-
On the computation of stable coupled state-space models for dynamic substructuring applications
Authors:
R. S. O. Dias,
M. Martarelli,
P. Chiariotti
Abstract:
This paper aims at introducing a methodology to compute stable coupled state-space models for dynamic substructuring applications by introducing two novel approaches targeted to accomplish this task: a) a procedure to impose Newtons's second law without relying on the use of undamped RCMs (residual compensation modes) and b) a novel approach to impose stability on unstable coupled state-space mode…
▽ More
This paper aims at introducing a methodology to compute stable coupled state-space models for dynamic substructuring applications by introducing two novel approaches targeted to accomplish this task: a) a procedure to impose Newtons's second law without relying on the use of undamped RCMs (residual compensation modes) and b) a novel approach to impose stability on unstable coupled state-space models. The enforcement of stability is performed by dividing the unstable model into two different models, one composed by the stable poles (stable model) and the other composed by the unstable ones (unstable model). Then, the poles of the unstable state-space model are forced to be stable, leading to the computation of a stabilized state-space model. Afterwards, to make sure that the Frequency Response Functions (FRFs) of the stabilized model well match the FRFs of the unstable model, the Least-Squares Frequency Domain (LSFD) method is exploited to update the modal parameters of the stabilized model composed by the pairs of complex conjugate poles. The validity of the proposed methodologies is presented and discussed by exploiting experimental data. Indeed, by exploiting the FRFs of a real system, accurate state-space models respecting Newton's second law are computed. Then, decoupling and coupling operations are performed with the identified state-space models, no matter the models resultant from the decoupling/coupling operations are unstable. Stability is then imposed on the computed unstable coupled model by following the approach proposed in this paper. The methodology proved to work well on these data. Moreover, the paper also shows that the coupled state-space models obtained using this methodology are suitable to be exploited in time-domain analyses and simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
On the use of Lagrange Multiplier State-Space Substructuring in dynamic substructuring analysis
Authors:
Rafael Da Silva Oliveira Dias,
Milena Martarelli,
Paolo Chiariotti
Abstract:
In this article, the formulation of Lagrange Multiplier State-Space Substructuring (LM-SSS) is presented and extended to directly compute coupled displacement and velocity state-space models. The LM-SSS method is applied to couple and decouple state-space models established in the modal domain. Moreover, it is used together with tailored postprocessing procedures to eliminate the redundant states…
▽ More
In this article, the formulation of Lagrange Multiplier State-Space Substructuring (LM-SSS) is presented and extended to directly compute coupled displacement and velocity state-space models. The LM-SSS method is applied to couple and decouple state-space models established in the modal domain. Moreover, it is used together with tailored postprocessing procedures to eliminate the redundant states originated from the coupling and decoupling operations. This specific formulation of the LM-SSS approach made it possible to develop a tailored coupling form, named Unconstrained Coupling Form (UCF). UCF just requires the computation of a nullspace and does not rely on the selection of a subspace from a nullspace. By exploiting a numerical example, LM-SSS was compared with the Lagrange Multiplier Frequency Based Substructuring (LMFBS) approach, which is currently widely recognized as a reference approach. This was done both in terms of: a)coupled FRFs derived by coupling the state-space models of two substructures and b) decoupled FRFs derived by decoupling the state-space model of a component from the coupled model. LM-SSS showed to be suitable to compute minimal order coupled models and UCF turned out to have similar performance as other coupling forms already presented to the scientific community. As for the decoupling task, the FRFs derived from the LM-SSS approach perfectly matched those obtained by LM-FBS. Moreover, it was also demonstrated that the elimination of the redundant states originated from the decoupling operation was correctly performed. The approaches discussed were exploited on an experimental substructuring application. LM-SSS resulted to be a reliable SSS technique to perform coupling and decoupling operations with state-space models estimated from measured FRFs as well as to provide accurate minimal-order models.
△ Less
Submitted 6 February, 2023;
originally announced March 2023.
