Showing 1–48 of 48 results for author: Lerosey, G

Measurements of Reconfigurable Intelligent Surface in 5G System Within a Reverberation Chamber at mmWave

Authors: L. Bastianelli, R. Diamanti, E. Colella, V. Mariani Primiani, F. Moglie, M. A. Toubal, M. Odit, J. -B. Gros, Y. Nasser, G. Lerosey, L. Santamaria, A. Allasia, M. Crozzoli, M. Boldi, E. Zimaglia, V. Lieti, M. Colombo, D. Micheli

Abstract: In this paper we evaluated the performance of a reconfigurable intelligent surface tested with a fifth generation signal provided by a commercial fifth generation base station. We adopted a reverberation chamber as a real life propagating environment. Tests were conducted at the millimeter wave frequency range. This measurement campaign was carried out under the H2020 European project RISE-6G and… ▽ More In this paper we evaluated the performance of a reconfigurable intelligent surface tested with a fifth generation signal provided by a commercial fifth generation base station. We adopted a reverberation chamber as a real life propagating environment. Tests were conducted at the millimeter wave frequency range. This measurement campaign was carried out under the H2020 European project RISE-6G and a collaboration program between TIM S.p.A., Nokia and Università Politecnica delle Marche. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: Accepted at EuCAP 2024

Empirical Validation of the Impedance-Based RIS Channel Model in an Indoor Scattering Environment

Authors: Placido Mursia, Taghrid Mazloum, Frederic Munoz, Vincenzo Sciancalepore, Gabriele Gradoni, Raffaele D Errico, Marco Di Renzo, Xavier Costa-Perez, Antonio Clemente, Geoffroy Lerosey

Abstract: Ensuring the precision of channel modeling plays a pivotal role in the development of wireless communication systems, and this requirement remains a persistent challenge within the realm of networks supported by Reconfigurable Intelligent Surfaces (RIS). Achieving a comprehensive and reliable understanding of channel behavior in RIS-aided networks is an ongoing and complex issue that demands furth… ▽ More Ensuring the precision of channel modeling plays a pivotal role in the development of wireless communication systems, and this requirement remains a persistent challenge within the realm of networks supported by Reconfigurable Intelligent Surfaces (RIS). Achieving a comprehensive and reliable understanding of channel behavior in RIS-aided networks is an ongoing and complex issue that demands further exploration. In this paper, we empirically validate a recently-proposed impedance-based RIS channel model that accounts for the mutual coupling at the antenna array and precisely models the presence of scattering objects within the environment as a discrete array of loaded dipoles. To this end, we exploit real-life channel measurements collected in an office environment to demonstrate the validity of such a model and its applicability in a practical scenario. Finally, we provide numerical results demonstrating that designing the RIS configuration based upon such model leads to superior performance as compared to reference schemes. △ Less

Submitted 1 December, 2023; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: Submitted for conference publication

Engineering of intelligent reflecting surfaces: Reflection locality and angular stability

Authors: Javad Shabanpour, Vladimir Lenets, Geoffroy Lerosey, Sergei Tretyakov, Constantin Simovski

Abstract: Reconfigurable intelligent surfaces (RISs) are electromagnetically passive controllable structures, deflecting the incident wave beam in directions predefined by the control signal. A usual way to design RIS based on metasurfaces (MSs) is based on the application of the approximation in which the reflective properties of a uniform MS are attributed to a unit cell of the non-uniform one. We call th… ▽ More Reconfigurable intelligent surfaces (RISs) are electromagnetically passive controllable structures, deflecting the incident wave beam in directions predefined by the control signal. A usual way to design RIS based on metasurfaces (MSs) is based on the application of the approximation in which the reflective properties of a uniform MS are attributed to a unit cell of the non-uniform one. We call this approximation the reflection locality. In the present paper, we show that this approximation may result in heavy errors. We also find a condition under which this approximation is applicable for a wide range of incidence and deflection angles. This condition is the angular stability of the reflection phase of a uniform MS based on which the non-uniform one is generated. We present an approximate analytical proof of the equivalence of the reflection locality and angular stability. As an example, we report theoretical and experimental results we obtained for a binary RIS whose generic uniform analogue has the angular stability. Meanwhile, for its counterpart without angular stability (the so-called mushroom MS) the same model fails. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Model-free Optimization and Experimental Validation of RIS-assisted Wireless Communications under Rich Multipath Fading

Authors: Tianrui Chen, Minglei You, Yangyishi Zhang, Gan Zheng, Jean Baptiste Gros, Geoffroy Lerosey, Youssef Nasser, Fraser Burton, Gabriele Gradoni

Abstract: Reconfigurable intelligent surface (RIS) devices have emerged as an effective way to control the propagation channels for enhancing the end-users' performance. However, RIS optimization involves configuring the radio frequency response of a large number of radiating elements, which is challenging in real-world applications due to high computational complexity. In this paper, a model-free cross-ent… ▽ More Reconfigurable intelligent surface (RIS) devices have emerged as an effective way to control the propagation channels for enhancing the end-users' performance. However, RIS optimization involves configuring the radio frequency response of a large number of radiating elements, which is challenging in real-world applications due to high computational complexity. In this paper, a model-free cross-entropy (CE) algorithm is proposed to optimize the binary RIS configuration for improving the signal-to-noise ratio (SNR) at the receiver. One key advantage of the proposed method is that it only requires system performance indicators, e.g., the received SNR, without the need for channel models or channel state information. Both simulations and experiments are conducted to evaluate the performance of the proposed CE algorithm. This study provides an experimental demonstration of the channel hardening effect in a multi-antenna RIS-assisted wireless system under rich multipath fading. △ Less

Submitted 15 February, 2024; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: accepted by IEEE Wireless Communications Letters

Super-resolved imaging based on spatiotemporal wavefront shaping

Authors: Guillaume Noetinger, Samuel Métais, Geoffroy Lerosey, Mathias Fink, Sébastien M. Popoff, Fabrice Lemoult

Abstract: A novel approach to improving the performances of confocal scanning imaging is proposed. We experimentally demonstrate its feasibility using acoustic waves. It relies on a new way to encode spatial information using the temporal dimension. By moving an emitter, used to insonify an object, along a circular path, we create a temporally modulated wavefield. Due to the cylindrical symmetry of the prob… ▽ More A novel approach to improving the performances of confocal scanning imaging is proposed. We experimentally demonstrate its feasibility using acoustic waves. It relies on a new way to encode spatial information using the temporal dimension. By moving an emitter, used to insonify an object, along a circular path, we create a temporally modulated wavefield. Due to the cylindrical symmetry of the problem and its temporal periodicity, the spatiotemporal input field can be decomposed into harmonics corresponding to different spatial vortices, or topological charges. Acquiring the back-reflected waves with receivers which are also rotating, multiple images of the same object with different Point Spread Functions (PSFs) are obtained. Not only is the resolution improved compared to a standard confocal configuration, but the accumulation of information also allows building images beating the diffraction limit. The topological robustness of the approach promises good performances in real life conditions. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 5 pages, 4 figures Supplementary file

Reconfigurable Intelligent Surface-assisted Classification of Modulations using Deep Learning

Authors: Mir Lodro, Hamidreza Taghvaee, Jean Baptiste Gros, Steve Greedy, Geofrroy Lerosey, Gabriele Gradoni

Abstract: The fifth generating (5G) of wireless networks will be more adaptive and heterogeneous. Reconfigurable intelligent surface technology enables the 5G to work on multistrand waveforms. However, in such a dynamic network, the identification of specific modulation types is of paramount importance. We present a RIS-assisted digital classification method based on artificial intelligence. We train a conv… ▽ More The fifth generating (5G) of wireless networks will be more adaptive and heterogeneous. Reconfigurable intelligent surface technology enables the 5G to work on multistrand waveforms. However, in such a dynamic network, the identification of specific modulation types is of paramount importance. We present a RIS-assisted digital classification method based on artificial intelligence. We train a convolutional neural network to classify digital modulations. The proposed method operates and learns features directly on the received signal without feature extraction. The features learned by the convolutional neural network are presented and analyzed. Furthermore, the robust features of the received signals at a specific SNR range are studied. The accuracy of the proposed classification method is found to be remarkable, particularly for low levels of SNR. △ Less

Submitted 17 September, 2022; originally announced September 2022.

