Showing 1–50 of 299 results for author: Martínez, E

Climate impacts and monetary costs of healthy diets worldwide

Authors: Yan Bai, Elena M. Martinez, Mizuki Yamanaka, Marko Rissanen, Anna Herforth, William A. Masters

Abstract: About 2.8 billion people worldwide cannot afford the least expensive foods required for a healthy diet. Since 2020, the Cost and Affordability of a Healthy Diet (CoAHD) has been published for all countries by FAO and the World Bank and is widely used to guide social protection, agricultural, and public health and nutrition policies. Here, we measure how healthy diets could be obtained with the low… ▽ More About 2.8 billion people worldwide cannot afford the least expensive foods required for a healthy diet. Since 2020, the Cost and Affordability of a Healthy Diet (CoAHD) has been published for all countries by FAO and the World Bank and is widely used to guide social protection, agricultural, and public health and nutrition policies. Here, we measure how healthy diets could be obtained with the lowest possible greenhouse gas (GHG) emissions, in ways that could further inform food choice and policy decisions toward sustainability goals. We find that the lowest possible GHG emissions for a healthy diet in 2021 would emit 0.67 kg CO2e (SD=0.10) and cost USD 6.95 (SD=1.86) per day, while each country's lowest-priced items would emit 1.65 kg CO2e (SD=0.56) and cost USD 3.68 (SD=0.75). Healthy diets with foods in proportions actually consumed in each country would emit 2.44 kg CO2e (SD=1.27) and cost USD 9.96 (SD=4.92). Differences in emissions are driven by item selection within animal-source foods, and starchy staples to a lesser extent, with only minor differences in other food groups. Results show how changes in agricultural policy and food choice can most cost-effectively support healthier and more sustainable diets worldwide. △ Less

Submitted 30 May, 2025; originally announced May 2025.

Leveraging biased noise for more efficient quantum error correction at the circuit-level with two-level qubits

Authors: Josu Etxezarreta Martinez, Paul Schnabl, Javier Oliva del Moral, Reza Dastbasteh, Pedro M. Crespo, Ruben M. Otxoa

Abstract: Tailoring quantum error correction codes (QECC) to biased noise has demonstrated significant benefits. However, most of the prior research on this topic has focused on code capacity noise models. Furthermore, a no-go theorem prevents the construction of CNOT gates for two-level qubits in a bias preserving manner which may, in principle, imply that noise bias cannot be leveraged in such systems. In… ▽ More Tailoring quantum error correction codes (QECC) to biased noise has demonstrated significant benefits. However, most of the prior research on this topic has focused on code capacity noise models. Furthermore, a no-go theorem prevents the construction of CNOT gates for two-level qubits in a bias preserving manner which may, in principle, imply that noise bias cannot be leveraged in such systems. In this work, we show that a residual bias up to $η\sim$5 can be maintained in CNOT gates under certain conditions. Moreover, we employ controlled-phase (CZ) gates in syndrome extraction circuits and show how to natively implement these in a bias-preserving manner for a broad class of qubit platforms. This motivates the introduction of what we call a hybrid biased-depolarizing (HBD) circuit-level noise model which captures these features. We numerically study the performance of the XZZX surface code and observe that bias-preserving CZ gates are critical for leveraging biased noise. Accounting for the residual bias present in the CNOT gates, we observe an increase in the code threshold up to a $1.27\%$ physical error rate, representing a $90\%$ improvement. Additionally, we find that the required qubit footprint can be reduced by up to a $75\%$ at relevant physical error rates. △ Less

Submitted 23 May, 2025; originally announced May 2025.

Rate Analysis of Dislocations Overcoming Elastic Barriers: Effects of Entropy and Langevin Friction via Kramers Theory

Authors: Mohammadhossein Nahavandian, Liam Myhill, Enrique Martinez

Abstract: Thermal activation of dislocations is critical for predicting the mechanical response of materials under common experimental conditions. According to transition state theory (TST), the rate for the system to overcome free energy barriers depends on an attempt frequency, activation free energy, and temperature. We computed the rate for edge and screw dislocation dipoles to overcome their interactio… ▽ More Thermal activation of dislocations is critical for predicting the mechanical response of materials under common experimental conditions. According to transition state theory (TST), the rate for the system to overcome free energy barriers depends on an attempt frequency, activation free energy, and temperature. We computed the rate for edge and screw dislocation dipoles to overcome their interaction fields at various temperatures, Langevin friction coefficients, and shear stresses using Molecular Dynamics (MD), Schoeck entropy formalism and compared with Kramers rate theory. Rates computed dynamically show dependence on Langevin friction, increasing with weaker friction and showing more correlated events. Statically, using Schoeck formalism and computing the minimum energy path (MEP), we found significant entropic effects at high temperature and a transition from Arrhenius to non-Arrhenius behavior near the critical resolved shear stress values for both edge and screw characters. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Full-field surrogate modeling of cardiac function encoding geometric variability

Authors: Elena Martinez, Beatrice Moscoloni, Matteo Salvador, Fanwei Kong, Mathias Peirlinck, Alison Lesley Marsden

Abstract: Combining physics-based modeling with data-driven methods is critical to enabling the translation of computational methods to clinical use in cardiology. The use of rigorous differential equations combined with machine learning tools allows for model personalization with uncertainty quantification in time frames compatible with clinical practice. However, accurate and efficient surrogate models of… ▽ More Combining physics-based modeling with data-driven methods is critical to enabling the translation of computational methods to clinical use in cardiology. The use of rigorous differential equations combined with machine learning tools allows for model personalization with uncertainty quantification in time frames compatible with clinical practice. However, accurate and efficient surrogate models of cardiac function, built from physics-based numerical simulation, are still mostly geometry-specific and require retraining for different patients and pathological conditions. We propose a novel computational pipeline to embed cardiac anatomies into full-field surrogate models. We generate a dataset of electrophysiology simulations using a complex multi-scale mathematical model coupling partial and ordinary differential equations. We adopt Branched Latent Neural Maps (BLNMs) as an effective scientific machine learning method to encode activation maps extracted from physics-based numerical simulations into a neural network. Leveraging large deformation diffeomorphic metric mappings, we build a biventricular anatomical atlas and parametrize the anatomical variability of a small and challenging cohort of 13 pediatric patients affected by Tetralogy of Fallot. We propose a novel statistical shape modeling based z-score sampling approach to generate a new synthetic cohort of 52 biventricular geometries that are compatible with the original geometrical variability. This synthetic cohort acts as the training set for BLNMs. Our surrogate model demonstrates robustness and great generalization across the complex original patient cohort, achieving an average adimensional mean squared error of 0.0034. The Python implementation of our BLNM model is publicly available under MIT License at https://github.com/StanfordCBCL/BLNM. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Comments: 34 pages, 19 figures

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

Authors: Morteza Aghaee, Zulfi Alam, Mariusz Andrzejczuk, Andrey E. Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Samuel Boutin, Benjamin J. Chapman, Sohail Chatoor, Anna Wulff Christensen, Patrick Codd, William S. Cole, Paul Cooper, Fabiano Corsetti, Ajuan Cui, Andreas Ekefjärd, Saeed Fallahi , et al. (105 additional authors not shown)

Abstract: The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscr… ▽ More The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944. △ Less

Submitted 17 April, 2025; originally announced April 2025.

Comments: Response to arXiv:2502.19560 and arXiv:2503.08944. 11 pages, 5 figures, 2 tables, code for reproduction

Role of Heat Transport in All-Optical Helicity-Independent Magnetization Switching

Authors: V. Raposo, J. Hohlfeld, S. Mangin, E. Martínez

Abstract: Single-shot all-optical helicity independent switching processes are investigated using advanced micromagnetic modeling in a ferrimagnetic thin film embedded in a multilayer stack. Building on recent experimental findings, our multiscale simulations realistically account for heat transport in the stack, focusing on the influence of a metallic copper underlayer with varying thickness. We analyze ho… ▽ More Single-shot all-optical helicity independent switching processes are investigated using advanced micromagnetic modeling in a ferrimagnetic thin film embedded in a multilayer stack. Building on recent experimental findings, our multiscale simulations realistically account for heat transport in the stack, focusing on the influence of a metallic copper underlayer with varying thickness. We analyze how this thermal transport affects the final magnetic state of the ferrimagnet as a function of both the laser pulse duration and fluence. Our results reproduce the experimentally observed switching behaviors and elucidate the physical mechanisms that govern the emergence of three distinct final magnetic states. In particular, we demonstrate how these states are critically influenced by the thickness of the underlying copper layer. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: 13 pages, 4 figures

SpinHex: A low-crosstalk, spin-qubit architecture based on multi-electron couplers

