-
A cryogenic test-mass suspension with flexures operating in compression for third-generation gravitational-wave detectors
Authors:
Fabián E. Peña Arellano,
Nelson L. Leon,
Leonardo González López,
Riccardo DeSalvo,
Harry Themann,
Esra Zerina Appavuravther,
Guerino Avallone,
Francesca Badaracco,
Mark A. Barton,
Alessandro Bertolini,
Christian Chavez,
Andy Damas,
Richard Damas,
Britney Gallego,
Eric Hennes,
Gerardo Iannone,
Seth Linker,
Marina Mondin,
Claudia Moreno,
Kevin Pang,
Stefano Selleri,
Mynor Soto,
Flavio Travasso,
Joris Van-Heijningen,
Fernando Velez
, et al. (1 additional authors not shown)
Abstract:
This paper presents an analysis of the conceptual design of a novel silicon suspension for the cryogenic test-mass mirrors of the low-frequency detector of the Einstein Telescope gravitational-wave observatory. In traditional suspensions, tensional stress is a severe limitation for achieving low thermal noise, safer mechanical margins and high thermal conductance simultaneously. In order to keep t…
▽ More
This paper presents an analysis of the conceptual design of a novel silicon suspension for the cryogenic test-mass mirrors of the low-frequency detector of the Einstein Telescope gravitational-wave observatory. In traditional suspensions, tensional stress is a severe limitation for achieving low thermal noise, safer mechanical margins and high thermal conductance simultaneously. In order to keep the tensional stress sufficiently low, we propose the use of rigid beams with large cross sections, combined with short flexures under compressional load. This configuration takes advantage of the many times higher strength of silicon in compression to respect to its strength in tension. The flexures are mechanically robust and at the same time soft in the working direction, thus producing low suspension thermal noise and, by being short, provide high thermal conductance for cryogenic cooling. The rigid beams, located between the test mass and an intermediate mass, allow the elimination of the recoil mass used conventionally for applying control forces for interferometer lock, and the use of optical anti-springs to reduce the pendulum resonant frequency to further improve the vibration isolation of the test mass. The configuration has the capability to reach a lower mirror operational temperature, which is expected to produce a substantial reduction of the thermal noise in the mirrors of the interferometer.
△ Less
Submitted 24 March, 2025;
originally announced March 2025.
-
Large Physics Models: Towards a collaborative approach with Large Language Models and Foundation Models
Authors:
Kristian G. Barman,
Sascha Caron,
Emily Sullivan,
Henk W. de Regt,
Roberto Ruiz de Austri,
Mieke Boon,
Michael Färber,
Stefan Fröse,
Faegheh Hasibi,
Andreas Ipp,
Rukshak Kapoor,
Gregor Kasieczka,
Daniel Kostić,
Michael Krämer,
Tobias Golling,
Luis G. Lopez,
Jesus Marco,
Sydney Otten,
Pawel Pawlowski,
Pietro Vischia,
Erik Weber,
Christoph Weniger
Abstract:
This paper explores ideas and provides a potential roadmap for the development and evaluation of physics-specific large-scale AI models, which we call Large Physics Models (LPMs). These models, based on foundation models such as Large Language Models (LLMs) - trained on broad data - are tailored to address the demands of physics research. LPMs can function independently or as part of an integrated…
▽ More
This paper explores ideas and provides a potential roadmap for the development and evaluation of physics-specific large-scale AI models, which we call Large Physics Models (LPMs). These models, based on foundation models such as Large Language Models (LLMs) - trained on broad data - are tailored to address the demands of physics research. LPMs can function independently or as part of an integrated framework. This framework can incorporate specialized tools, including symbolic reasoning modules for mathematical manipulations, frameworks to analyse specific experimental and simulated data, and mechanisms for synthesizing theories and scientific literature. We begin by examining whether the physics community should actively develop and refine dedicated models, rather than relying solely on commercial LLMs. We then outline how LPMs can be realized through interdisciplinary collaboration among experts in physics, computer science, and philosophy of science. To integrate these models effectively, we identify three key pillars: Development, Evaluation, and Philosophical Reflection. Development focuses on constructing models capable of processing physics texts, mathematical formulations, and diverse physical data. Evaluation assesses accuracy and reliability by testing and benchmarking. Finally, Philosophical Reflection encompasses the analysis of broader implications of LLMs in physics, including their potential to generate new scientific understanding and what novel collaboration dynamics might arise in research. Inspired by the organizational structure of experimental collaborations in particle physics, we propose a similarly interdisciplinary and collaborative approach to building and refining Large Physics Models. This roadmap provides specific objectives, defines pathways to achieve them, and identifies challenges that must be addressed to realise physics-specific large scale AI models.