Multi-path fading and interference mitigation with Reconfigurable Intelligent Surfaces

Authors: Jean Baptiste Gros, Geoffroy Lerosey, Fabrice Lemoult, Mir Lodro, Steve Greedy, Gabriele Gradoni

Abstract: We exploit multi-path fading propagation to improve both the signal-to-interference-plus-noise-ratio and the stability of wireless communications within electromagnetic environments that support rich multipath propagation. Quasi-passive propagation control with multiple binary reconfigurable intelligent surfaces is adopted to control the stationary waves supported by a metallic cavity hosting a so… ▽ More We exploit multi-path fading propagation to improve both the signal-to-interference-plus-noise-ratio and the stability of wireless communications within electromagnetic environments that support rich multipath propagation. Quasi-passive propagation control with multiple binary reconfigurable intelligent surfaces is adopted to control the stationary waves supported by a metallic cavity hosting a software-defined radio link. Results are demonstrated in terms of the error vector magnitude minimization of a quadrature phase-shift modulation scheme under no-line-of-sight conditions. It is found that the magnitude of fluctuation of received symbols is reduced to a stable constellation by increasing the number of individual surfaces, or elements, thus demonstrating channel hardening. By using a second software-defined radio device as a jammer, we demonstrate the ability of the RIS to mitigate the co-channel interference by channel hardening. Results are of particular interest in smart radio environments for mobile network architectures beyond 5G. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 13 Pages, submitted to IEEE Access

Experimental Evaluation of Multi-operator RIS-assisted Links in Indoor Environment

Authors: Mir Lodro, Jean-Baptiste Gros, Steve Greedy, Geoffroy Lerosey, Anas Al Rawi, Gabriele Gradoni

Abstract: In this work, we present reconfigurable intelligent surface (RIS)-assisted optimization of the multiple links in the same indoor environment. Multiple RISs from different operators can co-exists and handle independent robust communication links in the same indoor environment. We investigated the key performance metrics with the help of two simultaneously operating RIS-empowered robust communicatio… ▽ More In this work, we present reconfigurable intelligent surface (RIS)-assisted optimization of the multiple links in the same indoor environment. Multiple RISs from different operators can co-exists and handle independent robust communication links in the same indoor environment. We investigated the key performance metrics with the help of two simultaneously operating RIS-empowered robust communication links at different center frequencies in the same indoor environment. We found with the help of bit error rate (BER) and error vector magnitude (EVM) measurements that two operators can co-exist in the same RF environment without seriously impacting quality of service of users. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Comments: 4 pages, 8 figures

Smart Radio Environments

Authors: Gabriele Gradoni, Marco Di Renzo, Ana Diaz-Rubio, Sergei Tretyakov, Christophe Caloz, Zhen Peng, Andrea Alu, Geoffroy Lerosey, Mathias Fink, Vincenzo Galdi, Tie Jun Cui, Benjamin Frazier, Steven Anlage, Marco Salucci, Andrea Massa, Qiang Cheng, Jinghe Wang, Shi Jin, Davide Dardari, Nicolo Decarli, Okan Yurduseven, Michail Matthaiou, Mitchell Kenney, George Gordon, Orestis Georgiou , et al. (5 additional authors not shown)

Abstract: This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures fo… ▽ More This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures for future mobile communications networks towards 6G. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Comments: 55 pages, 22 figures, submitted to Reviews of Electromagnetics

Experimental demonstration of a mmWave passive access point extender based on a binary reconfigurable intelligent surface

Authors: Vladislav Popov, Mikhail Odit, Jean-Baptiste Gros, Vladimir Lenets, Akira Kumagai, Mathias Fink, Kotaro Enomoto, Geoffroy Lerosey

Abstract: As data rates demands are exploding, 5G will soon rely on mmWaves that offer much higher bandwidths. Yet at these frequencies, attenuation and diffraction of waves require point to point communications with beamforming base stations that are complex and power greedy. Furthermore, since any obstacle at these frequencies completely blocks the waves, the networks must be extremely dense, resulting in… ▽ More As data rates demands are exploding, 5G will soon rely on mmWaves that offer much higher bandwidths. Yet at these frequencies, attenuation and diffraction of waves require point to point communications with beamforming base stations that are complex and power greedy. Furthermore, since any obstacle at these frequencies completely blocks the waves, the networks must be extremely dense, resulting in dramatic increase of its cost. One way to avoid this problem is to redirect beams coming from base stations at many locations with Reconfigurable Intelligent Surfaces, in order to increase their coverage even in cluttered environments. Here we describe and experimentally demonstrate a binary tunable metasurface operating at 28~GHz, based on standard PCB and off the shelves PIN diodes. We show that it can be used as a Reconfigurable Intelligent Surface that beamforms an incoming plane wave at a given angle to one or several outgoing plane waves at angles reconfigurable in real time. Most importantly we use this 20~cm$\times$20~cm reconfigurable Intelligent Surface alongside software defined radio and up/down converters at 28~GHz, and demonstrate a wireless link between an emitter and a receiver 10~meters away, in a non line of sight configuration, hence proving the validity of the approach. △ Less

Submitted 5 July, 2021; originally announced July 2021.

A Reconfigurable Intelligent Surface at mmWave based on a binary phase tunable metasurface

Authors: Jean-Baptiste Gros, Vladislav Popov, Mikhail A. Odit, Vladimir Lenets, Geoffroy Lerosey

Abstract: Originally introduced in the early 2010's, the idea of smart environments through reconfigurable intelligent surfaces (RIS) controlling the reflections of the electromagnetic waves has attracted much attention in recent years in preparation for the future 6G. Since reconfigurable intelligent surfaces are not based on increasing the number of sources, they could indeed pave the way to greener and p… ▽ More Originally introduced in the early 2010's, the idea of smart environments through reconfigurable intelligent surfaces (RIS) controlling the reflections of the electromagnetic waves has attracted much attention in recent years in preparation for the future 6G. Since reconfigurable intelligent surfaces are not based on increasing the number of sources, they could indeed pave the way to greener and potentially limitless wireless communications. In this paper, we design, model and demonstrate experimentally a millimeter wave reconfigurable intelligent surface based on an electronically tunable metasurface with binary phase modulation. We first study numerically the unit cell of the metasurface, based on a PIN diode, and obtain a good phase shift and return loss for both polarizations, over a wide frequency range around 28.5 GHz. We then fabricate and characterize the unit cell and verify its properties, before fabricating the whole 10 cm x10 cm reconfigurable intelligent surface. We propose an analytical description of the use that can be done of the binary phase RIS, both in the near field (reflectarray configuration) and in the far field (access point extender). We finally verify experimentally that the designed RIS works as expected, performing laboratory experiments of millimeter wave beamforming both in the near field and far field configuration. Our experimental results demonstrate the high efficiency of our binary phase RIS to control millimeter waves in any kind of scenario and this at the sole cost of the energy dissipated by the PIN diodes used in our design. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Wireless Environment as a Service Enabled by Reconfigurable Intelligent Surfaces: The RISE-6G Perspective

Authors: Emilio Calvanese Strinati, George C. Alexandropoulos, Vincenzo Sciancalepore, Marco Di Renzo, Henk Wymeersch, Dinh-Thuy Phan-huy, Maurizio Crozzoli, Raffaele D'Errico, Elisabeth De Carvalho, Petar Popovski, Paolo Di Lorenzo, Luca Bastianelli, Mathieu Belouar, Julien Etienne Mascolo, Gabriele Gradoni, Sendy Phang, Geoffroy Lerosey, Benoît Denis

Abstract: The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructu… ▽ More The design of 6th Generation (6G) wireless networks points towards flexible connect-and-compute technologies capable to support innovative services and use cases. Targeting the 2030 horizon, 6G networks are poised to pave the way for sustainable human-centered smart societies and vertical industries, such that wireless networks will be transformed into a distributed smart connectivity infrastructure, where new terminal types are embedded in the daily environment. In this context, the RISE-6G project aims at investigating innovative solutions that capitalize on the latest advances in the emerging technology of Reconfigurable Intelligent Surfaces (RISs), which offers dynamic and goal-oriented radio wave propagation control, enabling the concept of the wireless environment as a service. The project will focus on: i) the realistic modeling of RIS-assisted signal propagation, ii) the investigation of the fundamental limits of RIS-empowered wireless communications and sensing, and iii) the design of efficient algorithms for orchestrating networking RISs, in order to implement intelligent, sustainable, and dynamically programmable wireless environments enabling diverse services that go well beyond the 5G capabilities. RISE-6G will offer two unprecedented proof-of-concepts for realizing controlled wireless environments in near-future use cases. △ Less

Submitted 13 April, 2021; originally announced April 2021.

