Showing 1–50 of 150 results for author: Lindner, A

Simulation and measurement of Black Body Radiation background in a Transition Edge Sensor

Authors: José Alejandro Rubiera Gimeno, Katharina-Sophie Isleif, Friederike Januschek, Axel Lindner, Manuel Meyer, Gulden Othman, Elmeri Rivasto, Rikhav Shah, Christina Schwemmbauer

Abstract: The Any Light Particle Search II (ALPS II) experiment at DESY, Hamburg, is a Light-Shining-through-a-Wall (LSW) experiment aiming to probe the existence of axions and axion-like particles (ALPs), which are candidates for dark matter. Data collection in ALPS II is underway utilizing a heterodyne-based detection scheme. A complementary run for confirmation or as an alternative method is planned usin… ▽ More The Any Light Particle Search II (ALPS II) experiment at DESY, Hamburg, is a Light-Shining-through-a-Wall (LSW) experiment aiming to probe the existence of axions and axion-like particles (ALPs), which are candidates for dark matter. Data collection in ALPS II is underway utilizing a heterodyne-based detection scheme. A complementary run for confirmation or as an alternative method is planned using single photon detection, requiring a sensor capable of measuring low-energy photons ($1064\,\mathrm{nm}$, $1.165\,\mathrm{eV}$) with high efficiency (higher than $50\,\%$) and a low background rate (below $7.7\cdot10^{-6}\,\mathrm{cps}$). To meet these requirements, we are investigating a tungsten Transition Edge Sensor (TES) provided by NIST, which operates in its superconducting transition region at millikelvin temperatures. This sensor exploits the drastic change in resistance caused by the absorption of a single photon. We find that the background observed in the setup with a fiber-coupled TES is consistent with Black Body Radiation (BBR) as the primary background contributor. A framework was developed to simulate BBR propagation to the TES under realistic conditions. The framework not only allows the exploration of background reduction strategies, such as improving the TES energy resolution, but also reproduces, within uncertainties, the spectral distribution of the observed background. These simulations have been validated with experimental data, in agreement with the modeled background distribution, and show that the improved energy resolution reduces the background rate in the $1064\,\mathrm{nm}$ signal region by one order of magnitude, to approximately $10^{-4}\,\mathrm{cps}$. However, this rate must be reduced further to meet the ALPS II requirements. △ Less

Submitted 13 May, 2025; originally announced May 2025.

Comments: 13 pages, 11 figures

Summary Report of the Physics Beyond Colliders Study at CERN

Authors: R. Alemany Fernández, M. Au, G. Arduini, L. Bandiera, D. Banerjee, H. Bartosik, J. Bernhard, D. Boer, J. Boyd, O. Brandt, M. Brugger, O. Buchmüller, F. Butin, S. Calatroni, C. Carli, N. Charitonidis, P. Crivelli, D. Curtin, R. T. D'Agnolo, G. De Lellis, O. Denisov, P. Di Nezza, B. Döbrich, Y. Dutheil, J. R. Ellis , et al. (57 additional authors not shown)

Abstract: The Physics Beyond Collider (PBC) Study Group was initially mandated by the CERN Management to prepare the previous European Particle Physics Strategy Update for CERN projects other than the high-energy frontier colliders. The main findings were summarized in an PBC Summary Report submitted to the Strategy Update. Following the Update process, the PBC Study Group was confirmed on a permanent basis… ▽ More The Physics Beyond Collider (PBC) Study Group was initially mandated by the CERN Management to prepare the previous European Particle Physics Strategy Update for CERN projects other than the high-energy frontier colliders. The main findings were summarized in an PBC Summary Report submitted to the Strategy Update. Following the Update process, the PBC Study Group was confirmed on a permanent basis with an updated mandate taking into account the strategy recommendations. The Study Group is now in charge of supporting the proponents of new ideas to address the technical issues and physics motivation of the projects ahead of their review by the CERN Scientific Committees and decision by the Management. The present document updates the previous PBC summary report to inform the new ongoing European Particle Physics Strategy Update process, taking into account the evolution of the CERN and worldwide landscapes and the new projects under consideration within the Study Group. △ Less

Submitted 1 May, 2025; originally announced May 2025.

Report number: CERN-PBC-REPORT-2025-003

Duals and time-reversed flows of generalized Ornstein-Uhlenbeck processes

Authors: Anita Behme, Henriette E. Heinrich, Alexander Lindner

Abstract: We derive explicit representations for the (Siegmund-) dual and the time-reversed flow of generalized Ornstein-Uhlenbeck processes whenever these exist. It turns out that the dual and the process corresponding to the reversed stochastic flow are again generalized Ornstein-Uhlenbeck processes. Further, we observe that the stationary distribution of the dual process provides information about the hi… ▽ More We derive explicit representations for the (Siegmund-) dual and the time-reversed flow of generalized Ornstein-Uhlenbeck processes whenever these exist. It turns out that the dual and the process corresponding to the reversed stochastic flow are again generalized Ornstein-Uhlenbeck processes. Further, we observe that the stationary distribution of the dual process provides information about the hitting time of zero of the original process. △ Less

Submitted 10 April, 2025; v1 submitted 7 April, 2025; originally announced April 2025.

Comments: 16 pages

MSC Class: 60G51; 60G10; 60H10

Enhancing European Cooperation in the Search for Dark Matter

Authors: Bernard Andrieu, Ties Behnke, Philip Bechtle, Xavier Bertou, Jose Busto, Susana Cebrian, Marco Cirelli, Laurent Derome, Cristinel Diaconu, Caterina Doglioni, Guiliana Fiorillo, Davide Franco, Juan Fuster, Romain Gaior, Erika Garutti, Claudio Gatti, B. Gimeno-Martinez, Frederic Girard, Roxanne Guenette, Matthias Hamer, Sophie Henrot-Versille, Thibaut Houdy, Fabrice Hubaut, Adrian Irles, Yoann Kermaidic , et al. (24 additional authors not shown)

Abstract: The search for dark matter is an exciting topic that is pursued in different communities over a wide range of masses and using a variety of experimental approaches. The result is a strongly correlated matrix of activities across Europe and beyond, both on the experimental and the theoretical side. We suggest to encourage and foster the collaboration of the involved institutions on technical, scien… ▽ More The search for dark matter is an exciting topic that is pursued in different communities over a wide range of masses and using a variety of experimental approaches. The result is a strongly correlated matrix of activities across Europe and beyond, both on the experimental and the theoretical side. We suggest to encourage and foster the collaboration of the involved institutions on technical, scientific and organisational level, in order to realise the synergies that are required to increase the impact of dark matter research and to cope with the increasing experiment sizes. The suggested network -- loosely titled "DMInfraNet" -- could be realised as a new initiative of the European strategy or be based on existing structures like iDMEu or DRD. The network can also serve as a nucleus for future joint funding proposals. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Comments: Input to the update of the European Strategy for Particle Physics, conceived as a living document. 12 pages

The International Axion Observatory (IAXO): case, status and plans. Input to the European Strategy for Particle Physics

Authors: A. Arcusa, S. Ahyoune, K. Altenmuller, I. Antolin, S. Basso, P. Brun, V. Burwitz, F. R. Candon, J. F. Castel, S. Cebrian, D. Chouhan, R. Della Ceca, M. Cervera-Cortes, M. M. Civitani, C. Cogollos, E. Costa, V. Cotroneo, T. Dafni, K. Desch, M. C. Diaz-Martin, A. Diaz-Morcillo, D. Diez-Ibanez, C. Diez Pardos, M. Dinter, B. Dobrich , et al. (98 additional authors not shown)

Abstract: The International Axion Observatory (IAXO) is a next-generation axion helioscope designed to search for solar axions with unprecedented sensitivity. IAXO holds a unique position in the global landscape of axion searches, as it will probe a region of the axion parameter space inaccessible to any other experiment. In particular, it will explore QCD axion models in the mass range from meV to eV, cove… ▽ More The International Axion Observatory (IAXO) is a next-generation axion helioscope designed to search for solar axions with unprecedented sensitivity. IAXO holds a unique position in the global landscape of axion searches, as it will probe a region of the axion parameter space inaccessible to any other experiment. In particular, it will explore QCD axion models in the mass range from meV to eV, covering scenarios motivated by astrophysical observations and potentially extending to axion dark matter models. Several studies in recent years have demonstrated that IAXO has the potential to probe a wide range of new physics beyond solar axions, including dark photons, chameleons, gravitational waves, and axions from nearby supernovae. IAXO will build upon the two-decade experience gained with CAST, the detailed studies for BabyIAXO, which is currently under construction, as well as new technologies. If, in contrast to expectations, solar axion searches with IAXO ``only'' result in limits on new physics in presently uncharted parameter territory, these exclusions would be very robust and provide significant constraints on models, as they would not depend on untestable cosmological assumptions. △ Less

Submitted 31 March, 2025; originally announced April 2025.

