-
Quasi-monoenergetic multi-GeV electron acceleration in a plasma waveguide
Authors:
Ronan Lahaye,
Kosta Oubrerie,
Olena Kononenko,
Julien Gautier,
Igor A. Andriyash,
Cedric Thaury
Abstract:
Laser-plasma accelerators present a promising alternative to conventional accelerators. To fully exploit the extreme amplitudes of the plasma fields and produce high-quality beams, precise control over electron injection into the accelerating structure is required, along with effective laser pulse guiding to extend the acceleration length. Recent studies have demonstrated efficient guiding and acc…
▽ More
Laser-plasma accelerators present a promising alternative to conventional accelerators. To fully exploit the extreme amplitudes of the plasma fields and produce high-quality beams, precise control over electron injection into the accelerating structure is required, along with effective laser pulse guiding to extend the acceleration length. Recent studies have demonstrated efficient guiding and acceleration using hydrodynamic optically field-ionized (OFI) plasma channels. This guiding technique has also been combined with controlled electron injection to produce high-quality electron beams at the GeV level using a 50 TW laser. The present work extends these results to higher laser energies, demonstrating the generation of quasi-monoenergetic electron beams with peak energies exceeding 2 GeV, for a PW-class laser.
△ Less
Submitted 28 March, 2025;
originally announced March 2025.
-
In Flight Boresight Rectification for Lightweight Airborne Pushbroom Imaging Spectrometry
Authors:
Julien Yuuki Burkhard,
Jesse Ray Murray Lahaye,
Laurent Valentin Jospin,
Jan Skaloud
Abstract:
Hyperspectral cameras have recently been miniaturized for operation on lightweight airborne platforms such as UAV or small aircraft. Unlike frame cameras (RGB or Multispectral), many hyperspectral sensors use a linear array or 'push-broom' scanning design. This design presents significant challenges for image rectification and the calibration of the intrinsic and extrinsic camera parameters. Typic…
▽ More
Hyperspectral cameras have recently been miniaturized for operation on lightweight airborne platforms such as UAV or small aircraft. Unlike frame cameras (RGB or Multispectral), many hyperspectral sensors use a linear array or 'push-broom' scanning design. This design presents significant challenges for image rectification and the calibration of the intrinsic and extrinsic camera parameters. Typically, methods employed to address such tasks rely on a precise GPS/INS estimate of the airborne platform trajectory and a detailed terrain model. However, inaccuracies in the trajectory or surface model information can introduce systematic errors and complicate geometric modeling which ultimately degrade the quality of the rectification. To overcome these challenges, we propose a method for tie point extraction and camera calibration for 'push-broom' hyperspectral sensors using only the raw spectral imagery and raw, possibly low quality, GPS/INS trajectory. We demonstrate that our approach allows for the automatic calibration of airborne systems with hyperspectral cameras, outperforms other state-of-the-art automatic rectification methods and reaches an accuracy on par with manual calibration methods.
△ Less
Submitted 10 September, 2024;
originally announced September 2024.
