-
Exploring non-Euclidean photonics: Pseudosphere microlaser
Authors:
H. Girin,
S. Bittner,
X. Checoury,
D. Decanini,
B. Dietz,
A. Grigis,
C. Lafargue,
J. Zyss,
C. Xu,
P. Sebbah,
M. Lebental
Abstract:
Classical and wave properties of microlasers with the shape of a truncated pseudosphere are investigated through experiments and numerical simulations. These pseudosphere microlasers are surface-like organic microlasers with constant negative curvature, which were fabricated with high optical quality by direct laser writing. It is shown that they behave, in many ways, similar to two-dimensional fl…
▽ More
Classical and wave properties of microlasers with the shape of a truncated pseudosphere are investigated through experiments and numerical simulations. These pseudosphere microlasers are surface-like organic microlasers with constant negative curvature, which were fabricated with high optical quality by direct laser writing. It is shown that they behave, in many ways, similar to two-dimensional flat disks, regardless of their different Gaussian curvature. We derive the monodromy matrices for geodesics on the pseudosphere and demonstrate that the periodic geodesics are marginally stable. Actually, due to the rotational symmetry, the pseudosphere is an integrable system.
△ Less
Submitted 9 May, 2025; v1 submitted 9 October, 2024;
originally announced October 2024.
-
Localized modes revealed in Random Lasers
Authors:
Bhupesh Kumar,
Ran Homri,
Priyanka Priyanka,
Santosh Maurya,
Melanie Lebental,
Patrick Sebbah
Abstract:
In sufficiently strong scattering media, light transport is suppressed and modes are exponentially localized. Anderson-like localized states have long been recognized as potential candidate for high-Q optical modes for low-threshold, cost effective random lasers. Operating in this regime remains however a challenge since Anderson localization is difficult to achieve in optics and nonlinear mode in…
▽ More
In sufficiently strong scattering media, light transport is suppressed and modes are exponentially localized. Anderson-like localized states have long been recognized as potential candidate for high-Q optical modes for low-threshold, cost effective random lasers. Operating in this regime remains however a challenge since Anderson localization is difficult to achieve in optics and nonlinear mode interaction compromise its observation. Here, we exhibit individually each lasing mode of a low-dimension solid-state random laser by applying a non-uniform optical gain. By undoing gain competition and cross-saturation, we demonstrate that all lasing modes are spatially localized. We find that selective excitation reduces significantly the lasing threshold while lasing efficiency is greatly improved. We show further how their spatial location is critical to boost laser power-efficiency. By efficiently suppressing spatial hole burning effect, we can turn on the optimally-outcoupled random lasing modes. Our demonstration opens the road to the exploration of linear and nonlinear mode interactions in the presence of gain, as well as disorder-engineering for laser applications.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Möbius Strip Microlasers: a Testbed for Non-Euclidean Photonics
Authors:
Yalei Song,
Yann Monceaux,
Stefan Bittner,
Kimhong Chao,
Héctor M. Reynoso de la Cruz,
Clément Lafargue,
Dominique Decanini,
Barbara Dietz,
Joseph Zyss,
Alain Grigis,
Xavier Checoury,
Melanie Lebental
Abstract:
We report on experiments with Möbius strip microlasers which were fabricated with high optical quality by direct laser writing. A Möbius strip, i.e., a band with a half twist, exhibits the fascinating property that it has a single nonorientable surface and a single boundary. We provide evidence that, in contrast to conventional ring or disk resonators, a Möbius strip cavity cannot sustain whisperi…
▽ More
We report on experiments with Möbius strip microlasers which were fabricated with high optical quality by direct laser writing. A Möbius strip, i.e., a band with a half twist, exhibits the fascinating property that it has a single nonorientable surface and a single boundary. We provide evidence that, in contrast to conventional ring or disk resonators, a Möbius strip cavity cannot sustain whispering gallery modes (WGM). Comparison between experiments and 3D finite difference time domain (FDTD) simulations reveals that the resonances are localized on periodic geodesics.
△ Less
Submitted 30 November, 2021; v1 submitted 24 November, 2020;
originally announced November 2020.