Comments: 10 pages, 2 figures. Input to the European Strategy for Particle Physics

Trustworthy Verification of RISC-V Binaries Using Symbolic Execution in HolBA

Authors: Karl Palmskog, Andreas Lindner, Scott Constable, Roberto Guanciale, Hamed Nemati

Abstract: Many types of formal verification establish properties about abstract high-level program representations, leaving a large gap to programs at runtime. Although gaps can sometimes be narrowed by techniques such as refinement, a verified program's trusted computing base may still include compilers and inlined assembly. In contrast, verification of binaries following an Instruction Set Architecture (I… ▽ More Many types of formal verification establish properties about abstract high-level program representations, leaving a large gap to programs at runtime. Although gaps can sometimes be narrowed by techniques such as refinement, a verified program's trusted computing base may still include compilers and inlined assembly. In contrast, verification of binaries following an Instruction Set Architecture (ISA) such as RISC-V can ensure that machine code behaves as expected on real hardware. While binary analysis is useful and sometimes even necessary for ensuring trustworthiness of software systems, existing tools do not have a formal foundation or lack automation for verification. We present a workflow and toolchain based on the HOL4 theorem prover and the HolBA binary analysis library for trustworthy formal verification of RISC-V binaries. The toolchain automates proofs of binary contracts by forward symbolic execution of programs in HolBA's intermediate language, BIR. We validated our toolchain by verifying correctness of RISC-V binaries with (1) an implementation of the ChaCha20 stream cipher and (2) hand-written assembly for context switching in an operating system kernel. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Comments: 12 pages, 7 figures, 1 table

Detecting Supernova Axions with IAXO

Authors: P. Carenza, J. A. García Pascual, M. Giannotti, I. G. Irastorza, M. Kaltschmidt, A. Lella, A. Lindner, G. Lucente, A. Mirizzi, M. J. Puyuelo

Abstract: We investigate the potential of IAXO and its intermediate version, BabyIAXO, to detect axions produced in core-collapse supernovae (SNe). Our study demonstrates that these experiments have realistic chances of identifying SN axions, offering crucial insights into both axion physics and SN dynamics. IAXO's sensitivity to SN axions allows for the exploration of regions of the axion parameter space i… ▽ More We investigate the potential of IAXO and its intermediate version, BabyIAXO, to detect axions produced in core-collapse supernovae (SNe). Our study demonstrates that these experiments have realistic chances of identifying SN axions, offering crucial insights into both axion physics and SN dynamics. IAXO's sensitivity to SN axions allows for the exploration of regions of the axion parameter space inaccessible through solar observations. In addition, in the event of a nearby SN, $d \sim O(100)$ pc, and sufficiently large axion couplings, $g_{a γ} \gtrsim 10^{-11} GeV^{-1}$, IAXO could have a chance to significantly advance our understanding of axion production in nuclear matter and provide valuable information about the physics of SNe, such as pion abundance, the equation of state, and other nuclear processes occurring in extreme environments. △ Less

Submitted 26 February, 2025; originally announced February 2025.

Comments: 20 pages, 9 figures, 5 tables

Active bacterial baths in droplets

Authors: Cristian Villalobos-Concha, Zhengyang Liu, Gabriel Ramos, Martyna Goral, Anke Lindner, Teresa López-León, Eric Clément, Rodrigo Soto, María Luisa Cordero

Abstract: Suspensions of self-propelled objects represent a novel paradigm in colloidal science. In such active baths traditional concepts, such as Brownian motion, fluctuation-dissipation relations, and work extraction from heat reservoirs, must be extended beyond the conventional framework of thermal baths. Unlike thermal baths, which are characterized by a single parameter, the temperature, the fundament… ▽ More Suspensions of self-propelled objects represent a novel paradigm in colloidal science. In such active baths traditional concepts, such as Brownian motion, fluctuation-dissipation relations, and work extraction from heat reservoirs, must be extended beyond the conventional framework of thermal baths. Unlike thermal baths, which are characterized by a single parameter, the temperature, the fundamental descriptors of an active bath remain elusive, especially in confined environments. In this study, buoyant, passive tracers are employed as generalized probes to investigate an active bath comprising motile bacteria confined within a droplet. We demonstrate that momentum transfer from the bath to the tracer can be effectively described as colored noise, characterized by temporal memory and an enhanced effective diffusivity significantly larger compared to thermal Brownian motion values. Using a stochastic analytical framework, we extract the temporal memory and diffusivity parameters that define such an active bath. Notably, the diffusivity scales linearly with bacterial concentration, modulated by a factor representing the role of confinement, expressed as the ratio of the confining radius to the probe radius. This finding, while still awaiting a complete theoretical explanation, offers new insights into the transport properties of confined active baths and paves the way for a deeper understanding of active emulsions driven by confined active matter. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Hopper flows of dense suspensions: a 2D microfluidic model system

Authors: Lars Kool, Jules Tampier, Philippe Bourrianne, Anke Lindner

Abstract: Flows of particles through bottlenecks are ubiquitous in nature and industry, involving both dry granular materials and suspensions. However, practical limitations of conventional experimental setups hinder the full understanding of these flows in confined geometries. Here, we present a microfluidic setup to investigate experimentally the flow of dense suspensions in a two-dimensional hopper chann… ▽ More Flows of particles through bottlenecks are ubiquitous in nature and industry, involving both dry granular materials and suspensions. However, practical limitations of conventional experimental setups hinder the full understanding of these flows in confined geometries. Here, we present a microfluidic setup to investigate experimentally the flow of dense suspensions in a two-dimensional hopper channel. Particles with controlled properties are in-situ fabricated with a photolithographic projection method and compacted at the channel constriction using a Quake valve. The setup is characterized by examining the flow of a dense suspension of hard, monodisperse disks through constrictions of varying widths. We demonstrate that the microfluidic hopper discharges particles at constant rate, resulting from the channel resistance being dominated by the presence of densely packed particles within the tapered section of the hopper. Under imposed flow rate the discharge remains independent of particle and orifice sizes, whereas it exhibits a Beverloo-like scaling under pressure-imposed conditions. Additionally, we show that the statistics of clog formation in our microfluidic hopper follow the same stochastic laws as reported in other systems. Finally, we show how the versatility of our microfluidic model system can be used to investigate the outflow and clogging of suspensions of more complex particles. △ Less

Submitted 17 January, 2025; originally announced January 2025.

Measuring the ATLAS ITk Pixel Detector Material via Multiple Scattering of Positrons at the CERN PS

Authors: Simon Florian Koch, Brian Moser, Antonín Lindner, Valerio Dao, Ignacio Asensi, Daniela Bortoletto, Marianne Brekkum, Florian Dachs, Hans Ludwig Joos, Milou van Rijnbach, Abhishek Sharma, Ismet Siral, Carlos Solans, Yingjie Wei

Abstract: The ITk is a new silicon tracker for the ATLAS experiment designed to increase detector resolution, readout capacity, and radiation hardness, in preparation for the larger number of simultaneous proton-proton interactions at the High Luminosity LHC. This paper presents the first direct measurement of the material budget of an ATLAS ITk pixel module, performed at a testbeam at the CERN Proton Synch… ▽ More The ITk is a new silicon tracker for the ATLAS experiment designed to increase detector resolution, readout capacity, and radiation hardness, in preparation for the larger number of simultaneous proton-proton interactions at the High Luminosity LHC. This paper presents the first direct measurement of the material budget of an ATLAS ITk pixel module, performed at a testbeam at the CERN Proton Synchrotron via the multiple scattering of low energy positrons within the module volume. Using a four plane telescope of thin monolithic pixel detectors from the MALTA collaboration, scattering datasets were recorded at a beam energy of $1.2\,\text{GeV}$. Kink angle distributions were extracted from tracks derived with and without information from the ITk pixel module, and were fit to extract the RMS scattering angle, which was converted to a fractional radiation length $x/X_0$. The average $x/X_0$ across the module was measured as $[0.89 \pm 0.01 \text{ (resolution)} \pm 0.01 \text{ (subtraction)} \pm 0.08 \text{ (beam momentum band)}]\%$, which agrees within uncertainties with an estimate of $0.88\%$ derived from material component expectations. △ Less

Submitted 5 December, 2024; originally announced December 2024.

Comments: 12 pages, 12 figures

Journal ref: Eur. Phys. J. C 85, 381 (2025)

The 2024 Motile Active Matter Roadmap

Authors: Gerhard Gompper, Howard A. Stone, Christina Kurzthaler, David Saintillan, Fernado Peruani, Dmitry A. Fedosov, Thorsten Auth, Cecile Cottin-Bizonne, Christophe Ybert, Eric Clement, Thierry Darnige, Anke Lindner, Raymond E. Goldstein, Benno Liebchen, Jack Binysh, Anton Souslov, Lucio Isa, Roberto di Leonardo, Giacomo Frangipane, Hongri Gu, Bradley J. Nelson, Fridtjof Brauns, M. Cristina Marchetti, Frank Cichos, Veit-Lorenz Heuthe , et al. (7 additional authors not shown)

Abstract: Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, hi… ▽ More Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, highly responsive, intelligent active materials. A major challenge for understanding and designing active matter is their inherent non-equilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Furthermore, interactions in ensembles of active agents are often non-additive and non-reciprocal. An important aspect of biological agents is their ability to sense the environment, process this information, and adjust their motion accordingly. It is an important goal for the engineering of micro-robotic systems to achieve similar functionality. With many fundamental properties of motile active matter now reasonably well understood and under control, the ground is prepared for the study of physical aspects and mechanisms of motion in complex environments, of the behavior of systems with new physical features like chirality, of the development of novel micromachines and microbots, of the emergent collective behavior and swarming of intelligent self-propelled particles, and of particular features of microbial systems. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter poses major challenges, which can only be addressed by a truly interdisciplinary effort involving scientists from biology, chemistry, ecology, engineering, mathematics, and physics. △ Less

Submitted 29 November, 2024; originally announced November 2024.