Authors: Rubén M. Otxoa, Josu Etxezarreta Martinez, Paul Schnabl, Normann Mertig, Charles Smith, Frederico Martins

Abstract: Semiconductor spin qubits are an attractive quantum computing platform that offers long qubit coherence times and compatibility with existing semiconductor fabrication technology for scale up. Here, we propose a spin-qubit architecture based on spinless multielectron quantum dots that act as low-crosstalk couplers between a two-dimensional arrangement of spin-qubits in a hexagonal lattice. The mul… ▽ More Semiconductor spin qubits are an attractive quantum computing platform that offers long qubit coherence times and compatibility with existing semiconductor fabrication technology for scale up. Here, we propose a spin-qubit architecture based on spinless multielectron quantum dots that act as low-crosstalk couplers between a two-dimensional arrangement of spin-qubits in a hexagonal lattice. The multielectron couplers are controlled by voltage signals, which mediate fast Heisenberg exchange and thus enable coherent multi-qubit operations. For the proposed architecture, we discuss the implementation of the rotated XZZX surface code and numerically study its performance for a circuit-level noise model. We predict a threshold of $0.18\%$ for the error rate of the entangling gates. We further evaluate the scalability of the proposed architecture and predict the need for $4480$ physical qubits per logical qubit with logical error rates of $10^{-12}$ considering entangling gate fidelities of $99.99\%$, resulting in a chip size of $2.6$cm$^2$ to host $10,000$ logical qubits. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Comments: 14 pages, 8 figures

KTaO3(001) Preparation Methods in Vacuum: Effects on Surface Stoichiometry, Crystallography, and in-gap States

Authors: Andrea M. Lucero Manzano, Esteban D. Cantero, Emanuel A. Martínez, F. Y. Bruno, Esteban A. Sánchez, Oscar Grizzi

Abstract: KTaO3 single crystals with different orientations are used as substrates for the epitaxial growth of thin films and/or as hosts for two-dimensional electron gases. Due to the polar nature of the KTaO3(001) surface, one can expect difficulties and challenges to arise in its preparation. Maintaining good insulating characteristics without adding undesirable in-gap electronic states, obtaining good c… ▽ More KTaO3 single crystals with different orientations are used as substrates for the epitaxial growth of thin films and/or as hosts for two-dimensional electron gases. Due to the polar nature of the KTaO3(001) surface, one can expect difficulties and challenges to arise in its preparation. Maintaining good insulating characteristics without adding undesirable in-gap electronic states, obtaining good crystalline order up to the top surface layer, a sufficiently flat surface, and complete cleanliness of the surface (without water, C or OH contaminants), are in general difficult conditions to accomplish simultaneously. Cleaving in vacuum is likely the best option for obtaining a clean surface. However, since KTaO3 is cubic and lacks a well-defined cleavage plane, this method is notsuitable for sample growth or reproducible device fabrication. Here, we systematically evaluate the effect of typical preparation methods applied on the surfaces of KTaO3(001) single crystals. In particular, we used annealing in vacuum at different temperatures, light sputtering with Ar+ ions at low energy (500 eV) followed by annealing, heavy Ar+ ion bombardment and annealing, and grazing Ar+ ion bombardment under continuous azimuthal rotation combined with both annealing in vacuum and in O2 atmosphere. Possible side effects after each treatment are evaluated by a combination of techniques, including low-energy ion scattering at forward angles, Auger electron spectroscopy, low-energy electron energy loss, X-ray photoelectron spectroscopy, low-energy electron diffraction, and time of flightsecondary ion mass spectrometry. Advantages and shortcomings of each preparation method are discussed in detail. △ Less

Submitted 14 May, 2025; v1 submitted 2 April, 2025; originally announced April 2025.

Comments: 30 pages, 8 figures

Journal ref: J. Vac. Sci. Technol. B 43, 044001 (2025)

Laser Annealing of Transparent ZnO Thin Films: A Route to Improve Electrical Conductivity and Oxygen Sensing Capabilities

Authors: A. Frechilla, J. Frechilla, L. A. Angurel, F. Toldra-Reig, E. Martinez, G. F. de La Fuente, D. Munoz-Rojas

Abstract: The chemical deposition of high-performance Zinc Oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work demonstrates how ultra-short-pulse Laser Beam Scanning (LBS) can be used to modulate electrical conductivity in ZnO thin films deposited on soda-lime glass by Spatia… ▽ More The chemical deposition of high-performance Zinc Oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work demonstrates how ultra-short-pulse Laser Beam Scanning (LBS) can be used to modulate electrical conductivity in ZnO thin films deposited on soda-lime glass by Spatial Atomic Layer Deposition (SALD), a high-throughput, low-temperature deposition technique suitable for large-area applications. By systematically optimizing laser parameters, including pulse energy and hatching distance, significant improvements in the electrical performance of 90 nm-thick ZnO films were achieved. The optimization of the laser annealing parameters, 0.21 uJ/pulse energy and a 1 micron hatching distance, yielded ZnO films with an electrical resistivity of (9 +- 2) 10-2 Ohm cm, 3 orders of magnitude lower than as deposited films. This result suggests that laser post-deposition-processing can play an important role in tailoring the properties of ZnO thin films. Excessive laser intensity can compromise structural integrity of the films, however, degrading their electrical transport properties. Notably, the electrical resistance of laser-annealed ZnO films exhibited high sensitivity to oxygen concentration in the surrounding atmosphere, suggesting exciting prospects for application in devices based on transparent oxygen sensors. This study thus positions ultra-short pulsed laser annealing as a versatile post-deposition method for fine-tuning the properties of ZnO thin films, enabling their use in advanced optoelectronic and gas-sensing technologies, particularly on temperature-sensitive substrates. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Comments: 21 pages of Main Article plus Supplementary Information

Global weak solutions for a variation of the Whitham equation

Authors: Diego Chamorro, María Eugenia Martínez

Abstract: We study in this article a variation of the Whitham equation which was introduced as an alternative to the KdV equation. We first prove the global existence of weak solutions, then we establish a regularity criterion from which we deduce the uniqueness of weak solutions. Local in time criterions for regularity and uniqueness are also given. We study in this article a variation of the Whitham equation which was introduced as an alternative to the KdV equation. We first prove the global existence of weak solutions, then we establish a regularity criterion from which we deduce the uniqueness of weak solutions. Local in time criterions for regularity and uniqueness are also given. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Roadmap to fault tolerant quantum computation using topological qubit arrays

Authors: David Aasen, Morteza Aghaee, Zulfi Alam, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Lukas Avilovas, Amin Barzegar, Bela Bauer, Jonathan Becker, Juan M. Bello-Rivas, Umesh Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Parsa Bonderson, Jan Borovsky, Leo Bourdet, Samuel Boutin, Tom Brown, Gary Campbell, Lucas Casparis, Srivatsa Chakravarthi, Rui Chao , et al. (157 additional authors not shown)

Abstract: We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operati… ▽ More We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation. △ Less

Submitted 7 April, 2025; v1 submitted 17 February, 2025; originally announced February 2025.

Comments: v2: 12+8 pages, 9+5 figures, significant main text revisions, added appendices discussing idle coherence times and non-Clifford operations v1:11+6 pages, 8+5 figures

TuMag: the tunable magnetograph for the Sunrise III mission

Authors: J. C. del Toro Iniesta, D. Orozco Suárez, A. Álvarez-Herrero, E. Sanchis Kilders, I. Pérez-Grande, B. Ruiz Cobo, L. R. Bellot Rubio, M. Balaguer Jiménez, A. C. López Jiménez, D. Álvarez García, J. L. Ramos Más, J. P. Cobos Carrascosa, P. Labrousse, A. J. Moreno Mantas, J. M. Morales-Fernández, B. Aparicio del Moral, A. Sánchez Gómez, E. Bailón Martínez, F. J. Bailén, H. Strecker, A. L. Siu-Tapia, P. Santamarina Guerrero, A. Moreno Vacas, J. Atiénzar García, A. J. Dorantes Monteagudo , et al. (39 additional authors not shown)

Abstract: One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and… ▽ More One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and dynamic coupling in these layers. The key technologies employed for TuMag are an LCVR-based polarimeter and a solid, LiNbO3 Fabry-Pérot etalon as a spectrometer. However, it also incorporates several innovative features, such as home-made high-sensitivity scientific cameras and a double filter wheel. TuMag can sequentially observe any two out of the three spectral lines of Fe I at 525.02 and 525.06 nm and of Mg I at 517.3 nm. Laboratory measurements have demonstrated outstanding performance, including a wavefront root-mean-square error better than λ/13 for image quality, a full-width-at-half-maximum of 8.7 pm for the filtergraph transmission profile, and polarimetric efficiencies > 0.54. Here we report on the concept, design, calibration, and integration phases of the instrument, as well as on the data reduction pipeline. △ Less

Submitted 12 February, 2025; originally announced February 2025.