-
Selective Pumping of Localized States in a Disordered Active Medium
Authors:
Bhupesh Kumar,
Melanie Lebental,
Patrick Sebbah
Abstract:
Light scattering and localization in strongly scattering disordered systems is governed by the nature of the underlying eigenmodes, specially their spatial extension within the system. One of the main challenges in studying experimentally Anderson like localized states resides in the difficulty to excite these states independently and observe them individually anywhere in the sample. The modes mut…
▽ More
Light scattering and localization in strongly scattering disordered systems is governed by the nature of the underlying eigenmodes, specially their spatial extension within the system. One of the main challenges in studying experimentally Anderson like localized states resides in the difficulty to excite these states independently and observe them individually anywhere in the sample. The modes mutual interaction and their coupling to the sample boundaries makes it extremely challenging to isolate them spectrally and image them alone. In the presence of gain, random lasing occurs above threshold and lasing modes are excited. It was shown recently that shaping the intensity profile of the optical pump is a very effective way to control and force random lasing in singlemode regime at any desired emission wavelength. Active random media therefore offer a unique platform to select modes individually. By using pump shaping technique in a strongly scattering random laser, we successfully select localized lasing modes individually. Direct imaging of the light distribution within the random laser confirms the confined nature of the modes and enables us to elucidate long standing questions on the role of non-Hermiticity in active scattering media and the influence of nonlinearities on Anderson wave localization.
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Three-dimensional micro-billiard lasers: the square pyramid
Authors:
M. A. Guidry,
Y. Song,
C. Lafargue,
R. Sobczyk,
D. Decanini,
S. Bittner,
B. Dietz,
L. Huang,
J. Zyss,
A. Grigis,
M. Lebental
Abstract:
Microlasers are of ample interest for advancing quantum chaos studies at the intersection of wave dynamics and geometric optics in resonators. However, the mode structures of three-dimensional microlasers without rotational symmetry remain largely unexplored due to fabrication limitations. Previous studies of such cavities revealed lasing modes localized on periodic orbits exclusively confined to…
▽ More
Microlasers are of ample interest for advancing quantum chaos studies at the intersection of wave dynamics and geometric optics in resonators. However, the mode structures of three-dimensional microlasers without rotational symmetry remain largely unexplored due to fabrication limitations. Previous studies of such cavities revealed lasing modes localized on periodic orbits exclusively confined to a single plane. In this work, we report on the characterization of pyramidal, polymer-based microlasers and demonstrate that the lasing modes are localized on a genuine three-dimensional periodic orbit. The consequences on the laser features are further discussed, in particular stability and polarization issues.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Dynamical control of square microlaser emission via symmetry classes
Authors:
S. Bittner,
A. Loirette-Pelous,
C. Lafargue,
I. Gozhyk,
C. Ulysse,
B. Dietz,
J. Zyss,
M. Lebental
Abstract:
A major objective in photonics is to tailor the emission properties of microcavities which is usually achieved with specific cavity shapes. Yet, the dynamical change of the emission properties during operation would often be advantageous. The implementation of such a method is still a challenging issue. We present an effective procedure for the dynamical control of the emission lobes which relies…
▽ More
A major objective in photonics is to tailor the emission properties of microcavities which is usually achieved with specific cavity shapes. Yet, the dynamical change of the emission properties during operation would often be advantageous. The implementation of such a method is still a challenging issue. We present an effective procedure for the dynamical control of the emission lobes which relies on the selection of a specific coherent superposition of degenerate modes belonging to different symmetry classes. It is generally applicable to systems exhibiting pairs of degenerate modes. We explored it experimentally and analytically with organic square microlasers, which emit narrow lobes parallel to their sidewalls. By means of the pump polarization, emission lobes are switched on and off selectively with an extinction ratio better 1/50.
△ Less
Submitted 31 January, 2018; v1 submitted 29 July, 2017;
originally announced July 2017.
-
Waves and rays in plano-concave laser cavities, Part~II: a semiclassical approach
Authors:
A. Pascal,
S. Bittner,
B. Dietz,
A. Trabattoni,
C. Ulysse,
M. Romanelli,
M. Brunel,
J. Zyss,
M. Lebental
Abstract:
This second paper on the Fabry-Perot cavity presents a semi-classical approach, which means that we consider the transition from wave optics to geometrical optics. The basic concepts are the periodic orbits and their stability. For the plano-concave Fabry-Perot cavity in the paraxial approximation, the derivation of the trace formula demonstrates that the spectrum is based only on the axial period…
▽ More
This second paper on the Fabry-Perot cavity presents a semi-classical approach, which means that we consider the transition from wave optics to geometrical optics. The basic concepts are the periodic orbits and their stability. For the plano-concave Fabry-Perot cavity in the paraxial approximation, the derivation of the trace formula demonstrates that the spectrum is based only on the axial periodic orbit and its repetitions. Experiments with micro-lasers illustrate the relation to periodic orbits. The methods presented in this paper are not limited to laser cavities and can be applied to a large range of wave systems.