Comments: 6 pages, 5 figures, to be presented in 2021 Joint EuCNC & 6G Summit

Three-dimensional acoustic lensing with a bubbly diamond metamaterial

Authors: Maxime Lanoy, Fabrice Lemoult, Geoffroy Lerosey, Arnaud Tourin, Valentin Leroy, John H. Page

Abstract: A sound wave travelling in water is scattered by a periodic assembly of air bubbles. The local structure matters even in the low frequency regime. If the bubbles are arranged in a face-centered cubic (fcc) lattice, a total band gap opens near the Minnaert resonance frequency. If they are arranged in the diamond structure, which one obtains by simply adding a second bubble to the unit cell, one fin… ▽ More A sound wave travelling in water is scattered by a periodic assembly of air bubbles. The local structure matters even in the low frequency regime. If the bubbles are arranged in a face-centered cubic (fcc) lattice, a total band gap opens near the Minnaert resonance frequency. If they are arranged in the diamond structure, which one obtains by simply adding a second bubble to the unit cell, one finds an additional branch with a negative slope (optical branch). For a single specific frequency, the medium behaves as if its refractive index (relative to water) is exactly $n=-1$. We show that a slab of this material can be used to design a three three-dimensional flat lens. We also report super-resolution focusing in the near field of the slab and illustrate its potential for imaging in three dimensions. △ Less

Submitted 3 February, 2021; v1 submitted 6 January, 2021; originally announced January 2021.

Comments: 6 pages, 6 figures

Reconfigurable Intelligent Surfaces and Metamaterials: The Potential of Wave Propagation Control for 6G Wireless Communications

Authors: George C. Alexandropoulos, Geoffroy Lerosey, Merouane Debbah, Mathias Fink

Abstract: The future 6G of wireless communication networks will have to meet multiple requirements in increasingly demanding levels, either individually or in combinations in small groups. This trend has spurred recent research activities on transceiver hardware architectures and novel wireless connectivity concepts. Among the emerging wireless hardware architectures belong the Reconfigurable Intelligent Su… ▽ More The future 6G of wireless communication networks will have to meet multiple requirements in increasingly demanding levels, either individually or in combinations in small groups. This trend has spurred recent research activities on transceiver hardware architectures and novel wireless connectivity concepts. Among the emerging wireless hardware architectures belong the Reconfigurable Intelligent Surfaces (RISs), which are artificial planar structures with integrated electronic circuits that can be programmed to manipulate an incoming ElectroMagnetic (EM) field in a wide variety of functionalities. Incorporating RISs in wireless networks has been recently advocated as a revolutionary means to transform any naturally passive wireless communication environment to an active one. This can be accomplished by deploying cost-effective and easy to coat RISs to the environment's objects (e.g., building facades and indoor walls/ceilings), thus, offering increased environmental intelligence for the scope of diverse wireless networking objectives. In this paper, we first provide a brief history on wave propagation control for optics and acoustics, and overview two representative indoor wireless trials at 2.47GHz for spatial EM modulation with a passive discrete RIS. The first trial dating back to 2014 showcases the feasibility of highly accurate spatiotemporal focusing and nulling, while the second very recent one demonstrates that passive RISs can enrich multipath scattering, thus, enabling throughput boosted communication links. Motivated by the late research excitement on the RIS potential for intelligent EM wave propagation modulation, we describe the status on RIS hardware architectures and present key open challenges and future research directions for RIS design and RIS-empowered 6G wireless communications. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Comments: 9 pages; 7 figures; IEEE ComSoc TCCN Newsletter, vol. 6, no. 1, June 2020

Reconfigurable Intelligent Surfaces vs. Relaying: Differences, Similarities, and Performance Comparison

Authors: M. Di Renzo, K. Ntontin, J. Song, F. H. Danufane, X. Qian, F. Lazarakis, J. de Rosny, D. -T. Phan-Huy, O. Simeone, R. Zhang, M. Debbah, G. Lerosey, M. Fink, S. Tretyakov, S. Shamai

Abstract: Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When… ▽ More Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When used in wireless networks, RISs may operate in a manner similar to relays. This paper elaborates on the key differences and similarities between RISs that are configured to operate as anomalous reflectors and relays. In particular, we illustrate numerical results that highlight the spectral efficiency gains of RISs when their size is sufficiently large as compared with the wavelength of the radio waves. In addition, we discuss key open issues that need to be addressed for unlocking the potential benefits of RISs. △ Less

Submitted 21 February, 2020; v1 submitted 23 August, 2019; originally announced August 2019.

Comments: Submitted for journal publication (revised version)

Multiple scattering enabled superdirectivity from a subwavelength ensemble of resonators

Authors: S. Metais, G. Lerosey, F. Lemoult

Abstract: An ensemble of resonators arranged on a sub-wavelength scale is usually considered as a bulk effective medium, known as a metamaterial, and can offer unusual macroscopic properties. Here, we take a different approach and limit ourselves to the study of only a few number of such elementary components and demonstrate that it still offers uncommon opportunities. Typically, thanks to the multiple scat… ▽ More An ensemble of resonators arranged on a sub-wavelength scale is usually considered as a bulk effective medium, known as a metamaterial, and can offer unusual macroscopic properties. Here, we take a different approach and limit ourselves to the study of only a few number of such elementary components and demonstrate that it still offers uncommon opportunities. Typically, thanks to the multiple scattering and the phase shift that the resonances offer, we observe fields that vary at scales completely independent of the wavelength in freespace. By smartly tuning the resonance frequencies, we can design at will the complex current distribution in those resonators. This way, we design a superdirective antenna, {\it ie.} an antenna that is surprisingly more directive than its size would foreshadow. This approach is verified numerically and experimentally in the context of microwaves, but this applies to any wave-field where sub-wavelength resonators exist. △ Less

Submitted 28 June, 2019; originally announced June 2019.

Comments: 3 figures

Journal ref: Phys. Rev. B 100, 121115 (2019)

Uncorrelated Configurations and Field Uniformity in Reverberation Chambers Stirred by Tunable Metasurfaces

Authors: Jean-Baptiste Gros, Geoffroy Lerosey, Fabrice Mortessagne, Ulrich Kuhl, Olivier Legrand

Abstract: Reverberation chambers are currently used to test electromagnetic compatibility as well as to characterize antenna efficiency, wireless devices, and MIMO systems. The related measurements are based on statistical averages and their fluctuations. We introduce a very efficient mode stirring process based on electronically reconfigurable metasurfaces (ERMs). By locally changing the field boundary con… ▽ More Reverberation chambers are currently used to test electromagnetic compatibility as well as to characterize antenna efficiency, wireless devices, and MIMO systems. The related measurements are based on statistical averages and their fluctuations. We introduce a very efficient mode stirring process based on electronically reconfigurable metasurfaces (ERMs). By locally changing the field boundary conditions, the ERMs allow to generate a humongous number of uncorrelated field realizations even within small reverberation chambers. We fully experimentally characterize this stirring process by determining these uncorrelated realizations via the autocorrelation function of the transmissions. The IEC-standard uniformity criterion parameter $σ_{dB}$ is also investigated and reveals the performance of this stirring. The effect of short paths on the two presented quantities is identified. We compare the experimental results on the uniformity criterion parameter with a corresponding model based on random matrix theory and find a good agreement, where the only parameter, the modal overlap, is extracted by the quality factor. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Journal ref: Appl. Phys. Lett. 118, 144101 (2021)

Smart Radio Environments Empowered by AI Reconfigurable Meta-Surfaces: An Idea Whose Time Has Come

Authors: Marco Di Renzo, Merouane Debbah, Dinh-Thuy Phan-Huy, Alessio Zappone, Mohamed-Slim Alouini, Chau Yuen, Vincenzo Sciancalepore, George C. Alexandropoulos, Jakob Hoydis, Haris Gacanin, Julien de Rosny, Ahcene Bounceu, Geoffroy Lerosey, Mathias Fink