An accurate solar axions ray-tracing response of BabyIAXO

Authors: S. Ahyoune, K. Altenmueller, I. Antolin, S. Basso, P. Brun, F. R. Candon, J. F. Castel, S. Cebrian, D. Chouhan, R. Della Ceca, M. Cervera-Cortes, V. Chernov, M. M. Civitani, C. Cogollos, E. Costa, V. Cotroneo, T. Dafni, A. Derbin, K. Desch, M. C. Diaz-Martin, A. Diaz-Morcillo, D. Diez-Ibanez, C. Diez Pardos, M. Dinter, B. Doebrich , et al. (102 additional authors not shown)

Abstract: BabyIAXO is the intermediate stage of the International Axion Observatory (IAXO) to be hosted at DESY. Its primary goal is the detection of solar axions following the axion helioscope technique. Axions are converted into photons in a large magnet that is pointing to the sun. The resulting X-rays are focused by appropriate X-ray optics and detected by sensitive low-background detectors placed at th… ▽ More BabyIAXO is the intermediate stage of the International Axion Observatory (IAXO) to be hosted at DESY. Its primary goal is the detection of solar axions following the axion helioscope technique. Axions are converted into photons in a large magnet that is pointing to the sun. The resulting X-rays are focused by appropriate X-ray optics and detected by sensitive low-background detectors placed at the focal spot. The aim of this article is to provide an accurate quantitative description of the different components (such as the magnet, optics, and X-ray detectors) involved in the detection of axions. Our efforts have focused on developing robust and integrated software tools to model these helioscope components, enabling future assessments of modifications or upgrades to any part of the IAXO axion helioscope and evaluating the potential impact on the experiment's sensitivity. In this manuscript, we demonstrate the application of these tools by presenting a precise signal calculation and response analysis of BabyIAXO's sensitivity to the axion-photon coupling. Though focusing on the Primakoff solar flux component, our virtual helioscope model can be used to test different production mechanisms, allowing for direct comparisons within a unified framework. △ Less

Submitted 29 November, 2024; v1 submitted 21 November, 2024; originally announced November 2024.

Comments: 36 pages, 18 figures, 4 tables, Submitted to JHEP

First search for axion dark matter with a Madmax prototype

Authors: B. Ary dos Santos Garcia, D. Bergermann, A. Caldwell, V. Dabhi, C. Diaconu, J. Diehl, G. Dvali, J. Egge, E. Garutti, S. Heyminck, F. Hubaut, A. Ivanov, J. Jochum, S. Knirck, M. Kramer, D. Kreikemeyer-Lorenzo, C. Krieger, C. Lee, D. Leppla-Weber, X. Li, A. Lindner, B. Majorovits, J. P. A. Maldonado, A. Martini, A. Miyazaki , et al. (12 additional authors not shown)

Abstract: This paper presents the first search for dark matter axions with mass in the ranges 76.56 to 76.82 $μ$eV and 79.31 to 79.53 $μ$eV using a prototype setup for the MAgnetized Disk and Mirror Axion eXperiment (MADMAX). The experimental setup employs a dielectric haloscope consisting of three sapphire disks and a mirror to resonantly enhance the axion-induced microwave signal within the magnetic dipol… ▽ More This paper presents the first search for dark matter axions with mass in the ranges 76.56 to 76.82 $μ$eV and 79.31 to 79.53 $μ$eV using a prototype setup for the MAgnetized Disk and Mirror Axion eXperiment (MADMAX). The experimental setup employs a dielectric haloscope consisting of three sapphire disks and a mirror to resonantly enhance the axion-induced microwave signal within the magnetic dipole field provided by the 1.6 T Morpurgo magnet at CERN. Over 14.5 days of data collection, no axion signal was detected. A 95% CL upper limit on the axion-photon coupling strength down to $|g_{aγ}| \sim 2 \times 10^{-11} \mathrm{GeV}^{-1}$ is set in the targeted mass ranges, surpassing previous constraints, assuming a local axion dark matter density $ρ_{a}$ of $0.3~\mathrm{GeV}/\mathrm{cm}^3$. This study marks the first axion dark matter search using a dielectric haloscope. △ Less

Submitted 18 September, 2024; originally announced September 2024.

Design and Performance of the ALPS II Regeneration Cavity

Authors: Todd Kozlowski, Li-Wei Wei, Aaron D. Spector, Ayman Hallal, Henry Fraedrich, Daniel C. Brotherton, Isabella Oceano, Aldo Ejlli, Hartmut Grote, Harold Hollis, Kanioar Karan, Guido Mueller, D. B. Tanner, Benno Willke, Axel Lindner

Abstract: The Regeneration Cavity (RC) is a critical component of the Any Light Particle Search II (ALPS II) experiment. It increases the signal from possible axions and axion-like particles in the experiment by nearly four orders of magnitude. The total round-trip optical losses of the power circulating in the cavity must be minimized in order to maximize the resonant enhancement of the cavity, which is an… ▽ More The Regeneration Cavity (RC) is a critical component of the Any Light Particle Search II (ALPS II) experiment. It increases the signal from possible axions and axion-like particles in the experiment by nearly four orders of magnitude. The total round-trip optical losses of the power circulating in the cavity must be minimized in order to maximize the resonant enhancement of the cavity, which is an important figure of merit for ALPS II. Lower optical losses also increase the cavity storage time and with the 123 meter long ALPS II RC we have demonstrated the longest storage time of a two-mirror optical cavity. We measured a storage time of $7.17 \pm 0.01$ ms, equivalent to a linewidth of 44.4 Hz and a finesse of 27,500 at a wavelength of 1064 nm. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Comments: 16 pages, 8 figures, 1 table

First search for dark photon dark matter with a MADMAX prototype

Authors: J. Egge, D. Leppla-Weber, S. Knirck, B. Ary dos Santos Garcia, D. Bergermann, A. Caldwell, V. Dabhi, C. Diaconu, J. Diehl, G. Dvali, M. Ekmedžić, F. Gallo, E. Garutti, S. Heyminck, F. Hubaut, A. Ivanov, J. Jochum, P. Karst, M. Kramer, D. Kreikemeyer-Lorenzo, C. Krieger, C. Lee, A. Lindner, J. P. A. Maldonado, B. Majorovits , et al. (21 additional authors not shown)

Abstract: We report the first result from a dark photon dark matter search in the mass range from ${78.62}$ to $83.95~\mathrm{μeV}/c^2$ with a dielectric haloscope prototype for MADMAX (Magnetized Disc and Mirror Axion eXperiment). Putative dark photons would convert to observable photons within a stack consisting of three sapphire disks and a mirror. The emitted power of this system is received by an anten… ▽ More We report the first result from a dark photon dark matter search in the mass range from ${78.62}$ to $83.95~\mathrm{μeV}/c^2$ with a dielectric haloscope prototype for MADMAX (Magnetized Disc and Mirror Axion eXperiment). Putative dark photons would convert to observable photons within a stack consisting of three sapphire disks and a mirror. The emitted power of this system is received by an antenna and successively digitized using a low-noise receiver. No dark photon signal has been observed. Assuming unpolarized dark photon dark matter with a local density of $ρ_χ=0.3~\mathrm{GeV/cm^3}$ we exclude a dark photon to photon mixing parameter $χ> 2.7 \times 10^{-12}$ over the full mass range and $χ> 1.1 \times 10^{-13}$ at a mass of $80.57~\mathrm{μeV}/c^2$ with a 95\% confidence level. This is the first physics result from a MADMAX prototype and exceeds previous constraints on $χ$ in this mass range by up to almost three orders of magnitude. △ Less

Submitted 7 March, 2025; v1 submitted 5 August, 2024; originally announced August 2024.

Comments: v2 (Adapted to match published version. Fixed a mistake in the dark matter lineshape leading to a ~10% improvement in the limit)

First mechanical realization of a tunable dielectric haloscope for the MADMAX axion search experiment

Authors: The MADMAX Collaboration, B. Ary Dos Santos Garcia, D. Bergermann, A. Caldwell, V. Dabhi, C. Diaconu, J. Diehl, G. Dvali, J. Egge, M. Ekmedzic, F. Gallo, E. Garutti, S. Heyminck, F. Hubaut, A. Ivanov, J. Jochum, P. Karst, M. Kramer, D. Kreikemeyer-Lorenzo, C. Krieger, D. Leppla-Weber, A. Lindner, J. Maldonado, B. Majorovits, S. Martens , et al. (14 additional authors not shown)

Abstract: MADMAX, a future experiment to search for axion dark matter, is based on a novel detection concept called the dielectric haloscope. It consists of a booster composed of several dielectric disks positioned with $μ$m precision. A prototype composed of one movable disk was built to demonstrate the mechanical feasibility of such a booster in the challenging environment of the experiment: high magnetic… ▽ More MADMAX, a future experiment to search for axion dark matter, is based on a novel detection concept called the dielectric haloscope. It consists of a booster composed of several dielectric disks positioned with $μ$m precision. A prototype composed of one movable disk was built to demonstrate the mechanical feasibility of such a booster in the challenging environment of the experiment: high magnetic field to convert the axions into photons and cryogenic temperature to reduce the thermal noise. It was tested both inside a strong magnetic field up to 1.6 T and at cryogenic temperatures down to 35K. The measurements of the velocity and positioning accuracy of the disk are shown and are found to match the MADMAX requirements. △ Less

Submitted 11 November, 2024; v1 submitted 15 July, 2024; originally announced July 2024.

