Showing 1–33 of 33 results for author: Lecocq, F

Cryogenic photonic link using an extended-InGaAs photodiode and short pulse illumination towards high-fidelity drive of superconducting qubits

Authors: Takuma Nakamura, Dahyeon Lee, Jason Horng, Florent Lecocq, John Teufel, Franklyn Quinlan

Abstract: We investigate short pulse illumination of a high-speed extended-InGaAs photodiode at cryogenic temperatures towards its use in control and readout of superconducting qubits. First, we demonstrate high detector responsivity at 1550 nm illumination at 20 mK, a wavelength band unavailable to cryogenic standard InGaAs detectors due to the temperature-dependent bandgap shift. Second, we demonstrate an… ▽ More We investigate short pulse illumination of a high-speed extended-InGaAs photodiode at cryogenic temperatures towards its use in control and readout of superconducting qubits. First, we demonstrate high detector responsivity at 1550 nm illumination at 20 mK, a wavelength band unavailable to cryogenic standard InGaAs detectors due to the temperature-dependent bandgap shift. Second, we demonstrate an improved signal-to-noise ratio (SNR) at the shot noise limit for cryogenic short optical pulse detection when compared to conventional modulated continuous-wave laser detection. At 40 uA of photocurrent and a detector temperature of 4 K, short pulse detection yields an SNR improvement of 20 dB and 3 dB for phase and amplitude quadratures, respectively. Lastly, we discuss how short pulse detection offers a path for signal multiplexing, with a demonstration of simultaneous production of microwave pulses at two different carrier frequencies. Together, these advancements establish a path towards low noise and power efficient multiplexed photonic links for quantum computing with a large number of superconducting qubits. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Interface-sensitive microwave loss in superconducting tantalum films sputtered on c-plane sapphire

Authors: Anthony P. McFadden, Jinsu Oh, Lin Zhou, Trevyn F. Q. Larson, Stephen Gill, Akash V. Dixit, Raymond Simmonds, Florent Lecocq

Abstract: Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss ar… ▽ More Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss are still not well understood. Here we present a systematic study of the structural and electrical properties of Ta and Nb films sputtered on c-plane sapphire at varying growth temperatures. As growth temperature is increased, our results show that the onset of epitaxial growth of alpha-phase Ta correlates with lower Ta surface roughness, higher critical temperature, and higher residual resistivity ratio, but surprisingly also correlates with a significant increase in loss at microwave frequency. Notably, this high level of loss is not observed in Nb films prepared in the same way and having very similar structure. By experimentally controlling the surface on which the Ta film is nucleated, we determine that the source of loss is only present in samples having an epitaxial Ta/sapphire interface and show that it is apparently mitigated by either growing a thin, epitaxial Nb inter-layer between the Ta film and the substrate or by intentionally treating, and effectively damaging, the sapphire surface with an in-situ argon plasma before Ta growth. In addition to elucidating this interfacial microwave loss, this work provides adequate process details to aid reproducible growth of low-loss Ta films across fabrication facilities. △ Less

Submitted 11 June, 2025; v1 submitted 21 December, 2024; originally announced December 2024.

Fabrication and characterization of low-loss Al/Si/Al parallel plate capacitors for superconducting quantum information applications

Authors: Anthony McFadden, Aranya Goswami, Tongyu Zhao, Teun van Schijndel, Trevyn F. Q. Larson, Sudhir Sahu, Stephen Gill, Florent Lecocq, Raymond Simmonds, Chris Palmstrøm

Abstract: Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the perform… ▽ More Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below $300nm$ with an approximate total height of 3$μ$m are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional $Al/AlO_x/Al$ Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500k and qubit $T_1$ times greater than 25$μ$s. These results suggest that Si-Fins are a promising technology for applications that require low loss, compact, superconductor-based capacitors with minimal stray capacitance. △ Less

Submitted 23 August, 2024; v1 submitted 2 August, 2024; originally announced August 2024.

A Traveling-Wave Parametric Amplifier and Converter

Authors: M. Malnou, B. T. Miller, J. A. Estrada, K. Genter, K. Cicak, J. D. Teufel, J. Aumentado, F. Lecocq

Abstract: High-fidelity qubit measurement is a critical element of all quantum computing architectures. In superconducting systems, qubits are typically measured by probing a readout resonator with a weak microwave tone which must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily becaus… ▽ More High-fidelity qubit measurement is a critical element of all quantum computing architectures. In superconducting systems, qubits are typically measured by probing a readout resonator with a weak microwave tone which must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily because of their low noise performance, approaching the quantum limit. However, they require isolators and circulators to route signals up the measurement chain, as well as to protect qubits from amplified noise. While these commercial components are wideband and very simple to use, their intrinsic loss, size, and magnetic shielding requirements impact the overall measurement efficiency while also limiting prospects for scalable readout in large-scale superconducting quantum computers. Here we demonstrate a parametric amplifier that achieves both broadband forward amplification and backward isolation in a single, compact, non-magnetic circuit that could be integrated on chip with superconducting qubits. It relies on a nonlinear transmission line which supports traveling-wave parametric amplification of forward propagating signals, and isolation via frequency conversion of backward propagating signals. This kind of traveling-wave parametric amplifier and converter is poised to reduce the readout hardware overhead when scaling up the size of superconducting quantum computers. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Low-noise cryogenic microwave amplifier characterization with a calibrated noise source

Authors: M. Malnou, T. F. Q. Larson, J. D. Teufel, F. Lecocq, J. Aumentado

Abstract: Parametric amplifiers have become a workhorse in superconducting quantum computing, however research and development of these devices has been hampered by inconsistent, and sometimes misleading noise performance characterization methodologies. The concepts behind noise characterization are deceptively simple, and there are many places where one can make mistakes, either in measurement or interpret… ▽ More Parametric amplifiers have become a workhorse in superconducting quantum computing, however research and development of these devices has been hampered by inconsistent, and sometimes misleading noise performance characterization methodologies. The concepts behind noise characterization are deceptively simple, and there are many places where one can make mistakes, either in measurement or interpretation and analysis. In this article we cover the basics of noise performance characterization, and the special problems it presents in parametric amplifiers with limited power handling capability. We illustrate the issues with three specific examples: a high-electron mobility transistor amplifier, a Josephson traveling-wave parametric amplifier, and a Josephson parametric amplifier. We emphasize the use of a 50-$Ω$ shot noise tunnel junction (SNTJ) as a broadband noise source, demonstrating its utility for cryogenic amplifier amplifications. These practical examples highlight the role of loss as well as the additional parametric amplifier `idler' input mode. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Fast, tunable, high fidelity cZ-gates between superconducting qubits with parametric microwave control of ZZ-coupling