△ Less
Submitted 9 January, 2025;
originally announced January 2025.
-
Critical behavior of self-assembled rigid rods on two-dimensional lattices: Bethe-Peierls approximation and Monte Carlo simulations
Authors:
L. G. López,
D. H. Linares,
A. J. Ramirez-Pastor,
D. A. Stariolo,
S. A. Cannas
Abstract:
The critical behavior of adsorbed monomers that reversibly polymerize into linear chains with restricted orientations relative to the substrate has been studied. In the model considered here, which is known as self-assembled rigid rods (SAARs) model, the surface is represented by a twodimensional lattice and a continuous orientational transition occurs as a function of temperature and coverage. Th…
▽ More
The critical behavior of adsorbed monomers that reversibly polymerize into linear chains with restricted orientations relative to the substrate has been studied. In the model considered here, which is known as self-assembled rigid rods (SAARs) model, the surface is represented by a twodimensional lattice and a continuous orientational transition occurs as a function of temperature and coverage. The phase diagrams were obtained for the square, triangular and honeycomb lattices by means of Monte Carlo simulations and finite-size scaling analysis. The numerical results were compared with Bethe-Peierls analytical predictions about the orientational transition for the square and triangular lattices. The analysis of the phase diagrams, along with the behavior of the critical average rod lengths, showed that the critical properties of the model do not depend on the structure of the lattice at low temperatures (coverage), revealing a one-dimensional behavior in this regime. Finally, the universality class of the SAARs model, which has been subject of controversy, has been revisited.
△ Less
Submitted 4 March, 2013;
originally announced March 2013.
-
Adsorption of Self-Assembled Rigid Rods on Two-Dimensional Lattices
Authors:
L. G. López,
A. J. Ramirez-Pastor
Abstract:
Monte Carlo (MC) simulations have been carried out to study the adsorption on square and triangular lattices of particles with two bonding sites that, by decreasing temperature or increasing density, polymerize reversibly into chains with a discrete number of allowed directions and, at the same time, undergo a continuous isotropic-nematic (IN) transition. The process has been monitored by followin…
▽ More
Monte Carlo (MC) simulations have been carried out to study the adsorption on square and triangular lattices of particles with two bonding sites that, by decreasing temperature or increasing density, polymerize reversibly into chains with a discrete number of allowed directions and, at the same time, undergo a continuous isotropic-nematic (IN) transition. The process has been monitored by following the behavior of the adsorption isotherms for different values of lateral interaction energy/temperature. The numerical data were compared with mean-field analytical predictions and exact functions for noninteracting and 1D systems. The obtained results revealed the existence of three adsorption regimes in temperature. (1) At high temperatures, above the critical one characterizing the IN transition at full coverage Tc(θ=1), the particles are distributed at random on the surface and the adlayer behaves as a noninteracting 2D system. (2) At very low temperatures, the asymmetric monomers adsorb forming chains over almost the entire range of coverage, and the adsorption process behaves as a 1D problem. (3) In the intermediate regime, the system exhibits a mixed regime and the filling of the lattice proceeds according to two different processes. In the first stage, the monomers adsorb isotropically on the lattice until the IN transition occurs in the system and, from this point, particles adsorb forming chains so that the adlayer behaves as a 1D fluid. The two adsorption processes are present in the adsorption isotherms, and a marked singularity can be observed that separates both regimes. Thus, the adsorption isotherms appear as sensitive quantities with respect to the IN phase transition, allowing us (i) to reproduce the phase diagram of the system for square lattices and (ii) to obtain an accurate determination of the phase diagram for triangular lattices.
△ Less
Submitted 5 November, 2012;
originally announced November 2012.