-
Including connecting elements into the Lagrange multiplier state-space substructuring formulation
Authors:
Rafael Da Silva Oliveira Dias,
Milena Martarelli,
Paolo Chiariotti
Abstract:
This paper extends the inverse substructuring (IS) approach to the state-space domain and presents a novel state-space substructuring (SSS) technique that embeds the dynamics of connecting elements (CEs) in the Lagrange Multiplier State-Space Substructuring (LM-SSS) formulation via compatibility relaxation. This coupling approach makes it possible to incorporate into LM-SSS connecting elements tha…
▽ More
This paper extends the inverse substructuring (IS) approach to the state-space domain and presents a novel state-space substructuring (SSS) technique that embeds the dynamics of connecting elements (CEs) in the Lagrange Multiplier State-Space Substructuring (LM-SSS) formulation via compatibility relaxation. This coupling approach makes it possible to incorporate into LM-SSS connecting elements that are suitable for being characterized by inverse substructuring (e.g. rubber mounts) by simply using information from one of its off diagonal apparent mass terms. Therefore, the information obtained from an in-situ experimental characterization of the CEs is enough to include them into the coupling formulation. Moreover, LM-SSS with compatibility relaxation makes it possible to couple an unlimited number of components and CEs, requiring only one matrix inversion to compute the coupled state-space model (SSM). Two post-processing procedures to enable the computation of minimal-order coupled models by using this approach are also presented. Numerical and experimental substructuring applications are exploited to prove the validity of the proposed methods. It is found that the IS approach can be accurately applied on state-space models representative of components linked by CEs to identify models representative of the diagonal apparent mass terms of the CEs, provided that the CEs can be accurately characterized by the underlying assumptions of IS. In this way, state-space models representative of experimentally characterized CEs can be found without performing decoupling operations. Hence, these models are not contaminated with spurious states. Furthermore, it was found that the developed coupling approach is reliable, when the dynamics of the CEs can be accurately characterized by IS, thus making it possible to compute reliable coupled models that are not composed by spurious states.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
R\&D evaluation methodology based on group-AHP with uncertainty
Authors:
Alberto Garinei,
Emanuele Piccioni,
Massimiliano Proietti,
Andrea Marini,
Stefano Speziali,
Marcello Marconi,
Raffaella Di Sante,
Sara Casaccia,
Paolo Castellini,
Milena Martarelli,
Nicola Paone,
Gian Marco Revel,
Lorenzo Scalise,
Marco Arnesano,
Paolo Chiariotti,
Roberto Montanini,
Antonino Quattrocchi,
Sergio Silvestri,
Giorgio Ficco,
Emanuele Rizzuto,
Andrea Scorza,
Matteo Lancini,
Gianluca Rossi,
Roberto Marsili,
Emanuele Zappa
, et al. (3 additional authors not shown)
Abstract:
In this paper, we present an approach to evaluate Research \& Development (R\&D) performance based on the Analytic Hierarchy Process (AHP) method. Through a set of questionnaires submitted to a team of experts, we single out a set of indicators needed for R\&D performance evaluation. The indicators, together with the corresponding criteria, form the basic hierarchical structure of the AHP method.…
▽ More
In this paper, we present an approach to evaluate Research \& Development (R\&D) performance based on the Analytic Hierarchy Process (AHP) method. Through a set of questionnaires submitted to a team of experts, we single out a set of indicators needed for R\&D performance evaluation. The indicators, together with the corresponding criteria, form the basic hierarchical structure of the AHP method. The numerical values associated with all the indicators are then used to assign a score to a given R\&D project. In order to aggregate consistently the values taken on by the different indicators, we operate on them so that they are mapped to dimensionless quantities lying in a unit interval. This is achieved by employing the empirical Cumulative Density Function (CDF) for each of the indicators. We give a thorough discussion on how to assign a score to an R\&D project along with the corresponding uncertainty due to possible inconsistencies of the decision process. A particular example of R\&D performance is finally considered.
△ Less
Submitted 22 November, 2021; v1 submitted 5 August, 2021;
originally announced August 2021.