Authors: X. Y. Jin, K. Cicak, Z. Parrott, S. Kotler, F. Lecocq, J. Teufel, J. Aumentado, E. Kapit, R. W. Simmonds

Abstract: Future quantum information processors require tunable coupling architectures that can produce high fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual $ZZ$ coupling an… ▽ More Future quantum information processors require tunable coupling architectures that can produce high fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual $ZZ$ coupling and the implementation of driven SWAP or SWAP-free controlled-$Z$ (c$Z$) gates. Our fully integrated, 2D on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multi-qubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP c$Z$ gate achieves an average fidelity of $99.44\pm 0.09$\% in a gate duration of 70~ns and a dispersively driven parametric SWAP-free c$Z$ gate attains an average fidelity of $99.47\pm 0.07$\% in only 30~ns. The fidelity remained above this value for over 8~hours and peaked twice with a maximum of $99.67\pm 0.14$\%. Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design. △ Less

Submitted 4 October, 2024; v1 submitted 4 May, 2023; originally announced May 2023.

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

Authors: Mustafa Bal, Akshay A. Murthy, Shaojiang Zhu, Francesco Crisa, Xinyuan You, Ziwen Huang, Tanay Roy, Jaeyel Lee, David van Zanten, Roman Pilipenko, Ivan Nekrashevich, Andrei Lunin, Daniel Bafia, Yulia Krasnikova, Cameron J. Kopas, Ella O. Lachman, Duncan Miller, Josh Y. Mutus, Matthew J. Reagor, Hilal Cansizoglu, Jayss Marshall, David P. Pappas, Kim Vu, Kameshwar Yadavalli, Jin-Su Oh , et al. (15 additional authors not shown)

Abstract: We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigati… ▽ More We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes. △ Less

Submitted 24 January, 2024; v1 submitted 25 April, 2023; originally announced April 2023.

Journal ref: npj Quantum Inf 10, 43 (2024)

Deepest sensitivity to wavelike dark photon dark matter with superconducting radio frequency cavities

Authors: Raphael Cervantes, Jose Aumentado, Caterina Braggio, Bianca Giaccone, Daniil Frolov, Anna Grassellino, Roni Harnik, Florent Lecocq, Oleksandr Melnychuk, Roman Pilipenko, Sam Posen, Alexander Romanenko

Abstract: Wavelike, bosonic dark matter candidates like axions and dark photons can be detected using microwave cavities known as haloscopes. Traditionally, haloscopes consist of tunable copper cavities operating in the TM$_{010}$ mode, but ohmic losses have limited their performance. In contrast, superconducting radio frequency (SRF) cavities can achieve quality factors of $\sim 10^{10}$, perhaps five orde… ▽ More Wavelike, bosonic dark matter candidates like axions and dark photons can be detected using microwave cavities known as haloscopes. Traditionally, haloscopes consist of tunable copper cavities operating in the TM$_{010}$ mode, but ohmic losses have limited their performance. In contrast, superconducting radio frequency (SRF) cavities can achieve quality factors of $\sim 10^{10}$, perhaps five orders of magnitude better than copper cavities, leading to more sensitive dark matter detectors. In this paper, we first derive that the scan rate of a haloscope experiment is proportional to the loaded quality factor $Q_L$, even if the cavity bandwidth is much narrower than the dark matter halo line shape. We then present a proof-of-concept search for dark photon dark matter using a nontunable ultrahigh quality SRF cavity. We exclude dark photon dark matter with kinetic mixing strengths of $χ> 1.5\times 10^{-16}$ for a dark photon mass of $m_{A^{\prime}} = 5.35μ$eV, achieving the deepest exclusion to wavelike dark photons by almost an order of magnitude. △ Less

Submitted 9 September, 2024; v1 submitted 5 August, 2022; originally announced August 2022.

Comments: 11 pages, 12 figures

Journal ref: Phys. Rev. D 110, 043022 (2024)

Observation of two-mode squeezing in a traveling wave parametric amplifier

Authors: Martina Esposito, Arpit Ranadive, Luca Planat, Sebastian Leger, Dorian Fraudet, Vincent Jouanny, Olivier Buisson, Wiebke Guichard, Cécile Naud, José Aumentado, Florent Lecocq, Nicolas Roch

Abstract: Traveling wave parametric amplifiers (TWPAs) have recently emerged as essential tools for broadband near quantum-limited amplification. However, their use to generate microwave quantum states still misses an experimental demonstration. In this letter, we report operation of a TWPA as a source of two-mode squeezed microwave radiation. We demonstrate broadband entanglement generation between two mod… ▽ More Traveling wave parametric amplifiers (TWPAs) have recently emerged as essential tools for broadband near quantum-limited amplification. However, their use to generate microwave quantum states still misses an experimental demonstration. In this letter, we report operation of a TWPA as a source of two-mode squeezed microwave radiation. We demonstrate broadband entanglement generation between two modes separated by up to 400 MHz by measuring logarithmic negativity between 0.27 and 0.51 and collective quadrature squeezing below the vacuum limit between 1.5 and 2.1 dB. This work opens interesting perspectives for the exploration of novel microwave photonics experiments with possible applications in quantum sensing and continuous variable quantum computing. △ Less

Submitted 19 April, 2022; v1 submitted 5 November, 2021; originally announced November 2021.

