious metal with identical bulk properties to the CrCoNi composed of a single atom type referred to as an A-atom. C… ▽ More This study investigates radiation damage in three metals in the low temperature and high radiant flux regime using molecular dynamics and a Frenkel pair accumulation method to simulate up to $2.0$ displacements per atom. The metals considered include Fe, equiatomic CrCoNi, and a fictitious metal with identical bulk properties to the CrCoNi composed of a single atom type referred to as an A-atom. CrCoNi is found to sustain higher concentrations of dislocations than either the Fe or A-atom systems and more stacking faults than the A-atom system. The results suggest that the concentration of vacancies and interstitials are substantially higher for the CrCoNi than the A-atom system, perhaps reflecting that the recombination radius is smaller in CrCoNi due to the roughened potential energy landscape. A model that partitions the major contributions from defects to the stored energy is described, and serves to highlight a general need for higher fidelity approaches to point defect identification. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Report number: LLNL-JRNL-839942-DRAFT

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Journal ref: JINST 2023 18 P04034

First measurement of quasi-elastic $Λ$ baryon production in muon anti-neutrino interactions in the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas, F. Cavanna , et al. (161 additional authors not shown)

Abstract: We present the first measurement of the cross section of Cabibbo-suppressed $Λ$ baryon production, using data collected with the MicroBooNE detector when exposed to the neutrinos from the Main Injector beam at the Fermi National Accelerator Laboratory. The data analyzed correspond to $2.2 \times 10^{20}$ protons on target of neutrino mode running and $4.9 \times 10^{20}$ protons on target of anti-… ▽ More We present the first measurement of the cross section of Cabibbo-suppressed $Λ$ baryon production, using data collected with the MicroBooNE detector when exposed to the neutrinos from the Main Injector beam at the Fermi National Accelerator Laboratory. The data analyzed correspond to $2.2 \times 10^{20}$ protons on target of neutrino mode running and $4.9 \times 10^{20}$ protons on target of anti-neutrino mode running. An automated selection is combined with hand scanning, with the former identifying five candidate $Λ$ production events when the signal was unblinded, consistent with the GENIE prediction of $5.3 \pm 1.1$ events. Several scanners were employed, selecting between three and five events, compared with a prediction from a blinded Monte Carlo simulation study of $3.7 \pm 1.0$ events. Restricting the phase space to only include $Λ$ baryons that decay above MicroBooNE's detection thresholds, we obtain a flux averaged cross section of $2.0^{+2.2}_{-1.7} \times 10^{-40}$ cm$^2/$Ar, where statistical and systematic uncertainties are combined. △ Less

Submitted 9 June, 2023; v1 submitted 15 December, 2022; originally announced December 2022.

Report number: FERMILAB-PUB-22-925-ND

Search for subsolar-mass black hole binaries in the second part of Advanced LIGO's and Advanced Virgo's third observing run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1680 additional authors not shown)

Abstract: We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate t… ▽ More We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate the sensitivity of our search over the entirety of Advanced LIGO's and Advanced Virgo's third observing run, and present the most stringent limits to date on the merger rate of binary black holes with at least one subsolar-mass component. We use the upper limits to constrain two fiducial scenarios that could produce subsolar-mass black holes: primordial black holes (PBH) and a model of dissipative dark matter. The PBH model uses recent prescriptions for the merger rate of PBH binaries that include a rate suppression factor to effectively account for PBH early binary disruptions. If the PBHs are monochromatically distributed, we can exclude a dark matter fraction in PBHs $f_\mathrm{PBH} \gtrsim 0.6$ (at 90% confidence) in the probed subsolar-mass range. However, if we allow for broad PBH mass distributions we are unable to rule out $f_\mathrm{PBH} = 1$. For the dissipative model, where the dark matter has chemistry that allows a small fraction to cool and collapse into black holes, we find an upper bound $f_{\mathrm{DBH}} < 10^{-5}$ on the fraction of atomic dark matter collapsed into black holes. △ Less

Submitted 26 January, 2024; v1 submitted 2 December, 2022; originally announced December 2022.