Comments: 14 pages, 9 figures

Journal ref: JINST 19 T11002 (2024)

Simulations for direct dark matter searches using ALPS II's TES detection system

Authors: Christina Schwemmbauer, Yonit Hochberg, Katharina-Sophie Isleif, Friederike Januschek, Benjamin V. Lehmann, Axel Lindner, Manuel Meyer, Gulden Othman, José Alejandro Rubiera Gimeno

Abstract: Transition Edge Sensors (TES) are superconducting microcalorimeters that can be used for single-photon detection with extremely low backgrounds. When they are within their superconducting transition region, small temperature fluctuations - like the energy deposited by single photons - lead to large resistance variations. These variations can be measured using Superconducting Quantum Interference D… ▽ More Transition Edge Sensors (TES) are superconducting microcalorimeters that can be used for single-photon detection with extremely low backgrounds. When they are within their superconducting transition region, small temperature fluctuations - like the energy deposited by single photons - lead to large resistance variations. These variations can be measured using Superconducting Quantum Interference Devices (SQUIDs). This technology is planned to be used as a single-photon detector for later runs of the ALPS II experiment, a light-shining-through-walls experiment at DESY Hamburg, searching for Axion-Like Particles (ALPs), which are possible Dark Matter (DM) candidates. Due to the very low dark count rates in our setup, our TES system might be viable for direct DM searches at sub-MeV masses through electron-scattering of DM in the superconducting chip, as well. Simulations concerning background rejection and calibration methods demonstrate the needed sub-eV sensitivity already. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Color-switching hydrogels as integrated microfluidic pressure sensors

Authors: Lucie Ducloué, Md. Anamul Haque, Martyna Goral, Muhammad Ilyas, Jian Ping Gong, Anke Lindner

Abstract: Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we demonstrate a fully integrated multiplexed optofluidic pressure sensor, entirely decoupled from the flow path, that enables local pressure measurements along a… ▽ More Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we demonstrate a fully integrated multiplexed optofluidic pressure sensor, entirely decoupled from the flow path, that enables local pressure measurements along any microfluidic channel without altering its flow geometry. The sensor itself relies on the compression of a soft mechano-actuated hydrogel, changing color in response to a pressure change. The hydrogel is separated from the fluid circulating in the channel by a thin membrane, allowing for the unrestricted use of different types of fluids. Imaging the gel through the transparent PDMS with a color camera provides a direct, easy, and contact-free determination of the fluid pressure at the sensing location for pressures as small as \SI{20}{\milli\bar} with a resolution of around \SI{10}{\milli\bar}. The sensitivity and accessible pressure range can be tuned via the mechanical properties \RE{of the sensing unit}. The photonic gel can also be used to acquire 2D pressure or deformation maps, taking advantage of the fast response time and fine spatial resolution. △ Less

Submitted 3 March, 2024; originally announced March 2024.

Measurement of the thermal accommodation coefficient of helium on a crystalline silicon surface at low-temperatures

Authors: Alexander Franke, Nils Sültmann, Christoph Reinhardt, Sandy Croatto, Jörn Schaffran, Hossein Masalehdan, Axel Lindner, Roman Schnabel

Abstract: Next-generation gravitational wave observatories are expected to use cryogenically cooled, pendulum-suspended 200 kg test mass mirrors from a crystalline material such as crystalline silicon. During operation of the observatories, these mirrors undergo heating due to the absorption of laser radiation of up to a watt. Low noise cooling techniques need to be developed. Low-pressure helium exchange g… ▽ More Next-generation gravitational wave observatories are expected to use cryogenically cooled, pendulum-suspended 200 kg test mass mirrors from a crystalline material such as crystalline silicon. During operation of the observatories, these mirrors undergo heating due to the absorption of laser radiation of up to a watt. Low noise cooling techniques need to be developed. Low-pressure helium exchange gas at 5 K might contribute to the challenging task. Here, we report the measurement of the helium accommodation coefficient $α(11\,\mathrm{K}<T< 30\,\mathrm{K})$, which is the probability that a helium atom thermalises with a surface at a given temperature, when reflected from it. We find $α(T) > 0.7$ for temperatures < 20 K, which increases the cooling power compared to recently used assumptions. The idea of free molecular flow helium gas cooling is thus supported and might find application in some observatory concepts. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Comments: 12 pages, 5 figures

Beyond Over-Protection: A Targeted Approach to Spectre Mitigation and Performance Optimization

Authors: Tiziano Marinaro, Pablo Buiras, Andreas Lindner, Roberto Guanciale, Hamed Nemati

Abstract: Since the advent of Spectre attacks, researchers and practitioners have developed a range of hardware and software measures to counter transient execution attacks. A prime example of such mitigation is speculative load hardening in LLVM, which protects against leaks by tracking the speculation state and masking values during misspeculation. LLVM relies on static analysis to harden programs using s… ▽ More Since the advent of Spectre attacks, researchers and practitioners have developed a range of hardware and software measures to counter transient execution attacks. A prime example of such mitigation is speculative load hardening in LLVM, which protects against leaks by tracking the speculation state and masking values during misspeculation. LLVM relies on static analysis to harden programs using slh that often results in over-protection, which incurs performance overhead. We extended an existing side-channel model validation framework, Scam-V, to check the vulnerability of programs to Spectre-PHT attacks and optimize the protection of programs using the slh approach. We illustrate the efficacy of Scam-V by first demonstrating that it can automatically identify Spectre vulnerabilities in real programs, e.g., fragments of crypto-libraries. We then develop an optimization mechanism that validates the necessity of slh hardening w.r.t. the target platform. Our experiments showed that hardening introduced by LLVM in most cases could be significantly improved when the underlying microarchitecture properties are considered. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: The paper will appear in ACM AsiaCCS 2024

Dynamics of rigid fibers interacting with triangular obstacles in microchannel flows

Authors: Zhibo Li, Clément Bielinski, Anke Lindner, Olivia du Roure, Blaise Delmotte

Abstract: Fiber suspensions flowing in structured media are encountered in many biological and industrial systems. Interactions between fibers and the transporting flow as well as fiber contact with obstacles can lead to complex dynamics. In this work, we combine microfluidic experiments and numerical simulations to study the interactions of a rigid fiber with an individual equilateral triangular pillar in… ▽ More Fiber suspensions flowing in structured media are encountered in many biological and industrial systems. Interactions between fibers and the transporting flow as well as fiber contact with obstacles can lead to complex dynamics. In this work, we combine microfluidic experiments and numerical simulations to study the interactions of a rigid fiber with an individual equilateral triangular pillar in a microfluidic channel. Four dominant fiber dynamics are identified: transport above or below the obstacle, pole vaulting and trapping, in excellent agreement between experiments and modeling. The dynamics are classified as a function of the length, angle and lateral position of the fibers at the channel entry. We show that the orientation and lateral position close to the obstacle are responsible for the fiber dynamics and we link those to the initial conditions of the fibers at the channel entrance. Direct contact between the fibers and the pillar is required to obtain strong modification of the fiber trajectories, which is associated to irreversible dynamics. Longer fibers are found to be more laterally shifted by the pillar than shorter fibers that rather tend to remain on their initial streamline. Our findings could in the future be used to design and optimize microfluidic sorting devices to sort rigid fibers by length. △ Less

Submitted 5 March, 2024; v1 submitted 29 November, 2023; originally announced November 2023.

Comments: Supplementary videos and their captions are attached in the ancillary files. You can download them

Spin-orbit interaction driven terahertz nonlinear dynamics in transition metals

Authors: Ruslan Salikhov, Markus Lysne, Philipp Werner, Igor Ilyakov, Michael Schüler, Thales V. A. G. de Oliveira, Alexey Ponomaryov, Atiqa Arshad, Gulloo Lal Prajapati, Jan-Christoph Deinert, Pavlo Makushko, Denys Makarov, Thomas Cowan, Jürgen Fassbender, Jürgen Lindner, Aleksandra Lindner, Carmine Ortix, Sergey Kovalev

Abstract: The interplay of electric charge, spin, and orbital polarizations, coherently driven by picosecond long oscillations of light fields in spin-orbit coupled systems, is the foundation of emerging terahertz spintronics and orbitronics. The essential rules for how terahertz light interacts with these systems in a nonlinear way are still not understood. In this work, we demonstrate a universally applic… ▽ More The interplay of electric charge, spin, and orbital polarizations, coherently driven by picosecond long oscillations of light fields in spin-orbit coupled systems, is the foundation of emerging terahertz spintronics and orbitronics. The essential rules for how terahertz light interacts with these systems in a nonlinear way are still not understood. In this work, we demonstrate a universally applicable electronic nonlinearity originating from spin-orbit interactions in conducting materials, wherein the interplay of light-induced spin and orbital textures manifests. We utilized terahertz harmonic generation spectroscopy to investigate the nonlinear dynamics over picosecond timescales in various transition metal films. We found that the terahertz harmonic generation efficiency scales with the spin Hall conductivity in the studied films, while the phase takes two possible values (shifted by π), depending on the d-shell filling. These findings elucidate the fundamental mechanisms governing non-equilibrium spin and orbital polarization dynamics at terahertz frequencies, which is relevant for potential applications of terahertz spin- and orbital-based devices. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 11 pages, 4 figures

Self-calibrating gas pressure sensor with a 10-decade measurement range

Authors: Christoph Reinhardt, Hossein Masalehdan, Sandy Croatto, Alexander Franke, Moritz B. K. Kunze, Jörn Schaffran, Nils Sültmann, Axel Lindner, Roman Schnabel

Abstract: Recent years have seen a rapid reduction in the intrinsic loss of nanomechanical resonators (i.e., chip-scale mechanical oscillators). As a result, these devices become increasingly sensitive to the friction exerted by smallest amounts of gas. Here, we present the pressure-dependency of a nanomechanical trampoline resonator's quality factor $Q$ over ten decades, from $10^{-7}$ to… ▽ More Recent years have seen a rapid reduction in the intrinsic loss of nanomechanical resonators (i.e., chip-scale mechanical oscillators). As a result, these devices become increasingly sensitive to the friction exerted by smallest amounts of gas. Here, we present the pressure-dependency of a nanomechanical trampoline resonator's quality factor $Q$ over ten decades, from $10^{-7}$ to $10^{3}\,\mathrm{mbar}$. We find that the measured behavior is well-described by a model combining analytical and numerical components for molecular and viscous flow, respectively. This model relies exclusively on design and typical material parameters, together with measured values of intrinsic resonance frequency $f_\mathrm{in}$ and quality factor $Q_\mathrm{in}$. Measuring $f_\mathrm{in}$ and $Q_\mathrm{in}$ at a pressure $<\!10^{-7}\,\mathrm{mbar}$ self-calibrates our sensor over its entire measurement range. For a trampoline's fundamental out-of-plane vibrational mode, the resulting deviation between measured and simulated pressure dependencies of the quality factor and resonance frequency is within $15\,\%$ and $4\,\%$, respectively. The resulting error for pressure values inferred from quality factor and frequency measurements is $<10\,\%$, for pressures between $\sim 10^{-6}$ and $\sim 10^{-1}\,\mathrm{mbar}$, and $<25\,\%$ for the complete 10-decade measurement range. Exceptions are two outliers with increased measurement errors, which might be related to the limited accuracy of our commercial pressure gauge. Based on investigations with helium, we demonstrate the potential for extending this sensing capability to other gases, thereby highlighting the practical use of our sensor. △ Less

Submitted 16 February, 2024; v1 submitted 21 September, 2023; originally announced September 2023.