Comments: version accepted for publication

Journal ref: Phys. Rev. Lett. 128, 153603 (2022)

Efficient qubit measurement with a nonreciprocal microwave amplifier

Authors: F. Lecocq, L. Ranzani, G. A. Peterson, K. Cicak, X. Y. Jin, R. W. Simmonds, J. D. Teufel, J. Aumentado

Abstract: The act of observing a quantum object fundamentally perturbs its state, resulting in a random walk toward an eigenstate of the measurement operator. Ideally, the measurement is responsible for all dephasing of the quantum state. In practice, imperfections in the measurement apparatus limit or corrupt the flow of information required for quantum feedback protocols, an effect quantified by the measu… ▽ More The act of observing a quantum object fundamentally perturbs its state, resulting in a random walk toward an eigenstate of the measurement operator. Ideally, the measurement is responsible for all dephasing of the quantum state. In practice, imperfections in the measurement apparatus limit or corrupt the flow of information required for quantum feedback protocols, an effect quantified by the measurement efficiency. Here we demonstrate the efficient measurement of a superconducting qubit using a nonreciprocal parametric amplifier to directly monitor the microwave field of a readout cavity. By mitigating the losses between the cavity and the amplifier we achieve a measurement efficiency of $72\%$. The directionality of the amplifier protects the readout cavity and qubit from excess backaction caused by amplified vacuum fluctuations. In addition to providing tools for further improving the fidelity of strong projective measurement, this work creates a testbed for the experimental study of ideal weak measurements, and it opens the way towards quantum feedback protocols based on weak measurement such as state stabilization or error correction. △ Less

Submitted 7 December, 2020; v1 submitted 18 September, 2020; originally announced September 2020.

Journal ref: Phys. Rev. Lett. 126, 020502 (2021)

Control and readout of a superconducting qubit using a photonic link

Authors: F. Lecocq, F. Quinlan, K. Cicak, J. Aumentado, S. A. Diddams, J. D. Teufel

Abstract: Delivering on the revolutionary promise of a universal quantum computer will require processors with millions of quantum bits (qubits). In superconducting quantum processors, each qubit is individually addressed with microwave signal lines that connect room temperature electronics to the cryogenic environment of the quantum circuit. The complexity and heat load associated with the multiple coaxial… ▽ More Delivering on the revolutionary promise of a universal quantum computer will require processors with millions of quantum bits (qubits). In superconducting quantum processors, each qubit is individually addressed with microwave signal lines that connect room temperature electronics to the cryogenic environment of the quantum circuit. The complexity and heat load associated with the multiple coaxial lines per qubit limits the possible size of a processor to a few thousand qubits. Here we introduce a photonic link employing an optical fiber to guide modulated laser light from room temperature to a cryogenic photodetector, capable of delivering shot-noise limited microwave signals directly at millikelvin temperatures. By demonstrating high-fidelity control and readout of a superconducting qubit, we show that this photonic link can meet the stringent requirements of superconducting quantum information processing. Leveraging the low thermal conductivity and large intrinsic bandwidth of optical fiber enables efficient and massively multiplexed delivery of coherent microwave control pulses, providing a path towards a million-qubit universal quantum computer. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Journal ref: Nature 591, 575-579 (2021)

Direct observation of deterministic macroscopic entanglement

Authors: Shlomi Kotler, Gabriel A. Peterson, Ezad Shojaee, Florent Lecocq, Katarina Cicak, Alex Kwiatkowski, Shawn Geller, Scott Glancy, Emanuel Knill, Raymond W. Simmonds, José Aumentado, John D. Teufel

Abstract: Quantum entanglement of mechanical systems emerges when distinct objects move with such a high degree of correlation that they can no longer be described separately. Although quantum mechanics presumably applies to objects of all sizes, directly observing entanglement becomes challenging as masses increase, requiring measurement and control with a vanishingly small error. Here, using pulsed electr… ▽ More Quantum entanglement of mechanical systems emerges when distinct objects move with such a high degree of correlation that they can no longer be described separately. Although quantum mechanics presumably applies to objects of all sizes, directly observing entanglement becomes challenging as masses increase, requiring measurement and control with a vanishingly small error. Here, using pulsed electromechanics, we deterministically entangle two mechanical drumheads with masses of 70 pg. Through nearly quantum-limited measurements of the position and momentum quadratures of both drums, we perform quantum state tomography and thereby directly observe entanglement. Such entangled macroscopic systems are uniquely poised to serve in fundamental tests of quantum mechanics, enable sensing beyond the standard quantum limit, and function as long-lived nodes of future quantum networks. △ Less

Submitted 6 September, 2021; v1 submitted 11 April, 2020; originally announced April 2020.

Comments: 42 pages, 3 main figures, supplementary materials: text, 4 figures, 3 tables, 7 references

Journal ref: Science, Vol. 372, pp. 622-625 (2021)

Microwave measurement beyond the quantum limit with a nonreciprocal amplifier

Authors: F. Lecocq, L. Ranzani, G. A. Peterson, K. Cicak, A. Metelmann, S. Kotler, R. W. Simmonds, J. D. Teufel, J. Aumentado

Abstract: The measurement of a quantum system is often performed by encoding its state in a single observable of a light field. The measurement efficiency of this observable can be reduced by loss or excess noise on the way to the detector. Even a \textit{quantum-limited} detector that simultaneously measures a second non-commuting observable would double the output noise, therefore limiting the efficiency… ▽ More The measurement of a quantum system is often performed by encoding its state in a single observable of a light field. The measurement efficiency of this observable can be reduced by loss or excess noise on the way to the detector. Even a \textit{quantum-limited} detector that simultaneously measures a second non-commuting observable would double the output noise, therefore limiting the efficiency to $50\%$. At microwave frequencies, an ideal measurement efficiency can be achieved by noiselessly amplifying the information-carrying quadrature of the light field, but this has remained an experimental challenge. Indeed, while state-of-the-art Josephson-junction based parametric amplifiers can perform an ideal single-quadrature measurement, they require lossy ferrite circulators in the signal path, drastically decreasing the overall efficiency. In this paper, we present a nonreciprocal parametric amplifier that combines single-quadrature measurement and directionality without the use of strong external magnetic fields. We extract a measurement efficiency of $62_{-9}^{+17} \%$ that exceeds the quantum limit and that is not limited by fundamental factors. The amplifier can be readily integrated with superconducting devices, creating a path for ideal measurements of quantum bits and mechanical oscillators. △ Less

Submitted 3 April, 2020; v1 submitted 27 September, 2019; originally announced September 2019.