Comments: https://dcc.ligo.org/P2200139

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Search for gravitational-wave transients associated with magnetar bursts in Advanced LIGO and Advanced Virgo data from the third observing run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Allocca, P. A. Altin , et al. (1645 additional authors not shown)

Abstract: Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant flares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and long-duration ($\sim$ 100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo and KAGRA's third observation run. These 13 bu… ▽ More Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant flares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and long-duration ($\sim$ 100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo and KAGRA's third observation run. These 13 bursts come from two magnetars, SGR 1935$+$2154 and Swift J1818.0$-$1607. We also include three other electromagnetic burst events detected by Fermi GBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper bounds on the root-sum-square of the integrated gravitational-wave strain that reach $2.2 \times 10^{-23}$ $/\sqrt{\text{Hz}}$ at 100 Hz for the short-duration search and $8.7 \times 10^{-23}$ $/\sqrt{\text{Hz}}$ at $450$ Hz for the long-duration search, given a detection efficiency of 50%. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to $1.8 \times 10^{-22}$ $/\sqrt{\text{Hz}}$. Using the estimated distance to each magnetar, we derive upper bounds on the emitted gravitational-wave energy of $3.2 \times 10^{43}$ erg ($7.3 \times 10^{43}$ erg) for SGR 1935$+$2154 and $8.2 \times 10^{42}$ erg ($2.8 \times 10^{43}$ erg) for Swift J1818.0$-$1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst fluences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935$+$2154 with available fluence information. The lowest of these ratios is $3 \times 10^3$. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: 30 pages with appendices, 5 figures, 10 tables

Report number: LIGO-P2100387

First constraints on light sterile neutrino oscillations from combined appearance and disappearance searches with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas , et al. (162 additional authors not shown)

Abstract: We present a search for eV-scale sterile neutrino oscillations in the MicroBooNE liquid argon detector, simultaneously considering all possible appearance and disappearance effects within the $3+1$ active-to-sterile neutrino oscillation framework. We analyze the neutrino candidate events for the recent measurements of charged-current $ν_e$ and $ν_μ$ interactions in the MicroBooNE detector, using d… ▽ More We present a search for eV-scale sterile neutrino oscillations in the MicroBooNE liquid argon detector, simultaneously considering all possible appearance and disappearance effects within the $3+1$ active-to-sterile neutrino oscillation framework. We analyze the neutrino candidate events for the recent measurements of charged-current $ν_e$ and $ν_μ$ interactions in the MicroBooNE detector, using data corresponding to an exposure of 6.37$\times$10$^{20}$ protons on target from the Fermilab booster neutrino beam. We observe no evidence of light sterile neutrino oscillations and derive exclusion contours at the $95\%$ confidence level in the plane of the mass-squared splitting $Δm^2_{41}$ and the sterile neutrino mixing angles $θ_{μe}$ and $θ_{ee}$, excluding part of the parameter space allowed by experimental anomalies. Cancellation of $ν_e$ appearance and $ν_e$ disappearance effects due to the full $3+1$ treatment of the analysis leads to a degeneracy when determining the oscillation parameters, which is discussed in this paper and will be addressed by future analyses. △ Less

Submitted 6 December, 2022; v1 submitted 18 October, 2022; originally announced October 2022.