Journal ref: ACS Photonics 2024

Qualification of piezo-electric actuators for the MADMAX booster system at cryogenic temperatures and high magnetic fields

Authors: E. Garutti, H. Janssen, D. Kreikemeyer-Lorenzo, C. Krieger, A. Lindner, B. Majorovits, J. Schaffran, B. van Bree

Abstract: We report on the qualification of a piezo-based linear stage for the manipulation of positions of dielectric discs in the booster of the MADMAX axion dark matter search experiment. A first demonstrator of the piezo drives, specifically developed for MADMAX, was tested at room temperature as well as at cryogenic temperatures down to 4.5 K and inside strong magnetic fields up to 5.3 T. These qualifi… ▽ More We report on the qualification of a piezo-based linear stage for the manipulation of positions of dielectric discs in the booster of the MADMAX axion dark matter search experiment. A first demonstrator of the piezo drives, specifically developed for MADMAX, was tested at room temperature as well as at cryogenic temperatures down to 4.5 K and inside strong magnetic fields up to 5.3 T. These qualification measurements prove that the piezo-based linear stage is suited for MADMAX and fulfills the requirements. △ Less

Submitted 7 July, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Comments: 13 pages, 9 figures, 2 tables

Journal ref: JINST 18 P08011 (2023)

Feebly Interacting Particles: FIPs 2022 workshop report

Authors: C. Antel, M. Battaglieri, J. Beacham, C. Boehm, O. Buchmüller, F. Calore, P. Carenza, B. Chauhan, P. Cladè, P. Coloma, P. Crivelli, V. Dandoy, L. Darmé, B. Dey, F. F. Deppisch, A. De Roeck, M. Drewes, B. Echenard, V. V. Flambaum, P. Foldenauer, C. Gatti, M. Giannotti, A. Golutvin, M. C. Gonzalez-Garcia, S. Gori , et al. (53 additional authors not shown)

Abstract: Particle physics today faces the challenge of explaining the mystery of dark matter, the origin of matter over anti-matter in the Universe, the origin of the neutrino masses, the apparent fine-tuning of the electro-weak scale, and many other aspects of fundamental physics. Perhaps the most striking frontier to emerge in the search for answers involves new physics at mass scales comparable to famil… ▽ More Particle physics today faces the challenge of explaining the mystery of dark matter, the origin of matter over anti-matter in the Universe, the origin of the neutrino masses, the apparent fine-tuning of the electro-weak scale, and many other aspects of fundamental physics. Perhaps the most striking frontier to emerge in the search for answers involves new physics at mass scales comparable to familiar matter, below the GeV-scale, or even radically below, down to sub-eV scales, and with very feeble interaction strength. New theoretical ideas to address dark matter and other fundamental questions predict such feebly interacting particles (FIPs) at these scales, and indeed, existing data provide numerous hints for such possibility. A vibrant experimental program to discover such physics is under way, guided by a systematic theoretical approach firmly grounded on the underlying principles of the Standard Model. This document represents the report of the FIPs 2022 workshop, held at CERN between the 17 and 21 October 2022 and aims to give an overview of these efforts, their motivations, and the decadal goals that animate the community involved in the search for FIPs. △ Less

Submitted 2 May, 2023; originally announced May 2023.

Comments: 383 pp, 176 figures

Report number: CERN-TH-2023-061 DESY-23-050 FERMILAB-PUB-23-149-PPD INFN-23-14-LNF JLAB-PHY-23-3789 LA-UR-23-21432 MITP-23-015

Proof-Producing Symbolic Execution for Binary Code Verification

Authors: Andreas Lindner, Roberto Guanciale, Mads Dam

Abstract: We propose a proof-producing symbolic execution for verification of machine-level programs. The analysis is based on a set of core inference rules that are designed to give control over the tradeoff between preservation of precision and the introduction of overapproximation to make the application to real world code useful and tractable. We integrate our symbolic execution in a binary analysis pla… ▽ More We propose a proof-producing symbolic execution for verification of machine-level programs. The analysis is based on a set of core inference rules that are designed to give control over the tradeoff between preservation of precision and the introduction of overapproximation to make the application to real world code useful and tractable. We integrate our symbolic execution in a binary analysis platform that features a low-level intermediate language enabling the application of analyses to many different processor architectures. The overall framework is implemented in the theorem prover HOL4 to be able to obtain highly trustworthy verification results. We demonstrate our approach to establish sound execution time bounds for a control loop program implemented for an ARM Cortex-M0 processor. △ Less

Submitted 18 April, 2023; originally announced April 2023.

A first application of machine and deep learning for background rejection in the ALPS II TES detector

Authors: Manuel Meyer, Katharina Isleif, Friederike Januschek, Axel Lindner, Gulden Othman, Jose Alejandro Rubiera Gimeno, Christina Schwemmbauer, Matthias Schott, Rikhav Shah

Abstract: Axions and axion-like particles are hypothetical particles predicted in extensions of the standard model and are promising cold dark matter candidates. The Any Light Particle Search (ALPS II) experiment is a light-shining-through-the-wall experiment that aims to produce these particles from a strong light source and magnetic field and subsequently detect them through a reconversion into photons. W… ▽ More Axions and axion-like particles are hypothetical particles predicted in extensions of the standard model and are promising cold dark matter candidates. The Any Light Particle Search (ALPS II) experiment is a light-shining-through-the-wall experiment that aims to produce these particles from a strong light source and magnetic field and subsequently detect them through a reconversion into photons. With an expected rate $\sim$ 1 photon per day, a sensitive detection scheme needs to be employed and characterized. One foreseen detector is based on a transition edge sensor (TES). Here, we investigate machine and deep learning algorithms for the rejection of background events recorded with the TES. We also present a first application of convolutional neural networks to classify time series data measured with the TES. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 11 pages, 5 figures, accepted for publication in Annals of Physics. Contribution to the Patras 2022 Workshop on Axions, WIMPs, and WISPs

Journal ref: Annalen der Physik 2023, 2200545

The DESY axion search program

Authors: Daniel Heuchel, Axel Lindner, Isabella Oceano

Abstract: Feebly Interacting Particles (FIPs) might offer the solution to (some of) the open questions beyond the Standard Models of particle physics and cosmology. At DESY in Hamburg, three non-accelerator-based experiments will search for FIPs as dark matter candidates (ALPS II, BabyIAXO) or constituting the dark matter in our home galaxy (MADMAX). Feebly Interacting Particles (FIPs) might offer the solution to (some of) the open questions beyond the Standard Models of particle physics and cosmology. At DESY in Hamburg, three non-accelerator-based experiments will search for FIPs as dark matter candidates (ALPS II, BabyIAXO) or constituting the dark matter in our home galaxy (MADMAX). △ Less

Submitted 23 February, 2023; originally announced February 2023.

Comments: 7 pages, 5 figures, contribution to a conference proceedings, FIPs 2022 Workshop on Feebly-Interacting-Particles, FIPs2022, CERN, Switzerland, 17 Oct 2022 - 21 Oct 2022

Report number: DESY-23-023, PUBDB-2023-00809

Asymmetric bistability of chiral particle orientation in viscous shear flows

Authors: Andreas Zöttl, Francesca Tesser, Daiki Matsunaga, Justine Laurent, Olivia Du Roure, Anke Lindner

Abstract: The migration of helical particles in viscous shear flows plays a crucial role in chiral particle sorting. Attaching a non-chiral head to a helical particle leads to a rheotactic torque inducing particle reorientation. This phenomenon is responsible for bacterial rheotaxis observed for flagellated bacteria as Escherichia coli in shear flows. Here we use a high-resolution microprinting technique to… ▽ More The migration of helical particles in viscous shear flows plays a crucial role in chiral particle sorting. Attaching a non-chiral head to a helical particle leads to a rheotactic torque inducing particle reorientation. This phenomenon is responsible for bacterial rheotaxis observed for flagellated bacteria as Escherichia coli in shear flows. Here we use a high-resolution microprinting technique to fabricate micro-particles with controlled and tunable chiral shape consisting of a spherical head and helical tails of various pitch and handedness. By observing the fully time-resolved dynamics of these micro-particles in microfluidic channel flow, we gain valuable insights into chirality-induced orientation dynamics. Our experimental model system allows us to examine the effects of particle elongation, chirality, and head-heaviness for different flow rates on the orientation dynamics, while minimizing the influence of Brownian noise. Through our model experiments we demonstrate the existence of asymmetric bistability of the particle orientation perpendicular to the flow direction. We quantitatively explain the particle equilibrium orientations as a function of particle properties, initial conditions and flow rates, as well as the time-dependence of the reorientation dynamics through a theoretical model. The model parameters are determined using boundary element simulations and excellent agreement with experiments is obtained without any adjustable parameters. Our findings lead to a better understanding of chiral particle transport, bacterial rheotaxis and might allow the development of targeted delivery applications. △ Less

Submitted 17 October, 2023; v1 submitted 16 November, 2022; originally announced November 2022.

