-
Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe
Authors:
Alexandra B. Artusio-Glimpse,
David A. Long,
Sean M. Bresler,
Nikunjkumar Prajapati,
Dangka Shylla,
Andrew P. Rotunno,
Matthew T. Simons,
Samuel Berweger,
Noah Schlossberger,
Thomas W. LeBrun,
Christopher L. Holloway
Abstract:
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Bound-state-in-continuum guided modes in a multilayer electro-optically active photonic integrated circuit platform
Authors:
Kyunghun Han,
Thomas W. LeBrun,
Vladimir A. Aksyuk
Abstract:
Bound states in the continuum (BICs) are localized states existing within a continuous spectrum of delocalized waves. Emerging multilayer photonic integrated circuit (PIC) platforms allow implementation of low index 1D guided modes within a high-index 2D slab mode continuum; however, conventional wisdom suggests that this always leads to large radiation losses. Here we demonstrate low-loss BIC gui…
▽ More
Bound states in the continuum (BICs) are localized states existing within a continuous spectrum of delocalized waves. Emerging multilayer photonic integrated circuit (PIC) platforms allow implementation of low index 1D guided modes within a high-index 2D slab mode continuum; however, conventional wisdom suggests that this always leads to large radiation losses. Here we demonstrate low-loss BIC guided modes for multiple mode polarizations and spatial orders in single- and multi-ridge low-index waveguides within a two-layer heterogeneously integrated electro-optically active photonic platform. The transverse electric (TE) polarized quasi-BIC guided mode with low, <1.4 dB/cm loss enables a Mach-Zehnder electro-optic amplitude modulator comprising a single straight Si3N4 ridge waveguide integrated with a continuous LiNbO3 slab layer. The abrupt optical transitions at the edges of the slab function as compact and efficient directional couplers eliminating the need for additional components. The modulator exhibits a low insertion loss of 2.3 dB and a high extinction ratio of 25 dB. The developed general theoretical model may enable innovative BIC-based approaches for important PIC functions, such as agile spectral filtering and switching, and may suggest new photonic architectures for quantum and neural network applications based on controlled interactions between multiple guided and delocalized modes.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Low-power, agile electro-optic frequency comb spectrometer for integrated sensors
Authors:
Kyunghun Han,
David A. Long,
Sean M. Bresler,
Junyeob Song,
Yiliang Bao,
Benjamin J. Reschovsky,
Kartik Srinivasan,
Jason J. Gorman,
Vladimir A. Aksyuk,
Thomas W. LeBrun
Abstract:
Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceler…
▽ More
Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing.
△ Less
Submitted 16 April, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
GPU enabled real-time optical frequency comb spectroscopy and photonic readout
Authors:
Sean M. Bresler,
David A. Long,
Benjamin J. Reschovsky,
Yiliang. Bao,
Thomas W. LeBrun
Abstract:
We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is…
▽ More
We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is readily amenable to both self-heterodyne and dual comb spectrometers for molecular spectroscopy as well as photonic readout where the approach's agility, speed, and simplicity are expected to enable future improvements and applications.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
High accuracy, high dynamic range optomechanical accelerometry enabled by dual comb spectroscopy
Authors:
D. A. Long,
J. R. Stroud,
B. J. Reschovsky,
Y. Bao,
F. Zhou,
S. M. Bresler,
T. W. LeBrun,
D. F. Plusquellic,
J. J. Gorman
Abstract:
Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at acc…
▽ More
Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at accelerations up to 24 g (236 m/s$^2$). With this approach, we have achieved a displacement sensitivity of 3 fm/Hz$^{1/2}$, a measurement rate of 100 kHz, and a dynamic range of 3.9 $\times$ 10$^5$ which is the highest we are aware of for a microfabricated cavity optomechanical sensor. In addition, comparisons of our optomechanical sensor coupled directly to a commercial reference accelerometer show agreement at the 0.5% level, a value which is limited by the reference's reported uncertainty. Further, the methods described herein are not limited to accelerometry but rather can be readily applied to nearly any optomechanical sensor where the combination of high speed, dynamic range, and sensitivity is expected to be enabling.
△ Less
Submitted 10 October, 2023; v1 submitted 30 June, 2023;
originally announced June 2023.