△ Less
Submitted 31 December, 2016;
originally announced January 2017.
-
Origin of emission from square-shaped organic microlasers
Authors:
S. Bittner,
C. Lafargue,
I. Gozhyk,
N. Djellali,
L. Milliet,
D. T. Hickox-Young,
C. Ulysse,
D. Bouche,
R. Dubertrand,
E. Bogomolny,
J. Zyss,
M. Lebental
Abstract:
The emission from open cavities with non-integrable features remains a challenging problem of practical as well as fundamental relevance. Square-shaped dielectric microcavities provide a favorable case study with generic implications for other polygonal resonators. We report on a joint experimental and theoretical study of square-shaped organic microlasers exhibiting a far-field emission that is s…
▽ More
The emission from open cavities with non-integrable features remains a challenging problem of practical as well as fundamental relevance. Square-shaped dielectric microcavities provide a favorable case study with generic implications for other polygonal resonators. We report on a joint experimental and theoretical study of square-shaped organic microlasers exhibiting a far-field emission that is strongly concentrated in the directions parallel to the side walls of the cavity. A semiclassical model for the far-field distributions is developed that is in agreement with even fine features of the experimental findings. Comparison of the model calculations with the experimental data allows the precise identification of the lasing modes and their emission mechanisms, providing strong support for a physically intuitive ray-dynamical interpretation. Special attention is paid to the role of diffraction and the finite side length.
△ Less
Submitted 4 April, 2016; v1 submitted 28 January, 2016;
originally announced January 2016.
-
Unidirectional light emission from low-index polymer microlasers
Authors:
M. Schermer,
S. Bittner,
G. Singh,
C. Ulysse,
M. Lebental,
J. Wiersig
Abstract:
We report on experiments with deformed polymer microlasers that have a low refractive index and exhibit unidirectional light emission. We demonstrate that the highly directional emission is due to transport of light rays along the unstable manifold of the chaotic saddle in phase space. Experiments, ray-tracing simulations, and mode calculations show very good agreement.
We report on experiments with deformed polymer microlasers that have a low refractive index and exhibit unidirectional light emission. We demonstrate that the highly directional emission is due to transport of light rays along the unstable manifold of the chaotic saddle in phase space. Experiments, ray-tracing simulations, and mode calculations show very good agreement.
△ Less
Submitted 12 March, 2015; v1 submitted 5 December, 2014;
originally announced December 2014.
-
Localized lasing modes of triangular organic microlasers
Authors:
C. Lafargue,
M. Lebental,
A. Grigis,
C. Ulysse,
I. Gozhyk,
N. Djellali,
J. Zyss,
S. Bittner
Abstract:
We investigated experimentally the ray-wave correspondence in organic microlasers of various triangular shapes. Triangular billiards are of interest since they are the simplest cases of polygonal billiards and the existence and properties of periodic orbits in triangles are not yet fully understood. The microlasers with symmetric shapes that were investigated exhibited states localized on simple p…
▽ More
We investigated experimentally the ray-wave correspondence in organic microlasers of various triangular shapes. Triangular billiards are of interest since they are the simplest cases of polygonal billiards and the existence and properties of periodic orbits in triangles are not yet fully understood. The microlasers with symmetric shapes that were investigated exhibited states localized on simple periodic orbits, and their lasing characteristics like spectra and far-field distributions could be well explained by the properties of the periodic orbits. Furthermore, asymmetric triangles that do not feature simple periodic orbits were studied. Their lasing properties were found to be more complicated and could not be explained by periodic orbits.
△ Less
Submitted 27 November, 2014; v1 submitted 28 March, 2014;
originally announced March 2014.
