-
Analytical model for balling defects in laser melting using rivulet theory and solidification
Authors:
Zane Taylor,
Tharun Reddy,
Maureen Fitzpatrick,
Kwan Kim,
Wei Li,
Chu Lun Alex Leung,
Peter D. Lee,
Kaila M. Bertsch,
Leora Dresselhaus-Marais
Abstract:
In the laser welding and additive manufacturing (AM) communities, the balling defect is primarily attributed to the action of fluid instabilities with a few authors suggesting other mechanisms. Without commenting on the validity of the fluid instability driven \textit{mechanism} of balling in AM, this work intends to present the most realistic analytical discussion of the balling defect driven pur…
▽ More
In the laser welding and additive manufacturing (AM) communities, the balling defect is primarily attributed to the action of fluid instabilities with a few authors suggesting other mechanisms. Without commenting on the validity of the fluid instability driven \textit{mechanism} of balling in AM, this work intends to present the most realistic analytical discussion of the balling defect driven purely by fluid instabilities. Synchrotron-based X-ray radiography of thin samples indicate that fluid instability growth rates and solidification can be comparable in magnitude and thus compete. Neglecting the action of fluid flows and heat transport, this work presents an analytical formalism which accounts for fluid instabilities and solidification competition, giving a continuous transition from balling to non-balling which is lacking in current literature. We adapt a Rivulet instability model from the fluid physics community to account for the stabilizing effects of the substrate which the Plateau-Rayleigh instability model does not account for, and estimate the instability growth rate. Our model predicts instability growth at higher wavelengths and shallower melt pool depths relative to width, as well as strong sensitivity to the solidification front curvature. Deviations between model predictions and our experimental results demonstrate the importance of fluid flows and heat transport in the balling process. Our experiments further demonstrate at least one mechanism by which the melt pool length and balling wavelength are not equivalent, as commonly claimed.
△ Less
Submitted 21 April, 2025; v1 submitted 18 February, 2025;
originally announced February 2025.
-
Tuning the mechanical behaviour of additively manufactured metamaterials with twinning and meta-harmonics
Authors:
David McArthur,
PJ Tan,
Chu Lun Alex Leung
Abstract:
Body-Centred Cubic (BCC) lattices with twinned meta-crystal architecture inspired by the strengthening of bulk metals have significantly improved mechanical performance; however, their deformation behaviour and underlying strengthening mechanisms remain unclear. Here, we reveal that twinning causes a transition from bending to stretch-dominated behaviour in BCC lattices, eliciting vast improvement…
▽ More
Body-Centred Cubic (BCC) lattices with twinned meta-crystal architecture inspired by the strengthening of bulk metals have significantly improved mechanical performance; however, their deformation behaviour and underlying strengthening mechanisms remain unclear. Here, we reveal that twinning causes a transition from bending to stretch-dominated behaviour in BCC lattices, eliciting vast improvements in stiffness (+162%) and strength (+95%) without changing nodal connectivity. We designed meta-harmonic lattices by controlling a heterogenous distribution of twinned grain boundaries, inspired by bimodal harmonic microstructure, and we amplified the axial strain energy at location specific sites to further enhance the stiffness of BCC lattices by 206%. Our lattice design philosophy unleashes the potential of cellular materials for high-performance engineering applications.
△ Less
Submitted 5 March, 2025; v1 submitted 10 October, 2024;
originally announced October 2024.
-
Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing
Authors:
Yunhui Chen,
Samuel J. Clark,
David M. Collins,
Sebastian Marussi,
Simon A. Hunt,
Danielle M. Fenech,
Thomas Connolley,
Robert C. Atwood,
Oxana V. Magdysyuk,
Gavin J. Baxter,
Martyn A. Jones,
Chu Lun Alex Leung,
Peter D. Lee
Abstract:
The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a unique process replicator, real-space phase-contrast imaging enables quantification of the melt-pool boundary and flow dynamics during solidification. This imaging…
▽ More
The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a unique process replicator, real-space phase-contrast imaging enables quantification of the melt-pool boundary and flow dynamics during solidification. This imaging knowledge informed precise diffraction measurements of temporally resolved microstructural phases during transformation and stress development with a spatial resolution of 100 $μ$m. The diffraction quantified thermal gradient enabled a dendritic solidification microstructure to be predicted and coupled to the stress orientation and magnitude. The fast cooling rate entirely suppressed the formation of secondary phases or recrystallisation in the solid-state. Upon solidification, the stresses rapidly increase to the yield strength during cooling. This insight, combined with IN718 $'$s large solidification range suggests that the accumulated plasticity exhausts the alloy$'$s ductility, causing liquation cracking. This study has revealed additional fundamental mechanisms governing the formation of highly non-equilibrium microstructures during DED-AM.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing
Authors:
Yunhui Chen,
Samuel J. Clark,
Lorna Sinclair,
Chu Lun Alex Leung,
Sebastian Marussi,
Thomas Connolley,
Oxana V. Magdysyuk,
Robert C. Atwood,
Gavin J. Baxter,
Martyn A. Jones,
David G. McCartney,
Iain Todd,
Peter D. Lee
Abstract:
The mechanical performance of Directed Energy Deposition Additive Manufactured (DED-AM) components can be highly material dependent. Through in situ and operando synchrotron X-ray imaging we capture the underlying phenomena controlling build quality of stainless steel (SS316) and titanium alloy (Ti6242 or Ti-6Al-2Sn-4Zr-2Mo). We reveal three mechanisms influencing the build efficiency of titanium…
▽ More
The mechanical performance of Directed Energy Deposition Additive Manufactured (DED-AM) components can be highly material dependent. Through in situ and operando synchrotron X-ray imaging we capture the underlying phenomena controlling build quality of stainless steel (SS316) and titanium alloy (Ti6242 or Ti-6Al-2Sn-4Zr-2Mo). We reveal three mechanisms influencing the build efficiency of titanium alloys compared to stainless steel: blown powder sintering; reduced melt-pool wetting due to the sinter; and pore pushing in the melt-pool. The former two directly increase lack of fusion porosity, while the later causes end of track porosity. Each phenomenon influences the melt-pool characteristics, wetting of the substrate and hence build efficacy and undesirable microstructural feature formation. We demonstrate that porosity is related to powder characteristics, pool flow, and solidification front morphology. Our results clarify DED-AM process dynamics, illustrating why each alloy builds differently, facilitating the wider application of additive manufacturing to new materials.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