Abstract: Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner. Currently, two main factors prevent wireless network operators from building such networks: 1) the lack of control of the wireles… ▽ More Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner. Currently, two main factors prevent wireless network operators from building such networks: 1) the lack of control of the wireless environment, whose impact on the radio waves cannot be customized, and 2) the current operation of wireless radios, which consume a lot of power because new signals are generated whenever data has to be transmitted. In this paper, we challenge the usual "more data needs more power and emission of radio waves" status quo, and motivate that future wireless networks necessitate a smart radio environment: A transformative wireless concept, where the environmental objects are coated with artificial thin films of electromagnetic and reconfigurable material (that are referred to as intelligent reconfigurable meta-surfaces), which are capable of sensing the environment and of applying customized transformations to the radio waves. Smart radio environments have the potential to provide future wireless networks with uninterrupted wireless connectivity, and with the capability of transmitting data without generating new signals but recycling existing radio waves. This paper overviews the current research efforts on smart radio environments, the enabling technologies to realize them in practice, the need of new communication-theoretic models for their analysis and design, and the long-term and open research issues to be solved towards their massive deployment. In a nutshell, this paper is focused on discussing how the availability of intelligent reconfigurable meta-surfaces will allow wireless network operators to redesign common and well-known network communication paradigms. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: Submitted for journal publication

Wave Chaos in a Cavity of Regular Geometry with Tunable Boundaries

Authors: Jean-Baptiste Gros, Philipp del Hougne, Geoffroy Lerosey

Abstract: Wave chaotic systems underpin a wide range of research activities, from fundamental studies of quantum chaos via electromagnetic compatibility up to more recently emerging applications like microwave imaging for security screening, antenna characterisation or wave-based analog computation. To implement a wave chaotic system experimentally, traditionally cavities of elaborate geometries (bowtie sha… ▽ More Wave chaotic systems underpin a wide range of research activities, from fundamental studies of quantum chaos via electromagnetic compatibility up to more recently emerging applications like microwave imaging for security screening, antenna characterisation or wave-based analog computation. To implement a wave chaotic system experimentally, traditionally cavities of elaborate geometries (bowtie shapes, truncated circles, parallelepipeds with hemispheres) are employed because the geometry dictates the wave field's characteristics. Here, we propose and experimentally verify a radically different paradigm: a cavity of regular geometry but with tunable boundary conditions, experimentally implemented by leveraging a reconfigurable metasurface. Our results set new foundations for the use and the study of chaos in wave physics. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Comments: 10 pages, 6 figures, article submitted to Phys Rev Letter

Journal ref: Phys. Rev. A 101, 061801 (2020)

Measuring Dirac Cones in a Sub-Wavelength Metamaterial

Authors: Simon Yves, Thomas Berthelot, Mathias Fink, Geoffroy Lerosey, Fabrice Lemoult

Abstract: The exciting discovery of bi-dimensional systems in condensed matter physics has triggered the search of their photonic analogues. In this letter, we describe a general scheme to reproduce some of the systems ruled by a tight-binding Hamiltonian in a locally resonant metamaterial: by specifically controlling the structure and the composition it is possible to engineer the band structure at will. W… ▽ More The exciting discovery of bi-dimensional systems in condensed matter physics has triggered the search of their photonic analogues. In this letter, we describe a general scheme to reproduce some of the systems ruled by a tight-binding Hamiltonian in a locally resonant metamaterial: by specifically controlling the structure and the composition it is possible to engineer the band structure at will. We numerically and experimentally demonstrate this assertion in the microwave domain by reproducing the band structure of graphene, the most famous example of those 2D-systems, and by accurately extracting the Dirac cones. This is a direct evidence that opting for a crystalline description of those sub-wavelength scaled systems, as opposed to the usual description in terms of effective parameters, makes them a really convenient tabletop platform to investigate the tantalizing challenges that solid-state physics offer. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Turning Optical Complex Media into Universal Reconfigurable Linear Operators by Wavefront Shaping

Authors: Maxime W. Matthès, Philipp del Hougne, Julien de Rosny, Geoffroy Lerosey, Sébastien M. Popoff

Abstract: Performing linear operations using optical devices is a crucial building block in many fields ranging from telecommunication to optical analogue computation and machine learning. For many of these applications, key requirements are robustness to fabrication inaccuracies and reconfigurability. Current designs of custom-tailored photonic devices or coherent photonic circuits only partially satisfy t… ▽ More Performing linear operations using optical devices is a crucial building block in many fields ranging from telecommunication to optical analogue computation and machine learning. For many of these applications, key requirements are robustness to fabrication inaccuracies and reconfigurability. Current designs of custom-tailored photonic devices or coherent photonic circuits only partially satisfy these needs. Here, we propose a way to perform linear operations by using complex optical media such as multimode fibers or thin scattering layers as a computational platform driven by wavefront shaping. Given a large random transmission matrix (TM) representing light propagation in such a medium, we can extract a desired smaller linear operator by finding suitable input and output projectors. We discuss fundamental upper bounds on the size of the linear transformations our approach can achieve and provide an experimental demonstration. For the latter, first we retrieve the complex medium's TM with a non-interferometric phase retrieval method. Then, we take advantage of the large number of degrees of freedom to find input wavefronts using a Spatial Light Modulator (SLM) that cause the system, composed of the SLM and the complex medium, to act as a desired complex-valued linear operator on the optical field. We experimentally build several $16\times16$ complex-valued operators, and are able to switch from one to another at will. Our technique offers the prospect of reconfigurable, robust and easy-to-fabricate linear optical analogue computation units. △ Less

Submitted 12 October, 2018; originally announced October 2018.

Optimal Communication Channels in a Disordered World with Tamed Randomness

Authors: Philipp del Hougne, Mathias Fink, Geoffroy Lerosey

Abstract: Multi-channel wireless systems have become a standard solution to address our information society's ever-increasing demand for more information transfer. The ultimate bound on the capacity such systems can achieve is the limited channel diversity in a given propagation medium, and countless proposals to reduce channel cross-talk by engineering software or hardware details of the signals and antenn… ▽ More Multi-channel wireless systems have become a standard solution to address our information society's ever-increasing demand for more information transfer. The ultimate bound on the capacity such systems can achieve is the limited channel diversity in a given propagation medium, and countless proposals to reduce channel cross-talk by engineering software or hardware details of the signals and antenna arrays have been proposed. Here we demonstrate the physical shaping of the propagation medium itself to achieve optimal channel diversity. Using a reconfigurable metasurface placed inside a random environment, we tune the disorder and impose perfect orthogonality of wireless channels. We present experiments in the microwave domain in which we impose equal weights of the channel matrix eigenvalues for up to 4x4 systems, and almost equal weights in larger systems. We further describe one example of wireless image transmission in an office room in which we augmented the 3x3 system's number of effectively independent channels from 2 to the optimum of 3. △ Less

Submitted 26 September, 2018; originally announced October 2018.

Comments: Original version of the manuscript submitted for peer review; 15 pages, 6 figures; Supplementary Information with 5 pages is appended at the end of the file; source files in Word format have been converted to PDF

Journal ref: Nat. Electron. 2, 36-41 (2019)

Left-handed Band in an Electromagnetic Metamaterial Inducedby Sub-wavelength Multiple Scattering

Authors: Simon Yves, Thomas Berthelot, Mathias Fink, Geoffroy Lerosey, Fabrice Lemoult

Abstract: Due to the deep sub-wavelength unit cell in metamaterials, the quasi-static approximation is usually employed to describe the propagation. By making pairs of resonators, we highlight that multiple scattering also occurs at this scale and results in the existence of a dipolar resonance, which leads to a negative index of refraction when we consider several resonators. We experimentally verify the p… ▽ More Due to the deep sub-wavelength unit cell in metamaterials, the quasi-static approximation is usually employed to describe the propagation. By making pairs of resonators, we highlight that multiple scattering also occurs at this scale and results in the existence of a dipolar resonance, which leads to a negative index of refraction when we consider several resonators. We experimentally verify the possibility of obtaining a negative index of refraction in periodic metamaterials in two different ways, and eventually demonstrates a superlensing effect in both cases. △ Less

Submitted 26 September, 2018; originally announced September 2018.

