-
Ion mobility and segregation in seed surfaces subjected to cold plasma treatments
Authors:
Alvaro Perea-Brenes,
Natalia Ruiz-Pino,
Francisco Yubero,
Jose Luis Garcia,
Agustín R. Gonzalez-Elipe,
Ana Gomez-Ramirez,
Antonio Prados,
Carmen Lopez-Santos
Abstract:
Plasma treatment of seeds is an efficient procedure to accelerate germination, to improve initial stages of plant growth and for protection against pathogens infection. Most studies relate these beneficial effects with biochemical modifications affecting the metabolism and genetical growth factors of seeds and young plants. Using barley seeds, in this work we investigate the redistribution of ions…
▽ More
Plasma treatment of seeds is an efficient procedure to accelerate germination, to improve initial stages of plant growth and for protection against pathogens infection. Most studies relate these beneficial effects with biochemical modifications affecting the metabolism and genetical growth factors of seeds and young plants. Using barley seeds, in this work we investigate the redistribution of ions in the seed surface upon their treatment with cold air plasmas. In addition, we investigate the effect of plasma in the lixiviation of ions through the seeds hull when they are immersed in water. Ions re-distribution in the outer layers of air plasma treated seeds has been experimentally determined through X-ray Photoelectron Spectroscopy analysis in combination with chemical in-depth profiling with gas cluster ion beams. The results show that in the shallowest layers of the seed hull (at least up to a depth of 100 nm) there is an enrichment of K+ and Ca2+ ions, in addition to changes in the O/C and N/C atomic ratios. These data have been confirmed with the electron microscopy/fluorescence analysis of seed cuts. Observations have been accounted for by a Monte Carlo model simulating the electrostatic interactions that develop between the negative charge accumulated at the seed surface due to the interaction with the plasma sheath and the positive ions existing in the interior of seeds. Furthermore, it is shown that upon water immersion of plasma treated seeds mobilized ions tend to lixiviate more efficiently than in pristine seeds. The detection of a significant concentration of NO3- anions in the water has been attributed to a secondary reaction of nitrogen species incorporated into the seeds during plasma exposure with reactive oxygen species formed on their surface during this treatment. The implications of these findings for the improvement of germination capacity of seeds are discussed.
△ Less
Submitted 18 February, 2025;
originally announced March 2025.
-
Water-resistant hybrid perovskite solar cell -- drop triboelectric energy harvester
Authors:
Fernando Nunez-Galvez,
Xabier Garcia-Casas,
Lidia Contreras Bernal,
Alejandro Descalzo,
Jose Manuel Obrero-Perez,
Juan Pedro Espinos,
Angel Barranco,
Ana Borras,
Juan Ramon Sanchez-Valencia,
Carmen Lopez-Santos
Abstract:
The stability and reproducibility issues related to metal halide Perovskite Solar Cells (PSCs) have prevented so far from exploiting this highly efficient photovoltaic technology under rainy or even moisture conditions and in combination with drop triboelectric nanogenerators (D-TENGs). Protecting the PSCs with a waterproof encapsulator could overcome such a disadvantage. Herein, we propose the im…
▽ More
The stability and reproducibility issues related to metal halide Perovskite Solar Cells (PSCs) have prevented so far from exploiting this highly efficient photovoltaic technology under rainy or even moisture conditions and in combination with drop triboelectric nanogenerators (D-TENGs). Protecting the PSCs with a waterproof encapsulator could overcome such a disadvantage. Herein, we propose the implementation of fluorinated carbon (CFx) coatings produced by PECVD, enabling waterproof capability for the PSC and working as an energy harvesting surface for D-TENGs. These 100 nm - films present optimal optical transmittance, fully preserving the photovoltaic parameters of the cell. The improved long-term stability of the water-resistant PSCs prevents degradation under illumination in outdoor or simulated adverse environments with high humidity, high temperature, water immersion, or rain. As a remarkable result, the 50% Power Conversion Efficiency (PCE) has been retained after ten days of illumination under 100% relative humidity at 50 degrees Celsius. Also, the CFx coatings were successfully tested as a promoter agent to integrate commercial UV-curable sealants compatible with Spiro-OMeTAD, enhancing the performance stability of up to 80 % of PCE after 100 hours under illumination in a humid environment. This PSC was tested in a top-bottom electrode configuration for harvesting kinetic energy from droplets. Devices were compatible with simultaneously working as D-TENG and photovoltaic cells, yielding voltage outputs up to 12 V with maximum peak power density reaching 2.75 uW/cm2 defined by the D-TENG and PCE of 11.5 % and 8.46 mA/cm2 of short circuit current determined by the PSC under dripping and for an illumination angle of 45 degrees. The durability of the multisource device was tested under constant illumination and periodical drop impacting for more than 5 hours.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Triboelectric Pixels as building blocks for microscale and large area integration of drop energy harvesters
Authors:
Ali Ghaffarinejad,
Xabier Garcia-Casas,
Fernando Nunez-Galvez,
Jorge Budagosky,