-
Highly-efficient electron ponderomotive acceleration in underdense plasmas
Authors:
Lorenzo Martelli,
Olena Kononenko,
Igor Andriyash,
Jonathan Wheeler,
Julien Gautier,
Jean-Philippe Goddet,
Amar Tafzi,
Ronan Lahaye,
Camilla Giaccaglia,
Alessandro Flacco,
Vidmantas Tomkus,
Migle Mackevičiūtė,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gečys,
Gediminas Račiukaitis,
Henri Kraft,
Xuan Quyen Dinh,
Cédric Thaury
Abstract:
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress h…
▽ More
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress has been made in increasing the beam's average current, which is essential for future laser-plasma-based applications. In this paper, we investigate a laser-plasma acceleration regime aimed at increasing the beam average current with energies up to few-MeVs, efficiently enhancing the beam charge. We present experimental results on configurations that allow reaching charges of $5-30\,$nC and a maximum conversion efficiency of around $14\,$%. Through comprehensive Particle-In-Cell simulations, we interpret the experimental results and present a detailed study on electron dynamics. From our analysis, we show that most electrons are not trapped in a plasma wave; rather, they experience ponderomotive acceleration. Thus, we prove the laser pulse as the main driver of the particles' energy gain process.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Use of spatiotemporal couplings and an axiparabola to control axial energy deposition velocity
Authors:
Aaron Liberman,
Ronan Lahaye,
Slava Smartsev,
Sheroy Tata,
Salome Benracassa,
Eitan Y. Levine,
Cedric Thaury,
Victor Malka
Abstract:
This paper presents the first experimental realization of a scheme that allows for the tuning of the axial energy deposition velocity of a focal spot with relativistic intensity. By combining a tunable pulse-front curvature with the axial energy deposition characteristics of the axiparabola, an aspheric optical element, this system allows for controlling the dynamics of laser-wakefield accelerator…
▽ More
This paper presents the first experimental realization of a scheme that allows for the tuning of the axial energy deposition velocity of a focal spot with relativistic intensity. By combining a tunable pulse-front curvature with the axial energy deposition characteristics of the axiparabola, an aspheric optical element, this system allows for controlling the dynamics of laser-wakefield accelerators. We demonstrate the ability to modify the axial energy deposition velocity of 100 TW laser pulses to be superluminal or subluminal. The experimental results are supported by theoretical calculations and simulations, strengthening the case for the axiparabola as a pertinent strategy to achieve dephasingless acceleration.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Spatiotemporal pulse characterization with far-field beamlet cross-correlation
Authors:
Slava Smartsev,
Sheroy Tata,
Aaron Liberman,
Michael Adelberg,
Arujash Mohanty,
Eitan Y. Levine,
Omri Seemann,
Yang Wan,
Eyal Kroupp,
Ronan Lahaye,
Cedric Thaury,
Victor Malka
Abstract:
We present a novel, straightforward method for spatiotemporal characterization of ultra-short laser pulses. The method employs far-field interferometry and inverse Fourier transform spectroscopy, built on the theoretical basis derived in this paper. It stands out in its simplicity: it requires few non-standard optical elements and simple analysis algorithms. This method was used to measure the spa…
▽ More
We present a novel, straightforward method for spatiotemporal characterization of ultra-short laser pulses. The method employs far-field interferometry and inverse Fourier transform spectroscopy, built on the theoretical basis derived in this paper. It stands out in its simplicity: it requires few non-standard optical elements and simple analysis algorithms. This method was used to measure the space-time intensity of our 100 TW class laser and to test the efficacy of a refractive doublet as a suppressor of pulse front curvature (PFC). The measured low-order spatiotemporal couplings agreed with ray-tracing simulations. In addition, we demonstrate a one-shot measurement technique, derived from our central method, which allows for quick and precise alignment of the compressor by pulse front tilt (PFT) minimization and for optimal refractive doublet positioning for the suppression of PFC.
△ Less
Submitted 26 February, 2022;
originally announced February 2022.