Journal ref: Appl. Phys. Lett. 114, 111101 (2019)

Locally Polarized Wave Propagation through Metamaterials' Crystallinity

Authors: Simon Yves, Thomas Berthelot, Geoffroy Lerosey, Fabrice Lemoult

Abstract: Wave propagation control is of fundamental interest in many areas of Physics. It can be achieved with wavelength-scaled photonic crystals, hence avoiding low frequency applications. By contrast, metamaterials are structured on a deep-subwavelength scale, and therefore usually described through homogenization, neglecting the unit-cell structuration. Here, we show with microwaves that, by considerin… ▽ More Wave propagation control is of fundamental interest in many areas of Physics. It can be achieved with wavelength-scaled photonic crystals, hence avoiding low frequency applications. By contrast, metamaterials are structured on a deep-subwavelength scale, and therefore usually described through homogenization, neglecting the unit-cell structuration. Here, we show with microwaves that, by considering their inherent crystallinity, we can induce wave propagation carrying angular momenta within a subwavelength-scaled collection of wires. Then, inspired by the Quantum Valley-Hall Effect in condensed matter physics, we exploit this bulk circular polarization to create modes propagating along particular interfaces. The latter also carry an edge angular momentum whose conservation during the propagation allows wave routing by design in specific directions. This experimental study not only evidences that crystalline metamaterials are a straightforward tabletop platform to emulate exciting solid-state physics phenomena at the macroscopic scale, but it also opens the door to crystalline polarized subwavelength waveguides. △ Less

Submitted 26 September, 2018; originally announced September 2018.

Comments: 5 figures

Journal ref: Phys. Rev. B 101, 035127 (2020)

Leveraging Chaos for Wave-Based Analog Computation: Demonstration with Indoor Wireless Communication Signals

Authors: Philipp del Hougne, Geoffroy Lerosey

Abstract: In sight of fundamental thermal limits on further substantial performance improvements of modern digital computational processing units, wave-based analog computation is becoming an enticing alternative. A wave, as it propagates through a carefully tailored medium, performs the desired computational operation. Yet, the necessary designs are so intricate that experimental demonstrations will necess… ▽ More In sight of fundamental thermal limits on further substantial performance improvements of modern digital computational processing units, wave-based analog computation is becoming an enticing alternative. A wave, as it propagates through a carefully tailored medium, performs the desired computational operation. Yet, the necessary designs are so intricate that experimental demonstrations will necessitate further technological advances. Here, we show that, counterintuitively, the carefully tailored medium can be replaced with a random medium, subject to an appropriate shaping of the incident wave front. Using tunable metasurface reflect-arrays, we demonstrate our concept experimentally in a chaotic microwave cavity. We conclude that off-the-shelf wireless communication infrastructure in combination with a simple reflect-array suffices to perform analog computation with Wi-Fi waves reverberating in a room. △ Less

Submitted 21 August, 2018; v1 submitted 11 April, 2018; originally announced April 2018.

Comments: 13 pages including 5 figures + 7 pages Supplemental Material

Journal ref: Phys. Rev. X 8, 041037 (2018)

Acoustic double negativity induced by position correlations within a disordered set of monopolar resonators

Authors: Maxime Lanoy, John H. Page, Geoffroy Lerosey, Fabrice Lemoult, Arnaud Tourin, Valentin Leroy

Abstract: Using a Multiple Scattering Theory algorithm, we investigate numerically the transmission of ultrasonic waves through a disordered locally resonant metamaterial containing only monopolar resonators. By comparing the cases of a perfectly random medium with its pair correlated counterpart, we show that the introduction of short range correlation can substantially impact the effective parameters of t… ▽ More Using a Multiple Scattering Theory algorithm, we investigate numerically the transmission of ultrasonic waves through a disordered locally resonant metamaterial containing only monopolar resonators. By comparing the cases of a perfectly random medium with its pair correlated counterpart, we show that the introduction of short range correlation can substantially impact the effective parameters of the sample. We report, notably, the opening of an acoustic transparency window in the region of the hybridization band gap. Interestingly, the transparency window is found to be associated with negative values of both effective compressibility and density. Despite this feature being unexpected for a disordered medium of monopolar resonators, we show that it can be fully described analytically and that it gives rise to negative refraction of waves. △ Less

Submitted 11 October, 2017; v1 submitted 9 October, 2017; originally announced October 2017.

Journal ref: Phys. Rev. B 96, 220201 (2017)

Multiple scattering limit in optical microscopy

Authors: Amaury Badon, A. Claude Boccara, Geoffroy Lerosey, Mathias Fink, Alexandre Aubry

Abstract: Optical microscopy offers a unique insight of biological structures with a sub-micrometer resolution and a minimum invasiveness. However, the inhomogeneities of the specimen itself can induce multiple scattering of light and optical aberrations which limit the observation to depths close to the surface. To predict quantitatively the penetration depth in microscopy, we theoretically derive the sing… ▽ More Optical microscopy offers a unique insight of biological structures with a sub-micrometer resolution and a minimum invasiveness. However, the inhomogeneities of the specimen itself can induce multiple scattering of light and optical aberrations which limit the observation to depths close to the surface. To predict quantitatively the penetration depth in microscopy, we theoretically derive the single-to-multiple scattering ratio in reflection. From this key quantity, the multiple scattering limit is deduced for various microscopic imaging techniques such as confocal microscopy, optical coherence tomography and related methods. △ Less

Submitted 7 November, 2017; v1 submitted 11 September, 2017; originally announced September 2017.

Comments: 18 pages, 7 figures

Journal ref: Opt. Exp. 25, 28914-28934, 2017

Crystalline Soda Can Metamaterial exhibiting Graphene-like Dispersion at subwavelength scale

Authors: S. Yves, F. Lemoult, M. Fink, G. Lerosey

Abstract: Graphene, a honeycomb lattice of carbon atoms ruled by tight-binding interaction, exhibits extraordinary electronic properties due to the presence of Dirac cones within its band structure. These intriguing singularities have naturally motivated the discovery of their classical analogues. In this work, we present a general and direct procedure to reproduce the peculiar physics of graphene within a… ▽ More Graphene, a honeycomb lattice of carbon atoms ruled by tight-binding interaction, exhibits extraordinary electronic properties due to the presence of Dirac cones within its band structure. These intriguing singularities have naturally motivated the discovery of their classical analogues. In this work, we present a general and direct procedure to reproduce the peculiar physics of graphene within a very simple acoustic metamaterial: a double lattice of soda cans resonant at two different frequencies. The first triangular sub-lattice generates a bandgap at low frequency, which induces a tight-binding coupling between the resonant defects of the second Honeycomb one, hence allowing us to obtain a graphene-like band structure. We prove the relevance of this approach by showing that both numerical and experimental dispersion relations exhibit the requested Dirac cone. We also demonstrate the straightforward monitoring of the coupling strength within the crystal of resonant defects. This work shows that crystalline metamaterials are very promising candidates to investigate tantalizing solid-state physics phenomena with classical waves. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Shaping Microwave Fields using Non-Linear Unsolicited Feedback: Application to Enhanced Energy Harvesting

Authors: Philipp del Hougne, Mathias Fink, Geoffroy Lerosey

Abstract: Wavefront Shaping has emerged over the past decade as a powerful tool to control wave propagation through complex media, initially in optics and more recently also in the microwave domain with important applications in telecommunication, imaging and energy transfer. The crux of implementing wavefront shaping concepts in real life is often its need for (direct) feedback, requiring access to the tar… ▽ More Wavefront Shaping has emerged over the past decade as a powerful tool to control wave propagation through complex media, initially in optics and more recently also in the microwave domain with important applications in telecommunication, imaging and energy transfer. The crux of implementing wavefront shaping concepts in real life is often its need for (direct) feedback, requiring access to the target to focus on. Here, we present the shaping of a microwave field based on indirect, unsolicited and blind feedback which may be the pivotal step towards practical implementations. With the example of a radiofrequency harvester in a metallic cavity, we demonstrate tenfold enhancement of the harvested power by wavefront shaping based on non-linear signals detected at an arbitrary position away from the harvesting device. △ Less

Submitted 8 September, 2017; v1 submitted 1 June, 2017; originally announced June 2017.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Applied 8, 061001 (2017)

Crystalline metamaterials for topological properties at subwavelength scales

Authors: Simon Yves, Romain Fleury, Thomas Berthelot, Mathias Fink, Fabrice Lemoult, Geoffroy Lerosey

Abstract: The exciting discovery of topological condensed matter systems has lately triggered a search for their photonic analogs, motivated by the possibility of robust backscattering-immune light transport. However, topological photonic phases have so far only been observed in photonic crystals and waveguide arrays, which are inherently physically wavelength scaled, hindering their application in compact… ▽ More The exciting discovery of topological condensed matter systems has lately triggered a search for their photonic analogs, motivated by the possibility of robust backscattering-immune light transport. However, topological photonic phases have so far only been observed in photonic crystals and waveguide arrays, which are inherently physically wavelength scaled, hindering their application in compact subwavelength systems. In this letter, we tackle this problem by patterning the deep subwavelength resonant elements of metamaterials onto specific lattices, and create crystalline metamaterials that can develop complex nonlocal properties due to multiple scattering, despite their very subwavelength spatial scale that usually implies to disregard their structure. These spatially dispersive systems can support subwavelength topological phases, as we demonstrate at microwaves by direct field mapping. Our approach gives a straightforward tabletop platform for the study of photonic topological phases, and allows to envision applications benefiting the compactness of metamaterials and the amazing potential of topological insulators. △ Less

Submitted 25 May, 2017; originally announced May 2017.