Vanda Godinho,
Carmen Lopez-Santos,
Juan Ramon Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, wher…
▽ More
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, where triboelectric nanogenerators have been revealed as the most promising relevant actors. However, despite widespread attempts by researchers, the drop energy harvesters' output power is still low, mainly because of the limitations in candidates endowed with ideal triboelectric and wetting properties and also the non-optimal and centimetre-scale device architecture that prevents the conversion of the complete kinetic energy of impinging drops. Herein, we disclose a microscale triboelectric nanogenerator that can harvest a high density of electrical power from drops through a single, submillisecond, long-lasting step. The mechanism relies on an instantaneous electrical capacitance variation owing to the high-speed contact of the drops with the electrodes' active area. We discuss the role of the precharged effect of the triboelectric surface in the time characteristic of the conversion event. The capacitive and microscale structure of the device is endowed with a small form factor that allows for the production of densely packed arrays. The proposed architecture can be adjusted to different liquids and scales and is compatible with a variety of triboelectric surfaces, including flexible, transparent, and thin-film approaches.
△ Less
Submitted 15 August, 2024; v1 submitted 3 May, 2024;
originally announced May 2024.
-
Conformal TiO$_2$ aerogel-like films by plasma deposition: from omniphobic antireflective coatings to perovskite solar cells photoelectrodes
Authors:
Jose M. Obrero,
Lidia Contreras-Bernal,
Francisco J. Aparicio,
Teresa C. Rojas,
Francisco J. Ferrer,
Noe Orozco,
Zineb Saghi,
Triana Czermak,
Jose M. Pedrosa,
Carmen Lopez-Santos,
Kostya,
Ostrikov,
Ana Borras,
Juan Ramon Sanchez-Valencia,
Angel Barranco
Abstract:
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while mainta…
▽ More
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultra-porous titanium dioxide thin films at room or mild temperatures (T lower or equal to 120 degrees Celsius) by the sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85 percent that are comparable to advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures presenting a distribution of anatase clusters embedded in the sponge-like structure. Surprisingly, the porous structure remains after annealing the films at 450 degrees Celsius in air, which increases the fraction of the embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive becoming super-hydrophilic subjected to UV light irradiation The supported percolated nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel film thickness reaching efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and is applicable to ultra-high porous conformal oxides of different compositions with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
A holistic solution to icing by acoustic waves: de-icing, active anti-icing, sensing with piezoelectric crystals, and synergy with thin film passive anti-icing solutions
Authors:
Jaime del Moral,
Laura Montes,
Victor J. Rico,
Carmen Lopez-Santos,
Stefan Jacob,
Manuel Oliva,
Jorge Gil-Rostra,
Armaghan Fakhfouri,
Shilpi Pandey,
Miguel Gonzalez,
Julio Mora,
Paloma Garcia-Gallego,
Pablo F. Ibanez-Ibanez,
Miguel A. Rodriguez-Valverde,
Andreas Winkler,
Ana Borras,
Agustin R. Gonzalez-Elipe
Abstract:
Icing has become a hot topic both in academia and in the industry given its implications in strategic sectors such as transport, robotics, wind turbines, photovoltaics, and electricity supply. Recently proposed de-icing solutions involving the propagation of acoustic waves (AWs) at suitable substrates may open the path for a sustainable alternative to standard de-icing or anti-icing protocols. Her…
▽ More
Icing has become a hot topic both in academia and in the industry given its implications in strategic sectors such as transport, robotics, wind turbines, photovoltaics, and electricity supply. Recently proposed de-icing solutions involving the propagation of acoustic waves (AWs) at suitable substrates may open the path for a sustainable alternative to standard de-icing or anti-icing protocols. Herein we experimentally unravel some of the basic interactions that contribute to the de-icing and/or hinder the icing (ice accretion) on AW-activated substrates. The response toward icing of a model substrate system consisting of a piezoelectric LiNbO3 plate AW activated by radio-frequency (rf) signaling to planar electrodes has been characterized both at a laboratory scale and in an icing wind tunnel under forced convection conditions. Main features related to de-icing mechanisms, a decrease of ice adhesion, or the avoidance of ice accretion have been disclosed by this holistic investigation. Furthermore, additional experiments have shown that the piezoelectric substrate surfaces modified with a fluorinated ZnO thin film or a ZnO/CFx bilayer present anti-icing functionality and a synergistic response when activated with AWs. A careful analysis of the dependence of resonance frequency of the piezoelectric substrates on experimental variables such as temperature, ice formation, or wind velocity shows that this parameter can be used as an internal control procedure for real-time monitoring of icing processes onto AW-activated devices
△ Less
Submitted 15 August, 2022; v1 submitted 29 July, 2022;
originally announced July 2022.
