Showing 1–12 of 12 results for author: Luther-Davies, B

High-harmonic generation from metasurfaces empowered by bound states in the continuum

Authors: George Zograf, Kirill Koshelev, Anastasia Zalogina, Viacheslav Korolev, Duk-Yong Choi, Michael Zurch, Christian Spielmann, Barry Luther-Davies, Daniil Kartashov, Sergey Makarov, Sergey Kruk, Yuri Kivshar

Abstract: The concept of optical bound states in the continuum (BICs) underpins the existence of strongly localized waves embedded into the radiation spectrum that can enhance the electromagnetic fields in subwavelength photonic structures. Early studies of optical BICs in waveguides and photonic crystals uncovered their topological properties, and the concept of quasi-BIC metasurfaces facilitated applicati… ▽ More The concept of optical bound states in the continuum (BICs) underpins the existence of strongly localized waves embedded into the radiation spectrum that can enhance the electromagnetic fields in subwavelength photonic structures. Early studies of optical BICs in waveguides and photonic crystals uncovered their topological properties, and the concept of quasi-BIC metasurfaces facilitated applications of strong light-matter interactions to biosensing, lasing, and low-order nonlinear processes. Here we employ BIC-empowered dielectric metasurfaces to generate efficiently high optical harmonics up to the 11th order. We optimize a BIC mode for the first few harmonics and observe a transition between perturbative and nonperturbative nonlinear regimes. We also suggest a general strategy for designing subwavelength structures with strong resonances and nonperturbative nonlinearities. Our work bridges the fields of perturbative and nonperturbative nonlinear optics on the subwavelength scale. △ Less

Submitted 26 August, 2020; originally announced August 2020.

Photonic mid-infrared nulling for exoplanet detection on a planar chalcogenide platform

Authors: Harry-Dean Kenchington Goldsmith, Michael J. Ireland, Pan Ma, Barry Luther-Davies, Rongping Wang, Barnaby Noris, Peter Tuthill, Stephen J. Madden

Abstract: The future of exoplanet detection lies in the mid-infrared (MIR). The MIR region contains the blackbody peak of both hot and habitable zone exoplanets, making the contrast between starlight and planet light less extreme. It is also the region where prominent chemical signatures indicative of life exist, such as ozone at 9.7 microns. At a wavelength of 4 microns the difference in emission between a… ▽ More The future of exoplanet detection lies in the mid-infrared (MIR). The MIR region contains the blackbody peak of both hot and habitable zone exoplanets, making the contrast between starlight and planet light less extreme. It is also the region where prominent chemical signatures indicative of life exist, such as ozone at 9.7 microns. At a wavelength of 4 microns the difference in emission between an Earth-like planet and a star like our own is 80 dB. However a jovian planet, at the same separation exhibits 60 dB of contrast, or only 20 dB if it is hot due to its formation energy or being close to its host star. A two dimensional nulling interferometer, made with chalcogenide glass, has been measured to produce a null of 20 dB, limited by scattered light. Measures to increase the null depth to the theoretical limit of 60 dB are discussed. △ Less

Submitted 20 August, 2019; v1 submitted 16 February, 2018; originally announced February 2018.

Comments: Was published in SPIE: Optical and Infrared Interferometry and Imaging VI, Mike Ireland presented

Chalcogenide glass planar MIR couplers for future chip based Bracewell interferometers

Authors: Harry-Dean Kenchington Goldsmith, Nick Cvetojevic, Michael Ireland, Pan Ma, Peter Tuthill, Ben Eggleton, John S. Lawrence, Sukanta Debbarma, Barry Luther-Davies, Stephen J. Madden

Abstract: Photonic integrated circuits are established as the technique of choice for a number of astronomical processing functions due to their compactness, high level of integration, low losses, and stability. Temperature control, mechanical vibration and acoustic noise become controllable for such a device enabling much more complex processing than can realistically be considered with bulk optics. To dat… ▽ More Photonic integrated circuits are established as the technique of choice for a number of astronomical processing functions due to their compactness, high level of integration, low losses, and stability. Temperature control, mechanical vibration and acoustic noise become controllable for such a device enabling much more complex processing than can realistically be considered with bulk optics. To date the benefits have mainly been at wavelengths around 1550 nm but in the important Mid-Infrared region, standard photonic chips absorb light strongly. Chalcogenide glasses are well known for their transparency to beyond 10000 nm, and the first results from coupler devices intended for use in an interferometric nuller for exoplanetary observation in the Mid-Infrared L band (3800-4200 nm) are presented here showing that suitable performance can be obtained both theoretically and experimentally for the first fabricated devices operating at 4000 nm. △ Less

Submitted 15 August, 2016; originally announced August 2016.