Comments: Contains 58 pages and 25 figures; to be published in Solar Physics Topical Collection "The Sunrise III Solar Observatory" (https://link.springer.com/collections/jegdciedig)

Markarian 501 reincarnates with vigor as a temporary EHBL during VHE flaring in July 2014

Authors: Sarira Sahu A. U. Puga Oliveros, D. I. Páez-Sánchez, G. Sánchez-Colón, 2 Subhash Rajpoot, M. E. Iglesias Martínez, José Guerra Carmenate, P. Fernández de Córdoba, Gaetano Lambiase

Abstract: Markarian 501, a well known high energy BL Lac object, has exhibited several epochs of very high energy (VHE) gamma-ray flaring events when its synchrotron peak frequency shifted above $10^{17}$ Hz, a signature of extreme behavior. From July 16 to July 31, 2014 such flaring events were observed for 15 days by various telescopes. On July 19 (MJD 56857.98), the X-ray outburst from the source was at… ▽ More Markarian 501, a well known high energy BL Lac object, has exhibited several epochs of very high energy (VHE) gamma-ray flaring events when its synchrotron peak frequency shifted above $10^{17}$ Hz, a signature of extreme behavior. From July 16 to July 31, 2014 such flaring events were observed for 15 days by various telescopes. On July 19 (MJD 56857.98), the X-ray outburst from the source was at its highest and on the same day an intriguing narrow peak-like feature around 3 TeV was observed by MAGIC telescopes, a feature inconsistent with standard interpretations. Using the well known two-zone photohadronic model, we study these VHE gamma-ray spectra on a day-by-day basis and offer explanation. Our two-zone photohadronic scenario shows that, on MJD 56857.98, the peak-like feature appears at a cutoff energy of $E^c_γ$ = 3.18 TeV. Below this energy the observed VHE spectrum increases slowly and above $E^c_γ$ it falls faster, thus resulting in a mild peak-like feature. △ Less

Submitted 11 February, 2025; originally announced February 2025.

Comments: 14 pages, 8 figures, 1 table

Sunrise III: Overview of Observatory and Instruments

Authors: Andreas Korpi-Lagg, Achim Gandorfer, Sami K. Solanki, Jose Carlos del Toro Iniesta, Yukio Katsukawa, Pietro Bernasconi, Thomas Berkefeld, Alex Feller, Tino L. Riethmüller, Alberto Álvarez-Herrero, Masahito Kubo, Valentín Martínez Pillet, H. N. Smitha, David Orozco Suárez, Bianca Grauf, Michael Carpenter, Alexander Bell, María-Teresa Álvarez-Alonso, Daniel Álvarez García, Beatriz Aparicio del Moral, Daniel Ayoub, Francisco Javier Bailén, Eduardo Bailón Martínez, Maria Balaguer Jiménez, Peter Barthol , et al. (95 additional authors not shown)

Abstract: In July 2024, Sunrise completed its third successful science flight. The Sunrise III observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly exp… ▽ More In July 2024, Sunrise completed its third successful science flight. The Sunrise III observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly explored spectral regions and lines are exploited to paint a three-dimensional picture of the solar atmosphere with unprecedented completeness and level of detail. The full polarimetric information is captured by all three instruments to reveal the interaction between the magnetic fields and the hydrodynamic processes. Two slit-based spectropolarimeters, the Sunrise UV Spectropolarimeter and Imager (SUSI) and the Sunrise Chromospheric Infrared spectro-Polarimeter (SCIP), focus on the near-ultraviolet and the near-infrared regions respectively, and the imaging spectropolarimeter Tunable Magnetograph (TuMag) simultaneously obtains maps of the full field-of-view of $46 \times 46$ Mm$^2$ in the photosphere and the chromosphere in the visible. The instruments are operated in an orchestrated mode, benefiting from a new Image Stabilization and Light Distribution unit (ISLiD), with the Correlating Wavefront Sensor (CWS) providing the autofocus control and an image stability with a root-mean-square value smaller than 0.005''. A new gondola was constructed to significantly improve the telescope pointing stability, required to achieve uninterrupted observations over many hours. Sunrise III was launched successfully on July 10, 2024, from the Esrange Space Center near Kiruna (Sweden). It reached the landing site between the Mackenzie River and the Great Bear Lake in Canada after a flight duration of 6.5 days. In this paper, we give an overview of the Sunrise III observatory and its instruments. △ Less

Submitted 30 May, 2025; v1 submitted 10 February, 2025; originally announced February 2025.

Comments: 74 pages, 26 figures. Published as part of the Solar Physics Topical Collection "The Sunrise III Solar Observatory" (https://link.springer.com/collections/jegdciedig)

Journal ref: Sol Phys 300, 75 (2025)

Unconventional resistive switching in dense Ag-based nanowire networks with brain-inspired perspectives

Authors: Juan I. Diaz Schneider, Cynthia P. Quinteros, Eduardo D. Martínez, Pablo E. Levy

Abstract: We report an unconventional resistive switching effect on high-density self-assembled Ag-nanowire networks tailored by a fuse-like operation. We propose a mechanism to rationalize the observed phenomenology by analyzing the electrical signatures before and after such a fusing. The explanation allows reconciling the results obtained in similar systems early adopted as transparent electrodes and the… ▽ More We report an unconventional resistive switching effect on high-density self-assembled Ag-nanowire networks tailored by a fuse-like operation. We propose a mechanism to rationalize the observed phenomenology by analyzing the electrical signatures before and after such a fusing. The explanation allows reconciling the results obtained in similar systems early adopted as transparent electrodes and the more recent attempts to use this type of substrate for in-materia computational operations. In addition to the usual analog nature of the available resistance states and the ability to tune internal weights, we show that these networks' sparsity and non-linear behavior are also attributes. Thus, the formerly exhibited nanowires' abilities to code synaptic behavior are complemented by neuronal features upon properly tuning the network density and the applied electrical protocol. △ Less

Submitted 28 January, 2025; originally announced January 2025.

Analytical dispersion relation for forward volume spin waves in ferrimagnets near the angular momentum compensation condition

Authors: Luis Sánchez-Tejerina, David Osuna Ruiz, Víctor Raposo, Eduardo Martínez, Luis López Díaz, Óscar Alejos

Abstract: Antiferromagnetic magnonics has become the focus of intense scientific research because of the advantages of these materials compared to ferromagnets. However, ferrimagnetic materials have received much less attention despite exhibiting similar dynamical features at the angular momentum compensation point. In this paper, we present analytical expressions describing the dispersion relation of forwa… ▽ More Antiferromagnetic magnonics has become the focus of intense scientific research because of the advantages of these materials compared to ferromagnets. However, ferrimagnetic materials have received much less attention despite exhibiting similar dynamical features at the angular momentum compensation point. In this paper, we present analytical expressions describing the dispersion relation of forward volume spin waves in ferrimagnetic materials near the angular momentum compensation point. Besides, we benchmark the derived dispersion relations with full micromagnetic simulations showing a complete agreement between both approaches. This work predicts two different branches for forward volume spin waves in ferrimagnetic materials merging into a single branch at the angular momentum compensation point. Our results can assist in the design of magnonic devices built on ferrimagnetic materials. △ Less

Submitted 27 January, 2025; originally announced January 2025.

The functional graph of $f(X)=(cX^q+aX)(X^{q}-X)^{n-1}$ over quadratic extensions of finite fields

Authors: Fabio E. Brochero Martínez, Hugo R. Teixeira

Abstract: Let $\mathbb{F}_q$ be the finite field with $q=p^s$ elements, where $p$ is an odd prime and $s$ a positive integer. In this paper, we define the function $f(X)=(cX^q+aX)(X^{q}-X)^{n-1}$, for $a,c\in\mathbb{F}_q$ and $n\geq 1$. We study the dynamics of the function $f(X)$ over the finite field $\mathbb{F}_{q^2}$, determining cycle lengths and number of cycles. We also show that all trees attached t… ▽ More Let $\mathbb{F}_q$ be the finite field with $q=p^s$ elements, where $p$ is an odd prime and $s$ a positive integer. In this paper, we define the function $f(X)=(cX^q+aX)(X^{q}-X)^{n-1}$, for $a,c\in\mathbb{F}_q$ and $n\geq 1$. We study the dynamics of the function $f(X)$ over the finite field $\mathbb{F}_{q^2}$, determining cycle lengths and number of cycles. We also show that all trees attached to cyclic elements are isomorphic, with the exception of the tree hanging from zero. We also present the general shape of such hanging trees, which concludes the complete description of the functional graph of $f(X)$. △ Less

Submitted 16 January, 2025; originally announced January 2025.