-
Highly anisotropic organometal halide perovskite nanowalls grown by Glancing Angle Deposition
Authors:
Javier Castillo-Seoane,
Lidia Contreras-Bernal,
Jose M. Obrero-Perez,
Xabier Garcia-Casas,
Francisco Lorenzo-Lazaro,
Francisco J. Aparicio,
M. Carmen Lopez-Santos,
T. Cristina Rojas,
Juan A. Anta,
Ana Borras,
Angel Barranco,
Juan R. Sanchez-Valencia
Abstract:
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexibl…
▽ More
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexible synthesis with under design optical properties . Therefore, along with their outstanding electrical properties have elevated hybrid perovskites as the material of choice in photovoltaics and optoelectronics. Among the different organometal halide perovskite nanostructures, nanowires and nanorods have lately arise as key players for the control of light polarization for lighting or detector applications. Herein, we will present the unprecedented fabrication of highly aligned and anisotropic methylammonium lead iodide (MAPI) perovskite nanowalls by Glancing Angle Deposition of PbI2 under high vacuum followed by CH3NH3I deposition at normal angle. Our approach offers a direct route for the fabrication of perovskite nanostructures virtually on any substrate, including on photovoltaic devices. The unparalleled alignment degree of the perovskite nanowalls provides the samples with strong anisotropic optical properties such as light absorption and photoluminescence, the latter with a maximum polarization ratio of P=0.43. Furthermore, the implementation of the MAPI nanowalls in photovoltaic devices provides them with a polarization-sensitive response, with a maximum photocurrent difference of 2.1 % when illuminating with the near-infrared range of the solar spectrum (>700 nm). Our facile vacuum-based approach embodies a milestone in the development of last generation polarization-sensitive perovskite-based optoelectronic devices such as lighting appliances or self-powered photodetectors.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Plasma engineering of microstructured piezo and triboelectric hybrid nanogenerators for wide bandwidth vibration energy harvesting
Authors:
Xabier García-Casas,
Ali Ghaffarinehad,
Francisco J. Aparicio,
Javier Castillo-Seoane,
Carmen López-Santos,
Juan P. Espinós,
José Cotrino,
Juan Ramón Sánchez-Valencia,
Ángel Barranco,
Ana Borrás
Abstract:
We introduce herein the advanced application of low pressure plasma procedures for the development of piezo and triboelectric mode I hybrid nanogenerators. Thus, plasma assisted deposition and functionalization methods are presented as key enabling technologies for the nanoscale design of ZnO polycrystalline shells, the formation of conducting metallic cores in core@shell nanowires, and for the so…
▽ More
We introduce herein the advanced application of low pressure plasma procedures for the development of piezo and triboelectric mode I hybrid nanogenerators. Thus, plasma assisted deposition and functionalization methods are presented as key enabling technologies for the nanoscale design of ZnO polycrystalline shells, the formation of conducting metallic cores in core@shell nanowires, and for the solventless surface modification of polymeric coatings and matrixes. We show how the perfluorinated chains grafting of PDMS provides a reliable approach to increase the hydrophobicity and surface charges at the same time that keeping the PDMS mechanical properties. In this way, we produce efficient Ag/ZnO convoluted piezoelectric nanogenerators supported on flexible substrates and embedded in PDMS compatible with a contact separation triboelectric architecture. Factors like crystal-line texture, ZnO thickness, nanowires aspect ratio, and surface chemical modification of the PDMS are explored to optimize the power output of the nanogenerators aimed for harvesting from low-frequency vibrations. Just by manual trigger-ing, the hybrid device can charge a microcapacitor to switch on an array of color LEDs. Outstandingly, this simple three-layer architecture allows for harvesting vibration energy in a wide bandwidth, thus, we show the performance characteristics for frequencies between 1 Hz to 50 Hz and demonstrate the successful activation of the system up to ca. 800 Hz
△ Less
Submitted 9 September, 2021; v1 submitted 22 August, 2021;
originally announced August 2021.