Comments: in Proc. SPIE 9907, Optical and Infrared Interferometry and Imaging V, 990730 (August 4, 2016)

Low power, chip-based stimulated Brillouin scattering microwave photonic filter with ultrahigh selectivity

Authors: David Marpaung, Blair Morrison, Mattia Pagani, Ravi Pant, Duk-Yong Choi, Barry Luther-Davies, Steve J. Madden, Benjamin J. Eggleton

Abstract: Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning… ▽ More Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning range, resolution, and suppression. This problem is exacerbated in the case of integrated MWP filters, blocking the path to compact, high performance filters. Here we show the first chip-based MWP band-stop filter with ultra-high suppression, high resolution in the MHz range, and 0-30 GHz frequency tuning. This record performance was achieved using an ultra-low Brillouin gain from a compact photonic chip and a novel approach of optical resonance-assisted RF signal cancellation. The results point to new ways of creating energy-efficient and reconfigurable integrated MWP signal processors for wireless communications and defence applications. △ Less

Submitted 13 December, 2014; originally announced December 2014.

Comments: 16 pages, 5 figures

Atomically Thin Optical Lenses and Gratings

Authors: Jiong Yang, Zhu Wang, Fan Wang, Renjing Xu, Jin Tao, Shuang Zhang, Qinghua Qin, Barry Luther-Davies, Chennupati Jagadish, Zongfu Yu, Yuerui Lu

Abstract: Two-dimensional (2D) materials have emerged as promising candidates for miniaturized optoelectronic devices, due to their strong inelastic interactions with light. On the other hand, a miniaturized optical system also requires strong elastic light-matter interactions to control the flow of light. Here, we report giant optical path length (OPL) from a single-layer molybdenum disulfide (MoS2), which… ▽ More Two-dimensional (2D) materials have emerged as promising candidates for miniaturized optoelectronic devices, due to their strong inelastic interactions with light. On the other hand, a miniaturized optical system also requires strong elastic light-matter interactions to control the flow of light. Here, we report giant optical path length (OPL) from a single-layer molybdenum disulfide (MoS2), which is around one order of magnitude larger than that from a single-layer graphene. Using such giant OPL to engineer the phase front of optical beams, we demonstrated, to the best of our knowledge, the world's thinnest optical lens consisting of a few layers of MoS2 less than 6.3 nm thick. Moreover, we show that MoS2 has much better dielectric response than good conductor (like gold) and other dielectric materials (like Si, SiO2 or graphene). By taking advantage of the giant elastic scattering efficiency in ultra-thin high-index 2D materials, we demonstrated high-efficiency gratings based on a single- or few-layers of MoS2. The capability of manipulating the flow of light in 2D materials opens an exciting avenue towards unprecedented miniaturization of optical components and the integration of advanced optical functionalities. △ Less

Submitted 23 November, 2014; originally announced November 2014.

Narrow linewidth Brillouin laser based on chalcogenide photonic chip

Authors: Irina V. Kabakova, Ravi Pant, Duk-Yong Choi, Sukhanta Debbarma, Barry Luther-Davies, Stephen J. Madden, Benjamin J. Eggleton

Abstract: We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the sa… ▽ More We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the same waveguide. The slope efficiency of the laser is found to be 30% and the linewidth of 100 kHz is measured using a self-heterodyne method. △ Less

Submitted 25 July, 2013; originally announced July 2013.