Segregation, ordering, and precipitation in refractory alloys

Authors: Jesper Byggmästar, Damian Sobieraj, Jan S. Wróbel, Daniel K. Schreiber, Osman El-Atwani, Enrique Martinez, Duc Nguyen-Manh

Abstract: Tungsten-based low-activation high-entropy alloys are possible candidates for next-generation fusion reactors due to their exceptional tolerance to irradiation, thermal loads, and stress. We develop an accurate and efficient machine-learned interatomic potential for the W-Ta-Cr-V system and use it in hybrid Monte Carlo molecular dynamics simulations of ordering and segregation to all common types… ▽ More Tungsten-based low-activation high-entropy alloys are possible candidates for next-generation fusion reactors due to their exceptional tolerance to irradiation, thermal loads, and stress. We develop an accurate and efficient machine-learned interatomic potential for the W-Ta-Cr-V system and use it in hybrid Monte Carlo molecular dynamics simulations of ordering and segregation to all common types of defects in WTaCrV. The predictions are compared to atom probe tomography analysis of segregation and precipitation in WTaCrV thin films. By also considering two other alloys, WTaV and MoNbTaVW, we are able to draw general conclusions about preferred segregation in refractory alloys and the reasons behind it, guiding future alloy design and elucidating experimental observations. We show that the experimentally observed CrV precipitates in WTaCrV form semicoherent bcc-to-bcc interfaces with the surrounding matrix, as coherent precipitates are not thermodynamically stable due to excessive lattice mismatch. The predictions from simulations align well with our atom probe tomography analysis as well as previous experimental observations. △ Less

Submitted 18 December, 2024; originally announced December 2024.

Design Kinetic Parameters for Improved Resilience of Materials under Irradiation

Authors: Mohammadhossein Nahavandian, Eda Aydogan, Jesper Byggmästar, Matheus A. Tunes, Enrique Martinez, Osman El-Atwani

Abstract: High entropy alloys (HEAs) have captured much attention in recent years due to their conceivably improved radiation resistance compared to pure metals and traditional alloys. However, among HEAs, there are millions of design possibilities considering all potential compositions. In this study, we develop criteria to design HEAs with improved radiation resilience taking into consideration defect pro… ▽ More High entropy alloys (HEAs) have captured much attention in recent years due to their conceivably improved radiation resistance compared to pure metals and traditional alloys. However, among HEAs, there are millions of design possibilities considering all potential compositions. In this study, we develop criteria to design HEAs with improved radiation resilience taking into consideration defect properties to promote interstitial-vacancy recombination. First, we conduct rate theory calculations on defects followed by molecular dynamics (MD) simulations on pure W and W-based multicomponent concentrated alloys. It is found that when the diffusion coefficients for single vacancies and interstitials become similar and the effective migration energies of defects is minimum (maximum diffusivities), defect recombination becomes optimal, and the concentration of defects is significantly reduced. This is supported by MD simulations indicating improved radiation resistance of V- and Cr-based alloys, which satisfy the above-stated criteria. Furthermore, experimental observations also reinforce the proposed approach. This study sheds light on the design criteria for improved radiation resistance and helps material selection without the need of extensive experimental work. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Asymptotically good CSS-T codes exist

Authors: Elena Berardini, Reza Dastbasteh, Josu Etxezarreta Martinez, Shreyas Jain, Olatz Sanz Larrarte

Abstract: We give a new construction of binary quantum codes that enables the generation of a CSS-T code from any given CSS code. Using this construction, we prove the existence of asymptotically good binary CSS-T codes, resolving a previously open problem in the literature. Furthermore, we demonstrate that the same result holds for binary quantum low-density parity check CSS-T codes, and establish the exis… ▽ More We give a new construction of binary quantum codes that enables the generation of a CSS-T code from any given CSS code. Using this construction, we prove the existence of asymptotically good binary CSS-T codes, resolving a previously open problem in the literature. Furthermore, we demonstrate that the same result holds for binary quantum low-density parity check CSS-T codes, and establish the existence of asymptotically good CSS codes that support any given $Z$ rotation transversally. Finally, we analyze the structure of the logical operators corresponding to certain non-Clifford gates supported by the quantum codes obtained from our construction. △ Less

Submitted 11 December, 2024; originally announced December 2024.

Impact of leakage to the dynamic of a ST$_0$ qubit implemented on a Double Quantum Dot device

Authors: Javier Oliva del Moral, Olatz Sanz Larrarte, Reza Dastbasteh, Josu Etxezarreta Martinez, Rubén M. Otxoa

Abstract: Spin qubits in quantum dots are a promising technology for quantum computing due to their fast response time and long coherence times. An electromagnetic pulse is applied to the system for a specific duration to perform a desired rotation. To avoid decoherence, the amplitude and gate time must be highly accurate. In this work, we aim to study the impact of leakage during the gate time evolution of… ▽ More Spin qubits in quantum dots are a promising technology for quantum computing due to their fast response time and long coherence times. An electromagnetic pulse is applied to the system for a specific duration to perform a desired rotation. To avoid decoherence, the amplitude and gate time must be highly accurate. In this work, we aim to study the impact of leakage during the gate time evolution of a spin qubit encoded in a double quantum dot device. We prove that, in the weak interaction regime, leakage introduces a shift in the phase of the time evolution operator, causing over- or under-rotations. Indeed, controlling the leakage terms is useful for adjusting the time needed to perform a quantum computation. This is crucial for running fault-tolerant algorithms and is beneficial for Quantum Error Mitigation techniques. △ Less

Submitted 28 November, 2024; originally announced November 2024.

Comments: 13 pages, 6 figures

Modeling and dynamics near irregular elongated asteroids

Authors: E. Martínez, J. Vidarte, J. L. Zapata

Abstract: We investigate the qualitative characteristics of a test particle attracted to an irregular elongated body, modeled as a non-homogeneous straight segment with a variable linear density. By deriving the potential function in closed form, we formulate the Hamiltonian equations of motion for this system. Our analysis reveals a family of periodic circular orbits parameterized by angular momentum. Addi… ▽ More We investigate the qualitative characteristics of a test particle attracted to an irregular elongated body, modeled as a non-homogeneous straight segment with a variable linear density. By deriving the potential function in closed form, we formulate the Hamiltonian equations of motion for this system. Our analysis reveals a family of periodic circular orbits parameterized by angular momentum. Additionally, we utilize the axial symmetry resulting from rotations around the segment's axis to consider the corresponding reduced system. This approach identifies several reduced-periodic orbits by analyzing appropriate Poincaré sections. These periodic orbits are then reconstructed into quasi-periodic orbits within the full dynamical system. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Control of spin-orbit torque-driven domain nucleation through geometry in chirally coupled magnetic tracks

Authors: Guillaume Beaulieu, Zhaochu Luo, Víctor Raposo, Laura J. Heyderman, Pietro Gambardella, Eduardo Martínez, Aleš Hrabec

Abstract: The interfacial Dzyaloshinskii-Moriya interaction (DMI) can be exploited in magnetic thin films to realize lateral chirally coupled systems, providing a way to couple different sections of a magnetic racetrack and realize interconnected networks of magnetic logic gates. Here, we systematically investigate the interplay between spin-orbit torques, chiral coupling and the device design in domain wal… ▽ More The interfacial Dzyaloshinskii-Moriya interaction (DMI) can be exploited in magnetic thin films to realize lateral chirally coupled systems, providing a way to couple different sections of a magnetic racetrack and realize interconnected networks of magnetic logic gates. Here, we systematically investigate the interplay between spin-orbit torques, chiral coupling and the device design in domain wall racetracks. We show that the current-induced domain nucleation process can be tuned between single-domain nucleation and repeated nucleation of alternate domains by changing the orientation of an in-plane patterned magnetic region within an out-of-plane magnetic racetrack. Furthermore, by combining experiments and micromagnetic simulations, we show that the combination of damping-like and field-like spin-orbit torques with DMI results in selective domain wall injection in one of two arms of a Y-shaped devices depending on the current density. Such an element constitutes the basis of domain wall based demultiplexer, which is essential for distributing a single input to any one of the multiple outputs in logic circuits. Our results provide input for the design of reliable and multifunctional domain-wall circuits based on chirally coupled interfaces. △ Less

Submitted 30 September, 2024; originally announced October 2024.