Comments: 12 pages, 9 figures

Journal ref: Phys. Rev. Applied 13, 044005 (2020)

Regularized Estimation and Feature Selection in Mixtures of Gaussian-Gated Experts Models

Authors: Faïcel Chamroukhi, Florian Lecocq, Hien D. Nguyen

Abstract: Mixtures-of-Experts models and their maximum likelihood estimation (MLE) via the EM algorithm have been thoroughly studied in the statistics and machine learning literature. They are subject of a growing investigation in the context of modeling with high-dimensional predictors with regularized MLE. We examine MoE with Gaussian gating network, for clustering and regression, and propose an $\ell_1$-… ▽ More Mixtures-of-Experts models and their maximum likelihood estimation (MLE) via the EM algorithm have been thoroughly studied in the statistics and machine learning literature. They are subject of a growing investigation in the context of modeling with high-dimensional predictors with regularized MLE. We examine MoE with Gaussian gating network, for clustering and regression, and propose an $\ell_1$-regularized MLE to encourage sparse models and deal with the high-dimensional setting. We develop an EM-Lasso algorithm to perform parameter estimation and utilize a BIC-like criterion to select the model parameters, including the sparsity tuning hyperparameters. Experiments conducted on simulated data show the good performance of the proposed regularized MLE compared to the standard MLE with the EM algorithm. △ Less

Submitted 12 September, 2019; originally announced September 2019.

Comments: Research School on Statistics and Data Science - RSSDS 2019

Ultrastrong parametric coupling between a superconducting cavity and a mechanical resonator

Authors: G. A. Peterson, S. Kotler, F. Lecocq, K. Cicak, X. Y. Jin, R. W. Simmonds, J. Aumentado, J. D. Teufel

Abstract: We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling rate not only exceeds the dissipation rates in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical inter… ▽ More We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling rate not only exceeds the dissipation rates in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical interaction induces a frequency splitting between the hybridized normal modes that reaches 88% of the bare mechanical frequency, limited by the fundamental parametric instability. The coupling also exceeds the mechanical thermal decoherence rate, enabling new applications in ultrafast quantum state transfer and entanglement generation. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Comments: 12 pages, 8 figures

Journal ref: Phys. Rev. Lett. 123, 247701 (2019)

Demonstration of efficient nonreciprocity in a microwave optomechanical circuit

Authors: G. A. Peterson, F. Lecocq, K. Cicak, R. W. Simmonds, J. Aumentado, J. D. Teufel

Abstract: The ability to engineer nonreciprocal interactions is an essential tool in modern communication technology as well as a powerful resource for building quantum networks. Aside from large reverse isolation, a nonreciprocal device suitable for applications must also have high efficiency (low insertion loss) and low output noise. Recent theoretical and experimental studies have shown that nonreciproca… ▽ More The ability to engineer nonreciprocal interactions is an essential tool in modern communication technology as well as a powerful resource for building quantum networks. Aside from large reverse isolation, a nonreciprocal device suitable for applications must also have high efficiency (low insertion loss) and low output noise. Recent theoretical and experimental studies have shown that nonreciprocal behavior can be achieved in optomechanical systems, but performance in these last two attributes has been limited. Here we demonstrate an efficient, frequency-converting microwave isolator based on the optomechanical interactions between electromagnetic fields and a mechanically compliant vacuum gap capacitor. We achieve simultaneous reverse isolation of more than 20 dB and insertion loss less than 1.5 dB over a bandwidth of 5 kHz. We characterize the nonreciprocal noise performance of the device, observing that the residual thermal noise from the mechanical environments is routed solely to the input of the isolator. Our measurements show quantitative agreement with a general coupled-mode theory. Unlike conventional isolators and circulators, these compact nonreciprocal devices do not require a static magnetic field, and they allow for dynamic control of the direction of isolation. With these advantages, similar devices could enable programmable, high-efficiency connections between disparate nodes of quantum networks, even efficiently bridging the microwave and optical domains. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. X 7, 031001 (2017)

Nonreciprocal microwave signal processing with a Field-Programmable Josephson Amplifier

Authors: F. Lecocq, L. Ranzani, G. A. Peterson, K. Cicak, R. W. Simmonds, J. D. Teufel, J. Aumentado

Abstract: We report on the design and implementation of a Field Programmable Josephson Amplifier (FPJA) - a compact and lossless superconducting circuit that can be programmed \textit{in situ} by a set of microwave drives to perform reciprocal and nonreciprocal frequency conversion and amplification. In this work we demonstrate four modes of operation: frequency conversion ($-0.5~\mathrm{dB}$ transmission,… ▽ More We report on the design and implementation of a Field Programmable Josephson Amplifier (FPJA) - a compact and lossless superconducting circuit that can be programmed \textit{in situ} by a set of microwave drives to perform reciprocal and nonreciprocal frequency conversion and amplification. In this work we demonstrate four modes of operation: frequency conversion ($-0.5~\mathrm{dB}$ transmission, $-30~\mathrm{dB}$ reflection), circulation ($-0.5~\mathrm{dB}$ transmission, $-30~\mathrm{dB}$ reflection, $30~\mathrm{dB}$ isolation), phase-preserving amplification (gain $>20~\mathrm{dB}$, $1~\mathrm{photon}$ of added noise) and directional phase-preserving amplification ($-10~\mathrm{dB}$ reflection, $18~\mathrm{dB}$ forward gain, $8~\mathrm{dB}$ reverse isolation, $1~\mathrm{photon}$ of added noise). The system exhibits quantitative agreement with theoretical prediction. Based on a gradiometric Superconducting Quantum Interference Device (SQUID) with Nb/Al-AlO$_x$/Nb Josephson junctions, the FPJA is first-order insensitive to flux noise and can be operated without magnetic shielding at low temperature. Due to its flexible design and compatibility with existing superconducting fabrication techniques, the FPJA offers a straightforward route toward on-chip integration with superconducting quantum circuits such as qubits or microwave optomechanical systems. △ Less

Submitted 5 December, 2016; originally announced December 2016.