Spatio-temporal wavefront shaping in a microwave cavity

Authors: Philipp del Hougne, Fabrice Lemoult, Mathias Fink, Geoffroy Lerosey

Abstract: Controlling waves in complex media has become a major topic of interest, notably through the concepts of time reversal and wavefront shaping. Recently, it was shown that spatial light modulators can counter-intuitively focus waves both in space and time through multiple scattering media when illuminated with optical pulses. In this letter we transpose the concept to a microwave cavity using flat a… ▽ More Controlling waves in complex media has become a major topic of interest, notably through the concepts of time reversal and wavefront shaping. Recently, it was shown that spatial light modulators can counter-intuitively focus waves both in space and time through multiple scattering media when illuminated with optical pulses. In this letter we transpose the concept to a microwave cavity using flat arrays of electronically tunable resonators. We prove that maximizing the Green's function between two antennas at a chosen time yields diffraction limited spatio-temporal focusing. Then, changing the photons' dwell time inside the cavity, we modify the relative distribution of the spatial and temporal degrees of freedom (DoF), and we demonstrate that it has no impact on the field enhancement: wavefront shaping makes use of all available DoF, irrespective of their spatial or temporal nature. Our results prove that wavefront shaping using simple electronically reconfigurable arrays of reflectors is a viable approach to the spatio-temporal control of microwaves, with potential applications in medical imaging, therapy, telecommunications, radar or sensing. They also offer new fundamental insights regarding the coupling of spatial and temporal DoF in complex media. △ Less

Submitted 21 July, 2016; originally announced July 2016.

Comments: 12 pages, 4 figures

Journal ref: Phys. Rev. Lett. 117, 134302 (2016)

Spatio-Temporal Imaging of Light Transport in Highly Scattering Media under White Light Illumination

Authors: Amaury Badon, Dayan Li, Geoffroy Lerosey, Albert C. Boccara, Mathias Fink, Alexandre Aubry

Abstract: Imaging the propagation of light in time and space is crucial in optics, notably for the study of complex media. We here demonstrate the passive measurement of time-dependent Green's functions between every point at the surface of a strongly scattering medium by means of low coherence interferometry. The experimental access to this Green's matrix is essential since it contains all the information… ▽ More Imaging the propagation of light in time and space is crucial in optics, notably for the study of complex media. We here demonstrate the passive measurement of time-dependent Green's functions between every point at the surface of a strongly scattering medium by means of low coherence interferometry. The experimental access to this Green's matrix is essential since it contains all the information about the complex trajectories of light within the medium. In particular, the spatio-temporal spreading of the diffusive halo and the coherent backscattering effect can be locally investigated in the vicinity of each point acting as a virtual source. On the one hand, this approach allows a quantitative imaging of the diffusion constant in the scattering medium with a spatial resolution of the order of a few transport mean free paths. On the other hand, our approach is able to reveal and quantify the anisotropy of light diffusion, which can be of great interest for optical characterization purposes. This study opens important perspectives both in optical diffuse tomography with potential applications to biomedical imaging and in fundamental physics for the experimental investigation of Anderson localization. △ Less

Submitted 21 October, 2016; v1 submitted 20 June, 2016; originally announced June 2016.

Comments: 11 pages, 8 figures

Journal ref: Optica 3, 1160-1166 (2016)

Intensity-only measurement of partially uncontrollable transmission matrix: demonstration with wave-field shaping in a microwave cavity

Authors: Philipp del Hougne, Boshra Rajaei, Laurent Daudet, Geoffroy Lerosey

Abstract: Transmission matrices (TMs) have become a powerful and widely used tool to describe and control wave propagation in complex media. In certain scenarios the TM is partially uncontrollable, complicating its identification and use. In standard optical wavefront shaping experiments, uncontrollable reflections or additional sources may be the cause; in reverberating cavities, uncontrollable reflections… ▽ More Transmission matrices (TMs) have become a powerful and widely used tool to describe and control wave propagation in complex media. In certain scenarios the TM is partially uncontrollable, complicating its identification and use. In standard optical wavefront shaping experiments, uncontrollable reflections or additional sources may be the cause; in reverberating cavities, uncontrollable reflections off the walls have that effect. Here we employ phase retrieval techniques to identify such a partially uncontrollable system's TM solely based on random intensity-only reference measurements. We demonstrate the feasibility of our method by focusing both on a single target as well as on multiple targets in a microwave cavity, using a phase-binary Spatial-Microwave-Modulator. △ Less

Submitted 7 June, 2016; originally announced June 2016.

Comments: 11 pages, 5 figures

Slow waves in locally resonant metamaterials line defect waveguides

Authors: Nadège Kaina, Alexandre Causier, Yoan Bourlier, Mathias Fink, Thomas Berthelot, Geoffroy Lerosey

Abstract: In the past decades, many efforts have been devoted to the temporal manipulation of waves, especially focusing on slowing down their propagation. In electromagnetism, from microwave to optics, as well as in acoustics or for elastic waves, slow wave propagation indeed largely benefits both applied and fundamental physics. It is for instance essential in analog signal computing through the design of… ▽ More In the past decades, many efforts have been devoted to the temporal manipulation of waves, especially focusing on slowing down their propagation. In electromagnetism, from microwave to optics, as well as in acoustics or for elastic waves, slow wave propagation indeed largely benefits both applied and fundamental physics. It is for instance essential in analog signal computing through the design of components such as delay lines and buffers, and it is one of the prerequisite for increased wave/matter interactions. Despite the interest of a broad community, researches have mostly been conducted in optics along with the development of wavelength scaled structured composite media, that appear promising candidates for compact slow light components. Yet their minimum structural scale prevents them from being transposed to lower frequencies where wavelengths range from sub-millimeter to meters. In this article, we propose to overcome this limitation thanks to the deep sub-wavelength scale of locally resonant metamaterials. In our approach, implemented here in the microwave regime, we show that introducing coupled resonant defects in such composite media allows the creation of deep sub-wavelength waveguides. We experimentally demonstrate that waves, while propagating in such waveguides, exhibit largely reduced group velocities. We qualitatively explain the mechanism underlying this slow wave propagation and first experimentally demonstrate, then numerically verify, how it can be taken advantage of to tune the velocity, achieving group indices ng as high as 227 over relatively large bandwidths. We conclude by highlighting the three beneficial consequences of our line defect slow wave waveguides in locally resonant metamaterials: the deep sub-wavelength scale, the very large group indices and the fact that slow wave propagation does not occur at the expense of drastic bandwidth reductions. △ Less

Submitted 7 July, 2017; v1 submitted 27 April, 2016; originally announced April 2016.

Exploiting spatiotemporal degrees of freedom for far field subwavelength focusing using time reversal in fractals

Authors: Matthieu Dupré, Fabrice Lemoult, Mathias Fink, Geoffroy Lerosey

Abstract: Materials which possess a high local density of states varying at a subwavelength scale theoretically permit to focus waves onto focal spots much smaller than the free space wavelength. To do so metamaterials -manmade composite media exhibiting properties not available in nature- are usually considered. However this approach is limited to narrow bandwidths due to their resonant nature. Here, we pr… ▽ More Materials which possess a high local density of states varying at a subwavelength scale theoretically permit to focus waves onto focal spots much smaller than the free space wavelength. To do so metamaterials -manmade composite media exhibiting properties not available in nature- are usually considered. However this approach is limited to narrow bandwidths due to their resonant nature. Here, we prove that it is possible to use a fractal resonator alongside time reversal to focus microwaves onto $λ/15$ subwavelength focal spots from the far field, on extremely wide bandwidths. We first numerically prove that this approach can be realized using a multiple channel time reversal mirror, that utilizes all the degrees of freedom offered by the fractal resonator. Then we experimentally demonstrate that this approach can be drastically simplified by coupling the fractal resonator to a complex medium, here a cavity, that efficiently converts its spatial degrees of freedom into temporal ones. This allows to achieve deep subwavelength focusing of microwaves using a single channel time reversal. Our method can be generalized to other systems coupling complex media and fractal resonators. △ Less

Submitted 5 March, 2016; originally announced March 2016.