High stability 2D electron gases formed in Si3N4/Al//KTaO3 heterostructures: synthesis and in-depth interfacial characterization

Authors: E. A. Martínez, A. M. Lucero, E. D. Cantero, N. Biškup, A. Orte, E. A. Sánchez, M. Romera, N. M. Nemes, J. L. Martínez, M. Varela, O. Grizzi, F. Y. Bruno

Abstract: The two-dimensional electron gas (2DEG) found in KTaO3-based interfaces has garnered attention due to its remarkable electronic properties. In this study, we investigated the conducting system embedded at the Si3N4/Al//KTO(110) heterostructure. We demonstrate that the Al/KTO interface supports a conducting system, with the Si3N4 passivation layer acting as a barrier to oxygen diffusion, enabling e… ▽ More The two-dimensional electron gas (2DEG) found in KTaO3-based interfaces has garnered attention due to its remarkable electronic properties. In this study, we investigated the conducting system embedded at the Si3N4/Al//KTO(110) heterostructure. We demonstrate that the Al/KTO interface supports a conducting system, with the Si3N4 passivation layer acting as a barrier to oxygen diffusion, enabling ex-situ characterization. Our findings reveal that the mobility and carrier density of the system can be tuned by varying the Al layer thickness. Using scanning transmission electron microscopy, electron energy-loss spectroscopy, X-ray photoemission spectroscopy, and time-of-flight secondary ion mass spectrometry, we characterized the structural and chemical composition of the interface. We found that the Al layer fully oxidizes into AlOx, drawing oxygen from the KTaO3 substrate. The oxygen depletion zone extends 3-5 nm into the substrate and correlates to the Al thickness. Heterostructures with thicker Al layers exhibit higher carrier densities but lower mobilities, likely due to interactions with the oxygen vacancies that act as scattering centers. These findings highlight the importance of considering the effect and extent of the oxygen depletion zone when designing and modeling two-dimensional electron systems in complex oxides. △ Less

Submitted 18 September, 2024; originally announced September 2024.

Journal ref: Applied Surface Science, 689, 162499 (2025)

Hacking Cryptographic Protocols with Tensor Network Attacks

Authors: Borja Aizpurua, Siddhartha Patra, Josu Etxezarreta Martinez, Roman Orus

Abstract: Here we introduce the application of Tensor Networks (TN) to launch attacks on symmetric-key cryptography. Our approaches make use of Matrix Product States (MPS) as well as our recently-introduced Flexible-PEPS Quantum Circuit Simulator (FQCS). We compare these approaches with traditional brute-force attacks and Variational Quantum Attack Algorithm (VQAA) methods also proposed by us. Our benchmark… ▽ More Here we introduce the application of Tensor Networks (TN) to launch attacks on symmetric-key cryptography. Our approaches make use of Matrix Product States (MPS) as well as our recently-introduced Flexible-PEPS Quantum Circuit Simulator (FQCS). We compare these approaches with traditional brute-force attacks and Variational Quantum Attack Algorithm (VQAA) methods also proposed by us. Our benchmarks include the Simplified Data Encryption Standard (S-DES) with 10-bit keys, Simplified Advanced Encryption Standard (S-AES) with 16-bit keys, and Blowfish with 32-bit keys. We find that for small key size, MPS outperforms VQAA and FQCS in both time and average iterations required to recover the key. As key size increases, FQCS becomes more efficient in terms of average iterations compared to VQAA and MPS, while MPS remains the fastest in terms of time. These results highlight the potential of TN methods in advancing quantum cryptanalysis, particularly in optimizing both speed and efficiency. Our results also show that entanglement becomes crucial as key size increases. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Comments: 10 pages, 8 figures

An almost-linear time decoding algorithm for quantum LDPC codes under circuit-level noise

Authors: Antonio deMarti iOlius, Imanol Etxezarreta Martinez, Joschka Roffe, Josu Etxezarreta Martinez

Abstract: Fault-tolerant quantum computers must be designed in conjunction with classical co-processors that decode quantum error correction measurement information in real-time. In this work, we introduce the belief propagation plus ordered Tanner forest (BP+OTF) algorithm as an almost-linear time decoder for quantum low-density parity-check codes. The OTF post-processing stage removes qubits from the deco… ▽ More Fault-tolerant quantum computers must be designed in conjunction with classical co-processors that decode quantum error correction measurement information in real-time. In this work, we introduce the belief propagation plus ordered Tanner forest (BP+OTF) algorithm as an almost-linear time decoder for quantum low-density parity-check codes. The OTF post-processing stage removes qubits from the decoding graph until it has a tree-like structure. Provided that the resultant loop-free OTF graph supports a subset of qubits that can generate the syndrome, BP decoding is then guaranteed to converge. To enhance performance under circuit-level noise, we introduce a technique for sparsifying detector error models. This method uses a transfer matrix to map soft information from the full detector graph to the sparsified graph, preserving critical error propagation information from the syndrome extraction circuit. Our BP+OTF implementation first applies standard BP to the full detector graph, followed by BP+OTF post-processing on the sparsified graph. Numerical simulations show that the BP+OTF decoder achieves logical error suppression within an order of magnitude of state-of-the-art inversion-based decoders while maintaining almost-linear runtime complexity across all stages. △ Less

Submitted 2 September, 2024; originally announced September 2024.

Comments: 13 pages, 3 figures

Two-junction model in different percolation regimes of silver nanowires networks

Authors: J. I. Diaz Schneider, C. P. Quinteros, P. E. Levy, E. D. Martínez

Abstract: Random networks offer fertile ground for achieving complexity and criticality, both crucial for an unconventional computing paradigm inspired by biological brains' features. In this work, we focus on characterizing and modeling different electrical transport regimes of self-assemblies of silver nanowires (AgNWs). As percolation plays an essential role in such a scenario, we explore a broad range o… ▽ More Random networks offer fertile ground for achieving complexity and criticality, both crucial for an unconventional computing paradigm inspired by biological brains' features. In this work, we focus on characterizing and modeling different electrical transport regimes of self-assemblies of silver nanowires (AgNWs). As percolation plays an essential role in such a scenario, we explore a broad range of areal density coverage. Close-to-percolation realizations (usually used to demonstrate neuromorphic computing capabilities) have large pristine resistance and require an electrical activation. Up to now, highly conductive over-percolated systems (commonly used in electrode fabrication technology) have not been thoroughly considered for hardware-based neuromorphic applications, though biological systems exhibit such an extremely high degree of interconnections. Here, we show that high current densities in over-percolated low-resistance AgNW networks induce a fuse-type process, allowing a switching operation. Such electro-fusing discriminates between weak and robust NW-to-NW links and enhances the role of filamentary junctions. Their reversible resistive switching enable different conductive paths exhibiting linear I-V features. We experimentally study both percolation regimes and propose a model comprising two types of junctions that can describe, through numerical simulations, the overall behavior and observed phenomenology. These findings unveil a potential interplay of functionalities of neuromorphic systems and transparent electrodes. △ Less

Submitted 2 September, 2024; originally announced September 2024.

Journal ref: Adv. Funct. Mater. 2024, 34, 2410766

Indoor scene recognition from images under visual corruptions

Authors: Willams de Lima Costa, Raul Ismayilov, Nicola Strisciuglio, Estefania Talavera Martinez

Abstract: The classification of indoor scenes is a critical component in various applications, such as intelligent robotics for assistive living. While deep learning has significantly advanced this field, models often suffer from reduced performance due to image corruption. This paper presents an innovative approach to indoor scene recognition that leverages multimodal data fusion, integrating caption-based… ▽ More The classification of indoor scenes is a critical component in various applications, such as intelligent robotics for assistive living. While deep learning has significantly advanced this field, models often suffer from reduced performance due to image corruption. This paper presents an innovative approach to indoor scene recognition that leverages multimodal data fusion, integrating caption-based semantic features with visual data to enhance both accuracy and robustness against corruption. We examine two multimodal networks that synergize visual features from CNN models with semantic captions via a Graph Convolutional Network (GCN). Our study shows that this fusion markedly improves model performance, with notable gains in Top-1 accuracy when evaluated against a corrupted subset of the Places365 dataset. Moreover, while standalone visual models displayed high accuracy on uncorrupted images, their performance deteriorated significantly with increased corruption severity. Conversely, the multimodal models demonstrated improved accuracy in clean conditions and substantial robustness to a range of image corruptions. These results highlight the efficacy of incorporating high-level contextual information through captions, suggesting a promising direction for enhancing the resilience of classification systems. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Slowly Rotating Boson Stars

Authors: Jorge F. M. Delgado, Juan Carlos Degollado, Luis E. Martínez, Marcelo Salgado

Abstract: We present solutions to the Einstein-Klein Gordon system representing boson stars in the slow rotation approximation. By considering slow rotation we are able to reduce the number of equations yielding a system of ordinary differential equations that is conveniently solved numerically without the need of expensive computational resources. We find sequences of solutions and describe some of their p… ▽ More We present solutions to the Einstein-Klein Gordon system representing boson stars in the slow rotation approximation. By considering slow rotation we are able to reduce the number of equations yielding a system of ordinary differential equations that is conveniently solved numerically without the need of expensive computational resources. We find sequences of solutions and describe some of their physical properties such as, total mass, angular momentum and compactness. We also consider the dynamics of particles (geodesics) in the resulting spacetime. A detailed comparison with fully rotating boson stars (non-linear treatment) is performed by showing the region of validity of the slow-rotation approximation. △ Less

Submitted 9 August, 2024; originally announced August 2024.