Comments: 17 pages, 10 figures

Journal ref: Phys. Rev. Applied 7, 024028 (2017)

Sideband Cooling Beyond the Quantum Limit with Squeezed Light

Authors: Jeremy B. Clark, Florent Lecocq, Raymond W. Simmonds, Jose Aumentado, John D. Teufel

Abstract: Quantum fluctuations of the electromagnetic vacuum impose an observable quantum limit to the lowest temperatures that can be reached with conventional laser cooling techniques. As laser cooling experiments continue to bring massive mechanical systems to unprecedented temperatures, this quantum limit takes on increasingly greater practical importance in the laboratory. Fortunately, vacuum fluctuati… ▽ More Quantum fluctuations of the electromagnetic vacuum impose an observable quantum limit to the lowest temperatures that can be reached with conventional laser cooling techniques. As laser cooling experiments continue to bring massive mechanical systems to unprecedented temperatures, this quantum limit takes on increasingly greater practical importance in the laboratory. Fortunately, vacuum fluctuations are not immutable, and can be "squeezed" through the generation of entangled photon pairs. Here we propose and experimentally demonstrate that squeezed light can be used to sideband cool the motion of a macroscopic mechanical object below the quantum limit. To do so, we first cool a microwave cavity optomechanical system with a coherent state of light to within 15% of this limit. We then cool by more than 2 dB below the quantum limit using a squeezed microwave field generated by a Josephson Parametric Amplifier (JPA). From heterodyne spectroscopy of the mechanical sidebands, we measure a minimum thermal occupancy of 0.19 phonons. With this novel technique, even low frequency mechanical oscillators can in principle be cooled arbitrarily close to the motional ground state, enabling the exploration of quantum physics in larger, more massive systems. △ Less

Submitted 28 June, 2016; originally announced June 2016.

Comments: 4 figures and supplementary information

Observation of Strong Radiation Pressure Forces from Squeezed Light on a Mechanical Oscillator

Authors: Jeremy B. Clark, Florent Lecocq, Raymond W. Simmonds, José Aumentado, John D. Teufel

Abstract: Quantum enhanced sensing is a powerful technique in which nonclassical states are used to improve the sensitivity of a measurement. For enhanced mechanical displacement sensing, squeezed states of light have been shown to reduce the photon counting noise that limits the measurement noise floor. It has long been predicted, however, that suppressing the noise floor with squeezed light should produce… ▽ More Quantum enhanced sensing is a powerful technique in which nonclassical states are used to improve the sensitivity of a measurement. For enhanced mechanical displacement sensing, squeezed states of light have been shown to reduce the photon counting noise that limits the measurement noise floor. It has long been predicted, however, that suppressing the noise floor with squeezed light should produce an unavoidable increase in radiation pressure noise that drives the mechanical system. Such nonclassical radiation pressure forces have thus far been hidden by insufficient measurement strengths and residual thermal mechanical motion. Since the ultimate measurement sensitivity relies on the delicate balance between these two noise sources, the limits of the quantum enhancement have not been observed. Using a microwave cavity optomechanical system, we observe the nonclassical radiation pressure noise that necessarily accompanies any quantum enhancement of the measurement precision. By varying both the magnitude and phase of the squeezing, we optimize the fundamental trade-off between mechanical imprecision and backaction noise in accordance with the Heisenberg uncertainty principle. As the strength of the measurement is further increased, radiation pressure forces eventually dominate the mechanical motion. In this regime, the optomechanical interaction can be exploited as an efficient quantum nondemolition (QND) measurement of the amplitude fluctuations of the light field. By overwhelming mechanical thermal noise with radiation pressure by two orders of magnitude, we demonstrate a mechanically-mediated measurement of the squeezing with an effective homodyne efficiency of 94%. Thus, with strong radiation pressures forces, mechanical motion enhances the measurement of nonclassical light, just as nonclassical light enhances the measurement of the motion. △ Less

Submitted 11 January, 2016; originally announced January 2016.

Comments: 4 Figures

Journal ref: Nature Physics 12, 683-687 (2016)

Mechanically mediated microwave frequency conversion in the quantum regime

Authors: F. Lecocq, J. B. Clark, R. W. Simmonds, J. Aumentado, J. D. Teufel

Abstract: We report the observation of efficient and low-noise frequency conversion between two microwave modes, mediated by the motion of a mechanical resonator subjected to radiation pressure. We achieve coherent conversion of more than $10^{12}~\mathrm{photons/s}$ with a $95\mathrm{\%}$ efficiency and a $14~\mathrm{kHz}$ bandwidth. With less than $10^{-1}~\mathrm{photons \cdot s^{-1}\cdot Hz^{-1}}$ of ad… ▽ More We report the observation of efficient and low-noise frequency conversion between two microwave modes, mediated by the motion of a mechanical resonator subjected to radiation pressure. We achieve coherent conversion of more than $10^{12}~\mathrm{photons/s}$ with a $95\mathrm{\%}$ efficiency and a $14~\mathrm{kHz}$ bandwidth. With less than $10^{-1}~\mathrm{photons \cdot s^{-1}\cdot Hz^{-1}}$ of added noise, this optomechanical frequency converter is suitable for quantum state transduction. We show the ability to operate this converter as a tunable beam splitter, with direct applications for photon routing and communication through complex quantum networks. △ Less

Submitted 30 November, 2015; originally announced December 2015.