Comments: 5 pages, 6 figures

Generation of correlated photon pairs in a chalcogenide As2S3 waveguide

Authors: C. Xiong, G. D. Marshall, A. Peruzzo, M. Lobino, A. S. Clark, D. -Y. Choi, S. J. Madden, C. M. Natarajan, M. G. Tanner, R. H. Hadfield, S. N. Dorenbos, T. Zijlstra, V. Zwiller, M. G. Thompson, J. G. Rarity, M. J. Steel, B. Luther-Davies, B. J. Eggleton, J. L. O'Brien

Abstract: We demonstrate the first 1550 nm correlated photon-pair source in an integrated glass platform-a chalcogenide As2S3 waveguide. A measured pair coincidence rate of 80 per second was achieved using 57 mW of continuous-wave pump. The coincidence to accidental ratio was shown to be limited by spontaneous Raman scattering effects that are expected to be mitigated by using a pulsed pump source. We demonstrate the first 1550 nm correlated photon-pair source in an integrated glass platform-a chalcogenide As2S3 waveguide. A measured pair coincidence rate of 80 per second was achieved using 57 mW of continuous-wave pump. The coincidence to accidental ratio was shown to be limited by spontaneous Raman scattering effects that are expected to be mitigated by using a pulsed pump source. △ Less

Submitted 7 November, 2010; originally announced November 2010.

Comments: 3 pages, 4 figures

Journal ref: Appl. Phys. Lett. 98, 051101 (2011)

Local tuning of photonic crystal cavities using chalcogenide glasses

Authors: Andrei Faraon, Dirk Englund, Douglas Bulla, Barry Luther-Davies, Benjamin J. Eggleton, Nick Stoltz, Pierre Petroff, Jelena Vuckovic

Abstract: We demonstrate a method to locally change the refractive index in planar optical devices by photodarkening of a thin chalcogenide glass layer deposited on top of the device. The method is used to tune the resonance of GaAs-based photonic crystal cavities by up to 3 nm at 940 nm, with only 5% deterioration in cavity quality factor. The method has broad applications for postproduction tuning of ph… ▽ More We demonstrate a method to locally change the refractive index in planar optical devices by photodarkening of a thin chalcogenide glass layer deposited on top of the device. The method is used to tune the resonance of GaAs-based photonic crystal cavities by up to 3 nm at 940 nm, with only 5% deterioration in cavity quality factor. The method has broad applications for postproduction tuning of photonic devices. △ Less

Submitted 8 November, 2007; v1 submitted 5 November, 2007; originally announced November 2007.

Comments: 3 pages, 2 figures

Gallium transformation under femtosecond laser excitation: Phase coexistence and incomplete melting

Authors: O. P. Uteza, E. G. Gamaly, A. V. Rode, M. Samoc, B. Luther-Davies

Abstract: The reversible phase transition induced by femtosecond laser excitation of Gallium has been studied by measuring the dielectric function at 775 nm with ~ 200 fs temporal resolution. The real and imaginary parts of the transient dielectric function were calculated from absolute reflectivity of Gallium layer measured at two different angles of incidence, using Fresnel formulas. The time-dependent… ▽ More The reversible phase transition induced by femtosecond laser excitation of Gallium has been studied by measuring the dielectric function at 775 nm with ~ 200 fs temporal resolution. The real and imaginary parts of the transient dielectric function were calculated from absolute reflectivity of Gallium layer measured at two different angles of incidence, using Fresnel formulas. The time-dependent electron-phonon effective collision frequency, the heat conduction coefficient and the volume fraction of a new phase were restored directly from the experimental data, and the time and space dependent electron and lattice temperatures in the layer undergoing phase transition were reconstructed without ad hoc assumptions. We converted the temporal dependence of the electron-phonon collision rate into the temperature dependence, and demonstrated, for the first time, that the electron-phonon collision rate has a non-linear character. This temperature dependence converges into the known equilibrium function during the cooling stage. The maximum fraction of a new phase in the laser-excited Gallium layer reached only 60% even when the deposited energy was two times the equilibrium enthalpy of melting. We have also demonstrated that the phase transition pace and a fraction of the transformed material depended strongly on the thickness of the laser-excited Gallium layer, which was of the order of several tens of nanometers for the whole range of the pump laser fluencies up to the damage threshold. The kinetics of the phase transformation after the laser excitation can be understood on the basis of the classical theory of the first-order phase transition while the duration of non-thermal stage appears to be comparable to the sub-picosecond pulse length. △ Less

Submitted 3 November, 2003; originally announced November 2003.