Comments: 6 pages, 4 figures, one supplemental material file

Smart optical coherence tomography for ultra-deep imaging through highly scattering media

Authors: Amaury Badon, Dayan Li, Geoffroy Lerosey, A. Claude Boccara, Mathias Fink, Alexandre Aubry

Abstract: Multiple scattering of waves in disordered media is a nightmare whether it be for detection or imaging purposes. The best approach so far to get rid of multiple scattering is optical coherence tomography. It basically combines confocal microscopy and coherence time-gating to discriminate ballistic photons from a predominant multiple scattering background. Nevertheless, the imaging depth range rema… ▽ More Multiple scattering of waves in disordered media is a nightmare whether it be for detection or imaging purposes. The best approach so far to get rid of multiple scattering is optical coherence tomography. It basically combines confocal microscopy and coherence time-gating to discriminate ballistic photons from a predominant multiple scattering background. Nevertheless, the imaging depth range remains limited to 1 mm at best in human soft tissues. Here we propose a matrix approach of optical imaging to push back this fundamental limit. By combining a matrix discrimination of ballistic waves and iterative time-reversal, we show both theoretically and experimentally an extension of the imaging-depth limit by at least a factor two compared to optical coherence tomography. In particular, the reported experiment demonstrates imaging through a strongly scattering layer from which only one reflected photon over 1000 billion is ballistic. This approach opens a new route towards ultra-deep tissue imaging. △ Less

Submitted 7 November, 2016; v1 submitted 29 October, 2015; originally announced October 2015.

Comments: 14 pages, 9 figures

Journal ref: Sci. Adv. 2, e1600370, 2016

Retrieving time-dependent Green's functions in optics with low-coherence interferometry

Authors: Amaury Badon, Geoffroy Lerosey, Albert C. Boccara, Mathias Fink, Alexandre Aubry

Abstract: We report on the passive measurement of time-dependent Green's functions in the optical frequency domain with low-coherence interferometry. Inspired by previous studies in acoustics and seismology, we show how the correlations of a broadband and incoherent wave-field can directly yield the Green's functions between scatterers of a complex medium. Both the ballistic and multiple scattering componen… ▽ More We report on the passive measurement of time-dependent Green's functions in the optical frequency domain with low-coherence interferometry. Inspired by previous studies in acoustics and seismology, we show how the correlations of a broadband and incoherent wave-field can directly yield the Green's functions between scatterers of a complex medium. Both the ballistic and multiple scattering components of the Green's function are retrieved. This approach opens important perspectives for optical imaging and characterization in complex scattering media. △ Less

Submitted 12 January, 2015; v1 submitted 3 July, 2014; originally announced July 2014.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 114, 023901, 2015

Imaging With Nature: Compressive Imaging Using a Multiply Scattering Medium

Authors: Antoine Liutkus, David Martina, Sébastien Popoff, Gilles Chardon, Ori Katz, Geoffroy Lerosey, Sylvain Gigan, Laurent Daudet, Igor Carron

Abstract: The recent theory of compressive sensing leverages upon the structure of signals to acquire them with much fewer measurements than was previously thought necessary, and certainly well below the traditional Nyquist-Shannon sampling rate. However, most implementations developed to take advantage of this framework revolve around controlling the measurements with carefully engineered material or acqui… ▽ More The recent theory of compressive sensing leverages upon the structure of signals to acquire them with much fewer measurements than was previously thought necessary, and certainly well below the traditional Nyquist-Shannon sampling rate. However, most implementations developed to take advantage of this framework revolve around controlling the measurements with carefully engineered material or acquisition sequences. Instead, we use the natural randomness of wave propagation through multiply scattering media as an optimal and instantaneous compressive imaging mechanism. Waves reflected from an object are detected after propagation through a well-characterized complex medium. Each local measurement thus contains global information about the object, yielding a purely analog compressive sensing method. We experimentally demonstrate the effectiveness of the proposed approach for optical imaging by using a 300-micrometer thick layer of white paint as the compressive imaging device. Scattering media are thus promising candidates for designing efficient and compact compressive imagers. △ Less

Submitted 4 November, 2014; v1 submitted 2 September, 2013; originally announced September 2013.

Comments: 17 pages, 8 figures

Journal ref: Sci. Rep. 4, 5552 (2014)

Time Driven Subwavelength Focusing with Negative Refraction

Authors: M. Dubois, E. Bossy, S. Enoch, S. Guenneau, G. Lerosey, P. Sebbah

Abstract: Flat lens concept based on negative refraction proposed by Veselago in 1968 has been mostly investigated in monochromatic regime. It was recently recognized that time development of the super-lensing effect discovered in 2000 by Pendry is yet to be assessed and may spring surprises: Time-dependent illumination could improve the spatial resolution of the focusing. We investigate dynamics of flexura… ▽ More Flat lens concept based on negative refraction proposed by Veselago in 1968 has been mostly investigated in monochromatic regime. It was recently recognized that time development of the super-lensing effect discovered in 2000 by Pendry is yet to be assessed and may spring surprises: Time-dependent illumination could improve the spatial resolution of the focusing. We investigate dynamics of flexural wave focusing by a 45\degre-tilted square lattice of circular holes drilled in a Duraluminium plate. Time-resolved experiments reveal that the focused image shrinks with time below diffraction limit, with a lateral resolution increasing from 0.8 $λ$ to 0.35 $λ$, whereas focusing under harmonic excitation remains diffraction limited. Modal analysis reveals the role in pulse reconstruction of radiating lens resonances, which repeatedly self-synchronize at the focal spot to shape a super-oscillating field. △ Less

Submitted 2 March, 2014; v1 submitted 12 March, 2013; originally announced March 2013.

Comments: 5 figures

Journal ref: Phys. Rev. Lett. 114, 013902 January 2015

Ultra small mode volume defect cavities in spatially ordered and disordered metamaterials

Authors: Nadège Kaina, Fabrice Lemoult, Mathias Fink, Geoffroy Lerosey

Abstract: In this letter we study metamaterials made out of resonant electric wires arranged on a spatial scale much smaller than the free space wavelength and we show that they present a hybridization band that is insensible to positional disorder. We experimentally demonstrate defect cavities in disordered and ordered samples and prove that, analogous to those designed in photonic crystals, those cavities… ▽ More In this letter we study metamaterials made out of resonant electric wires arranged on a spatial scale much smaller than the free space wavelength and we show that they present a hybridization band that is insensible to positional disorder. We experimentally demonstrate defect cavities in disordered and ordered samples and prove that, analogous to those designed in photonic crystals, those cavities can present very high quality factors. In addition we show that they display mode volumes much smaller than a wavelength cube, owing to the deep subwavelength nature of the unit cell. We underline that this type of structure can be shrunk down to a period close of a few skin depth. Our approach paves the way towards the confinement and manipulation of waves at deep subwavelength scales in both ordered and disordered metamaterials. △ Less

Submitted 16 November, 2012; v1 submitted 12 December, 2011; originally announced December 2011.

Comments: two columns version, 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 102, 144104 (2013)

Dispersion in media containing resonant inclusions: where does it come from?

Authors: Fabrice Lemoult, Mathias Fink, Geoffroy Lerosey

Abstract: We study the propagation of waves in a quasi 1D homogeneous host medium filled with various resonators. We first prove that a far field coupling between the elements explains its dispersive nature. This coupling is interpreted as a Fano interference between the incoming wave and the waves re-radiated by each resonator, which experience a phase shift at resonance. We propose a simple formalism that… ▽ More We study the propagation of waves in a quasi 1D homogeneous host medium filled with various resonators. We first prove that a far field coupling between the elements explains its dispersive nature. This coupling is interpreted as a Fano interference between the incoming wave and the waves re-radiated by each resonator, which experience a phase shift at resonance. We propose a simple formalism that gives the complete dispersion relation of the medium in terms of the far field response of a single resonator. We prove that our approach applies to and unifies various domains such as metamaterials, hybridization band gap materials and designer's plasmons. Finally we show that those media, spatially random or organized on a scale larger than the wavelength, also present very interesting properties, which broadens the range of man made exotic materials. △ Less

Submitted 12 December, 2011; originally announced December 2011.