Comments: 9 pages, 4 figures; supplemental: 6 pages, 8 figures

Report number: FERMILAB-PUB-22-750-ND

Journal ref: Phys. Rev. Lett. 130, 011801 (2023)

Uncertainty-Aware Lidar Place Recognition in Novel Environments

Authors: Keita Mason, Joshua Knights, Milad Ramezani, Peyman Moghadam, Dimity Miller

Abstract: State-of-the-art lidar place recognition models exhibit unreliable performance when tested on environments different from their training dataset, which limits their use in complex and evolving environments. To address this issue, we investigate the task of uncertainty-aware lidar place recognition, where each predicted place must have an associated uncertainty that can be used to identify and reje… ▽ More State-of-the-art lidar place recognition models exhibit unreliable performance when tested on environments different from their training dataset, which limits their use in complex and evolving environments. To address this issue, we investigate the task of uncertainty-aware lidar place recognition, where each predicted place must have an associated uncertainty that can be used to identify and reject incorrect predictions. We introduce a novel evaluation protocol and present the first comprehensive benchmark for this task, testing across five uncertainty estimation techniques and three large-scale datasets. Our results show that an Ensembles approach is the highest performing technique, consistently improving the performance of lidar place recognition and uncertainty estimation in novel environments, though it incurs a computational cost. Code is publicly available at https://github.com/csiro-robotics/Uncertainty-LPR. △ Less

Submitted 11 July, 2023; v1 submitted 4 October, 2022; originally announced October 2022.

Comments: 8 pages, 4 figures. Accepted for publication at IEEE IROS 2023

Model-based cross-correlation search for gravitational waves from the low-mass X-ray binary Scorpius X-1 in LIGO O3 data

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1670 additional authors not shown)

Abstract: We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to bala… ▽ More We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to balance sensitivity with computing cost. The search covered a range of gravitational-wave frequencies from 25Hz to 1600Hz, as well as ranges in orbital speed, frequency and phase determined from observational constraints. No significant detection candidates were found, and upper limits were set as a function of frequency. The most stringent limits, between 100Hz and 200Hz, correspond to an amplitude h0 of about 1e-25 when marginalized isotropically over the unknown inclination angle of the neutron star's rotation axis, or less than 4e-26 assuming the optimal orientation. The sensitivity of this search is now probing amplitudes predicted by models of torque balance equilibrium. For the usual conservative model assuming accretion at the surface of the neutron star, our isotropically-marginalized upper limits are close to the predicted amplitude from about 70Hz to 100Hz; the limits assuming the neutron star spin is aligned with the most likely orbital angular momentum are below the conservative torque balance predictions from 40Hz to 200Hz. Assuming a broader range of accretion models, our direct limits on gravitational-wave amplitude delve into the relevant parameter space over a wide range of frequencies, to 500Hz or more. △ Less

Submitted 2 January, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 19 pages, Open Access Journal PDF

Report number: LIGO-P2100110-v13

Journal ref: The Astrophysical Journal Letters, 941, L30 (2022)

Differential cross section measurement of charged current $ν_{e}$ interactions without final-state pions in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, J. Barrow, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas , et al. (161 additional authors not shown)

Abstract: In this letter we present the first measurements of an exclusive electron neutrino cross section with the MicroBooNE experiment using data from the Booster Neutrino Beamline at Fermilab. These measurements are made for a selection of charged-current electron neutrinos without final-state pions. Differential cross sections are extracted in energy and angle with respect to the beam for the electron… ▽ More In this letter we present the first measurements of an exclusive electron neutrino cross section with the MicroBooNE experiment using data from the Booster Neutrino Beamline at Fermilab. These measurements are made for a selection of charged-current electron neutrinos without final-state pions. Differential cross sections are extracted in energy and angle with respect to the beam for the electron and the leading proton. The differential cross section as a function of proton energy is measured using events with protons both above and below the visibility threshold. This is done by including a separate selection of electron neutrino events without reconstructed proton candidates in addition to those with proton candidates. Results are compared to the predictions from several modern generators, and we find the data agrees well with these models. The data shows best agreement, as quantified by $p$-value, with the generators that predict a lower overall cross section, such as GENIE v3 and NuWro. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Report number: FERMILAB-PUB-22-573-ND-SCD