Comments: 21 pages, 12 figures

Low-weight codewords in cyclic codes

Authors: José G. Coelho, F. E. Brochero Martínez

Abstract: We introduce a formula for determining the number of codewords of weight 2 in cyclic codes and provide results related to the count of codewords with weight 3. Additionally, we establish a recursive relationship for binary cyclic codes that connects their weight distribution to the number of solutions of associated systems of polynomial equations. This relationship allows for the computation of we… ▽ More We introduce a formula for determining the number of codewords of weight 2 in cyclic codes and provide results related to the count of codewords with weight 3. Additionally, we establish a recursive relationship for binary cyclic codes that connects their weight distribution to the number of solutions of associated systems of polynomial equations. This relationship allows for the computation of weight distributions from known solutions of systems of diagonal equations and vice versa, offering a new insight into the structure and properties of binary cyclic codes. △ Less

Submitted 30 May, 2025; v1 submitted 25 July, 2024; originally announced July 2024.

Deep-TEMPEST: Using Deep Learning to Eavesdrop on HDMI from its Unintended Electromagnetic Emanations

Authors: Santiago Fernández, Emilio Martínez, Gabriel Varela, Pablo Musé, Federico Larroca

Abstract: In this work, we address the problem of eavesdropping on digital video displays by analyzing the electromagnetic waves that unintentionally emanate from the cables and connectors, particularly HDMI. This problem is known as TEMPEST. Compared to the analog case (VGA), the digital case is harder due to a 10-bit encoding that results in a much larger bandwidth and non-linear mapping between the obser… ▽ More In this work, we address the problem of eavesdropping on digital video displays by analyzing the electromagnetic waves that unintentionally emanate from the cables and connectors, particularly HDMI. This problem is known as TEMPEST. Compared to the analog case (VGA), the digital case is harder due to a 10-bit encoding that results in a much larger bandwidth and non-linear mapping between the observed signal and the pixel's intensity. As a result, eavesdropping systems designed for the analog case obtain unclear and difficult-to-read images when applied to digital video. The proposed solution is to recast the problem as an inverse problem and train a deep learning module to map the observed electromagnetic signal back to the displayed image. However, this approach still requires a detailed mathematical analysis of the signal, firstly to determine the frequency at which to tune but also to produce training samples without actually needing a real TEMPEST setup. This saves time and avoids the need to obtain these samples, especially if several configurations are being considered. Our focus is on improving the average Character Error Rate in text, and our system improves this rate by over 60 percentage points compared to previous available implementations. The proposed system is based on widely available Software Defined Radio and is fully open-source, seamlessly integrated into the popular GNU Radio framework. We also share the dataset we generated for training, which comprises both simulated and over 1000 real captures. Finally, we discuss some countermeasures to minimize the potential risk of being eavesdropped by systems designed based on similar principles. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Comments: Submitted to LADC '24

Quantum CSS Duadic and Triadic Codes: New Insights and Properties

Authors: Reza Dastbasteh, Olatz Sanz Larrarte, Josu Etxezarreta Martinez, Antonio deMarti iOlius, Javier Oliva del Moral, Pedro Crespo Bofill

Abstract: In this study, we investigate the construction of quantum CSS duadic codes with dimensions greater than one. We introduce a method for extending smaller splittings of quantum duadic codes to create larger, potentially degenerate quantum duadic codes. Furthermore, we present a technique for computing or bounding the minimum distances of quantum codes constructed through this approach. Additionally,… ▽ More In this study, we investigate the construction of quantum CSS duadic codes with dimensions greater than one. We introduce a method for extending smaller splittings of quantum duadic codes to create larger, potentially degenerate quantum duadic codes. Furthermore, we present a technique for computing or bounding the minimum distances of quantum codes constructed through this approach. Additionally, we introduce quantum CSS triadic codes, a family of quantum codes with a rate of at least $\frac{1}{3}$. △ Less

Submitted 10 July, 2024; originally announced July 2024.

MSC Class: 94B05; 94B15

Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry

Authors: M. A. Tunes, D. Parkison, B. Sun, P. Willenshofer, S. Samberger, B. K. Derby, J. K. S. Baldwin, S. J. Fensin, D. Sobieraj, J. S. Wróbel, J. Byggmästar, S. Pogatscher, E. Martinez, D. Nguyen-Manh, O. El-Atwani

Abstract: Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii)… ▽ More Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity. △ Less

Submitted 21 June, 2024; originally announced June 2024.

ST-Gait++: Leveraging spatio-temporal convolutions for gait-based emotion recognition on videos

Authors: Maria Luísa Lima, Willams de Lima Costa, Estefania Talavera Martinez, Veronica Teichrieb

Abstract: Emotion recognition is relevant for human behaviour understanding, where facial expression and speech recognition have been widely explored by the computer vision community. Literature in the field of behavioural psychology indicates that gait, described as the way a person walks, is an additional indicator of emotions. In this work, we propose a deep framework for emotion recognition through the… ▽ More Emotion recognition is relevant for human behaviour understanding, where facial expression and speech recognition have been widely explored by the computer vision community. Literature in the field of behavioural psychology indicates that gait, described as the way a person walks, is an additional indicator of emotions. In this work, we propose a deep framework for emotion recognition through the analysis of gait. More specifically, our model is composed of a sequence of spatial-temporal Graph Convolutional Networks that produce a robust skeleton-based representation for the task of emotion classification. We evaluate our proposed framework on the E-Gait dataset, composed of a total of 2177 samples. The results obtained represent an improvement of approximately 5% in accuracy compared to the state of the art. In addition, during training we observed a faster convergence of our model compared to the state-of-the-art methodologies. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Accepted for publication in the LXCV Workshop @ CVPR 2024

Comment on "Recovering noise-free quantum observables"

Authors: Josu Etxezarreta Martinez, Olatz Sanz Larrarte, Javier Oliva del Moral, Reza Dastbasteh, Ruben M. Otxoa

Abstract: Zero-noise extrapolation (ZNE) stands as the most widespread quantum error mitigation technique in order to aim the recovery of noise-free expectation values of observables of interest by means of Noisy Intermediate-Scale Quantum (NISQ) machines. Recently, Otten and Gray proposed a multidimensional generalization of polynomial ZNE for systems where there is not a tunable global noise source [Phys.… ▽ More Zero-noise extrapolation (ZNE) stands as the most widespread quantum error mitigation technique in order to aim the recovery of noise-free expectation values of observables of interest by means of Noisy Intermediate-Scale Quantum (NISQ) machines. Recently, Otten and Gray proposed a multidimensional generalization of polynomial ZNE for systems where there is not a tunable global noise source [Phys. Rev. A \textbf{99,} 012338 (2019)]. Specifically, the authors refer to multiqubit systems where each of the qubits experiences several noise processes with different rates, i.e. a non-identically distributed noise model. The authors proposed a hypersurface method for mitigating such noise, which is technically correct. While effective, the proposed method presents an unbearable experiment repetition overhead, making it impractical, at least from the perspective of quantum computing. In this comment, we show that the traditional extrapolation techniques can be applied for such non-identically distributed noise setting consisted of many different noise sources, implying that the measurement overhead is reduced considerably. For doing so, we clarify what it is meant by a tunable global noise source in the context of ZNE, concept that we consider important to be clarified for a correct understanding about how and why these methods work. △ Less

Submitted 26 August, 2024; v1 submitted 26 March, 2024; originally announced May 2024.

