-
Scalable DAQ system operating the CHIPS-5 neutrino detector
Authors:
Belén Alonso Rancurel,
Son Cao,
Thomas J. Carroll,
Rhys Castellan,
Erika Catano-Mur,
John P. Cesar,
João A. B. Coelho,
Patrick Dills,
Thomas Dodwell,
Jack Edmondson,
Daan van Eijk,
Quinn Fetterly,
Zoé Garbal,
Stefano Germani,
Thomas Gilpin,
Anthony Giraudo,
Alec Habig,
Daniel Hanuska,
Harry Hausner,
Wilson Y. Hernandez,
Anna Holin,
Junting Huang,
Sebastian B. Jones,
Albrecht Karle,
George Kileff
, et al. (35 additional authors not shown)
Abstract:
The CHIPS R&D project focuses on development of low-cost water Cherenkov neutrino detectors through novel design strategies and resourceful engineering. This work presents an end-to-end DAQ solution intended for a recent 5 kt CHIPS prototype, which is largely based on affordable mass-produced components. Much like the detector itself, the presented instrumentation is composed of modular arrays tha…
▽ More
The CHIPS R&D project focuses on development of low-cost water Cherenkov neutrino detectors through novel design strategies and resourceful engineering. This work presents an end-to-end DAQ solution intended for a recent 5 kt CHIPS prototype, which is largely based on affordable mass-produced components. Much like the detector itself, the presented instrumentation is composed of modular arrays that can be scaled up and easily serviced. A single such array can carry up to 30 photomultiplier tubes (PMTs) accompanied by electronics that generate high voltage in-situ and deliver time resolution of up to 0.69 ns. In addition, the technology is compatible with the White Rabbit timing system, which can synchronize its elements to within 100 ps. While deployment issues did not permit the presented DAQ system to operate beyond initial evaluation, the presented hardware and software successfully passed numerous commissioning tests that demonstrated their viability for use in a large-scale neutrino detector, instrumented with thousands of PMTs.
△ Less
Submitted 20 August, 2024;
originally announced August 2024.
-
The Design and Construction of the Chips Water Cherenkov Neutrino Detector
Authors:
B. Alonso Rancurel,
N. Angelides,
G. Augustoni,
S. Bash,
B. Bergmann,
N. Bertschinger,
P. Bizouard,
M. Campbell,
S. Cao,
T. J. Carroll,
R. Castellan,
E. Catano-Mur,
J. P. Cesar,
J. A. B. Coelho,
P. Dills,
T. Dodwell,
J. Edmondson,
D. van Eijk,
Q. Fetterly,
Z. Garbal,
S. Germani,
T. Gilpin,
A. Giraudo,
A. Habig,
D. Hanuska
, et al. (42 additional authors not shown)
Abstract:
CHIPS (CHerenkov detectors In mine PitS) was a prototype large-scale water Cherenkov detector located in northern Minnesota. The main aim of the R&D project was to demonstrate that construction costs of neutrino oscillation detectors could be reduced by at least an order of magnitude compared to other equivalent experiments. This article presents design features of the CHIPS detector along with de…
▽ More
CHIPS (CHerenkov detectors In mine PitS) was a prototype large-scale water Cherenkov detector located in northern Minnesota. The main aim of the R&D project was to demonstrate that construction costs of neutrino oscillation detectors could be reduced by at least an order of magnitude compared to other equivalent experiments. This article presents design features of the CHIPS detector along with details of the implementation and deployment of the prototype. While issues during and after the deployment of the detector prevented data taking, a number of key concepts and designs were successfully demonstrated.
△ Less
Submitted 25 September, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
Isoperimetric Regions in $\mathbb{R}^n$ with density $r^p$
Authors:
Wyatt Boyer,
Bryan Brown,
Gregory R. Chambers,
Alyssa Loving,
Sarah Tammen
Abstract:
We show that the unique isoperimetric hypersurfaces in $\mathbb{R}^n$ with density $r^p$ for $n \ge 3$ and $p>0$ are spheres that pass through the origin.
We show that the unique isoperimetric hypersurfaces in $\mathbb{R}^n$ with density $r^p$ for $n \ge 3$ and $p>0$ are spheres that pass through the origin.
△ Less
Submitted 7 October, 2016; v1 submitted 7 April, 2015;
originally announced April 2015.
-
DEMO Hot Cell and Ex-Vessel Remote Handling
Authors:
Justin Thomas,
Antony Loving,
Christian Bachmann,
Jon Harman
Abstract:
In Europe the work on the specification and design of a Demonstration Power Plant (DEMO) is being carried out by EFDA in the Power Plant Physics and Technology (PPP&T) programme. DEMO will take fusion from experimental research into showing the potential for commercial power generation. This paper describes the first steps being taken towards the design of the DEMO Hot Cell. It will show a compari…
▽ More
In Europe the work on the specification and design of a Demonstration Power Plant (DEMO) is being carried out by EFDA in the Power Plant Physics and Technology (PPP&T) programme. DEMO will take fusion from experimental research into showing the potential for commercial power generation. This paper describes the first steps being taken towards the design of the DEMO Hot Cell. It will show a comparison of the current DEMO in-vessel maintenance concepts from a Hot Cell perspective, describe a proposed ex-vessel transport system, and summarize the facilities that have been identified as required within the Hot Cell, examine current RH technology and discuss the identified critical development issues.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
-
Pre-conceptual Design Assessment of DEMO Remote Maintenance
Authors:
A. Loving,
O. Crofts,
N. Sykes,
D. Iglesias,
M. Coleman,
J. Thomas,
J. Harman,
U. Fischer,
J. Sanz,
M. Siuko,
M. Mittwollen,
others
Abstract:
EDFA, as part of the Power Plant Physics and Technology programme, has been working on the pre-conceptual design of a Demonstration Power Plant (DEMO). As part of this programme, a review of the remote maintenance strategy considered maintenance solutions compatible with expected environmental conditions, whilst showing potential for meeting the plant availability targets. A key finding was that,…
▽ More
EDFA, as part of the Power Plant Physics and Technology programme, has been working on the pre-conceptual design of a Demonstration Power Plant (DEMO). As part of this programme, a review of the remote maintenance strategy considered maintenance solutions compatible with expected environmental conditions, whilst showing potential for meeting the plant availability targets. A key finding was that, for practical purposes, the expected radiation levels prohibit the use of complex remote handling operations to replace the first wall. In 2012/13, these remote maintenance activities were further extended, providing an insight into the requirements, constraints and challenges. In particular, the assessment of blanket and divertor maintenance, in light of the expected radiation conditions and availability, has elaborated the need for a very different approach from that of ITER. This activity has produced some very informative virtual reality simulations of the blanket segments and pipe removal that are exceptionally valuable in communicating the complexity and scale of the required operations. Through these simulations, estimates of the maintenance task durations have been possible demonstrating that a full replacement of the blankets within 6 months could be achieved. The design of the first wall, including the need to use sacrificial limiters must still be investigated. In support of the maintenance operations, a first indication of the requirements of an Active Maintenance Facility (AMF) has been elaborated.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