A combinatorial interpretation of the noncommutative inverse Kostka matrix

Authors: Edward E Allen, Sarah K Mason

Abstract: We provide a combinatorial formula for the expansion of immaculate noncommutative symmetric functions into complete homogeneous noncommutative symmetric functions. To do this, we introduce generalizations of Ferrers diagrams which we call GBPR diagrams. We define tunnel hooks, which play a role similar to that of the special rim hooks appearing in the Eğecioğlu-Remmel formula for the symmetric inv… ▽ More We provide a combinatorial formula for the expansion of immaculate noncommutative symmetric functions into complete homogeneous noncommutative symmetric functions. To do this, we introduce generalizations of Ferrers diagrams which we call GBPR diagrams. We define tunnel hooks, which play a role similar to that of the special rim hooks appearing in the Eğecioğlu-Remmel formula for the symmetric inverse Kostka matrix. We extend this interpretation to skew shapes and fully generalize to define immaculate functions indexed by integer sequences skewed by integer sequences. Finally, as an application of our combinatorial formula, we extend Campbell's results on ribbon decompositions of immaculate functions to a larger class of shapes. △ Less

Submitted 6 October, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 44 pages, 15 figures; corrected typos; revised arguments in Section 6, results unchanged

MSC Class: 05E05

Search for long-lived heavy neutral leptons and Higgs portal scalars decaying in the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, J. Barrow, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas , et al. (163 additional authors not shown)

Abstract: We present a search for long-lived Higgs portal scalars (HPS) and heavy neutral leptons (HNL) decaying in the MicroBooNE liquid-argon time projection chamber. The measurement is performed using data collected synchronously with the NuMI neutrino beam from Fermilab's Main Injector with a total exposure corresponding to $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confi… ▽ More We present a search for long-lived Higgs portal scalars (HPS) and heavy neutral leptons (HNL) decaying in the MicroBooNE liquid-argon time projection chamber. The measurement is performed using data collected synchronously with the NuMI neutrino beam from Fermilab's Main Injector with a total exposure corresponding to $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confidence level on the mixing parameter $\lvert U_{μ4}\rvert^2$ ranging from $\lvert U_{μ4}\rvert^2<12.9\times 10^{-8}$ for Majorana HNLs with a mass of $m_{\rm HNL}=246$ MeV to $\lvert U_{μ4}\rvert^2<0.92 \times 10^{-8}$ for $m_{\rm HNL}=385$ MeV, assuming $\lvert U_{e 4}\rvert^2 = \lvert U_{τ4}\rvert^2 = 0$ and HNL decays into $μ^\pmπ^\mp$ pairs. These limits on $\lvert U_{μ4}\rvert^2$ represent an order of magnitude improvement in sensitivity compared to the previous MicroBooNE result. We also constrain the scalar-Higgs mixing angle $θ$ by searching for HPS decays into $μ^+μ^-$ final states, excluding a contour in the parameter space with lower bounds of $θ^2<31.3 \times 10^{-9}$ for $m_{\rm HPS}=212$ GeV and $θ^2<1.09 \times 10^{-9}$ for $m_{\rm HPS}=275$ GeV. These are the first constraints on the scalar-Higgs mixing angle $θ$ from a dedicated experimental search in this mass range. △ Less

Submitted 6 December, 2022; v1 submitted 8 July, 2022; originally announced July 2022.

Comments: This paper is dedicated to the memory of Salvatore Davide Porzio. This is the journal accepted version with only minor presentational changes compared to preprint

Report number: FERMILAB-PUB-22-507

Journal ref: Phys. Rev. D 106, 092006 (2022)

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Measurement of neutral current single $π^0$ production on argon with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, J. Barrow, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas , et al. (170 additional authors not shown)