-
Comment on: "Effect of polydispersity on the ordering transition of adsorbed self-assembled rigid rods"
Authors:
L. G. López,
D. H. Linares,
A. J. Ramirez-Pastor
Abstract:
The critical behavior of self-assembled rigid rods on a square lattice was recently reinvestigated by Almarza et al. [Phys. Rev. E 82, 061117 (2010)]. Based on the Binder cumulants and the value of the critical exponent of the correlation length, the authors found that the isotropic-nematic phase transition occurring in the system is in the two-dimensional Ising universality class. This conclusion…
▽ More
The critical behavior of self-assembled rigid rods on a square lattice was recently reinvestigated by Almarza et al. [Phys. Rev. E 82, 061117 (2010)]. Based on the Binder cumulants and the value of the critical exponent of the correlation length, the authors found that the isotropic-nematic phase transition occurring in the system is in the two-dimensional Ising universality class. This conclusion contrasts with that of a previous study [López et al., Phys. Rev. E 80, 040105 (R) (2009)] which indicates that the transition at intermediate density belongs to the q = 1 Potts universality class. Almarza et al. attributed the discrepancy to the use of the density as the control parameter by López et al. The present work shows that this suggestion is not sufficient, and that the discrepancy arises solely from the use of different statistical ensembles. Finally, the necessity of making corrections to the scaling functions in the canonical ensemble is discussed.
△ Less
Submitted 1 May, 2012;
originally announced May 2012.
-
Phase diagram of self-assembled rigid rods on two-dimensional lattices: Theory and Monte Carlo simulations
Authors:
L. G. López,
D. H. Linares,
A. J. Ramirez-Pastor,
S. A. Cannas
Abstract:
Monte Carlo simulations and finite-size scaling analysis have been carried out to study the critical behavior in a two-dimensional system of particles with two bonding sites that, by decreasing temperature or increasing density, polymerize reversibly into chains with discrete orientational degrees of freedom and, at the same time, undergo a continuous isotropic-nematic (IN) transition. A complete…
▽ More
Monte Carlo simulations and finite-size scaling analysis have been carried out to study the critical behavior in a two-dimensional system of particles with two bonding sites that, by decreasing temperature or increasing density, polymerize reversibly into chains with discrete orientational degrees of freedom and, at the same time, undergo a continuous isotropic-nematic (IN) transition. A complete phase diagram was obtained as a function of temperature and density. The numerical results were compared with mean field (MF) and real space renormalization group (RSRG) analytical predictions about the IN transformation. While the RSRG approach supports the continuous nature of the transition, the MF solution predicts a first-order transition line and a tricritical point, at variance with the simulation results.
△ Less
Submitted 12 October, 2010;
originally announced October 2010.
-
Critical behavior of self-assembled rigid rods on triangular and honeycomb lattices
Authors:
L. G. López,
D. H. Linares,
A. J. Ramirez-Pastor
Abstract:
Using Monte Carlo simulations and finite-size scaling analysis, the critical behavior of self-assembled rigid rods on triangular and honeycomb lattices at intermediate density has been studied. The system is composed of monomers with two attractive (sticky) poles that, by decreasing temperature or increasing density, polymerize reversibly into chains with three allowed directions and, at the same…
▽ More
Using Monte Carlo simulations and finite-size scaling analysis, the critical behavior of self-assembled rigid rods on triangular and honeycomb lattices at intermediate density has been studied. The system is composed of monomers with two attractive (sticky) poles that, by decreasing temperature or increasing density, polymerize reversibly into chains with three allowed directions and, at the same time, undergo a continuous isotropic-nematic (IN) transition. The determination of the critical exponents, along with the behavior of Binder cumulants, indicate that the IN transition belongs to the q=1 Potts universality class.
△ Less
Submitted 12 October, 2010;
originally announced October 2010.
-
Critical exponents and universality for the isotropic-nematic phase transition in a system of self-assembled rigid rods on a lattice
Authors:
L. G. López,
D. H. Linares,
A. J. Ramirez-Pastor
Abstract:
Monte Carlo simulations have been carried out for a system of monomers on square lattices that, by decreasing temperature or increasing density, polymerize reversibly into chains with two allowed directions and, at the same time, undergo a continuous isotropic-nematic (I-N) transition. The results show that the self-assembly process affects the nature of the transition. Thus, the determination o…
▽ More
Monte Carlo simulations have been carried out for a system of monomers on square lattices that, by decreasing temperature or increasing density, polymerize reversibly into chains with two allowed directions and, at the same time, undergo a continuous isotropic-nematic (I-N) transition. The results show that the self-assembly process affects the nature of the transition. Thus, the determination of the critical exponents indicates that the universality class of the I-N transition changes from two-dimensional Ising-type for monodisperse rods without self-assembly to q=1 Potts-type for self-assembled rods.
△ Less
Submitted 16 October, 2009; v1 submitted 1 April, 2009;
originally announced April 2009.