-
Gain properties of dye-doped polymer thin films
Authors:
I. Gozhyk,
M. Boudreau,
H. Rabbani Haghighi,
N. Djellali,
S. Forget,
S. Chenais,
C. Ulysse,
A. Brosseau,
S. Gauvin,
J. Zyss,
M. Lebental
Abstract:
Hybrid pumping appears as a promising compromise in order to reach the much coveted goal of an electrically pumped organic laser. In such configuration the organic material is optically pumped by an electrically pumped inorganic device on chip. This engineering solution requires therefore an optimization of the organic gain medium under optical pumping. Here, we report a detailed study of the gain…
▽ More
Hybrid pumping appears as a promising compromise in order to reach the much coveted goal of an electrically pumped organic laser. In such configuration the organic material is optically pumped by an electrically pumped inorganic device on chip. This engineering solution requires therefore an optimization of the organic gain medium under optical pumping. Here, we report a detailed study of the gain features of dye-doped polymer thin films. In particular we introduce the gain efficiency $K$, in order to facilitate comparison between different materials and experimental conditions. The gain efficiency was measured with various setups (pump-probe amplification, variable stripe length method, laser thresholds) in order to study several factors which modify the actual gain of a layer, namely the confinement factor, the pump polarization, the molecular anisotropy, and the re-absorption. For instance, for a 600 nm thick 5 wt\% DCM doped PMMA layer, the different experimental approaches give a consistent value $K\simeq$ 80 cm.MW$^{-1}$. On the contrary, the usual model predicting the gain from the characteristics of the material leads to an overestimation by two orders of magnitude, which raises a serious problem in the design of actual devices. In this context, we demonstrate the feasibility to infer the gain efficiency from the laser threshold of well-calibrated devices. Besides, temporal measurements at the picosecond scale were carried out to support the analysis.
△ Less
Submitted 15 July, 2015; v1 submitted 28 March, 2014;
originally announced March 2014.
-
Three-Dimensional Organic Microlasers with Low Lasing Thresholds Fabricated by Multiphoton Lithography
Authors:
Vincent W. Chen,
Nina Sobeshchuk,
Clement Lafargue,
Eric S. Mansfield,
Jeannie Yom,
Luke Johnstone,
Joel M. Hales,
Stefan Bittner,
Severin Charpignon,
David Ulbricht,
Joseph Lautru,
Igor Denisyuk,
Joseph Zyss,
Joseph W. Perry,
Melanie Lebental
Abstract:
Cuboid-shaped organic microcavities containing a pyrromethene laser dye and supported upon a photonic crystal have been investigated as an approach to reducing the lasing threshold of the cavities. Multiphoton lithography facilitated fabrication of the cuboid cavities directly on the substrate or on the decoupling structure, while similar structures were fabricated on the substrate by UV lithograp…
▽ More
Cuboid-shaped organic microcavities containing a pyrromethene laser dye and supported upon a photonic crystal have been investigated as an approach to reducing the lasing threshold of the cavities. Multiphoton lithography facilitated fabrication of the cuboid cavities directly on the substrate or on the decoupling structure, while similar structures were fabricated on the substrate by UV lithography for comparison. Significant reduction of the lasing threshold by a factor of ~30 has been observed for cavities supported by the photonic crystal relative to those fabricated on the substrate. The lasing mode spectra of the cuboid microresonators provide strong evidence showing that the lasing modes are localized in the horizontal plane, with the shape of an inscribed diamond.
△ Less
Submitted 2 April, 2014; v1 submitted 26 March, 2014;
originally announced March 2014.