-
Collision-resolved pressure sensing
Authors:
Daniel S. Barker,
Daniel Carney,
Thomas W. LeBrun,
David C. Moore,
Jacob M. Taylor
Abstract:
Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanome…
▽ More
Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanomechanical devices operated with impulse readout sensitivity around the ``standard quantum limit'' to sense ultra-low gas pressures by directly counting the individual collisions of gas particles on a sensor. We illustrate this in two paradigmatic model systems: an optically levitated nanobead and a tethered membrane system in a phononic bandgap shield.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
High dynamic range electro-optic dual-comb interrogation of optomechanical sensors
Authors:
D. A. Long,
B. J. Reschovsky,
T. W. LeBrun,
J. J. Gorman,
J. T. Hodges,
D. F. Plusquellic,
J. R. Stroud
Abstract:
An interleaved, chirped electro-optic dual comb system is demonstrated for rapid, high dynamic range measurements of cavity optomechanical sensors. This approach allows for the cavity displacements to be interrogated at measurement times as fast as 10 μs over ranges far larger than can be achieved with alternative methods. While the performance of this novel readout approach is evaluated with an o…
▽ More
An interleaved, chirped electro-optic dual comb system is demonstrated for rapid, high dynamic range measurements of cavity optomechanical sensors. This approach allows for the cavity displacements to be interrogated at measurement times as fast as 10 μs over ranges far larger than can be achieved with alternative methods. While the performance of this novel readout approach is evaluated with an optomechanical accelerometer, this method is applicable to a wide range of applications including temperature, pressure, and humidity sensing as well as acoustics and molecular spectroscopy.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
MAQRO -- BPS 2023 Research Campaign Whitepaper
Authors:
Rainer Kaltenbaek,
Markus Arndt,
Markus Aspelmeyer,
Peter F. Barker,
Angelo Bassi,
James Bateman,
Alessio Belenchia,
Joel Bergé,
Sougato Bose,
Claus Braxmaier,
Bruno Christophe,
Garrett D. Cole,
Catalina Curceanu,
Animesh Datta,
Maxime Debiossac,
Uroš Delić,
Lajos Diósi,
Andrew A. Geraci,
Stefan Gerlich,
Christine Guerlin,
Gerald Hechenblaikner,
Antoine Heidmann,
Sven Herrmann,
Klaus Hornberger,
Ulrich Johann
, et al. (21 additional authors not shown)
Abstract:
The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed t…
▽ More
The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. These new technologies will open up the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Intrinsically accurate sensing with an optomechanical accelerometer
Authors:
Benjamin J. Reschovsky,
David A. Long,
Feng Zhou,
Yiliang Bao,
Richard A. Allen,
Thomas W. LeBrun,
Jason J. Gorman
Abstract:
We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceab…
▽ More
We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceable displacement measurements. The resulting intrinsic accuracy was evaluated over a wide frequency range by comparing to a primary vibration calibration system and local gravity. The average agreement was found to be 2.1 % for the calibration system between 0.1 kHz and 15 kHz and better than 0.2 % for the static acceleration. This capability has the potential to replace costly external calibrations and improve the accuracy of inertial guidance systems and remotely deployed accelerometers. Due to the fundamental nature of the intrinsic accuracy approach, it could be extended to other optomechanical transducers, including force and pressure sensors.
△ Less
Submitted 23 May, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Electro-optic frequency combs for rapid interrogation in cavity optomechanics
Authors:
D. A. Long,
B. J. Reschovsky,
F. Zhou,
Y. Bao,
T. W. LeBrun,
J. J. Gorman
Abstract:
Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the…
▽ More
Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the present approach allows rapid, parallel measurements of full optical cavity modes, large dynamic range of sensor displacement, and acquisition across a wide frequency range between DC and 500 kHz. In addition to being well suited to measurements of cavity optomechanical sensors, this optical frequency comb-based approach can be utilized for interrogation in a wide range of physical and chemical sensors.
△ Less
Submitted 31 March, 2022; v1 submitted 14 August, 2020;
originally announced August 2020.
-
Broadband Optomechanical Sensing at the Thermodynamic Limit
Authors:
Feng Zhou,
Yiliang Bao,
Ramgopal Madugani,
David A. Long,
Jason J. Gorman,
Thomas W. LeBrun
Abstract:
Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theor…
▽ More
Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theorem. While the limiting sensitivity can be increased by increasing the mass or reducing the damping of the mechanical sensing element, these design tradeoffs lead to larger detectors or limit the range of mechanical frequencies that can be measured, excluding the bandwidth requirements for many real-world applications. We report on a microfabricated optomechanical sensing platform based on a Fabry-Perot microcavity and show that when operating as an accelerometer it can achieve nearly ideal broadband performance at the thermodynamic limit (Brownian motion of the proof mass) with the highest sensitivity reported to date over a wide frequency range ($314\,nm \cdot s^{-2}/\sqrt{Hz}$ over 6.8 kHz). This approach is applicable to a range of measurements from pressure and force sensing to seismology and gravimetry, including searches for new physics such as non-Newtonian gravity or dark matter.
△ Less
Submitted 30 July, 2020;
originally announced August 2020.