Comments: 14 pages, 5+9 figures; accepted for publication in PNAS

Pitch Controls the Flexibility of Helical Ribbons

Authors: Lucas Prévost, Anke Lindner, Olivia du Roure

Abstract: Helical objects are often implemented in electronic or mechanical micro-systems, requiring a precise understanding of their mechanical properties. While helices formed by cylindrical filaments have been intensely investigated, little is known about the role of the cross-section of the filament at the basis of the helical shape. We study experimentally the force-extension response of micro-helices… ▽ More Helical objects are often implemented in electronic or mechanical micro-systems, requiring a precise understanding of their mechanical properties. While helices formed by cylindrical filaments have been intensely investigated, little is known about the role of the cross-section of the filament at the basis of the helical shape. We study experimentally the force-extension response of micro-helices fabricated from ultra-thin PMMA ribbons. Leveraging newly achieved control on the helix geometry, the influence of the helical pitch is quantified and a significant stiffening of the helical ribbons with increasing pitch is highlighted. Two phenomena are identified: a mechanical transition from a regime dominated by twisting of the ribbon at small pitch to a bending-dominated regime at high pitch and a purely geometrical effect, specific to helical ribbons. Excellent agreement is found with a previously established analytical model of inextensible elastic strips. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Frustrated run and tumble of swimming E-coli bacteria in nematic liquid crystals

Authors: Martyna Goral, Eric Clement, Thierry Darnige, Teresa Lopez-Leon, Anke Lindner

Abstract: In many situations bacteria move in complex environments, as for example in soils, oceans or the human gut-track microbiome. In these natural environments, carrier fluids such as mucus or reproductive fluids show complex structure associated with non-Newtonian rheology. Many fundamental questions concerning the the ability to navigate in such environments remain unsolved due to the inherent comple… ▽ More In many situations bacteria move in complex environments, as for example in soils, oceans or the human gut-track microbiome. In these natural environments, carrier fluids such as mucus or reproductive fluids show complex structure associated with non-Newtonian rheology. Many fundamental questions concerning the the ability to navigate in such environments remain unsolved due to the inherent complexity of the natural surroundings. Recently, the interaction of swimming bacteria with nematic liquid crystals has attracted lot of attention. In these structured fluids, the kinetics of bacterial motion is constrained by the orientational molecular order of the liquid crystal (or director field) and novel spatio-temporal patterns arise from this orientational constraint, as well as from the interactions with topological defects. A question unaddressed so far is how bacteria are able to change swimming direction in such an environment. In this work, we study the swimming mechanism of a single bacterium, E. coli, constrained to move along the director field of a lyotropic chromonic liquid crystal (LCLC) that is confined to a planar cell. In such an environment, the spontaneous run and tumble motion of the bacterium gets frustrated: the elasticity of the liquid crystal prevents flagella from unbundling. Interestingly, in order to change direction, bacteria execute a reversal motion along the director field, driven by the relocation of a single flagellum to the other side of the bacterial body, coined as a frustrated tumble. We present a detailed experimental characterization of this phenomenon, exploiting exceptional spatial and temporal resolution of bacteria and flagella dynamics during swimming, obtained using a two color Lagrangian tracking technique. We suggest a possible mechanism behind the frustrated run and tumble motion, accounting for these observations. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Dynamics of flexible filaments in oscillatory shear flows

Authors: Francesco Bonacci, Brato Chakrabarti, David Saintillan, Olivia du Roure, Anke Lindner

Abstract: The fluid-structure interactions between flexible fibers and viscous flows play an essential role in various biological phenomena, medical problems, and industrial processes. Of particular interest is the case of particles freely transported in time-dependent flows. This work elucidates the dynamics and morphologies of actin filaments under oscillatory shear flows by combining microfluidic experim… ▽ More The fluid-structure interactions between flexible fibers and viscous flows play an essential role in various biological phenomena, medical problems, and industrial processes. Of particular interest is the case of particles freely transported in time-dependent flows. This work elucidates the dynamics and morphologies of actin filaments under oscillatory shear flows by combining microfluidic experiments, numerical simulations, and theoretical modeling. Our work reveals that, in contrast to steady shear flows, in which small orientational fluctuations from a flow-aligned state initiate tumbling and deformations, the periodic flow reversal allows the filament to explore many different configurations at the beginning of each cycle. Investigation of filament motion during half time periods of oscillation highlights the critical role of the initial filament orientation on the emergent dynamics. This strong coupling between orientation and deformation results in new deformation regimes and novel higher-order buckling modes absent in steady shear flows. The primary outcome of our analysis is the possibility of suppression of buckling instabilities for certain combinations of the oscillation frequency and initial filament orientation, even in very strong flows. We explain this unusual behavior through a weakly nonlinear Landau theory of buckling, in which we treat the filaments as inextensible Brownian Euler-Bernoulli rods whose hydrodynamics are described by local slender-body theory. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Comments: 18 pages, 9 figures

Shaping Nanoscale Ribbons into Micro-Helices of Controllable Radius and Pitch

Authors: Lucas Prévost, Dylan M. Barber, Marine Daïeff, Jonathan T. Pham, Alfred J. Crosby, Todd Emrick, Olivia du Roure, Anke Lindner

Abstract: We report fabrication of highly flexible micron-sized helices from nanometer-thick ribbons. Building upon the helical coiling of such ultra-thin ribbons mediated by surface tension, we demonstrate that the enhanced creep properties of highly confined materials can be leveraged to shape helices into the desired geometry with full control of the final shape. The helical radius, total length and pitc… ▽ More We report fabrication of highly flexible micron-sized helices from nanometer-thick ribbons. Building upon the helical coiling of such ultra-thin ribbons mediated by surface tension, we demonstrate that the enhanced creep properties of highly confined materials can be leveraged to shape helices into the desired geometry with full control of the final shape. The helical radius, total length and pitch angle are all freely and independently tunable within a wide range: radius within $\sim$ 1-100 micrometer, length within $\sim$ 100-3000 micrometer, and pitch angle within $\sim$ 0-70°. This fabrication method is validated for three different materials: poly(methyl methacrylate), poly(dimethylaminoethyl methacrylate), and transition metal chalcogenide quantum dots, each corresponding to a different solid-phase structure: respectively a polymer glass, a crosslinked hydrogel, and a nanoparticle array. This demonstrates excellent versatility with respect to material selection, enabling further control of the helix mechanical properties. △ Less

Submitted 24 June, 2022; v1 submitted 1 March, 2022; originally announced March 2022.

HEWES: Heisenberg-Euler Weak-Field Expansion Simulator

Authors: Andreas Lindner, Baris Ölmez, Hartmut Ruhl

Abstract: Vacuum polarization, a key prediction of quantum theory, can cause a variety of intriguing phenomena that can be triggered by high-intensity laser pulses. The Heisenberg-Euler theory of the quantum vacuum supplements Maxwell's theory of electromagnetism with nonlinear photon-photon interactions mediated by vacuum fluctuations. This work presents a numerical solver for the leading weak-field Heisen… ▽ More Vacuum polarization, a key prediction of quantum theory, can cause a variety of intriguing phenomena that can be triggered by high-intensity laser pulses. The Heisenberg-Euler theory of the quantum vacuum supplements Maxwell's theory of electromagnetism with nonlinear photon-photon interactions mediated by vacuum fluctuations. This work presents a numerical solver for the leading weak-field Heisenberg-Euler corrections. The present code implementation reaches an accuracy of order thirteen in the numerical scheme and takes into account up to six-photon interactions. Since theoretical approaches are limited to approximations and the experimental requirements for signal detection are high, the need for support from the numerical side is apparent. △ Less

Submitted 25 February, 2023; v1 submitted 19 February, 2022; originally announced February 2022.

Comments: 7 pages, 6 figures; journal version

Journal ref: Software Impacts 15C (2023) 100481

Matching to Higgs-Compositeness and Renormalization of the Higgs-Electroweak Chiral Lagrangian extended by a Scalar Singlet

Authors: Andreas Lindner, Khoirul Faiq Muzakka

Abstract: We match the electroweak chiral Lagrangian with two singlet scalars to the next-to-minimal composite Higgs model with $ SO(6)/SO(5) $ coset structure and extract the scalar divergences to one loop. Assuming the additional scalar to be heavy, we integrate it out and perform a matching to the well-established electroweak chiral Lagrangian with one light Higgs. We match the electroweak chiral Lagrangian with two singlet scalars to the next-to-minimal composite Higgs model with $ SO(6)/SO(5) $ coset structure and extract the scalar divergences to one loop. Assuming the additional scalar to be heavy, we integrate it out and perform a matching to the well-established electroweak chiral Lagrangian with one light Higgs. △ Less

Submitted 17 April, 2022; v1 submitted 13 January, 2022; originally announced January 2022.

Comments: 29 pages; added references

One-Loop Renormalization of the Higgs Sector of the Electroweak Chiral Lagrangian extended by N Scalar Singlets

Authors: Andreas Lindner, Khoirul Faiq Muzakka

Abstract: The framework of the electroweak chiral Lagrangian with a light Higgs is extended by an additional scalar and then generalized to N scalars in the Higgs sector. Divergences from scalar fluctuations are renormalized up to one loop using the background field method. The results are crosschecked against the case of one scalar. A subset of the divergences is demonstrated and crosschecked diagrammatica… ▽ More The framework of the electroweak chiral Lagrangian with a light Higgs is extended by an additional scalar and then generalized to N scalars in the Higgs sector. Divergences from scalar fluctuations are renormalized up to one loop using the background field method. The results are crosschecked against the case of one scalar. A subset of the divergences is demonstrated and crosschecked diagrammatically. Together with the complete one-loop renormalization of the electroweak chiral theory with one light Higgs conducted previously, this constitutes a renormalization framework of any pure scalar extension to the electroweak chiral theory. △ Less

Submitted 17 April, 2022; v1 submitted 12 January, 2022; originally announced January 2022.