-
Controlled acceleration of GeV electron beams in an all-optical plasma waveguide
Authors:
Kosta Oubrerie,
Adrien Leblanc,
Olena Kononenko,
Ronan Lahaye,
Igor A. Andriyash,
Julien Gautier,
Jean-Philippe Goddet,
Lorenzo Martelli,
Amar Tafzi,
Kim Ta Phuoc,
Slava Smartsev,
Cedric Thaury
Abstract:
Laser-plasma accelerators produce electric fields of the order of 100 GV/m, more than 1000 times larger than radio-frequency accelerators. Thanks to this unique field strength, they appear as a promising path to generate electron beams beyond the TeV, for high-energy physics. Yet, large electric fields are of little benefit if they are not maintained over a long distance. It is therefore of the ut…
▽ More
Laser-plasma accelerators produce electric fields of the order of 100 GV/m, more than 1000 times larger than radio-frequency accelerators. Thanks to this unique field strength, they appear as a promising path to generate electron beams beyond the TeV, for high-energy physics. Yet, large electric fields are of little benefit if they are not maintained over a long distance. It is therefore of the utmost importance to guide the ultra-intense laser pulse that drives the accelerator. Reaching very high energies is equally useless if the properties of the electron beam change completely shot to shot. While present state-of-the-art laser-plasma accelerators can already separately address guiding and control challenges by tweaking the plasma structures, the production of beams combining high quality and high energy is yet to be demonstrated. Here we use a new approach for guiding the laser, and combined it with a controlled injection technique to demonstrate the reliable and efficient acceleration of high-quality electron beams up to 1.1 GeV, from a 50 TW-class laser.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Axiparabola: a new tool for high-intensity optics
Authors:
Kosta Oubrerie,
Igor A. Andriyash,
Ronan Lahaye,
Slava Smartsev,
Victor Malka,
Cédric Thaury
Abstract:
An axiparabola is a reflective aspherical optics that focuses a light beam into an extended focal line. The light intensity and group velocity profiles along the focus are adjustable through the proper design. The on-axis light velocity can be controlled, for instance, by adding spatio-temporal couplings via chromatic optics on the incoming beam. Therefore the energy deposition along the axis can…
▽ More
An axiparabola is a reflective aspherical optics that focuses a light beam into an extended focal line. The light intensity and group velocity profiles along the focus are adjustable through the proper design. The on-axis light velocity can be controlled, for instance, by adding spatio-temporal couplings via chromatic optics on the incoming beam. Therefore the energy deposition along the axis can be either subluminal or superluminal as required in various applications. This article first explores how the axiparabola design defines its properties in the geometric optics approximation. Then the obtained description is considered in numerical simulations for two cases of interest for laser-plasma acceleration. We show that the axiparabola can be used either to generate a plasma waveguide to overcome diffraction or for driving a dephasingless wakefield accelerator.
△ Less
Submitted 1 July, 2021; v1 submitted 12 June, 2021;
originally announced June 2021.
-
Distributed Compilation System for High-Speed Software Build Processes
Authors:
Geunsik Lim,
Minho Lee,
R. J. W. E. Lahaye,
Young Ik Eom
Abstract:
The idle time of personal computers has increased steadily due to the generalization of computer usage and cloud computing. Clustering research aims at utilizing idle computer resources for processing a variable workload on a large number of computers. The workload is processed continually despite the volatile status of the individual computer resources. This paper proposes a distributed compilati…
▽ More
The idle time of personal computers has increased steadily due to the generalization of computer usage and cloud computing. Clustering research aims at utilizing idle computer resources for processing a variable workload on a large number of computers. The workload is processed continually despite the volatile status of the individual computer resources. This paper proposes a distributed compilation system for improving the processing speed of CPU-intensive software compilations. This significantly reduces the compilation time of mass sources by using the idle resources. We expect gains of up to 65% compared to non-distributed compilation systems.
△ Less
Submitted 21 January, 2021;
originally announced January 2021.
-
Development of strategies to improve the students' learning by participation in class and out-of-classroom
Authors:
Rob J. W. E. Lahaye,
N. Karjanto
Abstract:
This report discusses our experience in implementing nontraditional teaching approach of General Physics and Calculus courses at Sungkyunkwan University, South Korea. We endeavour to improve the students' learning skills both inside and out-of-classroom. The teaching approach emphasizes active learning and this includes problem-based learning and guided-discovery. We also analyze the effects on an…
▽ More
This report discusses our experience in implementing nontraditional teaching approach of General Physics and Calculus courses at Sungkyunkwan University, South Korea. We endeavour to improve the students' learning skills both inside and out-of-classroom. The teaching approach emphasizes active learning and this includes problem-based learning and guided-discovery. We also analyze the effects on and responses of the students on their learning experience.
△ Less
Submitted 27 May, 2015; v1 submitted 26 May, 2015;
originally announced May 2015.