Journal ref: Phys. Rev. Lett. 116, 043601 (2016)

Quantum nondemolition measurement of a nonclassical state of a massive object

Authors: F. Lecocq, J. B. Clark, R. W. Simmonds, J. Aumentado, J. D. Teufel

Abstract: While quantum mechanics exquisitely describes the behavior of microscopic systems, one ongoing challenge is to explore its applicability to systems of larger size and mass. Unfortunately, quantum states of increasingly macroscopic objects are more easily corrupted by unintentional measurements from the classical environment. Additionally, even the intentional measurements from the observer can fur… ▽ More While quantum mechanics exquisitely describes the behavior of microscopic systems, one ongoing challenge is to explore its applicability to systems of larger size and mass. Unfortunately, quantum states of increasingly macroscopic objects are more easily corrupted by unintentional measurements from the classical environment. Additionally, even the intentional measurements from the observer can further perturb the system. In optomechanics, coherent light fields serve as the intermediary between the fragile mechanical states and our inherently classical world by exerting radiation pressure forces and extracting mechanical information. Here we engineer a microwave cavity optomechanical system to stabilize a nonclassical steady-state of motion while independently, continuously, and nondestructively monitoring it. By coupling the motion of an aluminum membrane to two microwave cavities, we separately prepare and measure a squeezed state of motion. We demonstrate a quantum nondemolition (QND) measurement of sub-vacuum mechanical quadrature fluctuations. The techniques developed here have direct applications in the areas of quantum-enhanced sensing and quantum information processing, and could be further extended to more complex quantum states. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. X 5, 041037 (2015)

Overwhelming thermomechanical motion with microwave radiation pressure shot noise

Authors: J. D. Teufel, F. Lecocq, R. W. Simmonds

Abstract: We measure the fundamental noise processes associated with a continuous linear position measurement of a micromechanical membrane incorporated in a microwave cavity optomechanical circuit. We observe the trade-off between the two fundamental sources of noises that enforce the standard quantum limit: the measurement imprecision and radiation-pressure backaction from photon shot noise. We demonstrat… ▽ More We measure the fundamental noise processes associated with a continuous linear position measurement of a micromechanical membrane incorporated in a microwave cavity optomechanical circuit. We observe the trade-off between the two fundamental sources of noises that enforce the standard quantum limit: the measurement imprecision and radiation-pressure backaction from photon shot noise. We demonstrate that the quantum backaction of the measurement can overwhelm the intrinsic thermal motion by 24 dB, entering a new regime for cavity optomechanical systems. △ Less

Submitted 21 August, 2015; originally announced August 2015.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett. 116, 013602 (2016)

Coherent-State Storage and Retrieval Between Superconducting Cavities Using Parametric Frequency Conversion

Authors: A. J. Sirois, M. A. Castellanos-Beltran, M. P. DeFeo, L. Ranzani, F. Q. Lecocq, R. W. Simmonds, J. D. Teufel, J. Aumentado

Abstract: In superconducting quantum information, machined aluminum superconducting cavities have proven to be a well-controlled, low-dissipation electromagnetic environment for quantum circuits such as qubits. They can possess large internal quality factors, $Q_{int}>10^8$, and present the possibility of storing quantum information for times far exceeding those of microfabricated circuits. However, in orde… ▽ More In superconducting quantum information, machined aluminum superconducting cavities have proven to be a well-controlled, low-dissipation electromagnetic environment for quantum circuits such as qubits. They can possess large internal quality factors, $Q_{int}>10^8$, and present the possibility of storing quantum information for times far exceeding those of microfabricated circuits. However, in order to be useful as a storage element, these cavities require a fast "read/write" mechanism--- in other words, they require tunable coupling between other systems of interest such as other cavity modes and qubits, as well as any associated readout hardware. In this work, we demonstrate these qualities in a simple dual cavity architecture in which a low-Q "readout" mode is parametrically coupled to a high-Q "storage" mode, allowing us to store and retrieve classical information. Specifically, we employ a flux-driven Josephson junction-based coupling scheme to controllably swap coherent states between two cavities, demonstrating full, sequenced control over the coupling rates between modes. △ Less

Submitted 9 March, 2015; originally announced March 2015.

Journal ref: 30 April 2015, Applied Physics Letters (Vol 106, Issue 17)

Resolving the vacuum fluctuations of an optomechanical system using an artificial atom

Authors: F. Lecocq, J. D. Teufel, J. Aumentado, R. W. Simmonds

Abstract: Heisenberg's uncertainty principle results in one of the strangest quantum behaviors: an oscillator can never truly be at rest. Even in its lowest energy state, at a temperature of absolute zero, its position and momentum are still subject to quantum fluctuations. Resolving these fluctuations using linear position measurements is complicated by the fact that classical noise can masquerade as quant… ▽ More Heisenberg's uncertainty principle results in one of the strangest quantum behaviors: an oscillator can never truly be at rest. Even in its lowest energy state, at a temperature of absolute zero, its position and momentum are still subject to quantum fluctuations. Resolving these fluctuations using linear position measurements is complicated by the fact that classical noise can masquerade as quantum noise. On the other hand, direct energy detection of the oscillator in its ground state makes it appear motionless. So how can we resolve quantum fluctuations? Here, we parametrically couple a micromechanical oscillator to a microwave cavity to prepare the system in its quantum ground state and then amplify the remaining vacuum fluctuations into real energy quanta. Exploiting a superconducting qubit as an artificial atom, we measure the photon/phonon-number distributions during these optomechanical interactions. This provides an essential non-linear resource to, first, verify the ground state preparation and second, reveal the quantum vacuum fluctuations of the macroscopic oscillator's motion. Our results further demonstrate the ability to control a long-lived mechanical oscillator using a non-Gaussian resource, directly enabling applications in quantum information processing and enhanced detection of displacement and forces. △ Less

Submitted 19 February, 2015; v1 submitted 2 September, 2014; originally announced September 2014.