Comments: 20 pages; added references

Geometrical scaling for light flavor hadrons

Authors: A. Lindner, M. Petrovici, A. Pop

Abstract: As it is well known by now, the pre-partonic phase in hadron collisions is successfully described by the Color Glass Condensate (CGC) approach. Previous studies, based on experimental data obtained on a wide range of energies at the Relativistic Heavy Ion Collider (RHIC) and at the Large Hadron Collider (LHC) for $π^+$, $K^+$ and $p$, evidenced that observables related to the dynamics of the colli… ▽ More As it is well known by now, the pre-partonic phase in hadron collisions is successfully described by the Color Glass Condensate (CGC) approach. Previous studies, based on experimental data obtained on a wide range of energies at the Relativistic Heavy Ion Collider (RHIC) and at the Large Hadron Collider (LHC) for $π^+$, $K^+$ and $p$, evidenced that observables related to the dynamics of the collision, i.e. the mean transverse momentum ($\langle p_T \rangle$), the slope of the $\langle p_T \rangle$ dependence on the mass of the hadrons and the average transverse flow velocity obtained from the simultaneous fits of the $p_T$ spectra of the particles with the Boltzmann-Gibbs Blast Wave (BGBW) expression, scale rather well as a function of the square root of the ratio of the particle density over unit of rapidity to the overlapping area of the colliding nuclei ($\sqrt{(dN/dy)/S_\perp}$), the relevant scale in the gluon saturation picture. Results of a similar study extended to strange and multi-strange hadrons, for both proton-proton (\textit{pp}) and heavy-ion (\textit{A-A}) collision systems are presented in the present paper. The similarities and differences in the behaviour of strange hadrons relative to non-strange hadrons are discussed. △ Less

Submitted 16 November, 2021; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: PANIC 2021 PoS(PANIC2021)197

Probing the axion-nucleon coupling with the next generation of axion helioscopes

Authors: Luca Di Luzio, Javier Galan, Maurizio Giannotti, Igor G. Irastorza, Joerg Jaeckel, Axel Lindner, Jaime Ruz, Uwe Schneekloth, Lukas Sohl, Lennert J. Thormaehlen, Julia K. Vogel

Abstract: A finite axion-nucleon coupling, nearly unavoidable for QCD axions, leads to the production of axions via the thermal excitation and subsequent de-excitation of Fe-57 isotopes in the sun. We revise the solar bound on this flux adopting the up to date emission rate, and investigate the sensitivity of the proposed International Axion Observatory IAXO and its intermediate stage BabyIAXO to detect the… ▽ More A finite axion-nucleon coupling, nearly unavoidable for QCD axions, leads to the production of axions via the thermal excitation and subsequent de-excitation of Fe-57 isotopes in the sun. We revise the solar bound on this flux adopting the up to date emission rate, and investigate the sensitivity of the proposed International Axion Observatory IAXO and its intermediate stage BabyIAXO to detect these axions. We compare different realistic experimental options and discuss the model dependence of the signal. Already BabyIAXO has sensitivity far beyond previous solar axion searches via the nucleon coupling and IAXO can improve on this by more than an order of magnitude. △ Less

Submitted 9 February, 2022; v1 submitted 11 November, 2021; originally announced November 2021.

Comments: 17 pages, 4 figures, 2 tables. Minor revisions and corrections of a few typos. Matches published version

Journal ref: Eur. Phys. J. C 82, 120 (2022)

TES Detector for ALPS II

Authors: Rikhav Shah, Katharina-Sophie Isleif, Friederike Januschek, Axel Lindner, Matthias Schott

Abstract: The application of cryogenic single photon detectors has found great use in high precision particle physics experiments such as ALPS (Any Light Particle Search) II, which implements it for fundamental studies to search for new particles. ALPS II is a light-shining-through-a-wall experiment searching for axion-like-particles, which couple to photons. The extremely low rate of photons generated by t… ▽ More The application of cryogenic single photon detectors has found great use in high precision particle physics experiments such as ALPS (Any Light Particle Search) II, which implements it for fundamental studies to search for new particles. ALPS II is a light-shining-through-a-wall experiment searching for axion-like-particles, which couple to photons. The extremely low rate of photons generated by the conversion of such axion-like-particles necessitates a detector setup capable of low energy (~ 1 eV; as dictated by cavity optics) single photon detection with high efficiency and an ultra-low background level, with long-term stability. This can be realised by a Transition Edge Sensor (TES) setup with low-temperature SQUID readout. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Comments: Proceedings contribution to EPS-HEP 2021, submitted to Proceedings of Science

Fiber buckling in confined viscous flows: an absolute instability described by the Ginzburg-Landau equation

Authors: Jean Cappello, Olivia du Roure, François Gallaire, Camille Duprat, Anke Lindner

Abstract: We explore the dynamics of a flexible fiber transported by a viscous flow in a Hele-Shaw cell of height comparable to the fiber height. We show that long fibers aligned with the flow experience a buckling instability. Competition between viscous and elastic forces leads to the deformation of the fiber into a wavy shape convolved by a Bell-shaped envelope. We characterize the wavelength and phase v… ▽ More We explore the dynamics of a flexible fiber transported by a viscous flow in a Hele-Shaw cell of height comparable to the fiber height. We show that long fibers aligned with the flow experience a buckling instability. Competition between viscous and elastic forces leads to the deformation of the fiber into a wavy shape convolved by a Bell-shaped envelope. We characterize the wavelength and phase velocity of the deformation as well as the growth and spreading of the envelope. Our study of the spatio-temporal evolution of the deformation reveals a linear and absolute instability arising from a local mechanism well described by the Ginzburg-Landau equation. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Numerical Simulations of the Nonlinear Quantum Vacuum in the Heisenberg-Euler Weak-Field Expansion

Authors: Andreas Lindner, Baris Ölmez, Hartmut Ruhl

Abstract: The Heisenberg-Euler theory of the quantum vacuum supplements Maxwell's theory of electromagnetism with nonlinear light-light interactions. These originate in vacuum fluctuations, a key prediction of quantum theory, and can be triggered by high-intensity laser pulses, causing a variety of intriguing phenomena. A highly accurate numerical scheme for solving the nonlinear equations due to the leadin… ▽ More The Heisenberg-Euler theory of the quantum vacuum supplements Maxwell's theory of electromagnetism with nonlinear light-light interactions. These originate in vacuum fluctuations, a key prediction of quantum theory, and can be triggered by high-intensity laser pulses, causing a variety of intriguing phenomena. A highly accurate numerical scheme for solving the nonlinear equations due to the leading orders of the Heisenberg-Euler weak-field expansion is presented. The algorithm possesses an almost linear vacuum dispersion relation even for comparably small wavelengths and incorporates a nonphysical modes filter. The implemented solver is tested in one spatial dimension against a set of known analytical results for vacuum birefringence and harmonic generation. More complex scenarios for harmonic generation are demonstrated in two and three spatial dimensions. △ Less

Submitted 27 September, 2023; v1 submitted 16 September, 2021; originally announced September 2021.

Comments: 35 pages, 34 figures

Journal ref: Journal of Computational Physics: X 17 (2023) 100124

Programmed Wrapping and Assembly of Droplets with Mesoscale Polymers

Authors: Dylan M. Barber, Zhefei Yang, Lucas Prevost, Olivia du Roure, Anke Lindner, Todd Emrick, Alfred J. Crosby

Abstract: Nature is remarkably adept at using interfaces to build structures, encapsulate reagents, and regulate biological processes. Inspired by Nature, we describe flexible polymer-based ribbons, termed "mesoscale polymers" (MSPs), to modulate interfacial interactions with liquid droplets. This produces unprecedented hybrid assemblies in the forms of flagellum-like structures and MSP-wrapped droplets. Su… ▽ More Nature is remarkably adept at using interfaces to build structures, encapsulate reagents, and regulate biological processes. Inspired by Nature, we describe flexible polymer-based ribbons, termed "mesoscale polymers" (MSPs), to modulate interfacial interactions with liquid droplets. This produces unprecedented hybrid assemblies in the forms of flagellum-like structures and MSP-wrapped droplets. Successful preparation of these hybrid structures hinges on interfacial interactions and tailored MSP compositions, such as MSPs with domains possessing distinctly different affinity for fluid-fluid interfaces as well as mechanical properties. In situ measurements of MSP-droplet interactions confirm that MSPs possess a negligible bending stiffness, allowing interfacial energy to drive mesoscale assembly. By exploiting these interfacial driving forces, mesoscale polymers are demonstrated as a powerful platform that underpins the preparation of sophisticated hybrid structures in fluids. △ Less

Submitted 20 August, 2021; originally announced August 2021.

Journal ref: Adv. Funct. Mater. 2020, 2002704

Run-to-Tumble Variability Controls the Surface Residence Times of ${\it E.~coli}$ Bacteria

Authors: Gaspard Junot, Thierry Darnige, Anke Lindner, Vincent A. Martinez, Jochen Arlt, Angela Dawson, Wilson C. K. Poon, Harold Auradou, Eric Clément

Abstract: Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecede… ▽ More Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecedent tumbling. A motility model accounting for a large behavioural variability in run-time duration, reproduces all experimental findings and gives new insights into surface trapping efficiency. △ Less

Submitted 21 June, 2022; v1 submitted 23 July, 2021; originally announced July 2021.