Comments: 5 pages, 1 figure; comment on arXiv:1806.07860

Melnikov Method for Perturbed Completely Integrable Systems

Authors: F. Crespo, M. Uribe, E. Martínez

Abstract: We consider a completely integrable system of differential equations in arbitrary dimensions whose phase space contains an open set foliated by periodic orbits. This research analyzes the persistence and stability of the periodic orbits under a nonlinear periodic perturbation. For this purpose, we use the Melnikov method and Floquet theory to establish conditions for the existence and stability of… ▽ More We consider a completely integrable system of differential equations in arbitrary dimensions whose phase space contains an open set foliated by periodic orbits. This research analyzes the persistence and stability of the periodic orbits under a nonlinear periodic perturbation. For this purpose, we use the Melnikov method and Floquet theory to establish conditions for the existence and stability of periodic orbits. Our approach considers periods of the unperturbed orbits depending on the integrals and constant periods. In the applications, we deal with both cases. Precisely, we study the existence of periodic orbits in a perturbed generalized Euler system. In the degenerate case, we analyze the existence and stability of periodic orbits for a perturbed harmonic oscillator. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Authors: Osman El-Atwani, Annie K. Barnett, Enrique Martinez, Jian Han, Asher C. Leff, Chang-Yu Hung, James E. Nathaniel, Sicong He, Emily H. Mang, Larissa M. Woryk, Khalid Hattar, Blas P. Uberuaga, David J. Srolovitz, Michael L. Falk, Jaime Marian, Mitra L. Taheri

Abstract: Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibr… ▽ More Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Data-Driven Modeling of Dislocation Mobility from Atomistics using Physics-Informed Machine Learning

Authors: Yifeng Tian, Soumendu Bagchi, Liam Myhill, Giacomo Po, Enrique Martinez, Yen Ting Lin, Nithin Mathew, Danny Perez

Abstract: Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulatio… ▽ More Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulations under varying conditions of temperature and stress. This tedious and time-consuming approach becomes particularly cumbersome for materials with complex dependencies on stress, temperature, and local environment, such as body-centered cubic crystals (BCC) metals and alloys. In this paper, we present a novel, uncertainty quantification-driven active learning paradigm for learning dislocation mobility laws from automated high-throughput large-scale molecular dynamics simulations, using Graph Neural Networks (GNN) with a physics-informed architecture. We demonstrate that this Physics-informed Graph Neural Network (PI-GNN) framework captures the underlying physics more accurately compared to existing phenomenological mobility laws in BCC metals. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Interlayer Dzyaloshinskii-Moriya interaction in synthetic ferrimagnets

Authors: Shen Li, Mouad Fattouhi, Tianxun Huang, Chen Lv, Mark C. H. de Jong, Pingzhi Li, Xiaoyang Lin, Felipe Garcia-Sanchez, Eduardo Martinez, Stéphane Mangin, Bert Koopmans, Weisheng Zhao, Reinoud Lavrijsen

Abstract: The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been… ▽ More The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been uncovered. Here, we exploit interlayer chiral exchange bias fields in SFi to address both the sign and magnitude of the IL-DMI. Depending on the degree of imbalance between the two magnetic moments of the SFi, the amount of asymmetry, addressed via loop shifts of the hysteresis loops under an in-plane field reveals a unidirectional and chiral nature of the IL-DMI. The devices are then tested with SOT switching experiments and the process is examined via both transient state and steady state detection. In addition to field-free SOT switching, we find that the combination of IL-DMI and SOT give rise to multi-resistance states, which provides a possible direction for the future design of neuromorphic computing devices based on SOT. This work is a step towards characterizing and understanding the IL-DMI for spintronic applications. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: no

MSC Class: no

Stochastic Integration of the Cahn-Hilliard Phase Field Equations

Authors: Qianran Yu, Nicholas Julian, Jaime Marian, Enrique Martinez

Abstract: In this work we develop a stochastic algorithm to integrate the Cahn-Hilliard equations. The algorithm is based on Gillespie's stochastic simulation algorithm, also known as kinetic Monte Carlo. The deterministic integration of the phase field equations leads to the closest minimum of free energy and does not overcome free energy barriers. However, in the nucleation and growth regime of the phase… ▽ More In this work we develop a stochastic algorithm to integrate the Cahn-Hilliard equations. The algorithm is based on Gillespie's stochastic simulation algorithm, also known as kinetic Monte Carlo. The deterministic integration of the phase field equations leads to the closest minimum of free energy and does not overcome free energy barriers. However, in the nucleation and growth regime of the phase diagram, free energy barriers need to be thermally overcome for the system to phase separate to reach equilibrium. We show in this work that the proposed stochastic integration algorithm indeed allows the system to overcome free energy barriers. We discuss the results in terms of fluctuation distributions, grid sizes and efficiency. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Prediction of defect properties in concentrated solid solutions using a Langmuir-like model

Authors: Jacob Jeffries, Fadi Abdeljawad, Suveen Mathaudhu, Emmanuelle Marquis, Enrique Martinez

Abstract: The alleged existence of sluggish diffusion in high entropy alloys has drawn controversy. In high entropy alloys, and in general in all solids, transport properties are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for defect concentration in an arbitrar… ▽ More The alleged existence of sluggish diffusion in high entropy alloys has drawn controversy. In high entropy alloys, and in general in all solids, transport properties are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for defect concentration in an arbitrarily complex solid solution and apply this model to generate expressions for concentrations of vacancies and small interstitial atoms. We then calculate the vacancy concentration as a function of temperature in the equiatomic CoNiCrFeMn and FeAl alloys with modified embedded-atom-method potentials for various chemical orderings, showing there is no clear correlation between vacancy thermodynamics and chemical ordering in the CoNiCrFeMn alloy but clear systematic patterns for FeAl. We believe this is due to the high stability of disordered, random and ordered, intermetallic phases respectively in the CoNiCrFeMn and FeAl systems. This work provides future avenues to the prediction of thermal interstitials and vacancies in solid solutions, which is necessary for models of non-equilibrium behavior of solid solutions. △ Less

Submitted 4 April, 2025; v1 submitted 11 February, 2024; originally announced February 2024.

Comments: 13 pages, 6 figures

Journal ref: Phys. Rev. Materials 9, 033803 (2025)

The closed-branch decoder for quantum LDPC codes

Authors: Antonio deMarti iOlius, Josu Etxezarreta Martinez

Abstract: Quantum error correction is the building block for constructing fault-tolerant quantum processors that can operate reliably even if its constituting elements are corrupted by decoherence. In this context, real-time decoding is a necessity for implementing arbitrary quantum computations on the logical level. In this work, we present a new decoder for Quantum Low Density Parity Check (QLDPC) codes,… ▽ More Quantum error correction is the building block for constructing fault-tolerant quantum processors that can operate reliably even if its constituting elements are corrupted by decoherence. In this context, real-time decoding is a necessity for implementing arbitrary quantum computations on the logical level. In this work, we present a new decoder for Quantum Low Density Parity Check (QLDPC) codes, named the closed-branch decoder, with a worst-case complexity loosely upper bounded by $\mathcal{O}(n\text{max}_{\text{gr}}\text{max}_{\text{br}})$, where $\text{max}_{\text{gr}}$ and $\text{max}_{\text{br}}$ are tunable parameters that pose the accuracy versus speed trade-off of decoding algorithms. For the best precision, the $\text{max}_{\text{gr}}\text{max}_{\text{br}}$ product increases exponentially as $\propto dj^d$, where $d$ indicates the distance of the code and $j$ indicates the average row weight of its parity check matrix. Nevertheless, we numerically show that considering small values that are polynomials of the code distance are enough for good error correction performance. The decoder is described to great extent and compared with the Belief Propagation Ordered Statistics Decoder (BPOSD) operating over data qubit, phenomenological and circuit-level noise models for the class of Bivariate Bicycle (BB) codes. The results showcase a promising performance of the decoder, obtaining similar results with much lower complexity than BPOSD when considering the smallest distance codes, but experiencing some logical error probability degradation for the larger ones. Ultimately, the performance and complexity of the decoder depends on the product $\text{max}_{\text{gr}}\text{max}_{\text{br}}$, which can be considered taking into account benefiting one of the two aspects at the expense of the other. △ Less

Submitted 14 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 16 pages, 11 figures

Current-Driven Domain Wall Motion in Curved Ferrimagnetic Strips Above and Below the Angular Momentum Compensation

Authors: David Osuna Ruiz, Óscar Alejos, Víctor Raposo, Eduardo Martínez

Abstract: Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show tha… ▽ More Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show that domain walls can propagate faster and without a significant distortion in such strips in contrast to their ferromagnetic counterparts. Using an artificial system based on a straight strip with an equivalent current density distribution, we can discern its influence on the wall terminal velocity, as part of a more general geometrical influence due to the curved shape. Curved and narrow ferrimagnetic strips are promising candidates for designing high speed and fast response spintronic circuitry based on current-driven domain wall motion. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Journal ref: Front. Phys. 9:772264 (2021)