Comments: 13 pages, 4 figures

Exploiting the Time-Reversal Operator for Adaptive Optics, Selective Focusing and Scattering Pattern Analysis

Authors: Sébastien Michel Popoff, Alexandre Aubry, Geoffroy Lerosey, Mathias Fink, Albert-Claude Boccara, Sylvain Gigan

Abstract: We report on the experimental measurement of the backscattering matrix of a weakly scattering medium in optics, composed of a few dispersed gold nanobeads. The DORT method (Decomposition of the Time Reversal Operator) is applied to this matrix and we demonstrate selective and efficient focusing on individual scatterers, even through an aberrating layer. Moreover, we show that this approach provide… ▽ More We report on the experimental measurement of the backscattering matrix of a weakly scattering medium in optics, composed of a few dispersed gold nanobeads. The DORT method (Decomposition of the Time Reversal Operator) is applied to this matrix and we demonstrate selective and efficient focusing on individual scatterers, even through an aberrating layer. Moreover, we show that this approach provides the decomposition of the scattering pattern of a single nanoparticle. These results open important perspectives for optical imaging, characterization and selective excitation of nanoparticles. △ Less

Submitted 28 November, 2011; v1 submitted 11 August, 2011; originally announced August 2011.

Comments: 10 pages

Controlling Light Through Optical Disordered Media : Transmission Matrix Approach

Authors: S. M. Popoff, G. Lerosey, M. Fink, A. C. Boccara, S. Gigan

Abstract: We experimentally measure the monochromatic transmission matrix (TM) of an optical multiple scattering medium using a spatial light modulator together with a phase-shifting interferometry measurement method. The TM contains all information needed to shape the scattered output field at will or to detect an image through the medium. We confront theory and experiment for these applications and we stu… ▽ More We experimentally measure the monochromatic transmission matrix (TM) of an optical multiple scattering medium using a spatial light modulator together with a phase-shifting interferometry measurement method. The TM contains all information needed to shape the scattered output field at will or to detect an image through the medium. We confront theory and experiment for these applications and we study the effect of noise on the reconstruction method. We also extracted from the TM informations about the statistical properties of the medium and the light transport whitin it. In particular, we are able to isolate the contributions of the Memory Effect (ME) and measure its attenuation length. △ Less

Submitted 15 November, 2011; v1 submitted 26 July, 2011; originally announced July 2011.

Far field subwavelength imaging and focusing using a wire medium based resonant metalens

Authors: Fabrice Lemoult, Geoffroy Lerosey, Mathias Fink

Abstract: This is the second article in a series of two dealing with the concept of "resonant metalens" we introduced recently [Phys. Rev. Lett. 104, 203901 (2010)]. It is a new type of lens capable of coding in time and radiating efficiently in the far field region sub-diffraction information of an object. A proof of concept of such a lens is performed in the microwave range, using a medium made out of a s… ▽ More This is the second article in a series of two dealing with the concept of "resonant metalens" we introduced recently [Phys. Rev. Lett. 104, 203901 (2010)]. It is a new type of lens capable of coding in time and radiating efficiently in the far field region sub-diffraction information of an object. A proof of concept of such a lens is performed in the microwave range, using a medium made out of a square lattice of parallel conducting wires with finite length. We investigate a sub-wavelength focusing scheme with time reversal and demonstrate experimentally spots with focal widths of λ/25. Through a cross-correlation based imaging procedure we show an image reconstruction with a resolution of λ/80. Eventually we discuss the limitations of such a lens which reside essentially in losses. △ Less

Submitted 16 November, 2012; v1 submitted 4 June, 2010; originally announced June 2010.

Journal ref: Waves in Random and Complex Media, Vol. 21, pp. 614-627, 2011

Revisiting the wire medium: a resonant metalens

Authors: Fabrice Lemoult, Geoffroy Lerosey, Mathias Fink

Abstract: This article is the first one in a series of two dealing with the concept of "resonant metalens" we recently introduced [Phys. Rev. Lett. 104, 203901 (2010)]. Here, we focus on the physics of a medium with finite dimensions consisting on a square lattice of parallel conducting wires arranged on a sub-wavelength scale. This medium supports electromagnetic fields that vary much faster than the opera… ▽ More This article is the first one in a series of two dealing with the concept of "resonant metalens" we recently introduced [Phys. Rev. Lett. 104, 203901 (2010)]. Here, we focus on the physics of a medium with finite dimensions consisting on a square lattice of parallel conducting wires arranged on a sub-wavelength scale. This medium supports electromagnetic fields that vary much faster than the operating wavelength. We show that such modes are dispersive due to the finiteness of the medium. Their dispersion relation is established in a simple way, a link with designer plasmons is made, and the canalization phenomenon is reinterpreted at the light of our model. We explain how to take advantage of this dispersion in order to code sub-wavelength wave fields in time. Finally, we show that the resonant nature of the medium ensures an efficient coupling of these modes with free space propagating waves and, thanks to the Purcell effect, with a source placed in the near field of the medium. △ Less

Submitted 16 November, 2012; v1 submitted 4 June, 2010; originally announced June 2010.

Journal ref: Waves in Random and Complex Media, Vol. 21, pp. 591-613, 2011

Resonant Metalenses for Breaking the Diffraction Barrier

Authors: Fabrice Lemoult, Geoffroy Lerosey, Julien de Rosny, Mathias Fink

Abstract: We introduce the resonant metalens, a cluster of coupled subwavelength resonators. Dispersion allows the conversion of subwavelength wavefields into temporal signatures while the Purcell effect permits an efficient radiation of this information in the far-field. The study of an array of resonant wires using microwaves provides a physical understanding of the underlying mechanism. We experimentally… ▽ More We introduce the resonant metalens, a cluster of coupled subwavelength resonators. Dispersion allows the conversion of subwavelength wavefields into temporal signatures while the Purcell effect permits an efficient radiation of this information in the far-field. The study of an array of resonant wires using microwaves provides a physical understanding of the underlying mechanism. We experimentally demonstrate imaging and focusing from the far-field with resolutions far below the diffraction limit. This concept is realizable at any frequency where subwavelength resonators can be designed. △ Less

Submitted 4 June, 2010; originally announced June 2010.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett., vol. 104, pp. 203901 (2010)

Image Transmission Through an Opaque Material

Authors: S. M. Popoff, G. Lerosey, M. Fink, A. C. Boccara, S. Gigan

Abstract: Optical imaging relies on the ability to illuminate an object, collect and analyze the light it scatters or transmits. Propagation through complex media such as biological tissues was so far believed to degrade the attainable depth as well as the resolution for imaging because of multiple scattering. This is why such media are usually considered opaque. Very recently, we have proven that it is pos… ▽ More Optical imaging relies on the ability to illuminate an object, collect and analyze the light it scatters or transmits. Propagation through complex media such as biological tissues was so far believed to degrade the attainable depth as well as the resolution for imaging because of multiple scattering. This is why such media are usually considered opaque. Very recently, we have proven that it is possible to measure the complex mesoscopic optical transmission channels that allows light to traverse through such an opaque medium. Here we show that we can optimally exploit those channels to coherently transmit and recover with a high fidelity an arbitrary image, independently of the complexity of the propagation. △ Less

Submitted 23 September, 2010; v1 submitted 4 May, 2010; originally announced May 2010.

Journal ref: Nat. Commun. 1:81(2010)

Measuring the Transmission Matrix in Optics : An Approach to the Study and Control of Light Propagation in Disordered Media

Authors: S. M. Popoff, G. Lerosey, R. Carminati, M. Fink, A. C. Boccara, S. Gigan

Abstract: We introduce a method to experimentally measure the monochromatic transmission matrix of a complex medium in optics. This method is based on a spatial phase modulator together with a full-field interferometric measurement on a camera. We determine the transmission matrix of a thick random scattering sample. We show that this matrix exhibits statistical properties in good agreement with random ma… ▽ More We introduce a method to experimentally measure the monochromatic transmission matrix of a complex medium in optics. This method is based on a spatial phase modulator together with a full-field interferometric measurement on a camera. We determine the transmission matrix of a thick random scattering sample. We show that this matrix exhibits statistical properties in good agreement with random matrix theory and allows light focusing and imaging through the random medium. This method might give important insights into the mesoscopic properties of complex medium. △ Less

Submitted 18 January, 2010; v1 submitted 28 October, 2009; originally announced October 2009.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 104, 100601 (2010)