Comments: 21 pages, 11 figures

Journal ref: Nature Physics 11, 635-639 (2015)

Tunable-Cavity QED with Phase Qubits

Authors: J. D. Whittaker, F. C. S. da Silva, M. S. Allman, F. Lecocq, K. Cicak, A. J. Sirois, J. D. Teufel, J. Aumentado, R. W. Simmonds

Abstract: We describe a tunable-cavity QED architecture with an rf SQUID phase qubit inductively coupled to a single-mode, resonant cavity with a tunable frequency that allows for both microwave readout of tunneling and dispersive measurements of the qubit. Dispersive measurement is well characterized by a three-level model, strongly dependent on qubit anharmonicity, qubit-cavity coupling and detuning. A tu… ▽ More We describe a tunable-cavity QED architecture with an rf SQUID phase qubit inductively coupled to a single-mode, resonant cavity with a tunable frequency that allows for both microwave readout of tunneling and dispersive measurements of the qubit. Dispersive measurement is well characterized by a three-level model, strongly dependent on qubit anharmonicity, qubit-cavity coupling and detuning. A tunable cavity frequency provides a way to strongly vary both the qubit-cavity detuning and coupling strength, which can reduce Purcell losses, cavity-induced dephasing of the qubit, and residual bus coupling for a system with multiple qubits. With our qubit-cavity system, we show that dynamic control over the cavity frequency enables one to avoid Purcell losses during coherent qubit evolutions and optimize state readout during qubit measurements. The maximum qubit decay time $T_1$ = 1.5 $μ$s is found to be limited by surface dielectric losses from a design geometry similar to planar transmon qubits. △ Less

Submitted 8 August, 2014; originally announced August 2014.

Comments: 17 pages, 10 figures

Journal ref: Physical Review B 90, 024513 (2014)

Coherent frequency conversion in a superconducting artificial atom with two internal degrees of freedom

Authors: Florent Lecocq, Ioan M. Pop, Iulian Matei, Etienne Dumur, A. K. Feofanov, Cécile Naud, Wiebke GUICHARD, Olivier Buisson

Abstract: By adding a large inductance in a dc-SQUID phase qubit loop, one decouples the junctions' dynamics and creates a superconducting artificial atom with two internal degrees of freedom. In addition to the usual symmetric plasma mode ({\it s}-mode) which gives rise to the phase qubit, an anti-symmetric mode ({\it a}-mode) appears. These two modes can be described by two anharmonic oscillators with eig… ▽ More By adding a large inductance in a dc-SQUID phase qubit loop, one decouples the junctions' dynamics and creates a superconducting artificial atom with two internal degrees of freedom. In addition to the usual symmetric plasma mode ({\it s}-mode) which gives rise to the phase qubit, an anti-symmetric mode ({\it a}-mode) appears. These two modes can be described by two anharmonic oscillators with eigenstates $\ket{n_{s}}$ and $\ket{n_{a}}$ for the {\it s} and {\it a}-mode, respectively. We show that a strong nonlinear coupling between the modes leads to a large energy splitting between states $\ket{0_{s},1_{a}}$ and $\ket{2_{s},0_{a}}$. Finally, coherent frequency conversion is observed via free oscillations between the states $\ket{0_{s},1_{a}}$ and $\ket{2_{s},0_{a}}$. △ Less

Submitted 19 January, 2012; originally announced January 2012.

Non-linear coupling between the two oscillation modes of a dc-SQUID

Authors: Florent Lecocq, Julien Claudon, Olivier Buisson, Pérola Milman

Abstract: We make a detailed theoretical description of the two-dimensional nature of a dc-SQUID, analyzing the coupling between its two orthogonal phase oscillation modes. While it has been shown that the mode defined as "longitudinal" can be initialized, manipulated and measured, so as to encode a quantum bit of information, the mode defined as "transverse" is usually repelled at high frequency and does n… ▽ More We make a detailed theoretical description of the two-dimensional nature of a dc-SQUID, analyzing the coupling between its two orthogonal phase oscillation modes. While it has been shown that the mode defined as "longitudinal" can be initialized, manipulated and measured, so as to encode a quantum bit of information, the mode defined as "transverse" is usually repelled at high frequency and does not interfere in the dynamics. We show that, using typical parameters of existing devices, the transverse mode energy can be made of the order of the longitudinal one. In this regime, we can observe a strong coupling between these modes, described by an Hamiltonian providing a wide range of interesting effects, such as conditional quantum operations and entanglement. This coupling also creates an atomic-like structure for the combined two mode states, with a V-like scheme. △ Less

Submitted 14 September, 2011; v1 submitted 12 September, 2011; originally announced September 2011.

Comments: 5 pages

Fabrication of stable and reproducible sub-micron tunnel junctions

Authors: I. M. Pop, T. Fournier, T. Crozes, F. Lecocq, I. Matei, B. Pannetier, O. Buisson, W. Guichard

Abstract: We have performed a detailed study of the time stability and reproducibility of sub-micron $Al/AlO_{x}/Al$ tunnel junctions, fabricated using standard double angle shadow evaporations. We have found that by aggressively cleaning the substrate before the evaporations, thus preventing any contamination of the junction, we obtained perfectly stable oxide barriers. We also present measurements on larg… ▽ More We have performed a detailed study of the time stability and reproducibility of sub-micron $Al/AlO_{x}/Al$ tunnel junctions, fabricated using standard double angle shadow evaporations. We have found that by aggressively cleaning the substrate before the evaporations, thus preventing any contamination of the junction, we obtained perfectly stable oxide barriers. We also present measurements on large ensembles of junctions which prove the reproducibility of the fabrication process. The measured tunnel resistance variance in large ensembles of identically fabricated junctions is in the range of only a few percents. Finally, we have studied the effect of different thermal treatments on the junction barrier. This is especially important for multiple step fabrication processes which imply annealing the junction. △ Less

Submitted 31 May, 2011; originally announced May 2011.