-
Three-dimensional emission from organic Fabry-Perot microlasers
Authors:
Clément Lafargue,
Stefan Bittner,
Sergii Lozenko,
Joseph Lautru,
Joseph Zyss,
Christian Ulysse,
Christophe Cluzel,
Mélanie Lebental
Abstract:
We measured the far-field emission patterns in three dimensions of flat organic dye microlasers using a solid angle scanner. Polymer-based microcavities of ribbon shape (i.e., Fabry-Perot type) were investigated. Out of plane emission from the cavities was observed, with significant differences for the two cases of resonators either fully supported by the substrate or sustained by a pedestal. In b…
▽ More
We measured the far-field emission patterns in three dimensions of flat organic dye microlasers using a solid angle scanner. Polymer-based microcavities of ribbon shape (i.e., Fabry-Perot type) were investigated. Out of plane emission from the cavities was observed, with significant differences for the two cases of resonators either fully supported by the substrate or sustained by a pedestal. In both cases, the emission diagrams are accounted for by a model combining diffraction at the cavity edges and reflections from the substrate.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
An insight into polarization states of solid-state organic lasers
Authors:
I. Gozhyk,
G. Clavier,
R. Meallet-Renault,
M. Dvorko,
R. Pansu,
J. -F. Audibert,
A. Brosseau,
C. Lafargue,
V. Tsvirkun,
S. Lozenko,
S. Forget,
S. Chenais,
C. Ulysse,
J. Zyss,
M. Lebental
Abstract:
The polarization states of lasers are crucial issues both for practical applications and fundamental research. In general, they depend in a combined manner on the properties of the gain material and on the structure of the electromagnetic modes. In this paper, we address this issue in the case of solid-state organic lasers, a technology which enables to vary independently gain and mode properties.…
▽ More
The polarization states of lasers are crucial issues both for practical applications and fundamental research. In general, they depend in a combined manner on the properties of the gain material and on the structure of the electromagnetic modes. In this paper, we address this issue in the case of solid-state organic lasers, a technology which enables to vary independently gain and mode properties. Different kinds of resonators are investigated: in-plane micro-resonators with Fabry-Perot, square, pentagon, stadium, disk, and kite shapes, and external vertical resonators. The degree of polarization P is measured in each case. It is shown that although TE modes prevail generally (P>0), kite-shaped micro-laser generates negative values for P, i.e. a flip of the dominant polarization which becomes mostly TM polarized. We at last investigated two degrees of freedom that are available to tailor the polarization of organic lasers, in addition to the pump polarization and the resonator geometry: upon using resonant energy transfer (RET) or upon pumping the laser dye to an higher excited state. We then demonstrate that significantly lower P factors can be obtained.
△ Less
Submitted 19 October, 2012; v1 submitted 20 July, 2012;
originally announced July 2012.
-
Trace formula for dielectric cavities II: Regular, pseudo-integrable, and chaotic examples
Authors:
E. Bogomolny,
N. Djellali,
R. Dubertrand,
I. Gozhyk,
M. Lebental,
C. Schmit,
C. Ulysse,
J. Zyss
Abstract:
Dielectric resonators are open systems particularly interesting due to their wide range of applications in optics and photonics. In a recent paper [PRE, vol. 78, 056202 (2008)] the trace formula for both the smooth and the oscillating parts of the resonance density was proposed and checked for the circular cavity. The present paper deals with numerous shapes which would be integrable (square, rect…
▽ More
Dielectric resonators are open systems particularly interesting due to their wide range of applications in optics and photonics. In a recent paper [PRE, vol. 78, 056202 (2008)] the trace formula for both the smooth and the oscillating parts of the resonance density was proposed and checked for the circular cavity. The present paper deals with numerous shapes which would be integrable (square, rectangle, and ellipse), pseudo-integrable (pentagon) and chaotic (stadium), if the cavities were closed (billiard case). A good agreement is found between the theoretical predictions, the numerical simulations, and experiments based on organic micro-lasers.
△ Less
Submitted 25 May, 2011; v1 submitted 28 September, 2010;
originally announced September 2010.
-
Red-emitting fluorescent Organic Light emitting Diodes with low sensitivity to self-quenching
Authors:
Sebastien Forget,
Sebastien Chenais,
Denis Tondelier,
Bernard Geffroy,
Iryna Gozhyk,
Mélanie Lebental,
Elena Ishow
Abstract:
Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various…
▽ More
Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various doping levels of FVIN into Alq3, and show a remarkably stable external quantum efficiency of 1.5% for doping rates ranging from 5% up to 40%, which strongly relaxes the technological constraints on the doping accuracy. An efficiency of 1% is obtained for a pure undoped active region, along with deep red emission (x=0.6; y=0.35 CIE coordinates). A comparison of FVIN with the archetypal DCM dye is presented in an identical multilayer OLED structure.
△ Less
Submitted 23 September, 2010;
originally announced September 2010.