Comments: 28 pages, including 9 figs. Submitted to Phys. Rev. B 14 March 2003

Unconventional magnetism in all-carbon nanofoam

Authors: A. V. Rode, E. G. Gamaly, A. G. Christy, J. G. Fitz Gerald, S. T. Hyde, R. G. Elliman, B. Luther-Davies, A. I. Veinger, J. Androulakis, J. Giapintzakis

Abstract: We report production of nanostructured carbon foam by a high-repetition-rate, high-power laser ablation of glassy carbon in Ar atmosphere. A combination of characterization techniques revealed that the system contains both sp2 and sp3 bonded carbon atoms. The material is a novel form of carbon in which graphite-like sheets fill space at very low density due to strong hyperbolic curvature, as pro… ▽ More We report production of nanostructured carbon foam by a high-repetition-rate, high-power laser ablation of glassy carbon in Ar atmosphere. A combination of characterization techniques revealed that the system contains both sp2 and sp3 bonded carbon atoms. The material is a novel form of carbon in which graphite-like sheets fill space at very low density due to strong hyperbolic curvature, as proposed for ?schwarzite?. The foam exhibits ferromagnetic-like behaviour up to 90 K, with a narrow hysteresis curve and a high saturation magnetization. Such magnetic properties are very unusual for a carbon allotrope. Detailed analysis excludes impurities as the origin of the magnetic signal. We postulate that localized unpaired spins occur because of topological and bonding defects associated with the sheet curvature, and that these spins are stabilized due to the steric protection offered by the convoluted sheets. △ Less

Submitted 30 October, 2003; originally announced October 2003.

Comments: 14 pages, including 2 tables and 7 figs. Submitted to Phys Rev B 10 September 2003

Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics

Authors: E. G. Gamaly, A. V. Rode, V. T. Tikhonchuk, B. Luther-Davies

Abstract: The mechanism of ablation of solids by intense femtosecond laser pulses is described in an explicit analytical form. It is shown that at high intensities when the ionization of the target material is complete before the end of the pulse, the ablation mechanism is the same for both metals and dielectrics. The physics of this new ablation regime involves ion acceleration in the electrostatic field… ▽ More The mechanism of ablation of solids by intense femtosecond laser pulses is described in an explicit analytical form. It is shown that at high intensities when the ionization of the target material is complete before the end of the pulse, the ablation mechanism is the same for both metals and dielectrics. The physics of this new ablation regime involves ion acceleration in the electrostatic field caused by charge separation created by energetic electrons escaping from the target. The formulae for ablation thresholds and ablation rates for metals and dielectrics, combining the laser and target parameters, are derived and compared to experimental data. The calculated dependence of the ablation thresholds on the pulse duration is in agreement with the experimental data in a femtosecond range, and it is linked to the dependence for nanosecond pulses. △ Less

Submitted 14 February, 2001; originally announced February 2001.

Comments: 27 pages incl.3 figs; presented at CLEO-Europe'2000 11-15 Sept.2000; papers QMD6 and CTuK114

Observation of dipole-mode vector solitons

Authors: Wieslaw Krolikowski, Elena A. Ostrovskaya, Carsten Weilnau, Matthias Geisser, Glen McCarthy, Yuri S. Kivshar, Cornelia Denz, Barry Luther-Davies

Abstract: We report on the first experimental observation of a novel type of optical vector soliton, a {\em dipole-mode soliton}, recently predicted theoretically. We show that these vector solitons can be generated in a photorefractive medium employing two different processes: a phase imprinting, and a symmetry-breaking instability of a vortex-mode vector soliton. The experimental results display remarka… ▽ More We report on the first experimental observation of a novel type of optical vector soliton, a {\em dipole-mode soliton}, recently predicted theoretically. We show that these vector solitons can be generated in a photorefractive medium employing two different processes: a phase imprinting, and a symmetry-breaking instability of a vortex-mode vector soliton. The experimental results display remarkable agreement with the theory, and confirm the robust nature of these radially asymmetric two-component solitary waves. △ Less

Submitted 9 August, 2000; originally announced August 2000.

Comments: 4 pages, 8 figures; pictures in the PRL version are better quality

Journal ref: Phys. Rev. Lett., v.85, p. 1424 (2000)