Abstract: We report the first measurement of $π^0$ production in neutral current (NC) interactions on argon with average neutrino energy of $\lesssim1$~GeV. We use data from the MicroBooNE detector's 85-tonne active volume liquid argon time projection chamber situated in Fermilab's Booster Neutrino Beam and exposed to $5.89\times10^{20}$ protons on target for this measurement. Measurements of NC $π^0$ event… ▽ More We report the first measurement of $π^0$ production in neutral current (NC) interactions on argon with average neutrino energy of $\lesssim1$~GeV. We use data from the MicroBooNE detector's 85-tonne active volume liquid argon time projection chamber situated in Fermilab's Booster Neutrino Beam and exposed to $5.89\times10^{20}$ protons on target for this measurement. Measurements of NC $π^0$ events are reported for two exclusive event topologies without charged pions. Those include a topology with two photons from the decay of the $π^0$ and one proton and a topology with two photons and zero protons. Flux-averaged cross-sections for each exclusive topology and for their semi-inclusive combination are extracted (efficiency-correcting for two-plus proton final states), and the results are compared to predictions from the \textsc{genie}, \textsc{neut}, and \textsc{NuWro} neutrino event generators. We measure cross sections of $1.243\pm0.185$ (syst) $\pm0.076$ (stat), $0.444\pm0.098\pm0.047$, and $0.624\pm0.131\pm0.075$ $[10^{-38}\textrm{cm}^2/\textrm{Ar}]$ for the semi-inclusive NC$π^0$, exclusive NC$π^0$+1p, and exclusive NC$π^0$+0p processes, respectively. △ Less

Submitted 8 December, 2022; v1 submitted 16 May, 2022; originally announced May 2022.

Comments: 16 pages, 14 figures, 2 tables

Report number: FERMILAB-PUB-22-412-ND-SCD

Energy storage under high-rate compression of single crystal tantalum

Authors: Jared C. Stimac, Nicolas Bertin, Jeremy K. Mason, Vasily V. Bulatov

Abstract: When a material is plastically deformed the majority of mechanical work is dissipated as heat, and the fraction of plastic work converted into heat is known as the Taylor-Quinney coefficient (TQC). Large-scale molecular dynamics simulations were performed of high strain rate compression of single-crystal tantalum, and the resulting integral and differential TQC values are reported up to true strai… ▽ More When a material is plastically deformed the majority of mechanical work is dissipated as heat, and the fraction of plastic work converted into heat is known as the Taylor-Quinney coefficient (TQC). Large-scale molecular dynamics simulations were performed of high strain rate compression of single-crystal tantalum, and the resulting integral and differential TQC values are reported up to true strains of 1.0. A phenomenological model is proposed for the energy stored in the material as a function of time with an asymptotic limit for this energy defined by the deformation conditions. The model reasonably describes the convergence of TQC values to 1.0 with increasing plastic strain, but does not directly address the physical nature of thermo-mechanical conversion. This is instead developed in a second more detailed model that accurately accounts for energy storage in two distinct contributions, one being the growing dislocation network and the other the point defect debris left behind by the moving dislocations. The contribution of the point defect debris is found to lag behind that of the dislocation network but to be substantial under the high-rate straining conditions considered here. △ Less

Submitted 5 August, 2022; v1 submitted 9 May, 2022; originally announced May 2022.

Comments: 28 pages, 12 figures

Report number: LLNL-JRNL-835041-DRAFT

Search for continuous gravitational wave emission from the Milky Way center in O3 LIGO--Virgo data

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Allocca, P. A. Altin , et al. (1645 additional authors not shown)

Abstract: We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo… ▽ More We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo run in the detector frequency band $[10,2000]\rm~Hz$ have been used. No significant detection was found and 95$\%$ confidence level upper limits on the signal strain amplitude were computed, over the full search band, with the deepest limit of about $7.6\times 10^{-26}$ at $\simeq 142\rm~Hz$. These results are significantly more constraining than those reported in previous searches. We use these limits to put constraints on the fiducial neutron star ellipticity and r-mode amplitude. These limits can be also translated into constraints in the black hole mass -- boson mass plane for a hypothetical population of boson clouds around spinning black holes located in the GC. △ Less

Submitted 9 April, 2022; originally announced April 2022.

Comments: 25 pages, 5 figures