-
Diffusion of triplet excitons in an operational Organic Light Emitting Diode
Authors:
M. Lebental,
H. Choukri,
S. Chénais,
S. Forget,
A. Siove,
B. Geffroy,
E. Tutis
Abstract:
Measurements of the diffusion length L for triplet excitons in small molecular-weight organic semiconductors are commonly carried out using a technique in which a phosphorescent-doped probe layer is set in the vicinity of a supposed exciton generation zone. However, analyses commonly used to retrieve $L$ ignore microcavity effects that may induce a strong modulation of the emitted light as the p…
▽ More
Measurements of the diffusion length L for triplet excitons in small molecular-weight organic semiconductors are commonly carried out using a technique in which a phosphorescent-doped probe layer is set in the vicinity of a supposed exciton generation zone. However, analyses commonly used to retrieve $L$ ignore microcavity effects that may induce a strong modulation of the emitted light as the position of the exciton probe is shifted. The present paper investigates in detail how this technique may be improved to obtain more accurate results for L. The example of 4,4'-bis(carbazol-9-yl)1,1'-biphenyl (CBP) is taken, for which a triplet diffusion length of L=16 +/- 4 nm (at 3 mA/cm2) is inferred from experiments. The influence of triplet-triplet annihilation, responsible for an apparent decrease of L at high current densities, is theoretically investigated, as well as the 'invasiveness' of the thin probe layer on the exciton distribution. The interplay of microcavity effects and direct recombinations is demonstrated experimentally with the archetypal trilayer structure [N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)]-4,4'-diaminobiphenyl (NPB)/CBP/ 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (named bathocuproine, BCP). It is shown that in this device holes do cross the NPB/CBP junction, without the assistance of electrons and despite the high energetic barrier imposed by the shift between the HOMO levels. The use of the variable-thickness doped layer technique in this case is then discussed. Finally, some guidelines are given for improving the measure of the diffusion length of triplet excitons in operational OLEDs, applicable to virtually any small molecular-weight material.
△ Less
Submitted 18 February, 2009;
originally announced February 2009.
-
Circular dielectric cavity and its deformations
Authors:
R. Dubertrand,
E. Bogomolny,
N. Djellali,
M. Lebental,
C. Schmit
Abstract:
The construction of perturbation series for slightly deformed dielectric circular cavity is discussed in details. The obtained formulae are checked on the example of cut disks. A good agreement is found with direct numerical simulations and far-field experiments.
The construction of perturbation series for slightly deformed dielectric circular cavity is discussed in details. The obtained formulae are checked on the example of cut disks. A good agreement is found with direct numerical simulations and far-field experiments.
△ Less
Submitted 25 September, 2007; v1 submitted 29 August, 2007;
originally announced August 2007.
-
Inferring periodic orbits from spectra of simple shaped micro-lasers
Authors:
M. Lebental,
N. Djellali,
C. Arnaud,
J. -S. Lauret,
J. Zyss,
R. Dubertrand,
C. Schmit,
E. Bogomolny
Abstract:
Dielectric micro-cavities are widely used as laser resonators and characterizations of their spectra are of interest for various applications. We experimentally investigate micro-lasers of simple shapes (Fabry-Perot, square, pentagon, and disk). Their lasing spectra consist mainly of almost equidistant peaks and the distance between peaks reveals the length of a quantized periodic orbit. To meas…
▽ More
Dielectric micro-cavities are widely used as laser resonators and characterizations of their spectra are of interest for various applications. We experimentally investigate micro-lasers of simple shapes (Fabry-Perot, square, pentagon, and disk). Their lasing spectra consist mainly of almost equidistant peaks and the distance between peaks reveals the length of a quantized periodic orbit. To measure this length with a good precision, it is necessary to take into account different sources of refractive index dispersion. Our experimental and numerical results agree with the superscar model describing the formation of long-lived states in polygonal cavities. The limitations of the two-dimensional approximation are briefly discussed in connection with micro-disks.
△ Less
Submitted 15 June, 2007; v1 submitted 16 April, 2007;
originally announced April 2007.
-
Directional emission of stadium-shaped micro-lasers
Authors:
M. Lebental,
J. -S. Lauret,
J. Zyss,
C. Schmit,
E. Bogomolny
Abstract:
The far-field emission of two dimensional (2D) stadium-shaped dielectric cavities is investigated. Micro-lasers with such shape present a highly directional emission. We provide experimental evidence of the dependance of the emission directionality on the shape of the stadium, in good agreement with ray numerical simulations. We develop a simple geometrical optics model which permits to explain…
▽ More
The far-field emission of two dimensional (2D) stadium-shaped dielectric cavities is investigated. Micro-lasers with such shape present a highly directional emission. We provide experimental evidence of the dependance of the emission directionality on the shape of the stadium, in good agreement with ray numerical simulations. We develop a simple geometrical optics model which permits to explain analytically main observed features. Wave numerical calculations confirm the results.
△ Less
Submitted 1 September, 2006;
originally announced September 2006.