Journal ref: Phys. Rev. Lett. 128, 248101 (2022)

Simulating MADMAX in 3D: Requirements for Dielectric Axion Haloscopes

Authors: S. Knirck, J. Schütte-Engel, S. Beurthey, D. Breitmoser, A. Caldwell, C. Diaconu, J. Diehl, J. Egge, M. Esposito, A. Gardikiotis, E. Garutti, S. Heyminck, F. Hubaut, J. Jochum, P. Karst, M. Kramer, C. Krieger, D. Labat, C. Lee, X. Li, A. Lindner, B. Majorovits, S. Martens, M. Matysek, E. Öz , et al. (16 additional authors not shown)

Abstract: We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to $30\,\%$ compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We… ▽ More We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to $30\,\%$ compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of $10^{-3} c$ and inhomogeneities of the external magnetic field at the scale of $10\,\%$ have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than $20\,\%$ for a benchmark boost factor with a bandwidth of $50\,{\rm MHz}$ at $22\,{\rm GHz}$, corresponding to an axion mass of $90\,μ{\rm eV}$. We find that the maximum allowed disk tilt is $100\,μ{\rm m}$ divided by the disk diameter, the required disk planarity is $20\,μ{\rm m}$ (min-to-max) or better, and the maximum allowed surface roughness is $100\,μ{\rm m}$ (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling. △ Less

Submitted 13 October, 2021; v1 submitted 13 April, 2021; originally announced April 2021.

Comments: 25 pages, 12 figures; added detail, updated references, matches published version

Report number: MPP-2021-61

Journal ref: JCAP10(2021)034

Signatures of elastoviscous buckling in the dilute rheology of stiff polymers

Authors: Brato Chakrabarti, Yanan Liu, Olivia du Roure, Anke Lindner, David Saintillan

Abstract: As a stiff polymer tumbles in shear flow, it experiences compressive viscous forces that can cause it to buckle and undergo a sequence of morphological transitions with increasing flow strength. We use numerical simulations to uncover the effects of these transitions on the steady shear rheology of a dilute suspension of stiff polymers. Our results agree with classic scalings for Brownian rods in… ▽ More As a stiff polymer tumbles in shear flow, it experiences compressive viscous forces that can cause it to buckle and undergo a sequence of morphological transitions with increasing flow strength. We use numerical simulations to uncover the effects of these transitions on the steady shear rheology of a dilute suspension of stiff polymers. Our results agree with classic scalings for Brownian rods in relatively weak flows but depart from them above the buckling threshold. Signatures of elastoviscous buckling include enhanced shear thinning and an increase in the magnitude of normal stress differences. We discuss our findings in the light of past work on rigid Brownian rods and non-Brownian elastic fibers and highlight the subtle role of thermal fluctuations in triggering instabilities. △ Less

Submitted 15 June, 2021; v1 submitted 22 February, 2021; originally announced February 2021.

Gas cooling of test masses for future gravitational-wave observatories

Authors: Christoph Reinhardt, Alexander Franke, Jörn Schaffran, Roman Schnabel, Axel Lindner

Abstract: Recent observations made with Advanced LIGO and Advanced Virgo have initiated the era of gravitational-wave astronomy. The number of events detected by these "2nd Generation" (2G) ground-based observatories is partially limited by noise arising from temperature-induced position fluctuations of the test mass mirror surfaces used for probing spacetime dynamics. The design of next-generation gravitat… ▽ More Recent observations made with Advanced LIGO and Advanced Virgo have initiated the era of gravitational-wave astronomy. The number of events detected by these "2nd Generation" (2G) ground-based observatories is partially limited by noise arising from temperature-induced position fluctuations of the test mass mirror surfaces used for probing spacetime dynamics. The design of next-generation gravitational-wave observatories addresses this limitation by using cryogenically cooled test masses; current approaches for continuously removing heat (resulting from absorbed laser light) rely on heat extraction via black-body radiation or conduction through suspension fibres. As a complementing approach for extracting heat during observational runs, we investigate cooling via helium gas impinging on the test mass in free molecular flow. We establish a relation between cooling power and corresponding displacement noise, based on analytical models, which we compare to numerical simulations. Applying this theoretical framework with regard to the conceptual design of the Einstein Telescope (ET), we find a cooling power of 10 mW at 18 K for a gas pressure that exceeds the ET design strain noise goal by at most a factor of $\sim 3$ in the signal frequency band from 3 to 11 Hz. A cooling power of 100 mW at 18 K corresponds to a gas pressure that exceeds the ET design strain noise goal by at most a factor of $\sim 11$ in the band from 1 to 28 Hz. △ Less

Submitted 10 June, 2021; v1 submitted 18 January, 2021; originally announced January 2021.

On multivariate quasi-infinitely divisible distributions

Authors: David Berger, Merve Kutlu, Alexander Lindner

Abstract: A quasi-infinitely divisible distribution on $\mathbb{R}^d$ is a probability distribution $μ$ on $\mathbb{R}^d$ whose characteristic function can be written as the quotient of the characteristic functions of two infinitely divisible distributions on $\mathbb{R}^d$. Equivalently, it can be characterised as a probability distribution whose characteristic function has a Lévy--Khintchine type represen… ▽ More A quasi-infinitely divisible distribution on $\mathbb{R}^d$ is a probability distribution $μ$ on $\mathbb{R}^d$ whose characteristic function can be written as the quotient of the characteristic functions of two infinitely divisible distributions on $\mathbb{R}^d$. Equivalently, it can be characterised as a probability distribution whose characteristic function has a Lévy--Khintchine type representation with a "signed Lévy measure", a so called quasi--Lévy measure, rather than a Lévy measure. A systematic study of such distributions in the univariate case has been carried out in Lindner, Pan and Sato \cite{lindner}. The goal of the present paper is to collect some known results on multivariate quasi-infinitely divisible distributions and to extend some of the univariate results to the multivariate setting. In particular, conditions for weak convergence, moment and support properties are considered. A special emphasis is put on examples of such distributions and in particular on $\mathbb{Z}^d$-valued quasi-infinitely divisible distributions. △ Less

Submitted 7 January, 2021; originally announced January 2021.

MSC Class: 60E07

A Cramér--Wold device for infinite divisibility of $\mathbb{Z}^d$-valued distributions

Authors: David Berger, Alexander Lindner

Abstract: We show that a Cramér--Wold device holds for infinite divisibility of $\mathbb{Z}^d$-valued distributions, i.e. that the distribution of a $\mathbb{Z}^d$-valued random vector $X$ is infinitely divisible if and only if $\mathcal{L}(a^T X)$ is infinitely divisible for all $a\in \mathbb{R}^d$, and that this in turn is equivalent to infinite divisibility of $\mathcal{L}(a^T X)$ for all… ▽ More We show that a Cramér--Wold device holds for infinite divisibility of $\mathbb{Z}^d$-valued distributions, i.e. that the distribution of a $\mathbb{Z}^d$-valued random vector $X$ is infinitely divisible if and only if $\mathcal{L}(a^T X)$ is infinitely divisible for all $a\in \mathbb{R}^d$, and that this in turn is equivalent to infinite divisibility of $\mathcal{L}(a^T X)$ for all $a\in \mathbb{N}_0^d$. A key tool for proving this is a Lévy--Khintchine type representation with a signed Lévy measure for the characteristic function of a $\mathbb{Z}^d$-valued distribution, provided the characteristic function is zero-free. △ Less

Submitted 17 November, 2020; originally announced November 2020.

MSC Class: 60E07

Conceptual Design of BabyIAXO, the intermediate stage towards the International Axion Observatory

Authors: A. Abeln, K. Altenmüller, S. Arguedas Cuendis, E. Armengaud, D. Attié, S. Aune, S. Basso, L. Bergé, B. Biasuzzi, P. T. C. Borges De Sousa, P. Brun, N. Bykovskiy, D. Calvet, J. M. Carmona, J. F. Castel, S. Cebrián, V. Chernov, F. E. Christensen, M. M. Civitani, C. Cogollos, T. Dafní, A. Derbin, K. Desch, D. Díez, M. Dinter , et al. (101 additional authors not shown)

Abstract: This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for… ▽ More This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for the final system and thus serve as prototype for IAXO, but at the same time as a fully-fledged helioscope with relevant physics reach itself, and with potential for discovery. The BabyIAXO magnet will feature two 10 m long, 70 cm diameter bores, and will host two detection lines (optics and detector) of dimensions similar to the final ones foreseen for IAXO. BabyIAXO will detect or reject solar axions or ALPs with axion-photon couplings down to $g_{aγ} \sim 1.5 \times 10^{-11}$ GeV$^{-1}$, and masses up to $m_a\sim 0.25$ eV. BabyIAXO will offer additional opportunities for axion research in view of IAXO, like the development of precision x-ray detectors to identify particular spectral features in the solar axion spectrum, and the implementation of radiofrequency-cavity-based axion dark matter setups. △ Less

Submitted 4 March, 2021; v1 submitted 22 October, 2020; originally announced October 2020.

Comments: 77 pages, 49 figures. Prepared for submission to JHEP. Third version after referees comments

Design of the ALPS II Optical System

Authors: M. Diaz Ortiz, J. Gleason, H. Grote, A. Hallal, M. T. Hartman, H. Hollis, K. S. Isleif, A. James, K. Karan, T. Kozlowski, A. Lindner, G. Messineo, G. Mueller, J. H. Poeld, R. C. G. Smith, A. D. Spector, D. B. Tanner, L. -W. Wei, B. Willke

Abstract: The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This p… ▽ More The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This paper gives the first comprehensive recipe for the realization of the idea, proposed over 30 years ago, to use optical cavities before and after the wall to increase the power of the regenerated photon signal. The experiment is designed to achieve a sensitivity to the coupling between axion-like particles and photons down to g=2e-11 1/GeV for masses below 0.1 meV, more than three orders of magnitude beyond the sensitivity of previous laboratory experiments. The layout and main components that define ALPS II are discussed along with plans for reaching design sensitivity. An accompanying paper (Hallal, et al [1]) offers a more in-depth description of the heterodyne detection scheme, the first of two independent detection systems that will be implemented in ALPS II. △ Less

Submitted 21 December, 2021; v1 submitted 29 September, 2020; originally announced September 2020.

Comments: 26 pages, 5 figures

Report number: DESY 20-158