Comments: 4 pages, 3 figures

Experimental demonstration of Aharonov-Casher interference in a Josephson junction circuit

Authors: I. M. Pop, B. Douçot, L. Ioffe, I. Protopopov, F. Lecocq, I. Matei, O. Buisson, W. Guichard

Abstract: A neutral quantum particle with magnetic moment encircling a static electric charge acquires a quantum mechanical phase (Aharonov-Casher effect). In superconducting electronics the neutral particle becomes a fluxon that moves around superconducting islands connected by Josephson junctions. The full understanding of this effect in systems of many junctions is crucial for the design of novel quantum… ▽ More A neutral quantum particle with magnetic moment encircling a static electric charge acquires a quantum mechanical phase (Aharonov-Casher effect). In superconducting electronics the neutral particle becomes a fluxon that moves around superconducting islands connected by Josephson junctions. The full understanding of this effect in systems of many junctions is crucial for the design of novel quantum circuits. Here we present measurements and quantitative analysis of fluxon interference patterns in a six Josephson junction chain. In this multi-junction circuit the fluxon can encircle any combination of charges on five superconducting islands, resulting in a complex pattern. We compare the experimental results with predictions of a simplified model that treats fluxons as independent excitations and with the results of the full diagonalization of the quantum problem. Our results demonstrate the accuracy of the fluxon interference description and the quantum coherence of these arrays. △ Less

Submitted 20 April, 2011; originally announced April 2011.

Novel E-beam lithography technique for in-situ junction fabrication: the controlled undercut

Authors: Florent Lecocq, Cécile Naud, Ioan M. Pop, Zhi-Hui Peng, Iulian Matei, Thierry Crozes, Thierry Fournier, Wiebke Guichard, Olivier Buisson

Abstract: We present a novel shadow evaporation technique for the realization of junctions and capacitors. The design by E-beam lithography of strongly asymmetric undercuts on a bilayer resist enables in-situ fabrication of junctions and capacitors without the use of the well-known suspended bridge[1]. The absence of bridges increases the mechanical robustness of the resist mask as well as the accessible ra… ▽ More We present a novel shadow evaporation technique for the realization of junctions and capacitors. The design by E-beam lithography of strongly asymmetric undercuts on a bilayer resist enables in-situ fabrication of junctions and capacitors without the use of the well-known suspended bridge[1]. The absence of bridges increases the mechanical robustness of the resist mask as well as the accessible range of the junction size, from 0.01 to more than 10000 micron square. We have fabricated Al/AlOx/Al Josephson junctions, phase qubit and capacitors using a 100kV E- beam writer. Although this high voltage enables a precise control of the undercut, implementation using a conventional 20kV E-beam is also discussed. The phase qubit coherence times, extracted from spectroscopy resonance width, Rabi and Ramsey oscillations decay and energy relaxation measurements, are longer than the ones obtained in our previous samples realized by standard techniques. These results demonstrate the high quality of the junction obtained by this controlled undercut technique. △ Less

Submitted 2 February, 2011; v1 submitted 24 January, 2011; originally announced January 2011.

Comments: Submitted to Nanotechnology

Journal ref: Nanotechnology 22 (2011) 315302

Measurement of the effect of quantum phase-slips in a Josephson Junction chain

Authors: I. M. Pop, I. Protopopov, F. Lecocq, Z. Peng, B. Pannetier, O. Buisson, W. Guichard

Abstract: We investigate experimentally the physics of quantum phase slips in one-dimensional Josephson Junction chains. These quantum phase-slips are induced by quantum phase fluctuations occurring on single junctions of the chain. In our experiment we can tune the strength of these fluctuations as each chain junction is realized in form of a SQUID leading to tunable Josephson coupling. We determine the… ▽ More We investigate experimentally the physics of quantum phase slips in one-dimensional Josephson Junction chains. These quantum phase-slips are induced by quantum phase fluctuations occurring on single junctions of the chain. In our experiment we can tune the strength of these fluctuations as each chain junction is realized in form of a SQUID leading to tunable Josephson coupling. We determine the ground state of the chain via switching current measurements of the chain shunted by a large Josephson junction. Our results can be well fitted with a tight binding Hamiltonian taking into account quantum phase-slips. △ Less

Submitted 26 January, 2010; v1 submitted 12 December, 2009; originally announced December 2009.

Comments: 5 pages, 5 figures

Quantum dynamics in a camel-back potential of a dc SQUID

Authors: E. Hoskinson, F. Lecocq, N. Didier, A. Fay, F. W. J. Hekking, W. Guichard, R. Dolata, B. Mackrodt, A. B. Zorin, O. Buisson

Abstract: We investigate the quantum dynamics of a quadratic-quartic anharmonic oscillator formed by a potential well between two potential barriers. We realize this novel potential shape with a superconducting circuit comprised of a loop interrupted by two Josephson junctions, with near-zero current bias and flux bias near half a flux quantum. We investigate escape out of the central well, which can occu… ▽ More We investigate the quantum dynamics of a quadratic-quartic anharmonic oscillator formed by a potential well between two potential barriers. We realize this novel potential shape with a superconducting circuit comprised of a loop interrupted by two Josephson junctions, with near-zero current bias and flux bias near half a flux quantum. We investigate escape out of the central well, which can occur via tunneling through either of the two barriers, and find good agreement with a generalized double-path macroscopic quantum tunneling theory. We also demonstrate that this system exhibits an "optimal line" in current and flux bias space along which the oscillator, which can be operated as a phase qubit, is insensitive to decoherence due to low-frequency current fluctuations. △ Less

Submitted 14 October, 2008; originally announced October 2008.

Strong tunable coupling between a superconducting charge and phase qubit

Authors: A. Fay, E. Hoskinson, F. Lecocq, L. P. Lévy, F. W. J. Hekking, W. Guichard, O. Buisson

Abstract: We have realized a tunable coupling over a large frequency range between an asymmetric Cooper pair transistor (charge qubit) and a dc SQUID (phase qubit). Our circuit enables the independent manipulation of the quantum states of each qubit as well as their entanglement. The measurements of the charge qubit's quantum states is performed by resonant read-out via the measurement of the quantum stat… ▽ More We have realized a tunable coupling over a large frequency range between an asymmetric Cooper pair transistor (charge qubit) and a dc SQUID (phase qubit). Our circuit enables the independent manipulation of the quantum states of each qubit as well as their entanglement. The measurements of the charge qubit's quantum states is performed by resonant read-out via the measurement of the quantum states of the SQUID. The measured coupling strength is in agreement with an analytic theory including a capacitive and a tunable Josephson coupling between the two qubits. △ Less

Submitted 24 December, 2007; originally announced December 2007.

Comments: 5 pages

Journal ref: Physical Review Letters 100 (2008) 187003