Geometrical design for pure current-driven domain wall nucleation and shifting

Authors: David Osuna Ruiz, Óscar Alejos, Víctor Raposo, Eduardo Martínez

Abstract: Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecon… ▽ More Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecond-duration current pulses nucleate and drive series of robust up/down domains even under realistic conditions. These results demonstrate a technique for sequentially nucleating and shifting domain walls without using attached external bit lines, fields or modifying the ferromagnetic strip. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 11 pages, 3 figures

Journal ref: Appl. Phys. Lett. 121, 102403 (2022)

Environmental impacts, nutritional profiles, and retail prices of commonly sold retail food items in 181 countries: an observational study

Authors: Elena M. Martinez, Nicole Tichenor Blackstone, Parke E. Wilde, Anna W. Herforth, William A. Masters

Abstract: Affordability is often seen as a barrier to consuming sustainable diets. This study provides the first worldwide test of how retail food prices relate to empirically estimated environmental impacts and nutritional profile scores between and within food groups. We use prices for 811 retail food items commonly sold in 181 countries during 2011 and 2017, matched to estimated carbon and water footprin… ▽ More Affordability is often seen as a barrier to consuming sustainable diets. This study provides the first worldwide test of how retail food prices relate to empirically estimated environmental impacts and nutritional profile scores between and within food groups. We use prices for 811 retail food items commonly sold in 181 countries during 2011 and 2017, matched to estimated carbon and water footprints and nutritional profiles, to test whether healthier and more environmentally sustainable foods are more expensive between and within food groups. We find that within almost all groups, less expensive items have significantly lower carbon and water footprints. Associations are strongest for animal source foods, where each 10% lower price is associated with 20 grams lower CO2-equivalent carbon and 5 liters lower water footprint per 100kcal. Gradients between price and nutritional profile vary by food group, price range, and nutritional attribute. In contrast, lower-priced items have lower nutritional value in only some groups over some price ranges, and that relationship is sometimes reversed. These findings reveal opportunities to reduce financial and environmental costs of diets, contributing to transitions towards healthier, more environmentally sustainable food systems. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

Authors: Morteza Aghaee, Alejandro Alcaraz Ramirez, Zulfi Alam, Rizwan Ali, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Arnaud Bousquet, Samuel Boutin, Lucas Casparis, Benjamin James Chapman, Sohail Chatoor, Anna Wulff Christensen, Cassandra Chua, Patrick Codd, William Cole , et al. (137 additional authors not shown)

Abstract: The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct… ▽ More The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%. △ Less

Submitted 2 April, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Comments: Added data on a second measurement of device A and a measurement of device B, expanded discussion of a trivial scenario. Refs added, author list updated

Spin Waves in Ferrimagnets near the Angular Magnetization Compensation Temperature: A Micromagnetic Study

Authors: Luis Sánchez-Tejerina, David Osuna Ruiz, Eduardo Martínez, Luis López Díaz, Óscar Alejos

Abstract: Spin wave propagation along a ferrimagnetic strip with out-of-plane magnetization is studied by means of micromagnetic simulations. The ferrimagnetic material is considered as formed by two antiferromagnetically coupled sublattices. Two critical temperatures can be defined for such systems: that of magnetization compensation and that of angular momentum compensation, both different due to distinct… ▽ More Spin wave propagation along a ferrimagnetic strip with out-of-plane magnetization is studied by means of micromagnetic simulations. The ferrimagnetic material is considered as formed by two antiferromagnetically coupled sublattices. Two critical temperatures can be defined for such systems: that of magnetization compensation and that of angular momentum compensation, both different due to distinct Landé factors for each sub-lattice. Spin waves in the strip are excited by a spin current injected at one of its edges. The obtained dispersion diagrams show exchange-dominated forward volume spin waves. For a given excitation frequency, Néel vector describes highly eccentric orbits, the eccentricity depending on temperature, whose semi-major axis are oriented differently at distinct locations on the FiM strip. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 10 pages, 4 figures, presented at JEMS 2023

From anti-Arrhenius to Arrhenius behavior in a dislocation-obstacle bypass: Atomistic Simulations and Theoretical Investigation

Authors: Mohammadhossein Nahavandian, Soumit Sarkar, Soumendu Bagchi, Danny Perez, Enrique Martinez

Abstract: Dislocations are the primary carriers of plasticity in metallic material. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate for an edge dislocation to overcome the elastic interaction with a prismatic loop in tungsten.… ▽ More Dislocations are the primary carriers of plasticity in metallic material. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate for an edge dislocation to overcome the elastic interaction with a prismatic loop in tungsten. Beyond the critical resolved shear stress, the process shows a non-Arrhenius behavior at low temperatures. However, as the temperature increases, the activation entropy starts to dominate, leading to a traditional Arrhenius behavior. We have computed the activation entropy analytically along the minimum energy path following Schoeck's methods [1], which capture the cross-over between anti-Arrhenius and Arrhenius domains. Also, the Projected Average Force Integrator (PAFI) [2], another simulation method to compute free energies along an initial transition path, exhibits considerable concurrence with Schoeck's formalism. We conclude that entropic effects need to be considered to understand processes involving dislocations bypassing elastic barriers close to the critical resolved shear stress. More work needs to be performed to fully understand the discrepancies between Schoeck's and PAFI results compared to molecular dynamics. △ Less

Submitted 14 March, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Report number: ISSN 0927-0256

Journal ref: Computational Materials Science, 239 (2024), 112954

Cybersecurity in Critical Infrastructures: A Post-Quantum Cryptography Perspective

Authors: Javier Oliva del Moral, Antonio deMarti iOlius, Gerard Vidal, Pedro M. Crespo, Josu Etxezarreta Martinez

Abstract: The machinery of industrial environments was connected to the Internet years ago with the scope of increasing their performance. However, this change made such environments vulnerable against cyber-attacks that can compromise their correct functioning resulting in economic or social problems. Moreover, implementing cryptosystems in the communications between operational technology (OT) devices is… ▽ More The machinery of industrial environments was connected to the Internet years ago with the scope of increasing their performance. However, this change made such environments vulnerable against cyber-attacks that can compromise their correct functioning resulting in economic or social problems. Moreover, implementing cryptosystems in the communications between operational technology (OT) devices is a more challenging task than for information technology (IT) environments since the OT networks are generally composed of legacy elements, characterized by low-computational capabilities. Consequently, implementing cryptosystems in industrial communication networks faces a trade-off between the security of the communications and the amortization of the industrial infrastructure. Critical Infrastructure (CI) refers to the industries which provide key resources for the daily social and economical development, e.g. electricity. Furthermore, a new threat to cybersecurity has arisen with the theoretical proposal of quantum computers, due to their potential ability of breaking state-of-the-art cryptography protocols, such as RSA or ECC. Many global agents have become aware that transitioning their secure communications to a quantum secure paradigm is a priority that should be established before the arrival of fault-tolerance. In this paper, we aim to describe the problematic of implementing post-quantum cryptography (PQC) to CI environments. For doing so, we describe the requirements for these scenarios and how they differ against IT. We also introduce classical cryptography and how quantum computers pose a threat to such security protocols. Furthermore, we introduce state-of-the-art proposals of PQC protocols and present their characteristics. We conclude by discussing the problematic of integrating PQC in industrial environments. △ Less

Submitted 11 June, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Comments: 27 pages, 7 figures, 10 tables

An infinite class of quantum codes derived from duadic constacyclic codes

Authors: Reza Dastbasteh, Josu Etxezarreta Martinez, Andrew Nemec, Antonio deMarti iOlius, Pedro Crespo Bofill

Abstract: We present a family of quantum stabilizer codes using the structure of duadic constacyclic codes over $\mathbb{F}_4$. Within this family, quantum codes can possess varying dimensions, and their minimum distances are lower bounded by a square root bound. For each fixed dimension, this allows us to construct an infinite sequence of binary quantum codes with a growing minimum distance. Additionally,… ▽ More We present a family of quantum stabilizer codes using the structure of duadic constacyclic codes over $\mathbb{F}_4$. Within this family, quantum codes can possess varying dimensions, and their minimum distances are lower bounded by a square root bound. For each fixed dimension, this allows us to construct an infinite sequence of binary quantum codes with a growing minimum distance. Additionally, we prove that this family of quantum codes includes an infinite subclass of degenerate codes. We also introduce a technique for extending splittings of duadic constacyclic codes, providing new insights into the minimum distance and minimum odd-like weight of specific duadic constacyclic codes. Finally, we provide numerical examples of some quantum codes with short lengths within this family. △ Less

Submitted 27 May, 2024; v1 submitted 11 December, 2023; originally announced December 2023.

Comments: 31 pages, 2 tables

MSC Class: 94B05; 94B15